Summary:
We need to know if ASTReader already has a DeserializationListner or
not, and this also helps to create a multiplexing deserialization
listener if there is one already attached.
[ConfigFiles] Update argument strings when merging argrument lists
Implementation of `InputArgList` assumes its field `ArgStrings` contains
strings for each argument exactly in the same order. This condition was
broken when arguments from config file and from invocation were merged.
This change fixes https://bugs.llvm.org/show_bug.cgi?id=37196 (Clang
config files can crash argument handling).
Richard Trieu [Wed, 25 Apr 2018 23:50:55 +0000 (23:50 +0000)]
Switch to Clang's isDigit function.
std::isdigit can be overloaded, causing the template deduction to fail. Use
Clang's isDigit function which to avoid this. Switch the other calls for
consistency.
[analyzer] Fix a crash on lifetime extension through aggregate initialization.
If 'A' is a C++ aggregate with a reference field of type 'C', in code like
A a = { C() };
C() is lifetime-extended by 'a'. The analyzer wasn't expecting this pattern and
crashing. Additionally, destructors aren't added in the CFG for this case,
so for now we shouldn't be inlining the constructor for C().
Ana Pazos [Wed, 25 Apr 2018 22:42:38 +0000 (22:42 +0000)]
[RISCV] More validations on the input value of -march=
Supporting additional rules for parsing ISA string.
- RISC-V ISA strings must be lowercase.
E.g.: rv32IMC is not supported, rv32imc is correct.
- Multi-letter extensions are to be separated by a single
underscore '_'. The extension prefix counts as a letter.
This means extensions that start with 's', 'sx' and 'sx'
are all multi-letter.
E.g.:
xasb is a single non-standard extension named 'xasb'
xa_sb are two extensions, the non-standard user level extension
'xa', and the supervisor level extension 'sb'.
- Standard user-level extensions are specified following
a canonical order, according to Table 22.1 in
RISC-V User-Level ISA V2.2.
- Non-standard user-level 'x' extensions,
standard supervisor-level 's' extensions and
non-standard supervisor-level 'sx' extensions
are also specified following a canonical order according
to Table 22.1 in RISC-V User-Level ISA V2.2:
'x' extensions, follwed by 's' extensions and then 'sx' extensions.
- Extensions might have a version number.
Underscores may be used to separate ISA subset components to
improve readability and to provide disambiguation.
E.g.: rv32i2_m3_a1_f2_d2
- Version numbers are divided into major and minor numbers,
separated by a 'p'. If the minor version is 0, then 'p0' can
be omitted.
- Additional checks for dependent extensions and invalid
extensions combinations.
E.g.:
'e' requires rv32
'e' can't be combined with 'f' nor 'd'
'q' requires rv64
- TODO items have also been marked with comments in the code.
[analyzer] Enable analysis of WebKit "unified sources".
Normally the analyzer begins path-sensitive analysis from functions within
the main file, even though the path is allowed to go through any functions
within the translation unit.
When a recent version of WebKit is compiled, the "unified sources" technique
is used, that assumes #including multiple code files into a single main file.
Such file would have no functions defined in it, so the analyzer wouldn't be
able to find any entry points for path-sensitive analysis.
This patch pattern-matches unified file names that are similar to those
used by WebKit and allows the analyzer to find entry points in the included
code files. A more aggressive/generic approach is being planned as well.
Martin Storsjo [Wed, 25 Apr 2018 21:23:59 +0000 (21:23 +0000)]
[Driver] Fix implicit config files from prefixed symlinks
If -no-canonical-prefixes isn't used, the clang executable name used
is the one of the actual executable, not the name of the symlink that
the user invoked.
In these cases, the target prefix was overridden based on the clang
executable name. (On the other hand the implicit -target option
that such a symlink adds, is added as an actual command line parameter
in tools/driver/driver.cop, before resolving the symlink and finding
the actual clang executable.
Use the original ClangNameParts (set from argv[0] in
tools/driver/driver.cpp) if it seems to be initialized propery.
All existing tests of this feature used -no-canonical-prefixes
(possibly because it also makes the driver look in the directory
of the symlink instead of the directory of the executable); add
another one that uses --config-user-dir= to specify the directory
instead. (For actual users of such symlinks, outisde of the test
suite, the directory is probably the same for both.)
This makes this feature work more like what the documentation
describes.
Eli Friedman [Wed, 25 Apr 2018 19:14:05 +0000 (19:14 +0000)]
[TargetInfo] Sort target features before passing them to the backend
Passing the features in random order will lead to unpredictable results
when some of the features are related (like the architecture-version
features on ARM).
It might be possible to fix this particular case in the ARM target code,
to avoid adding overlapping target features. But we should probably be
sorting in any case: the behavior shouldn't depend on StringMap's
hashing algorithm.
