Implement internally opaque bn access from rsa

Reviewed-by: Tim Hudson <tjh@openssl.org>

Implement internally opaque bn access from evp

Reviewed-by: Tim Hudson <tjh@openssl.org>

Implement internally opaque bn access from ec

Reviewed-by: Tim Hudson <tjh@openssl.org>

Implement internally opaque bn access from dsa

Reviewed-by: Tim Hudson <tjh@openssl.org>

Implement internally opaque bn access from dh

Reviewed-by: Tim Hudson <tjh@openssl.org>

Implement internally opaque bn access from asn1

Reviewed-by: Tim Hudson <tjh@openssl.org>

Prepare exptest for bn opaquify

Reviewed-by: Tim Hudson <tjh@openssl.org>

Prepare for bn opaquify. Implement internal helper functions.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove internal bn dependancies from speed.c

Reviewed-by: Tim Hudson <tjh@openssl.org>

Include <openssl/foo.h> instead of "foo.h"

Exported headers shouldn't be included as "foo.h" by code from the same
module, it should only do so for module-internal headers. This is
because the symlinking of exported headers (from include/openssl/foo.h
to crypto/foo/foo.h) is being removed, and the exported headers are
being moved to the include/openssl/ directory instead.

Change-Id: I4c1d80849544713308ddc6999a549848afc25f94
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fixed memory leak in the event of a failure of BUF_MEM_grow

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix memory leak in SSL_new if errors occur.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove fips directories from mkfiles.pl

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove references to deleted fips directory from Makefile.org

Reviewed-by: Tim Hudson <tjh@openssl.org>

remove OPENSSL_FIPSAPI

Reviewed-by: Tim Hudson <tjh@openssl.org>

remove FIPS_*_SIZE_T

Reviewed-by: Tim Hudson <tjh@openssl.org>

remove FIPS module code from crypto/evp

Reviewed-by: Tim Hudson <tjh@openssl.org>

remove FIPS module code from crypto/bn

Reviewed-by: Tim Hudson <tjh@openssl.org>

remove FIPS module code from crypto/ecdh

Reviewed-by: Tim Hudson <tjh@openssl.org>

remove FIPS module code from crypto/ecdsa

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove FIPS module code from crypto/dh

Reviewed-by: Tim Hudson <tjh@openssl.org>

remove FIPS module code from crypto/dsa

Reviewed-by: Tim Hudson <tjh@openssl.org>

remove FIPS module code from crypto/rsa

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove FIPS error library from openssl.ec mkerr.pl

Reviewed-by: Tim Hudson <tjh@openssl.org>

make depend

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove fips.h reference.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove fips_constseg references.

Reviewed-by: Tim Hudson <tjh@openssl.org>

remove another FIPSCANISTER reference

Reviewed-by: Tim Hudson <tjh@openssl.org>

remove unnecessary OPENSSL_FIPS reference

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove OPENSSL_FIPSCANISTER code.

OPENSSL_FIPSCANISTER is only set if the fips module is being built
(as opposed to being used). Since the fips module wont be built in
master this is redundant.
Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove FIPSCANISTERINTERNAL reference.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove fips utility build rules from test/Makefile

The fips test utilities are only build if an FIPS module is being
built from source. As this isn't done in master these are redundant.
Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove fipscanister build functionality from makefiles.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove fipscanister from Configure, delete fips directory

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove some unnecessary OPENSSL_FIPS references

FIPS_mode() exists in all versions of OpenSSL but always returns 0 if OpenSSL is not FIPS
capable.
Reviewed-by: Tim Hudson <tjh@openssl.org>

Add CHANGES entry for OCB

Reviewed-by: Tim Hudson <tjh@openssl.org>

Added OPENSSL_NO_OCB guards

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add documentation for OCB mode

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add tests for OCB mode

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add EVP support for OCB mode

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add support for OCB mode as per RFC7253

Reviewed-by: Tim Hudson <tjh@openssl.org>

Clarify the return values for SSL_get_shared_curve.

Reviewed-by: Matt Caswell <matt@openssl.org>

Add extra checks for odd-length EC curve lists.

Odd-length lists should be rejected everywhere upon parsing. Nevertheless,
be extra careful and add guards against off-by-one reads.

Also, drive-by replace inexplicable double-negation with an explicit comparison.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reject elliptic curve lists of odd lengths.

The Supported Elliptic Curves extension contains a vector of NamedCurves
of 2 bytes each, so the total length must be even. Accepting odd-length
lists was observed to lead to a non-exploitable one-byte out-of-bounds
read in the latest development branches (1.0.2 and master). Released
versions of OpenSSL are not affected.

