Enforce cube dimension limit in all cube construction functions
contrib/cube has a limit to 100 dimensions for cube datatype. However, it's
not enforced everywhere, and one can actually construct cube with more than
100 dimensions having then trouble with dump/restore. This commit add checks
for dimensions limit in all functions responsible for cube construction.
Backpatch to all supported versions.
Reported-by: Andrew Gierth
Discussion: https://postgr.es/m/87va7uybt4.fsf%40news-spur.riddles.org.uk
Author: Andrey Borodin with small additions by me
Review: Tom Lane
Backpatch-through: 9.3
Split contrib/cube platform-depended checks into separate test
We're currently maintaining two outputs for cube regression test. But that
appears to be unsuitable, because these outputs are different in out few checks
involving scientific notation. So, split checks involving scientific notation
into separate test, making contrib/cube easier to maintain. Backpatch to all
supported versions in order to make further backpatching easier.
Discussion: https://postgr.es/m/CAPpHfdvJgWjxHsJTtT%2Bo1tz3OR8EFHcLQjhp-d3%2BUcmJLh-fQA%40mail.gmail.com
Author: Alexander Korotkov
Backpatch-through: 9.3
Tom Lane [Fri, 31 Aug 2018 16:26:20 +0000 (12:26 -0400)]
Make checksum_impl.h safe to compile with -fstrict-aliasing.
In general, Postgres requires -fno-strict-aliasing with compilers that
implement C99 strict aliasing rules. There's little hope of getting
rid of that overall. But it seems like it would be a good idea if
storage/checksum_impl.h in particular didn't depend on it, because
that header is explicitly intended to be included by external programs.
We don't have a lot of control over the compiler switches that an
external program might use, as shown by Michael Banck's report of
failure in a privately-modified version of pg_verify_checksums.
Hence, switch to using a union in place of willy-nilly pointer casting
inside this file. I think this makes the code a bit more readable
anyway.
checksum_impl.h hasn't changed since it was introduced in 9.3,
so back-patch all the way.
Etsuro Fujita [Fri, 31 Aug 2018 11:47:17 +0000 (20:47 +0900)]
Disable support for partitionwise joins in problematic cases.
Commit f49842d, which added support for partitionwise joins, built the
child's tlist by applying adjust_appendrel_attrs() to the parent's. So in
the case where the parent's included a whole-row Var for the parent, the
child's contained a ConvertRowtypeExpr. To cope with that, that commit
added code to the planner, such as setrefs.c, but some code paths still
assumed that the tlist for a scan (or join) rel would only include Vars
and PlaceHolderVars, which was true before that commit, causing errors:
* When creating an explicit sort node for an input path for a mergejoin
path for a child join, prepare_sort_from_pathkeys() threw the 'could not
find pathkey item to sort' error.
* When deparsing a relation participating in a pushed down child join as a
subquery in contrib/postgres_fdw, get_relation_column_alias_ids() threw
the 'unexpected expression in subquery output' error.
* When performing set_plan_references() on a local join plan generated by
contrib/postgres_fdw for EvalPlanQual support for a pushed down child
join, fix_join_expr() threw the 'variable not found in subplan target
lists' error.
To fix these, two approaches have been proposed: one by Ashutosh Bapat and
one by me. While the former keeps building the child's tlist with a
ConvertRowtypeExpr, the latter builds it with a whole-row Var for the
child not to violate the planner assumption, and tries to fix it up later,
But both approaches need more work, so refuse to generate partitionwise
join paths when whole-row Vars are involved, instead. We don't need to
handle ConvertRowtypeExprs in the child's tlists for now, so this commit
also removes the changes to the planner.
Previously, partitionwise join computed attr_needed data for each child
separately, and built the child join's tlist using that data, which also
required an extra step for adding PlaceHolderVars to that tlist, but it
would be more efficient to build it from the parent join's tlist through
the adjust_appendrel_attrs() transformation. So this commit builds that
list that way, and simplifies build_joinrel_tlist() and placeholder.c as
well as part of set_append_rel_size() to basically what they were before
partitionwise join went in.
Back-patch to PG11 where partitionwise join was introduced.
Report by Rajkumar Raghuwanshi. Analysis by Ashutosh Bapat, who also
provided some of regression tests. Patch by me, reviewed by Robert Haas.
Amit Kapila [Fri, 31 Aug 2018 10:15:09 +0000 (15:45 +0530)]
Fix pg_verify_checksums on Windows.
To verify the checksums, we open the file in text mode which doesn't work
on Windows as WIN32 treats Control-Z as EOF in files opened in text mode.
This leads to "short read of block .." error in some cases.
Fix it by opening the files in the binary mode.
Author: Amit Kapila Reviewed-by: Magnus Hagander
Backpatch-through: 11
Discussion: https://postgr.es/m/CAA4eK1+LOnzod+h85FGmyjWzXKy-XV1FYwEyP-Tky2WpD5cxwA@mail.gmail.com
Michael Paquier [Thu, 30 Aug 2018 00:10:13 +0000 (17:10 -0700)]
Stop bgworkers during fast shutdown with postmaster in startup phase
When a postmaster gets into its phase PM_STARTUP, it would start
background workers using BgWorkerStart_PostmasterStart mode immediately,
which would cause problems for a fast shutdown as the postmaster forgets
to send SIGTERM to already-started background workers. With smart and
immediate shutdowns, this correctly happened, and fast shutdown is the
only mode missing the shot.
Author: Alexander Kukushkin Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAFh8B=mvnD8+DZUfzpi50DoaDfZRDfd7S=gwj5vU9GYn8UvHkA@mail.gmail.com
Backpatch-through: 9.5
Tom Lane [Tue, 28 Aug 2018 23:46:59 +0000 (19:46 -0400)]
Make pg_restore's identify_locking_dependencies() more bulletproof.
This function had a blacklist of dump object types that it believed
needed exclusive lock ... but we hadn't maintained that, so that it
was missing ROW SECURITY, POLICY, and INDEX ATTACH items, all of
which need (or should be treated as needing) exclusive lock.
Since the same oversight seems likely in future, let's reverse the
sense of the test so that the code has a whitelist of safe object
types; better to wrongly assume a command can't be run in parallel
than the opposite. Currently the only POST_DATA object type that's
safe is CREATE INDEX ... and that list hasn't changed in a long time.
Tom Lane [Tue, 28 Aug 2018 23:33:04 +0000 (19:33 -0400)]
Code review for pg_dump's handling of ALTER INDEX ATTACH PARTITION.
Ensure the TOC entry is marked with the correct schema, so that its
name is as unique as the index's is.
