Jim Warner [Tue, 21 Jul 2015 05:00:00 +0000 (00:00 -0500)]
library: readstat redesigned using 'stack' vs. 'chain'
In addition to that text shown below the line which is
common to several commit messages, this patch contains
several minor changes with lessor impact upon the API:
. A call to procps_stat_read_jiffs() has been added to
those jiffs functions carrying the 'fill' nomenclature
to parallel like functions in some of our other files.
. The #include header files are ordered alphabetically
now, with all those <sys/??> types separately grouped.
. Standard copyright boilerplate was added in .c file.
. The header file follows the conventions of indenting
(by 4 spaces) those parameters too lengthy for 1 line.
------------------------------------------------------
. The former 'chains' have now become 'stacks' without
the 'next' pointer in each result struct. The pointers
initially seemed to offer some flexibility with memory
allocations and benefits for the library access logic.
However, user access was always via displacement and a
a statically allocated chain was cumbersome to define.
. An enumerator ending in '_noop' will no longer serve
as a fencepost delimiter. Rather, it has become a much
more important and flexible user oriented tool. Adding
one or more such 'items' in any items list passed into
the library becomes the means of extending the 'stack'
to also include user (not just library) data. Any such
data is guaranteed to never be altered by the library.
. Anticipating PID support, where many different types
must be represented in a result structure, we'll adopt
a common naming standard. And, while not every results
structure currently needs to reflect disparate types a
union will be employed so the same dot qualifier ('.')
can be used consistently when accessing all such data.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Tue, 21 Jul 2015 05:00:00 +0000 (00:00 -0500)]
library: slab is redesigned to use 'stack' vs. 'chain'
In addition to that text shown below the line which is
common to several commit messages, this patch contains
several minor changes with lessor impact upon the API:
. A 'read' was added to function procps_slabnode_count
(but only when necessary, i.e. info->nodes_used == 0).
. The #include header files are ordered alphabetically
now, with all those <sys/??> types separately grouped.
------------------------------------------------------
. The former 'chains' have now become 'stacks' without
the 'next' pointer in each result struct. The pointers
initially seemed to offer some flexibility with memory
allocations and benefits for the library access logic.
However, user access was always via displacement and a
a statically allocated chain was cumbersome to define.
. An enumerator ending in '_noop' will no longer serve
as a fencepost delimiter. Rather, it has become a much
more important and flexible user oriented tool. Adding
one or more such 'items' in any items list passed into
the library becomes the means of extending the 'stack'
to also include user (not just library) data. Any such
data is guaranteed to never be altered by the library.
. Anticipating PID support, where many different types
must be represented in a result structure, we'll adopt
a common naming standard. And, while not every results
structure currently needs to reflect disparate types a
union will be employed so the same dot qualifier ('.')
can be used consistently when accessing all such data.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Tue, 21 Jul 2015 05:00:00 +0000 (00:00 -0500)]
library: meminfo redesigned to use 'stack' vs. 'chain'
In addition to that text shown below the line which is
common to several commit messages, this patch contains
the following additional change without an API impact:
. The #include header files are ordered alphabetically
now, with all those <sys/??> types separately grouped.
------------------------------------------------------
. The former 'chains' have now become 'stacks' without
the 'next' pointer in each result struct. The pointers
initially seemed to offer some flexibility with memory
allocations and benefits for the library access logic.
However, user access was always via displacement and a
a statically allocated chain was cumbersome to define.
. An enumerator ending in '_noop' will no longer serve
as a fencepost delimiter. Rather, it has become a much
more important and flexible user oriented tool. Adding
one or more such 'items' in any items list passed into
the library becomes the means of extending the 'stack'
to also include user (not just library) data. Any such
data is guaranteed to never be altered by the library.
