[ProfileSummary] Count callsite samples when computing total samples.
Summary: Currently ProfileSummaryBuilder doesn't count into callsite samples when computing total samples. Considering that ProfileSummaryInfo is used to checked the hotness of not only body samples but also callsite samples (from SampleProfileLoader), I think the callsite sample counts should be considered when computing total samples.
George Rimar [Wed, 3 Apr 2019 15:11:19 +0000 (15:11 +0000)]
[llvm-readobj] - Fix 2 test cases.
https://reviews.llvm.org/D60122 (r357595) changed the
symbols description format.
This change fix two more new test cases to fix BB:
http://lab.llvm.org:8011/builders/clang-with-thin-lto-ubuntu/builds/16205/steps/test-stage1-compiler/logs/stdio
[SystemZ] Improve codegen for certain SADDO-immediate cases
When performing an add-with-overflow with an immediate in the
range -2G ... -4G, code currently loads the immediate into a
register, which generally takes two instructions.
In this particular case, it is preferable to load the negated
immediate into a register instead, which always only requires
one instruction, and then perform a subtract.
I.e. symbols are grouped by their bindings. That is not very convenient,
because:
It does not allow to set a custom binding, what can be useful for producing
broken/special outputs for test cases. Adding a new binding would require to
change a syntax (what we observed when added GNUUnique recently).
It does not allow to change the order of the symbols in .symtab/.dynsym,
i.e. currently all Local symbols are placed first, then Global, Weak and GNUUnique
are following, but we are not able to change the order.
It is not consistent. Binding is just one of the properties of the symbol,
we do not group them by other properties.
It makes the code more complex that it can be. This patch shows it can be simplified
with the change performed.
The patch changes the syntax to just:
Symbols:
Symbol1:
...
Symbol2:
...
...
With that, we are able to work with the binding field just like with any other symbol property.
James Henderson [Wed, 3 Apr 2019 14:40:27 +0000 (14:40 +0000)]
[llvm-objcopy] Make section rename/set flags case-insensitive
This fixes https://bugs.llvm.org/show_bug.cgi?id=41305. GNU objcopy
--set-section-flags/--rename-section flags are case-insensitive, so this
patch updates llvm-objcopy to match.
The latest MTE specification adds register Xt to the STG instruction family:
STG [Xn, #offset] -> STG Xt, [Xn, #offset]
The tag written to memory is taken from Xt rather than Xn.
Also, the LDG instruction also was changed to read return address from Xt:
LDG Xt, [Xn, #offset].
This patch includes those changes and tests.
Specification is at: https://developer.arm.com/docs/ddi0596/c
Differential Revision: https://reviews.llvm.org/D60188
[DAGCombiner] loosen restrictions for moving shuffles after vector binop
There are 3 changes to make this correspond to the same transform in instcombine:
1. Remove the legality check - we can't create anything less legal than we started with.
2. Ease the use restriction, so we only bail out if both operands have >1 use.
3. Ease the use restriction for binops with a repeated operand (eg, mul x, x).
As discussed in D60150, there's a scalarization opportunity that will be made
easier by allowing this transform more generally.
[llvm-readobj] Add GNU style dumper for .gnu.version section
Summary: Currently, `llvm-readobj` do not support GNU style dumper for symbol versioning sections. In this patch, I would like to implement dumper for `.gnu.version` section
James Henderson [Wed, 3 Apr 2019 12:57:46 +0000 (12:57 +0000)]
[llvm-nm]Add support for --no-demangle
GNU nm has --no-demangle, so llvm-nm should too. It disables the
--demangle switch. The patch also allows --demangle to be specified
multiple times (the last of all --no-demangle/--demangle switches
takes precedence).
gn build: Add build files for clangd xpc framework code
This is a bit of a larger change since this is the first (and as far as
I can tell only) place where the LLVM build produces macOS framework
bundles.
GN has some built-in support for this, so use that.
`gn help create_bundle` has a terse description (but it's a bit
outdated: `deps` must be `public_deps` and the conditionals in the
example in the help aren't quite right on non-iOS).