Peter Szecsi [Wed, 25 Apr 2018 17:28:03 +0000 (17:28 +0000)]
[ASTImporter] FriendDecl importing improvements
There are only a few cases of importing a frienddecl which is currently supported.
This patch aims to improve the friend import process.
Set FriendObjectKind in case of decls, insert friend into the friend chain
correctly, checks structurally equivalent in a more advanced manner.
Test cases added as well.
[CodeComplete] Fix completion in the middle of ident in ctor lists.
Summary:
The example that was broken before (^ designates completion points):
class Foo {
Foo() : fie^ld^() {} // no completions were provided here.
int field;
};
To fix it we don't cut off lexing after an identifier followed by code
completion token is lexed. Instead we skip the rest of identifier and
continue lexing.
This is consistent with behavior of completion when completion token is
right before the identifier.
[c++2a] [concepts] Add rudimentary parsing support for template concept declarations
This patch is a tweak of changyu's patch: https://reviews.llvm.org/D40381. It differs in that the recognition of the 'concept' token is moved into the machinery that recognizes declaration-specifiers - this allows us to leverage the attribute handling machinery more seamlessly.
See the test file to get a sense of the basic parsing that this patch supports.
There is much more work to be done before concepts are usable...
Yaxun Liu [Wed, 25 Apr 2018 01:10:37 +0000 (01:10 +0000)]
[HIP] Add hip input kind and codegen for kernel launching
HIP is a language similar to CUDA (https://github.com/ROCm-Developer-Tools/HIP/blob/master/docs/markdown/hip_kernel_language.md ).
The language syntax is very similar, which allows a hip program to be compiled as a CUDA program by Clang. The main difference
is the host API. HIP has a set of vendor neutral host API which can be implemented on different platforms. Currently there is open source
implementation of HIP runtime on amdgpu target (https://github.com/ROCm-Developer-Tools/HIP).
This patch adds support of input kind and language standard hip.
When hip file is compiled, both LangOpts.CUDA and LangOpts.HIP is turned on. This allows compilation of hip program as CUDA
in most cases and only special handling of hip program is needed LangOpts.HIP is checked.
This patch also adds support of kernel launching of HIP program using HIP host API.
When -x hip is not specified, there is no behaviour change for CUDA.
Patch by Greg Rodgers.
Revised and lit test added by Yaxun Liu.
[analyzer] Add support for the note diagnostic pieces to plist output format.
Note diagnostic pieces are an additional way of highlighting code sections to
the user. They aren't part of the normal path diagnostic sequence. They can
also be attached to path-insensitive reports.
Notes are already supported by the text output and scan-build.
Expanding our machine-readable plist output format to be able to represent notes
opens up the possibility for various analyzer GUIs to pick them up.
Joel E. Denny [Tue, 24 Apr 2018 14:50:23 +0000 (14:50 +0000)]
[Attr] Print enum attributes at correct position
For example, given:
void fn() {
enum __attribute__((deprecated)) T *p;
}
-ast-print produced:
void fn() {
enum T __attribute__((deprecated(""))) *p;
}
-ast-print on that produced:
void fn() {
enum T *p __attribute__((deprecated("")));
}
The attribute is on enum T in the first case, but it's on p in the
other cases.
Details:
Within enum declarations, enum attributes were always printed after
the tag and any member list. When no member list was present but the
enum was a type specifier in a variable declaration, the attribute
then applied to the variable not the enum, changing the semantics.
This patch fixes that by always printing attributes between the enum's
keyword and tag, as clang already does for structs, unions, and
classes.
Commit 08c258670c ("[OpenCL] Generic address space has been added in
OpenCL v2.0.", 2014-11-26) did not mark the thread_local keyword as a
storage class specifier, whereas it did mark _Thread_local as such.
According to the C++14 spec s7.1.1, thread_local is a storage class
specifier, so mark it as such.
I will add a test for this in a follow-up commit that adds keyword
restrictions to the OpenCL C++ language mode.
[CodeComplete] Fix completion at the end of keywords
Summary:
Make completion behave consistently no matter if it is run at the
start, in the middle or at the end of an identifier that happens to
be a keyword or a macro name. Since completion is often ran on
incomplete identifiers, they may turn into keywords by accident.
For example, we should produce same results for all of these
completion points:
// ^ is completion point.
^class
cla^ss
class^
Previously clang produced different results for the last case (as if
the completion point was after a space: `class ^`).
This change also updates some offsets in tests that (unintentionally?)
relied on the old behavior.
Aleksei Sidorin [Tue, 24 Apr 2018 10:11:53 +0000 (10:11 +0000)]
[ASTImporter] Allow testing of import sequences; fix import of typedefs for anonymous decls
This patch introduces the ability to test an arbitrary sequence of imports
between a given set of virtual source files. This should finally allow
us to write simple tests and fix annoying issues inside ASTImporter
that cause failures in CSA CTU. This is done by refactoring
ASTImporterTest functions and introducing `testImportSequence` facility.