. Anticipating PID support, where many different types
must be represented in a result structure, we'll adopt
a common naming standard. And, while not every results
structure currently needs to reflect disparate types a
union will be employed so the same dot qualifier ('.')
can be used consistently when accessing all such data.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Mon, 13 Jul 2015 05:00:00 +0000 (00:00 -0500)]
library: also include a 'read' for slabnode_chain_fill
While meminfo does implement only the singular version
of 'xxxx_chain_fill', it was wrong to limit the 'read'
to the plural version (only) within our new slabs API.
This kind of inconsistency will only spell trouble for
future users of the new libprocps API. So, this commit
will mean that any form of xxxx_chain(s)_fill function
also includes a 'read', whereas xxx_getchain does not.
Jim Warner [Mon, 13 Jul 2015 05:00:00 +0000 (00:00 -0500)]
library: tweak new interface code and improve comments
With a little help from smatch, this commit eliminates
some inappropriate code. Also some programmer comments
were (barely) improved (i hope) in some small measure.
Reference(s):
smatch: 406 procps_meminfo_chain_fill() warn: variable dereferenced before check 'chain' (see line 403)
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Sat, 11 Jul 2015 05:00:00 +0000 (00:00 -0500)]
slabtop: adapted to exploit new alloc & sort interface
In addition to the new interface several other changes
were made. In fact, there are so many I must apologize
in advance to Craig, et al. for the hatchet I wielded.
Among the changes was my attempt to shrink the body of
that main() function. It's amazing how some folks must
always cram as code much as possible into ol' main().
Personally, unless it's a throwaway quick & dirty pgm,
all main function bodies should not exceed one screen.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Sat, 11 Jul 2015 05:00:00 +0000 (00:00 -0500)]
library: revised sort + new allocate APIs for slabinfo
With this patch, we will be close to an implementation
which will be needed when accommodating tasks/threads.
The following explanation was from an earlier message:
The slabtop requirements are similar to those of PIDs.
One must accommodate the variable number of slab nodes
(PIDs) while also accepting different data (char * and
unsigned long). Furthermore, some generalized means to
sort all that acquired stuff must somehow be provided.
------------------------------------------------------
So this patch expands the API to provide dynamic chain
allocation plus allow sorting of those dynamic chains.
While specific to slab needs (nodes, not global stats)
it is not too early to begin to think of newlib chains
as the opaque replacement for a deprecated old proc_t.
Better yet, any newlib chain is inherently variable in
length, something the old proc_t couldn't claim to be.
Of course, as we get to PIDs we'll want to grow/shrink
chains (easily accomplished with a special item enum).
And we'll want to grow/shrink those **head arrays too.
But these minor details don't seem insurmountable now.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Sat, 11 Jul 2015 05:00:00 +0000 (00:00 -0500)]
top: exploit that meminfo dynamic chain allocation API
The commit msg summary says it all (well, not really).
The previous statically allocated results chain served
the top program perfectly in all its lib memory needs.
But, someone needs to try out the brand new interface.
Besides, there were a few other changes which I wanted
to make. And among them were the following miscellany:
. some names were changed, like 'context' became 'ctx'
. an unnecessary redundant library call was eliminated
. the placement of a few globals was made more logical
( thanks Craig for following the capitalization rule )
Signed-off-by: Jim Warner <james.warner@comcast.net>
An earlier approach to meminfo chaining, referenced in
the patch shown below, represents the first baby steps
toward the goal of some generalized approach with PIDs
processing. However, statically allocating a chain for
each task or thread is totally impractical. And, while
a single chain could serve all PIDs, that would mean a
separate call to our library for each running process.
This commit is intended as the next evolutionary step,
dynamically allocating some 'result' chains to contain
as many or as few 'items' as a caller wishes. In other
words, holding only those 'items' of current interest.
This is the kind of service useful for both top and ps
programs if we finally get around to /proc/<PID> data.
Craig Small [Sat, 4 Jul 2015 04:59:59 +0000 (23:59 -0500)]
library: rebase & make current initial slabinfo effort
This was Craig's original patch, referenced below, but
it was never pushed to newlib. It has now been rebased
on top of some diskstat stuff to serve as a beginning.