Fix the dependencies: we want dependencies from this TOC entry to the
two indexes it depends on, and we don't care (at least not for this
purpose) what order the indexes are created in. Also, add dependencies
on the indexes' underlying tables. Those might seem pointless given
the index dependencies, but they are helpful to cue parallel restore
to avoid running the ATTACH PARTITION in parallel with other DDL on
the same tables.
Tom Lane [Tue, 28 Aug 2018 21:26:09 +0000 (17:26 -0400)]
Include contrib modules in the temp installation even without REGRESS.
Now that we have TAP tests, a contrib module may have something useful
to do in "make check" even if it has no pg_regress-style regression
scripts, and hence no REGRESS setting. But the TAP tests will fail,
or else test the wrong installed files, unless we install the contrib
module into the temp installation. So move the bit about adding to
EXTRA_INSTALL so that it applies regardless.
We might want this in back branches in future, but for the moment
I only risked adding it to v11.
Andrew Gierth [Tue, 28 Aug 2018 13:43:51 +0000 (14:43 +0100)]
postgres_fdw: don't push ORDER BY with no vars (bug #15352)
Commit aa09cd242 changed a condition in find_em_expr_for_rel from
being a bms_equal comparison of relids to bms_is_subset, in order to
support order by clauses on foreign joins. But this also allows
through the degenerate case of expressions with no Vars at all (and
hence empty relids), including integer constants which will be parsed
unexpectedly on the remote (viz. "ERROR: ORDER BY position 0 is not in
select list" as in the bug report).
Repair by adding an additional !bms_is_empty test.
Backpatch through to 9.6 where the aforementioned change was made.
Per bug #15352 from Maksym Boguk; analysis and patch by me.
Andrew Gierth [Tue, 28 Aug 2018 08:52:25 +0000 (09:52 +0100)]
Avoid quadratic slowdown in regexp match/split functions.
regexp_matches, regexp_split_to_table and regexp_split_to_array all
work by compiling a list of match positions as character offsets (NOT
byte positions) in the source string.
Formerly, they then used text_substr to extract the matched text; but
in a multi-byte encoding, that counts the characters in the string,
and the characters needed to reach the starting byte position, on
every call. Accordingly, the performance degraded as the product of
the input string length and the number of match positions, such that
splitting a string of a few hundred kbytes could take many minutes.
Repair by keeping the wide-character copy of the input string
available (only in the case where encoding_max_length is not 1) after
performing the match operation, and extracting substrings from that
instead. This reduces the complexity to being linear in the number of
result bytes, discounting the actual regexp match itself (which is not
affected by this patch).
In passing, remove cleanup using retail pfree() which was obsoleted by
commit ff428cded (Feb 2008) which made cleanup of SRF multi-call
contexts automatic. Also increase (to ~134 million) the maximum number
of matches and provide an error message when it is reached.
Backpatch all the way because this has been wrong forever.
Peter Eisentraut [Tue, 28 Aug 2018 09:49:11 +0000 (11:49 +0200)]
pg_verify_checksums: Message style improvements and NLS support
The source code was already set up for NLS support, so just a nls.mk
file needed to be added. Also, fix the old problem of putting the int64
format specifier right into the string, which breaks NLS.
Peter Eisentraut [Thu, 23 Aug 2018 13:13:48 +0000 (15:13 +0200)]
Fix snapshot leak warning for some procedures
The problem arises with the combination of CALL with output parameters
and doing a COMMIT inside the procedure. When a CALL has output
parameters, the portal uses the strategy PORTAL_UTIL_SELECT instead of
PORTAL_MULTI_QUERY. Using PORTAL_UTIL_SELECT causes the portal's
snapshot to be registered with the current resource
owner (portal->holdSnapshot); see 9ee1cf04ab6bcefe03a11837b53f29ca9dc24c7a for the reason.
Normally, PortalDrop() unregisters the snapshot. If not, then
ResourceOwnerRelease() will print a warning about a snapshot leak on
transaction commit. A transaction commit normally drops all
portals (PreCommit_Portals()), except the active portal. So in case of
the active portal, we need to manually release the snapshot to avoid the
warning.
Reported-by: Prabhat Sahu <prabhat.sahu@enterprisedb.com> Reviewed-by: Jonathan S. Katz <jkatz@postgresql.org>
Tom Lane [Mon, 27 Aug 2018 19:11:12 +0000 (15:11 -0400)]
Fix missing dependency for pg_dump's ENABLE ROW LEVEL SECURITY items.
The archive should show a dependency on the item's table, but it failed
to include one. This could cause failures in parallel restore due to
emitting ALTER TABLE ... ENABLE ROW LEVEL SECURITY before restoring
the table's data. In practice the odds of a problem seem low, since
you would typically need to have set FORCE ROW LEVEL SECURITY as well,
and you'd also need a very high --jobs count to have any chance of this
happening. That probably explains the lack of field reports.
Still, it's a bug, so back-patch to 9.5 where RLS was introduced.
Tom Lane [Sun, 26 Aug 2018 18:21:55 +0000 (14:21 -0400)]
Make syslogger more robust against failures in opening CSV log files.
The previous coding figured it'd be good enough to postpone opening
the first CSV log file until we got a message we needed to write there.
This is unsafe, though, because if the open fails we end up in infinite
recursion trying to report the failure. Instead make the CSV log file
management code look as nearly as possible like the longstanding logic
for the stderr log file. In particular, open it immediately at postmaster
startup (if enabled), or when we get a SIGHUP in which we find that
log_destination has been changed to enable CSV logging.
It seems OK to fail if a postmaster-start-time open attempt fails, as
we've long done for the stderr log file. But we can't die if we fail
to open a CSV log file during SIGHUP, so we're still left with a problem.
In that case, write any output meant for the CSV log file to the stderr
log file. (This will also cover race-condition cases in which backends
send CSV log data before or after we have the CSV log file open.)
This patch also fixes an ancient oversight that, if CSV logging was
turned off during a SIGHUP, we never actually closed the last CSV
log file.
In passing, remember to reset whereToSendOutput = DestNone during syslogger
start, since (unlike all other postmaster children) it's forked before the
postmaster has done that. This made for a platform-dependent difference
in error reporting behavior between the syslogger and other children:
except on Windows, it'd report problems to the original postmaster stderr
as well as the normal error log file(s). It's barely possible that that
was intentional at some point; but it doesn't seem likely to be desirable
in production, and the platform dependency definitely isn't desirable.
Per report from Alexander Kukushkin. It's been like this for a long time,
so back-patch to all supported branches.
