Tom Lane [Thu, 10 Mar 2016 20:52:58 +0000 (15:52 -0500)]
Refactor pull_var_clause's API to make it less tedious to extend.
In commit 1d97c19a0f748e94 and later c1d9579dd8bf3c92, we extended
pull_var_clause's API by adding enum-type arguments. That's sort of a pain
to maintain, though, because it means every time we add a new behavior we
must touch every last one of the call sites, even if there's a reasonable
default behavior that most of them could use. Let's switch over to using a
bitmask of flags, instead; that seems more maintainable and might save a
nanosecond or two as well. This commit changes no behavior in itself,
though I'm going to follow it up with one that does add a new behavior.
In passing, remove flatten_tlist(), which has not been used since 9.1
and would otherwise need the same API changes.
Removing these enums means that optimizer/tlist.h no longer needs to
depend on optimizer/var.h. Changing that caused a number of C files to
need addition of #include "optimizer/var.h" (probably we can thank old
runs of pgrminclude for that); but on balance it seems like a good change
anyway.
Robert Haas [Thu, 10 Mar 2016 17:44:09 +0000 (12:44 -0500)]
Provide much better wait information in pg_stat_activity.
When a process is waiting for a heavyweight lock, we will now indicate
the type of heavyweight lock for which it is waiting. Also, you can
now see when a process is waiting for a lightweight lock - in which
case we will indicate the individual lock name or the tranche, as
appropriate - or for a buffer pin.
Amit Kapila, Ildus Kurbangaliev, reviewed by me. Lots of helpful
discussion and suggestions by many others, including Alexander
Korotkov, Vladimir Borodin, and many others.
Alvaro Herrera [Thu, 10 Mar 2016 16:15:08 +0000 (13:15 -0300)]
Document BRIN a bit more thoroughly
The chapter "Interfacing Extensions To Indexes" and CREATE OPERATOR
CLASS reference page were missed when BRIN was added. We document
all our other index access methods there, so make sure BRIN complies.
Author: Álvaro Herrera Reported-By: Julien Rouhaud, Tom Lane Reviewed-By: Emre Hasegeli
Discussion: https://www.postgresql.org/message-id/56CF604E.9000303%40dalibo.com
Backpatch: 9.5, where BRIN was introduced
Magnus Hagander [Thu, 10 Mar 2016 12:48:58 +0000 (13:48 +0100)]
Avoid crash on old Windows with AVX2-capable CPU for VS2013 builds
The Visual Studio 2013 CRT generates invalid code when it makes a 64-bit
build that is later used on a CPU that supports AVX2 instructions using a
version of Windows before 7SP1/2008R2SP1.
Detect this combination, and in those cases turn off the generation of
FMA3, per recommendation from the Visual Studio team.
The bug is actually in the CRT shipping with Visual Studio 2013, but
Microsoft have stated they're only fixing it in newer major versions.
The fix is therefor conditioned specifically on being built with this
version of Visual Studio, and not previous or later versions.
Tom Lane [Thu, 10 Mar 2016 04:29:05 +0000 (23:29 -0500)]
Remove a couple of useless pstrdup() calls.
There's no point in pstrdup'ing the result of TextDatumGetCString,
since that's necessarily already a freshly-palloc'd C string.
These particular calls are unlikely to be of any consequence
performance-wise, but still they're a bad precedent that can confuse
future patch authors.
Andres Freund [Thu, 10 Mar 2016 02:53:53 +0000 (18:53 -0800)]
Avoid unlikely data-loss scenarios due to rename() without fsync.
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes. Use the previously added durable_rename()/durable_link_or_rename()
in various places where we previously just renamed files.
Most of the changed call sites are arguably not critical, but it seems
better to err on the side of too much durability. The most prominent
known case where the previously missing fsyncs could cause data loss is
crashes at the end of a checkpoint. After the actual checkpoint has been
performed, old WAL files are recycled. When they're filled, their
contents are fdatasynced, but we did not fsync the containing
directory. An OS/hardware crash in an unfortunate moment could then end
up leaving that file with its old name, but new content; WAL replay
would thus not replay it.
Reported-By: Tomas Vondra
Author: Michael Paquier, Tomas Vondra, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
Andres Freund [Thu, 10 Mar 2016 02:53:53 +0000 (18:53 -0800)]
Introduce durable_rename() and durable_link_or_rename().
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes; especially on filesystems like xfs and ext4 when mounted
with data=writeback. To be certain that a rename() atomically replaces
the previous file contents in the face of crashes and different
filesystems, one has to fsync the old filename, rename the file, fsync
the new filename, fsync the containing directory. This sequence is not
generally adhered to currently; which exposes us to data loss risks. To
avoid having to repeat this arduous sequence, introduce
durable_rename(), which wraps all that.
Also add durable_link_or_rename(). Several places use link() (with a
fallback to rename()) to rename a file, trying to avoid replacing the
target file out of paranoia. Some of those rename sequences need to be
durable as well. There seems little reason extend several copies of the
same logic, so centralize the link() callers.