We need a new 'copy_bundle_data' tool, and since we copy the clangd.xpc
bundle as bundle_data into ClangdXPC.framework it needs to be able to
handle directories in addition to files.
GN also insists we have a compile_xcassets tool even though it's not
used. I just made that run `false`.
Despite GN's support for bundles, we still need to manually create the
expected symlink structure in the .framework bundle. Since this code
never runs on Windows, it's safe to create the symlinks before the
symlink targets exist, so we can just make the bundle depend on the
steps that create the symlinks. For this to work, change the symlink
script to create the symlink's containing directory if it doesn't yet
exist.
I locally verified that CMake and GN build create the same bundle
structure. (I noticed that both builds set LC_ID_DYLIB to the pre-copy
libClangdXPCLib.dylib name, but that seems to not cause any issues and
it happens in the CMake build too.)
(Also add an error message to clangd-xpc-test-client for when loading
the dylib fails – this was useful while locally debugging this.)
Matt Arsenault [Wed, 3 Apr 2019 01:58:57 +0000 (01:58 +0000)]
AMDGPU: Assume ECC is enabled by default if supported
The test should really be checking for the property directly in the
code object headers, but there are problems with this. I don't see
this directly represented in the text form, and for the binary
emission this is depending on a function level subtarget feature to
emit a global flag.
[WebAssembly] Add Emscripten OS definition + small_printf
The Emscripten OS provides a definition of __EMSCRIPTEN__, and also that it
supports iprintf optimizations.
Also define small_printf optimizations, which is a printf with float support
but not long double (which in wasm can be useful since long doubles are 128
bit and force linking of float128 emulation code). This part is based on
sunfish's https://reviews.llvm.org/D57620 (which can't land yet since
the WASI integration isn't ready yet).
This change is in preparation for the addition of new target
operand flags for new relocation types. Have a symbol type as part
of the flag set makes it harder to use and AFAICT these are serving
no purpose.
Matt Arsenault [Wed, 3 Apr 2019 00:01:03 +0000 (00:01 +0000)]
AMDGPU: Fix names for generation features
We should overall stop using these, but the uppercase name didn't
work. Any feature string is converted to lowercase, so these
could never be found in the table.
[COFF] Reduce the size of Chunk and SectionChunk, NFC
Summary:
Reorder the fields in both to use padding more efficiently, and add more
comments on the purpose of the fields.
Replace `std::vector<SectionChunk*> AssociativeChildren` with a
singly-linked list. This avoids the separate vector allocation to list
associative children, and shrinks the 3 pointers used for the typically
empty vector down to 1.
In the end, this reduces the sum of heap allocations used to link
browser_tests.exe with NO PDB by 13.10%, going from 2,248,728 KB to
1,954,071 KB of heap. These numbers exclude memory mapped files, which
are of course a significant factor in LLD's memory usage.
[X86] Mark the default case of the X86InstrInfo::convertToThreeAddress switch as unreachable.
This function should only be called with instructions that are really convertible. And all
convertible instructions need to be handled by the switch. So nothing should use the default.
[X86] Check MI.isConvertibleTo3Addr() before calling convertToThreeAddress in X86FixupLEAs.
X86FixupLEAs just assumes convertToThreeAddress will return nullptr for any instruction that isn't convertible.
But the code in convertToThreeAddress for X86 assumes that any instruction coming in has at least 2 operands and that the second one is a register. But those properties aren't guaranteed of all instructions. We should check the instruction property first.
[TableGen] Properly calculate the minimum size needed or ConvertFn in GenAsmmatcher.inc files
We were using the number of Matchables rather than the number of rows in the converter table.
This only matters for a few of the targets where the number of matchables is more than 255, but the number of converters is less than 255. Many of the targets have more than 256 converters. So already required a uint16_t.
This adds partial instruction selection support for llvm.aarch64.stlxr. It also
factors out selection for G_INTRINSIC_W_SIDE_EFFECTS into its own function. The
new function removes the restriction that the intrinsic ID on the
G_INTRINSIC_W_SIDE_EFFECTS be on operand 0.
Also add a test, and add a GISel line to arm64-ldxr-stxr.ll.
