[OpenCL] Ignore parentheses for sampler initialization
The sampler handling logic in SemaInit.cpp would inadvertently treat
parentheses around sampler arguments as an implicit cast, leading to
an unreachable "can't implicitly cast lvalue to rvalue with
this cast kind". Fix by ignoring parentheses once we are in the
sampler initializer case.
Balazs Keri [Mon, 12 Aug 2019 10:07:38 +0000 (10:07 +0000)]
[ASTImporter] Fix for import of friend class template with definition.
Summary:
If there is a friend class template "prototype" (forward declaration)
and later a definition for it in the existing code, this existing
definition may be not found by ASTImporter because it is not linked
to the prototype (under the friend AST node). The problem is fixed by
looping over all found matching decls instead of break after the first
found one.
Balazs Keri [Mon, 12 Aug 2019 07:15:29 +0000 (07:15 +0000)]
[CrossTU] Fix problem with CrossTU AST load limit and progress messages.
Summary:
Number of loaded ASTs is to be incremented only if the AST was really loaded
but not if it was returned from cache. At the same place the message about
a loaded AST is displayed.
Raphael Isemann [Sat, 10 Aug 2019 10:14:01 +0000 (10:14 +0000)]
[clang] Fixed x86 cpuid NSC signature
Summary:
The signature "Geode by NSC" for NSC vendor is wrong.
In lib/Headers/cpuid.h, signature_NSC_edx and signature_NSC_ecx constants are inverted (cpuid signature order is ebx # edx # ecx).
cfi-icall: Allow the jump table to be optionally made non-canonical.
The default behavior of Clang's indirect function call checker will replace
the address of each CFI-checked function in the output file's symbol table
with the address of a jump table entry which will pass CFI checks. We refer
to this as making the jump table `canonical`. This property allows code that
was not compiled with ``-fsanitize=cfi-icall`` to take a CFI-valid address
of a function, but it comes with a couple of caveats that are especially
relevant for users of cross-DSO CFI:
- There is a performance and code size overhead associated with each
exported function, because each such function must have an associated
jump table entry, which must be emitted even in the common case where the
function is never address-taken anywhere in the program, and must be used
even for direct calls between DSOs, in addition to the PLT overhead.
- There is no good way to take a CFI-valid address of a function written in
assembly or a language not supported by Clang. The reason is that the code
generator would need to insert a jump table in order to form a CFI-valid
address for assembly functions, but there is no way in general for the
code generator to determine the language of the function. This may be
possible with LTO in the intra-DSO case, but in the cross-DSO case the only
information available is the function declaration. One possible solution
is to add a C wrapper for each assembly function, but these wrappers can
present a significant maintenance burden for heavy users of assembly in
addition to adding runtime overhead.
For these reasons, we provide the option of making the jump table non-canonical
with the flag ``-fno-sanitize-cfi-canonical-jump-tables``. When the jump
table is made non-canonical, symbol table entries point directly to the
function body. Any instances of a function's address being taken in C will
be replaced with a jump table address.
This scheme does have its own caveats, however. It does end up breaking
function address equality more aggressively than the default behavior,
especially in cross-DSO mode which normally preserves function address
equality entirely.
Furthermore, it is occasionally necessary for code not compiled with
``-fsanitize=cfi-icall`` to take a function address that is valid
for CFI. For example, this is necessary when a function's address
is taken by assembly code and then called by CFI-checking C code. The
``__attribute__((cfi_jump_table_canonical))`` attribute may be used to make
the jump table entry of a specific function canonical so that the external
code will end up taking a address for the function that will pass CFI checks.
Reid Kleckner [Fri, 9 Aug 2019 19:49:14 +0000 (19:49 +0000)]
Don't diagnose errors when a file matches an include component
This regressed in r368322, and was reported as PR42948 and on the
mailing list. The fix is to ignore the specific error code for this
case. The problem doesn't seem to reproduce on Windows, where a
different error code is used instead.
