Use clang++ for C++ for the linux-x86_64-clang target

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Engine afalg: properly set operation type also on big endian.

Copy the whole ALG_OP_TYPE to CMSG_DATA.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix style issue

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1694)

Constify command options

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1694)

Fix C++ support: set $target{cxx} correctly

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix typo

I think the second "VC-WIN32" should be "VC-WIN64".
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
CLA: trivial

Configure: remove superfluous 0x

The number is taken from the OPENSSL_VERSION_NUMBER which is already
in the hex form.

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1706)

Add memory leak detection to d2i_test

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1707)

Fix copy-paste test labels

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove automatic RPATH - Add a CHANGES entry

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove automatic RPATH - adapt shlib_wrap.sh

Looking for something starting with '-Wl,-rpath,' isn't good enough,
as someone might give something like '-Wl,--enable-new-dtags,-rpath,/PATH'.
Looking for ',-rpath,' should be safe enough.

We could remove the preloading stuff entirely, but just in case the
user has chosen to given RPATH setting arguments at configuration,
we'd better make sure testing will still work.  Fair warning, there
are some configuration options that do not work with preloaded OpenSSL
libraries, such as the sanity checking ones.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove automatic RPATH - add user rpath support

Make Configure recognise -rpath and -R to support user added rpaths
for OSF1 and Solaris.  For convenience, add a variable LIBRPATH in the
Unix Makefile, which the users can use as follows:

    ./config [options] -Wl,-rpath,\$(LIBRPATH)

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove automatic RPATH

Before OpenSSL 1.1.0, binaries were installed in a non-standard
location by default, and runpath directories were therefore added in
those binaries, to make sure the executables would be able to find the
shared libraries they were linked with.

With OpenSSL 1.1.0 and on, binaries are installed in standard
directories by default, and the addition of runpath directories is
therefore not needed any more.

Reviewed-by: Rich Salz <rsalz@openssl.org>

RT is put out to pasture

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1702)

Add C++ settings in the Linux config targets

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add support for C++ in Configurations/unix-Makefile.tmpl

Note that it relies on a trick from Configure, where file names for
object files made from C++ source get '.cc' replaced with '_cc.o' to
recognise them.  This is needed so the correct compiler is used when
linking binaries.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add support for C++ in Configure

A note: this will form object file names by changing '.cc' to
'_cc.o'.  This will permit other configuration code to recognise these
object files were built for C++ rather than C.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix X509_NAME decode for malloc failures.

The original X509_NAME decode free code was buggy: this
could result in double free or leaks if a malloc failure
occurred.

Simplify and fix the logic.

Thanks to Guido Vranken for reporting this issue.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1691)

doc/crypto/OPENSSL_ia32cap.pod: update assembler requirements.

Reviewed-by: Richard Levitte <levitte@openssl.org>

.travis.yml: minor optimizations:

- make 'pip install --user cpp-coveralls' conditional;
- limit no-stdio to single build per operating environment;
- omit enable-asan duplicate;

Reviewed-by: Richard Levitte <levitte@openssl.org>

.travis.yml: install wine on demand.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix up bn_prime.pl formatting.

Align at 5 characters, not 4. There are 5-digit numbers in the output.
Also avoid emitting an extra blank line and trailing whitespace.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Remove trailing whitespace from some files.

The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:

  find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
  find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
  find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'

Then bn_prime.h was excluded since this is a generated file.

Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Add some missing types to indent.pro

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Update fuzz corpora

New minimal fuzz corpora for asn1, asn1parse, bndiv, crl and x509

Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #1678

Fix linebreaks in the tls_construct_client_certificate function

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a typedef for the construction function

Reviewed-by: Rich Salz <rsalz@openssl.org>

Move setting of the handshake header up one more level

We now set the handshake header, and close the packet directly in the
write_state_machine. This is now possible because it is common for all
messages.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove the special case processing for finished construction

tls_construct_finished() used to have different arguments to all of the
other construction functions. It doesn't anymore, so there is no neeed to
treat it as a special case.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Harmonise setting the header and closing construction

Ensure all message types work the same way including CCS so that the state
machine doesn't need to know about special cases. Put all the special logic
into ssl_set_handshake_header() and ssl_close_construct_packet().

Reviewed-by: Rich Salz <rsalz@openssl.org>

Don't set the handshake header in every message

Move setting the handshake header up a level into the state machine code
in order to reduce boilerplate.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Move init of the WPACKET into write_state_machine()

Instead of initialising, finishing and cleaning up the WPACKET in every
message construction function, we should do it once in
write_state_machine().