The original effort was perfectly serviceable (after a
memory leak was fixed) but the approach would not have
served future PID needs when that proc_t went bye bye.
The slabtop requirements are similar to those of PIDs.
One must accommodate the variable number of slab nodes
(PIDs) while also accepting different data (char * and
unsigned long). Furthermore, some generalized means to
sort all that acquired stuff must somehow be provided.
So I wanted to try a different approach that seemed to
hold potential for satisfying future top and ps needs.
Subsequent commits will make that attempt, building on
Craig's original patch whose commit msg appears below.
------------------------------------------------------
All of the /proc/slabinfo related calls have been changed
here. They follow the same procps_slabinfo_* format.
Made both the slabtop and vmstat programs use the new
API as one was using the old one and one was just sort
of trying to do its own thing.
Sorting of slabnodes is also possible via the library.
Craig Small [Tue, 7 Jul 2015 12:42:06 +0000 (22:42 +1000)]
library: Update diskstat API
The calls for reading diskstat have been moved out of
sysinfo and into new files diskstat.[ch] These new
library calls follow the standard pattern for the
new libprocps.
vmstat is updated to use the new API and also got
the weighted IO time added.
vmstat -p previously would only show partitions, not
disks. There does not appear to be any good reason to
artifically deny a user to use this command on a disk,
rather than a partition so this restriction was lifted.
I also realised using int for devid means you can send
the library negative numbers, the index uses unsigned int.
Other similiar calls will need to be fixed too.
Craig Small [Thu, 2 Jul 2015 10:54:11 +0000 (20:54 +1000)]
library: remove procps_pagesize_get()
This is actually a systemcall getpagesize(2) or it is defined
in configure using a variety of methods, including a default
hard coded value as a last resort.
Jim Warner [Tue, 30 Jun 2015 05:00:00 +0000 (00:00 -0500)]
top: tweak newlib interface, as more experience gained
Now that the dust is settling following an initial API
library effort, it is apparent my naming standards may
not have always been observed. This was a minor crime,
since those standards are unwritten (& not apparent?).
Basically, top has always capitalized the first letter
of global variables in an effort to distinguish global
definitions from local variables later in the program.
So this patch alters the new API variables to conform,
while also explicitly using 'context' for key structs.
Lastly, top now employs the new '#include <proc/name>'
conventions for the new/converted module header files.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Tue, 30 Jun 2015 05:00:00 +0000 (00:00 -0500)]
library: normalize the readstat context structure name
The new library meminfo & vmstat modules use structure
names for their context which exactly mirror the names
of the very /proc/ files whose particulars they yield.
The one exception to this rule was the readstat module
whose struct was named statinfo yet the file was stat.
This commit simply renames that structure (only) so as
to hopefully establish such a naming convention as our
standard going forward. And, it's makes good symmetry.
[ this module's name itself is just perfect as it is ]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Tue, 30 Jun 2015 05:00:00 +0000 (00:00 -0500)]
library: the uref functions were insufficiently robust
The earlier attempt at protecting these functions from
already freed memory worked just fine until the memory
was, in fact, reused by the OS. At that point, the ref
count would most likely fail an existing a test for 0.
So this commit will take control of the 'info' pointer
and force it to NULL when a reference count reaches 0.
Plus, since it makes little sense returning an address
that a caller already has, henceforth we will return a
reference count out of the 'ref' and 'unref functions.
Craig Small [Mon, 29 Jun 2015 11:52:51 +0000 (21:52 +1000)]
library: Remove signal name from library
Procps library previously held functions that were about either
listing or finding signal names. These are not really the right
location for a library about reading procfs.
This patch handles signal related functions in two ways:
For functions purely found in skill, these have been moved back
into this binary as they are used nowhere else.
For functions used across the binaries, these have been moved
into include/signals.h and lib/signals.c. Besides formatting,
these functions are largely the same.
To assist the skill functions, two functions to access the
signal map array have been added to lib/signals.c
Jim Warner [Sun, 28 Jun 2015 05:00:00 +0000 (00:00 -0500)]
top: exploit the new library API for cpu display needs
This commit is mostly about eliminating code, now that
a library is responsible for the cpu tics maintenance.
