Oliver Stannard [Thu, 17 Oct 2019 09:58:57 +0000 (09:58 +0000)]
Reland: Dead Virtual Function Elimination
Remove dead virtual functions from vtables with
replaceNonMetadataUsesWith, so that CGProfile metadata gets cleaned up
correctly.
Original commit message:
Currently, it is hard for the compiler to remove unused C++ virtual
functions, because they are all referenced from vtables, which are referenced
by constructors. This means that if the constructor is called from any live
code, then we keep every virtual function in the final link, even if there
are no call sites which can use it.
This patch allows unused virtual functions to be removed during LTO (and
regular compilation in limited circumstances) by using type metadata to match
virtual function call sites to the vtable slots they might load from. This
information can then be used in the global dead code elimination pass instead
of the references from vtables to virtual functions, to more accurately
determine which functions are reachable.
To make this transformation safe, I have changed clang's code-generation to
always load virtual function pointers using the llvm.type.checked.load
intrinsic, instead of regular load instructions. I originally tried writing
this using clang's existing code-generation, which uses the llvm.type.test
and llvm.assume intrinsics after doing a normal load. However, it is possible
for optimisations to obscure the relationship between the GEP, load and
llvm.type.test, causing GlobalDCE to fail to find virtual function call
sites.
The existing linkage and visibility types don't accurately describe the scope
in which a virtual call could be made which uses a given vtable. This is
wider than the visibility of the type itself, because a virtual function call
could be made using a more-visible base class. I've added a new
!vcall_visibility metadata type to represent this, described in
TypeMetadata.rst. The internalization pass and libLTO have been updated to
change this metadata when linking is performed.
This doesn't currently work with ThinLTO, because it needs to see every call
to llvm.type.checked.load in the linkage unit. It might be possible to
extend this optimisation to be able to use the ThinLTO summary, as was done
for devirtualization, but until then that combination is rejected in the
clang driver.
To test this, I've written a fuzzer which generates random C++ programs with
complex class inheritance graphs, and virtual functions called through object
and function pointers of different types. The programs are spread across
multiple translation units and DSOs to test the different visibility
restrictions.
I've also tried doing bootstrap builds of LLVM to test this. This isn't
ideal, because only classes in anonymous namespaces can be optimised with
-fvisibility=default, and some parts of LLVM (plugins and bugpoint) do not
work correctly with -fvisibility=hidden. However, there are only 12 test
failures when building with -fvisibility=hidden (and an unmodified compiler),
and this change does not cause any new failures for either value of
-fvisibility.
On the 7 C++ sub-benchmarks of SPEC2006, this gives a geomean code-size
reduction of ~6%, over a baseline compiled with "-O2 -flto
-fvisibility=hidden -fwhole-program-vtables". The best cases are reductions
of ~14% in 450.soplex and 483.xalancbmk, and there are no code size
increases.
I've also run this on a set of 8 mbed-os examples compiled for Armv7M, which
show a geomean size reduction of ~3%, again with no size increases.
I had hoped that this would have no effect on performance, which would allow
it to awlays be enabled (when using -fwhole-program-vtables). However, the
changes in clang to use the llvm.type.checked.load intrinsic are causing ~1%
performance regression in the C++ parts of SPEC2006. It should be possible to
recover some of this perf loss by teaching optimisations about the
llvm.type.checked.load intrinsic, which would make it worth turning this on
by default (though it's still dependent on -fwhole-program-vtables).
Mikhail Maltsev [Thu, 17 Oct 2019 08:59:06 +0000 (08:59 +0000)]
[Analysis] Don't assume that unsigned overflow can't happen in EmitGEPOffset (PR42699)
Summary:
Currently when computing a GEP offset using the function EmitGEPOffset
for the following instruction
getelementptr inbounds i32, i32* %p, i64 %offs
we get
mul nuw i64 %offs, 4
Unfortunately we cannot assume that unsigned wrapping won't happen
here because %offs is allowed to be negative.
Making such assumptions can lead to miscompilations: see the new test
test24_neg_offs in InstCombine/icmp.ll. Without the patch InstCombine
would generate the following comparison:
Hans Wennborg [Thu, 17 Oct 2019 08:52:29 +0000 (08:52 +0000)]
Revert r374931 "[llvm-objdump] Use a counter for llvm-objdump -h instead of the section index."