Bruce Momjian [Sat, 25 Aug 2018 17:35:14 +0000 (13:35 -0400)]
doc: "Latest checkpoint location" will not match in pg_upgrade
Mention that "Latest checkpoint location" will not match in pg_upgrade
if the standby server is still running during the upgrade, which is
possible. "Match" text first appeared in PG 9.5.
Reported-by: Paul Bonaud
Discussion: https://postgr.es/m/c7268794-edb4-1772-3bfd-04c54585c24e@trainline.com
Tom Lane [Fri, 24 Aug 2018 14:51:10 +0000 (10:51 -0400)]
Suppress uninitialized-variable warning in new SCRAM code.
While we generally don't sweat too much about "may be used uninitialized"
warnings from older compilers, I noticed that there's a fair number of
buildfarm animals that are producing such a warning *only* for this
variable. So it seems worth silencing.
Andrew Gierth [Thu, 23 Aug 2018 17:29:18 +0000 (18:29 +0100)]
Fix lexing of standard multi-character operators in edge cases.
Commits c6b3c939b (which fixed the precedence of >=, <=, <> operators)
and 865f14a2d (which added support for the standard => notation for
named arguments) created a class of lexer tokens which look like
multi-character operators but which have their own token IDs distinct
from Op. However, longest-match rules meant that following any of
these tokens with another operator character, as in (1<>-1), would
cause them to be incorrectly returned as Op.
The error here isn't immediately obvious, because the parser would
usually still find the correct operator via the Op token, but there
were more subtle problems:
1. If immediately followed by a comment or +-, >= <= <> would be given
the old precedence of Op rather than the correct new precedence;
2. If followed by a comment, != would be returned as Op rather than as
NOT_EQUAL, causing it not to be found at all;
3. If followed by a comment or +-, the => token for named arguments
would be lexed as Op, causing the argument to be mis-parsed as a
simple expression, usually causing an error.
Fix by explicitly checking for the operators in the {operator} code
block in addition to all the existing special cases there.
Backpatch to 9.5 where the problem was introduced.
Analysis and patch by me; review by Tom Lane.
Discussion: https://postgr.es/m/87va851ppl.fsf@news-spur.riddles.org.uk
Andrew Gierth [Thu, 23 Aug 2018 19:01:03 +0000 (20:01 +0100)]
Reduce an unnecessary O(N^3) loop in lexer.
The lexer's handling of operators contained an O(N^3) hazard when
dealing with long strings of + or - characters; it seems hard to
prevent this case from being O(N^2), but the additional N multiplier
was not needed.
Backpatch all the way since this has been there since 7.x, and it
presents at least a mild hazard in that trying to do Bind, PREPARE or
EXPLAIN on a hostile query could take excessive time (without
honouring cancels or timeouts) even if the query was never executed.
Tom Lane [Thu, 23 Aug 2018 20:39:19 +0000 (16:39 -0400)]
In libpq, don't look up all the hostnames at once.
Historically, we looked up the target hostname in connectDBStart, so that
PQconnectPoll did not need to do DNS name resolution. The patches that
added multiple-target-host support to libpq preserved this division of
labor; but it's really nonsensical now, because it means that if any one
of the target hosts fails to resolve in DNS, the connection fails. That
negates the no-single-point-of-failure goal of the feature. Additionally,
DNS lookups aren't exactly cheap, but the code did them all even if the
first connection attempt succeeds.
Hence, rearrange so that PQconnectPoll does the lookups, and only looks
up a hostname when it's time to try that host. This does mean that
PQconnectPoll could block on a DNS lookup --- but if you wanted to avoid
that, you should be using hostaddr, as the documentation has always
specified. It seems fairly unlikely that any applications would really
care whether the lookup occurs inside PQconnectStart or PQconnectPoll.
In addition to calling out that fact explicitly, do some other minor
wordsmithing in the docs around the multiple-target-host feature.
Since this seems like a bug in the multiple-target-host feature,
backpatch to v10 where that was introduced. In the back branches,
avoid moving any existing fields of struct pg_conn, just in case
any third-party code is looking into that struct.
Peter Eisentraut [Thu, 23 Aug 2018 15:20:47 +0000 (17:20 +0200)]
PL/pgSQL: Extend test case
This test was supposed to check the interaction of INOUT and default
parameters in a procedure call, but it only checked the case where the
parameter was not supplied. Now it also checks the case where the
parameter was supplied. It was already working correctly, so no code
changes required.
Peter Eisentraut [Wed, 15 Aug 2018 21:08:34 +0000 (23:08 +0200)]
Change PROCEDURE to FUNCTION in CREATE TRIGGER syntax
Since procedures are now a different thing from functions, change the
CREATE TRIGGER and CREATE EVENT TRIGGER syntax to use FUNCTION in the
clause that specifies the function. PROCEDURE is still accepted for
compatibility.
pg_dump and ruleutils.c output is not changed yet, because that would
require a change in information_schema.sql and thus a catversion change.
Reported-by: Peter Geoghegan <pg@bowt.ie> Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>
Peter Eisentraut [Wed, 15 Aug 2018 16:05:46 +0000 (18:05 +0200)]
Change PROCEDURE to FUNCTION in CREATE OPERATOR syntax
Since procedures are now a different thing from functions, change the
CREATE OPERATOR syntax to use FUNCTION in the clause that specifies the
function. PROCEDURE is still accepted for compatibility.
Reported-by: Peter Geoghegan <pg@bowt.ie> Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>
Peter Eisentraut [Wed, 15 Aug 2018 15:01:39 +0000 (17:01 +0200)]
doc: Update uses of the word "procedure"
Historically, the term procedure was used as a synonym for function in
Postgres/PostgreSQL. Now we have procedures as separate objects from
functions, so we need to clean up the documentation to not mix those
terms.
In particular, mentions of "trigger procedures" are changed to "trigger
functions", and access method "support procedures" are changed to
"support functions". (The latter already used FUNCTION in the SQL
syntax anyway.) Also, the terminology in the SPI chapter has been
cleaned up.
A few tests, examples, and code comments are also adjusted to be
consistent with documentation changes, but not everything.
Reported-by: Peter Geoghegan <pg@bowt.ie> Reviewed-by: Jonathan S. Katz <jonathan.katz@excoventures.com>
Michael Paquier [Wed, 22 Aug 2018 05:22:39 +0000 (14:22 +0900)]
Do not dump identity sequences with excluded parent table
This commit prevents a crash of pg_dump caused by the exclusion of a
table which has identity columns, as the table would be correctly
excluded but not its identity sequence. In order to fix that, identity
sequences are excluded if the parent table is defined as such. Knowing
about such sequences has no meaning without their parent table anyway.