CodeGen: ensure 8-byte aligned String Swift CF ABI
CFStrings should be 8-byte aligned when built for the Swift CF runtime
ABI as the atomic CF info field must be properly aligned. This is a
problem on 32-bit platforms which would give the structure 4-byte
alignment rather than 8-byte alignment.
This patch adds the SVE built-in types defined by the Procedure Call
Standard for the Arm Architecture:
https://developer.arm.com/docs/100986/0000
It handles the types in all relevant places that deal with built-in types.
At the moment, some of these places bail out with an error, including:
(1) trying to generate LLVM IR for the types
(2) trying to generate debug info for the types
(3) trying to mangle the types using the Microsoft C++ ABI
(4) trying to @encode the types in Objective C
(1) and (2) are fixed by follow-on patches but (unlike this patch)
they deal mostly with target-specific LLVM details, so seemed like
a logically separate change. There is currently no spec for (3) and
(4), so reporting an error seems like the correct behaviour for now.
The intention is that the types will become sizeless types:
The main purpose of the sizeless type extension is to diagnose
impossible or dangerous uses of the types, such as any that would
require sizeof to have a meaningful defined value.
Until then, the patch sets the alignments of the types to the values
specified in the link above. It also sets the sizes of the types to
zero, which is chosen to be consistently wrong and shouldn't affect
correctly-written code (i.e. code that would compile even with the
sizeless type extension).
The patch adds the common subset of functionality needed to test the
sizeless type extension on the one hand and to provide SVE intrinsic
functions on the other. After this patch, the two pieces of work are
essentially independent.
Johan Vikstrom [Fri, 9 Aug 2019 07:30:28 +0000 (07:30 +0000)]
[AST] No longer visiting CXXMethodDecl bodies created by compiler when method was default created.
Summary:
Clang generates function bodies and puts them in the AST for default methods if it is defaulted outside the class definition.
`
struct A {
A &operator=(A &&O);
};
A &A::operator=(A &&O) = default;
`
This will generate a function body for the `A &A::operator=(A &&O)` and put it in the AST. This body should not be visited if implicit code is not visited as it is implicit.
This was causing SemanticHighlighting in clangd to generate duplicate tokens and putting them in weird places.
Puyan Lotfi [Fri, 9 Aug 2019 04:55:09 +0000 (04:55 +0000)]
[clang][NFC] Consolidating usage of "FinalPhase" in Driver::BuildActions.
I am working to remove this concept of the "FinalPhase" in the clang driver,
but it is used in a lot of different places to do argument handling for
different combinations of phase pipelines and arguments. I am trying to
consolidate most of the uses of "FinalPhase" into its own separate scope.
Eventually, in a subsequent patch I will move all of this stuff to a separate
function, and have more of the complication phase list construction setup into
types::getComplicationPhases.
Qiu Chaofan [Fri, 9 Aug 2019 03:39:55 +0000 (03:39 +0000)]
[PowerPC] [Clang] Port SSE3, SSSE3 and SSE4 intrinsics to PowerPC
Port existing headers which include x86 intrinsics implementation to
PowerPC platform (using Altivec), along with tests. Also, tests about
including these intrinsic headers are combined.
The headers are mainly developed by Steven Munroe, with contributions
from Paul Clarke, Bill Schmidt, Jinsong Ji and Zixuan Wu.
Csaba Dabis [Fri, 9 Aug 2019 02:20:44 +0000 (02:20 +0000)]
[analyzer] ConditionBRVisitor: Fix HTML PathDiagnosticPopUpPieces
Summary:
A condition could be a multi-line expression where we create the highlight
in separated chunks. PathDiagnosticPopUpPiece is not made for that purpose,
it cannot be added to multiple lines because we have only one ending part
which contains all the notes. So that it cannot have multiple endings and
therefore this patch narrows down the ranges of the highlight to the given
interesting variable of the condition. It prevents HTML-breaking injections.