The top program will continue to provide numa support,
without involving the library in any of those details.
[ not to mention all the 'dl' and 'stderr' numa crap ]
With this transfer of the cpu tics duty to our library
the provision associated with the CPU_ZEROTICS #define
could not initially be migrated. The commit referenced
below suggests it may have lost its importance. In any
case such logic may yet be incorporated in the future.
But for now, that #define has been completely removed.
Jim Warner [Sun, 28 Jun 2015 05:00:00 +0000 (00:00 -0500)]
library: extend cpu jiff logic beyond cpu summary info
There was not a way I could see to support top's needs
for cpu information with the new 'chained' provisions.
The sheer quantity of such data plus the unpredictable
number of potential processors suggested a totally new
approach was warranted while keeping internals opaque.
So this patch introduces two new structures solely for
use by potential callers (as seen in the API). They're
responsible for providing them to the library which is
then responsible for filling them with requested data.
The top program will continue to provide numa support,
without involving the library in any of those details.
[ not to mention all the 'dl' and 'stderr' numa crap ]
With this transfer of the cpu tics duty to our library
the provision associated with the CPU_ZEROTICS #define
could not initially be migrated. The commit referenced
below suggests it may have lost its importance. In any
case such logic may yet be incorporated in the future.
But for now, that #define has been completely removed.
Jim Warner [Sun, 28 Jun 2015 05:00:00 +0000 (00:00 -0500)]
library: make reads & unref logic a little more robust
Since we are not using a higher level standard C fopen
all of the read requests were made signal sensitive as
that can result in a 'temporarily' failed i/o request.
Also, protection against some user calling the 'unref'
function on already free memory has been incorporated.
This will protect us from some nasty 'Abort' surprise.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Sun, 28 Jun 2015 05:00:00 +0000 (00:00 -0500)]
library: add chaining provisions to readstat cpu & sys
If a caller chooses to reduce the overhead of repeated
function calls, this commit provides for acquiring all
the desired information in just a single library call.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Sun, 28 Jun 2015 05:00:00 +0000 (00:00 -0500)]
library: tweak formatting for readstat header and code
This patch mostly just eliminates darn tab characters.
Plus the library function declarations and definitions
have been standardized. Most visibly, the input params
now have all been indented on their own separate line.
The following names were changed to more closely match
meminfo.c or provide a certain symmetry. Unfortunately
that also impacted some other pgms which were updated.
. 'procps_stat_get' evolved into 'procps_stat_get_sys'
. 'procps_stat_info' is now known as 'procps_statinfo'
[and just a little trailing whitespace was eliminated]
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Sun, 28 Jun 2015 05:00:00 +0000 (00:00 -0500)]
top: exploit the new library API for memory statistics
This commit represents the pioneering attempt at using
the concept of 'chained' library requests in an effort
to reduce function call overhead. It required exposing
no more implementation details than were already shown
through the individual calls, yet is satisfied in one.
It is just such an approach that will prove invaluable
when it comes time to access individual /proc/##/data.
Programs could 'chain' only those 'results' structures
representing their current view independent of all the
fields any such programs might be prepared to display.
Thus the standard 'read', which wouldn't apply to task
level data very well (or efficiently), can now become
a 'read_chain' whereby the former PROC_FILL flags need
can be satisfied & yield the minimum open/close calls.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Sun, 28 Jun 2015 05:00:00 +0000 (00:00 -0500)]
library: add chaining provisions to meminfo and vmstat
If a caller chooses to reduce the overhead of repeated
function calls, this commit provides for acquiring all
the desired information in just a single library call.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This patch fills in some missing fields which have top
dependencies. Additionally, I've tried to mirror those
calculations Jaromir added for release 3.3.10. The one
calculation that remains missing is 'available' memory
for some kernels. For this API, we'll use a fall-back.
