A number of the ARM intrinsics are aliased with alternative names in MSVC
compatibility mode. This change indicates those intrinsics to permit tablegen
to construct an appropriate list of MSBuiltins. With the corresponding change
in clang, these intrinsics can then be mapped from the frontend.
The tests to validate the intrinsics are aliased correctly will be added with
the corresponding clang change.
Alp Toker [Sat, 5 Jul 2014 03:03:21 +0000 (03:03 +0000)]
Deprecate IntrusiveRefCntPtr::getPtr() in favour of get()
This better aligns with other LLVM-specific and C++ standard library smart
pointer types.
In particular there are at least a few uses of intrusive refcounting in the
frontend where it's worth investigating std::shared_ptr as a more appropriate
alternative.
I don't think it is possible to test this directly since llvm-lto is not
a full linker and will not report duplicated symbols, but this fixes
bootstrap with gold and lto enabled.
Add MSBuiltin which is similar in vein to GCCBuiltin. This allows for adding
intrinsics for Microsoft compatibility to individual instructions. This is
needed to permit the creation of ARM specific MSVC extensions.
This is not currently in use, and requires an associated change in clang to
enable use of the intrinsics defined by this new class. This merely sets the
LLVM portion of the infrastructure in place to permit the use of this
functionality. A separate set of changes will enable the new intrinsics.
Daniel Sanders [Fri, 4 Jul 2014 15:16:14 +0000 (15:16 +0000)]
[mips] Add tests for the 'ret', 'call', and 'indirectbr' LLVM IR instruction.
Summary:
The tests in this directory are intended to test a single IR instruction
with as few dependencies on other instructions as possible. The aim is to
be very confident that each LLVM-IR instruction is implemented correctly and
with the optimal sequence of instructions, as well as to make it easy to tell
what is tested, and make it easier to bring up new ISA revisions in the
future. This gives us a good foundation on which to test bigger things.
These particular tests will allow testing that MIPS32r6/MIPS64r6 generate
the correct return instruction for returns, calls, and indirect branches.
This will be a bit tricky since the assembly text is identical but the
instruction is actually different. On MIPS32r6/MIPS64r6 'jr $rs' has been
removed in favour of the equivalent 'jalr $zero, $rs'. 'jr $rs' remains as
an alias for 'jalr $zero, $rs'.
Benjamin Kramer [Fri, 4 Jul 2014 12:36:05 +0000 (12:36 +0000)]
GlobalDCE: Delete available_externally initializers if it allows removing the value the initializer is referring to.
This is useful for functions that are not actually available externally but
referenced by a vtable of some kind. Clang emits functions like this for the MS
ABI.
Tim Northover [Fri, 4 Jul 2014 10:58:05 +0000 (10:58 +0000)]
ARM: when falling back to scattered relocs, keep the type.
The linker relies on relocation type info (e.g. is it a branch?) to perform the
correct actions, so we should keep that even when we end up using a scattered
relocation for whatever reason.
Tim Northover [Fri, 4 Jul 2014 10:57:56 +0000 (10:57 +0000)]
llvm-readobj: fix MachO relocatoin printing a bit.
There were two issues here:
1. At the very least, scattered relocations cannot use the same code to
determine the corresponding symbol being referred to. For some reason we
pretend there is no symbol, even when one actually exists in the symtab, so to
match this behaviour getRelocationSymbol should simply return symbols_end for
scattered relocations.
2. Printing "-" when we can't get a symbol (including the scattered case, but
not exclusively), isn't that helpful. In both cases there *is* interesting
information in that field, so we should print it. As hex will do.
Daniel Sanders [Fri, 4 Jul 2014 10:08:27 +0000 (10:08 +0000)]
[mips][mips64r6] Correct the encoding of dmuh, dmuhu, dmul, and dmulu.
We have detected a documentation bug in the encoding tables of the released
MIPS64r6 specification that has resulted in the wrong encodings being used for
these instructions in LLVM. This commit corrects them.
[x86] Generalize BuildVectorSDNode::getConstantSplatValue to work for
any constant, constant FP, or undef splat and to tolerate any undef
lanes in a splat, then replace all uses of isSplatVector in X86's
lowering with it.
This fixes issues where undef lanes in an otherwise splat vector would
prevent the splat logic from firing. It is a touch more awkward to use
this interface, but it is much more accurate. Suggestions for better
interface structuring welcome.