Thanks to Felix Groebert of the Google Security Team for reporting this issue.

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix broken build

Add includes missing from commit 33eab3f6af51c6d7fe68ee4960930df4f1616bd5

Reviewed-by: Geoff Thorpe <geoff@openssl.org>

Replace GOST_R_MALLOC_FAILURE and GOST_R_NO_MEMORY with ERR_R_MALLOC_FAILURE

Reviewed-by: Richard Levitte <levitte@openssl.org>

capi_get_provname: Check return values

Reviewed-by: Richard Levitte <levitte@openssl.org>

ssl_create_cipher_list: check whether push onto cipherstack succeeds

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>

ssl_cert_dup: Fix memory leak

Always use goto err on failure and call ssl_cert_free() on the error path so all
fields and "ret" itself are freed

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>

dtls1_new: free s on error path

Reviewed-by: Richard Levitte <levitte@openssl.org>

dtls1_heartbeat: check for NULL after allocating s->cert->ctypes

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>

dtls1_process_heartbeat: check for NULL after allocating buffer

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>

capi_get_key: check for NULL after allocating key

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>

capi_cert_get_fname: check for NULL after allocating wfname

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>

capi_get_provname: free name on error if it was malloc'ed

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>

pkey_gost_mac_keygen: check for NULL after allocating keydata

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>

pkey_gost_ctrl: check for NULL after allocating pctx->shared_ukm

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Update changes to indicate that SSLv2 support has been removed

Reviewed-by: Matt Caswell <matt@openssl.org>

Remove incorrect code inadvertently introduced through commit 59669b6ab.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove SSLv2 support

The only support for SSLv2 left is receiving a SSLv2 compatible client hello.

Reviewed-by: Richard Levitte <levitte@openssl.org>

New location on website for binaries.

Reviewed-by: Bodo Moeller <bodo@openssl.org>

Remove "#if 0" code

Reviewed-by: Tim Hudson <tjh@openssl.org>

Only use the fallback mtu after 2 unsuccessful retransmissions if it is less
than the mtu we are already using

Reviewed-by: Tim Hudson <tjh@openssl.org>

Updates to s_client and s_server to remove the constant 28 (for IPv4 header
and UDP header) when setting an mtu. This constant is not always correct (e.g.
if using IPv6). Use the new DTLS_CTRL functions instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>

If we really get a situation where the underlying mtu is less than the minimum
we will support then dtls1_do_write can go into an infinite loop. This commit
fixes that.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Fix dtls_query_mtu so that it will always either complete with an mtu that is
at least the minimum or it will fail.
There were some instances in dtls1_query_mtu where the final mtu can end up
being less than the minimum, i.e. where the user has set an mtu manually. This
shouldn't be allowed. Also remove dtls1_guess_mtu that, despite having
logic for guessing an mtu, was actually only ever used to work out the minimum
mtu to use.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove instances in libssl of the constant 28 (for size of IPv4 header + UDP)
and instead use the value provided by the underlying BIO. Also provide some
new DTLS_CTRLs so that the library user can set the mtu without needing to
know this constant. These new DTLS_CTRLs provide the capability to set the
link level mtu to be used (i.e. including this IP/UDP overhead). The previous
DTLS_CTRLs required the library user to subtract this overhead first.

Reviewed-by: Tim Hudson <tjh@openssl.org>

There are a number of instances throughout the code where the constant 28 is
used with no explanation. Some of this was introduced as part of RT#1929. The
value 28 is the length of the IP header (20 bytes) plus the UDP header (8
bytes). However use of this constant is incorrect because there may be
instances where a different value is needed, e.g. an IPv4 header is 20 bytes
but an IPv6 header is 40. Similarly you may not be using UDP (e.g. SCTP).
This commit introduces a new BIO_CTRL that provides the value to be used for
this mtu "overhead". It will be used by subsequent commits.

Reviewed-by: Tim Hudson <tjh@openssl.org>

The first call to query the mtu in dtls1_do_write correctly checks that the
mtu that we have received is not less than the minimum. If its less it uses the
minimum instead. The second call to query the mtu does not do that, but
instead uses whatever comes back. We have seen an instance in RT#3592 where we
have got an unreasonably small mtu come back. This commit makes both query
checks consistent.

