Zola Bridges [Tue, 27 Nov 2018 19:56:46 +0000 (19:56 +0000)]
[clang][slh] add attribute for speculative load hardening
Summary:
Resubmit this with no changes because I think the build was broken
by a different diff.
-----
The prior diff had to be reverted because there were two tests
that failed. I updated the two tests in this diff
----- Summary from Previous Diff (Still Accurate) -----
LLVM IR already has an attribute for speculative_load_hardening. Before
this commit, when a user passed the -mspeculative-load-hardening flag to
Clang, every function would have this attribute added to it. This Clang
attribute will allow users to opt into SLH on a function by function basis.
This can be applied to functions and Objective C methods.
Richard Smith [Tue, 27 Nov 2018 19:33:49 +0000 (19:33 +0000)]
Don't speculatively emit VTTs for classes unless we are able to correctly emit references to all the functions they will (directly or indirectly) reference.
Summary:
This fixes a miscompile where we'd emit a VTT for a class that ends up
referencing an inline virtual member function that we can't actually
emit a body for (because we never instantiated it in the current TU),
which in a corner case of a corner case can lead to link errors.
Balazs Keri [Tue, 27 Nov 2018 18:36:31 +0000 (18:36 +0000)]
[ASTImporter] Added Import functions for transition to new API.
Summary:
These Import_New functions should be used in the ASTImporter,
and the old Import functions should not be used. Later the
Import_New should be renamed to Import again and the old Import
functions must be removed. But this can happen only after LLDB
was updated to use the new Import interface.
This commit is only about introducing the new Import_New
functions. These are not implemented now, only calling the old
Import ones.
Fix linker option for -fprofile-arcs -ftest-coverage
Summary:
Linux toolchain accidentally added "-u__llvm_runtime_variable" when "-fprofile-arcs -ftest-coverage", this is not added when "--coverage" option is used.
Using "-u__llvm_runtime_variable" generates an empty default.profraw file while an application built with "-fprofile-arcs -ftest-coverage" is running.
This reverts commit r347035 as it introduced assertion failures under
certain conditions. More information can be found here:
https://reviews.llvm.org/rL347035
Marco Antognini [Tue, 27 Nov 2018 14:54:58 +0000 (14:54 +0000)]
Derive builtin return type from its definition
Summary:
Prior to this patch, OpenCL code such as the following would attempt to create
a BranchInst with a non-bool argument:
if (enqueue_kernel(get_default_queue(), 0, nd, ^(void){})) /* ... */
This patch is a follow up on a similar issue with pipe builtin
operations. See commit r280800 and https://bugs.llvm.org/show_bug.cgi?id=30219.
This change, while being conservative on non-builtin functions,
should set the type of expressions invoking builtins to the
proper type, instead of defaulting to `bool` and requiring
manual overrides in Sema::CheckBuiltinFunctionCall.
In addition to tests for enqueue_kernel, the tests are extended to
check other OpenCL builtins.
Hans Wennborg [Tue, 27 Nov 2018 14:01:40 +0000 (14:01 +0000)]
Revert r347417 "Re-Reinstate 347294 with a fix for the failures."
This caused a miscompile in Chrome (see crbug.com/908372) that's
illustrated by this small reduction:
static bool f(int *a, int *b) {
return !__builtin_constant_p(b - a) || (!(b - a));
}
int arr[] = {1,2,3};
bool g() {
return f(arr, arr + 3);
}
$ clang -O2 -S -emit-llvm a.cc -o -
g() should return true, but after r347417 it became false for some reason.
This also reverts the follow-up commits.
r347417:
> Re-Reinstate 347294 with a fix for the failures.
>
> Don't try to emit a scalar expression for a non-scalar argument to
> __builtin_constant_p().
>
> Third time's a charm!
r347446:
> The result of is.constant() is unsigned.
r347480:
> A __builtin_constant_p() returns 0 with a function type.
r347512:
> isEvaluatable() implies a constant context.
>
> Assume that we're in a constant context if we're asking if the expression can
> be compiled into a constant initializer. This fixes the issue where a
> __builtin_constant_p() in a compound literal was diagnosed as not being
> constant, even though it's always possible to convert the builtin into a
> constant.
r347531:
> A "constexpr" is evaluated in a constant context. Make sure this is reflected
> if a __builtin_constant_p() is a part of a constexpr.
