Jeff Trawick [Tue, 14 Nov 2000 12:00:44 +0000 (12:00 +0000)]
Get "make install" to work on Tru64.
With Tru64, make picks up a bad status from the child shell process
when it evaluates the "`echo ($static) | grep 'mod_so'` (see below),
causing make to bail out.
But that grep should always fail when "make install" runs in
modules/extra and unless we have mod_so it will fail when "make
install" runs in modules/standard.
The work-around is to explicitly ignore the exit status from the
grep.
Ryan Bloom [Tue, 14 Nov 2000 06:11:24 +0000 (06:11 +0000)]
Stop the default_handler from trying to deal with HEAD requests. By doing
this, the content-length filter can determine the C-L before we send the
response, and we get a better response.
Ryan Bloom [Tue, 14 Nov 2000 06:07:40 +0000 (06:07 +0000)]
Make the header filter decide if a body should be sent. This gives us a
chance to compute the proper content-length before we try to send a set
of headers. If a handler wants to ignore the HEAD method, then it can
either just return from the handler function or pass an EOS bucket down
the filter stack. Either method will still get the headers sent to the
client.
This change allows handlers to actually run the request like it is a GET
request. The core itself will then ensure that no body is sent. This
allows us to get more information about the request before sending out the
headers for the HEAD request.
Ryan Bloom [Tue, 14 Nov 2000 04:52:33 +0000 (04:52 +0000)]
If the content-length is zero, then we don't output the Content-Length
header file. The only time that the C-L should be zero is if there is
no body. Zero is a valid content-length, but the only time that we ever
really send it is on a HEAD request right now, and that is incorrect.
The HEAD response should have the actual content's length.
Ryan Bloom [Tue, 14 Nov 2000 04:22:03 +0000 (04:22 +0000)]
Associate a pool with the pool bucket so that it serves it's intended
purpose. This also moves the create_pool function outside of an if to
decrease complexity.
Ryan Bloom [Tue, 14 Nov 2000 01:55:26 +0000 (01:55 +0000)]
Port mod_info to 2.0. This is basically a complete re-write to use the
config tree instead of re-reading the config file. As a part of this
change, the config tree needs to be exposed to modules as ap_conftree.
Submitted by: Ryan Morgan <rmorgan@covalent.net>
Reviewed by: Ryan Bloom
Ryan Bloom [Tue, 14 Nov 2000 01:46:39 +0000 (01:46 +0000)]
We can not use heap buckets for data that was allocated out of a pool.
The basic problem is that when the pool is destroyed, the data will go
away unless it is in a pool bucket. If it is in a pool bucket, then the
data will be copied into a heap bucket when the pool is destroyed. This
becomes a real issue when we set some data off to the side to deal with
pipelined requests.
Bill Stoddard [Mon, 13 Nov 2000 22:52:19 +0000 (22:52 +0000)]
Update coalesce filter to use heap buckets rather than pool buckets. This should fix the
mod_autoindex funky chunking behaviour until the ap_r* routines are reimplemented, at which
time this filter should probably go away.
Ryan Bloom [Mon, 13 Nov 2000 14:19:41 +0000 (14:19 +0000)]
The core handler should never close a file, because we haven't actually
sent the file yet. This also removes the send_http_headers call, because
that's a no-op so it doesn't make much sense to leave it in.
Jeff Trawick [Mon, 13 Nov 2000 03:50:16 +0000 (03:50 +0000)]
Clean up some of the warnings from a Tru64 build, mostly due to
the recent apr_ssize_t->apr_size_t changes. The problem in mod_cgid
was an int function which didn't have a return statement.
Ryan Bloom [Mon, 13 Nov 2000 03:42:02 +0000 (03:42 +0000)]
Get SINGLE_LISTEN_UNSERIALIZED_ACCEPT working again. This defines that
macro on those platforms that have it defined in 1.3. The only platform
that doesn't work yet is Linux 2.2.
