Fujii Masao [Fri, 3 Feb 2017 18:18:13 +0000 (03:18 +0900)]
Be sure to release LogicalRepLauncherLock in DROP SUBSCRIPTION command.
Previously DROP SUBSCRIPTION command forgot to release the lock at all.
Original patches by Kyotaro Horiguchi and Michael Paquier,
but I didn't use them.
Discussion: http://postgr.es/m/20170201.173623.66249355.horiguchi.kyotaro@lab.ntt.co.jp
Tom Lane [Fri, 3 Feb 2017 16:34:41 +0000 (11:34 -0500)]
In pageinspect/hashfuncs.c, avoid crashes on alignment-picky machines.
On machines with MAXALIGN = 8, the payload of a bytea is not maxaligned,
since it will start 4 bytes into a palloc'd value. On alignment-picky
hardware, this will cause failures in accesses to 8-byte-wide values
within the page. We already encountered this problem when we introduced
GIN index inspection functions, and fixed it in commit 84ad68d64. Make
use of the same function for hash indexes.
A small difficulty is that up to now contrib/pageinspect has not shared
any functions at all across files. To support that, introduce a common
header file "pageinspect.h" for the module.
Also, move get_page_from_raw() out of ginfuncs.c, where it didn't
especially belong, and put it in rawpage.c which seems a more natural home.
Tom Lane [Fri, 3 Feb 2017 04:11:08 +0000 (23:11 -0500)]
Fix a bunch more portability bugs in commit 08bf6e529.
It seems like somebody used a dartboard while choosing integer widths
for the various values taken and returned by these functions ... and
then threw a fresh set of darts while writing the SQL declarations.
This patch brings the C code into line with what the SQL declarations
say, which is enough to make it not dump core on the particular 32-bit
machine I'm testing on. But I think we could do with another round
of looking at what the datum widths *should* be. For instance, it's
not all that sensible that hash_bitmap_info decided to use int64 to
represent a BlockNumber input when get_raw_page doesn't do it that way.
There's also a remaining problem that the expected outputs from the
test script are platform-dependent, but I'll leave that issue for
somebody else.
Robert Haas [Fri, 3 Feb 2017 03:29:29 +0000 (22:29 -0500)]
pageinspect: Try to fix some bugs in previous commit.
Commit 08bf6e529587e1e9075d013d859af2649c32a511 seems not to have
used the correct *GetDatum and PG_GETARG_* macros for the SQL types
in some cases, and some of the SQL types seem to have been poorly
chosen, too. Try to fix it. I'm not sure if this is the reason
why the buildfarm is currently unhappy with this code, but it
seems like a good place to start.
Tom Lane [Fri, 3 Feb 2017 01:16:17 +0000 (20:16 -0500)]
Clean up psql's behavior for a few more control variables.
Modify FETCH_COUNT to always have a defined value, like other control
variables, mainly so it will always appear in "\set" output.
Add hooks to force HISTSIZE to be defined and require it to have an
integer value. (I don't see any point in allowing it to be set to
non-integral values.)
Add hooks to force IGNOREEOF to be defined and require it to have an
integer value. Unlike the other cases, here we're trying to be
bug-compatible with a rather bogus externally-defined behavior, so I think
we need to continue to allow "\set IGNOREEOF whatever". Fix it so that
the substitution hook silently replace non-numeric values with "10",
so that the stored value always reflects what we're really doing.
Add a dummy assign hook for HISTFILE, just so it's always in
variables.c's list. We can't require it to be defined always, because
that would break the interaction with the PSQL_HISTORY environment
variable, so there isn't any change in visible behavior here.
Remove tab-complete.c's private list of known variable names, since that's
really a maintenance nuisance. Given the preceding changes, there are no
control variables it won't show anyway. This does mean that if for some
reason you've unset one of the status variables (DBNAME, HOST, etc), that
variable would not appear in tab completion for \set. But I think that's
fine, for at least two reasons: we shouldn't be encouraging people to use
those variables as regular variables, and if someone does do so anyway,
why shouldn't it act just like a regular variable?
Remove ugly and no-longer-used-anywhere GetVariableNum(). In general,
future additions of integer-valued control variables should follow the
paradigm of adding an assign hook using ParseVariableNum(), so there's
no reason to expect we'd need this again later.
Tom Lane [Fri, 3 Feb 2017 00:49:15 +0000 (19:49 -0500)]
Avoid improbable null pointer dereference in pgpassfileWarning().
Coverity complained that we might pass a null pointer to strcmp()
if PQresultErrorField were to return NULL. That shouldn't be possible,
since the server is supposed to always provide some SQLSTATE or other
in an error message. But we usually defend against such hazards, and
it only takes a little more code to do so here.
There's no good reason to think this is a live bug, so no back-patch.
Tom Lane [Fri, 3 Feb 2017 00:11:27 +0000 (19:11 -0500)]
Fix placement of initPlans when forcibly materializing a subplan.