Gabor Marton [Tue, 27 Nov 2018 09:51:36 +0000 (09:51 +0000)]
[ASTImporter] Typedef import brings in the complete type
Summary:
When we already have an incomplete underlying type of a typedef in the
"To" context, and the "From" context has the same typedef, but the
underlying type is complete, then the imported type should be complete.
Fixes an assertion in CTU analysis of Xerces:
Assertion `DD && "queried property of class with no definition"' failed.
This assert is happening in the analyzer engine, because that attempts
to query an underlying type of a typedef, which happens to be
incomplete.
LLVM IR already has an attribute for speculative_load_hardening. Before
this commit, when a user passed the -mspeculative-load-hardening flag to
Clang, every function would have this attribute added to it. This Clang
attribute will allow users to opt into SLH on a function by function
basis.
This can be applied to functions and Objective C methods.
Reid Kleckner [Tue, 27 Nov 2018 02:21:51 +0000 (02:21 +0000)]
[MS] Push fewer DeclContexts for delayed template parsing
Only push the outermost record as a DeclContext when parsing a function
body. See the comments in Sema::getContainingDC about the way the parser
pushes contexts. This is intended to match the behavior the parser
normally displays where it parses all method bodies from all nested
classes at the end of the outermost class, when all nested classes are
complete.
----- Summary from Previous Diff (Still Accurate) -----
LLVM IR already has an attribute for speculative_load_hardening. Before
this commit, when a user passed the -mspeculative-load-hardening flag to
Clang, every function would have this attribute added to it. This Clang
attribute will allow users to opt into SLH on a function by function basis.
This can be applied to functions and Objective C methods.
Zola Bridges [Mon, 26 Nov 2018 19:41:14 +0000 (19:41 +0000)]
[clang][slh] add attribute for speculative load hardening
Summary:
LLVM IR already has an attribute for speculative_load_hardening. Before
this commit, when a user passed the -mspeculative-load-hardening flag to
Clang, every function would have this attribute added to it. This Clang
attribute will allow users to opt into SLH on a function by function basis.
This can be applied to functions and Objective C methods.
Alexey Bataev [Mon, 26 Nov 2018 18:37:09 +0000 (18:37 +0000)]
[OPENMP][NVPTX]Emit default locations with the correct Exec|Runtime
modes.
If the region is inside target|teams|distribute region, we can emit the
locations with the correct info for execution mode and runtime mode.
Patch adds this ability to the NVPTX codegen to help the optimizer to
produce better code.
Nemanja Ivanovic [Mon, 26 Nov 2018 14:35:38 +0000 (14:35 +0000)]
[PowerPC] Vector load/store builtins overstate alignment of pointers
A number of builtins in altivec.h load/store vectors from pointers to scalar
types. Currently they just cast the pointer to a vector pointer, but expressions
like that have the alignment of the target type. Of course, the input pointer
did not have that alignment so this triggers UBSan (and rightly so).
This resolves https://bugs.llvm.org/show_bug.cgi?id=39704
Sanjay Patel [Sun, 25 Nov 2018 17:53:16 +0000 (17:53 +0000)]
[CodeGen] translate MS rotate builtins to LLVM funnel-shift intrinsics
This was originally part of:
D50924
and should resolve PR37387:
https://bugs.llvm.org/show_bug.cgi?id=37387
...but it was reverted because some bots using a gcc host compiler
would crash for unknown reasons with this included in the patch.
Trying again now to see if that's still a problem.
Kristof Umann [Sat, 24 Nov 2018 12:24:27 +0000 (12:24 +0000)]
[analyzer] INT50-CPP. Do not cast to an out-of-range enumeration checker
This checker implements a solution to the "INT50-CPP. Do not cast to an
out-of-range enumeration value" rule [1].
It lands in alpha for now, and a number of followup patches are planned in order
to enable it by default.
Bill Wendling [Sat, 24 Nov 2018 10:45:55 +0000 (10:45 +0000)]
isEvaluatable() implies a constant context.
Assume that we're in a constant context if we're asking if the expression can
be compiled into a constant initializer. This fixes the issue where a
__builtin_constant_p() in a compound literal was diagnosed as not being
constant, even though it's always possible to convert the builtin into a
constant.