Lastly the lxc safeguards which were recently added to
the old procps library were incorporated here as well.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Jim Warner [Sun, 28 Jun 2015 05:00:00 +0000 (00:00 -0500)]
library: tweak formatting style for meminfo and vmstat
This patch mostly just eliminates darn tab characters.
Plus the library function declarations and definitions
have been standardized. Most visibly, the input params
now have all been indented on their own separate line.
Signed-off-by: Jim Warner <james.warner@comcast.net>
Craig Small [Sun, 21 Jun 2015 08:22:28 +0000 (18:22 +1000)]
library: memory and vmstat API changes
Created new set of functions for meminfo related calls. Liked the
format of that better so changed vmstat around so the look similar.
Missed the makefile change for uptime so added it in now.
Craig Small [Sun, 21 Jun 2015 08:20:04 +0000 (18:20 +1000)]
library: uptime API changes
Removed the printf_uptime, binaries can do printf easily enough.
sprint_uptime split into two as there wasn't a lot of common
code
sprint_uptime(): old style uptime line
sprint_uptime_short(): short new style "uptime -p"
Hertz_hack needed this, no sane system uses the code (I think)
so just assume 100 like we do in FreeBSD.
Craig Small [Fri, 19 Jun 2015 21:43:02 +0000 (07:43 +1000)]
library: sysstat and vmstat api changes
Use the standard libc declarations.
For protecting the headers for C++ procps used to have its
own defines, this change makes them use the standard libc ones.
getstat() -> procps_stat_*
vminfo() -> procps_vmstat_*
These two components of the library now use the newer version of
the API with less exposed global variables. The old methods are
there for now.
Craig Small [Wed, 24 Jun 2015 12:27:24 +0000 (22:27 +1000)]
pwdx: Do not link to libprocps
pwdx doesn't actually use any of the libprocps functions but
it is linked because it is the default. This specific LDADD
removes that unrequired linking.
Jim Warner [Sat, 20 Jun 2015 05:00:00 +0000 (00:00 -0500)]
build-sys: tweak to prevent dirty tree with every make
Please let's stop the nls translation insanity. With a
one time push we can eliminate the dirty tree syndrome
which surfaces with every local build. Later, before a
release, the translations can be updated in final form
then pushed just 1 more time to the gitlab repository.
I'm tired of having to always re-issue this request in
order to circumvent the problem and thus prevent a too
broad commit (not to mention some nasty side effects).
Jim Warner [Sat, 20 Jun 2015 05:00:00 +0000 (00:00 -0500)]
top: sacrifice a redundant procps_linux_version() call
With the commit referenced below, the linux version is
no longer available via an external variable. So we'll
eliminate the extra superficial function call employed
at program end as part of a debugging (only) o/p spew.
[ the user will soon be returned to the command line ]
[ & he/she can run their own 'uname -r' if in doubt! ]
Craig Small [Fri, 19 Jun 2015 11:00:46 +0000 (21:00 +1000)]
library: Change linux version
Added function procps_linux_version() which used to be an
exported integer instead. Also changed the method of obtaining
the linux version (more correctly the os release) to use a specific
procfs entry. This works for both Linux and FreeBSD.
Jim Warner [Thu, 18 Jun 2015 05:00:00 +0000 (00:00 -0500)]
ps: exploit the simplified library interface for wchan
This patch was made necessary by those library changes
in support of recently revised/simplified wchan logic.
In addition, this commit eliminates a broken alternate
'namelist' provision which was intended to allow users
to specify a System.map file to be used in translating
addresses into function names. But, the real effect of
the now defunct 'N' and '-n' options was to indirectly
force addresses (not names) to be displayed since such
user named map files could not be successfully parsed.
Besides when the required FRAME_POINTER kconfig option
is absent there is no address to translate and when it
is present /proc/PID/wchan is already translated. Thus
an alternate mapping is unnecessary and inappropriate.