If we forcibly place a Material node atop a finished subplan, we need
to move any initPlans attached to the subplan up to the Material node,
in order to keep SS_finalize_plan() happy. I'd figured this out in
commit 7b67a0a49 for the case of materializing a cursor plan, but out of
an abundance of caution, I put the initPlan movement hack at the call
site for that case, rather than inside materialize_finished_plan().
That was the wrong thing, because it turns out to also be necessary for
the only other caller of materialize_finished_plan(), ie subselect.c.
We lacked any test cases that exposed the mistake, but bug#14524 from
Wei Congrui shows that it's possible to get an initPlan reference into
the top tlist in that case too, and then SS_finalize_plan() complains.
Hence, move the hack into materialize_finished_plan().
In HEAD, also relocate some recently-added tests in subselect.sql, which
I'd unthinkingly dropped into the middle of a sequence of related tests.
Tom Lane [Thu, 2 Feb 2017 21:38:13 +0000 (16:38 -0500)]
Fix mishandling of tSRFs at different nesting levels.
Given a targetlist like "srf(x), f(srf(x))", split_pathtarget_at_srfs()
decided that it needed two levels of ProjectSet nodes, failing to notice
that the two SRF calls are textually equal(). Because of that, setrefs.c
would convert the upper ProjectSet's tlist to "Var1, f(Var1)" (where Var1
represents a reference to the srf(x) output of the lower ProjectSet).
This triggered an assertion in nodeProjectSet.c complaining that it found
no SRFs to evaluate, as reported by Erik Rijkers.
What we want in such a case is to evaluate srf(x) only once and use a plain
Result node to compute "Var1, f(Var1)"; that gives results similar to what
previous versions produced, whereas allowing srf(x) to be evaluated again
in an upper ProjectSet would square the number of rows emitted.
Furthermore, even if the SRF calls aren't textually identical, we want them
to be evaluated in lockstep, because that's what happened in the old
implementation. But split_pathtarget_at_srfs() got this completely wrong,
using two levels of ProjectSet for a case like "srf(x), f(srf(y))".
Hence, rewrite split_pathtarget_at_srfs() from the ground up so that it
groups SRFs according to the depth of nesting of SRFs in their arguments.
This is pretty much how we envisioned that working originally, but I blew
it when it came to implementation.
In passing, optimize the case of target == input_target, which I noticed
is not only possible but quite common.
Robert Haas [Thu, 2 Feb 2017 19:40:05 +0000 (14:40 -0500)]
Increase upper bound for bgwriter_lru_maxpages.
There is no particularly good reason to limit this value to 1000,
so increase the limit to INT_MAX / 2, the same limit we use for
shared_buffers. It's not clear how much practical effect larger
settings will have, but there seems no harm in letting people try it.
Robert Haas [Thu, 2 Feb 2017 19:12:58 +0000 (14:12 -0500)]
pageinspect: Support hash indexes.
Patch by Jesper Pedersen and Ashutosh Sharma, with some error handling
improvements by me. Tests from Peter Eisentraut. Reviewed by Álvaro
Herrera, Michael Paquier, Jesper Pedersen, Jeff Janes, Peter
Eisentraut, Amit Kapila, Mithun Cy, and me.
Noah Misch [Thu, 2 Feb 2017 16:21:16 +0000 (11:21 -0500)]
Code review for avoidance of direct cross-module links.
Remove $(pkglibdir) from $(rpathdir), since commits d51924be886c2a05e691fa05b16cb6b30ab8370f and eda04886c1e048d695728206504ab4198462168e removed direct linkage to
objects stored there. Users are unlikely to notice the difference.
Accompany every $(python_libspec) with $(python_additional_libs); this
doesn't fix a demonstrated bug, but it might do so on rare Python
configurations. With these changes, AIX ceases to be a special case.
Andrew Dunstan [Wed, 1 Feb 2017 22:52:35 +0000 (17:52 -0500)]
Don't count background workers against a user's connection limit.
Doing so doesn't seem to be within the purpose of the per user
connection limits, and has particularly unfortunate effects in
conjunction with parallel queries.
Backpatch to 9.6 where parallel queries were introduced.
David Rowley, reviewed by Robert Haas and Albe Laurenz.
Tom Lane [Wed, 1 Feb 2017 22:18:36 +0000 (17:18 -0500)]
Fix CatalogTupleInsert/Update abstraction for case of shared indstate.
Add CatalogTupleInsertWithInfo and CatalogTupleUpdateWithInfo to let
callers use the CatalogTupleXXX abstraction layer even in cases where
we want to share the results of CatalogOpenIndexes across multiple
inserts/updates for efficiency. This finishes the job begun in commit 2f5c9d9c9, by allowing some remaining simple_heap_insert/update
calls to be replaced. The abstraction layer is now complete enough
that we don't have to export CatalogIndexInsert at all anymore.
Also, this fixes several places in which 2f5c9d9c9 introduced performance
regressions by using retail CatalogTupleInsert or CatalogTupleUpdate even
though the previous coding had been able to amortize CatalogOpenIndexes
work across multiple tuples.
A possible future improvement is to arrange for the indexing.c functions
to cache the CatalogIndexState somewhere, maybe in the relcache, in which
case we could get rid of CatalogTupleInsertWithInfo and
CatalogTupleUpdateWithInfo again. But that's a task for another day.