Fangrui Song [Sat, 24 Nov 2018 00:14:31 +0000 (00:14 +0000)]
[CodeComplete] Format SemaCodeComplete.cpp and improve code consistency
There are some mis-indented places and missing spaces here and there. Just format the whole file.
Also, newer code (from 2014 onwards) in this file prefers const auto *X = dyn_cast to not repeat the Decl type name. Make other occurrences consistent.
Remove two anonymous namespaces that are not very necessary: 1) a typedef 2) a local function (should use static)
[clang-format] Do not treat asm clobber [ as ObjCExpr, refined
Summary:
r346756 refined clang-format to not treat the `[` in `asm (...: [] ..)` as an
ObjCExpr. However that's not enough, as we might have a comma-separated list of
such clobbers as in the newly added test.
This updates the detection to instead look at the Line's first token being `asm`
and not mark `[`-s as ObjCExprs in this case.
Alexey Bataev [Wed, 21 Nov 2018 21:04:34 +0000 (21:04 +0000)]
[OPENMP][NVPTX]Emit default locations as constant with undefined mode.
For the NVPTX target default locations should be emitted as constants +
additional info must be emitted in the reserved_2 field of the ident_t
structure. The 1st bit controls the execution mode and the 2nd bit
controls use of the lightweight runtime. The combination of the bits for
Non-SPMD mode + lightweight runtime represents special undefined mode,
used outside of the target regions for orphaned directives or functions.
Should allow and additional optimization inside of the target regions.
Petr Hosek [Wed, 21 Nov 2018 20:33:12 +0000 (20:33 +0000)]
[Driver] Use --push/pop-state with Sanitizer link deps
Sanitizer runtime link deps handling passes --no-as-needed because of
PR15823, but it never undoes it and this flag may affect other libraries
that come later on the link line. To avoid this, wrap Sanitizer link
deps in --push/pop-state.
Alexey Bataev [Wed, 21 Nov 2018 19:41:10 +0000 (19:41 +0000)]
[OPENMP]Fix handling of the LCVs in loop-based directives.
Loop-control variables with the default data-sharing attributes should
not be captured in the OpenMP region as they are private by default.
Also, default attributes should be emitted for such variables in the
inner OpenMP regions for the correct data sharing during codegen.
Kelvin Li [Wed, 21 Nov 2018 19:10:48 +0000 (19:10 +0000)]
[OPENMP] Support relational-op != (not-equal) as one of the canonical
forms of random access iterator
In OpenMP 4.5, only 4 relational operators are supported: <, <=, >,
and >=. This work is to enable support for relational operator
!= (not-equal) as one of the canonical forms.
Petr Hosek [Wed, 21 Nov 2018 04:33:44 +0000 (04:33 +0000)]
[Driver] Link sanitizer runtime deps on Fuchsia when needed
Even though these deps weren't needed, this makes Fuchsia driver
better match other drivers, and it may be necessary when trying to
use different C libraries on Fuchsia.
clang::tooling::Diagnostic: Don't store offset in the scratch space.
These offsets are useless (and even harmful in certain cases) in exported
diagnostics. The test will be added to clang-tidy, since it's the main user of
the clang::tooling::Diagnostic class.
Sam McCall [Tue, 20 Nov 2018 22:06:54 +0000 (22:06 +0000)]
[CodeComplete] Penalize inherited ObjC properties for auto-completion
Summary:
Similar to auto-completion for ObjC methods, inherited properties
should be penalized / direct class and category properties should
be prioritized.
Note that currently, the penalty for using a result from a base class
(CCD_InBaseClass) is equal to the penalty for using a method as a
property (CCD_MethodAsProperty).
Joel E. Denny [Tue, 20 Nov 2018 22:05:23 +0000 (22:05 +0000)]
[OpenMP] Update CHECK-DAG usage in target_parallel_codegen.cpp
This patch adjusts a test not to depend on deprecated FileCheck
behavior that permits overlapping matches within a block of CHECK-DAG
directives. Thus, this patch also removes uses of FileCheck's
-allow-deprecated-dag-overlap command-line option.
