Shawn O. Pearce [Thu, 21 Jun 2007 04:51:00 +0000 (00:51 -0400)]
Document git-gui, git-citool as mainporcelain manual pages
Jakub Narebski pointed out that the git-gui blame viewer is not a
widely known feature, but is incredibly useful. Part of the issue
is advertising. Up until now we haven't even referenced git-gui from
within the core Git manual pages, mostly because I just wasn't sure
how I wanted to supply git-gui documentation to end-users, or how
that documentation should integrate with the core Git documentation.
Based upon Jakub's comment that many users may not even know that
the gui is available in a stock Git distribution I'm offering up
two basic manual pages: git-citool and git-gui. These should offer
enough of a starting point for users to identify that the gui exists,
and how to start it. Future releases of git-gui may contain their
own documentation system available from within a running git-gui.
But not today.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Dave O'Neill [Thu, 21 Jun 2007 21:48:56 +0000 (17:48 -0400)]
Generate tags with correct timestamp (git-svnimport)
Now uses git-tag instead of manually constructing the tag. This gives us a
correct timestamp, removes some crufty code, and makes it work the same as
git-cvsimport.
The generated tags are now lightweight tags instead of tag objects, which may
or may not be the behaviour we want.
Also, remove two unused variables from git-cvsimport.
Nanako Shiraishi [Sat, 16 Jun 2007 22:26:08 +0000 (15:26 -0700)]
Cloning from a repo without "current branch"
If the remote repository does not have a "current branch", git-clone
was confused and did not set up the resulting new repository
correctly. It did not reset HEAD from the default 'master', and did
not write the SHA1 to the master branch.
Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Sat, 16 Jun 2007 19:03:46 +0000 (21:03 +0200)]
Document git reflog --stale-fix
Document --stale-fix, used in "git reflog expire --stale-fix --all"
to remove invalid reflog entries, to fix situation after running
non reflog-aware git-prune from an older git in the presence of
reflogs (see RelNotes-1.5.0.txt).
Alex Riesen [Tue, 12 Jun 2007 20:52:10 +0000 (22:52 +0200)]
Do not use h_errno after connect(2): the function does not set it
Randal L. Schwartz noticed compilation problems on SunOS, which made
me look at the code again. The thing is, h_errno is not used by
connect(2), it is only for functions from netdb.h, like gethostbyname.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 16 Jun 2007 08:22:45 +0000 (01:22 -0700)]
Merge branch 'jc/remote'
* jc/remote:
git-push: Update description of refspecs and add examples
remote.c: "git-push frotz" should update what matches at the source.
remote.c: fix "git push" weak match disambiguation
remote.c: minor clean-up of match_explicit()
remote.c: refactor creation of new dst ref
remote.c: refactor match_explicit_refs()
Junio C Hamano [Sat, 16 Jun 2007 08:22:38 +0000 (01:22 -0700)]
Merge branch 'fl/cvsserver'
* fl/cvsserver:
cvsserver: Actually implement --export-all
cvsserver: Let --base-path and pserver get along just fine
cvsserver: Add some useful commandline options
Junio C Hamano [Sat, 16 Jun 2007 08:22:35 +0000 (01:22 -0700)]
Merge branch 'lh/submodule'
* lh/submodule:
gitmodules(5): remove leading period from synopsis
Add gitmodules(5)
git-submodule: give submodules proper names
Rename sections from "module" to "submodule" in .gitmodules
git-submodule: remember to checkout after clone
t7400: barf if git-submodule removes or replaces a file
Daniel Barkalow [Fri, 15 Jun 2007 14:22:37 +0000 (10:22 -0400)]
Fix pushing to a pattern with no dst
Refspecs with no colons are left with no dst value, because they are
interepreted differently for fetch and push. For push, they mean to
reuse the src side. Fix this for patterns.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 15 Jun 2007 05:20:16 +0000 (22:20 -0700)]
Documentation: adjust to AsciiDoc 8
It turns out that the attribute definition we have had for a
long time to hide "^" character from AsciiDoc 7 was not honored
by AsciiDoc 8 even under "-a asciidoc7compatible" mode. There is
a similar breakage with the "compatible" mode with + characters.
The double colon at the end of definition list term needs
to be attached to the term, without a whitespace. After this
minimum fixups, AsciiDoc 8 (I used 8.2.1 on Debian) with
compatibility mode seems to produce reasonably good results.