This broke llvm-objdump in 32-bit builds, see e.g.
http://lab.llvm.org:8011/builders/clang-cmake-armv7-quick/builds/10925
> Summary:
> When listing the index in `llvm-objdump -h`, use a zero-based counter instead of the actual section index (e.g. shdr->sh_index for ELF).
>
> While this is effectively a noop for now (except one unit test for XCOFF), the index values will change in a future patch that filters certain sections out (e.g. symbol tables). See D68669 for more context. Note: the test case in `test/tools/llvm-objdump/X86/section-index.s` already covers the case of incrementing the section index counter when sections are skipped.
>
> Reviewers: grimar, jhenderson, espindola
>
> Reviewed By: grimar
>
> Subscribers: emaste, sbc100, arichardson, aheejin, arphaman, seiya, llvm-commits, MaskRay
>
> Tags: #llvm
>
> Differential Revision: https://reviews.llvm.org/D68848
James Molloy [Thu, 17 Oct 2019 08:34:29 +0000 (08:34 +0000)]
[DFAPacketizer] Use DFAEmitter. NFC.
Summary:
This is a NFC change that removes the NFA->DFA construction and emission logic from DFAPacketizerEmitter and instead uses the generic DFAEmitter logic. This allows DFAPacketizer to use the Automaton class from Support and remove a bunch of logic there too.
After this patch, DFAPacketizer is mostly logic for grepping Itineraries and collecting functional units, with no state machine logic. This will allow us to modernize by removing the 16-functional-unit limit and supporting non-itinerary functional units. This is all for followup patches.
[Alignment][NFC] Use Align for TargetFrameLowering/Subtarget
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Daniel Sanders [Thu, 17 Oct 2019 00:37:04 +0000 (00:37 +0000)]
[gicombiner] Add the run-time rule disable option
Summary:
Each generated helper can be configured to generate an option that disables
rules in that helper. This can be used to bisect rulesets.
The disable bits are stored in a SparseVector as this is very cheap for the
common case where nothing is disabled. It gets more expensive the more rules
are disabled but you're generally doing that for debug purposes where
performance is less of a concern.
Daniel Sanders [Wed, 16 Oct 2019 23:53:35 +0000 (23:53 +0000)]
[gicombiner] Hoist pure C++ combine into the tablegen definition
Summary:
This is just moving the existing C++ code around and will be NFC w.r.t
AArch64. Renamed 'CombineBr' to something more descriptive
('ElideByByInvertingCond') at the same time.
The remaining combines in AArch64PreLegalizeCombiner require features that
aren't implemented at this point and will be hoisted as they are added.
The patch does not work on Windows due to `\` in filenames being interpreted as escaping rather than literal path separators when used by lld linker scripts.
Jordan Rupprecht [Wed, 16 Oct 2019 22:31:16 +0000 (22:31 +0000)]
[support] GlobPattern: add support for `\` and `[!...]`, and allow `]` in more places
Summary: Update GlobPattern in libSupport to handle a few more cases. It does not fully match the `fnmatch` used by GNU objcopy since named character classes (e.g. `[[:digit:]]`) are not supported, but this should support most existing use cases (mostly just `*` is what's used anyway).
This will be used to implement the `--wildcard` flag in llvm-objcopy to be more compatible with GNU objcopy.
This is split off of D66613 to land the libSupport changes separately. The llvm-objcopy part will land soon.
Alina Sbirlea [Wed, 16 Oct 2019 22:23:20 +0000 (22:23 +0000)]
[Utils] Cleanup similar cases to MergeBlockIntoPredecessor.
Summary:
There are two cases where a block is merged into its predecessor and the
MergeBlockIntoPredecessor API is not used. Update the API so it can be
reused in the other cases, in order to avoid code duplication.
Julian Lettner [Wed, 16 Oct 2019 21:53:20 +0000 (21:53 +0000)]
[lit] Small refactoring and cleanups in main.py
* Remove outdated precautions for Python versions < 2.7
* Remove dead code related to `maxIndividualTestTime` option
* Move printing of test and result summary out of main into its own
function
[dsymutil] Print warning/error for unknown/missing arguments.
After changing dsymutil to use libOption, we lost error reporting for
missing required arguments (input files). Additionally, we stopped
complaining about unknown arguments. This patch fixes both and adds a
test.
Shoaib Meenai [Wed, 16 Oct 2019 21:41:05 +0000 (21:41 +0000)]
[AArch64] Fix offset calculation
r374772 changed Offset to be an int64_t but left NewOffset as an int.