With this fix, the code generated with the widening legalization
strategy for widen_cast-4.ll is *dramatically* improved as the special
lowering strategies for a v16i8 SRA kick in even though the high lanes
are undef.
We also get a slightly different choice for broadcasting an aligned
memory location, and use vpshufd instead of vbroadcastss. This looks
like a minor win for pipelining and domain crossing, but a minor loss
for the number of micro-ops. I suspect its a wash, but folks can easily
tweak the lowering if they want.
Add an explicit bool operator to SDValue to make it easier to test for
a non-null node. In particular, this makes it easier to use condition
variables with SDValues, etc.
Silvermont can only decode one instruction per cycle if the instruction exceeds 8 bytes.
Also in Silvermont instructions with more than 3 prefixes will cause 3 cycle penalty.
Maximum nop length is limited to 7 bytes when used for padding on Silvermont.
For other x86 processors max nop length remains unchanged 15 bytes.
Move function dependent resetting of a subtarget variable out of the
subtarget. This involved having the movt predicate take the current
function - since we care about size in instruction selection for
whether or not to use movw/movt take the function so we can check
the attributes. This required adding the current MachineFunction to
FastISel and propagating through.
David Majnemer [Fri, 4 Jul 2014 00:23:39 +0000 (00:23 +0000)]
InstSimplify: Fix a bug when INT_MIN is in a sdiv
When INT_MIN is the numerator in a sdiv, we would not properly handle
overflow when calculating the bounds of possible values; abs(INT_MIN) is
not a meaningful number.
Instead, check and handle INT_MIN by reasoning that the largest value is
INT_MIN/-2 and the smallest value is INT_MIN.
gold plugin: move target initialization to the top of the onload function.
On at least my machine, ar does not register an all symbols read hook (which
previously triggered target initialization), but it does register a claim
files hook, which depends on the targets being initialized.
Temporarily revert "Don't try to construct debug LexicalScopes hierarchy for functions that do not have top level debug information." as it appears to be breaking some LTO constructs.
Remove caching of the target machine and initialization of the
subtarget from ARMISelDAGtoDAG. The former is unnecessary and the
latter is initialized on each runOnMachineFunction.
[CostModel][x86] Improved cost model for alternate shuffles.
This patch:
1) Improves the cost model for x86 alternate shuffles (originally
added at revision 211339);
2) Teaches the Cost Model Analysis pass how to analyze alternate shuffles.
Alternate shuffles are a special kind of blend; on x86, we can often
easily lowered alternate shuffled into single blend
instruction (depending on the subtarget features).
The existing cost model didn't take into account subtarget features.
Also, it had a couple of "dead" entries for vector types that are never
legal (example: on x86 types v2i32 and v2f32 are not legal; those are
always either promoted or widened to 128-bit vector types).
The new x86 cost model takes into account what target features we have
before returning the shuffle cost (i.e. the number of instructions
after the blend is lowered/expanded).
This patch also teaches the Cost Model Analysis how to identify and analyze
alternate shuffles (i.e. 'SK_Alternate' shufflevector instructions):
- added function 'isAlternateVectorMask';
- added some logic to check if an instruction is a alternate shuffle and, in
case, call the target specific TTI to get the corresponding shuffle cost;
- added a test to verify the cost model analysis on alternate shuffles.
Kevin Enderby [Thu, 3 Jul 2014 21:51:07 +0000 (21:51 +0000)]
Add the -just-symbol-name (aka -j) flag to llvm-nm to just print the
symbol’s name. On darwin the -j flag is used (often in combinations
with other flags) to produce a complete list of symbol names which
than can then be reorder and used with ld(1)’s -order_file.
This should allow llvm-ar to be used instead of gnu ar + plugin in a LTO
build. I will add a release note about it once I finish a LTO bootstrap with it.
Run interprocedural const prop before global optimizer
Exposes more constant globals that can be removed by
the global optimizer. A specific example is the removal
of the static global block address array in
clang/test/CodeGen/indirect-goto.c. This change impacts only
lower optimization levels. With LTO interprocedural
const prop runs already before global opt.
bug fix for PR20020: anti-dependency-breaker causes miscompilation
This patch sets the 'KeepReg' bit for any tied and live registers during the PrescanInstruction() phase of the dependency breaking algorithm. It then checks those 'KeepReg' bits during the ScanInstruction() phase to avoid changing any tied registers. For more details, please see comments in:
http://llvm.org/bugs/show_bug.cgi?id=20020
I added two FIXME comments for code that I think can be removed by using register iterators that include self. I don't want to include those code changes with this patch, however, to keep things as small as possible.