Junio C Hamano [Sat, 16 Jun 2007 06:33:06 +0000 (23:33 -0700)]
$EMAIL is a last resort fallback, as it's system-wide.
$EMAIL is a system-wide setup that is used for many many many
applications. If the git user chose a specific user.email setup,
then _this_ should be honoured rather than $EMAIL.
Alex Riesen [Wed, 13 Jun 2007 18:54:32 +0000 (20:54 +0200)]
Add a local implementation of hstrerror for the system which do not have it
The function converts the value of h_errno (last error of name
resolver library, see netdb.h).
One of systems which supposedly do not have the function is SunOS.
POSIX does not mandate its presence.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lars Hjemli [Wed, 13 Jun 2007 22:01:10 +0000 (00:01 +0200)]
gitmodules(5): remove leading period from synopsis
Asciidoc treats a line starting with a period followed by a title as a
blocktitle element. My introduction of gitmodules(5) unfortunatly broke
the documentation build process due to this processing, since it made
asciidoc generate an illegal (empty) synopsis element. Removing the leading
period fixes the problem and also makes gitmodules(5) use the same synopsis
notation as gitattributes(5).
Noticed-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also enforce that --export-all is only ever used together with an
explicit whitelist. Otherwise people might export every git repository
on the whole system without realising.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
cvsserver: Let --base-path and pserver get along just fine
Embarassing bug number one in my options patch.
Since the code for --base-path support rewrote
the cvsroot value after comparing it with a possible
existing value (i.e. from pserver authentication)
the check always failed.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 13 Jun 2007 09:37:04 +0000 (02:37 -0700)]
git-svn: test for creating new directories over svn://
As reported by Matthieu Moy, this is causing svnserve to
terminate connections, because it segfaults.
This test is disabled by default and can be enabled by setting
SVNSERVE_PORT to an unbound (for 127.0.0.1) TCP port in the
environment (in addition to SVN_TESTS=1). I'm not comfortable
with having a test start a daemon by default and take up a port
that could potentially stay running if the test failed.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 13 Jun 2007 09:37:03 +0000 (02:37 -0700)]
git-svn: cleanup: factor out longest_common_path() function
I hadn't looked at this code in a while and had to read this
again to figure out what it did. To avoid having to do this
again in the future, I just gave gave the hunk a descriptive
name.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The async reading from the pipe was skipping some of the
input lines. Fix the same by making sure that we add the
partial content of the previous read to the newly read
data.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 11 Jun 2007 13:39:44 +0000 (09:39 -0400)]
refactor dir_add_name
This is in preparation for keeping two entry lists in the
dir object.
This patch adds and uses the ALLOC_GROW() macro, which
implements the commonly used idiom of growing a dynamic
array using the alloc_nr function (not just in dir.c, but
everywhere).
We also move creation of a dir_entry to dir_entry_new.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Sat, 9 Jun 2007 20:34:16 +0000 (22:34 +0200)]
git-remote show: Also shorten non-fast-forward refs in the 'push' listing
'git-remote show remote-name' lists the refs that are pushed to the remote
by showing the 'Push' line from the config file. But before showing it,
it shortened 'refs/heads/here:refs/heads/there' to 'here:there'. However,
if the Push line is prefixed with a plus, the ref was not shortened.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
gitweb: change filename/directory name of snapshots
/.git or .git is removed from the project name and the
basename of the remaining path is used as the beginning of
the filename and as the directory in the archive.
The regexp will actually not strip off /.git or .git if there
wouldn't be anything left after removing it.
Currently the full project name is used as directory in the
archive and the basename is used as filename. For example a
repository named foo/bar/.git will have a archive named
.git-<version>.* and extract to foo/bar/.git. With this patch
the file is named bar-<version>.* and extracts to bar.
Signed-off-by: Matthias Lederhofer <matled@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 13 Jun 2007 04:04:52 +0000 (21:04 -0700)]
Merge branch 'aw/cvs'
* aw/cvs:
cvsimport: add <remote>/HEAD reference in separate remotes more
cvsimport: update documentation to include separate remotes option
cvsimport: add support for new style remote layout
Lars Hjemli [Mon, 11 Jun 2007 19:12:24 +0000 (21:12 +0200)]
git-submodule: give submodules proper names
This changes the way git-submodule uses .gitmodules: Subsections no longer
specify the submodule path, they now specify the submodule name. The
submodule path is found under the new key "submodule.<name>.path", which is
a required key.