Reported-by: Andy Abelisto
Author: David Rowley Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/153479393218.1316.8472285660264976457@wrigleys.postgresql.org
Backpatch-through: 10
Michael Paquier [Tue, 21 Aug 2018 06:17:25 +0000 (15:17 +0900)]
Fix set of NLS translation issues
While monitoring the code, a couple of issues related to string
translation has showed up:
- Some routines for auto-updatable views return an error string, which
sometimes missed the shot. A comment regarding string translation is
added for each routine to help with future features.
- GSSAPI authentication missed two translations.
- vacuumdb handles non-translated strings.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20180810.152131.31921918.horiguchi.kyotaro@lab.ntt.co.jp
Backpatch-through: 9.3
Noah Misch [Sun, 19 Aug 2018 08:12:22 +0000 (01:12 -0700)]
MSVC: Remove any tmp_check directory before running a TAP test suite.
Back-patch to v11, where commit 90627cf98a8e7d0531789391fd798c9bfcc3bc1a
made the GNU make build system do likewise. Without this, when a
typical PostgresNode-using test failed, subsequent runs bailed out with
a "File exists" error.
Improve error messages for CREATE OR REPLACE PROCEDURE
Change the hint to recommend DROP PROCEDURE instead of FUNCTION. Also
make the error message when changing the return type more specific to
the case of procedures.
Reported-by: Jeremy Evans <code@jeremyevans.net> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Tom Lane [Fri, 17 Aug 2018 21:12:21 +0000 (17:12 -0400)]
Ensure schema qualification in pg_restore DISABLE/ENABLE TRIGGER commands.
Previously, this code blindly followed the common coding pattern of
passing PQserverVersion(AH->connection) as the server-version parameter
of fmtQualifiedId. That works as long as we have a connection; but in
pg_restore with text output, we don't. Instead we got a zero from
PQserverVersion, which fmtQualifiedId interpreted as "server is too old to
have schemas", and so the name went unqualified. That still accidentally
managed to work in many cases, which is probably why this ancient bug went
undetected for so long. It only became obvious in the wake of the changes
to force dump/restore to execute with restricted search_path.
In HEAD/v11, let's deal with this by ripping out fmtQualifiedId's server-
version behavioral dependency, and just making it schema-qualify all the
time. We no longer support pg_dump from servers old enough to need the
ability to omit schema name, let alone restoring to them. (Also, the few
callers outside pg_dump already didn't work with pre-schema servers.)
In older branches, that's not an acceptable solution, so instead just
tweak the DISABLE/ENABLE TRIGGER logic to ensure it will schema-qualify
its output regardless of server version.
Per bug #15338 from Oleg somebody. Back-patch to all supported branches.
Andrew Gierth [Fri, 17 Aug 2018 14:04:26 +0000 (15:04 +0100)]
Set scan direction appropriately for SubPlans (bug #15336)
When executing a SubPlan in an expression, the EState's direction
field was left alone, resulting in an attempt to execute the subplan
backwards if it was encountered during a backwards scan of a cursor.
Also, though much less likely, it was possible to reach the execution
of an InitPlan while in backwards-scan state.
Repair by saving/restoring estate->es_direction and forcing forward
scan mode in the relevant places.
Backpatch all the way, since this has been broken since 8.3 (prior to
commit c7ff7663e, SubPlans had their own EStates rather than sharing
the parent plan's, so there was no confusion over scan direction).
Per bug #15336 reported by Vladimir Baranoff; analysis and patch by
me, review by Tom Lane.
Bruce Momjian [Fri, 17 Aug 2018 14:25:48 +0000 (10:25 -0400)]
pg_upgrade: issue helpful error message for use on standbys
Commit 777e6ddf1723306bd2bf8fe6f804863f459b0323 checked for a shut down
message from a standby and allowed it to continue. This patch reports a
helpful error message in these cases, suggesting to use rsync as
documented.
Alvaro Herrera [Thu, 16 Aug 2018 15:43:04 +0000 (12:43 -0300)]
Fix executor prune failure when plan already pruned
In a multi-layer partitioning setup, if at plan time all the
sub-partitions are pruned but the intermediate one remains, the executor
later throws a spurious error that there's nothing to prune. That is
correct, but there's no reason to throw an error. Therefore, don't.
Reported-by: Andreas Seltenreich <seltenreich@gmx.de>
Author: David Rowley <david.rowley@2ndquadrant.com>
Discussion: https://postgr.es/m/87in4h98i0.fsf@ansel.ydns.eu
Tomas Vondra [Thu, 16 Aug 2018 14:49:10 +0000 (16:49 +0200)]
Close the file descriptor in ApplyLogicalMappingFile
The function was forgetting to close the file descriptor, resulting
in failures like this:
ERROR: 53000: exceeded maxAllocatedDescs (492) while trying to open
file "pg_logical/mappings/map-4000-4eb-1_60DE1E08-5376b5-537c6b"
LOCATION: OpenTransientFile, fd.c:2161
Simply close the file at the end, and backpatch to 9.4 (where logical
decoding was introduced). While at it, fix a nearby typo.
Tom Lane [Wed, 15 Aug 2018 21:25:23 +0000 (17:25 -0400)]
Make snprintf.c follow the C99 standard for snprintf's result value.
C99 says that the result should be the number of bytes that would have
been emitted given a large enough buffer, not the number we actually
were able to put in the buffer. It's time to make our substitute
implementation comply with that. Not doing so results in inefficiency
in buffer-enlargement cases, and also poses a portability hazard for
third-party code that might expect C99-compliant snprintf behavior
within Postgres.
In passing, remove useless tests for str == NULL; neither C99 nor
predecessor standards ever allowed that except when count == 0,
so I see no reason to expend cycles on making that a non-crash case
for this implementation. Also, don't waste a byte in pg_vfprintf's
local I/O buffer; this might have performance benefits by allowing
aligned writes during flushbuffer calls.
Back-patch of commit 805889d7d. There was some concern about this
possibly breaking code that assumes pre-C99 behavior, but there is
much more risk (and reality, in our own code) of code that assumes
C99 behavior and hence fails to detect buffer overrun without this.
Alvaro Herrera [Wed, 15 Aug 2018 21:09:29 +0000 (18:09 -0300)]
Update FSM on WAL replay of page all-visible/frozen
We aren't very strict about keeping FSM up to date on WAL replay,
because per-page freespace values aren't critical in replicas (can't
write to heap in a replica; and if the replica is promoted, the values
would be updated by VACUUM anyway). However, VACUUM since 9.6 can skip
processing pages marked all-visible or all-frozen, and if such pages are
recorded in FSM with wrong values, those values are blindly propagated
to FSM's upper layers by VACUUM's FreeSpaceMapVacuum. (This rationale
assumes that crashes are not very frequent, because those would cause
outdated FSM to occur in the primary.)