Reviewed-by: Tim Hudson <tjh@openssl.org>

The SSL_OP_NO_QUERY_MTU option is supposed to stop the mtu from being
automatically updated, and we should use the one provided instead.
Unfortunately there are a couple of locations where this is not respected.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Verify that we have a sensible message len and fail if not
RT#3592 provides an instance where the OPENSSL_assert that this commit
replaces can be hit. I was able to recreate this issue by forcing the
underlying BIO to misbehave and come back with very small mtu values. This
happens the second time around the while loop after we have detected that the
MTU has been exceeded following the call to dtls1_write_bytes.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Use the SSLv23 method by default

If SSLv2 and SSLv3 are both disabled we still support SSL/TLS.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove all .cvsignore files

Reviewed-by: Tim Hudson <tjh@openssl.org>

Check for FindNextFile when defining it rather than FindFirstFile

Reviewed-by: Matt Caswell <matt@openssl.org>

[PR3597] Advance to the next state variant when reusing messages.

Previously, state variant was not advanced, which resulted in state
being stuck in the st1 variant (usually "_A").

This broke certificate callback retry logic when accepting connections
that were using SSLv2 ClientHello (hence reusing the message), because
their state never advanced to SSL3_ST_SR_CLNT_HELLO_C variant required
for the retry code path.

Reported by Yichun Zhang (agentzh).

Signed-off-by: Piotr Sikora <piotr@cloudflare.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Correct some layout issues, convert all remaining tabs to appropriate amounts of spaces.

Reviewed-by: Matt Caswell <matt@openssl.org>

Improves the proxy certificates howto doc.

The current documentation contains a bunch of spelling and grammar mistakes. I also
found it hard to understand some paragraphs, so here is my attempt to improve its
readability.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix warning in ssl2_enc

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove more references to dtls1_enc

Reviewed-by: Richard Levitte <levitte@openssl.org>

Check EVP_Cipher return values for SSL2

Reviewed-by: Richard Levitte <levitte@openssl.org>

Delete unused file

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add checks to the return value of EVP_Cipher to prevent silent encryption failure.

PR#1767

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove redundant checks in ssl_cert_dup. This was causing spurious error messages when using GOST

PR#3613

Reviewed-by: Richard Levitte <levitte@openssl.org>

Tidy up ocsp help output

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Add documentation on -timeout option in the ocsp utility

PR#3612

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

NetWare compilation fix.

Workaround for NetWare CodeWarrior compiler which doesn't properly lookup
includes when in same directory as the C file which includes it.

PR#3569
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Updates to X509_NAME_get_index_by_NID.pod submitted by user Bernardh via the wiki
Minor changes made by Matt Caswell

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Updates to X509_NAME_add_entry_by_txt.pod submitted by user Bernardh via the wiki
Minor changes made by Matt Caswell.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Updates to EVP_PKEY_encrypt.pod submitted by user Bernardh via the wiki
Minor changes made by Matt Caswell.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Add include of ssl.h which is required by srtp.h

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Fixed memory leak due to incorrect freeing of DTLS reassembly bit mask

PR#3608

Reviewed-by: Tim Hudson <tjh@openssl.org>

Corrected comments in ssl.h about SSLv23_method and friends

PR#3574

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Print out Suite B status.

When using the -xcert option to test certificate validity print out
if we pass Suite B compliance. We print out "not tested" if we aren't
in Suite B mode.
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix SuiteB chain checking logic.

Reviewed-by: Matt Caswell <matt@openssl.org>

RT2679: Fix error if keysize too short

In keygen, return KEY_SIZE_TOO_SMALL not INVALID_KEYBITS.

** I also increased the minimum from 256 to 512, which is now
documented in CHANGES file. **

Reviewed-by: Matt Caswell <matt@openssl.org>

RT3488: Update doc for OPENSSL_config

Fix CONF_load_modules to CONF_modules_load.
Document that it calls exit.
Advise against using it now.
Add an error print to stderr.

Reviewed-by: Matt Caswell <matt@openssl.org>

Do not resume a session if the negotiated protocol version does not match
the session's version (server).

See also BoringSSL's commit bdf5e72f50e25f0e45e825c156168766d8442dde.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

When using EVP_PKEY_derive with a KDF set, a negative error from
ECDH_compute_key is silently ignored and the KDF is run on duff data

Thanks to github user tomykaira for the suggested fix.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Clean up CHANGES

Reviewed-by: Matt Caswell <matt@openssl.org>

Ensure SSL3_FLAGS_CCS_OK (or d1->change_cipher_spec_ok for DTLS) is reset
once the ChangeCipherSpec message is received. Previously, the server would
set the flag once at SSL3_ST_SR_CERT_VRFY and again at SSL3_ST_SR_FINISHED.
This would allow a second CCS to arrive and would corrupt the server state.

(Because the first CCS would latch the correct keys and subsequent CCS
messages would have to be encrypted, a MitM attacker cannot exploit this,
though.)

Thanks to Joeri de Ruiter for reporting this issue.

Reviewed-by: Matt Caswell <matt@openssl.org>