With this change a submodule can be moved between different 'checkout paths'
without upsetting git-submodule.
Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lars Hjemli [Mon, 11 Jun 2007 19:12:23 +0000 (21:12 +0200)]
Rename sections from "module" to "submodule" in .gitmodules
Rename [module] to [submodule], so that it would be more
forward compatible with the proposed extension by harmonizing
the section names used in .gitmodules and .git/config.
Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lars Hjemli [Mon, 11 Jun 2007 19:12:22 +0000 (21:12 +0200)]
git-submodule: remember to checkout after clone
After the initial clone of a submodule, no files would be checked out in
the submodule directory if the submodule HEAD was equal to the SHA-1
specified in the index of the containing repository. This fixes the problem
by simply ignoring submodule HEAD for a fresh clone.
Signed-off-by: Lars Hjemli <hjemli@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach diff to imply --find-copies-harder upon -C -C
Earlier, a second "-C" on the command line had no effect.
But "--find-copies-harder" is so long to type, let's make doubled -C
enable that option. It is in line with how "git blame" handles such
doubled options to mean "work harder".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Johannes Sixt [Mon, 11 Jun 2007 08:02:17 +0000 (10:02 +0200)]
Avoid double-slash in path names that depend on $(sharedir).
Recent git-gui has the ability to determine the location of its library
files relative to the --exec-dir. Its Makefile enables this capability
depending on the install paths that are specified. However, without this
fix there is an extra slash in a path specification, so that the Makefile
does not recognize the equivalence of two paths that it compares.
A side-effect is that all "standard" builds (which do not set $(sharedir)
explicitly) now exploit above mentioned gut-gui feature.
Another side-effect is that an ugly compiled-in double-slash in
$(template_dir) is avoided.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 12 Jun 2007 07:14:47 +0000 (00:14 -0700)]
Merge branch 'master' of git://repo.or.cz/git-gui
* 'master' of git://repo.or.cz/git-gui:
git-gui: Save geometry before the window layout is damaged
git-gui: Give amend precedence to HEAD over MERGE_MSG
git-gui: Include 'war on whitespace' fixes from git.git
Unquote From line from patch before comparing with given from address.
This makes --suppress-from actually work when you're unfortunate enough
to have non-ASCII in your name. Also, if there's a match use the optionally
RFC2047 quoted version from the email.
Signed-off-by: Kristian Høgsberg <krh@redhat.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 12 Jun 2007 07:05:24 +0000 (00:05 -0700)]
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui:
git-gui: Save geometry before the window layout is damaged
git-gui: Give amend precedence to HEAD over MERGE_MSG
git-gui: Include 'war on whitespace' fixes from git.git
Shawn O. Pearce [Tue, 12 Jun 2007 03:52:43 +0000 (23:52 -0400)]
git-gui: Save geometry before the window layout is damaged
Because Tk does not assure us the order that it will process
children in before it destroys the main toplevel we cannot safely
save our geometry data during a "bind . <Destroy>" event binding.
The geometry may have already changed as a result of a one or
more children being removed from the layout. This was pointed
out in gitk by Mark Levedahl, and patched over there by commit b6047c5a8166a71e01c6b63ebbb67c6894d95114.
So we now also use "wm protocol . WM_DELETE_WINDOW" to detect when
the window is closed by the user, and forward that close event to
our main do_quit routine.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 11 Jun 2007 23:39:55 +0000 (19:39 -0400)]
git-gui: Give amend precedence to HEAD over MERGE_MSG
Apparently git-commit.sh (the command line commit user interface in
core Git) always gives precedence to the prior commit's message if
`commit --amend` is used and a $GIT_DIR/MERGE_MSG file also exists.
We actually were doing the same here in git-gui, but the amended
message got lost if $GIT_DIR/MERGE_MSG already existed because
we started a rescan immediately after loading the prior commit's
body into the edit buffer. When that happened the rescan found
MERGE_MSG existed and replaced the commit message buffer with the
contents of that file. This meant the user never saw us pick up
the commit message of the prior commit we are about to replace.
