Tom Lane [Sat, 12 Aug 2017 16:08:54 +0000 (12:08 -0400)]
Simplify fetch-slot-xmins logic in recovery TAP tests.
Merge wait_slot_xmins() into get_slot_xmins(). At this point the only
place that wasn't doing a wait was the initial-state test, and a wait
there seems pretty harmless.
Tom Lane [Fri, 11 Aug 2017 21:39:27 +0000 (17:39 -0400)]
Be more thorough about cleaning out gcov litter.
At least on my machine, a run with code coverage enabled produces some
".gcov" files whose names begin with ".". "rm -f *.gcov" fails to match
those, so they don't get cleaned up by "make clean". Fix it.
Tom Lane [Fri, 11 Aug 2017 21:27:54 +0000 (17:27 -0400)]
Add regression tests exercising more code paths in nodeLimit.c.
Perusal of the code coverage report shows that the existing regression
test cases for LIMIT/OFFSET don't exercise the nodeLimit code paths
involving backwards scan, empty results, or null values of LIMIT/OFFSET.
Improve the coverage.
Tom Lane [Fri, 11 Aug 2017 20:52:12 +0000 (16:52 -0400)]
Add regression tests exercising the non-hashed code paths in nodeSetop.c.
Perusal of the code coverage report shows that the existing regression
test cases for INTERSECT and EXCEPT seemingly all prefer the SETOP_HASHED
implementation. Add some test cases in which we force use of the
SETOP_SORTED mode.
Tom Lane [Fri, 11 Aug 2017 19:19:40 +0000 (15:19 -0400)]
Remove pgbench's restriction on placement of -M switch.
Previously the -M switch had to appear before any switch that directly
or indirectly specified a benchmarking script. This was both confusing
and inadequately documented, as per gripe from Tatsuo Ishii. We can
remove the restriction at the cost of making an extra pass over the
lists of SQL commands, which seems like a cheap price (the string scans
themselves likely cost much more). The change is just to not extract
parameters from the SQL commands until we have finished parsing the
switches and know the final value of -M.
Per discussion, we'll treat this as a low-grade bug fix and sneak it
into v10, rather than holding it for v11.
Tom Lane, reviewed by Tatsuo Ishii and Fabien Coelho
Peter Eisentraut [Thu, 10 Aug 2017 00:34:51 +0000 (20:34 -0400)]
Reject use of ucol_strcollUTF8() before ICU 53
Various bugs can cause crashes, so don't use that function before ICU
53. It will fall back to the code path used for other encodings.
Since we now tie the function availability to an ICU version, we don't
need the configure test anymore. That also resolves the issue that the
test result was previously hardcoded for Windows.
researched by Daniel Verite <daniel@manitou-mail.org>, Peter Geoghegan
<pg@bowt.ie>, Tom Lane <tgl@sss.pgh.pa.us>
Robert Haas [Thu, 10 Aug 2017 17:44:30 +0000 (13:44 -0400)]
Improve the error message when creating an empty range partition.
The previous message didn't mention the name of the table or the
bounds. Put the table name in the primary error message and the
bounds in the detail message.
Amit Langote, changed slightly by me. Suggestions on the exac
phrasing from Tom Lane, David G. Johnston, and Dean Rasheed.
Robert Haas [Thu, 10 Aug 2017 17:22:31 +0000 (13:22 -0400)]
Make some more improvements to parallel query documentation.
Many places that mentioned only Gather should also mention Gather
Merge, or should be phrased in a more neutral way. Be more clear
about the fact that max_parallel_workers_per_gather affects the number
of workers the planner may want to use. Fix a typo. Explain how
Gather Merge works. Adjust wording around parallel scans to be a bit
more clear. Adjust wording around parallel-restricted operations for
the fact that uncorrelated subplans are no longer restricted.
Robert Haas [Thu, 10 Aug 2017 15:20:57 +0000 (11:20 -0400)]
Remove incorrect assertion in clog.c
We must advance the oldest XID that can be safely looked up in clog
*before* truncating CLOG, and the oldest XID that can't be reused
*after* truncating CLOG. This assertion, and the accompanying
comment, are confused; remove them.
Tom Lane [Wed, 9 Aug 2017 21:03:09 +0000 (17:03 -0400)]
Fix handling of container types in find_composite_type_dependencies.
find_composite_type_dependencies correctly found columns that are of
the specified type, and columns that are of arrays of that type, but
not columns that are domains or ranges over the given type, its array
type, etc. The most general way to handle this seems to be to assume
that any type that is directly dependent on the specified type can be
treated as a container type, and processed recursively (allowing us
to handle nested cases such as ranges over domains over arrays ...).
Since a type's array type already has such a dependency, we can drop
the existing special case for the array type.
The very similar logic in get_rels_with_domain was likewise a few
bricks shy of a load, as it supposed that a directly dependent type
could *only* be a sub-domain. This is already wrong for ranges over
domains, and it'll someday be wrong for arrays over domains.
Add test cases illustrating the problems, and back-patch to all
supported branches.