Tom Lane [Wed, 1 Feb 2017 21:13:30 +0000 (16:13 -0500)]
Provide CatalogTupleDelete() as a wrapper around simple_heap_delete().
This extends the work done in commit 2f5c9d9c9 to provide a more nearly
complete abstraction layer hiding the details of index updating for catalog
changes. That commit only invented abstractions for catalog inserts and
updates, leaving nearby code for catalog deletes still calling the
heap-level routines directly. That seems rather ugly from here, and it
does little to help if we ever want to shift to a storage system in which
indexing work is needed at delete time.
Hence, create a wrapper function CatalogTupleDelete(), and replace calls
of simple_heap_delete() on catalog tuples with it. There are now very
few direct calls of [simple_]heap_delete remaining in the tree.
Robert Haas [Wed, 1 Feb 2017 18:42:41 +0000 (13:42 -0500)]
Refactor other replication commands to use DestRemoteSimple.
Commit a84069d9350400c860d5e932b50dfd337aa407b0 added a new type of
DestReceiver to avoid duplicating the existing code for the SHOW
command, but it turns out we can leverage that new DestReceiver
type in a few more places, saving some code.
Michael Paquier, reviewed by Andres Freund and by me.
Tom Lane [Wed, 1 Feb 2017 16:25:19 +0000 (11:25 -0500)]
Make psql's \set display variables in alphabetical order.
"\set" with no arguments displays all defined variables, but it does so
in the order that they appear in variables.c's list, which previously
was mostly creation order. That makes the list ugly and hard to find
things in, and it exposes some psql implementation details to users.
(For instance, ordinary variables will move to the bottom of the list
if unset and set again, but variables that have hooks won't.)
Fix that by keeping the list in alphabetical order at all times, which
isn't much more complicated than breaking out of the insertion search
loops once we reach an entry that should be after the one to be inserted.
Tom Lane [Wed, 1 Feb 2017 16:02:40 +0000 (11:02 -0500)]
Improve psql's behavior for \set and \unset of its control variables.
This commit improves on the results of commit 511ae628f in two ways:
1. It restores the historical behavior that "\set FOO" is interpreted
as setting FOO to "on", if FOO is a boolean control variable. We
already found one test script that was expecting that behavior, and
the psql documentation certainly does nothing to discourage people
from assuming that would work, since it often says just "if FOO is set"
when describing the effects of a boolean variable. However, now this
case will result in actually setting FOO to "on", not an empty string.
2. It arranges for an "\unset" of a control variable to set the value
back to its default value, rather than becoming apparently undefined.
The control variables are also initialized that way at psql startup.
In combination, these things guarantee that a control variable always
has a displayable value that reflects what psql is actually doing.
That is a pretty substantial usability improvement.
The implementation involves adding a second type of variable hook function
that is able to replace a proposed new value (including NULL) with another
one. We could alternatively have complicated the API of the assign hook,
but this way seems better since many variables can share the same
substitution hook function.
Also document the actual behavior of these variables more fully,
including covering assorted behaviors that were there before but
never documented.
This patch also includes some minor cleanup that should have been in 511ae628f but was missed.
Patch by me, but it owes a lot to discussions with Daniel Vérité.
Replace isMD5() with a more future-proof way to check if pw is encrypted.
The rule is that if pg_authid.rolpassword begins with "md5" and has the
right length, it's an MD5 hash, otherwise it's a plaintext password. The
idiom has been to use isMD5() to check for that, but that gets awkward,
when we add new kinds of verifiers, like the verifiers for SCRAM
authentication in the pending SCRAM patch set. Replace isMD5() with a new
get_password_type() function, so that when new verifier types are added, we
don't need to remember to modify every place that currently calls isMD5(),
to also recognize the new kinds of verifiers.
Also, use the new plain_crypt_verify function in passwordcheck, so that it
doesn't need to know about MD5, or in the future, about other kinds of
hashes or password verifiers.
Don't create "holes" in BufFiles, in the new logtape code.
The "Simplify tape block format" commit ignored the rule that blocks
returned by ltsGetFreeBlock() must be written out in the same order, at
least in the first write pass. To fix, relax that requirement, by making
ltsWriteBlock() to detect if it's about to create a "hole" in the
underlying BufFile, and fill it with zeros instead.
Reported, analysed, and reviewed by Peter Geoghegan.
Alvaro Herrera [Tue, 31 Jan 2017 21:42:24 +0000 (18:42 -0300)]
Tweak catalog indexing abstraction for upcoming WARM
Split the existing CatalogUpdateIndexes into two different routines,
CatalogTupleInsert and CatalogTupleUpdate, which do both the heap
insert/update plus the index update. This removes over 300 lines of
boilerplate code all over src/backend/catalog/ and src/backend/commands.
The resulting code is much more pleasing to the eye.
Also, by encapsulating what happens in detail during an UPDATE, this
facilitates the upcoming WARM patch, which is going to add a few more
lines to the update case making the boilerplate even more boring.