This commit does not yet make use of the new functions; they're used in
a followup commit.
Author: Michael Paquier, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
Peter Eisentraut [Mon, 29 Feb 2016 23:48:34 +0000 (18:48 -0500)]
doc: Reorganize pg_resetxlog reference page
The pg_resetxlog reference page didn't have a proper options list, only
running text listing the options and some explanations of them. This
might have worked when there were only a few options, but the list has
grown over the releases, and now it's hard to find an option and its
associated explanation. So write out the options list as on other
reference pages.
Alvaro Herrera [Wed, 9 Mar 2016 22:54:03 +0000 (19:54 -0300)]
PostgresNode: add backup_fs_hot and backup_fs_cold
These simple methods rely on RecursiveCopy to create a filesystem-level
backup of a server. They aren't currently used anywhere yet,but will be
useful for future tests.
Author: Craig Ringer Reviewed-By: Michael Paquier, Salvador Fandino, Álvaro Herrera
Commitfest-URL: https://commitfest.postgresql.org/9/569/
Alvaro Herrera [Wed, 9 Mar 2016 21:00:31 +0000 (18:00 -0300)]
Add filter capability to RecursiveCopy::copypath
This allows skipping copying certain files and subdirectories in tests.
This is useful in some circumstances such as copying a data directory;
future tests want this feature.
Tom Lane [Wed, 9 Mar 2016 19:51:01 +0000 (14:51 -0500)]
Fix incorrect handling of NULL index entries in indexed ROW() comparisons.
An index search using a row comparison such as ROW(a, b) > ROW('x', 'y')
would stop upon reaching a NULL entry in the "b" column, ignoring the
fact that there might be non-NULL "b" values associated with later values
of "a". This happens because _bt_mark_scankey_required() marks the
subsidiary scankey for "b" as required, which is just wrong: it's for
a column after the one with the first inequality key (namely "a"), and
thus can't be considered a required match.
This bit of brain fade dates back to the very beginnings of our support
for indexed ROW() comparisons, in 2006. Kind of astonishing that no one
came across it before Glen Takahashi, in bug #14010.
Back-patch to all supported versions.
Note: the given test case doesn't actually fail in unpatched 9.1, evidently
because the fix for bug #6278 (i.e., stopping at nulls in either scan
direction) is required to make it fail. I'm sure I could devise a case
that fails in 9.1 as well, perhaps with something involving making a cursor
back up; but it doesn't seem worth the trouble.
Alvaro Herrera [Wed, 9 Mar 2016 17:31:07 +0000 (14:31 -0300)]
pgcrypto: support changing S2K iteration count
pgcrypto already supports key-stretching during symmetric encryption,
including the salted-and-iterated method; but the number of iterations
was not configurable. This commit implements a new s2k-count parameter
to pgp_sym_encrypt() which permits selecting a larger number of
iterations.
Robert Haas [Wed, 9 Mar 2016 17:08:58 +0000 (12:08 -0500)]
Add a generic command progress reporting facility.
Using this facility, any utility command can report the target relation
upon which it is operating, if there is one, and up to 10 64-bit
counters; the intent of this is that users should be able to figure out
what a utility command is doing without having to resort to ugly hacks
like attaching strace to a backend.
As a demonstration, this adds very crude reporting to lazy vacuum; we
just report the target relation and nothing else. A forthcoming patch
will make VACUUM report a bunch of additional data that will make this
much more interesting. But this gets the basic framework in place.
Vinayak Pokale, Rahila Syed, Amit Langote, Robert Haas, reviewed by
Kyotaro Horiguchi, Jim Nasby, Thom Brown, Masahiko Sawada, Fujii Masao,
and Masanori Oyama.
Tom Lane [Wed, 9 Mar 2016 15:56:36 +0000 (10:56 -0500)]
Fix incorrect tlist generation in create_gather_plan().
This function is written as though Gather doesn't project; but it does.
Even if it did not project, though, we must use build_path_tlist to ensure
that the output columns receive correct sortgroupref labeling.
Robert Haas [Wed, 9 Mar 2016 15:51:49 +0000 (10:51 -0500)]
postgres_fdw: Consider foreign joining and foreign sorting together.
Commit ccd8f97922944566d26c7d90eb67ab7848ee9905 gave us the ability to
request that the remote side sort the data, and, later, commit e4106b2528727c4b48639c0e12bf2f70a766b910 gave us the ability to
request that the remote side perform the join for us rather than doing
it locally. But we could not do both things at the same time: a
remote SQL query that had an ORDER BY clause would never be a join.
This commit adds that capability.
Tom Lane [Wed, 9 Mar 2016 06:12:16 +0000 (01:12 -0500)]
Improve handling of pathtargets in planner.c.
Refactor so that the internal APIs in planner.c deal in PathTargets not
targetlists, and establish a more regular structure for deriving the
targets needed for successive steps.