Tom Lane [Wed, 9 Aug 2017 16:05:53 +0000 (12:05 -0400)]
Prevent passing down MAKELEVEL/MAKEFLAGS from non-GNU make to GNU make.
FreeBSD's make, for one, sets the MAKELEVEL environment variable when
invoking commands. In the special Makefile we provide to hand off control
from a non-GNU make to GNU make, this causes GNU make to think it is a
child make invocation rather than top-level. That interferes with the hack
added in commit dcae5facc to cause the temp-install tree to be made only by
the top-level invocation of gmake. Unset the variable to prevent that.
Likewise unset MAKEFLAGS, which FreeBSD's make also sets, and which could
easily confuse gmake. There are no reports of actual trouble from that,
but it seems better to be proactive.
Tom Lane [Tue, 8 Aug 2017 23:18:11 +0000 (19:18 -0400)]
Fix datumSerialize infrastructure to not crash on non-varlena data.
Commit 1efc7e538 did a poor job of emulating existing logic for touching
Datums that might be expanded-object pointers. It didn't check for typlen
being -1 first, which meant it could crash on fixed-length pass-by-ref
values, and probably on cstring values as well. It also didn't use
DatumGetPointer before VARATT_IS_EXTERNAL_EXPANDED, which while currently
harmless is not according to documentation nor prevailing style.
I also think the lack of any explanation as to why datumSerialize makes
these particular nonobvious choices is pretty awful, so fix that.
Per report from Jarred Ward. Back-patch to 9.6 where this code came in.
Tom Lane [Tue, 8 Aug 2017 22:03:30 +0000 (18:03 -0400)]
Fix yet another race condition in recovery/t/001_stream_rep.pl.
In commit 5c77690f6, we added polling in front of most of the
get_slot_xmins calls in 001_stream_rep.pl, but today's results from
buildfarm member nightjar show that at least one more poll loop
is needed.
Proactively add a poll loop before the next-to-last get_slot_xmins call
as well. It may be that there is no race condition there because the
standby_2 server is shut down at that point, but I'm quite tired of
fighting with this test script. The empirical evidence that it's safe,
from the buildfarm, is no stronger than the evidence for the other
call that nightjar just proved unsafe.
The only remaining get_slot_xmins calls without wait_slot_xmins
protection are the first two, which should be OK since nothing has
happened at that point. It's tempting to ignore that special case
and merge get_slot_xmins and wait_slot_xmins into a single function.
I didn't go that far though.
Alvaro Herrera [Tue, 8 Aug 2017 20:07:46 +0000 (16:07 -0400)]
Fix replication origin-related race conditions
Similar to what was fixed in commit 9915de6c1cb2 for replication slots,
but this time it's related to replication origins: DROP SUBSCRIPTION
attempts to drop the replication origin, but that fails if the
replication worker process hasn't yet marked it unused. This causes
failures in the buildfarm:
ERROR: could not drop replication origin with OID 1, in use by PID 34069
Like the aforementioned commit, fix by having the process running DROP
SUBSCRIPTION sleep until the worker marks the the replication origin
struct as free. This uses a condition variable on each replication
origin shmem state struct, so that the session trying to drop can sleep
and expect to be awakened by the process keeping the origin open.
Alvaro Herrera [Tue, 8 Aug 2017 19:37:44 +0000 (15:37 -0400)]
Fix inadequacies in recently added wait events
In commit 9915de6c1cb2, we introduced a new wait point for replication
slots and incorrectly labelled it as wait event PG_WAIT_LOCK. That's
wrong, so invent an appropriate new wait event instead, and document it
properly.
While at it, fix numerous other problems in the vicinity:
- two different walreceiver wait events were being mixed up in a single
wait event (which wasn't documented either); split it out so that they
can be distinguished, and document the new events properly.
- ParallelBitmapPopulate was documented but didn't exist.
- ParallelBitmapScan was not documented (I think this should be called
"ParallelBitmapScanInit" instead.)
Tom Lane [Mon, 7 Aug 2017 20:42:18 +0000 (16:42 -0400)]
Skip test for IPC::Run if user is overriding our search for PROVE.
The check for IPC::Run we added in commit c254970ad is useful in simple
cases, but there are real use-cases where "prove" is coming from a
different Perl installation than the "perl" we want to use to build.
In such cases asking whether "perl" knows about IPC::Run is irrelevant
and can cause an unnecessary configure failure. Hence, if user has
specified a value for PROVE, skip the IPC::Run check. Per discussion
with Andrew Dunstan.
Fix local/remote attribute mix-up in logical replication
This would lead to failures if local and remote tables have a different
column order. The tests previously didn't catch that because they only
tested the initial data copy. So add another test that exercises the
apply worker.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
Tom Lane [Mon, 7 Aug 2017 14:19:01 +0000 (10:19 -0400)]
Require update permission for the large object written by lo_put().
lo_put() surely should require UPDATE permission, the same as lowrite(),
but it failed to check for that, as reported by Chapman Flack. Oversight
in commit c50b7c09d; backpatch to 9.4 where that was introduced.
