Most of these were found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stefan Saasen [Fri, 12 Apr 2013 05:56:24 +0000 (15:56 +1000)]
Documentation: distinguish between ref and offset deltas in pack-format
eb32d236 introduced the OBJ_OFS_DELTA object that uses a relative offset to
identify the base object instead of the 20-byte SHA1 reference. The pack file
documentation only mentions the SHA1 based reference in its description of the
deltified object entry.
Update the pack format documentation to clarify that the deltified object
representation refers to its base using either a relative negative offset or
the absolute SHA1 identifier.
Signed-off-by: Stefan Saasen <ssaasen@atlassian.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The advice (consider use of -u when read_directory takes too long) is
separated into 3 different status_printf_ln() calls, and which brings
trouble for translators.
Since status_vprintf() called by status_printf_ln() can handle eol in
buffer, we could simply join these lines into one paragraph.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Wed, 10 Apr 2013 17:49:57 +0000 (19:49 +0200)]
archive: clarify explanation of --worktree-attributes
Make it a bit clearer that --worktree-attributes is about files in the
working tree (checked out files, possibly changed) and not the current
working directory ($PWD). Link to the ATTRIBUTES section, which has
more details.
Reported-by: Amit Bakshi <ambakshi@gmail.com> Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sun, 7 Apr 2013 15:45:03 +0000 (08:45 -0700)]
Merge branch 'jc/directory-attrs-regression-fix' into maint-1.8.1
A pattern "dir" (without trailing slash) in the attributes file
stopped matching a directory "dir" by mistake with an earlier change
that wanted to allow pattern "dir/" to also match.
* jc/directory-attrs-regression-fix:
t: check that a pattern without trailing slash matches a directory
dir.c::match_pathname(): pay attention to the length of string parameters
dir.c::match_pathname(): adjust patternlen when shifting pattern
dir.c::match_basename(): pay attention to the length of string parameters
attr.c::path_matches(): special case paths that end with a slash
attr.c::path_matches(): the basename is part of the pathname
Junio C Hamano [Thu, 4 Apr 2013 19:59:55 +0000 (12:59 -0700)]
Merge branch 'jk/peel-ref' into maint
* jk/peel-ref:
upload-pack: load non-tip "want" objects from disk
upload-pack: make sure "want" objects are parsed
upload-pack: drop lookup-before-parse optimization
Junio C Hamano [Wed, 3 Apr 2013 16:26:27 +0000 (09:26 -0700)]
Merge branch 'mg/gpg-interface-using-status' into maint
Verification of signed tags were not done correctly when not in C
or en/US locale.
* mg/gpg-interface-using-status:
pretty: make %GK output the signing key for signed commits
pretty: parse the gpg status lines rather than the output
gpg_interface: allow to request status return
log-tree: rely upon the check in the gpg_interface
gpg-interface: check good signature in a reliable way
Junio C Hamano [Wed, 3 Apr 2013 16:26:07 +0000 (09:26 -0700)]
Merge branch 'bc/commit-complete-lines-given-via-m-option' into maint
'git commit -m "$msg"' used to add an extra newline even when
$msg already ended with one.
* bc/commit-complete-lines-given-via-m-option:
Documentation/git-commit.txt: rework the --cleanup section
git-commit: only append a newline to -m mesg if necessary
t7502: demonstrate breakage with a commit message with trailing newlines
t/t7502: compare entire commit message with what was expected
Junio C Hamano [Wed, 3 Apr 2013 16:25:52 +0000 (09:25 -0700)]
Merge branch 'jc/describe' into maint
The "--match=<pattern>" option of "git describe", when used with
"--all" to allow refs that are not annotated tags to be used as a
base of description, did not restrict the output from the command to
those that match the given pattern.
* jc/describe:
describe: --match=<pattern> must limit the refs even when used with --all
Junio C Hamano [Wed, 3 Apr 2013 16:25:41 +0000 (09:25 -0700)]
Merge branch 'jk/alias-in-bare' into maint
An aliased command spawned from a bare repository that does not say
it is bare with "core.bare = yes" is treated as non-bare by mistake.