Scale is unsigned, so in the calculation `Offset - NewOffset * Scale`,
`NewOffset * Scale` was promoted to unsigned and was then zero-extended
to 64 bits, leading to an incorrect computation which manifested as an
out-of-memory when building the Swift standard library for Android
aarch64. Promote NewOffset to int64_t to fix this, and promote
EmittableOffset as well, since its one user passes it to a function
which takes an int64_t anyway.
Test case based on a suggestion by Sander de Smalen!
Philip Reames [Wed, 16 Oct 2019 19:58:26 +0000 (19:58 +0000)]
[IndVars] Fix a miscompile in off-by-default loop predication implementation
The problem is that we can have two loop exits, 'a' and 'b', where 'a' and 'b' would exit at the same iteration, 'a' precedes 'b' along some path, and 'b' is predicated while 'a' is not. In this case (see the previously submitted test case), we causing the loop to exit through 'b' whereas it should have exited through 'a'.
This only applies to loop exits where the exit counts are not provably inequal, but that isn't as much of a restriction as it appears. If we could order the exit counts, we'd have already removed one of the two exits. In theory, we might be able to prove inequality w/o ordering, but I didn't really explore that piece. Instead, I went for the obvious restriction and ensured we didn't predicate exits following non-predicateable exits.
Credit goes to Evgeny Brevnov for figuring out the problematic case. Fuzzing probably also found it (failures seen), but due to some silly infrastructure problems I hadn't gotten to the results before Evgeny hand reduced it from a benchmark (he manually enabled the transform). Once this is fixed, I'll try to filter through the fuzzer failures to see if there's anything additional lurking.
Jordan Rupprecht [Wed, 16 Oct 2019 18:39:52 +0000 (18:39 +0000)]
[llvm-ar] Implement the V modifier as an alias for --version
Summary: Also update the help modifier (h) so that it works as a modifier and not just as a standalone `h`. For example, `llvm-ar h` prints the help message, but `llvm-ar xh` currently prints `unknown option h`.
Sanjay Patel [Wed, 16 Oct 2019 18:06:24 +0000 (18:06 +0000)]
[SLP] avoid reduction transform on patterns that the backend can load-combine (2nd try)
The 1st attempt at this modified the cost model in a bad way to avoid the vectorization,
but that caused problems for other users (the loop vectorizer) of the cost model.
I don't see an ideal solution to these 2 related, potentially large, perf regressions:
https://bugs.llvm.org/show_bug.cgi?id=42708
https://bugs.llvm.org/show_bug.cgi?id=43146
We decided that load combining was unsuitable for IR because it could obscure other
optimizations in IR. So we removed the LoadCombiner pass and deferred to the backend.
Therefore, preventing SLP from destroying load combine opportunities requires that it
recognizes patterns that could be combined later, but not do the optimization itself (
it's not a vector combine anyway, so it's probably out-of-scope for SLP).
Here, we add a cost-independent bailout with a conservative pattern match for a
multi-instruction sequence that can probably be reduced later.
In the x86 tests shown (and discussed in more detail in the bug reports), SDAG combining
will produce a single instruction on these tests like:
movbe rax, qword ptr [rdi]
or:
mov rax, qword ptr [rdi]
Not some (half) vector monstrosity as we currently do using SLP:
Jason Liu [Wed, 16 Oct 2019 17:36:31 +0000 (17:36 +0000)]
[NFC][XCOFF][AIX] Rename ControlSections to CsectGroup
The name of ControlSections is not expressive enough to convey what they really are.
CsectGroup can better communicate the concept of grouping csects together since they have similar property.
Joel E. Denny [Wed, 16 Oct 2019 17:21:57 +0000 (17:21 +0000)]
[lit] Fix internal diff's --strip-trailing-cr and use it
Using GNU diff, `--strip-trailing-cr` removes a `\r` appearing before
a `\n` at the end of a line. Without this patch, lit's internal diff
only removes `\r` if it appears as the last character. That seems
useless. This patch fixes that.
This patch also adds `--strip-trailing-cr` to some tests that fail on
Windows bots when D68664 is applied. Based on what I see in the bot
logs, I think the following is happening. In each test there, lit
diff is comparing a file with `\r\n` line endings to a file with `\n`
line endings. Without D68664, lit diff reads those files in text
mode, which in Windows causes `\r\n` to be replaced with `\n`.