Noah Misch [Mon, 7 Aug 2017 14:09:28 +0000 (07:09 -0700)]
Again match pg_user_mappings to information_schema.user_mapping_options.
Commit 3eefc51053f250837c3115c12f8119d16881a2d7 claimed to make
pg_user_mappings enforce the qualifications user_mapping_options had
been enforcing, but its removal of a longstanding restriction left them
distinct when the current user is the subject of a mapping yet has no
server privileges. user_mapping_options emits no rows for such a
mapping, but pg_user_mappings includes full umoptions. Change
pg_user_mappings to show null for umoptions. Back-patch to 9.2, like
the above commit.
Some authentication methods allowed it, others did not. In the client-side,
libpq does not even try to authenticate with an empty password, which makes
using empty passwords hazardous: an administrator might think that an
account with an empty password cannot be used to log in, because psql
doesn't allow it, and not realize that a different client would in fact
allow it. To clear that confusion and to be be consistent, disallow empty
passwords in all authentication methods.
All the authentication methods that used plaintext authentication over the
wire, except for BSD authentication, already checked that the password
received from the user was not empty. To avoid forgetting it in the future
again, move the check to the recv_password_packet function. That only
forbids using an empty password with plaintext authentication, however.
MD5 and SCRAM need a different fix:
* In stable branches, check that the MD5 hash stored for the user does not
not correspond to an empty string. This adds some overhead to MD5
authentication, because the server needs to compute an extra MD5 hash, but
it is not noticeable in practice.
* In HEAD, modify CREATE and ALTER ROLE to clear the password if an empty
string, or a password hash that corresponds to an empty string, is
specified. The user-visible behavior is the same as in the stable branches,
the user cannot log in, but it seems better to stop the empty password from
entering the system in the first place. Secondly, it is fairly expensive to
check that a SCRAM hash doesn't correspond to an empty string, because
computing a SCRAM hash is much more expensive than an MD5 hash by design,
so better avoid doing that on every authentication.
We could clear the password on CREATE/ALTER ROLE also in stable branches,
but we would still need to check at authentication time, because even if we
prevent empty passwords from being stored in pg_authid, there might be
existing ones there already.
Reported by Jeroen van der Ham, Ben de Graaff and Jelte Fennema.
The NOTICE messages about tables being added or removed during
subscription refresh would be incorrect and possibly confusing if the
transaction rolls back, so silence them but keep them available for
debugging.
Tom Lane [Mon, 7 Aug 2017 03:26:09 +0000 (23:26 -0400)]
Update RELEASE_CHANGES' example of branch name format.
We're planning to put an underscore before the major version number in
branch names for v10 and later. Make sure the recipe in RELEASE_CHANGES
reflects that.
In passing, add a reminder to consider doing pgindent right before
the branch.
The callers for GetOldestSafeDecodingTransactionId() all inverted the
argument for the argument introduced in 2bef06d516460. Luckily this
appears to be inconsequential for the moment, as we wait for
concurrent in-progress transaction when assembling a
snapshot. Additionally this could only make a difference when adding a
second logical slot, because only a pre-existing slot could cause an
issue by lowering the returned xid dangerously much.
Reported-By: Antonin Houska
Discussion: https://postgr.es/m/32704.1496993134@localhost
Backport: 9.4-, where 2bef06d516460 was backpatched to.
Tom Lane [Sat, 5 Aug 2017 15:47:28 +0000 (11:47 -0400)]
Improve configure's check for ICU presence.
Without ICU's header files, "configure --with-icu" would succeed anyway,
at least when using the non-pkgconfig-based setup. Then you got a bunch of
ugly failures at build. Add an explicit header check to tighten that up.
Robert Haas [Sat, 5 Aug 2017 14:49:26 +0000 (10:49 -0400)]
Make pg_stop_backup's wait_for_archive flag work on standbys.
Previously, it had no effect. Now, if archive_mode=always, it will
work, and if not, you'll get a warning.
Masahiko Sawada, Michael Paquier, and Robert Haas. The patch as
submitted also changed the behavior so that we would write and remove
history files on standbys, but that seems like material for a separate
patch to me.
Supporting ICU 4.2 seems useful because it ships with CentOS 6.
Versions before ICU 4.6 don't support pkg-config, so document an
installation method without using pkg-config.
In ICU 4.2, ucol_getKeywordsForLocale() sometimes returns values that
will not be accepted by uloc_toLanguageTag(). Skip loading keyword
variants in that version.
Robert Haas [Fri, 4 Aug 2017 23:33:01 +0000 (19:33 -0400)]
hash: Immediately after a bucket split, try to clean the old bucket.
If it works, then we won't be storing two copies of all the tuples
that were just moved. If not, VACUUM will still take care of it
eventually. Per a report from AP and analysis from Amit Kapila, it
seems that a bulk load can cause splits fast enough that VACUUM won't
deal with the problem in time to prevent bloat.
Robert Haas [Fri, 4 Aug 2017 19:29:26 +0000 (15:29 -0400)]
hash: Increase the number of possible overflow bitmaps by 8x.