* jk/alias-in-bare:
setup: suppress implicit "." work-tree for bare repos
environment: add GIT_PREFIX to local_repo_env
cache.h: drop LOCAL_REPO_ENV_SIZE
Junio C Hamano [Wed, 3 Apr 2013 16:25:15 +0000 (09:25 -0700)]
Merge branch 'jk/empty-archive' into maint
"git archive" reports a failure when asked to create an archive out
of an empty tree. It would be more intuitive to give an empty
archive back in such a case.
* jk/empty-archive:
archive: handle commits with an empty tree
test-lib: factor out $GIT_UNZIP setup
Junio C Hamano [Wed, 3 Apr 2013 16:18:01 +0000 (09:18 -0700)]
Sync with 1.8.1 maintenance track
* maint-1.8.1:
Start preparing for 1.8.1.6
git-tag(1): we tag HEAD by default
Fix revision walk for commits with the same dates
t2003: work around path mangling issue on Windows
pack-refs: add fully-peeled trait
pack-refs: write peeled entry for non-tags
use parse_object_or_die instead of die("bad object")
avoid segfaults on parse_object failure
entry: fix filter lookup
t2003: modernize style
name-hash.c: fix endless loop with core.ignorecase=true
Junio C Hamano [Wed, 3 Apr 2013 15:37:39 +0000 (08:37 -0700)]
Merge branch 'ap/maint-diff-rename-avoid-overlap' into maint-1.8.1
* ap/maint-diff-rename-avoid-overlap:
tests: make sure rename pretty print works
diff: prevent pprint_rename from underrunning input
diff: Fix rename pretty-print when suffix and prefix overlap
Thomas Rast [Wed, 3 Apr 2013 14:27:14 +0000 (16:27 +0200)]
git-tag(1): we tag HEAD by default
The <commit>|<object> argument is actually not explained anywhere
(except implicitly in the description of an unannotated tag). Write a
little explanation, in particular to cover the default.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 1 Apr 2013 16:19:46 +0000 (09:19 -0700)]
Merge branch 'ap/maint-diff-rename-avoid-overlap' into maint
* ap/maint-diff-rename-avoid-overlap:
tests: make sure rename pretty print works
diff: prevent pprint_rename from underrunning input
diff: Fix rename pretty-print when suffix and prefix overlap
Junio C Hamano [Mon, 1 Apr 2013 16:19:30 +0000 (09:19 -0700)]
Merge branch 'tb/document-status-u-tradeoff' into maint
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
Junio C Hamano [Mon, 1 Apr 2013 16:19:04 +0000 (09:19 -0700)]
Merge branch 'da/downcase-u-in-usage' into maint
* da/downcase-u-in-usage:
contrib/mw-to-git/t/install-wiki.sh: use a lowercase "usage:" string
contrib/examples/git-remote.perl: use a lowercase "usage:" string
tests: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
Documentation/user-manual.txt: use a lowercase "usage:" string
templates/hooks--update.sample: use a lowercase "usage:" string
contrib/hooks/setgitperms.perl: use a lowercase "usage:" string
contrib/examples: use a lowercase "usage:" string
contrib/fast-import/import-zips.py: use spaces instead of tabs
contrib/fast-import/import-zips.py: fix broken error message
contrib/fast-import: use a lowercase "usage:" string
contrib/credential: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsexportcommit: use a lowercase "usage:" string
git-archimport: use a lowercase "usage:" string
git-merge-one-file: use a lowercase "usage:" string
git-relink: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
git-sh-setup: use a lowercase "usage:" string
Ramsay Jones [Tue, 26 Mar 2013 19:20:11 +0000 (19:20 +0000)]
cat-file: Fix an gcc -Wuninitialized warning
After commit cbfd5e1c ("drop some obsolete "x = x" compiler warning
hacks", 21-03-2013) removed a gcc specific hack, older versions of
gcc now issue an "'contents' might be used uninitialized" warning.