The original CatalogUpdateIndexes is removed; there was only one use
left, and since it's just three lines, we can as well expand it in place
there. We could keep it, but WARM is going to break all the UPDATE
out-of-core callsites anyway, so there seems to be no benefit in doing
so.
Stephen Frost [Tue, 31 Jan 2017 21:24:11 +0000 (16:24 -0500)]
pg_dump: Fix handling of ALTER DEFAULT PRIVILEGES
In commit 23f34fa, we changed how ACLs were handled to use the new
pg_init_privs catalog and to dump out the ACL commands as REVOKE+GRANT
combinations instead of trying to REVOKE all rights always and then
GRANT back just the ones which were in place.
Unfortunately, the DEFAULT PRIVILEGES system didn't quite get the
correct treatment with this change and ended up (incorrectly) only
including positive GRANTs instead of both the REVOKEs and GRANTs
necessary to preserve the correct privileges.
There are only a couple cases where such REVOKEs are possible because,
generally speaking, there's few rights which exist on objects by
default to be revoked.
Examples of REVOKEs which weren't being correctly preserved are when
privileges are REVOKE'd from the creator/owner, like so:
ALTER DEFAULT PRIVILEGES
FOR ROLE myrole
REVOKE SELECT ON TABLES FROM myrole;
or when other default privileges are being revoked, such as EXECUTE
rights granted to public for functions:
ALTER DEFAULT PRIVILEGES
FOR ROLE myrole
REVOKE EXECUTE ON FUNCTIONS FROM PUBLIC;
Fix this by correctly working out what the correct REVOKE statements are
(if any) and dump them out, just as we do for everything else.
Noticed while developing additional regression tests for pg_dump, which
will be landing shortly.
Stephen Frost [Tue, 31 Jan 2017 17:42:16 +0000 (12:42 -0500)]
perltidy pg_dump TAP tests
The pg_dump TAP tests have gotten pretty far from what perltidy thinks
they should be, so fix that, and in passing use long-form argument names
with arguments passed via "=" in a similar vein to 58da833.
No functional changes here, just whitespace and changing runs from
"-f" to "--file=", and similar.
Stephen Frost [Tue, 31 Jan 2017 16:17:38 +0000 (11:17 -0500)]
test_pg_dump: perltidy cleanup
As pointed out by Alvaro, we actually use perltidy on the perl scripts
in the source tree, so go back to the results of a perltidy run for the
test_pg_dump TAP script.
To make it look slightly less tragic, I changed most of the independent
arguments into long-form single arguments (eg: -f file.sql changed to be
--file=file.sql) to avoid having them confusingly split across lines due
to perltidy.
Tom Lane [Mon, 30 Jan 2017 23:42:41 +0000 (18:42 -0500)]
Simplify some long-obsolete code in hba.c's next_token().
next_token() oddly set its buffer space consumption limit to one before
the last char position in the buffer, not the last as you'd expect.
The reason is there was once an ugly kluge to mark keywords by appending
a newline to them, potentially requiring one more byte. Commit e5e2fc842
removed that kluge, but failed to notice that the length limit could be
increased.
Also, remove some vestigial handling of newline characters in the buffer.
That was left over from when this function read the file directly using
getc(). Commit 7f49a67f9 changed it to read from a buffer, from which
tokenize_file had already removed the only possible occurrence of newline,
but did not simplify this function in consequence.
Also, ensure that we don't return with *lineptr set to someplace past the
terminating '\0'; that would be catastrophic if a caller were to ask for
another token from the same line. This is just latent since no callers
actually do call again after a "false" return; but considering that it was
actually costing us extra code to do it wrong, we might as well make it
bulletproof.
Tom Lane [Mon, 30 Jan 2017 23:00:26 +0000 (18:00 -0500)]
Invent pg_hba_file_rules view to show the content of pg_hba.conf.
This view is designed along the same lines as pg_file_settings, to wit
it shows what is currently in the file, not what the postmaster has
loaded as the active settings. That allows it to be used to pre-vet
edits before issuing SIGHUP. As with the earlier view, go out of our
way to allow errors in the file to be reflected in the view, to assist
that use-case.
(We might at some point invent a view to show the current active settings,
but this is not that patch; and it's not trivial to do.)
Haribabu Kommi, reviewed by Ashutosh Bapat, Michael Paquier, Simon Riggs,
and myself
Tom Lane [Mon, 30 Jan 2017 22:15:42 +0000 (17:15 -0500)]
Add a regression test script dedicated to exercising system views.
Quite a few of our built-in system views were not exercised anywhere
in the regression tests. This is perhaps not so exciting for the ones
that are simple projections/joins of system catalogs, but for the ones
that are wrappers for set-returning C functions, the omission translates
directly to lack of test coverage for those functions.
In many cases, the reason for the omission is that the view doesn't have
much to do with any specific SQL feature, so there's no natural place to
test it. To remedy that, invent a new script sysviews.sql that's dedicated
to testing SRF-based views. Move a couple of tests that did fit this
charter into the new script, and add simple "count(*)" based tests of
other views within the charter. That's enough to ensure we at least
exercise the main code path through the SRF, although it does little to
prove that the output is sane.