In the bug test case the debug location was missing for the cmp instruction in
the "middle block" BB. This patch fixes the bug by copying the debug location
from the cmp of the scalar loop's terminator branch, if it exists.
The patch also fixes the debug location on the subsequent branch instruction.
It was previously using the location of the of the original loop's pre-header
block terminator. Both of these instructions will now map to the source line of
the conditional branch in the original loop.
A regression test has been added that covers these issues.
Stefan Pintilie [Tue, 2 Apr 2019 16:56:01 +0000 (16:56 +0000)]
[PowerPC] Fix reversed bit issue in DCMX mask for "xvtstdcdp" and "xvtstdcsp" P9 implementation
Did experiments on power 9 machine, checked the outputs for NaN & Infinity+
cases with corresponding DCMX bit set. Confirmed the DCMX mask bit for NaN and
infinity+ are reversed.
Philip Reames [Tue, 2 Apr 2019 16:51:43 +0000 (16:51 +0000)]
[WideableCond] Fix a nasty bug in detection of "explicit guards"
The code was failing to actually check for the presence of the call to widenable_condition. The whole point of specifying the widenable_condition intrinsic was allowing widening transforms. A normal branch is not widenable. A normal branch leading to a deopt is not widenable (in general).
I added a test case via LoopPredication, but GuardWidening has an analogous bug. Those are the only two passes actually using this utility just yet. Noticed while working on LoopPredication for non-widenable branches; POC in D60111.
[llvm-objcopy] Change SHT_NOBITS to SHT_PROBITS for some --set-section-flags
Summary:
Some flags accepted by --set-section-flags and --rename-section can change a SHT_NOBITS section to a SHT_PROGBITS section. Note that none of them can change a SHT_PROGBITS to SHT_NOBITS.
The full list (found via experimentation of individually setting each flag) that does this is: contents, load, noload, code, data, rom, and debug.
This was found by testing llvm-objcopy with the gnu binutils test suite, specifically this test case: https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob;f=binutils/testsuite/binutils-all/copy-1.d;h=f2b0d9e90df738c2891b4d5c7b62f62894b556ca;hb=HEAD
When we're cross-compiling, build and use a native llvm-nm instead of
attempting to use the one from the target's build tree.
A nice follow-up would be to add a cache variable to allow specifying a
path to an external native llvm-nm instead of building one ourselves,
similar to LLVM_TABLEGEN and LLVM_CONFIG_PATH.
Instead of duplicating functionality for building native versions of
tblgen and llvm-config, add a function to set up a native tool build.
This will also be used for llvm-nm in a follow-up.
This should be NFC for tblgen, besides the slightly different COMMENT
for the custom command (it'll display the tablegen target name instead
of always saying TableGen). For the native llvm-config, it's a behavior
change in that we'll use llvm_ExternalProject_BuildCmd instead of
constructing the build command manually, always build in Release, and
reference the correct binary path for multi-config generators. I believe
all of these changes to be bug fixes.
Summary:
When inserting an `unreachable` after a noreturn call, we must ensure
that it's not a musttail call to avoid breaking the IR invariants for
musttail calls.
[SampleProfile] Repeat indirect call promotion only when the target is actually hot.
Summary: It is possible that multiple indirect call targets have been promoted for a single callsite from the profiled binary. Current implementation repeats promotion for all these targets as far as the callsite itself is hot (the callsite is assumed to be hot if any one of these targets was "hot" during the profiling). However, even when one of the ICPed target is hot other targets may not, and we should not repeat promotion for "cold" targets.
Summary:
When inserting an `unreachable` after a noreturn call, we must ensure
that it's not a musttail call to avoid breaking the IR invariants for
musttail calls.
Jonas Paulsson [Tue, 2 Apr 2019 15:36:30 +0000 (15:36 +0000)]
[SystemZ] Improve instruction selection of 64 bit shifts and rotates.