[ we'll forgive POSIX for documenting '-n namelist' ]
Jim Warner [Thu, 18 Jun 2015 05:00:00 +0000 (00:00 -0500)]
library: refactor and rely on modern kernels for wchan
Several Debian based distributions were recently found
to have omitted a kernel configuration option that had
the effect of rendering /proc/#/stat and /proc/#/wchan
useless for providing any 'sleeping in function' info.
That problem also prompted a reevaluation of the whole
approach to wchan matters which had grown increasingly
complex as our library evolved over the last 13 years.
The net result was a decision to rely on /proc/#/wchan
which arrived along with the 2.5 kernel. This then let
us vastly simplify the internal code plus the external
interface which will benefit both the top and ps pgms.
Craig Small [Thu, 18 Jun 2015 12:37:24 +0000 (22:37 +1000)]
library: remove procps_version functions
It doesn't make any sense to have the binary version strings
embedded into the library. The version strings are defined
already either in the Makefile or in include/c.h
Jim Warner [Sat, 13 Jun 2015 05:00:00 +0000 (00:00 -0500)]
library: add support for displaying LXC container name
This commit adds a lxc container name to every proc_t.
If a process is not running in a container, then a '-'
will be provided, making such a field always sortable.
Unlike other proc_t character pointers, lxc containers
will find many duplicate shared values. So rather than
strdup 'em (with a later free required upon reuse), we
try to keep track of those already seen and share that
address among all tasks running within each container.
We rely on the lines in the task's cgroup subdirectory
which may initially seem somewhat unsophisticated. But
the lxc library itself uses a similar approach when it
is called to list active containers. In that case, the
/proc/net/unix directory is parsed for the '/lxc' eye-
catcher, with potential complications from hashed path
and names that are too long (something we don't face).
[ too bad docker abandoned lxc - our commit won't do ]
[ anything for the users of those kind of containers ]
Jim Warner [Sat, 13 Jun 2015 00:00:00 +0000 (00:00 +0000)]
library: address memory aberration with LXC containers
Under a lxc container, the /proc/meminfo 'MemFree' and
'MemAvailable' amounts will be equal, unless memory is
being limited via cgroups in which case 'MemAvailable'
could exceed that for 'MemTotal'. And when a container
has been nested, there exist additional memory quirks.
A program might then display used or available amounts
greater than total memory (assuming unsigned honored),
or negative values (should a signed cast be employed).
This anomaly primarily impacted the top and free pgms.
Thus, two simple sanity checks have been introduced to
avoid any illogical kb_main_available or kb_main_used.
( Busybox top & free also display anomalous although )
( different results when running in a lxc container. )
Craig Small [Sat, 13 Jun 2015 05:13:39 +0000 (15:13 +1000)]
Skip tests where /proc/vmstat unreadable
testsuite would fail if /proc/vmstat was unreadable.
Issue #3 brought up by Mike Frysinger.
test script explicitly checks to see if it is readable and
sets these tests to unsupported if not.
Craig Small [Sat, 13 Jun 2015 05:04:31 +0000 (15:04 +1000)]
Create test process
For the test suite, procps used to use sleep which would just
create a process or two to test the tools against. Some setups
coreutils creates all programs including sleep into one blob which
means a lot of the tests fail, see issue #2
David Prévot [Sat, 23 May 2015 20:01:14 +0000 (16:01 -0400)]
procps: Add a zero-width break point in slabtop.1
It allows to distinguish the initial NAME (to be translated) with the
latter one (that must not be translated) and thus permits to handle its
translation differently.
Recent commit 9742c74e7c522 ("pgrep: Enable case-insensitive process matching")
caused the "opts" string to overflow the show 32-character space allocated for
it.
Bump it up to 64 bytes, which should be enough even if more options are added.
Tested: Running ./pgrep stopped crashing and `make check` passed.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Craig Small [Wed, 13 May 2015 11:57:10 +0000 (11:57 +0000)]
Merge branch 'fix_parallel_build' into 'master'
build-sys: use proper dependencies on libproc.la
Use `LDADD` or `*_LDADD` instead of `AM_LDFLAGS` to refer to `libproc.la`.