More could be done here, no doubt, and I hope someone will think about
how we can test these views more thoroughly. But this is a starting
point.
Tom Lane [Mon, 30 Jan 2017 21:37:15 +0000 (16:37 -0500)]
Make psql reject attempts to set special variables to invalid values.
Previously, if the user set a special variable such as ECHO to an
unrecognized value, psql would bleat but store the new value anyway, and
then fall back to a default setting for the behavior controlled by the
variable. This was agreed to be a not particularly good idea. With
this patch, invalid values result in an error message and no change in
state.
(But this applies only to variables that affect psql's behavior; purely
informational variables such as ENCODING can still be set to random
values.)
To do this, modify the API for psql's assign-hook functions so that they
can return an OK/not OK result, and give them the responsibility for
printing error messages when they reject a value. Adjust the APIs for
ParseVariableBool and ParseVariableNum to support the new behavior
conveniently.
In passing, document the variable VERSION, which had somehow escaped that.
And improve the quite-inadequate commenting in psql/variables.c.
Daniel Vérité, reviewed by Rahila Syed, some further tweaking by me
Tom Lane [Mon, 30 Jan 2017 16:40:22 +0000 (11:40 -0500)]
Update time zone data files to tzdata release 2016j.
DST law changes in northern Cyprus (new zone Asia/Famagusta), Russia (new
zone Europe/Saratov), Tonga, Antarctica/Casey. Historical corrections for
Asia/Aqtau, Asia/Atyrau, Asia/Gaza, Asia/Hebron, Italy, Malta. Replace
invented zone abbreviation "TOT" for Tonga with numeric UTC offset; but
as in the past, we'll keep accepting "TOT" for input.
Stephen Frost [Mon, 30 Jan 2017 04:05:07 +0000 (23:05 -0500)]
Handle ALTER EXTENSION ADD/DROP with pg_init_privs
In commit 6c268df, pg_init_privs was added to track the initial
privileges of catalog objects and extensions. Unfortunately, that
commit didn't include understanding of ALTER EXTENSION ADD/DROP, which
allows the objects associated with an extension to be changed after the
initial CREATE EXTENSION script has been run.
The result of this meant that ACLs for objects added through
ALTER EXTENSION ADD were not recorded into pg_init_privs and we would
end up including those ACLs in pg_dump when we shouldn't have.
This commit corrects that by making sure to have pg_init_privs updated
when ALTER EXTENSION ADD/DROP is run, recording the permissions as they
are at ALTER EXTENSION ADD time, and removing any if/when ALTER
EXTENSION DROP is called.
This issue was pointed out by Moshe Jacobson as commentary on bug #14456
(which was actually a bug about versions prior to 9.6 not handling
custom ACLs on extensions correctly, an issue now addressed with
pg_init_privs in 9.6).
Back-patch to 9.6 where pg_init_privs was introduced.
Stephen Frost [Mon, 30 Jan 2017 04:05:07 +0000 (23:05 -0500)]
test_pg_dump TAP test whitespace cleanup
The formatting of the perl hashes used in the TAP tests for test_pg_dump
was rather horribly inconsistent and made it more difficult than it
really should have been to add new tests or adjust what tests are for
what runs, etc.
Robert Haas [Fri, 27 Jan 2017 21:22:11 +0000 (16:22 -0500)]
Refactor bitmap heap scan estimation of heap pages fetched.
Currently, we only need this logic in order to cost a Bitmap Heap
Scan. But a pending patch for Parallel Bitmap Heap Scan also uses
it to help figure out how many workers to use for the scan, which
has to be determined prior to costing. So, move the logic to
a separate function to make that easier.
Dilip Kumar. The patch series of which this is a part has been
reviewed by Andres Freund, Amit Khendekar, Tushar Ahuja, Rafia
Sabih, Haribabu Kommi, and me; it is not clear from the email
discussion which of those people have looked specifically at this
part.
Tom Lane [Fri, 27 Jan 2017 18:43:00 +0000 (13:43 -0500)]
Restructure hba.c to replace 3 parallel lists with single list of structs.
tokenize_file() now returns a single list of TokenizedLine structs,
carrying the same information as before. We were otherwise going to grow a
fourth list to deal with error messages, and that was getting a bit silly.
Tom Lane [Fri, 27 Jan 2017 03:09:34 +0000 (22:09 -0500)]
Use castNode() in a bunch of statement-list-related code.
When I wrote commit ab1f0c822, I really missed the castNode() macro that
Peter E. had proposed shortly before. This back-fills the uses I would
have put it to. It's probably not all that significant, but there are
more assertions here than there were before, and conceivably they will
help catch any bugs associated with those representation changes.
I left behind a number of usages like "(Query *) copyObject(query_var)".
Those could have been converted as well, but Peter has proposed another
notational improvement that would handle copyObject cases automatically,
so I let that be for now.
Andres Freund [Fri, 27 Jan 2017 00:47:03 +0000 (16:47 -0800)]
Use the new castNode() macro in a number of places.
