- explicit_bzero has limited scope/usage only for security/crypto purposes but is non-optimisable version of memset/0 and bzero.
- explicit_memset has similar signature and semantics as memset but is also a non-optimisable version.
Adrian Prantl [Tue, 11 Dec 2018 16:58:43 +0000 (16:58 +0000)]
Reuse code from CGDebugInfo::getOrCreateFile() when creating the file
for the DICompileUnit.
This addresses post-commit feedback for D55085. Without this patch, a
main source file with an absolute paths may appear in different
DIFiles, once with the absolute path and once with the common prefix
between the absolute path and the current working directory.
George Karpenkov [Tue, 11 Dec 2018 01:14:17 +0000 (01:14 +0000)]
[analyzer] Remove memoization from RunLoopAutoreleaseLeakChecker
Memoization dose not seem to be necessary, as other statement visitors
run just fine without it,
and in fact seems to be causing memory corruptions.
Just removing it instead of investigating the root cause.
Fangrui Song [Mon, 10 Dec 2018 18:10:35 +0000 (18:10 +0000)]
ComputeLineNumbers: delete SSE2 vectorization
Summary:
SSE2 vectorization was added in 2012, but it is 2018 now and I can't
observe any performance boost (testing clang -E [all Sema/* CodeGen/* with proper -I options]) with the existing _mm_movemask_epi8+countTrailingZeros or the following SSE4.2 (compiling with -msse4.2):
Michael Kruse [Mon, 10 Dec 2018 15:16:37 +0000 (15:16 +0000)]
Use zip_longest for iterator range comparisons. NFC.
Use zip_longest in two locations that compare iterator ranges.
zip_longest allows the iteration using a range-based for-loop and to be
symmetric over both ranges instead of prioritizing one over the other.
In that latter case code have to handle the case that the first is
longer than the second, the second is longer than the first, and both
are of the same length, which must partially be checked after the loop.
With zip_longest, this becomes an element comparison within the loop
like the comparison of the elements themselves. The symmetry makes it
clearer that neither the first and second iterators are handled
differently. The iterators are not event used directly anymore, just
the ranges.
[OpenCL][CodeGen] Fix replacing memcpy with addrspacecast
Summary:
If a function argument is byval and RV is located in default or alloca address space
an optimization of creating addrspacecast instead of memcpy is performed. That is
not correct for OpenCL, where that can lead to a situation of address space casting
from __private * to __global *. See an example below:
Craig Topper [Mon, 10 Dec 2018 06:07:59 +0000 (06:07 +0000)]
[X86] Remove the addcarry builtins. Leaving only the addcarryx builtins since that matches gcc.
The addcarry and addcarryx builtins do the same thing. The only difference is that addcarryx previously required adx feature.
This commit removes the adx feature check from addcarryx and removes the addcarry builtin. This matches the builtins that gcc has. We don't guarantee compatibility in builtins, but we generally try to be consistent if its not a burden.
Stephen Kelly [Sun, 9 Dec 2018 13:33:30 +0000 (13:33 +0000)]
NFC: Rename TemplateDecl dump utilities
There is a clang::TemplateDecl AST type, so a method called
VisitTemplateDecl looks like it should 'override' the method from the
base visitor, but it does not because of the extra parameters it takes.
In reality, these methods are utilities, so name them like utilities.
Pete Cooper [Sat, 8 Dec 2018 05:13:50 +0000 (05:13 +0000)]
Convert some ObjC msgSends to runtime calls.
It is faster to directly call the ObjC runtime for methods such as alloc/allocWithZone instead of sending a message to those functions.
This patch adds support for converting messages to alloc/allocWithZone to their equivalent runtime calls.
Tests included for the positive case of applying this transformation, negative tests that we ensure we only convert "alloc" to objc_alloc, not "alloc2", and also a driver test to ensure we enable this only for supported runtime versions.
Richard Trieu [Sat, 8 Dec 2018 05:05:03 +0000 (05:05 +0000)]
Move diagnostic enums into Basic.