There were two issues in this test:
1. There were sets of patterns for store instructions in which a
pattern X could match a superset of a pattern Y. While X appeared
before Y, Y's intended match appeared before X's intended match. The
result was that X matched Y's intended match. Under the old
overlapping behavior, Y also matched Y's intended match. Under the
new non-overlapping behavior, Y had nothing left to match. This patch
fixes this by gathering these sets in one place and putting the most
specific patterns (Y) before the more general patterns (X).
2. The CHECK-DAG patterns involving the variables CBPADDR3 and
CBPADDR4 were the same, but there was only one match in the text, so
CBPADDR4 patterns had nothing to match under the new non-overlapping
behavior. Moreover, a preceding related series of directives had
variables (SADDR0, BPADDR0, etc.) numbered only 0 through 4, but this
series had variables numbered 0 through 5. Assuming CBPADDR4's
directives were not intended, this patch removes them.
Joel E. Denny [Tue, 20 Nov 2018 22:04:45 +0000 (22:04 +0000)]
[OpenMP] Update CHECK-DAG usage in for_codegen.cpp
This patch adjusts a test not to depend on deprecated FileCheck
behavior that permits overlapping matches within a block of CHECK-DAG
directives. Thus, this patch also removes uses of FileCheck's
-allow-deprecated-dag-overlap command-line option.
Specifically, the FileCheck variables DBG_LOC_START, DBG_LOC_END, and
DBG_LOC_CANCEL were all set to the same value. As a result, three
TERM_DEBUG-DAG patterns, one for each variable, all matched the same
text under the old overlapping behavior. Under the new
non-overlapping behavior, that's not permitted. This patch's solution
is to replace these variables with one variable and replace these
patterns with one pattern.
Summary:
clang has `-Wextra-semi` (D43162), which is not dictated by the currently selected standard.
While that is great, there is at least one more source of need-less semis - 'null statements'.
Sometimes, they are needed:
```
for(int x = 0; continueToDoWork(x); x++)
; // Ugly code, but the semi is needed here.
```
But sometimes they are just there for no reason:
```
switch(X) {
case 0:
return -2345;
case 5:
return 0;
default:
return 42;
}; // <- oops
;;;;;;;;;;; <- OOOOPS, still not diagnosed. Clearly this is junk.
```
for (; // <- empty init-statement
int y : S())
;
}
As usual, things may or may not go sideways in the presence of macros.
While evaluating this diag on my codebase of interest, it was unsurprisingly
discovered that Google Test macros are *very* prone to this.
And it seems many issues are deep within the GTest itself, not
in the snippets passed from the codebase that uses GTest.
So after some thought, i decided not do issue a diagnostic if the semi
is within *any* macro, be it either from the normal header, or system header.
Aaron Ballman [Tue, 20 Nov 2018 15:23:07 +0000 (15:23 +0000)]
Update the documentation for attribute feature tests.
This clarifies that __has_cpp_attribute is no longer always an extension since it's now available in C++2a. Also, Both __has_cpp_attribute and __has_c_attribute can accept attribute scope tokens with alternative spelling (clang vs _Clang and gnu vs __gnu__).
Gabor Marton [Tue, 20 Nov 2018 14:19:39 +0000 (14:19 +0000)]
[ASTImporter] Set redecl chain of functions before any other import
Summary:
FunctionDecl import starts with a lookup and then we create a new Decl.
Then in case of CXXConstructorDecl we further import other Decls
(base classes, members through CXXConstructorDecl::inits()) before connecting
the redecl chain. During those in-between imports structural eq fails
because the canonical decl is different. This commit fixes this.
Synthesizing a test seemed extremely hard, however, Xerces analysis
reproduces the problem.
Vassil Vassilev [Tue, 20 Nov 2018 13:53:20 +0000 (13:53 +0000)]
Allow force updating the NumCreatedFIDsForFileID.
Our internal clients implement parsing cache based on FileID. In order for the
Preprocessor to reenter the cached FileID it needs to reset its
NumCreatedFIDsForFileID.
Bill Wendling [Tue, 20 Nov 2018 08:53:30 +0000 (08:53 +0000)]
Use is.constant intrinsic for __builtin_constant_p
Summary:
A __builtin_constant_p may end up with a constant after inlining. Use
the is.constant intrinsic if it's a variable that's in a context where
it may resolve to a constant, e.g., an argument to a function after
inlining.