This is far from a pervasive conversion, but it's a good starting
point.
Author: Peter Eisentraut, with some minor changes by me Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/c5d387d9-3440-f5e0-f9d4-71d53b9fbe52@2ndquadrant.com
Andres Freund [Fri, 27 Jan 2017 00:47:03 +0000 (16:47 -0800)]
Add castNode(type, ptr) for safe casting between NodeTag based types.
The new function allows to cast from one NodeTag based type to
another, while asserting that the conversion is valid. This replaces
the common pattern of doing a cast and a Assert(IsA(ptr, type))
close-by.
As this seems likely to be used pervasively, we decided to backpatch
this change the addition of this macro. Otherwise backpatched fixes
are more likely not to work on back-branches.
On branches before 9.6, where we do not yet rely on inline functions
being available, the type assertion is only performed if PG_USE_INLINE
support is detected. The cast obviously is performed regardless.
For the benefit of verifying the macro compiles in the back-branches,
this commit contains a single use of the new macro. On master, a
somewhat larger conversion will be committed separately.
Author: Peter Eisentraut and Andres Freund Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/c5d387d9-3440-f5e0-f9d4-71d53b9fbe52@2ndquadrant.com
Backpatch: 9.2-
Alvaro Herrera [Thu, 26 Jan 2017 20:45:22 +0000 (17:45 -0300)]
Remove test for COMMENT ON DATABASE
Our current DDL only allows a database name to be specified in COMMENT
ON DATABASE, which Andrew Dunstan reports to make this test fail on the
buildfarm. Remove the line until we gain a DDL command that allows the
current database to be operated on without having the specify it by
name.
Simon Riggs [Thu, 26 Jan 2017 18:14:02 +0000 (18:14 +0000)]
Reset hot standby xmin on master after restart
Hot_standby_feedback could be reset by reload and worked correctly, but if
the server was restarted rather than reloaded the xmin was not reset.
Force reset always if hot_standby_feedback is enabled at startup.
Tom Lane [Thu, 26 Jan 2017 17:17:47 +0000 (12:17 -0500)]
Ensure that a tsquery like '!foo' matches empty tsvectors.
!foo means "the tsvector does not contain foo", and therefore it should
match an empty tsvector. ts_match_vq() overenthusiastically supposed
that an empty tsvector could never match any query, so it forcibly
returned FALSE, the wrong answer. Remove the premature optimization.
Our behavior on this point was inconsistent, because while seqscans and
GIST index searches both failed to match empty tsvectors, GIN index
searches would find them, since GIN scans don't rely on ts_match_vq().
That makes this certainly a bug, not a debatable definition disagreement,
so back-patch to all supported branches.
Report and diagnosis by Tom Dunstan (bug #14515); added test cases by me.
Tom Lane [Wed, 25 Jan 2017 18:28:38 +0000 (13:28 -0500)]
Introduce convenience macros to hide JsonbContainer header accesses better.
This improves readability a bit and may make future improvements easier.
In passing, make sure that the JB_ROOT_IS_XXX macros deliver boolean (0/1)
results; the previous coding was a bug hazard, though no actual bugs are
known.
Tom Lane [Wed, 25 Jan 2017 14:33:41 +0000 (09:33 -0500)]
Remove vestigial resolveUnknown arguments from transformSortClause etc.
There's really no situation where we don't want these unknown-to-text
conversions to happen. The alternative is failure anyway, and the one
caller that was passing "false" did so only because it expected the
case could not arise. Might as well simplify the code.
Tom Lane [Wed, 25 Jan 2017 14:27:09 +0000 (09:27 -0500)]
Make UNKNOWN into an actual pseudo-type.
Previously, type "unknown" was labeled as a base type in pg_type, which
perhaps had some sense to it because you were allowed to create tables with
unknown-type columns. But now that we don't allow that, it makes more
sense to label it a pseudo-type. This has the additional effects of
forbidding use of "unknown" as a domain base type, cast source or target
type, PL function argument or result type, or plpgsql local variable type;
all of which seem like good holes to plug.
Tom Lane [Wed, 25 Jan 2017 14:17:18 +0000 (09:17 -0500)]
Change unknown-type literals to type text in SELECT and RETURNING lists.
Previously, we left such literals alone if the query or subquery had
no properties forcing a type decision to be made (such as an ORDER BY or
DISTINCT clause using that output column). This meant that "unknown" could
be an exposed output column type, which has never been a great idea because
it could result in strange failures later on. For example, an outer query
that tried to do any operations on an unknown-type subquery output would
generally fail with some weird error like "failed to find conversion
function from unknown to text" or "could not determine which collation to
use for string comparison". Also, if the case occurred in a CREATE VIEW's
query then the view would have an unknown-type column, causing similar
failures in queries trying to use the view.
To fix, at the tail end of parse analysis of a query, forcibly convert any
remaining "unknown" literals in its SELECT or RETURNING list to type text.
However, provide a switch to suppress that, and use it in the cases of
SELECT inside a set operation or INSERT command. In those cases we already
had type resolution rules that make use of context information from outside
the subquery proper, and we don't want to change that behavior.