Even when the FSM is outdated in standby, things are not too bad
normally, because, most per-page FSM values will be zero (other than
those propagated with the base-backup that created the standby); only
once the remaining free space is less than 0.2*BLCKSZ the per-page value
is maintained by WAL replay of heap ins/upd/del. However, if
wal_log_hints=on causes complete FSM pages to be propagated to a standby
via full-page images, many too-optimistic per-page values can end up
being registered in the standby.
Incorrect per-page values aren't critical in most cases, since an
inserter that is given a page that doesn't actually contain the claimed
free space will update FSM with the correct value, and retry until it
finds a usable page. However, if there are many such updates to do, an
inserter can spend a long time doing them before a usable page is found;
in a heavily trafficked insert-only table with many concurrent inserters
this has been observed to cause several second stalls, causing visible
application malfunction.
To fix this problem, it seems sufficient to have heap_xlog_visible
(replay of setting all-visible and all-frozen VM bits for a heap page)
update the FSM value for the page being processed. This fixes the
per-page counters together with making the page skippable to vacuum, so
when vacuum does FreeSpaceMapVacuum, the values propagated to FSM upper
layers are the correct ones, avoiding the problem.
While at it, apply the same fix to heap_xlog_clean (replay of tuple
removal by HOT pruning and vacuum). This makes any space freed by the
cleaning available earlier than the next vacuum in the promoted replica.
Backpatch to 9.6, where this problem was diagnosed on an insert-only
table with all-frozen pages, which were introduced as a concept in that
release. Theoretically it could apply with all-visible pages to older
branches, but there's been no report of that and it doesn't backpatch
cleanly anyway.
Tom Lane [Wed, 15 Aug 2018 20:29:32 +0000 (16:29 -0400)]
Clean up assorted misuses of snprintf()'s result value.
Fix a small number of places that were testing the result of snprintf()
but doing so incorrectly. The right test for buffer overrun, per C99,
is "result >= bufsize" not "result > bufsize". Some places were also
checking for failure with "result == -1", but the standard only says
that a negative value is delivered on failure.
(Note that this only makes these places correct if snprintf() delivers
C99-compliant results. But at least now these places are consistent
with all the other places where we assume that.)
Also, make psql_start_test() and isolation_start_test() check for
buffer overrun while constructing their shell commands. There seems
like a higher risk of overrun, with more severe consequences, here
than there is for the individual file paths that are made elsewhere
in the same functions, so this seemed like a worthwhile change.
Also fix guc.c's do_serialize() to initialize errno = 0 before
calling vsnprintf. In principle, this should be unnecessary because
vsnprintf should have set errno if it returns a failure indication ...
but the other two places this coding pattern is cribbed from don't
assume that, so let's be consistent.
These errors are all very old, so back-patch as appropriate. I think
that only the shell command overrun cases are even theoretically
reachable in practice, but there's not much point in erroneous error
checks.
Bruce Momjian [Tue, 14 Aug 2018 21:19:02 +0000 (17:19 -0400)]
pg_upgrade: fix shutdown check for standby servers
Commit 244142d32afd02e7408a2ef1f249b00393983822 only tested for the
pg_controldata output for primary servers, but standby servers have
different "Database cluster state" output, so check for that too.
Diagnosed-by: Michael Paquier
Discussion: https://postgr.es/m/20180810164240.GM13638@paquier.xyz
Tom Lane [Mon, 13 Aug 2018 17:07:52 +0000 (13:07 -0400)]
Fix libpq's implementation of per-host connection timeouts.
Commit 5f374fe7a attempted to turn the connect_timeout from an overall
maximum time limit into a per-host limit, but it didn't do a great job of
that. The timer would only get restarted if we actually detected timeout
within connectDBComplete(), not if we changed our attention to a new host
for some other reason. In that case the old timeout continued to run,
possibly causing a premature timeout failure for the new host.
Fix that, and also tweak the logic so that if we do get a timeout,
we advance to the next available IP address, not to the next host name.
There doesn't seem to be a good reason to assume that all the IP
addresses supplied for a given host name will necessarily fail the
same way as the current one. Moreover, this conforms better to the
admittedly-vague documentation statement that the timeout is "per
connection attempt". I changed that to "per host name or IP address"
to be clearer. (Note that reconnections to the same server, such as for
switching protocol version or SSL status, don't get their own separate
timeout; that was true before and remains so.)
Also clarify documentation about the interpretation of connect_timeout
values less than 2.
This seems like a bug, so back-patch to v10 where this logic came in.
Michael Paquier [Mon, 13 Aug 2018 09:49:12 +0000 (11:49 +0200)]
Make autovacuum more aggressive to remove orphaned temp tables
Commit dafa084, added in 10, made the removal of temporary orphaned
tables more aggressive. This commit makes an extra step into the
aggressiveness by adding a flag in each backend's MyProc which tracks
down any temporary namespace currently in use. The flag is set when the
namespace gets created and can be reset if the temporary namespace has
been created in a transaction or sub-transaction which is aborted. The
flag value assignment is assumed to be atomic, so this can be done in a
lock-less fashion like other flags already present in PGPROC like
databaseId or backendId, still the fact that the temporary namespace and
table created are still locked until the transaction creating those
commits acts as a barrier for other backends.
This new flag gets used by autovacuum to discard more aggressively
orphaned tables by additionally checking for the database a backend is
connected to as well as its temporary namespace in-use, removing
orphaned temporary relations even if a backend reuses the same slot as
one which created temporary relations in a past session.
The base idea of this patch comes from Robert Haas, has been written in
its first version by Tsunakawa Takayuki, then heavily reviewed by me.
Author: Tsunakawa Takayuki Reviewed-by: Michael Paquier, Kyotaro Horiguchi, Andres Freund
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8A4DC6@G01JPEXMBYT05
Backpatch: 11-, as PGPROC gains a new flag and we don't want silent ABI
breakages on already released versions.
Amit Kapila [Mon, 13 Aug 2018 04:42:39 +0000 (10:12 +0530)]
Adjust comment atop ExecShutdownNode.
After commits a315b967cc and b805b63ac2, part of the comment atop
ExecShutdownNode is redundant. Adjust it.
Author: Amit Kapila
Backpatch-through: 10 where both the mentioned commits are present.