As a side effect, `testImport` facility was generalized a bit more. It
should now allow import of non-decl AST nodes; however, there is still no
test using this ability.
As a "test for test", there is also a fix for import anonymous TagDecls
referred by typedef. Before this patch, the setting of typedef for anonymous
structure was delayed; however, this approach misses the corner case if
an enum constant is imported directly. In this patch, typedefs for
anonymous declarations are imported right after the anonymous declaration
is imported, without any delay.
Thanks to Adam Balogh for suggestions included into this patch.
Martin Storsjo [Tue, 24 Apr 2018 08:50:11 +0000 (08:50 +0000)]
[GCC] Match a GCC version with a patch suffix without a third version component
Previously it would only accept a string as a GCC version if it had
either two components and no suffix, or three components with an
optional suffix.
Debian and ubuntu provided mingw compilers have lib/gcc/target entries
like "5.3-posix" and "5.3-win32". This doesn't try to make any specific
preference between them (other than lexical sorting of the suffix).
Erik Verbruggen [Tue, 24 Apr 2018 08:39:46 +0000 (08:39 +0000)]
[libclang] Only mark CXCursors for explicit attributes with a type
All attributes have a source range associated with it. However, implicit
attributes are added by the compiler, and not added because the user
wrote something in the input. So no token type should be set to
CXCursor_*Attr.
The problem was visible when a class gets marked by e.g.
MSInheritanceAttr, which has the full CXXRecordDecl's range as its
own range. The effect of marking that range as CXCursor_UnexposedAttr
was that all cursors for the record decl, including all child decls,
would become CXCursor_UnexposedAttr.
Roman Lebedev [Mon, 23 Apr 2018 21:35:21 +0000 (21:35 +0000)]
[Sema] Add -Wno-self-assign-overloaded
Summary:
It seems there isn't much enthusiasm for `-wtest` D45685.
This is more conservative version, which i had in the very first
revision of D44883, but that 'erroneously' got removed because of the review.
**Based on some [irc] discussions, it must really be documented that
we want all the new diagnostics to have their own flags, to ease
rollouts, transitions, etc.**
Please do note that i'm only adding `-Wno-self-assign-overloaded`,
but not `-Wno-self-assign-field-overloaded`, because i'm honestly
not aware of any false-positives from the `-field` variant,
but i can just as easily add it if wanted.
https://reviews.llvm.org/D44883#1068561
Improve checks in test/Frontend/ftime-report-template-decl.cpp
Some buildbots seems to have problems with the CHECKs in
test/Frontend/ftime-report-template-decl.cpp.
I this the problem is that the order in which timers are printed
is based on consumed wall time. So there is no guarantee in which
order the timers are printed.
This patch uses CHECK-DAG instead of CHECK to make the test
case less sensitive to the actual time used by the different
passes.
The (sometimes) failing test cases where introduced in trunk@330571.
[OPENMP] Do not cast captured by value variables with pointer types in
NVPTX target.
When generating the wrapper function for the offloading region, we need
to call the outlined function and cast the arguments correctly to follow
the ABI. Usually, variables captured by value are casted to `uintptr_t`
type. But this should not performed for the variables with pointer type.
Aleksei Sidorin [Mon, 23 Apr 2018 15:41:44 +0000 (15:41 +0000)]
[analyzer] Don't crash on printing ConcreteInt of size >64 bits
Printing of ConcreteInts with size >64 bits resulted in assertion failure
in get[Z|S]ExtValue() because these methods are only allowed to be used
with integers of 64 max bit width. This patch fixes the issue.
Henry Wong [Mon, 23 Apr 2018 14:41:17 +0000 (14:41 +0000)]
[analyzer] Move `TaintBugVisitor` from `GenericTaintChecker.cpp` to `BugReporterVisitors.h`.
Summary: `TaintBugVisitor` is a universal visitor, and many checkers rely on it, such as `ArrayBoundCheckerV2.cpp`, `DivZeroChecker.cpp` and `VLASizeChecker.cpp`. Moving `TaintBugVisitor` to `BugReporterVisitors.h` enables other checker can also track where `tainted` value came from.
Manuel Klimek [Mon, 23 Apr 2018 09:34:26 +0000 (09:34 +0000)]
Format closing braces when reformatting the line containing the opening brace.
This required a couple of yaks to be shaved:
1. MatchingOpeningBlockLineIndex was misused to also store the
closing index; instead, use a second variable, as this doesn't
work correctly for "} else {".
2. We needed to change the API of AffectedRangeManager to not
use iterators; we always passed in begin / end for the whole
container before, so there was no mismatch in generality.