For shift and rotate instructions that only use the last 6 bits of the shift
amount, a shift amount of (x*64-s) can be substituted with (-s). This saves
one instruction and a register:
Brian Gesiak [Tue, 2 Apr 2019 14:57:56 +0000 (14:57 +0000)]
[Transforms] Redundant getValueOperand (NFC)
`StoreInst::getValueOperand` is identical to `getOperand(0)`, so the call to
`getOperand(0)` can be replaced. Further, `SI->getValueOperand` is redundantly
called just a few lines down, despite its return value being stored in variable
`DV`. No functional change.
James Henderson [Tue, 2 Apr 2019 14:11:13 +0000 (14:11 +0000)]
[llvm-objcopy]Allow llvm-objcopy to be used on an ELF file with no section headers
This patch fixes https://bugs.llvm.org/show_bug.cgi?id=41293 and
https://bugs.llvm.org/show_bug.cgi?id=41045. llvm-objcopy assumed that
it could always read a section header string table. This isn't the case
when the sections were previously all stripped, and the e_shstrndx field
was set to 0. This patch fixes this. It also fixes a double space in an
error message relating to this issue, and prevents llvm-objcopy from
adding extra space for non-existent section headers, meaning that
--strip-sections on the output of a previous --strip-sections run
produces identical output, simplifying the test.
Simon Atanasyan [Tue, 2 Apr 2019 13:57:32 +0000 (13:57 +0000)]
[mips] Use AltOrders to prevent using odd FP-registers
To disable using of odd floating-point registers (O32 ABI and
-mno-odd-spreg command line option) such registers and their
super-registers added to the set of reserved registers. In general, it
works. But there is at least one problem - in case of enabled machine
verifier pass some floating-point tests failed because live ranges of
register units that are reserved is not empty and verification pass
failed with "Live segment doesn't end at a valid instruction" error
message.
There is D35985 patch which tries to solve the problem by explicit
removing of register units. This solution did not get approval.
I would like to use another approach for prevent using odd floating
point registers - define `AltOrders` and `AltOrderSelect` for MIPS
floating point register classes. Such `AltOrders` contains reduced set
of registers. At first glance, such solution does not break any test
cases and allows enabling machine instruction verification for all MIPS
test cases.
Pavel Labath [Tue, 2 Apr 2019 11:58:37 +0000 (11:58 +0000)]
Add minidump support to obj2yaml
Summary:
This patch adds the code needed to parse a minidump file into the
MinidumpYAML model, and the necessary glue code so that obj2yaml can
recognise the minidump files and process them.
There are various places in LLVM where the definition of StackID is not
properly honoured, for example in PEI where objects with a StackID > 0 are
allocated on the default stack (StackID0). This patch enforces that PEI
only considers allocating objects to StackID 0.
Hans Wennborg [Tue, 2 Apr 2019 08:01:38 +0000 (08:01 +0000)]
SimplifyCFG SinkCommonCodeFromPredecessors: Also sink function calls without used results (PR41259)
The code was previously checking that candidates for sinking had exactly
one use or were a store instruction (which can't have uses). This meant
we could sink call instructions only if they had a use.
That limitation seemed a bit arbitrary, so this patch changes it to
"instruction has zero or one use" which seems more natural and removes
the need to special-case stores.
The code doesn't actually need any of the information about the widenable condition at this level. The only thing we need is to ensure the WC call is the last thing anded in, and even that is a quirk we should really look to remove.
Eli Friedman [Tue, 2 Apr 2019 00:01:23 +0000 (00:01 +0000)]
[ARM] Optimize expressions like "return x != 0;" for Thumb1.
There's an existing optimization for x != C, but somehow it was missing
a special case for 0.
While I'm here, also cleaned up the code/comments a bit: the second
value produced by the MERGE_VALUES was actually dead, since a CMOV only
produces one result.
Eli Friedman [Mon, 1 Apr 2019 23:55:57 +0000 (23:55 +0000)]
[ARM] Don't try to create "push {r12, lr}" in Thumb1 at -Oz.
It's a little tricky to make this issue show up because
prologue/epilogue emission normally likes to push at least two
registers... but it doesn't when lr is force-spilled due to function
length. Not sure if that really makes sense, but I decided not to touch
it for now.
projects / llvm / log