Per a report from AP, it's not that hard to exhaust the supply of
bitmap pages if you create a table with a hash index and then insert a
few billion rows - and then you start getting errors when you try to
insert additional rows. In the particular case reported by AP,
there's another fix that we can make to improve recycling of overflow
pages, which is another way to avoid the error, but there may be other
cases where this problem happens and that fix won't help. So let's
buy ourselves as much headroom as we can without rearchitecting
anything.
The comments claim that the old limit was 64GB, but it was really
only 32GB, because we didn't use all the bits in the page for bitmap
bits - only the largest power of 2 that could fit after deducting
space for the page header and so forth. Thus, we have 4kB per page
for bitmap bits, not 8kB. The new limit is thus actually 8 times the
old *real* limit but only 4 times the old *purported* limit.
Since this breaks on-disk compatibility, bump HASH_VERSION. We've
already done this earlier in this release cycle, so this doesn't cause
any incremental inconvenience for people using pg_upgrade from
releases prior to v10. However, users who use pg_upgrade to reach
10beta3 or later from 10beta2 or earlier will need to REINDEX any hash
indexes again.
Tom Lane [Fri, 4 Aug 2017 15:45:18 +0000 (11:45 -0400)]
Apply ALTER ... SET NOT NULL recursively in ALTER ... ADD PRIMARY KEY.
If you do ALTER COLUMN SET NOT NULL against an inheritance parent table,
it will recurse to mark all the child columns as NOT NULL as well. This
is necessary for consistency: if the column is labeled NOT NULL then
reading it should never produce nulls.
However, that didn't happen in the case where ALTER ... ADD PRIMARY KEY
marks a target column NOT NULL that wasn't before. That was questionable
from the beginning, and now Tushar Ahuja points out that it can lead to
dump/restore failures in some cases. So let's make that case recurse too.
Although this is meant to fix a bug, it's enough of a behavioral change
that I'm pretty hesitant to back-patch, especially in view of the lack
of similar field complaints. It doesn't seem to be too late to put it
into v10 though.
Tom Lane [Fri, 4 Aug 2017 15:07:10 +0000 (11:07 -0400)]
Disallow SSL session tickets.
We don't actually support session tickets, since we do not create an SSL
session identifier. But it seems that OpenSSL will issue a session ticket
on-demand anyway, which will then fail when used. This results in
reconnection failures when using ticket-aware client-side SSL libraries
(such as the Npgsql .NET driver), as reported by Shay Rojansky.
To fix, just tell OpenSSL not to issue tickets. At some point in the
far future, we might consider enabling tickets instead. But the security
implications of that aren't entirely clear; and besides it would have
little benefit except for very short-lived database connections, which is
Something We're Bad At anyhow. It would take a lot of other work to get
to a point where that would really be an exciting thing to do.
While at it, also tell OpenSSL not to use a session cache. This doesn't
really do anything, since a backend would never populate the cache anyway,
but it might gain some micro-efficiencies and/or reduce security
exposures.
Patch by me, per discussion with Heikki Linnakangas and Shay Rojansky.
Back-patch to all supported versions.
ALTER USER ... SET did not support all the syntax variants of ALTER ROLE
... SET. Fix that, and to avoid further deviations of this kind, unify
many the grammar rules for ROLE/USER/GROUP commands.
Tom Lane [Thu, 3 Aug 2017 21:36:23 +0000 (17:36 -0400)]
Fix pg_dump/pg_restore to emit REFRESH MATERIALIZED VIEW commands last.
Because we push all ACL (i.e. GRANT/REVOKE) restore steps to the end,
materialized view refreshes were occurring while the permissions on
referenced objects were still at defaults. This led to failures if,
say, an MV owned by user A reads from a table owned by user B, even
if B had granted the necessary privileges to A. We've had multiple
complaints about that type of restore failure, most recently from
Jordan Gigov.
The ideal fix for this would be to start treating ACLs as dependency-
sortable objects, rather than hard-wiring anything about their dump order
(the existing approach is a messy kluge dating to commit dc0e76ca3).
But that's going to be a rather major change, and it certainly wouldn't
lead to a back-patchable fix. As a short-term solution, convert the
existing two-pass hack (ie, normal objects then ACLs) to a three-pass hack,
ie, normal objects then ACLs then matview refreshes. Because this happens
in RestoreArchive(), it will also fix the problem when restoring from an
existing archive-format dump.
(Note this means that if a matview refresh would have failed under the
permissions prevailing at dump time, it'll fail during restore as well.
We'll define that as user error rather than something we should try
to work around.)
To avoid performance loss in parallel restore, we need the matview
refreshes to still be parallelizable. Hence, clean things up enough
so that both ACLs and matviews are handled by the parallel restore
infrastructure, instead of reverting back to serial restore for ACLs.
There is still a final serial step, but it shouldn't normally have to
do anything; it's only there to try to recover if we get stuck due to
some problem like unresolved circular dependencies.
Patch by me, but it owes something to an earlier attempt by Kevin Grittner.
Back-patch to 9.3 where materialized views were introduced.
