Tom Finegan [Thu, 5 Feb 2015 00:11:57 +0000 (16:11 -0800)]
Xcode: Fix includes in examples.
The current file's directory, ".", is treated much more literally
when building libvpx examples with Xcode than it is with make, and
clang cannot find common include files included via "./" when those
files actually reside one directory up in the tree.
Jingning Han [Wed, 21 Jan 2015 17:32:23 +0000 (09:32 -0800)]
Account for chroma component costs in RTC mode decision
This commit allows the encoder to account for additional chroma
plane costs in the mode decision process, if the current block
potentially contains significant color change. It improves the
visual quality at very low bit-rates.
The compression performance of dark720p is improved by 12.39% in
speed 6. For jimred at 150 kbps, the PSNR of V component (red)
increased by 0.2 dB, at the expense of about 5% increase in
encoding time. Note that for sequences where the chroma components
are fairly consistent, the encoding time increase is negligible.
On average the rtc set compression performance is improved by
1.172% in PSNR and 1.920% in SSIM.
This patch continues the work to remove frame_parallel_decoding_mode
requirement in VP9 multi-threaded tile decoder. In order to do that,
the frame counts associated to each thread need to be accumulated
together after the frame is decoded.
Yunqing Wang [Fri, 30 Jan 2015 18:14:44 +0000 (10:14 -0800)]
vp9_dthread: pass frame counts to decoder functions
The current multi-threaded tile decoder requires that the videoes
are encoded with frame_parallel_decoding_mode = 1. This requirement
is not necessary, and is better to be removed. This patch includes
the first part of the work.
Johann [Tue, 3 Feb 2015 17:02:50 +0000 (09:02 -0800)]
Use correct buffer size in vp8 subpixel variance
In vp8_sub_pixel_variance8x8_neon the temp2 buffer is only initialized
to kHeight8 * kWidth8. However, in the case that xoffset != 0 and
yoffset == 0, var_filter_block2d_bil_w8 is called with output_width
kHeight8PlusOne.
Thanks to cmugurel for diagnosing and yulius for the patch.
Yaowu Xu [Mon, 2 Feb 2015 16:05:31 +0000 (08:05 -0800)]
adjust rtc setting and threshold
1. Adjusted the threshold for coef update computation based on counts
of tx used, avoid coef update computation when count is low (<20)
2. Move sf->lpf_pick = LPF_PICK_MINIMAL_LPF to speed 8.
hkuang [Tue, 27 Jan 2015 20:26:28 +0000 (12:26 -0800)]
Try again to merge branch 'frame-parallel' into master branch.
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls.
Current frame parallel decode will only speed up the decoding for frame
parallel encoded videos. For non frame parallel encoded videos, frame
parallel decode is slower than serial decode due to lack of loopfilter
worker thread.
There are still some known issues that need to be addressed. For example:
decode frame parallel videos with segmentation enabled is not right sometimes.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Yaowu Xu [Thu, 29 Jan 2015 18:22:48 +0000 (10:22 -0800)]
Optimize coef update
1. move the check of search method of USE_TX_8X8 up one level to
avoid operations of build_tree_distributions()
2. count tx used and avoid computaton for coef udpate when one size
is not used at all.
Yunqing Wang [Thu, 29 Jan 2015 19:33:50 +0000 (11:33 -0800)]
Enable use_x86inc for 32bit pic enabled Darwin target
The previous patch "Fix issues in 32bit PIC enabled build" fixed
the x86inc.asm for macho32. Now we can enable use_x86inc while
building libvpx for 32bit pic enabled Darwin target, which makes
the encoder a lot faster(>2X) in this case by turning on the
existing optimizations.
Yunqing Wang [Tue, 27 Jan 2015 05:35:07 +0000 (21:35 -0800)]
Fix issues in 32bit PIC enabled build
This patch was to fix issue 924:
https://code.google.com/p/webm/issues/detail?id=924
The SECTION_RODATA macro was modified to support macho32 format.
The sub-pixel functions were modified to pass in 2 more parameters
to handle the global offsets for PIC build.
The current method doesn't work with Xcode 4 and up, since they no
longer have a $DEVELOPER_DIR/SDKs directory. Using xcrun and xcodebuild
works all the way back to Xcode 3 on OS X 10.6 Snow Leopard, if not
earlier.
Yaowu Xu [Mon, 26 Jan 2015 23:29:15 +0000 (15:29 -0800)]
move clear_system_state() call before using double
Floating point is used in vp9_convert_qindex_to_q(), so sometime unit
test ActiveMapTest would cause run time error without properly call
to clear_system_state to reset register status.
Marco [Thu, 22 Jan 2015 00:09:13 +0000 (16:09 -0800)]
aq-mode=3: Update to allow for refresh on modes other than zero-mv.
Add distortion threshold condition to refresh state of a coding block,
and allow for qp adjustment also for some intra modes and non-zero motion modes.
Also some code cleanup (remove unused variables/code).
Paul Wilkins [Tue, 20 Jan 2015 23:23:57 +0000 (15:23 -0800)]
Adjust active maxq for GF groups.
Currently disabled by default: enabled using
#define GROUP_ADAPTIVE_MAXQ
In this patch the active max Q is adjusted for each GF
group based on the vbr bit allocation and raw first pass
group error.
This will tend to give a lower q for easy sections
and a higher value for very hard sections. As such it is
expected to improve quality in some of the easier
sections where quality issues have been reported.
This change tends to hurt overall psnr but help
average psnr. SSIM also shows a small gain.
Average results for derf, yt, std-hd and yt-hd test sets were
as follows (%change for average psnr, overal psnr and ssim):-
Yaowu Xu [Thu, 22 Jan 2015 23:27:43 +0000 (15:27 -0800)]
Replace divide with look-up
This commit replaces an integer divide with a table-lookup. It is
to improve decoding speed, and at the same time, to reduce possible
complications with a bug in AMD Family 12h processors:
"665 Integer Divide Instruction May Cause Unpredictable Behavior"
hkuang [Wed, 21 Jan 2015 22:51:08 +0000 (14:51 -0800)]
Merge branch 'frame-parallel' to enable frame parallel decode in master branch.
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls. VP9 frame parallel decode is >30% faster than serial
decode with tile parallel threading which will makes devices play 1080P
VP9 videos more easily.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Paul Wilkins [Wed, 21 Jan 2015 19:32:27 +0000 (11:32 -0800)]
Bug when last group before forced key frame is short.
Just before a forced key frame we often get a foreshortened
arf/gf group. In such a case, we do not want to update
rc->last_boosted_qindex, which is used to define the Q range
for the forced key frame itself.
This gives a small average metrics gain for the YT and YT-HD sets
(eg. YT SSIM +0.141%).
projects / libvpx / log