Reid Kleckner [Thu, 8 Aug 2019 21:35:03 +0000 (21:35 +0000)]
Fix up fd limit diagnosis code
Apparently Windows returns the "invalid argument" error code when the
path contains invalid characters such as '<'. The
test/Preprocessor/include-likely-typo.c test does this, so it was
failing after r368322.
Also, the diagnostic requires two arguments, so add the filename.
[clang][NFC] Move matcher ignoringElidableConstructorCall's tests to appropriate file.
Summary:
`ignoringElidableConstructorCall` is a traversal matcher, but its tests are
grouped with narrowing-matcher tests. This revision moves them to the correct
file.
Nico Weber [Thu, 8 Aug 2019 17:58:32 +0000 (17:58 +0000)]
clang: Diag running out of file handles while looking for files
clang would only print "file not found" when it's unable to find a
header file. If the reason for that is a file handle leak, that's not a
very useful error message. For errors that aren't in a small whitelist
("file not found", "file is directory"), print an error with the
strerror() output.
This changes behavior in corner cases: If clang was out of file handles
while looking in one -I dir but then suddenly wasn't when looking in the
next -I dir, and both directories contained a file with the desired
name, previously we'd silently return the file from the second
directory. For this reason, it's important to ignore "is a directory"
for this new diag: if a file foo/foo exists and -I -Ifoo are passed, an
include of "foo" should successfully open file "foo" in directory "foo/"
instead of complaining that "./foo" is a directory.
No test since we mostly hit this when there's a handle leak somewhere,
and currently there isn't one. I manually tested this with the repro
steps in comment 2 on the bug below.
[clang] Update `ignoringElidableConstructorCall` matcher to ignore `ExprWithCleanups`.
Summary:
The `ExprWithCleanups` node is added to the AST along with the elidable
CXXConstructExpr. If it is the outermost node of the node being matched, ignore
it as well.
Alexey Bataev [Thu, 8 Aug 2019 13:42:45 +0000 (13:42 +0000)]
[OPENMP]Add support for analysis of linear variables and step.
Summary:
Added support for basic analysis of the linear variables and linear step
expression. Linear loop iteration variables must be excluded from this
analysis, only non-loop iteration variables must be analyzed.
Rui Ueyama [Thu, 8 Aug 2019 07:04:01 +0000 (07:04 +0000)]
[diagtool] Use `operator<<(Colors)` to print out colored output.
r368131 introduced this new API to print out messages in colors.
If the colored output is disabled, `operator<<(Colors)` becomes nop.
No functionality change intended.
Fangrui Song [Thu, 8 Aug 2019 01:55:27 +0000 (01:55 +0000)]
[Driver] Move LIBRARY_PATH before user inputs
Fixes PR16786
Currently, library paths specified by LIBRARY_PATH are placed after inputs: `inputs LIBRARY_PATH stdlib`
In gcc, the order is: `LIBRARY_PATH inputs stdlib` if not cross compiling.
(On Darwin targets, isCrossCompiling() always returns false.)
Richard Trieu [Thu, 8 Aug 2019 00:12:51 +0000 (00:12 +0000)]
Update fix-it hints for std::move warnings.
Fix -Wpessimizing-move and -Wredundant-move when warning on initializer lists.
The new fix-it hints for removing the std::move call will now also suggest
removing the braces for the initializer list so that the resulting code will
still be compilable.
D65628 requires a flag to specify the number of threads for a clang-doc step. It would be good to use ExecutorConcurrency after exposing it instead of creating a new one that has the same purpose.
Alexey Bataev [Wed, 7 Aug 2019 14:02:11 +0000 (14:02 +0000)]
[OPENMP]Add standard macro value _OPENMP for OpenMP 5.0.
According to the OpenMP standard, compiler must define _OPENMP macro,
which has value in format yyyymm, where yyyy is the year of the standard
and mm is the month of the standard. For OpenMP 5.0 this value must be
set to 201811.