Jeff Trawick [Mon, 13 Nov 2000 03:18:18 +0000 (03:18 +0000)]
add apr_get_home_directory(), teach mod_userdir to use that
instead of calling getpwnam[_r] directly, back out mod_userdir's
config check for getpwnam_r
Ryan Bloom [Sat, 11 Nov 2000 06:06:00 +0000 (06:06 +0000)]
Not all platforms have INADDR_NONE defined by default. Apache used to
check for this and the define it if needed. Since APR also needs this
check it makes more sense for APR to just check and export a symobl that
is always available.
Submitted by: Branko �ibej <brane@xbc.nu>
Reviewed by: Ryan Bloom
Jeff Trawick [Fri, 10 Nov 2000 23:52:18 +0000 (23:52 +0000)]
Get mod_userdir compiling on FreeBSD when APR_HAS_THREADS.
This doesn't account for the fact that getpwnam() isn't
thread-safe on FreeBSD; it also doesn't account for systems
where getpwnam_r lives outside of libc.
See thread with subject "[?PATCH?] using getpwnam_r in mod_userdir"
in Nov. 2000 new-httpd for some better long-term ideas for how to
handle the problem.
Ryan Bloom [Fri, 10 Nov 2000 21:51:10 +0000 (21:51 +0000)]
MM has a bug that when you ask for a specific amount of shared memory
it allocates just that amount. But, MM actually uses some of it, so we
need to over allocate just a bit. On 32 bit machines 40 bytes is enough,
but on a 64 bit machine it isn't. So, we bump it up to 80 bytes until
MM fixes this bug.
Submitted by: David Hill <David.D.Hill@compaq.com>
Just some things I noticed letting someone else have some desktop time.
Guess homework isn't a bad sacrifice, actually read some docs :-)
Correct me if I'm wrong on the mod_auth_digest changes.
Tony Finch [Fri, 10 Nov 2000 01:34:46 +0000 (01:34 +0000)]
In mass hosting setups (using mod_vhost_alias or mod_rewrite) where
the hostname is interpolated into the filename, we need to be sure
that the result of interpolation doesn't expose parts of the
filesystem that should be private. This was done by checking the
syntax of the Host: header according to RFC 1123 and RFC 952. However,
many people have broken configurations that violate this syntax
(frequently because they use underscores in their names), and it also
doesn't accommodate the current effort to internationalize the DNS. I
don't think the former is a compelling reason to relax the syntax
checking, but the latter does justify this change.
The only RFC on internationalized DNS at the moment is RFC 2825 which
is an introduction to how difficult the whole thing is; the other
official documentation is a pile of Internet Drafts produced by the
Internationalized Domain Names Working Group of the IETF (with names
starting "draft-ietf-idn-"). However they have very little to say
about URIs, and the current Internet draft about internationalized
URIs (draft-masinter-url-i18n-05) has very little to say about
hostnames :-( On the gripping hand there is some useful information at
<http://www.apng.org/idns/> where there is some iDNS testbed work
going on. The basic idea is that although the format of the hostnames
in the DNS itself remains compatible with RFC 1123, the actual
hostname presented to the resolver is in UTF8, and therefore the
hostname in the URL and Host: header is also in UTF8.
This change relaxes the checking so that only character sequences that
are sensitive to the filesystem are rejected, i.e. forward slashes,
backward slashes, and sequences of more than one dot.
David Reid [Fri, 10 Nov 2000 00:58:25 +0000 (00:58 +0000)]
Bring the apr_in_addr type into line with naming conventions and make changes
where appropriate. At least on my system virtual hosts seem to still work :)
Ryan Bloom [Thu, 9 Nov 2000 22:05:40 +0000 (22:05 +0000)]
Remove MMAP handling from the default handler. MMAPs are created by the
file_bucket read function now. If we try to read from a file bucket and
it makes sense to convert that bucket to an MMAP, that just happens.
Per new-httpd discussions, this version of mod_autoindex has been set
aside as a test for rputs style backwards compatibility. It has really
horrid chunking charateristics, so it was the ideal nominee for the job.
Please refer to src/modules/standard/mod_autoindex.c for the complete
revision history. When rputs is entirely eliminated (if it ever is)
then this version should be eliminated.