There is more that could be done here; calculating the eval costs of each
successive target independently is both inefficient and wrong in detail,
since we won't actually recompute values available from the input node's
tlist. But it's no worse than what happened before the pathification
rewrite. In any case this seems like a good starting point for considering
how to handle Konstantin Knizhnik's function-evaluation-postponement patch.
Andres Freund [Wed, 9 Mar 2016 01:34:09 +0000 (17:34 -0800)]
Add valgrind suppressions for python code.
Python's allocator does some low-level tricks for efficiency;
unfortunately they trigger valgrind errors. Those tricks can be disabled
making instrumentation easier; but few people testing postgres will have
such a build of python. So add broad suppressions of the resulting
errors.
See also https://svn.python.org/projects/python/trunk/Misc/README.valgrind
This possibly will suppress valid errors, but without it it's basically
impossible to use valgrind with plpython code.
Author: Andres Freund
Backpatch: 9.4, where we started to maintain valgrind suppressions
Tom Lane [Wed, 9 Mar 2016 03:32:03 +0000 (22:32 -0500)]
Improve handling of group-column indexes in GroupingSetsPath.
Instead of having planner.c compute a groupColIdx array and store it in
GroupingSetsPaths, make create_groupingsets_plan() find the grouping
columns by searching in the child plan node's tlist. Although that's
probably a bit slower for create_groupingsets_plan(), it's more like
the way every other plan node type does this, and it provides positive
confirmation that we know which child output columns we're supposed to be
grouping on. (Indeed, looking at this now, I'm not at all sure that it
wasn't broken before, because create_groupingsets_plan() isn't demanding
an exact tlist match from its child node.) Also, this allows substantial
simplification in planner.c, because it no longer needs to compute the
groupColIdx array at all; no other cases were using it.
I'd intended to put off this refactoring until later (like 9.7), but
in view of the likely bug fix and the need to rationalize planner.c's
tlist handling so we can do something sane with Konstantin Knizhnik's
function-evaluation-postponement patch, I think it can't wait.
Peter Eisentraut [Sat, 20 Feb 2016 04:07:46 +0000 (23:07 -0500)]
psql: Fix some strange code in SQL help creation
Struct QL_HELP used to be defined as static in the sql_help.h header
file, which is included in sql_help.c and help.c, thus creating two
separate instances of the struct. This causes a warning from GCC 6,
because the struct is not used in sql_help.c.
Instead, declare the struct as extern in the header file and define it
in sql_help.c. This also allows making a bunch of functions static
because they are no longer needed outside of sql_help.c.
Reviewed-by: Thomas Munro <thomas.munro@enterprisedb.com>
Andres Freund [Tue, 8 Mar 2016 22:59:29 +0000 (14:59 -0800)]
ltree: Zero padding bytes when allocating memory for externally visible data.
ltree/ltree_gist/ltxtquery's headers stores data at MAXALIGN alignment,
requiring some padding bytes. So far we left these uninitialized. Zero
those by using palloc0.
Author: Andres Freund Reported-By: Andres Freund / valgrind / buildarm animal skink
Backpatch: 9.1-
Tom Lane [Tue, 8 Mar 2016 21:50:32 +0000 (16:50 -0500)]
Fix minor thinko in pathification code.
I passed the wrong "root" struct to create_pathtarget in build_minmax_path.
Since the subroot is a clone of the outer root, this would not cause any
serious problems, but it would waste some cycles because
set_pathtarget_cost_width would not have access to Var width estimates
set up while running query_planner on the subroot.
Andres Freund [Tue, 8 Mar 2016 21:33:24 +0000 (13:33 -0800)]
plperl: Correctly handle empty arrays in plperl_ref_from_pg_array.
plperl_ref_from_pg_array() didn't consider the case that postgrs arrays
can have 0 dimensions (when they're empty) and accessed the first
dimension without a check. Fix that by special casing the empty array
case.
Author: Alex Hunsaker Reported-By: Andres Freund / valgrind / buildfarm animal skink
Discussion: 20160308063240.usnzg6bsbjrne667@alap3.anarazel.de
Backpatch: 9.1-
Tom Lane [Tue, 8 Mar 2016 21:28:27 +0000 (16:28 -0500)]
Finish refactoring make_foo() functions in createplan.c.
This patch removes some redundant cost calculations that I left for later
cleanup in commit 3fc6e2d7f5b652b4. There's now a uniform policy that the
make_foo() convenience functions don't do any cost calculations. Most of
their callers copy costs from the source Path node, and for those that
don't, the calculation in the make_foo() function wasn't necessarily right
anyhow. (make_result() was particularly a mess, as it was serving multiple
callers using cost calcs designed for only the first one or two that had
ever existed.) Aside from saving a few cycles, this ensures that what
EXPLAIN prints matches the costs we used for planning purposes. It does
not change any planner decisions, since the decisions are already made.