Johannes Sixt <J.Sixt@eudaptics.com> found this bug in git-gui by
running `git cherry-pick -n $someid` and then trying to amend the
prior commit in git-gui, thus combining the contents of $someid
with the contents of HEAD, and reusing the commit message of HEAD,
not $someid. With the recent changes to make cherry-pick use the
$GIT_DIR/MERGE_MSG file Johannes saw git-gui pick up the message
of $someid, not HEAD. Now we always use HEAD if we are amending.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Shawn O. Pearce [Mon, 11 Jun 2007 23:06:10 +0000 (19:06 -0400)]
git-gui: Include 'war on whitespace' fixes from git.git
Earlier git.git applied a large "war on whitespace" patch that was
created using 'apply --whitespace=strip'. Unfortunately a few of
git-gui's own files got caught in the mix and were also cleaned up.
That was a6080a0a44d5ead84db3dabbbc80e82df838533d.
This patch is needed in git-gui.git to reapply those exact same
changes here, otherwise our version generator script is unable to
obtain our version number from git-describe when we are hosted in
the git.git repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Junio C Hamano [Mon, 11 Jun 2007 07:52:43 +0000 (00:52 -0700)]
Merge branch 'master' of git://repo.or.cz/git-gui
* 'master' of git://repo.or.cz/git-gui:
git-gui: Internalize symbolic-ref HEAD reading logic
git-gui: Expose the merge.diffstat configuration option
git-gui: Allow users to delete remote branches
git-gui: Allow users to rename branches through 'branch -m'
git-gui: Disable tearoff menus on Windows, Mac OS X
git-gui: Provide fatal error if library is unavailable
git-gui: Enable verbose Tcl loading earlier
git-gui: Show the git-gui library path in 'About git-gui'
git-gui: GUI support for running 'git remote prune <name>'
git gui 0.8.0
Junio C Hamano [Mon, 11 Jun 2007 07:52:37 +0000 (00:52 -0700)]
Merge branch 'maint'
* maint: (46 commits)
git-gui: Changed blame header bar background to match main window
git-gui: Favor the original annotations over the recent ones
git-gui: Improve our labeling of blame annotation types
git-gui: Use three colors for the blame viewer background
git-gui: Jump to original line in blame viewer
git-gui: Display both commits in our tooltips
git-gui: Run blame twice on the same file and display both outputs
git-gui: Display the "Loading annotation..." message in italic
git-gui: Rename fields in blame viewer to better descriptions
git-gui: Label the uncommitted blame history entry
git-gui: Switch internal blame structure to Tcl lists
git-gui: Cleanup redundant column management in blame viewer
git-gui: Better document our blame variables
git-gui: Remove unused commit_list from blame viewer
git-gui: Automatically expand the line number column as needed
git-gui: Make the line number column slightly wider in blame
git-gui: Use lighter colors in blame view
git-gui: Remove unnecessary space between columns in blame viewer
git-gui: Remove the loaded column from the blame viewer
git-gui: Clip the commit summaries in the blame history menu
...
Junio C Hamano [Mon, 11 Jun 2007 07:51:39 +0000 (00:51 -0700)]
Merge branch 'maint' of git://repo.or.cz/git-gui into maint
* 'maint' of git://repo.or.cz/git-gui: (46 commits)
git-gui: Changed blame header bar background to match main window
git-gui: Favor the original annotations over the recent ones
git-gui: Improve our labeling of blame annotation types
git-gui: Use three colors for the blame viewer background
git-gui: Jump to original line in blame viewer
git-gui: Display both commits in our tooltips
git-gui: Run blame twice on the same file and display both outputs
git-gui: Display the "Loading annotation..." message in italic
git-gui: Rename fields in blame viewer to better descriptions
git-gui: Label the uncommitted blame history entry
git-gui: Switch internal blame structure to Tcl lists
git-gui: Cleanup redundant column management in blame viewer
git-gui: Better document our blame variables
git-gui: Remove unused commit_list from blame viewer
git-gui: Automatically expand the line number column as needed
git-gui: Make the line number column slightly wider in blame
git-gui: Use lighter colors in blame view
git-gui: Remove unnecessary space between columns in blame viewer
git-gui: Remove the loaded column from the blame viewer
git-gui: Clip the commit summaries in the blame history menu
...