In order to suppress the warning, we simply initialize the variable
to NULL in it's declaration.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ramsay Jones [Tue, 26 Mar 2013 19:09:44 +0000 (19:09 +0000)]
fast-import: Fix an gcc -Wuninitialized warning
Commit cbfd5e1c ("drop some obsolete "x = x" compiler warning hacks",
21-03-2013) removed a gcc hack that suppressed an "might be used
uninitialized" warning issued by older versions of gcc.
However, commit 3aa99df8 ('fast-import: clarify "inline" logic in
file_change_m', 21-03-2013) addresses an (almost) identical issue
(with very similar code), but includes additional code in it's
resolution. The solution used by this commit, unlike that used by
commit cbfd5e1c, also suppresses the -Wuninitialized warning on
older versions of gcc.
In order to suppress the warning (against the 'oe' symbol) in the
note_change_n() function, we adopt the same solution used by commit 3aa99df8.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
the resulting archive would contain only "foo" and ".gitattributes",
not subdir. This was broken with a recent change that intended to
allow "subdir/ export-ignore" to also exclude the directory, but
instead ended up _requiring_ the trailing slash by mistake.
A pattern "subdir" should match any path "subdir", whether it is a
directory or a non-directory. A pattern "subdir/" insists that a
path "subdir" must be a directory for it to match.
This patch adds test not just for this simple case, but also for
deeper cross-directory cases, as well as cases with wildcards.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 28 Mar 2013 21:48:21 +0000 (17:48 -0400)]
dir.c::match_pathname(): pay attention to the length of string parameters
This function takes two counted strings: a <pattern, patternlen> pair
and a <pathname, pathlen> pair. But we end up feeding the result to
fnmatch, which expects NUL-terminated strings.
We can fix this by calling the fnmatch_icase_mem function, which
handles re-allocating into a NUL-terminated string if necessary.
While we're at it, we can avoid even calling fnmatch in some cases. In
addition to patternlen, we get "prefix", the size of the pattern that
contains no wildcard characters. We do a straight match of the prefix
part first, and then use fnmatch to cover the rest. But if there are
no wildcards in the pattern at all, we do not even need to call
fnmatch; we would simply be comparing two empty strings.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 28 Mar 2013 21:47:47 +0000 (17:47 -0400)]
dir.c::match_pathname(): adjust patternlen when shifting pattern
If we receive a pattern that starts with "/", we shift it
forward to avoid looking at the "/" part. Since the prefix
and patternlen parameters are counts of what is in the
pattern, we must decrement them as we increment the pointer.
We remembered to handle prefix, but not patternlen. This
didn't cause any bugs, though, because the patternlen
parameter is not actually used. Since it will be used in
future patches, let's correct this oversight.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 28 Mar 2013 21:47:28 +0000 (17:47 -0400)]
dir.c::match_basename(): pay attention to the length of string parameters
The function takes two counted strings (<basename, basenamelen> and
<pattern, patternlen>) as parameters, together with prefix (the
length of the prefix in pattern that is to be matched literally
without globbing against the basename) and EXC_* flags that tells it
how to match the pattern against the basename.
However, it did not pay attention to the length of these counted
strings. Update them to do the following:
* When the entire pattern is to be matched literally, the pattern
matches the basename only when the lengths of them are the same,
and they match up to that length.
* When the pattern is "*" followed by a string to be matched
literally, make sure that the basenamelen is equal or longer than
the "literal" part of the pattern, and the tail of the basename
string matches that literal part.