However, with D68664, lit diff reads the files in binary mode instead
and thus reports that every line is different, just as GNU diff does
(at least under Ubuntu). Adding `--strip-trailing-cr` to those tests
restores the previous behavior while permitting the behavior of lit
diff to be more like GNU diff.
Joel E. Denny [Wed, 16 Oct 2019 17:21:24 +0000 (17:21 +0000)]
[lit] Clean up internal diff's encoding handling
As suggested by rnk at D67643#1673043, instead of reading files
multiple times until an appropriate encoding is found, read them once
as binary, and then try to decode what was read.
For Python >= 3.5, don't fail when attempting to decode the
`diff_bytes` output in order to print it.
Avoid failures for Python 2.7 used on some Windows bots by
transforming diff output with `lit.util.to_string` before writing it
to stdout.
Jiong Wang [Wed, 16 Oct 2019 15:27:59 +0000 (15:27 +0000)]
bpf: fix wrong truncation elimination when there is back-edge/loop
Currently, BPF backend is doing truncation elimination. If one truncation
is performed on a value defined by narrow loads, then it could be redundant
given BPF loads zero extend the destination register implicitly.
When the definition of the truncated value is a merging value (PHI node)
that could come from different code paths, then checks need to be done on
all possible code paths.
Above described optimization was introduced as r306685, however it doesn't
work when there is back-edge, for example when loop is used inside BPF
code.
For example for the following code, a zero-extended value should be stored
into b[i], but the "and reg, 0xffff" is wrongly eliminated which then
generates corrupted data.
void cal1(unsigned short *a, unsigned long *b, unsigned int k)
{
unsigned short e;
e = *a;
for (unsigned int i = 0; i < k; i++) {
b[i] = e;
e = ~e;
}
}
The reason is r306685 was trying to do the PHI node checks inside isel
DAG2DAG phase, and the checks are done on MachineInstr. This is actually
wrong, because MachineInstr is being built during isel phase and the
associated information is not completed yet. A quick search shows none
target other than BPF is access MachineInstr info during isel phase.
For an PHI node, when you reached it during isel phase, it may have all
predecessors linked, but not successors. It seems successors are linked to
PHI node only when doing SelectionDAGISel::FinishBasicBlock and this
happens later than PreprocessISelDAG hook.
Previously, BPF program doesn't allow loop, there is probably the reason
why this bug was not exposed.
This patch therefore fixes the bug by the following approach:
- The existing truncation elimination code and the associated
"load_to_vreg_" records are removed.
- Instead, implement truncation elimination using MachineSSA pass, this
is where all information are built, and keep the pass together with other
similar peephole optimizations inside BPFMIPeephole.cpp. Redundant move
elimination logic is updated accordingly.
- Unit testcase included + no compilation errors for kernel BPF selftest.
Patch Review
===
Patch was sent to and reviewed by BPF community at:
https://lore.kernel.org/bpf
Reported-by: David Beckett <david.beckett@netronome.com> Reviewed-by: Yonghong Song <yhs@fb.com> Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375007 91177308-0d34-0410-b5e6-96231b3b80d8
Luis Marques [Wed, 16 Oct 2019 15:06:02 +0000 (15:06 +0000)]
[RISCV] Add MachineInstr immediate verification
Summary:
This patch implements the `TargetInstrInfo::verifyInstruction` hook for RISC-V. Currently the hook verifies the machine instruction's immediate operands, to check if the immediates are within the expected bounds. Without the hook invalid immediates are not detected except when doing assembly parsing, so they are silently emitted (including being truncated when emitting object code).
The bounds information is specified in tablegen by using the `OperandType` definition, which sets the `MCOperandInfo`'s `OperandType` field. Several RISC-V-specific immediate operand types were created, which extend the `MCInstrDesc`'s `OperandType` `enum`.
To have the hook called with `llc` pass it the `-verify-machineinstrs` option. For Clang add the cmake build config `-DLLVM_ENABLE_EXPENSIVE_CHECKS=True`, or temporarily patch `TargetPassConfig::addVerifyPass`.
Review concerns:
- The patch adds immediate operand type checks that cover at least the base ISA. There are several other operand types for the C extension and one type for the F/D extensions that were left out of this initial patch because they introduced further design concerns that I felt were best evaluated separately.