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info
Amit Kapila [Mon, 13 Aug 2018 03:03:55 +0000 (08:33 +0530)]
Prohibit shutting down resources if there is a possibility of back up.
Currently, we release the asynchronous resources as soon as it is evident
that no more rows will be needed e.g. when a Limit is filled. This can be
problematic especially for custom and foreign scans where we can scan
backward. Fix that by disallowing the shutting down of resources in such
cases.
Reported-by: Robert Haas Analysed-by: Robert Haas and Amit Kapila
Author: Amit Kapila Reviewed-by: Robert Haas
Backpatch-through: 9.6 where this code was introduced
Discussion: https://postgr.es/m/86137f17-1dfb-42f9-7421-82fd786b04a1@anayrat.info
Andrew Gierth [Mon, 13 Aug 2018 00:45:35 +0000 (01:45 +0100)]
Avoid query-lifetime memory leaks in XMLTABLE (bug #15321)
Multiple calls to XMLTABLE in a query (e.g. laterally applying it to a
table with an xml column, an important use-case) were leaking large
amounts of memory into the per-query context, blowing up memory usage.
Repair by reorganizing memory context usage in nodeTableFuncscan; use
the usual per-tuple context for row-by-row evaluations instead of
perValueCxt, and use the explicitly created context -- renamed from
perValueCxt to perTableCxt -- for arguments and state for each
individual table-generation operation.
Backpatch to PG10 where this code was introduced.
Original report by IRC user begriffs; analysis and patch by me.
Reviewed by Tom Lane and Pavel Stehule.
Tom Lane [Sun, 12 Aug 2018 22:05:49 +0000 (18:05 -0400)]
Fix bogus loop logic in 013_crash_restart test's pump_until subroutine.
The pump_nb() step might've already received the desired data, so we must
check for that at the top of the loop not the bottom. Otherwise, the
call to pump() will sit with nothing to do until the timeout elapses.
pump_until then falls out with apparent success ... but the timeout has
been used up, causing the next call of pump_until to report a timeout
failure. I believe this explains the intermittent timeout failures
we've seen in the buildfarm ever since this test went in. I was able
to reproduce the problem on gaur semi-repeatably, and this appears to
fix it.
In passing, remove a duplicate assignment, fix one stdin-assignment to
look like the rest, and document the test's dependency on test_decoding.
Tom Lane [Sat, 11 Aug 2018 19:53:20 +0000 (15:53 -0400)]
Fix wrong order of operations in inheritance_planner.
When considering a partitioning parent rel, we should stop processing that
subroot as soon as we've done adjust_appendrel_attrs and any securityQuals
updates. The rest of this is unnecessary, and indeed adding duplicate
subquery RTEs to the subroot is *wrong*. As the code stood, the children
of that partition ended up with two sets of copied subquery RTEs, confusing
matters greatly. Even more hilarity ensued if all of the children got
excluded by constraint exclusion, so that the extra RTEs didn't make it
back into the parent rtable.
Per fuzz testing by Andreas Seltenreich. Back-patch to v11 where this
got broken (by commit 0a480502b, it looks like).
Peter Geoghegan [Fri, 10 Aug 2018 20:01:33 +0000 (13:01 -0700)]
Handle parallel index builds on mapped relations.
Commit 9da0cc35284, which introduced parallel CREATE INDEX, failed to
propagate relmapper.c backend local cache state to parallel worker
processes. This could result in parallel index builds against mapped
catalog relations where the leader process (participating as a worker)
scans the new, pristine relfilenode, while worker processes scan the
obsolescent relfilenode. When this happened, the final index structure
was typically not consistent with the owning table's structure. The
final index structure could contain entries formed from both heap
relfilenodes. Only rebuilds on mapped catalog relations that occur as
part of a VACUUM FULL or CLUSTER could become corrupt in practice, since
their mapped relation relfilenode swap is what allows the inconsistency
to arise.
On master, fix the problem by propagating the required relmapper.c
backend state as part of standard parallel initialization (Cf. commit 29d58fd3). On v11, simply disallow builds against mapped catalog
relations by deeming them parallel unsafe.
Author: Peter Geoghegan Reported-By: "death lock" Reviewed-By: Tom Lane, Amit Kapila
Bug: #15309
Discussion: https://postgr.es/m/153329671686.1405.18298309097348420351@wrigleys.postgresql.org
Backpatch: 11-, where parallel CREATE INDEX was introduced.
Add missing documentation for argument of amcostestimate()
5262f7a4fc44 have introduced parallel index scan. In order to estimate the
number of parallel workers, it adds extra argument to amcostestimate() index
access method API function. However, this extra argument was missed in the
documentation. This commit fixes that.
Discussion: https://postgr.es/m/4128fdb4-8b63-2e05-38f6-3125f8c27263%40lab.ntt.co.jp
Author: Tatsuro Yamada, Alexander Korotkov
Backpatch-through: 10
Tom Lane [Thu, 9 Aug 2018 19:21:09 +0000 (15:21 -0400)]
Document need to clear MAKELEVEL when invoking PG build from a makefile.
Since commit 3b8f6e75f, failure to do this would lead to
submake-generated-headers not doing anything, so that references to
generated or symlinked headers would fail. Previous to that, the
omission only led to temp-install not doing anything, which apparently
affects many fewer people (doesn't anybody use "make check" in their
build rules??). Hence, backpatch to v11 but not further.
Per complaints from Christoph Berg, Jakob Egger, and others.
Bruce Momjian [Thu, 9 Aug 2018 14:13:15 +0000 (10:13 -0400)]
docs: Only first instance of a PREPARE parameter sets data type
If the first reference to $1 is "($1 = col) or ($1 is null)", the data
type can be determined, but not for "($1 is null) or ($1 = col)". This
change documents this.
Michael Paquier [Thu, 9 Aug 2018 07:40:27 +0000 (09:40 +0200)]
Restrict access to reindex of shared catalogs for non-privileged users
A database owner running a database-level REINDEX has the possibility to
also do the operation on shared system catalogs without being an owner
of them, which allows him to block resources it should not have access
to. The same goes for a schema owner. For example, PostgreSQL would go
unresponsive and even block authentication if a lock is waited for
pg_authid. This commit makes sure that a user running a REINDEX SYSTEM,
DATABASE or SCHEMA only works on the following relations:
- The user is a superuser
- The user is the table owner
- The user is the database/schema owner, only if the relation worked on
is not shared.
Robert has worded most the documentation changes, and I have coded the
core part.