* Otherwise, use the new fnmatch_icase_mem helper to make
sure we only lookmake sure we use only look at the
counted part of the strings. Because these counted strings are
full strings most of the time, we check for termination
to avoid unnecessary allocation.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 28 Mar 2013 21:49:13 +0000 (17:49 -0400)]
attr.c::path_matches(): special case paths that end with a slash
The function is given a string that ends with a slash to signal that
the path is a directory to make sure that a pattern that ends with a
slash (i.e. MUSTBEDIR) can tell directories and non-directories
apart. However, the pattern itself (pat->pattern and
pat->patternlen) that came from such a MUSTBEDIR pattern is
represented as a string that ends with a slash, but patternlen does
not count that trailing slash. A MUSTBEDIR pattern "element/" is
represented as a counted string <"element/", 7> and this must match
match pathname "element/".
Because match_basename() and match_pathname() want to see pathname
"element" to match against the pattern <"element/", 7>, reduce the
length of the path to exclude the trailing slash when calling
these functions.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
John Keeping [Wed, 27 Mar 2013 15:58:50 +0000 (15:58 +0000)]
merge-tree: fix typo in merge-tree.c::unresolved
When calculating whether there is a d/f conflict, the calculation of
whether both sides are directories generates an incorrect references
mask because it does not use the loop index to set the correct bit.
Fix this typo.
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 26 Mar 2013 19:44:11 +0000 (12:44 -0700)]
Merge branch 'jk/mailsplit-maildir-muttsort' into maint
Sort filenames read from the maildir/ in a way that is more likely
to sort messages in the order the writing MUA meant to, by sorting
numeric segment in numeric order and non-numeric segment in
alphabetical order.
* jk/mailsplit-maildir-muttsort:
mailsplit: sort maildir filenames more cleverly
Junio C Hamano [Tue, 26 Mar 2013 19:43:25 +0000 (12:43 -0700)]
Merge branch 'jk/utf-8-can-be-spelled-differently' into maint
Some platforms and users spell UTF-8 differently; retry with the
most official "UTF-8" when the system does not understand the
user-supplied encoding name that are the common alternative
spellings of UTF-8.
* jk/utf-8-can-be-spelled-differently:
utf8: accept alternate spellings of UTF-8
Junio C Hamano [Tue, 26 Mar 2013 17:28:07 +0000 (10:28 -0700)]
attr.c::path_matches(): the basename is part of the pathname
The function takes two strings (pathname and basename) as if they
are independent strings, but in reality, the latter is always
pointing into a substring in the former.
Clarify this relationship by expressing the latter as an offset into
the former.
Junio C Hamano [Mon, 25 Mar 2013 20:48:39 +0000 (13:48 -0700)]
Merge branch 'jk/graph-c-expose-symbols-for-cgit' into maint
In the v1.8.0 era, we changed symbols that do not have to be global
to file scope static, but a few functions in graph.c were used by
CGit from sideways bypassing the entry points of the API the
in-tree users use.
* jk/graph-c-expose-symbols-for-cgit:
Revert "graph.c: mark private file-scope symbols as static"
Junio C Hamano [Mon, 25 Mar 2013 20:46:42 +0000 (13:46 -0700)]
Merge branch 'maint-1.8.1' into maint
* maint-1.8.1:
bundle: Add colons to list headings in "verify"
bundle: Fix "verify" output if history is complete
Documentation: filter-branch env-filter example
git-filter-branch.txt: clarify ident variables usage
git-compat-util.h: Provide missing netdb.h definitions
describe: Document --match pattern format
Documentation/githooks: Explain pre-rebase parameters
update-index: list supported idx versions and their features
diff-options: unconfuse description of --color
read-cache.c: use INDEX_FORMAT_{LB,UB} in verify_hdr()
index-format.txt: mention of v4 is missing in some places
Junio C Hamano [Mon, 25 Mar 2013 20:45:26 +0000 (13:45 -0700)]
Merge branch 'nd/doc-index-format' into maint-1.8.1
The v4 index format was not documented.