- Invalid register classes (e.g. passing a GPR register where a GPRC is expected) are already caught, so were not included.
- This design makes the more abstract `MachineInstr` verification depend on MC layer definitions, which arguably is not the cleanest design, but is in line with how things are done in other parts of the target and LLVM in general.
- There is some duplication of logic already present in the `MCOperandPredicate`s. Since the `MachineInstr` and `MCInstr` notions of immediates are fundamentally different, this is currently necessary.
David Stuttard [Wed, 16 Oct 2019 14:37:39 +0000 (14:37 +0000)]
[AMDGPU] Fix-up cases where writelane has 2 SGPR operands
Summary:
Even though writelane doesn't have the same constraints as other valu
instructions it still can't violate the >1 SGPR operand constraint
Due to later register propagation (e.g. fixing up vgpr operands via
readfirstlane) changing writelane to only have a single SGPR is tricky.
This implementation puts a new check after SIFixSGPRCopies that prevents
multiple SGPRs being used in any writelane instructions.
The algorithm used is to check for trivial copy prop of suitable constants into
one of the SGPR operands and perform that if possible. If this isn't possible
put an explicit copy of Src1 SGPR into M0 and use that instead (this is
allowable for writelane as the constraint is for SGPR read-port and not
constant-bus access).
Piotr Sobczak [Wed, 16 Oct 2019 11:14:01 +0000 (11:14 +0000)]
[InstCombine][AMDGPU] Fix crash with v3i16/v3f16 buffer intrinsics
Summary:
This is something of a workaround to avoid a crash later on in type
legalizer (WidenVectorResult()).
Also added some f16 tests, including a non-working v3f16 case with
a FIXME.
Mikhail Maltsev [Wed, 16 Oct 2019 10:40:57 +0000 (10:40 +0000)]
[ARM] Add a register class for GPR pairs without SP and use it. NFCI
Summary:
Currently Thumb2InstrInfo.cpp uses a register class which is
auto-generated by tablegen. Such approach is fragile because
auto-generated classes might change when other register classes are
added. For example, before https://reviews.llvm.org/D62667
we were using GPRPair_with_gsub_1_in_rGPRRegClass, but had to
change it to GPRPair_with_gsub_1_in_GPRwithAPSRnospRegClass
because the former class stopped being generated (this did not change
the functionality though).
This patch adds a register class consisting of even-odd GPR register
pairs from (R0, R1) to (R10, R11), which excludes (R12, SP) and uses
it in Thumb2InstrInfo.cpp instead of
GPRPair_with_gsub_1_in_GPRwithAPSRnospRegClass.
Sam Parker [Wed, 16 Oct 2019 09:37:03 +0000 (09:37 +0000)]
[ARM][ParallelDSP] Change smlad insertion order
Instead of inserting everything after the 'root' of the reduction,
insert all instructions as close to their operands as possible. This
can help reduce register pressure.
[NFC] Replace a linked list in LiveDebugVariables pass with a DenseMap
In LiveDebugVariables.cpp:
Prior to this patch, UserValues were grouped into linked list chains. Each
chain was the union of two sets: { A: Matching Source variable } or
{ B: Matching virtual register }. A ptr to the heads (or 'leaders')
of each of these chains were kept in a map with the { Source variable } used
as the key (set A predicate) and another with { Virtual register } as key
(set B predicate).
There was a search through the chains in the function getUserValue looking for
UserValues with matching { Source variable, Complex expression, Inlined-at
location }. Essentially searching for a subset of A through two interleaved
linked lists of set A and B. Importantly, by design, the subset will only
contain one or zero elements here. That is to say a UserValue can be uniquely
identified by the tuple { Source variable, Complex expression, Inlined-at
location } if it exists.
This patch removes the linked list and instead uses a DenseMap to map
the tuple { Source variable, Complex expression, Inlined-at location }
to UserValue ptrs so that the getUserValue search predicate is this map key.
The virtual register map now maps a vreg to a SmallVector<UserVal *> so that
set B is still available for quick searches.
Craig Topper [Wed, 16 Oct 2019 03:29:24 +0000 (03:29 +0000)]
[LegalizeTypes] Don't use PromoteTargetBoolean in WidenVecOp_SETCC.
Similar to r374970, but I don't have a test for this.
PromoteTargetBoolean is intended to be use for legalizing an
operand that needs to be promoted. It picks its type based on
the return from getSetccResultType and is intended to be used
when we have freedom to pick the new type. But the return type
we need for WidenVecOp_SETCC is completely determined by the
type of the input node.