Shawn O. Pearce [Mon, 11 Jun 2007 06:14:21 +0000 (02:14 -0400)]
Merge branch 'maint'
* maint: (38 commits)
git-gui: Changed blame header bar background to match main window
git-gui: Favor the original annotations over the recent ones
git-gui: Improve our labeling of blame annotation types
git-gui: Use three colors for the blame viewer background
git-gui: Jump to original line in blame viewer
git-gui: Display both commits in our tooltips
git-gui: Run blame twice on the same file and display both outputs
git-gui: Display the "Loading annotation..." message in italic
git-gui: Rename fields in blame viewer to better descriptions
git-gui: Label the uncommitted blame history entry
git-gui: Switch internal blame structure to Tcl lists
git-gui: Cleanup redundant column management in blame viewer
git-gui: Better document our blame variables
git-gui: Remove unused commit_list from blame viewer
git-gui: Automatically expand the line number column as needed
git-gui: Make the line number column slightly wider in blame
git-gui: Use lighter colors in blame view
git-gui: Remove unnecessary space between columns in blame viewer
git-gui: Remove the loaded column from the blame viewer
git-gui: Clip the commit summaries in the blame history menu
...
Jakub Narebski [Fri, 8 Jun 2007 11:33:28 +0000 (13:33 +0200)]
gitweb: '--cc' for merges in 'commitdiff' view
Allow choosing between '-c' (combined diff) and '--cc' (compact
combined) diff format in 'commitdiff' view for merge (multiparent)
commits. Default is now '--cc'.
In the bottom part of navigation bar there is link allowing to change
diff format: "combined" for '-c' (when using '--cc') and "compact" for
'--cc' (when using '-c'), just on the right of "raw" link to
'commitdiff_plain" view.
About patchset part of diff --cc output: the difftree (whatchanged
table) has "patch" links to anchors to individual patches (on the same
page). The --cc option further compresses the patch output by
omitting some hunks; when this optimization makes all hunks disappear,
the patch is not shown (like in any other "empty diff" case). But the
fact that patch has been simplified out is not reflected in the raw
(difftree) part of diff output; the raw part is the same for '-c' and
'--cc' options. As correcting difftree is rather out of the question,
as it would require scanning patchset part before writing out
difftree, we add "Simple merge" empty diffs as a place to have anchor
to in place of those simplified out and removed patches.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Fri, 8 Jun 2007 11:32:44 +0000 (13:32 +0200)]
gitweb: Add links to blobdiffs in from-file/to-file header for merges
Add links to diff to file ('blobdiff' view) for each of individual
versions of the file in a merge commit to the from-file/to-file header
in the patch part of combined 'commitdiff' view for merges.
The from-file/to-file header for combined diff now looks like:
where _<filename>_ link is link to appropriate version of a file
('blob' view), and _<n>_ is link to respective diff to mentioned
version of a file ('blobdiff' view). There is even hint provided in
the form of title attribute.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Fri, 8 Jun 2007 11:27:42 +0000 (13:27 +0200)]
gitweb: Split git_patchset_body into separate subroutines
This commit makes git_patchset_body easier to read, and reduces level of
nesting and indent level. It adds more lines that it removes because of
extra parameter passing in subroutines, and subroutine calls in
git_patchset_body. Also because there are few added comments.
Below there are descriptions of all split-off subroutines:
Separate formatting "git diff" header into format_git_diff_header_line.
While at it fix it so it always escapes pathname. It would be even more
useful if we decide to use `--cc' for merges, and need to generate by
hand empty patches for anchors.
Separate formatting extended (git) diff header lines into
format_extended_diff_header_line. This one is copied without changes.
Separate formatting two-lines from-file/to-file diff header into
format_diff_from_to_header subroutine. While at it fix it so it always
escapes pathname. Beware calling convention: it takes _two_ lines.
Separate generating %from and %to hashes (with info used among others to
generate hyperlinks) into parse_from_to_diffinfo subroutine. This one is
copied without changes.
Separate checking if file was deleted (and among others therefore does
not have link to the result file) into is_deleted subroutine. This would
allow us to easily change the algotithm to find if file is_deleted in
the result.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Fri, 8 Jun 2007 11:26:31 +0000 (13:26 +0200)]
gitweb: Improve "next" link in commitdiff view
Check if 'hp' (hash_parent) parameter to 'commitdiff' view is one of
'h' (hash) commit parents, i.e. if commitdiff is of the form
"<commit>^<n> <commit>", and mark it as such in the bottom part of
navigation bar. The "next" link in commitdiff view was introduced
in commit 151602df00b8e5c5b4a8193f59a94b85f9b5aebc
If 'hb' is n-th parent of 'h', show the following at the bottom
of navigation bar:
(from parent n: _commit_)
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jakub Narebski [Fri, 8 Jun 2007 11:24:56 +0000 (13:24 +0200)]
gitweb: Provide links to commitdiff to each parent in 'commitdiff' view
Since commit-fb1dde4a we show combined diff for merges in 'commitdiff'
view, and since commit-208ecb2e also in 'commit' view. Sometimes
though one would want to see diff to one of merge commit parents. It
is easy in 'commit' view: in the commit header part there are "diff"
links for each of parent header. This commit adds such links also for
'commitdiff' view.