This is recommended in the automake manual:
http://www.gnu.org/software/automake/manual/html_node/Linking.html
Before this commit, parallel builds may break, as there is no explicit dependency to ensure the library is built before the binaries that try to link to it.
Tested by running `make -jNN` repeatedly for different levels of parallelism to ensure the build works. Also checked that `make check` and `make distcheck` still work as expected. Also made sure that a parallel make invocation works with `make -j distcheck`.
Reported-by: Jim Warner <james.warner@comcast.net> Signed-off-by: Filipe Brandenburger <filbranden@google.com>
See merge request !2
Use LDADD or *_LDADD instead of AM_LDFLAGS to refer to libproc.la.
Otherwise, parallel builds will break as there is no explicit dependency
to ensure the library is built before the binaries that try to link to
it.
v2: Added empty rules lib_test_*_LDADD to remove the dependency on
libproc which is not used by the lib/test_* binaries.
Tested by running `make -jNN` repeatedly for different levels of
parallelism to ensure the build works. Also checked that `make check`
and `make distcheck` still work as expected. Also made sure that a
parallel make invocation works with `make -j distcheck`.
Reported-by: Jim Warner <james.warner@comcast.net> Signed-off-by: Filipe Brandenburger <filbranden@google.com>
William Orr [Sun, 10 May 2015 07:42:09 +0000 (17:42 +1000)]
pgrep: Enable case-insensitive process matching
FreeBSD has case-insensitive matching of processes in pgrep and
pkill, which can be super-useful. This patch uncomments and
documents the code needed to make this work.
Craig Small [Sun, 10 May 2015 07:23:54 +0000 (17:23 +1000)]
docs: Updated documentation
Updated the documents with the following general changes:
* Replaced Gitorious with GitLab
* Moved translate stuff out of README
* Changed plain text to markdown (looks better on website)
tests: slabinfo should not be too strict about slab names
Before this commit, the test checking `vmstat -m` (slabinfo) output uses
a fairly strict regular expression that only allows alphanumeric
characters and a few exceptions such as "_", "-", "(" and ")".
However, recent kernels use a wider range of characters, such as ">".
For instance, see this Linux commit which creates a "page->ptl" slab:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/mm/memory.c?id=b35f1819acd9243a3ff7ad25b1fa8bd6bfe80fb2#n4283
Other patches for reporting slab usage per memcg include the names of
the cgroup in the slabinfo output, which can include additional
characters and use dots for abbreviation.
The check should not be so string, instead it could simply look for a
chain of non-whitespace characters and that should be enough.
Tested that `make check` is still working, including in some of the
environments where features that enable the additional slabinfo names.
Signed-off-by: Filipe Brandenburger <filbranden@google.com> Signed-off-by: Craig Small <csmall@enc.com.au>
tests: fix regexp in ps_sched_batch.exp to match in first line
The current regexp checks for a \s+ in the beginning, however that will
only match if there is a \n in the `ps` output before test-schedbatch,
but that will not happen if test-schedbatch is the first process in the
list, which happens if the PID of test-schedbatch is low enough to bring
it up in the sorted list.
Fix it by enabling newline-sensitive matching with (?n) which then
allows using ^ and $ anchors in the regexp (including an optional \r
introduced by expect.) Matching the end of line also improves checking
that the last field matches 18 exactly and not something like 181, etc.
Tested that `make check` does not break and also fixed the flakiness
seen in an environment with few processes running under the test user
which made the issue more frequent.
Signed-off-by: Filipe Brandenburger <filbranden@google.com> Signed-off-by: Craig Small <csmall@enc.com.au>
Right now the test case is both testing it (expect_pass "$test") and
marking it as untested (untested "$test"), it should do either one or
the other, so stop marking it as untested.