3. We need an extra check to discontinue formatting at the top
level, as we now sometimes change the indent of the closing
brace, but want to bail out immediately afterwards, for
example:
void f() {
if (a) {
}
void g();
Previously:
void f() {
if (a) {
}
void g();
Now:
void f() {
if (a) {
}
void g();
When rebasing https://reviews.llvm.org/D40898 with GCC 5.4 on Solaris 11.4, I ran
into a few instances of
In file included from /vol/llvm/src/compiler-rt/local/test/asan/TestCases/Posix/asan-symbolize-sanity-test.cc:19:
In file included from /usr/gcc/5/lib/gcc/x86_64-pc-solaris2.11/5.4.0/../../../../include/c++/5.4.0/string:40:
In file included from /usr/gcc/5/lib/gcc/x86_64-pc-solaris2.11/5.4.0/../../../../include/c++/5.4.0/bits/char_traits.h:39:
In file included from /usr/gcc/5/lib/gcc/x86_64-pc-solaris2.11/5.4.0/../../../../include/c++/5.4.0/bits/stl_algobase.h:64:
In file included from /usr/gcc/5/lib/gcc/x86_64-pc-solaris2.11/5.4.0/../../../../include/c++/5.4.0/bits/stl_pair.h:59:
In file included from /usr/gcc/5/lib/gcc/x86_64-pc-solaris2.11/5.4.0/../../../../include/c++/5.4.0/bits/move.h:57:
/usr/gcc/5/lib/gcc/x86_64-pc-solaris2.11/5.4.0/../../../../include/c++/5.4.0/type_traits:311:39: error: __float128 is not supported on this target
Use special new Clang flag 'FrontendTimesIsEnabled' instead of 'llvm::TimePassesIsEnabled' inside -ftime-report feature.
Differential Revision: https://reviews.llvm.org/D45619
Revert "[clang-format] Improve Incomplete detection for (text) protos"
This reverts commit r330016.
The incomplete detection has too many false positives, picking up typos
for hard failures and refusing to format anything in that case.
Tim Northover [Mon, 23 Apr 2018 08:16:24 +0000 (08:16 +0000)]
[Atomics] warn about atomic accesses using libcalls
If an atomic variable is misaligned (and that suspicion is why Clang emits
libcalls at all) the runtime support library will have to use a lock to safely
access it, with potentially very bad performance consequences. There's a very
good chance this is unintentional so it makes sense to issue a warning.
Also give it a named group so people can promote it to an error, or disable it
if they really don't care.
[XRay] Change std::sort to llvm::sort in response to r327219
r327219 added wrappers to std::sort which randomly shuffle the container before
sorting. This will help in uncovering non-determinism caused due to undefined
sorting order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of
std::sort.
Summary:
In cindex.py, Cursor.result_type called into the wrong libclang
function, causing cursors for ObjC method declarations to return invalid
result types. Fixes Bug 36677.
Petr Pavlu [Sat, 21 Apr 2018 14:35:18 +0000 (14:35 +0000)]
[libclang] Fix LibclangReparseTest.FileName when TMPDIR is set to a symlink
Fix testing of clang_File_tryGetRealPathName() in
LibclangReparseTest.FileName when executing in an environment which has
TMPDIR set to a symbolic link that points to an actual directory. The
test would fail because the name returned by
clang_File_tryGetRealPathName() has the symlink resolved but the test
compared it to the original filename of a temporary file.
The patch addresses the problem by checking only that the value returned
by clang_File_tryGetRealPathName() ends with "main.cpp".
Additionally, the patch makes the previous assertion in the test that
checks result of clang_getFileName() stricter. It newly verifies that
the name returned by the function is exactly same as what was given to
clang_parseTranslationUnit()/clang_getFile().
Jordan Rose [Fri, 20 Apr 2018 17:16:04 +0000 (17:16 +0000)]
Record whether a module came from a private module map
Right now we only use this information in one place, immediately after
we calculate it, but it's still nice information to have. The Swift
project is going to use this to tidy up its "API notes" feature (see
past discussion on cfe-dev that never quite converged).
[CodeGen] Add an option to suppress output of llvm.ident
Summary:
By default Clang outputs its version (including git commit hash, in
case of trunk builds) into object and assembly files. It might be
useful to have an option to disable this, especially for debugging
purposes.
This patch implements new command line flags -Qn and -Qy (the names
are chosen for compatibility with GCC). -Qn disables output of
the 'llvm.ident' metadata string and the 'producer' debug info. -Qy
(enabled by default) does the opposite.
See https://blogs.msdn.microsoft.com/vcblog/2018/04/09/msvc-now-correctly-reports-__cplusplus/
clang-cl already sets __cplusplus to the correct value, so we can just ignore this flag.
Also add test coverage for a few more accepted-but-ignored flags.
projects / clang / log