Reported-by: Lloyd Albin, Jeremy Schneider
Author: Michael Paquier, Robert Haas
Reviewed by: Nathan Bossart, Kyotaro Horiguchi
Discussion: https://postgr.es/m/152512087100.19803.12733865831237526317@wrigleys.postgresql.org
Discussion: https://postgr.es/m/20180805211059.GA2185@paquier.xyz
Backpatch-through: 11- as the current behavior has been around for a
very long time and could be disruptive for already released branches.
Tom Lane [Thu, 9 Aug 2018 00:02:10 +0000 (20:02 -0400)]
Remove bogus Assert in make_partitionedrel_pruneinfo().
This Assert thought that a given rel couldn't be both leaf and
non-leaf, but it turns out that in some unusual plan trees
that's wrong, so remove it.
The lack of testing for cases like that is quite concerning ---
there is little reason for confidence that there aren't other
bugs in the area. But developing a stable test case seems
rather difficult, and in any case we don't need this Assert.
Peter Geoghegan [Wed, 8 Aug 2018 19:56:23 +0000 (12:56 -0700)]
Doc: Correct description of amcheck example query.
The amcheck documentation incorrectly claimed that its example query
verifies every catalog index in the database. In fact, the query only
verifies the 10 largest indexes (as determined by pg_class.relpages).
Adjust the description accordingly.
Backpatch: 10-, where contrib/amcheck was introduced.
Don't run atexit callbacks in quickdie signal handlers.
exit() is not async-signal safe. Even if the libc implementation is, 3rd
party libraries might have installed unsafe atexit() callbacks. After
receiving SIGQUIT, we really just want to exit as quickly as possible, so
we don't really want to run the atexit() callbacks anyway.
The original report by Jimmy Yih was a self-deadlock in startup_die().
However, this patch doesn't address that scenario; the signal handling
while waiting for the startup packet is more complicated. But at least this
alleviates similar problems in the SIGQUIT handlers, like that reported
by Asim R P later in the same thread.
Tom Lane [Wed, 8 Aug 2018 15:44:50 +0000 (11:44 -0400)]
Match RelOptInfos by relids not pointer equality.
Commit 1c2cb2744 added some code that tried to detect whether two
RelOptInfos were the "same" rel by pointer comparison; but it turns
out that inheritance_planner breaks that, through its shenanigans
with copying some relations forward into new subproblems. Compare
relid sets instead. Add a regression test case to exercise this
area.
Problem reported by Rushabh Lathia; diagnosis and fix by Amit Langote,
modified a bit by me.
Tom Lane [Tue, 7 Aug 2018 20:32:50 +0000 (16:32 -0400)]
Don't record FDW user mappings as members of extensions.
CreateUserMapping has a recordDependencyOnCurrentExtension call that's
been there since extensions were introduced (very possibly my fault).
However, there's no support anywhere else for user mappings as members
of extensions, nor are they listed as a possible member object type in
the documentation. Nor does it really seem like a good idea for user
mappings to belong to extensions when roles don't. Hence, remove the
bogus call.
(As we saw in bug #15310, the lack of any pg_dump support for this case
ensures that any such membership record would silently disappear during
pg_upgrade. So there's probably no need for us to do anything else
about cleaning up after this mistake.)
Tom Lane [Tue, 7 Aug 2018 20:00:44 +0000 (16:00 -0400)]
Fix incorrect initialization of BackendActivityBuffer.
Since commit c8e8b5a6e, this has been zeroed out using the wrong length.
In practice the length would always be too small, leading to not zeroing
the whole buffer rather than clobbering additional memory; and that's
pretty harmless, both because shmem would likely start out as zeroes
and because we'd reinitialize any given entry before use. Still,
it's bogus, so fix it.
Tom Lane [Tue, 7 Aug 2018 19:43:48 +0000 (15:43 -0400)]
Fix pg_upgrade to handle event triggers in extensions correctly.
pg_dump with --binary-upgrade must emit ALTER EXTENSION ADD commands
for all objects that are members of extensions. It forgot to do so for
event triggers, as per bug #15310 from Nick Barnes. Back-patch to 9.3
where event triggers were introduced.
Tom Lane [Tue, 7 Aug 2018 17:13:42 +0000 (13:13 -0400)]
Ensure pg_dump_sort.c sorts null vs non-null namespace consistently.
The original coding here (which is, I believe, my fault) supposed that
it didn't need to concern itself with the possibility that one object
of a given type-priority has a namespace while another doesn't. But
that's not reliably true anymore, if it ever was; and if it does happen
then it's possible that DOTypeNameCompare returns self-inconsistent
comparison results. That leads to unspecified behavior in qsort()
and a resultant weird output order from pg_dump.
This should end up being only a cosmetic problem, because any ordering
constraints that actually matter should be enforced by the later
dependency-based sort. Still, it's a bug, so back-patch.
Report and fix by Jacob Champion, though I editorialized on his
patch to the extent of making NULL sort after non-NULL, for consistency
with our usual sorting definitions.
Tom Lane [Mon, 6 Aug 2018 14:53:35 +0000 (10:53 -0400)]
Fix failure to reset libpq's state fully between connection attempts.
The logic in PQconnectPoll() did not take care to ensure that all of
a PGconn's internal state variables were reset before trying a new
connection attempt. If we got far enough in the connection sequence
to have changed any of these variables, and then decided to try a new
server address or server name, the new connection might be completed
with some state that really only applied to the failed connection.
While this has assorted bad consequences, the only one that is clearly
a security issue is that password_needed didn't get reset, so that
if the first server asked for a password and the second didn't,
PQconnectionUsedPassword() would return an incorrect result. This
could be leveraged by unprivileged users of dblink or postgres_fdw
to allow them to use server-side login credentials that they should
not be able to use.
Other notable problems include the possibility of forcing a v2-protocol
connection to a server capable of supporting v3, or overriding
"sslmode=prefer" to cause a non-encrypted connection to a server that
would have accepted an encrypted one. Those are certainly bugs but
it's harder to paint them as security problems in themselves. However,
forcing a v2-protocol connection could result in libpq having a wrong
idea of the server's standard_conforming_strings setting, which opens
the door to SQL-injection attacks. The extent to which that's actually
a problem, given the prerequisite that the attacker needs control of
the client's connection parameters, is unclear.
These problems have existed for a long time, but became more easily
exploitable in v10, both because it introduced easy ways to force libpq
to abandon a connection attempt at a late stage and then try another one
(rather than just giving up), and because it provided an easy way to
specify multiple target hosts.
Fix by rearranging PQconnectPoll's state machine to provide centralized
places to reset state properly when moving to a new target host or when
dropping and retrying a connection to the same host.