Robert Haas [Tue, 8 Mar 2016 15:09:50 +0000 (10:09 -0500)]
Add some functions to fd.c for the convenience of extensions.
For example, if you want to perform an ioctl() on a file descriptor
opened through the fd.c routines, there's no way to do that without
being able to get at the underlying fd.
Robert Haas [Tue, 8 Mar 2016 13:46:48 +0000 (08:46 -0500)]
Department of second thoughts: remove PD_ALL_FROZEN.
Commit a892234f830e832110f63fc0a2afce2fb21d1584 added a second bit per
page to the visibility map, which still seems like a good idea, but it
also added a second page-level bit alongside PD_ALL_VISIBLE to track
whether the visibility map bit was set. That no longer seems like a
clever plan, because we don't really need that bit for anything. We
always clear both bits when the page is modified anyway.
Patch by me, reviewed by Kyotaro Horiguchi and Masahiko Sawada.
Robert Haas [Tue, 8 Mar 2016 13:38:50 +0000 (08:38 -0500)]
Add pg_visibility contrib module.
This lets you examine the visibility map as well as page-level
visibility information. I initially wrote it as a debugging aid,
but was encouraged to polish it for commit.
Robert Haas [Tue, 8 Mar 2016 13:13:02 +0000 (08:13 -0500)]
pg_upgrade: Remove converter plugin facility.
We've not found a use for this so far, and the current need, which
is to convert the visibility map to a new format, does not suit the
existing design anyway. So just rip it out.
Author: Masahiko Sawada, slightly revised by me.
Discussion: 20160215211313.GB31273@momjian.us
Joe Conway [Mon, 7 Mar 2016 23:14:20 +0000 (15:14 -0800)]
Make get_controlfile() error logging consistent with src/common
As originally committed, get_controlfile() used a non-standard approach
to error logging. Make it consistent with the majority of error logging
done in src/common.
Coverity and inspection for the issue addressed in fd45d16f found some
questionable code.
Specifically coverity noticed that the wrong length was added in
ReorderBufferSerializeChange() - without immediate negative consequences
as the variable isn't used afterwards. During code-review and testing I
noticed that a bit of space was wasted when allocating tuple bufs in
several places. Thirdly, the debug memset()s in
ReorderBufferGetTupleBuf() reduce the error checking valgrind can do.
Tom Lane [Mon, 7 Mar 2016 20:58:22 +0000 (15:58 -0500)]
Make the upper part of the planner work by generating and comparing Paths.
I've been saying we needed to do this for more than five years, and here it
finally is. This patch removes the ever-growing tangle of spaghetti logic
that grouping_planner() used to use to try to identify the best plan for
post-scan/join query steps. Now, there is (nearly) independent
consideration of each execution step, and entirely separate construction of
Paths to represent each of the possible ways to do that step. We choose
the best Path or set of Paths using the same add_path() logic that's been
used inside query_planner() for years.
In addition, this patch removes the old restriction that subquery_planner()
could return only a single Plan. It now returns a RelOptInfo containing a
set of Paths, just as query_planner() does, and the parent query level can
use each of those Paths as the basis of a SubqueryScanPath at its level.
This allows finding some optimizations that we missed before, wherein a
subquery was capable of returning presorted data and thereby avoiding a
sort in the parent level, making the overall cost cheaper even though
delivering sorted output was not the cheapest plan for the subquery in
isolation. (A couple of regression test outputs change in consequence of
that. However, there is very little change in visible planner behavior
overall, because the point of this patch is not to get immediate planning
benefits but to create the infrastructure for future improvements.)
There is a great deal left to do here. This patch unblocks a lot of
planner work that was basically impractical in the old code structure,
such as allowing FDWs to implement remote aggregation, or rewriting
plan_set_operations() to allow consideration of multiple implementation
orders for set operations. (The latter will likely require a full
rewrite of plan_set_operations(); what I've done here is only to fix it
to return Paths not Plans.) I have also left unfinished some localized
refactoring in createplan.c and planner.c, because it was not necessary
to get this patch to a working state.
Thanks to Robert Haas, David Rowley, and Amit Kapila for review.
Tom Lane [Mon, 7 Mar 2016 15:40:44 +0000 (10:40 -0500)]
Fix backwards test for Windows service-ness in pg_ctl.
A thinko in a96761391 caused pg_ctl to get it exactly backwards when
deciding whether to report problems to the Windows eventlog or to stderr.
Per bug #14001 from Manuel Mathar, who also identified the fix.
Like the previous patch, back-patch to all supported branches.
Tom Lane [Mon, 7 Mar 2016 02:04:25 +0000 (21:04 -0500)]
Fix broken definition for function name in pgbench's exprscan.l.
As written, this would accept e.g. 123e9 as a function name. Aside
from being mildly astonishing, that would come back to haunt us if
we ever try to add float constants to the expression syntax. Insist
that function names start with letters (or at least non-digits).