Also, change creation of an unknown-type column in a relation from a
warning to a hard error. The error should be unreachable now in CREATE
VIEW or CREATE MATVIEW, but it's still possible to explicitly say "unknown"
in CREATE TABLE or CREATE (composite) TYPE. We want to forbid that because
it's nothing but a foot-gun.
This change creates a pg_upgrade failure case: a matview that contains an
unknown-type column can't be pg_upgraded, because reparsing the matview's
defining query will now decide that the column is of type text, which
doesn't match the cstring-like storage that the old materialized column
would actually have. Add a checking pass to detect that. While at it,
we can detect tables or composite types that would fail, essentially
for free. Those would fail safely anyway later on, but we might as
well fail earlier.
This patch is by me, but it owes something to previous investigations
by Rahila Syed. Also thanks to Ashutosh Bapat and Michael Paquier for
review.
Tom Lane [Wed, 25 Jan 2017 13:31:31 +0000 (08:31 -0500)]
Improve speed of contrib/postgres_fdw regression tests.
Commit 7012b132d added some tests that consumed an excessive amount of
time, more than tripling the time needed for "make installcheck" for this
module. Add filter conditions to reduce the number of rows scanned,
bringing the runtime down to within hailing distance of what it was before.
Jeevan Chalke and Ashutosh Bapat, per a gripe from me
Robert Haas [Wed, 25 Jan 2017 02:53:38 +0000 (21:53 -0500)]
Be more aggressive in avoiding tuple conversion.
According to the comments in tupconvert.c, it's necessary to perform
tuple conversion when either table has OIDs, and this was previously
checked by ensuring that the tdtypeid value matched between the tables
in question. However, that's overly stringent: we have access to
tdhasoid and can test directly whether OIDs are present, which lets us
avoid conversion in cases where the type OIDs are different but the
tuple descriptors are entirely the same (and neither has OIDs). This
is useful to the partitioning code, which can thereby avoid converting
tuples when inserting into a partition whose columns appear in the
same order as the parent columns, the normal case. It's possible
for the tuple routing code to avoid some additional overhead in this
case as well, so do that, too.
It's not clear whether it would be OK to skip this when both tables
have OIDs: do callers count on this to build a new tuple (losing the
previous OID) in such instances? Until we figure it out, leave the
behavior in that case alone.
Tom Lane [Wed, 25 Jan 2017 00:02:13 +0000 (19:02 -0500)]
Use non-conflicting table names in new regression test case.
Commit 587cda35c added a test to updatable_views.sql that created
tables named the same as tables used by the concurrent inherit.sql
script. Unsurprisingly, this results in random failures.
Pick different names.
Peter Eisentraut [Tue, 24 Jan 2017 22:03:56 +0000 (17:03 -0500)]
pg_dump: Fix some schema issues when dumping sequences
In the new code for selecting sequence data from pg_sequence, set the
schema to pg_catalog instead of the sequences own schema, and refer to
the sequence by OID instead of name, which was missing a schema
qualification.
Tom Lane [Tue, 24 Jan 2017 22:06:21 +0000 (17:06 -0500)]
Allow password file name to be specified as a libpq connection parameter.
Formerly an alternate password file could only be selected via the
environment variable PGPASSFILE; now it can also be selected via a
new connection parameter "passfile", corresponding to the conventions
for most other connection parameters. There was some concern about
this creating a security weakness, but it was agreed that that argument
was pretty thin, and there are clear use-cases for handling password
files this way.
Julian Markwort, reviewed by Fabien Coelho, some adjustments by me
Robert Haas [Tue, 24 Jan 2017 21:59:18 +0000 (16:59 -0500)]
Add a SHOW command to the replication command language.
This is useful infrastructure for an upcoming proposed patch to
allow the WAL segment size to be changed at initdb time; tools like
pg_basebackup need the ability to interrogate the server setting.
But it also doesn't seem like a bad thing to have independently of
that; it may find other uses in the future.
Robert Haas and Beena Emerson. (The original patch here was by
Beena, but I rewrote it to such a degree that most of the code
being committed here is mine.)
Robert Haas [Tue, 24 Jan 2017 21:53:56 +0000 (16:53 -0500)]
Add a new DestReceiver for printing tuples without catalog access.
If you create a DestReciver of type DestRemote and try to use it from
a replication connection that is not bound to a specific daabase, or
any other hypothetical type of backend that is not bound to a specific
database, it will fail because it doesn't have a pg_proc catalog to
look up properties of the types being printed. In general, that's
an unavoidable problem, but we can hardwire the properties of a few
builtin types in order to support utility commands. This new
DestReceiver of type DestRemoteSimple does just that.
Robert Haas [Tue, 24 Jan 2017 20:46:50 +0000 (15:46 -0500)]
Fix things so that updatable views work with partitioned tables.
Previously, ExecInitModifyTable was missing handling for WITH CHECK
OPTION, and view_query_is_auto_updatable was missing handling for
RELKIND_PARTITIONED_TABLE.