* nd/doc-index-format:
update-index: list supported idx versions and their features
read-cache.c: use INDEX_FORMAT_{LB,UB} in verify_hdr()
index-format.txt: mention of v4 is missing in some places
Junio C Hamano [Mon, 25 Mar 2013 19:51:50 +0000 (12:51 -0700)]
transport.c: help gcc 4.6.3 users by squelching compiler warning
To a human reader, it is quite obvious that cmp is assigned before
it is used, but gcc 4.6.3 that ships with Ubuntu 12.04 is among
those that do not get this right.
Kacper Kornet [Fri, 22 Mar 2013 18:38:19 +0000 (19:38 +0100)]
Fix revision walk for commits with the same dates
Logic in still_interesting function allows to stop the commits
traversing if the oldest processed commit is not older then the
youngest commit on the list to process and the list contains only
commits marked as not interesting ones. It can be premature when dealing
with a set of coequal commits. For example git rev-list A^! --not B
provides wrong answer if all commits in the range A..B had the same
commit time and there are more then 7 of them.
To fix this problem the relevant part of the logic in still_interesting
is changed to: the walk can be stopped if the oldest processed commit is
younger then the youngest commit on the list to processed.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 21 Mar 2013 21:57:48 +0000 (22:57 +0100)]
Documentation: merging a tag is a special case
When asking Git to merge a tag (such as a signed tag or annotated tag),
it will always create a merge commit even if fast-forward was possible.
It's like having --no-ff present on the command line.
It's a difference from the default behavior described in git-merge.txt.
It should be documented as an exception of "FAST-FORWARD MERGE" section
and "--ff" option description.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com> Reviewed-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 21 Mar 2013 21:17:32 +0000 (14:17 -0700)]
CodingGuidelines: our documents are in AsciiDoc
Before talking about notations such as optional [--option] enclosed
in brackets, state that the documents are in AsciiDoc and processed
into other formats.
Max Nanasy [Thu, 21 Mar 2013 19:53:38 +0000 (12:53 -0700)]
diff.c: diff.renamelimit => diff.renameLimit in message
In the warning message printed when rename or unmodified copy
detection was skipped due to too many files, change "diff.renamelimit"
to "diff.renameLimit", in order to make it consistent with git
documentation, which consistently uses "diff.renameLimit".
Signed-off-by: Max Nanasy <max.nanasy@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 21 Mar 2013 11:05:28 +0000 (07:05 -0400)]
wt-status: fix possible use of uninitialized variable
In wt_status_print_change_data, we accept a change_type flag
that is meant to be either WT_STATUS_UPDATED or
WT_STATUS_CHANGED. We then switch() on this value to set
the local variable "status" for each case, but do not
provide a fallback "default" label to the switch statement.
As a result, the compiler realizes that "status" might be
unset, and complains with a warning. To silence this
warning, we use the "int status = status" trick. This is
correct with the current code, as all callers provide one of
the two expected change_type flags. However, it's also a
maintenance trap, as there is nothing to prevent future
callers from passing another flag, nor to document this
assumption.
Instead of using the "x = x" hack, let's handle the default
case in the switch() statement with a die("BUG"). That tells
the compiler and any readers of the code exactly what the
function's input assumptions are.
We could also convert the flag to an enum, which would
provide a compile-time check on the function input. However,
since these flags are part of a larger enum, that would make
the code unnecessarily complex (we would have to make a new
enum with just the two flags, and then convert it to the old
enum for passing to sub-functions).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 21 Mar 2013 15:44:39 +0000 (11:44 -0400)]
fast-import: clarify "inline" logic in file_change_m
When we read a fast-import line like:
M 100644 :1 foo.c
we point the local object_entry variable "oe" to the object
named by the mark ":1". When the input uses the "inline"
construct, however, we do not have such an object_entry.
The current code is careful not to access "oe" in the inline
case, but we can make the assumption even more obvious (and
catch violations of it) by setting oe to NULL and adding a
comment. As a bonus, this also squelches an over-zealous gcc
-Wuninitialized warning, which means we can drop the "oe =
oe" initialization hack.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / git / log