In passing reset yyline as well as yycol when starting a new expression.
This variable is useless since it's used nowhere, but if we're going
to have it we should have it act sanely.
In c8f621c43 I forgot to account for MAXALIGN when allocating a new
tuplebuf in ReorderBufferGetTupleBuf(). That happens to currently not
cause active problems on a number of platforms because the affected
pointer is already aligned, but others, like ppc and hppa, trigger this
in the regression test, due to a debug memset clearing memory.
Tom Lane [Mon, 7 Mar 2016 00:20:55 +0000 (19:20 -0500)]
Fix not-terribly-safe coding in NIImportOOAffixes() and NIImportAffixes().
There were two places in spell.c that supposed that they could search
for a location in a string produced by lowerstr() and then transpose
the offset into the original string. But this fails completely if
lowerstr() transforms any characters into characters of different byte
length, as can happen in Turkish UTF8 for instance.
We'd added some comments about this coding in commit 51e78ab4ff328296,
but failed to realize that it was not merely confusing but wrong.
Coverity complained about this code years ago, but in such an opaque
fashion that nobody understood what it was on about. I'm not entirely
sure that this issue *is* what it's on about, actually, but perhaps
this patch will shut it up -- and in any case the problem is clear.
Tom Lane [Sun, 6 Mar 2016 23:23:53 +0000 (18:23 -0500)]
Fix unportable usage of <ctype.h> functions.
isdigit(), isspace(), etc are likely to give surprising results if passed a
signed char. We should always cast the argument to unsigned char to avoid
that. Error in commit d78a7d9c7fa3e9cd, found by buildfarm member gaur.
Andres Freund [Sun, 6 Mar 2016 02:02:20 +0000 (18:02 -0800)]
logical decoding: Fix handling of large old tuples with replica identity full.
When decoding the old version of an UPDATE or DELETE change, and if that
tuple was bigger than MaxHeapTupleSize, we either Assert'ed out, or
failed in more subtle ways in non-assert builds. Normally individual
tuples aren't bigger than MaxHeapTupleSize, with big datums toasted.
But that's not the case for the old version of a tuple for logical
decoding; the replica identity is logged as one piece. With the default
replica identity btree limits that to small tuples, but that's not the
case for FULL.
Change the tuple buffer infrastructure to separate allocate over-large
tuples, instead of always going through the slab cache.
This unfortunately requires changing the ReorderBufferTupleBuf
definition, we need to store the allocated size someplace. To avoid
requiring output plugins to recompile, don't store HeapTupleHeaderData
directly after HeapTupleData, but point to it via t_data; that leaves
rooms for the allocated size. As there's no reason for an output plugin
to look at ReorderBufferTupleBuf->t_data.header, remove the field. It
was just a minor convenience having it directly accessible.
Reported-By: Adam Dratwiński
Discussion: CAKg6ypLd7773AOX4DiOGRwQk1TVOQKhNwjYiVjJnpq8Wo+i62Q@mail.gmail.com
Andres Freund [Sun, 6 Mar 2016 02:02:20 +0000 (18:02 -0800)]
logical decoding: old/newtuple in spooled UPDATE changes was switched around.
Somehow I managed to flip the order of restoring old & new tuples when
de-spooling a change in a large transaction from disk. This happens to
only take effect when a change is spooled to disk which has old/new
versions of the tuple. That only is the case for UPDATEs where he
primary key changed or where replica identity is changed to FULL.
The tests didn't catch this because either spooled updates, or updates
that changed primary keys, were tested; not both at the same time.
Found while adding tests for the following commit.
Andres Freund [Sun, 6 Mar 2016 02:02:20 +0000 (18:02 -0800)]
logical decoding: Tell reorderbuffer about all xids.
Logical decoding's reorderbuffer keeps transactions in an LSN ordered
list for efficiency. To make that's efficiently possible upper-level
xids are forced to be logged before nested subtransaction xids. That
only works though if these records are all looked at: Unfortunately we
didn't do so for e.g. row level locks, which are otherwise uninteresting
for logical decoding.
This could lead to errors like:
"ERROR: subxact logged without previous toplevel record".
It's not sufficient to just look at row locking records, the xid could
appear first due to a lot of other types of records (which will trigger
the transaction to be marked logged with MarkCurrentTransactionIdLoggedIfAny).
So invent infrastructure to tell reorderbuffer about xids seen, when
they'd otherwise not pass through reorderbuffer.c.
Reported-By: Jarred Ward
Bug: #13844
Discussion: 20160105033249.1087.66040@wrigleys.postgresql.org
Backpatch: 9.4, where logical decoding was added
Joe Conway [Sat, 5 Mar 2016 19:10:19 +0000 (11:10 -0800)]
Expose control file data via SQL accessible functions.
Add four new SQL accessible functions: pg_control_system(),
pg_control_checkpoint(), pg_control_recovery(), and pg_control_init()
which expose a subset of the control file data.