The test case is larger than I'd like, but I don't know how to reduce it further and still produce the failing asm.
Fix ppcf128 component access on little-endian systems
The PowerPC 128-bit long double data type (ppcf128 in LLVM) is in fact a
pair of two doubles, where one is considered the "high" or
more-significant part, and the other is considered the "low" or
less-significant part. When a ppcf128 value is stored in memory or a
register pair, the high part always comes first, i.e. at the lower
memory address or in the lower-numbered register, and the low part
always comes second. This is true both on big-endian and little-endian
PowerPC systems. (Similar to how with a complex number, the real part
always comes first and the imaginary part second, no matter the byte
order of the system.)
This was implemented incorrectly for little-endian systems in LLVM.
This commit fixes three related issues:
- When printing an immediate ppcf128 constant to assembler output
in emitGlobalConstantFP, emit the high part first on both big-
and little-endian systems.
- When lowering a ppcf128 type to a pair of f64 types in SelectionDAG
(which is used e.g. when generating code to load an argument into a
register pair), use correct low/high part ordering on little-endian
systems.
- In a related issue, because lowering ppcf128 into a pair of f64 must
operate differently from lowering an int128 into a pair of i64,
bitcasts between ppcf128 and int128 must not be optimized away by the
DAG combiner on little-endian systems, but must effect a word-swap.
[msan] Stop propagating shadow in blacklisted functions.
With this change all values passed through blacklisted functions
become fully initialized. Previous behavior was to initialize all
loads in blacklisted functions, but apply normal shadow propagation
logic for all other operation.
This makes blacklist applicable in a wider range of situations.
It also makes code for blacklisted functions a lot shorter, which
works as yet another workaround for PR17409.
[msan] Stop propagating shadow in blacklisted functions.
With this change all values passed through blacklisted functions
become fully initialized. Previous behavior was to initialize all
loads in blacklisted functions, but apply normal shadow propagation
logic for all other operation.
This makes blacklist applicable in a wider range of situations.
It also makes code for blacklisted functions a lot shorter, which
works as yet another workaround for PR17409.
[x86] Fix the completely broken vector widening legalization of bswap.
This operation was classified as a binary operation in the widening
logic for some reason (clearly, untested). It is in fact a unary
operation. Add a RUN line to a test to exercise this for x86.
Note that again the vector widening strategy doesn't regress anything
and in one case removes a totally unecessary instruction that we
couldn't avoid when promoting the element type.
[x86] Fix crashes in lowering bitcast instructions with the widening
mode.
This also runs the test in that mode which would reproduce the crash.
What I love is that *every single FIXME* in the test is addressed by
switching to widening.
[x86] Based on a long conversation between myself, Jim Grosbach, Hal
Finkel, Eric Christopher, and a bunch of other people I'm probably
forgetting (sorry), add an option to the x86 backend to widen vectors
during type legalization rather than promote them.
This still would promote vNi1 vectors to get the masks right, but would
widen other vectors. A lot of experiments are piling up right now
showing that widening should probably be the default legalization
strategy outside of vNi1 cases, but it is very hard to test the
rammifications of that and fix bugs in widening-based legalization
without an option that enables it. I'll be checking in tests shortly
that use this option to exercise cases where widening doesn't work well
and hopefully we'll be able to switch fully to this soon.
[codegen,aarch64] Add a target hook to the code generator to control
vector type legalization strategies in a more fine grained manner, and
change the legalization of several v1iN types and v1f32 to be widening
rather than scalarization on AArch64.
This fixes an assertion failure caused by scalarizing nodes like "v1i32
trunc v1i64". As v1i64 is legal it will fail to scalarize v1i32.
This also provides a foundation for other targets to have more granular
control over how vector types are legalized.
Patch by Hao Liu, reviewed by Tim Northover. I'm committing it to allow
some work to start taking place on top of this patch as it adds some
really important hooks to the backend that I'd like to immediately start
using. =]
Move subtarget dependent features into the subtarget from the target
machine. Includes a fix for a subtarget initialization for
hard floating point on mips16.
projects / llvm / log