Move enums from */*Diagnostic.h to Basic/Diagnostic*.h. Basic/AllDiagnostics.h
needs all the enums and moving the sources to Basic prevents a Basic->*->Basic
dependency loop. This also allows each Basic/Diagnostics*Kinds.td to have a
header at Basic/Diagnostic*.h (except for Common). The old headers are kept in place since other packages are still using them.
Stop tracking retain count of OSObject after escape to void * / other primitive types
Escaping to void * / uint64_t / others non-OSObject * should stop tracking,
as such functions can have heterogeneous semantics depending on context,
and can not always be annotated.
[tests] Fix the FileManagerTest getVirtualFile test on Windows
Summary: The test passes on Windows only when it is executed on the C: drive. If the build and tests run on a different drive, the test is currently failing.
[Preprocessor] Don't avoid entering included files after hitting a fatal error.
Change in r337953 violated the contract for `CXTranslationUnit_KeepGoing`:
> Do not stop processing when fatal errors are encountered.
Use different approach to fix long processing times with multiple inclusion
cycles. Instead of stopping preprocessing for fatal errors, do this after
reaching the max allowed include depth and only for the files that were
processed already. It is likely but not guaranteed those files cause a cycle.
The option has no tests, is not used anywhere, and is actually
incorrect: it prints the line number without the reference to a file,
which can be outright incorrect.
Gabor Marton [Fri, 7 Dec 2018 16:32:43 +0000 (16:32 +0000)]
[CTU] Add triple/lang mismatch handling
Summary:
We introduce a strict policy for C++ CTU. It can work across TUs only if
the C++ dialects are the same. We neither allow C vs C++ CTU. We do this
because the same constructs might be represented with different properties in
the corresponding AST nodes or even the nodes might be completely different (a
struct will be RecordDecl in C, but it will be a CXXRectordDecl in C++, thus it
may cause certain assertions during cast operations).
Gabor Marton [Fri, 7 Dec 2018 16:05:58 +0000 (16:05 +0000)]
[CTU] Add more lit tests and better error handling
Summary:
Adding some more CTU list tests. E.g. to check if a construct is unsupported.
We also slightly modify the handling of the return value of the `Import`
function from ASTImporter.
Erich Keane [Fri, 7 Dec 2018 15:31:23 +0000 (15:31 +0000)]
Make CPUDispatch resolver emit dependent functions.
Inline cpu_specific versions referenced before the cpu_dispatch function
weren't properly emitted, since they hadn't been referred to. This
patch ensures that during resolver generation that all appropriate
versions are emitted.
Gabor Marton [Fri, 7 Dec 2018 14:56:02 +0000 (14:56 +0000)]
[CTU] Add DisplayCTUProgress analyzer switch
Summary:
With a new switch we may be able to print to stderr if a new TU is being loaded
during CTU. This is very important for higher level scripts (like CodeChecker)
to be able to parse this output so they can create e.g. a zip file in case of
a Clang crash which contains all the related TU files.
Ilya Biryukov [Fri, 7 Dec 2018 13:17:52 +0000 (13:17 +0000)]
[CodeComplete] Fix assertion failure
Summary:
...that fires when running completion inside an argument of
UnresolvedMemberExpr (see the added test).
The assertion that fires is from Sema::TryObjectArgumentInitialization:
assert(FromClassification.isLValue());
This happens because Sema::AddFunctionCandidates does not account for
object types which are pointers. It ends up classifying them incorrectly.
All usages of the function outside code completion are used to run
overload resolution for operators. In those cases the object type being
passed is always a non-pointer type, so it's not surprising the function
did not expect a pointer in the object argument.
However, code completion reuses the same function and calls it with the
object argument coming from UnresolvedMemberExpr, which can be a pointer
if the member expr is an arrow ('->') access.
Extending AddFunctionCandidates to allow pointer object types does not
seem too crazy since all the functions down the call chain can properly
handle pointer object types if we properly classify the object argument
as an l-value, i.e. the classification of the implicitly dereferenced
pointer.