Craig Topper [Wed, 16 Oct 2019 02:50:04 +0000 (02:50 +0000)]
[LegalizeTypes] Don't call PromoteTargetBoolean from SplitVecOp_VSETCC.
PromoteTargetBoolean calls getSetccResultType to get the return
type. But we were passing it the setcc result type rather than the
setcc input type. This causes an issue on X86 with avx512vl where
the setcc result type for vXf16 vectors is vXi16 while the
result type for vXi16 vectors is vXi1.
There's really no guarantee that getSetccResultType is the type
we need here. So now we just grab the extend type from
getExtendForContent and extend to the original result VT of the
node we're splitting.
[dsymutil] Support and relocate base address selection entries for debug_loc
Since r374600 clang emits base address selection entries. Currently
dsymutil does not support these entries and incorrectly interprets them
as location list entries.
This patch adds support for base address selection entries in dsymutil
and makes sure they are relocated correctly.
[Reland][VirtualFileSystem] Support virtual working directory in the RedirectingFS
Before this patch, changing the working directory of the RedirectingFS
would just forward to its external file system. This prevented us from
having a working directory that only existed in the VFS mapping.
This patch adds support for a virtual working directory in the
RedirectingFileSystem. It now keeps track of its own WD in addition to
updating the WD of the external file system. This ensures that we can
still fall through for relative paths.
This change was originally motivated by the reproducer infrastructure in
LLDB where we want to deal transparently with relative paths.
Lang Hames [Tue, 15 Oct 2019 21:41:12 +0000 (21:41 +0000)]
[Orc] Add a method for ObjectLinkingLayer to return ownership of object buffers.
RTDyldObjectLinkingLayer allowed clients to register a NotifyEmitted function to
reclaim ownership of object buffers once they had been linked. This patch adds
similar functionality to ObjectLinkingLayer: Clients can now optionally call the
ObjectLinkingLayer::setReturnObjectBuffer method to register a function that
will be called when discarding object buffers. If set, this function will be
called to return ownership of the object regardless of whether the link
succeeded or failed.
Use cases for this function include debug dumping (it provides a way to dump
all objects linked into JIT'd code) and object re-use (e.g. storing an
object in a cache).
Lang Hames [Tue, 15 Oct 2019 21:06:57 +0000 (21:06 +0000)]
[JITLink] Switch to slab allocation for InProcessMemoryManager, re-enable test.
InProcessMemoryManager used to make separate memory allocation calls for each
permission level (RW, RX, RO), which could lead to target-out-of-range errors
if data and code were placed too far apart (this was the source of failures in
the JITLink/AArch64 testcase when it was first landed).
This patch updates InProcessMemoryManager to allocate a single slab which is
subdivided between text and data. This should guarantee that accesses remain
in-range provided that individual object files do not exceed 1Mb in size.
This patch also re-enables the JITLink/AArch64 testcase.
Julian Lettner [Tue, 15 Oct 2019 20:57:20 +0000 (20:57 +0000)]
[lit] Add back LitTestCase
This essentially reverts a commit [1] that removed the adaptor for
Python unittests. The code has been slightly refactored to make it more
additive: all code is contained in LitTestCase.py.
Usage sites will require a small adaption:
```
[old]
import lit.discovery
...
test_suite = lit.discovery.load_test_suite(...)
Austin Kerbow [Tue, 15 Oct 2019 19:59:45 +0000 (19:59 +0000)]
AMDGPU: Fix infinite searches in SIFixSGPRCopies
Summary:
Two conditions could lead to infinite loops when processing PHI nodes in
SIFixSGPRCopies.
The first condition involves a REG_SEQUENCE that uses registers defined by both
a PHI and a COPY.
The second condition arises when a physical register is copied to a virtual
register which is then used in a PHI node. If the same virtual register is
copied to the same physical register, the result is an endless loop.
SUMMARY:
in the xcoff, if the number of relocation entries or line number entries is
overflow(large than or equal 65535) , there will be overflow section for it.
The interpret of overflow section is different with generic section header,
the patch implement parsing the overflow section.