Add to difftree / whatchanged table row with "1", "2", ... links to
'commitdiff' view for diff with n-th parent for merge commits, as a
table header. This is visible only in 'comitdiff' view, and only for
a merge commit (comit with more than one parent).
To save space links are shown as "n", where "n" is number of a parent,
and not as for example shortened (to 7 characters) sha1 of a parent
commit. To make it easier to discover what links is for, each link
has 'title' attribute explaining the link.
Note that one would need to remember that difftree table in 'commit'
view has one less column (it doesn't have "patch" link column), if one
would want to add such table header also in 'commit' view.
Example output:
1 2 3
Makefile patch | diff1 | diff2 | diff3 | blob | history
cache.h patch | diff1 | diff2 | diff3 | blob | history
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 10 Jun 2007 23:45:08 +0000 (16:45 -0700)]
Merge branch 'maint'
* maint:
tutorial: use "project history" instead of "changelog" in header
Documentation: user-manual todo
user-manual: add a missing section ID
Fix typo in remote branch example in git user manual
user-manual: quick-start updates
Gerrit Pape [Tue, 5 Jun 2007 08:47:51 +0000 (08:47 +0000)]
Fix typo in remote branch example in git user manual
In Documentation/user-manual.txt the example
$ git checkout --track -b origin/maint maint
under "Getting updates with git pull", should read
$ git checkout --track -b maint origin/maint
This was noticed by Ron, and reported through
http://bugs.debian.org/427502
Signed-off-by: Gerrit Pape <pape@smarden.org> Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Theodore Ts'o [Sun, 10 Jun 2007 15:17:30 +0000 (11:17 -0400)]
git-mergetool: Make default selection of merge-tool more intelligent
Make git-mergetool prefer meld under GNOME, and kdiff3 under KDE. When
considering emerge and vimdiff, check $VISUAL and $EDITOR to see which the
user might prefer.
Junio C Hamano [Sun, 10 Jun 2007 01:14:56 +0000 (18:14 -0700)]
git-blame -w: ignore whitespace
When refactoring code to split one iteration of a too deeply
nested loop into a separate function, it inevitably makes the
indentation levels shallower (that's the sole point of such a
refactoring). With "git blame -w", you can ignore such
re-indentation and pass blame for such moved lines to the
parent.
Junio C Hamano [Sat, 9 Jun 2007 08:37:14 +0000 (01:37 -0700)]
remote.c: "git-push frotz" should update what matches at the source.
Earlier, when the local repository has a branch "frotz" and the
remote repository has a tag "frotz" (but not branch "frotz"),
"git-push frotz" mistakenly updated the tag at the remote side.
This was because the partial refname matching code was applied
independently on both source and destination side.
With this fix, when a colon-less refspec is given to git-push,
we first match it with the refs in the source repository, and
update the matching ref in the destination repository.
Junio C Hamano [Sat, 9 Jun 2007 08:23:53 +0000 (01:23 -0700)]
remote.c: fix "git push" weak match disambiguation
When "git push A:B" is given, and A (or B) is not a full refname
that begins with refs/, we require an unambiguous match with an
existing ref. For this purpose, a match with a local branch or
a tag (i.e. refs/heads/A and refs/tags/A) is called a "strong
match", and any other match is called a "weak match". A partial
refname is unambiguous when there is only one strong match with
any number of weak matches, or when there is only one weak match
and no other match.
However, as reported by Sparse with Ramsay Jones recently,
count_refspec_match() function had a bug where a variable in an
inner block masked a different variable of the same name, which
caused the weak matches to be ignored.
Junio C Hamano [Sat, 9 Jun 2007 07:14:04 +0000 (00:14 -0700)]
remote.c: minor clean-up of match_explicit()
When checking what ref the source refspec matches, we have no
business setting the default for the destination, so move that
code lower. Also simplify the result from the code block that
matches the source side by making it set matched_src only upon
unambiguous match.
projects / git / log