Alvaro Herrera [Thu, 3 Aug 2017 18:48:54 +0000 (14:48 -0400)]
Fix build on zlib-less environments
Commit 4d57e8381677 added support for getting I/O errors out of zlib,
but it introduced a portability problem for systems without zlib.
Repair by wrapping the zlib call inside #ifdef and restore the original
code in the other branch.
This serves to illustrate the inadequacy of the zlib abstraction in
pg_backup_archiver: there is no way to call gzerror() in that
abstraction. This means that the several places that call GZREAD and
GZWRITE are currently doing error reporting wrongly, but ENOTIME to get
it fixed before next week's release set.
Backpatch to 9.4, like the commit that introduced the problem.
Robert Haas [Thu, 3 Aug 2017 17:09:15 +0000 (13:09 -0400)]
Allow a foreign table CHECK constraint to be initially NOT VALID.
For a table, the constraint can be considered validated immediately,
because the table must be empty. But for a foreign table this is
not necessarily the case.
Robert Haas [Thu, 3 Aug 2017 16:47:00 +0000 (12:47 -0400)]
Improve ExecModifyTable comments.
Some of these comments wrongly implied that only an AFTER ROW trigger
will cause a 'wholerow' attribute to be present for a foreign table,
but a BEFORE ROW trigger can have the same effect. Others implied
that it would always be present for a foreign table, but that's not
true either.
Alvaro Herrera [Wed, 2 Aug 2017 22:26:26 +0000 (18:26 -0400)]
Fix pg_dump's errno checking for zlib I/O
Some error reports were reporting strerror(errno), which for some error
conditions coming from zlib are wrong, resulting in confusing reports
such as
pg_restore: [compress_io] could not read from input file: Success
which makes no sense. To correctly extract the error message we need to
use gzerror(), so let's do that.
This isn't as comprehensive or as neat as I would like, but at least it
should improve things in many common cases. The zlib abstraction in
compress_io does not seem to be applied consistently enough; we could
perhaps improve that, but it seems master-only material, not a bug fix
for back-patching.
This problem goes back all the way, but I decided to apply back to 9.4
only, because older branches don't contain commit 14ea89366 which this
change depends on.
Authors: Vladimir Kunschikov, Álvaro Herrera
Discussion: https://postgr.es/m/1498120508308.9826@infotecs.ru
Tom Lane [Wed, 2 Aug 2017 20:55:03 +0000 (16:55 -0400)]
Add pgtcl back to the list of externally-maintained client interfaces.
FlightAware is still maintaining this, and indeed is seemingly being
more active with it than the pgtclng fork is. List both, for the
time being anyway.
In the back branches, also back-port commit e20f679f6 and other
recent updates to the client-interfaces list. I think these are
probably of current interest to users of back branches. I did
not touch the list of externally maintained PLs in the back
branches, though. Those are much more likely to be server version
sensitive, and I don't know which of these PLs work all the way back.
Tom Lane [Wed, 2 Aug 2017 16:16:50 +0000 (12:16 -0400)]
Remove broken and useless entry-count printing in HASH_DEBUG code.
init_htab(), with #define HASH_DEBUG, prints a bunch of hashtable
parameters. It used to also print nentries, but commit 44ca4022f changed
that to "hash_get_num_entries(hctl)", which is wrong (the parameter should
be "hashp").
Rather than correct the coding, though, let's just remove that field from
the printout. The table must be empty, since we just finished building
it, so expensively calculating the number of entries is rather pointless.
Moreover hash_get_num_entries makes assumptions (about not needing locks)
which we could do without in debugging code.
Noted by Choi Doo-Won in bug #14764. Back-patch to 9.6 where the
faulty code was introduced.
Tom Lane [Wed, 2 Aug 2017 15:28:46 +0000 (11:28 -0400)]
Remove duplicate setting of SSL_OP_SINGLE_DH_USE option.
Commit c0a15e07c moved the setting of OpenSSL's SSL_OP_SINGLE_DH_USE option
into a new subroutine initialize_dh(), but forgot to remove it from where
it was. SSL_CTX_set_options() is a trivial function, amounting indeed to
just "ctx->options |= op", hence there's no reason to contort the code or
break separation of concerns to avoid calling it twice. So separating the
DH setup from disabling of old protocol versions is a good change, but we
need to finish the job.
Noted while poking into the question of SSL session tickets.
The buildfarm is still showing at least three distinct behaviors for
a bad locale name in CREATE COLLATION. Although this test was helpful
for getting the error reporting code into some usable shape, it doesn't
seem worth carrying multiple expected-files in order to support the
test in perpetuity. So pull it back out.
Tom Lane [Tue, 1 Aug 2017 21:17:20 +0000 (17:17 -0400)]
Second try at getting useful errors out of newlocale/_create_locale.
The early buildfarm returns for commit 1e165d05f are pretty awful:
not only does Windows not return a useful error, but it looks like
a lot of Unix-ish platforms don't either. Given the number of
different errnos seen so far, guess that what's really going on is
that some newlocale() implementations fail to set errno at all.
Hence, let's try zeroing errno just before newlocale() and then
if it's still zero report as though it's ENOENT. That should cover
the Windows case too.