Before this change, these lines appear in testsuite/ps.log or the output
of `make check RUNTESTFLAGS="--all"`:
Craig Small [Sat, 9 May 2015 07:53:08 +0000 (17:53 +1000)]
pgrep SID=1 is valid
On most systems the only process with a SID=1 is init
and certainly not a test sleep. On docker systems this
test program IS on SID=1 and so our "impossible SID" becomes
possible.
build-sys: install binaries in bindir (get rid of usrbin_execdir)
The "usrbin_execdir" hack meant to install some binaries in /bin and
others in /usr/bin. However:
- It is very inflexible: not much control on the final directory name
and it is not possible to get rid of the usr/bin suffix without
patching the build system.
- It is hard to use: it requires configure to receive --exec_prefix=/
and other settings do not make much sense. It is not very obvious that
that setting needs to be passed and it takes a while to figure it out.
- It produces garbage with the default setup: the default prefix of
/usr/local ends up installing the binaries under /usr/local/usr/bin
which does not make any sense.
Furthermore, the requirement to split binaries in /bin and /usr/bin is
not that strong since some distributions adopted the /usr merge and so
would agree to just deploy all binaries to /usr/bin directly.
Distributions that would still like to split /bin from /usr/bin should
actually move binaries such as `ps` and `kill` to /bin after the install
of procps-ng is complete. After all, they are the ones responsible for
determining what are the binaries that need to be in the root partition
and that list depends on their early boot init scripts, so it is
possible that the list must be augmented with other binaries from this
package.
Therefore, I propose here to get rid of that hack and simply install all
the binaries to bindir instead, which solves the problems described
above and simplifies the build and install of procps-ng.
Tested that it builds and both `make check` and `make distcheck` work.
Tested that `make install` works and produces the expected tree, the
only difference being the absence of the bogus /usr/local/usr/bin
directory and now all binaries are merged into /usr/local/bin as
expected.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Otherwise, automake 1.14 will warn that this option will become the
default in an upcoming release, which will cause problems for the
procps-ng build.
Now that the automake rules were merged in the top level Makefile.am,
it is possible to enable "subdir-objects" without breaking the build or
the dist.
Tested that it builds and both `make check` and `make distcheck` work.
Tested that `make install` works and produces the same tree before and
after this change. Confirmed that binaries are also placed in the same
locations in the build tree.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
This will be required for subdir-objects, otherwise automake will have
problems with more than one Makefile.am having rules to build the same
files.
Tested that it builds and both `make check` and `make distcheck` work.
Tested `make install` and compared the tree with the one installed
before this commit, both installed the binaries to the same locations.
The binaries are also in the same location in the build tree (for
instance, ps/pscommand is still there.)
Checked the binaries for the correct libraries linked into them. Binary
sizes matched before and after this change.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
build-sys: drop unneeded $(top_srcdir) from source paths
This is cleaner and we need to match paths exactly when we enable the
subdir-objects automake option.
Out-of-tree builds still work since automake is smart to know these are
source files and that it needs to look for them in $(top_srcdir), so
there is no need to make this explicit.
Tested that it builds and both `make check` and `make distcheck` work.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
build-sys: split test cases in lib/ into their own files
In order to avoid compiling the same source files twice, with and
without the TEST_PROGRAM define.
Tested that the build still works and that `make distcheck` works as
expected.
Tested that the test_* programs in lib/ keep working. (Though they are
not really invoked by `make check` and in particular test_nsutils is
quite useless, test_fileutils also quite poor.)
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Craig Small [Fri, 3 Apr 2015 08:18:58 +0000 (19:18 +1100)]
free: Use IEC units
Free always used 1024 based units but used the confusing old style
kilo,mega etc.
This change changes the names to kibi,mebi for 1024 based divisors
and kilo,mega for 1000 based divisors or IEC units.
It also checks if you try to set two units, e.g free -k -m
Petabyte and Pebibyte have been added.
If you used to use the long options such as --mega these will now
actually print megabytes (they previously printed mebibytes).
The short options are being used on the IEC units
The loop that parses options has a of by one bug where the realloc
adds one byte, instead of one list element. This is exposed when
you try things like:
pgrep -t,,,,
projects / procps-ng / log