Robert Haas [Tue, 24 Jan 2017 20:34:39 +0000 (15:34 -0500)]
Set ecxt_scantuple correctly for tuple routing.
In 2ac3ef7a01df859c62d0a02333b646d65eaec5ff, we changed things so that
it's possible for a different TupleTableSlot to be used for partitioned
tables at successively lower levels. If we do end up changing the slot
from the original, we must update ecxt_scantuple to point to the new one
for partition key of the tuple to be computed correctly.
Reported by Rajkumar Raghuwanshi. Patch by Amit Langote.
Robert Haas [Tue, 24 Jan 2017 15:20:02 +0000 (10:20 -0500)]
Reindent table partitioning code.
We've accumulated quite a bit of stuff with which pgindent is not
quite happy in this code; clean it up to provide a less-annoying base
for future pgindent runs.
Robert Haas [Tue, 24 Jan 2017 13:50:16 +0000 (08:50 -0500)]
Fix interaction of partitioned tables with BulkInsertState.
When copying into a partitioned table, the target heap may change from
one tuple to next. We must ask ReadBufferBI() to get a new buffer
every time such change occurs. To do that, use new function
ReleaseBulkInsertStatePin(). This fixes the bug that tuples ended up
being inserted into the wrong partition, which occurred exactly
because the wrong buffer was used.
Amit Langote, per a suggestion from Robert Haas. Some cosmetic
adjustments by me.
Reports by 高增琦 (Gao Zengqi), Venkata B Nagothi, and
Ragnar Ouchterlony.
Peter Eisentraut [Mon, 23 Jan 2017 19:00:58 +0000 (14:00 -0500)]
Fix default minimum value for descending sequences
For some reason that is lost in history, a descending sequence would
default its minimum value to -2^63+1 (-PG_INT64_MAX) instead of
-2^63 (PG_INT64_MIN), even though explicitly specifying a minimum value
of -2^63 would work. Fix this inconsistency by using the full range by
default.
Reported-by: Daniel Verite <daniel@manitou-mail.org> Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Peter Eisentraut [Mon, 23 Jan 2017 18:45:32 +0000 (13:45 -0500)]
Don't error when no system locales were found
initdb used to warn about that, but it was changed to an error in
pg_import_system_locales, but some build farm members failed because of
that. Change it back to a warning.
Alvaro Herrera [Mon, 23 Jan 2017 15:55:18 +0000 (12:55 -0300)]
Prefetch blocks during lazy vacuum's truncation scan
Vacuum truncation scan can be sped up on rotating media by prefetching
blocks in forward direction. That makes the blocks already present in
memory by the time they are needed, while also letting OS read-ahead
kick in.
The truncate scan has been measured to be five times faster than without
this patch (that was on a slow disk, but it shouldn't hurt on fast
disks.)
Author: Álvaro Herrera, loosely based on a submission by Claudio Freire
Discussion: https://postgr.es/m/CAGTBQpa6NFGO_6g_y_7zQx8L9GcHDSQKYdo1tGuh791z6PYgEg@mail.gmail.com
Tom Lane [Mon, 23 Jan 2017 14:38:36 +0000 (09:38 -0500)]
Fix example plan in optimizer/README.
Joining three tables only takes two join nodes. I think when I (tgl)
wrote this, I was envisioning possible additional joins; but since the
example doesn't show any fourth table, it's just confusing to write
a third join node.
Tom Lane [Mon, 23 Jan 2017 14:15:49 +0000 (09:15 -0500)]
Volatile-ize some plperl variables that must survive into PG_CATCH blocks.
This appears to be necessary to fix a failure seen on buildfarm member
sittella. It shouldn't be necessary according to the letter of the C
standard, because we don't change the values of these variables within
the PG_TRY blocks; but somehow gcc 4.7.2 is dropping the ball.
Peter Eisentraut [Mon, 23 Jan 2017 13:28:39 +0000 (08:28 -0500)]
pg_dump: Fix minor memory leak
Missing a destroyPQExpBuffer() in the early exit branch. The early
exits aren't really necessary. Most similar functions just proceed
running the rest of the code zero times and clean up at the end.
Tom Lane [Sun, 22 Jan 2017 19:08:26 +0000 (14:08 -0500)]
Relocate static function declarations to be after typedefs in jsonfuncs.c.
Project style is to put things in this order, for the good and sufficient
reason that you often need the typedefs in the function declarations.
There already was one function declaration that needed a typedef, which
was randomly placed away from all the other static function declarations
in consequence. And the submitted patch for better json_populate_record
functionality jumped through even more hoops in order to preserve this
bad idea.
This patch only moves lines from point A to point B, no other changes.
Tom Lane [Sun, 22 Jan 2017 16:47:38 +0000 (11:47 -0500)]
Remove no-longer-needed loop in ExecGather().
Coverity complained quite properly that commit ea15e1867 had introduced
unreachable code into ExecGather(); to wit, it was no longer possible to
iterate the final for-loop more or less than once. So remove the for().
In passing, clean up a couple of comments, and make better use of a local
variable.
projects / postgresql / log