Driver: SCS is compatible with every other sanitizer.
Because SCS relies on system-provided runtime support, we can use it
together with any other sanitizer simply by linking the runtime for
the other sanitizer.
Vedant Kumar [Mon, 19 Nov 2018 20:10:21 +0000 (20:10 +0000)]
[Sema] Fix PR38987: keep end location of a direct initializer list
If PerformConstructorInitialization of a direct initializer list constructor is
called while instantiating a template, it has brace locations in its BraceLoc
arguments but not in the Kind argument.
This reverts the hunk https://reviews.llvm.org/D41921#inline-468844.
Roman Lebedev [Mon, 19 Nov 2018 19:56:43 +0000 (19:56 +0000)]
[clang][CodeGen] Implicit Conversion Sanitizer: discover the world of CompoundAssign operators
Summary:
As reported by @regehr (thanks!) on twitter (https://twitter.com/johnregehr/status/1057681496255815686),
we (me) has completely forgot about the binary assignment operator.
In AST, it isn't represented as separate `ImplicitCastExpr`'s,
but as a single `CompoundAssignOperator`, that does all the casts internally.
Which means, out of these two, only the first one is diagnosed:
```
auto foo() {
unsigned char c = 255;
c = c + 1;
return c;
}
auto bar() {
unsigned char c = 255;
c += 1;
return c;
}
```
https://godbolt.org/z/JNyVc4
This patch does handle the `CompoundAssignOperator`:
```
int main() {
unsigned char c = 255;
c += 1;
return c;
}
```
```
$ ./bin/clang -g -fsanitize=integer /tmp/test.c && ./a.out
/tmp/test.c:3:5: runtime error: implicit conversion from type 'int' of value 256 (32-bit, signed) to type 'unsigned char' changed the value to 0 (8-bit, unsigned)
#0 0x2392b8 in main /tmp/test.c:3:5
#1 0x7fec4a612b16 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x22b16)
#2 0x214029 in _start (/build/llvm-build-GCC-release/a.out+0x214029)
```
However, the pre/post increment/decrement is still not handled.
Paul Robinson [Mon, 19 Nov 2018 18:29:28 +0000 (18:29 +0000)]
[DebugInfo] DISubprogram flags get their own flags word. NFC.
This will hold flags specific to subprograms. In the future
we could potentially free up scarce bits in DIFlags by moving
subprogram-specific flags from there to the new flags word.
This patch does not change IR/bitcode formats, that will be
done in a follow-up.
Zachary Turner [Mon, 19 Nov 2018 15:12:34 +0000 (15:12 +0000)]
Fix some issues with LLDB's lit configuration files.
Recently I tried to port LLDB's lit configuration files over to use a
on the surface, but broke some cases that weren't broken before and also
exposed some additional problems with the old approach that we were just
getting lucky with.
When we set up a lit environment, the goal is to make it as hermetic as
possible. We should not be relying on PATH and enabling the use of
arbitrary shell commands. Instead, only whitelisted commands should be
allowed. These are, generally speaking, the lit builtins such as echo,
cd, etc, as well as anything for which substitutions have been
explicitly set up for. These substitutions should map to the build
output directory, but in some cases it's useful to be able to override
this (for example to point to an installed tools directory).
This is, of course, how it's supposed to work. What was actually
happening is that we were bringing in PATH and LD_LIBRARY_PATH and then
just running the given run line as a shell command. This led to problems
such as finding the wrong version of clang-cl on PATH since it wasn't
even a substitution, and flakiness / non-determinism since the
environment the tests were running in would change per-machine. On the
other hand, it also made other things possible. For example, we had some
tests that were explicitly running cl.exe and link.exe instead of
clang-cl and lld-link and the only reason it worked at all is because it
was finding them on PATH. Unfortunately we can't entirely get rid of
these tests, because they support a few things in debug info that
clang-cl and lld-link don't (notably, the LF_UDT_MOD_SRC_LINE record
which makes some of the tests fail.