David Reid [Thu, 9 Nov 2000 15:09:50 +0000 (15:09 +0000)]
Change the code to reflect the recent API changes...
Alter http_vhost.c to use the new apr_get_inaddr fucntion. Old code is still
there just in case it breaks. can someone check it who knows this stuff?
Greg Stein [Thu, 9 Nov 2000 12:48:17 +0000 (12:48 +0000)]
one more round of walker cleanup: remove some items that are internal to the
FS provider from the public API; bang up the FS internals for the
now-private items and mechanisms; a bit more revamp to the FS walker
top-level APIs to narrow in on obsoleting dav_walker_ctx.
Ryan Bloom [Thu, 9 Nov 2000 03:00:00 +0000 (03:00 +0000)]
The content-length filter needs to compute the length even if the
content-length has already been set. If we don't, then we won't know if
the content-length has changed because some other filter changed the
length of the actual data. We also ALWAYS want to calculate the content
length if we get the whole brigade in the first call to this function.
Jeff Trawick [Wed, 8 Nov 2000 20:00:35 +0000 (20:00 +0000)]
In the content-length+bytes-sent filter, only set the content length
if we decided to do so initially *and* we've seen all the data.
Prior to this change, for a http/1.1 request to mod_autoindex, the
unconditional call to ap_set_content_length() gave us the wrong
value (only taking into account the first brigade) and disabled
chunking.
David Reid [Wed, 8 Nov 2000 14:47:33 +0000 (14:47 +0000)]
This adds the APR_LOCAL/APR_REMOTE to APR and changes the apr_get/set_port
functions to use it. This is onyl the start and I'll pause a while before
I continue in case people really hate this. The patch can be backed out and
all evidence will be removed, but I think this makes maintaining/developing
the code easier in the long term.
David Reid [Wed, 8 Nov 2000 12:07:27 +0000 (12:07 +0000)]
More cleanup of apr_port_t stuff.
This file will need a lot of work as it's using a lot of "raw" information
from socket structures that won't work with IPv6. Needs to be abstracted out
and use APR instead.
Ryan Bloom [Wed, 8 Nov 2000 06:24:47 +0000 (06:24 +0000)]
The byte-ranges filter. This looks like it should work, but the
Acrobat plug-in doesn't like it for some reason. This does work better
than what we currently have, because at least it returns all of the
requested data. This basically removes all BUFFs from the byte-range
code and removes all of the byte-range code from the default-handler.
Byte-ranges are now handled by a filter, which makes sense, and it allows
us to handle byte-ranges for all requests, not just files.
Ryan Bloom [Tue, 7 Nov 2000 20:21:55 +0000 (20:21 +0000)]
Convert a lot of apr_ssize_t to apr_size_t. We don't ever accept or return
signed values in these integers, and we return the error codes directly,
so we should always report the number of bytes read/written correctly. If
we have an error, that is 0 bytes. If that is true, then using signed
values doesn't make any sense.
Ryan Bloom [Tue, 7 Nov 2000 18:09:47 +0000 (18:09 +0000)]
Remove the original ap_send_fd code. The filters have been working for a
while, and this is cluttering up the code. If it is really needed, it
can be found in CVS
Ryan Bloom [Tue, 7 Nov 2000 00:58:49 +0000 (00:58 +0000)]
Always compute the content-length regardless of whether it is sent to the
client or not. The reason for this, is that it allows us to log the
bytes sent to the client correctly. This also simplifies the
content-length filter a bit, by making it a single pass through the
brigade.
Ryan Bloom [Tue, 7 Nov 2000 00:33:48 +0000 (00:33 +0000)]
Remvoe AP_END_OF_BRIGADE. This definition didn't really mean anything,
because it didn't signify the end of the brigade, and it didn't signify
the end of a response. It ended up meaning flush the data, which can be
detemined with bucket type checks. This also makes the FLUSH and EOS
buckets have a 0 length, which makes a lot of code cleaner, because now we
can just add lengths and be sure they are all >=0.
projects / apache / log