Tom Lane, reviewed by Noah Misch. Our thanks to Andrew Krasichkov
for finding and reporting the problem.
There are some problems with the tls-unique channel binding type. It's not
supported by all SSL libraries, and strictly speaking it's not defined for
TLS 1.3 at all, even though at least in OpenSSL, the functions used for it
still seem to work with TLS 1.3 connections. And since we had no
mechanism to negotiate what channel binding type to use, there would be
awkward interoperability issues if a server only supported some channel
binding types. tls-server-end-point seems feasible to support with any SSL
library, so let's just stick to that.
This removes the scram_channel_binding libpq option altogether, since there
is now only one supported channel binding type.
This also removes all the channel binding tests from the SSL test suite.
They were really just testing the scram_channel_binding option, which
is now gone. Channel binding is used if both client and server support it,
so it is used in the existing tests. It would be good to have some tests
specifically for channel binding, to make sure it really is used, and the
different combinations of a client and a server that support or doesn't
support it. The current set of settings we have make it hard to write such
tests, but I did test those things manually, by disabling
HAVE_BE_TLS_GET_CERTIFICATE_HASH and/or
HAVE_PGTLS_GET_PEER_CERTIFICATE_HASH.
I also removed the SCRAM_CHANNEL_BINDING_TLS_END_POINT constant. This is a
matter of taste, but IMO it's more readable to just use the
"tls-server-end-point" string.
Refactor the checks on whether the SSL library supports the functions
needed for tls-server-end-point channel binding. Now the server won't
advertise, and the client won't choose, the SCRAM-SHA-256-PLUS variant, if
compiled with an OpenSSL version too old to support it.
In the passing, add some sanity checks to check that the chosen SASL
mechanism, SCRAM-SHA-256 or SCRAM-SHA-256-PLUS, matches whether the SCRAM
exchange used channel binding or not. For example, if the client selects
the non-channel-binding variant SCRAM-SHA-256, but in the SCRAM message
uses channel binding anyway. It's harmless from a security point of view,
I believe, and I'm not sure if there are some other conditions that would
cause the connection to fail, but it seems better to be strict about these
things and check explicitly.
Tom Lane [Sun, 5 Aug 2018 03:49:53 +0000 (23:49 -0400)]
Update version 11 release notes.
Remove description of commit 1944cdc98, which has now been back-patched
so it's not relevant to v11 any longer. Add descriptions of other
recent commits that seemed worth mentioning.
I marked the update as stopping at 2018-07-30, because it's unclear
whether d06eebce5 will be allowed to stay in v11, and I didn't feel like
putting effort into writing a description of it yet. If it does stay,
I think it will deserve mention in the Source Code section.
Tom Lane [Sat, 4 Aug 2018 23:38:58 +0000 (19:38 -0400)]
Fix INSERT ON CONFLICT UPDATE through a view that isn't just SELECT *.
When expanding an updatable view that is an INSERT's target, the rewriter
failed to rewrite Vars in the ON CONFLICT UPDATE clause. This accidentally
worked if the view was just "SELECT * FROM ...", as the transformation
would be a no-op in that case. With more complicated view targetlists,
this omission would often lead to "attribute ... has the wrong type" errors
or even crashes, as reported by Mario De Frutos Dieguez.
Fix by adding code to rewriteTargetView to fix up the data structure
correctly. The easiest way to update the exclRelTlist list is to rebuild
it from scratch looking at the new target relation, so factor the code
for that out of transformOnConflictClause to make it sharable.
In passing, avoid duplicate permissions checks against the EXCLUDED
pseudo-relation, and prevent useless view expansion of that relation's
dummy RTE. The latter is only known to happen (after this patch) in cases
where the query would fail later due to not having any INSTEAD OF triggers
for the view. But by exactly that token, it would create an unintended
and very poorly tested state of the query data structure, so it seems like
a good idea to prevent it from happening at all.
This has been broken since ON CONFLICT was introduced, so back-patch
to 9.5.
Dean Rasheed, based on an earlier patch by Amit Langote;
comment-kibitzing and back-patching by me
Michael Paquier [Sat, 4 Aug 2018 20:31:56 +0000 (05:31 +0900)]
Reset properly errno before calling write()
6cb3372 enforces errno to ENOSPC when less bytes than what is expected
have been written when it is unset, though it forgot to properly reset
errno before doing a system call to write(), causing errno to
potentially come from a previous system call.
Reported-by: Tom Lane
Author: Michael Paquier Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/31797.1533326676@sss.pgh.pa.us
Noah Misch [Sat, 4 Aug 2018 03:53:25 +0000 (20:53 -0700)]
Make "kerberos" test suite independent of "localhost" name resolution.
This suite malfunctioned if the canonical name of "localhost" was
something other than "localhost", such as "localhost.localdomain". Use
hostaddr=127.0.0.1 and a fictitious host=, so the resolver's answers for
"localhost" don't affect the outcome. Back-patch to v11, which
introduced this test suite.
Peter Geoghegan [Fri, 3 Aug 2018 21:45:02 +0000 (14:45 -0700)]
Add table relcache invalidation to index builds.
It's necessary to make sure that owning tables have a relcache
invalidation prior to advancing the command counter to make
newly-entered catalog tuples for the index visible. inval.c must be
able to maintain the consistency of the local caches in the event of
transaction abort. There is usually only a problem when CREATE INDEX
transactions abort, since there is a generic invalidation once we reach
index_update_stats().
This bug is of long standing. Problems were made much more likely by
the addition of parallel CREATE INDEX (commit 9da0cc35284), but it is
strongly suspected that similar problems can be triggered without
involving plan_create_index_workers(). (plan_create_index_workers()
triggers a relcache build or rebuild, which previously only happened in
rare edge cases.)
Author: Peter Geoghegan Reported-By: Luca Ferrari Diagnosed-By: Andres Freund Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAKoxK+5fVodiCtMsXKV_1YAKXbzwSfp7DgDqUmcUAzeAhf=HEQ@mail.gmail.com
Backpatch: 9.3-
Tom Lane [Fri, 3 Aug 2018 16:20:47 +0000 (12:20 -0400)]
Remove no-longer-appropriate special case in psql's \conninfo code.
\conninfo prints the results of PQhost() and some other libpq functions.
It used to override the PQhost() result with the hostaddr parameter if
that'd been given, but that's unhelpful when multiple hosts were listed
in the connection string. Furthermore, it seems unnecessary in the wake
of commit 1944cdc98, since PQhost does any useful substitution itself.
So let's just remove the extra code and print PQhost()'s result without
any editorialization.
projects / postgresql / log