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove untrue comment.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Make dependencies if Makefile is new.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Rename ssl_set_handshake_header2()

ssl_set_handshake_header2() was only ever a temporary name while we had
to have ssl_set_handshake_header() for code that hadn't been converted to
WPACKET yet. No code remains that needed that so we can rename it.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove ssl_set_handshake_header()

Remove the old ssl_set_handshake_header() implementations. Later we will
rename ssl_set_handshake_header2() to ssl_set_handshake_header().

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove the tls12_get_sigandhash_old() function

This is no longer needed now that all messages use WPACKET

Reviewed-by: Rich Salz <rsalz@openssl.org>

fix memory leak

Reviewed-by: Rich Salz <rsalz@openssl.org>

Don't use DES when disabled.

Reviewed-by: Rich Salz <rsalz@openssl.org>

fix memory leak

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add SRP test vectors from RFC5054

Reviewed-by: Rich Salz <rsalz@openssl.org>

SRP code tidy.

Tidy up srp_Calc_k and SRP_Calc_u by making them a special case of
srp_Calc_xy which performs SHA1(PAD(x) | PAD(y)).

This addresses an OCAP Audit issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Convert NewSessionTicket construction to WPACKET

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix an error in packet_locl.h

A convenience macro was using the wrong underlying function.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Convert CertStatus message construction to WPACKET

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix mis-named macro in packet_locl.h

A couple of the WPACKET_sub_memcpy* macros were mis-named.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Convert SeverDone construction to WPACKET

Reviewed-by: Rich Salz <rsalz@openssl.org>

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>

Print <ABSENT> if a STACK is NULL.

If a STACK (corresponding to SEQUENCE OF or SET OF) is NULL then the
field is absent as opposed to empty (present but has zero elements).

Reviewed-by: Rich Salz <rsalz@openssl.org>

add item list support to d2i_test

Reviewed-by: Rich Salz <rsalz@openssl.org>

ASN1_ITEM should use type name not structure name.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add -item option to asn1parse

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add ASN1_ITEM lookup and enumerate functions.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix missing NULL checks in NewSessionTicket construction

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix an mis-matched function code so that "make update" doesn't fail

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add an example of usage to the WPACKET_reserve_bytes() documentation

Reviewed-by: Rich Salz <rsalz@openssl.org>

Address style feedback comments

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix a bug in CKE construction for PSK

In plain PSK we don't need to do anymore construction after the preamble.
We weren't detecting this case and treating it as an unknown cipher.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Convert ServerKeyExchange construction to WPACKET

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add the WPACKET_reserve_bytes() function

WPACKET_allocate_bytes() requires you to know the size of the data you
are allocating for, before you create it. Sometimes this isn't the case,
for example we know the maximum size that a signature will be before we
create it, but not the actual size. WPACKET_reserve_bytes() enables us to
reserve bytes in the WPACKET, but not count them as written yet. We then
subsequently need to acall WPACKET_allocate_bytes to actually count them as
written.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove tls12_copy_sigalgs_old()

This was a temporary function needed during the conversion to WPACKET. All
callers have now been converted to the new way of doing this so this
function is no longer required.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Convert CertificateRequest construction to WPACKET

Reviewed-by: Rich Salz <rsalz@openssl.org>

Address style feedback comments

Merge declarations of same type together.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix a bug in the construction of the ClienHello SRTP extension

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix heartbeat compilation error

Reviewed-by: Rich Salz <rsalz@openssl.org>

Delete some unneeded code

Some functions were being called from both code that used WPACKETs and code
that did not. Now that more code has been converted to use WPACKETs some of
that duplication can be removed.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Convert ServerHello construction to WPACKET

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix an Uninit read in DTLS

If we have a handshake fragment waiting then dtls1_read_bytes() was not
correctly setting the value of recvd_type, leading to an uninit read.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix no-dtls

The new large message test in sslapitest needs OPENSSL_NO_DTLS guards

Reviewed-by: Richard Levitte <levitte@openssl.org>

apps/apps.c: initialize and de-initialize engine around key loading

Before loading a key from an engine, it may need to be initialized.
When done loading the key, we must de-initialize the engine.
(if the engine is already initialized somehow, only the reference
counter will be incremented then decremented)

Reviewed-by: Stephen Henson <steve@openssl.org>

Revert "Call ENGINE_init() before trying to use keys from engine"

This reverts commit 0a72002993b8619fd0642d19af3364bafbd9a06c.
This fails to call ENGINE_finish; an alternate fix is forthcoming.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Call ENGINE_init() before trying to use keys from engine

When I said before that s_client "used to work in 1.0.2" that was only
partly true. It worked for engines which provided a default generic
method for some key type, because it called ENGINE_set_default() and
that ended up being an implicit initialisation and functional refcount.