Along the way move the code to read and validate the control file to
src/common, where it can be shared by the new backend functions
and the original pg_controldata frontend program.
Patch by me, significant input, testing, and review by Michael Paquier.
Fujii Masao [Sat, 5 Mar 2016 17:29:04 +0000 (02:29 +0900)]
Ignore recovery_min_apply_delay until recovery has reached consistent state
Previously recovery_min_apply_delay was applied even before recovery
had reached consistency. This could cause us to wait a long time
unexpectedly for read-only connections to be allowed. It's problematic
because the standby was useless during that wait time.
This patch changes recovery_min_apply_delay so that it's applied once
the database has reached the consistent state. That is, even if the delay
is set, the standby tries to replay WAL records as fast as possible until
it has reached consistency.
Author: Michael Paquier Reviewed-By: Julien Rouhaud Reported-By: Greg Clough
Backpatch: 9.4, where recovery_min_apply_delay was added
Bug: #13770
Discussion: http://www.postgresql.org/message-id/20151111155006.2644.84564@wrigleys.postgresql.org
Tom Lane [Fri, 4 Mar 2016 21:20:44 +0000 (16:20 -0500)]
Make stats regression test robust in the face of parallel query.
Historically, the wait_for_stats() function in this test has simply checked
for a report of an indexscan on tenk2, corresponding to the last command
issued before we expect stats updates to appear. However, with parallel
query that indexscan could be done by a parallel worker that will emit
its stats counters to the collector before the session's main backend does
(a full second before, in fact, thanks to the "pg_sleep(1.0)" added by
commit 957d08c81f9cc277). That leaves a sizable window in which an
autovacuum-triggered write of the stats files would present a state in
which the indexscan on tenk2 appears to have been done, but none of the
write updates performed by the test have been. This is evidently the
explanation for intermittent failures seen by me and on buildfarm member
mandrill.
To fix, we should check separately for both the tenk2 seqscan and indexscan
counts, since those might be reported by different processes that could be
delayed arbitrarily on an overloaded test machine. And we need to check
for at least one update-related count. If we ever allow parallel workers
to do writes, this will get even more complicated ... but in view of all
the other hard problems that will entail, I don't feel a need to solve this
one today.
Per research by Rahila Syed and myself; part of this patch is Rahila's.
Robert Haas [Fri, 4 Mar 2016 19:12:28 +0000 (14:12 -0500)]
Minor improvements to transaction manager README.
A simple SELECT is handled by PortalRunSelect, not ProcessQuery. Also,
the previous indentation was unclear: change it so that a deeper level
of indentation indicates that the outer function calls the inner one.
Robert Haas [Fri, 4 Mar 2016 17:59:10 +0000 (12:59 -0500)]
Minor optimizations based on ParallelContext having nworkers_launched.
Originally, we didn't have nworkers_launched, so code that used parallel
contexts had to be preprared for the possibility that not all of the
workers requested actually got launched. But now we can count on knowing
the number of workers that were successfully launched, which can shave
off a few cycles and simplify some code slightly.
Amit Kapila, reviewed by Haribabu Kommi, per a suggestion from Peter
Geoghegan.
Teodor Sigaev [Fri, 4 Mar 2016 17:08:10 +0000 (20:08 +0300)]
Improve support of Hunspell in ispell dictionary.
Now it's possible to load recent version of Hunspell for several languages.
To handle these dictionaries Hunspell patch adds support for:
* FLAG long - sets the double extended ASCII character flag type
* FLAG num - sets the decimal number flag type (from 1 to 65535)
* AF parameter - alias for flag's set
Also it moves test dictionaries into separate directory.
Robert Haas [Fri, 4 Mar 2016 16:53:20 +0000 (11:53 -0500)]
Fix query-based tab completion for multibyte characters.
The existing code confuses the byte length of the string (which is
relevant when passing it to pg_strncasecmp) with the character length
of the string (which is relevant when it is used with the SQL substring
function). Separate those two concepts.
Report and patch by Kyotaro Horiguchi, reviewed by Thomas Munro and
reviewed and further revised by me.
Robert Haas [Fri, 4 Mar 2016 16:35:46 +0000 (11:35 -0500)]
postgres_fdw: When sending ORDER BY, always include NULLS FIRST/LAST.
Previously, we included NULLS FIRST when appropriate but relied on the
default behavior to be NULLS LAST. This is, however, not true for a
sort in descending order and seems like a fragile assumption anyway.
Report by Rajkumar Raghuwanshi. Patch by Ashutosh Bapat. Review
comments from Michael Paquier and Tom Lane.
Alvaro Herrera [Fri, 4 Mar 2016 15:59:47 +0000 (12:59 -0300)]
Add 'tap_tests' flag in config_default.pl
This makes the flag more visible for testers using the default file as a
template, increasing the likelyhood that the test suite will be run.
Also have the flag be displayed in the fake "configure" output, if set.