Thomas Lively [Tue, 15 Oct 2019 18:28:22 +0000 (18:28 +0000)]
[WebAssembly] Allow multivalue types in block signature operands
Summary:
Renames `ExprType` to the more apt `BlockType` and adds a variant for
multivalue blocks. Currently non-void blocks are only generated at the
end of functions where the block return type needs to agree with the
function return type, and that remains true for multivalue
blocks. That invariant means that the actual signature does not need
to be stored in the block signature `MachineOperand` because it can be
inferred by `WebAssemblyMCInstLower` from the return type of the
parent function. `WebAssemblyMCInstLower` continues to lower block
signature operands to immediates when possible but lowers multivalue
signatures to function type symbols. The AsmParser and Disassembler
are updated to handle multivalue block types as well.
Jordan Rupprecht [Tue, 15 Oct 2019 18:13:20 +0000 (18:13 +0000)]
[llvm-objdump] Use a counter for llvm-objdump -h instead of the section index.
Summary:
When listing the index in `llvm-objdump -h`, use a zero-based counter instead of the actual section index (e.g. shdr->sh_index for ELF).
While this is effectively a noop for now (except one unit test for XCOFF), the index values will change in a future patch that filters certain sections out (e.g. symbol tables). See D68669 for more context. Note: the test case in `test/tools/llvm-objdump/X86/section-index.s` already covers the case of incrementing the section index counter when sections are skipped.
I removed this test to unblock the ARM bots while looking into failures
(r374915), and am reinstating it now with a fix.
I believe the problem was that counter ptr address I used,
'\0\0\6\0\1\0\0\1', set the high bits of the pointer, not the low bits
like I wanted. On x86_64 this superficially looks like it tests r370826,
but it doesn't, as it would have been caught before r370826. However, on
ARM (or, 32-bit hosts more generally), I suspect the high bits were
cleared, and you get a 'valid' profile.
I verified that setting the *low* bits of the pointer does trigger the
new condition:
-// Note: The CounterPtr here is off-by-one. This should trigger a malformed profile error.
-RUN: printf '\0\0\6\0\1\0\0\1' >> %t.profraw
+// Note: The CounterPtr here is off-by-one.
+//
+// Octal '\11' is 9 in decimal: this should push CounterOffset to 1. As there are two counters,
+// the profile reader should error out.
+RUN: printf '\11\0\6\0\1\0\0\0' >> %t.profraw
Digger Lin [Tue, 15 Oct 2019 17:40:41 +0000 (17:40 +0000)]
[XCOFF] Output object text section header and symbol entry for program code.
This is remaining part of rG41ca91f2995b: [AIX][XCOFF] Output XCOFF
object text section header and symbol entry for rogram code.
SUMMARY:
Original form of this patch is provided by Stefan Pintillie.
1. The patch try to output program code section header , symbol entry for
program code (PR) and Instruction into the raw text section.
2. The patch include how to alignment and layout the CSection in the text
section.
3. The patch also reorganize the code , put some codes into a function.
(XCOFFObjectWriter::writeSymbolTableEntryForControlSection)
Additional: We can not add raw data of text section test in the patch, If want
to output raw text section data,it need a function description patch first.
Alina Sbirlea [Tue, 15 Oct 2019 17:25:36 +0000 (17:25 +0000)]
[NewGVN] Check that call has an access.
Check that a call has an attached MemoryAccess before calling
getClobbering on the instruction.
If no access is attached, the instruction does not access memory.
[VirtualFileSystem] Support virtual working directory in the RedirectingFS
Before this patch, changing the working directory of the RedirectingFS
would just forward to its external file system. This prevented us from
having a working directory that only existed in the VFS mapping.
This patch adds support for a virtual working directory in the
RedirectingFileSystem. It now keeps track of its own WD in addition to
updating the WD of the external file system. This ensures that we can
still fall through for relative paths.
This change was originally motivated by the reproducer infrastructure in
LLDB where we want to deal transparently with relative paths.
Digger Lin [Tue, 15 Oct 2019 17:09:54 +0000 (17:09 +0000)]
[AIX][XCOFF] Output XCOFF object text section header and symbol entry for program code.
SUMMARY
Original form of this patch is provided by Stefan Pintillie.
The patch try to output program code section header , symbol entry for program code (PR) and Instruction into the raw text section.
The patch include how to alignment and layout the CSection in the text section.
The patch also reorganize the code , put some codes into a function(XCOFFObjectWriter::writeSymbolTableEntryForControlSection)
Additional: We can not add raw data of text section test in the patch, If want to output raw text section data,it need a function description patch first.