It's clear that we'll have to drop the regression test case, unless
we want to maintain a separate expected-file for platforms without
HAVE_LOCALE_T. But I'll leave it there awhile longer to see if this
actually improves matters or not.
Tom Lane [Tue, 1 Aug 2017 20:49:23 +0000 (16:49 -0400)]
Suppress less info in regression tests using DROP CASCADE.
DROP CASCADE doesn't currently promise to visit dependent objects in
a fixed order, so when the regression tests use it, we typically need
to suppress the details of which objects get dropped in order to have
predictable test output. Traditionally we've done that by setting
client_min_messages higher than NOTICE, but there's a better way:
we can "\set VERBOSITY terse" in psql. That suppresses the DETAIL
message with the object list, but we still get the basic notice telling
how many objects were dropped. So at least the test case can verify
that the expected number of objects were dropped.
The VERBOSITY method was already in use in a few places, but run
around and use it wherever it makes sense.
Tom Lane [Tue, 1 Aug 2017 20:11:51 +0000 (16:11 -0400)]
Try to deliver a sane message for _create_locale() failure on Windows.
We were just printing errno, which is certainly not gonna work on
Windows. Now, it's not entirely clear from Microsoft's documentation
whether _create_locale() adheres to standard Windows error reporting
conventions, but let's assume it does and try to map the GetLastError
result to an errno. If this turns out not to work, probably the best
thing to do will be to assume the error is always ENOENT on Windows.
This is a longstanding bug, but given the lack of previous field
complaints, I'm not excited about back-patching it.
Tom Lane [Tue, 1 Aug 2017 17:51:05 +0000 (13:51 -0400)]
Allow creation of C/POSIX collations without depending on libc behavior.
Most of our collations code has special handling for the locale names
"C" and "POSIX", allowing those collations to be used whether or not
the system libraries think those locale names are valid, or indeed
whether said libraries even have any locale support. But we missed
handling things that way in CREATE COLLATION. This meant you couldn't
clone the C/POSIX collations, nor explicitly define a new collation
using those locale names, unless the libraries allow it. That's pretty
pointless, as well as being a violation of pg_newlocale_from_collation's
API specification.
The practical effect of this change is quite limited: it allows creating
such collations even on platforms that don't HAVE_LOCALE_T, and it allows
making "POSIX" collation objects on Windows, which before this would only
let you make "C" collation objects. Hence, even though this is a bug fix
IMO, it doesn't seem worth the trouble to back-patch.
In passing, suppress the DROP CASCADE detail messages at the end of the
collation regression test. I'm surprised we've never been bit by
message ordering issues there.
Tom Lane [Tue, 1 Aug 2017 15:40:00 +0000 (11:40 -0400)]
Further improve consistency of configure's program searching.
Peter Eisentraut noted that commit 40b9f1921 had broken a configure
behavior that some people might rely on: AC_CHECK_PROGS(FOO,...) will
allow the search to be overridden by specifying a value for FOO on
configure's command line or in its environment, but AC_PATH_PROGS(FOO,...)
accepts such an override only if it's an absolute path. We had worked
around that behavior for some, but not all, of the pre-existing uses
of AC_PATH_PROGS by just skipping the macro altogether when FOO is
already set. Let's standardize on that workaround for all uses of
AC_PATH_PROGS, new and pre-existing, by wrapping AC_PATH_PROGS in a
new macro PGAC_PATH_PROGS. While at it, fix a deficiency of the old
workaround code by making sure we report the setting to configure's log.
Eventually I'd like to improve PGAC_PATH_PROGS so that it converts
non-absolute override inputs to absolute form, eg "PYTHON=python3"
becomes, say, PYTHON = /usr/bin/python3. But that will take some
nontrivial coding so it doesn't seem like a thing to do in late beta.
XLByteToSeg and XLByteToPrevSeg calculate only a segment number. The
definition of these macros were modified by commit dfda6ebaec6763090fb78b458a979b558c50b39b but the comment remain
unchanged.
Patch by Yugo Nagata. Back patched to 9.3 and beyond.
Always use 2048 bit DH parameters for OpenSSL ephemeral DH ciphers.
1024 bits is considered weak these days, but OpenSSL always passes 1024 as
the key length to the tmp_dh callback. All the code to handle other key
lengths is, in fact, dead.
To remedy those issues:
* Only include hard-coded 2048-bit parameters.
* Set the parameters directly with SSL_CTX_set_tmp_dh(), without the
callback
* The name of the file containing the DH parameters is now a GUC. This
replaces the old hardcoded "dh1024.pem" filename. (The files for other
key lengths, dh512.pem, dh2048.pem, etc. were never actually used.)
This is not a new problem, but it doesn't seem worth the risk and churn to
backport. If you care enough about the strength of the DH parameters on
old versions, you can create custom DH parameters, with as many bits as you
wish, and put them in the "dh1024.pem" file.
Per report by Nicolas Guini and Damian Quiroga. Reviewed by Michael Paquier.