This patch is two new lines only, but perltidy decides to shift things
around which makes it appear a bit bigger.
Alvaro Herrera [Thu, 3 Mar 2016 20:58:30 +0000 (17:58 -0300)]
Rework PostgresNode's psql method
This makes the psql() method much more capable: it captures both stdout
and stderr; it now returns the psql exit code rather than stdout; a
timeout can now be specified, as can ON_ERROR_STOP behavior; it gained a
new "on_error_die" (defaulting to off) parameter to raise an exception
if there's any problem. Finally, additional parameters to psql can be
passed if there's need for further tweaking.
For convenience, a new safe_psql() method retains much of the old
behavior of psql(), except that it uses on_error_die on, so that
problems like syntax errors in SQL commands can be detected more easily.
Many existing TAP test files now use safe_psql, which is what is really
wanted. A couple of ->psql() calls are now added in the commit_ts
tests, which verify that the right thing is happening on certain errors.
Some ->command_fails() calls in recovery tests that were verifying that
psql failed also became ->psql() calls now.
Author: Craig Ringer. Some tweaks by Álvaro Herrera Reviewed-By: Michaël Paquier
Alvaro Herrera [Thu, 3 Mar 2016 16:20:46 +0000 (13:20 -0300)]
perltidy PostgresNode and SimpleTee
Also, mention in README that Perl files should be perltidy'ed. This
isn't really the best place (since we have Perl files elsewhere in the
tree) and this is already in pgindent's README, but this subdir is
likely to get hacked a whole lot more than the other Perl files, so it
seems okay to spend two lines on this.
Alvaro Herrera [Thu, 3 Mar 2016 15:49:02 +0000 (12:49 -0300)]
Fix mistakes in recovery tests
One test was relying on method remove_tree that isn't implemented in the
oldest Perl we support; fix it by using the older rmtree instead.
Another test had a typo in a SQL command, which isn't noticed because
the PostgresNode->psql() method doesn't check that queries return
correctly. That's undesirable and will also be fixed later on, but for
now let's make the test actually work.
Andres Freund [Thu, 3 Mar 2016 07:42:21 +0000 (23:42 -0800)]
logical decoding: fix decoding of a commit's commit time.
When adding replication origins in 5aa235042, I somehow managed to set
the timestamp of decoded transactions to InvalidXLogRecptr when decoding
one made without a replication origin. Fix that, and the wrong type of
the new commit_time variable.
This didn't trigger a regression test failure because we explicitly
don't show commit timestamps in the regression tests, as they obviously
are variable. Add a test that checks that a decoded commit's timestamp
is within minutes of NOW() from before the commit.
Reported-By: Weiping Qu Diagnosed-By: Artur Zakirov
Discussion: 56D4197E.9050706@informatik.uni-kl.de, 56D42918.1010108@postgrespro.ru
Backpatch: 9.5, where 5aa235042 originates.
Tom Lane [Thu, 3 Mar 2016 04:31:39 +0000 (23:31 -0500)]
Fix json_to_record() bug with nested objects.
A thinko concerning nesting depth caused json_to_record() to produce bogus
output if a field of its input object contained a sub-object with a field
name matching one of the requested output column names. Per bug #13996
from Johann Visagie.
I added a regression test case based on his example, plus parallel tests
for json_to_recordset, jsonb_to_record, jsonb_to_recordset. The latter
three do not exhibit the same bug (which suggests that we may be missing
some opportunities to share code...) but testing seems like a good idea
in any case.
Back-patch to 9.4 where these functions were introduced.
Tom Lane [Wed, 2 Mar 2016 22:37:54 +0000 (17:37 -0500)]
Create stub functions to support pg_upgrade of old contrib/tsearch2.
Commits 9ff60273e35cad6e and dbe2328959e12701 adjusted the declarations
of some core functions referenced by contrib/tsearch2's install script,
forgetting that in a pg_upgrade situation, we'll be trying to restore
operator class definitions that reference the old signatures. We've
hit this problem before; solve it in the same way as before, namely by
installing stub functions that have the expected signature and just
invoke the correct function. Per report from Jeff Janes.
(Someday we ought to stop supporting contrib/tsearch2, but I'm not
sure today is that day.)
Tom Lane [Wed, 2 Mar 2016 18:30:14 +0000 (13:30 -0500)]
Fix PL/Tcl's encoding conversion logic.
PL/Tcl appears to contain logic to convert strings between the database
encoding and UTF8, which is the only encoding modern Tcl will deal with.
However, that code has been disabled since commit 034895125d648b86, which
made it "#if defined(UNICODE_CONVERSION)" and neglected to provide any way
for that symbol to become defined. That might have been all right back
in 2001, but these days we take a dim view of allowing strings with
incorrect encoding into the database.
Remove the conditional compilation, fix warnings about signed/unsigned char
conversions, clean up assorted places that didn't bother with conversions.
(Notably, there were lots of assumptions that database table and field
names didn't need conversion...)