Gabor Marton [Fri, 7 Dec 2018 12:29:02 +0000 (12:29 +0000)]
[CTU] Eliminate race condition in CTU lit tests
Summary:
We plan to introduce additional CTU related lit test. Since lit may run the
tests in parallel, it is not safe to use the same directory (%T) for these
tests. It is safe to use however test case specific directories (%t).
Kang Zhang [Fri, 7 Dec 2018 08:58:12 +0000 (08:58 +0000)]
[PowerPC] VSX register support for inline assembly
Summary:
The patch is to add the VSX register support for inline assembly. After this
patch, we can use VSX register in inline assembly clobber list without error.
Hans Wennborg [Fri, 7 Dec 2018 08:17:26 +0000 (08:17 +0000)]
Fix thunks returning memptrs via sret by emitting also scalar return values directly in sret slot (PR39901)
Thunks that return member pointers via sret are broken due to using temporary
storage for the return value on the stack and then passing that pointer to a
tail call, violating the rule that a tail call can't access allocas in the
caller (see bug).
Since r90526, we put aggregate return values directly in the sret slot, but
this doesn't apply to member pointers which are considered scalar.
Unless I'm missing something subtle, we should be able to always use the sret
slot directly for indirect return values.
Nico Weber [Thu, 6 Dec 2018 18:50:39 +0000 (18:50 +0000)]
Allow forwarding -fdebug-compilation-dir to cc1as
The flag -fdebug-compilation-dir is useful to make generated .o files
independent of the path of the build directory, without making the compile
command-line dependent on the path of the build directory, like
-fdebug-prefix-map requires. This change makes it so that the driver can
forward the flag to -cc1as, like it already can for -cc1. We might want to
consider making -fdebug-compilation-dir a driver flag in a follow-up.
(Since -fdebug-compilation-dir defaults to PWD, it's already possible to get
this effect by setting PWD, but explicit compiler flags are better than env
vars, because e.g. ninja tracks command lines and reruns commands that change.)
This patch looks at any common prefix between the compilation
directory and the (absolute) file path and strips the redundant
part. More importantly it leaves the compilation directory empty if
the two paths have no common prefix.
After this patch the above entry is (assuming a compilation dir of "/Volumes/Data/llvm/_build"):
Alexey Bataev [Thu, 6 Dec 2018 15:35:13 +0000 (15:35 +0000)]
[OPENMP][NVPTX] Fix globalization of the mapped array sections.
If the array section is based on pointer and this sections is mapped in
target region + then it is used in the inner parallel region, it also
must be globalized as the pointer itself is passed by value, not by
reference.
Serge Pavlov [Thu, 6 Dec 2018 09:35:04 +0000 (09:35 +0000)]
Diagnose friend function template redefinitions.
Friend function template defined in a class template becomes available if
the enclosing class template is instantiated. Until the function template
is used, it does not have a body, but still is considered a definition for
the purpose of redeclaration checks.
This change modifies redefinition check so that it can find the friend
function template definitions in instantiated classes.
ARM, AArch64: support `__attribute__((__swiftcall__))`
Support the Swift calling convention on Windows ARM and AArch64. Both
of these conform to the AAPCS, AAPCS64 calling convention, and LLVM has
been adjusted to account for the register usage. Ensure that the
frontend passes this into the backend. This allows the swift runtime to
be built for Windows.
Leonard Chan [Thu, 6 Dec 2018 01:05:54 +0000 (01:05 +0000)]
[Sema/Attribute] Check for noderef attribute
This patch adds the noderef attribute in clang and checks for dereferences of
types that have this attribute. This attribute is currently used by sparse and
would like to be ported to clang.
Leonard Chan [Thu, 6 Dec 2018 00:10:36 +0000 (00:10 +0000)]
[Sema] Push and Pop Expression Evaluation Context Records at the start and end of function definitions
This patch creates a new context for every function definition we enter.
Currently we do not push and pop on these, usually working off of the global
context record added in the Sema constructor, which never gets popped.
projects / clang / log