Tom Lane [Mon, 31 Jul 2017 17:42:48 +0000 (13:42 -0400)]
Doc: specify that the minimum supported version of Perl is 5.8.3.
Previously the docs just said "5.8 or later". Experimentation shows
that while you can build on Unix from a git checkout with 5.8.0,
compiling recent PL/Perl requires at least 5.8.1, and you won't be
able to run the TAP tests with less than 5.8.3 because that's when
they added "prove". (I do not have any information on just what the
MSVC build scripts require.)
Since all these versions are quite ancient, let's not split hairs
in the docs, but just say that 5.8.3 is the minimum requirement.
Tom Lane [Mon, 31 Jul 2017 17:02:49 +0000 (13:02 -0400)]
Record full paths of programs sought by "configure".
Previously we had a mix of uses of AC_CHECK_PROG[S] and AC_PATH_PROG[S].
The only difference between those macros is that the latter emits the
full path to the program it finds, eg "/usr/bin/prove", whereas the
former emits just "prove". Let's standardize on always emitting the
full path; this is better for documentation of the build, and it might
prevent some types of failures if later build steps are done with
a different PATH setting.
I did not touch the AC_CHECK_PROG[S] calls in ax_pthread.m4 and
ax_prog_perl_modules.m4. There seems no need to make those diverge from
upstream, since we do not record the programs sought by the former, while
the latter's call to AC_CHECK_PROG(PERL,...) will never be reached.
Tom Lane [Mon, 31 Jul 2017 15:33:46 +0000 (11:33 -0400)]
Tighten coding for non-composite case in plperl's return_next.
Coverity complained about this code's practice of using scalar variables
as single-element arrays. While that's really just nitpicking, it probably
is more readable to declare them as arrays, so let's do that. A more
important point is that the code was just blithely assuming that the
result tupledesc has exactly one column; if it doesn't, we'd likely get
a crash of some sort in tuplestore_putvalues. Since the tupledesc is
manufactured outside of plperl, that seems like an uncomfortably long
chain of assumptions. We can nail it down at little cost with a sanity
check earlier in the function.
Andres Freund [Mon, 17 Jul 2017 07:33:49 +0000 (00:33 -0700)]
Move ExecProcNode from dispatch to function pointer based model.
This allows us to add stack-depth checks the first time an executor
node is called, and skip that overhead on following
calls. Additionally it yields a nice speedup.
While it'd probably have been a good idea to have that check all
along, it has become more important after the new expression
evaluation framework in b8d7f053c5c2bf2a7e - there's no stack depth
check in common paths anymore now. We previously relied on
ExecEvalExpr() being executed somewhere.
We should move towards that model for further routines, but as this is
required for v10, it seems better to only do the necessary (which
already is quite large).
Author: Andres Freund, Tom Lane Reported-By: Julien Rouhaud
Discussion:
https://postgr.es/m/22833.1490390175@sss.pgh.pa.us
https://postgr.es/m/b0af9eaa-130c-60d0-9e4e-7a135b1e0c76@dalibo.com
Andres Freund [Wed, 26 Jul 2017 00:37:17 +0000 (17:37 -0700)]
Move interrupt checking from ExecProcNode() to executor nodes.
In a followup commit ExecProcNode(), and especially the large switch
it contains, will largely be replaced by a function pointer directly
to the correct node. The node functions will then get invoked by a
thin inline function wrapper. To avoid having to include miscadmin.h
in headers - CHECK_FOR_INTERRUPTS() - move the interrupt checks into
the individual executor routines.
While looking through all executor nodes, I noticed a number of
arguably missing interrupt checks, add these too.
Author: Andres Freund, Tom Lane Reviewed-By: Tom Lane
Discussion:
https://postgr.es/m/22833.1490390175@sss.pgh.pa.us
Tom Lane [Fri, 28 Jul 2017 18:25:28 +0000 (14:25 -0400)]
PL/Perl portability fix: absorb relevant -D switches from Perl.
The Perl documentation is very clear that stuff calling libperl should
be built with the compiler switches shown by Perl's $Config{ccflags}.
We'd been ignoring that up to now, and mostly getting away with it,
but recent Perl versions contain ABI compatibility cross-checks that
fail on some builds because of this omission. In particular the
sizeof(PerlInterpreter) can come out different due to some fields being
added or removed; which means we have a live ABI hazard that we'd better
fix rather than continuing to sweep it under the rug.
However, it still seems like a bad idea to just absorb $Config{ccflags}
verbatim. In some environments Perl was built with a different compiler
that doesn't even use the same switch syntax. -D switch syntax is pretty
universal though, and absorbing Perl's -D switches really ought to be
enough to fix the problem.
Furthermore, Perl likes to inject stuff like -D_LARGEFILE_SOURCE and
-D_FILE_OFFSET_BITS=64 into $Config{ccflags}, which affect libc ABIs on
platforms where they're relevant. Adopting those seems dangerous too.
It's unclear whether a build wherein Perl and Postgres have different ideas
of sizeof(off_t) etc would work, or whether anyone would care about making
it work. But it's dead certain that having different stdio ABIs in
core Postgres and PL/Perl will not work; we've seen that movie before.