But an engine which doesn't provide generic methods doesn't get initialised,
and then when you try to use it you get an error:

cannot load client certificate private key file from engine
140688147056384:error:26096075:engine routines:ENGINE_load_private_key:not initialised:crypto/engine/eng_pkey.c:66:
unable to load client certificate private key file

cf. https://github.com/OpenSC/libp11/issues/107 (in which we discover
that engine_pkcs11 *used* to provide generic methods that OpenSSL would
try to use for ephemeral DH keys when negotiating ECDHE cipher suites in
TLS, and that didn't work out very well.)

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1639)

Restore '-keyform engine' support for s_client

This used to work in 1.0.2 but disappeared when the argument parsing was
revamped.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1639)

Add DTLS renegotiation tests

Reviewed-by: Rich Salz <rsalz@openssl.org>

Extend the renegotiation tests

Add the ability to test both server initiated and client initiated reneg.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Update README.ssltest.md

Add update for testing renegotiation. Also change info on CTLOG_FILE
environment variable - which always seems to be required.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add support for testing renegotiation

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix a bug in Renegotiation extension construction

The conversion to WPACKET broke the construction of the renegotiation
extension.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Convert HelloRequest construction to WPACKET

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add missing parameter.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Switch back to assuming TLS 1.2.

The TLSProxy::Record->new call hard-codes a version, like
70-test_sslrecords.t.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Address review comments.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Don't test quite so many of them.

Avoid making the CI blow up.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Test CBC mode padding.

This is a regression test for
https://github.com/openssl/openssl/pull/1431. It tests a
maximally-padded record with each possible invalid offset.

This required fixing a bug in Message.pm where the client sending a
fatal alert followed by close_notify was still treated as success.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix some mem leaks in sslapitest

A mem leak could occur on an error path. Also the mempacket BIO_METHOD
needs to be cleaned up, because of the newly added DTLS test.

Also fixed a double semi-colon in ssltestlib.c

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a basic test for BN_bn2dec.

This would have caught 099e2968ed3c7d256cda048995626664082b1b30. This is
a port of the test added in
https://boringssl.googlesource.com/boringssl/+/7c040756178e14a4d181b6d93abb3827c93189c4

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1496)

Fix HelloVerifyRequest construction

commit c536b6be1a introduced a bug that causes a reachable assert. This fixes
it.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Updates CHANGES and NEWS for new release

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add to fuzz corpora for CVE-2016-6309

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix Use After Free for large message sizes

The buffer to receive messages is initialised to 16k. If a message is
received that is larger than that then the buffer is "realloc'd". This can
cause the location of the underlying buffer to change. Anything that is
referring to the old location will be referring to free'd data. In the
recent commit c1ef7c97 (master) and 4b390b6c (1.1.0) the point in the code
where the message buffer is grown was changed. However s->init_msg was not
updated to point at the new location.

CVE-2016-6309

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Fix a WPACKET bug

If we request more bytes to be allocated than double what we have already
written, then we grow the buffer by the wrong amount.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Add a test for large messages

Ensure that we send a large message during the test suite.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Convert HelloVerifyRequest construction to WPACKET

We actually construct a HelloVerifyRequest in two places with common code
pulled into a single function. This one commit handles both places.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add warning about a potential pitfall with WPACKET_allocate_bytes()

If the underlying BUF_MEM gets realloc'd then the pointer returned could
become invalid. Therefore we should always ensure that the allocated
memory is filled in prior to any more WPACKET_* calls.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add -Wswitch-enum

Change code so when switching on an enumeration, have case's for all
enumeration values.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Updates CHANGES and NEWS for new release

Reviewed-by: Richard Levitte <levitte@openssl.org>

Avoid KCI attack for GOST

Russian GOST ciphersuites are vulnerable to the KCI attack because they use
long-term keys to establish the connection when ssl client authorization is
on. This change brings the GOST implementation into line with the latest
specs in order to avoid the attack. It should not break backwards
compatibility.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix a hang with SSL_peek()

If while calling SSL_peek() we read an empty record then we go into an
infinite loop, continually trying to read data from the empty record and
never making any progress. This could be exploited by a malicious peer in
a Denial Of Service attack.

CVE-2016-6305

GitHub Issue #1563

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix a mem leak in NPN handling

If a server sent multiple NPN extensions in a single ClientHello then a
mem leak can occur. This will only happen where the client has requested
NPN in the first place. It does not occur during renegotiation. Therefore
the maximum that could be leaked in a single connection with a malicious
server is 64k (the maximum size of the ServerHello extensions section). As
this is client side, only occurs if NPN has been requested and does not
occur during renegotiation this is unlikely to be exploitable.

Issue reported by Shi Lei.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add some more OCSP testing

Test that the OCSP callbacks work as expected.

Reviewed-by: Rich Salz <rsalz@openssl.org>