The high level changes introduced in this patch are:
1. Removal of functionality - The lit test suite no longer respects
LLDB_TEST_C_COMPILER and LLDB_TEST_CXX_COMPILER. This means there is no
more support for gcc, but nobody was using this anyway (note: The
functionality is still there for the dotest suite, just not the lit test
suite). There is no longer a single substitution %cxx and %cc which maps
to <arbitrary-compiler>, you now explicitly specify the compiler with a
substitution like %clang or %clangxx or %clang_cl. We can revisit this
in the future when someone needs gcc.
2. Introduction of the LLDB_LIT_TOOLS_DIR directory. This does in spirit
what LLDB_TEST_C_COMPILER and LLDB_TEST_CXX_COMPILER used to do, but now
more friendly. If this is not specified, all tools are expected to be
the just-built tools. If it is specified, the tools which are not
themselves being tested but are being used to construct and run checks
(e.g. clang, FileCheck, llvm-mc, etc) will be searched for in this
directory first, then the build output directory.
3. Changes to core llvm lit files. The use_lld() and use_clang()
functions were introduced long ago in anticipation of using them in
lldb, but since they were never actually used anywhere but their
respective problems, there were some issues to be resolved regarding
generality and ability to use them outside their project.
4. Changes to .test files - These are all just replacing things like
clang-cl with %clang_cl and %cxx with %clangxx, etc.
5. Changes to lit.cfg.py - Previously we would load up some system
environment variables and then add some new things to them. Then do a
bunch of work building out our own substitutions. First, we delete the
system environment variable code, making the environment hermetic. Then,
we refactor the substitution logic into two separate helper functions,
one which sets up substitutions for the tools we want to test (which
must come from the build output directory), and another which sets up
substitutions for support tools (like compilers, etc).
6. New substitutions for MSVC -- Previously we relied on location of
MSVC by bringing in the entire parent's PATH and letting
subprocess.Popen just run the command line. Now we set up real
substitutions that should have the same effect. We use PATH to find
them, and then look for INCLUDE and LIB to construct a substitution
command line with appropriate /I and /LIBPATH: arguments. The nice thing
about this is that it opens the door to having separate %msvc-cl32 and
%msvc-cl64 substitutions, rather than only requiring the user to run
vcvars first. Because we can deduce the path to 32-bit libraries from
64-bit library directories, and vice versa. Without these substitutions
this would have been impossible.
Sam McCall [Mon, 19 Nov 2018 13:37:46 +0000 (13:37 +0000)]
[FileManager] getFile(open=true) after getFile(open=false) should open the file.
Summary:
Old behavior is to just return the cached entry regardless of opened-ness.
That feels buggy (though I guess nobody ever actually needed this).
This came up in the context of clangd+clang-tidy integration: we're
going to getFile(open=false) to replay preprocessor actions obscured by
the preamble, but the compilation may subsequently getFile(open=true)
for non-preamble includes.
Kristof Umann [Sun, 18 Nov 2018 11:34:10 +0000 (11:34 +0000)]
[analyzer][UninitializedObjectChecker] Uninit regions are only reported once
Especially with pointees, a lot of meaningless reports came from uninitialized
regions that were already reported. This is fixed by storing all reported fields
to the GDM.
Jan Kratochvil [Sun, 18 Nov 2018 09:36:36 +0000 (09:36 +0000)]
cmake: z3: Remove EXACT from 4.7.1 after being compatible with 4.8.1
After check-in of D54391 a comment there by @mikhail.ramalho says:
Since we're supporting version 4.8.1 now, the cmake file should be changed to
"minimum" instead of "exact".
Calixte Denizet [Sat, 17 Nov 2018 19:41:39 +0000 (19:41 +0000)]
[Clang] Add options -fprofile-filter-files and -fprofile-exclude-files to filter the files to instrument with gcov (after revert https://reviews.llvm.org/rL346659)
Summary:
the previous patch (https://reviews.llvm.org/rC346642) has been reverted because of test failure under windows.
So this patch fix the test cfe/trunk/test/CodeGen/code-coverage-filter.c.
Petr Hosek [Fri, 16 Nov 2018 23:07:03 +0000 (23:07 +0000)]
[CMake] Use lld and llvm-objcopy for first stage compiler in Fuchsia
When cross-compiling the second stage to a different target, we need to
make sure that the first-stage compiler can produce binaries for that
target. Using lld and llvm-objcopy as the default linker and objcopy
tool eliminates some of the dependencies on the host toolchain.
projects / clang / log