Add a regression test based on plpython_unicode. It's not terribly
thorough, but better than no test at all.
Tom Lane [Wed, 2 Mar 2016 17:24:30 +0000 (12:24 -0500)]
Make PL/Tcl require Tcl 8.4 or later.
As of commit 287822068246a6ae30bb2c7191de727672ae6328, PL/Tcl will not
compile against pre-8.0 Tcl, whereas it used to work (more or less anyway)
with quite prehistoric versions. As long as we're moving these goalposts,
let's reinstall them at someplace that has some thought behind it. This
commit sets the minimum allowed Tcl version at 8.4, and rips out some bits
of compatibility cruft that are in consequence no longer needed. Reasons
for requiring 8.4 include:
* 8.4 was released in 2002; there seems little reason to believe that
anyone would want to use older versions with Postgres 9.6+.
* We have no buildfarm members testing anything older than 8.4, and
thus no way to know if it's broken.
* We need at least 8.1 to allow enforcement of database encoding
security (8.1 standardized Tcl on using UTF8 internally, before that
it was pretty unpredictable).
* Some versions between 8.1 and 8.4 allowed the backend to become
multithreaded, which is disastrous. We need at least 8.4 to be able
to disable the Tcl notifier subsystem to prevent that.
A small side benefit is that we can make the code more readable by
doing s/CONST84/const/g.
Tom Lane [Wed, 2 Mar 2016 17:07:31 +0000 (12:07 -0500)]
Convert PL/Tcl to use Tcl's "object" interfaces.
The original implementation of Tcl was all strings, but they improved
performance significantly by introducing typed "objects" (integers,
lists, code, etc). It's past time we made use of that; that happened
in Tcl 8.0 which was released in 1997.
This patch also modernizes some of the error-reporting code, which may
cause small changes in the spelling of complaints about bad calls to
PL/Tcl-provided commands.
Jim Nasby and Karl Lehenbauer, reviewed by Victor Wagner
Tom Lane [Wed, 2 Mar 2016 06:06:31 +0000 (01:06 -0500)]
Fix TAP tests for older Perls.
Commit 7132810c (Retain tempdirs for failed tests) used Test::More's
is_passing method, but that was added in Test::More 0.89_01 which is
sometime later than Perl 5.10.1. Popular platforms such as RHEL6 don't
have that, nevermind some of our older dinosaurs. Do it the hard way.
Michael Paquier, based on research by Craig Ringer
Robert Haas [Wed, 2 Mar 2016 02:49:41 +0000 (21:49 -0500)]
Change the format of the VM fork to add a second bit per page.
The new bit indicates whether every tuple on the page is already frozen.
It is cleared only when the all-visible bit is cleared, and it can be
set only when we vacuum a page and find that every tuple on that page is
both visible to every transaction and in no need of any future
vacuuming.
A future commit will use this new bit to optimize away full-table scans
that would otherwise be triggered by XID wraparound considerations. A
page which is merely all-visible must still be scanned in that case, but
a page which is all-frozen need not be. This commit does not attempt
that optimization, although that optimization is the goal here. It
seems better to get the basic infrastructure in place first.
Per discussion, it's very desirable for pg_upgrade to automatically
migrate existing VM forks from the old format to the new format. That,
too, will be handled in a follow-on patch.
Masahiko Sawada, reviewed by Kyotaro Horiguchi, Fujii Masao, Amit
Kapila, Simon Riggs, Andres Freund, and others, and substantially
revised by me.
Tom Lane [Wed, 2 Mar 2016 01:01:07 +0000 (20:01 -0500)]
Improve coverage of pltcl regression tests.
Test composite-type arguments and the argisnull and spi_lastoid Tcl
commmands. This stuff was not covered before, but needs to be exercised
since the upcoming Tcl object-conversion patch changes these code paths
(and broke at least one of them).
Alvaro Herrera [Tue, 1 Mar 2016 22:53:18 +0000 (19:53 -0300)]
Add more tests for commit_timestamp feature
These tests verify that 1) WAL replay preserves the stored value,
2) a streaming standby server replays the value obtained from the
master, and 3) the behavior is sensible in the face of repeated
configuration changes.
One annoyance is that tmp_check/ subdir from the TAP tests is clobbered
when the pg_regress test runs in the same subdirectory. This is
bothersome but not too terrible a problem, since the pg_regress test is
not run anyway if the TAP tests fail (unless "make -k" is used).
I had these tests around since commit 69e7235c93e2; add them now that we
have the recovery test framework in place.
Robert Haas [Tue, 1 Mar 2016 18:04:09 +0000 (13:04 -0500)]
Extend pgbench's expression syntax to support a few built-in functions.
Fabien Coelho, reviewed mostly by Michael Paquier and me, but also by
Heikki Linnakangas, BeomYong Lee, Kyotaro Horiguchi, Oleksander
Shulgin, and Álvaro Herrera.