Therefore, let's also ignore -D switches for symbols beginning with
underscore. The symbols that we actually need to import should be the ones
mentioned in perl.h's PL_bincompat_options stanza, and none of those start
with underscore, so this seems likely to work. (If it turns out not to
work everywhere, we could consider intersecting the symbols mentioned in
PL_bincompat_options with the -D switches. But that will be much more
complicated, so let's try this way first.)
This will need to be back-patched, but first let's see what the
buildfarm makes of it.
Tom Lane [Fri, 28 Jul 2017 16:25:43 +0000 (12:25 -0400)]
PL/Perl portability fix: avoid including XSUB.h in plperl.c.
In Perl builds that define PERL_IMPLICIT_SYS, XSUB.h defines macros
that replace a whole lot of basic libc functions with Perl functions.
We can't tolerate that in plperl.c; it breaks at least PG_TRY and
probably other stuff. The core idea of this patch is to include XSUB.h
only in the .xs files where it's really needed, and to move any code
broken by PERL_IMPLICIT_SYS out of the .xs files and into plperl.c.
The reason this hasn't been a problem before is that our build techniques
did not result in PERL_IMPLICIT_SYS appearing as a #define in PL/Perl,
even on some platforms where Perl thinks it is defined. That's about to
change in order to fix a nasty portability issue, so we need this work to
make the code safe for that.
Rather unaccountably, the Perl people chose XSUB.h as the place to provide
the versions of the aTHX/aTHX_ macros that are needed by code that's not
explicitly aware of the MULTIPLICITY API conventions. Hence, just removing
XSUB.h from plperl.c fails miserably. But we can work around that by
defining PERL_NO_GET_CONTEXT (which would make the relevant stanza of
XSUB.h a no-op anyway). As explained in perlguts.pod, that means we need
to add a "dTHX" macro call in every C function that calls a Perl API
function. In most of them we just add this at the top; but since the
macro fetches the current Perl interpreter pointer, more care is needed
in functions that switch the active interpreter. Lack of the macro is
easily recognized since it results in bleats about "my_perl" not being
defined.
(A nice side benefit of this is that it significantly reduces the number
of fetches of the current interpreter pointer. On my machine, plperl.so
gets more than 10% smaller, and there's probably some performance win too.
We could reduce the number of fetches still more by decorating the code
with pTHX_/aTHX_ macros to pass the interpreter pointer around, as
explained by perlguts.pod; but that's a task for another day.)
Formatting note: pgindent seems happy to treat "dTHX;" as a declaration
so long as it's the first thing after the left brace, as we'd already
observed with respect to the similar macro "dSP;". If you try to put
it later in a set of declarations, pgindent puts ugly extra space
around it.
Having removed XSUB.h from plperl.c, we need only move the support
functions for spi_return_next and util_elog (both of which use PG_TRY)
out of the .xs files and into plperl.c. This seems sufficient to
avoid the known problems caused by PERL_IMPLICIT_SYS, although we
could move more code if additional issues emerge.
This will need to be back-patched, but first let's see what the
buildfarm makes of it.
Tom Lane [Thu, 27 Jul 2017 17:30:59 +0000 (13:30 -0400)]
Standardize describe.c's behavior for no-matching-objects a bit more.
Most functions in this file are content to print an empty table if there
are no matching objects. In some, the behavior is to loop over all
matching objects and print a table for each one; therefore, without any
extra logic, nothing at all would be printed if no objects match.
We accept that outcome in QUIET mode, but in normal mode it seems better
to print a helpful message. The new \dRp+ command had not gotten that
memo; fix it.
listDbRoleSettings() is out of step on this, but I think it's better for
it to print a custom message rather than an empty table, because of the
possibility that the user is confused about what the pattern arguments mean
or which is which. The original message wording was entirely useless for
clarifying that, though, not to mention being unlike the wordings used
elsewhere. Improve the text, and also print the messages with psql_error
as is the general custom here.
listTables() is also out in left field, but since it's such a heavily
used function, I'm hesitant to change its behavior so much as to print
an empty table rather than a custom message. People are probably used
to getting a message. But we can make the wording more standardized and
helpful, and print it with psql_error rather than printing to stdout.
In both listDbRoleSettings and listTables, we play dumb and emit an
empty table, not a custom message, in QUIET mode. That was true before
and I see no need to change it.
Several of the places printing such messages risked dumping core if
no pattern string had been provided; make them more wary. (This case
is presently unreachable in describeTableDetails; but it shouldn't be
assuming that command.c will never pass it a null. The text search
functions would only reach the case if a database contained no text
search objects, which is also currently impossible since we pin the
built-in objects, but again it seems unwise to assume that here.)
Tom Lane [Thu, 27 Jul 2017 16:12:37 +0000 (12:12 -0400)]
Avoid use of sprintf/snprintf in describe.c.
Most places were already using the PQExpBuffer library for constructing
variable-length strings; bring the two stragglers into line.
describeOneTSParser was living particularly dangerously since it wasn't
even using snprintf().
projects / postgresql / log