Balazs Keri [Wed, 7 Aug 2019 12:40:17 +0000 (12:40 +0000)]
[ASTImporter] Do not import FunctionTemplateDecl in record twice.
Summary:
For functions there is a check to not duplicate the declaration if it is in a
record (class). For function templates there was no similar check, if a
template (in the same class) was imported multiple times the
FunctionTemplateDecl was created multiple times with the same templated
FunctionDecl. This can result in problems with the declaration chain.
Matthias Gehre [Wed, 7 Aug 2019 10:45:36 +0000 (10:45 +0000)]
gsl::Owner/gsl::Pointer: Add implicit annotations for some std types
Summary:
Hard code gsl::Owner/gsl::Pointer for std types. The paper mentions
some types explicitly. Generally, all containers and their iterators are
covered. For iterators, we cover both the case that they are defined
as an nested class or as an typedef/using. I have started to test this
implementation against some real standard library implementations, namely
libc++ 7.1.0, libc++ 8.0.1rc2, libstdc++ 4.6.4, libstdc++ 4.8.5,
libstdc++ 4.9.4, libstdc++ 5.4.0, libstdc++ 6.5.0, libstdc++ 7.3.0,
libstdc++ 8.3.0 and libstdc++ 9.1.0.
The tests are currently here
https://github.com/mgehre/llvm-project/blob/lifetime-ci/lifetime-attr-test.sh
https://github.com/mgehre/llvm-project/blob/lifetime-ci/lifetime-attr-test.cpp
I think due to their dependency on a standard library, they are not a good fit
for clang/test/. Where else could I put them?
Puyan Lotfi [Tue, 6 Aug 2019 23:25:34 +0000 (23:25 +0000)]
[clang][DirectoryWatcher][NFC] Swapping asserts for llvm fatal_error in create
I also have replaced all the instances of
"auto DW = DirectoryWatcher::create" with
llvm::Expected<std::unique_ptr<DirectoryWatcher>> DW = DirectoryWatcher::create
to make it more clear that DirectoryWatcher::create is returning an Expected.
I've also allowed for logAllUnhandledErrors to consume errors in the case were
DirectoryWatcher::create produces them.
Bill Wendling [Tue, 6 Aug 2019 22:41:22 +0000 (22:41 +0000)]
Delay diagnosing asm constraints that require immediates until after inlining
Summary:
An inline asm call may result in an immediate input value after inlining.
Therefore, don't emit a diagnostic here if the input isn't an immediate.
Globals are instrumented by adding a pointer tag to their symbol values
and emitting metadata into a special section that allows the runtime to tag
their memory when the library is loaded.
Due to order of initialization issues explained in more detail in the comments,
shadow initialization cannot happen during regular global initialization.
Instead, the location of the global section is marked using an ELF note,
and we require libc support for calling a function provided by the HWASAN
runtime when libraries are loaded and unloaded.
Based on ideas discussed with @evgeny777 in D56672.
Guanzhong Chen [Tue, 6 Aug 2019 21:52:58 +0000 (21:52 +0000)]
[WebAssembly] Lower ASan constructor priority on Emscripten
Summary:
This change gives Emscripten the ability to use more than one constructor
priorities that runs before ASan. By convention, constructor priorites 0-100
are reserved for use by the system. ASan on Emscripten now uses priority 50,
leaving plenty of room for use by Emscripten before and after ASan.
This change is done in response to:
https://github.com/emscripten-core/emscripten/pull/9076#discussion_r310323723
Alex Lorenz [Tue, 6 Aug 2019 20:43:25 +0000 (20:43 +0000)]
[clang-scan-deps] Implementation of dependency scanner over minimized sources
This commit implements the fast dependency scanning mode in clang-scan-deps: the
preprocessing is done on files that are minimized using the dependency directives source minimizer.
A shared file system cache is used to ensure that the file system requests and source minimization
is performed only once. The cache assumes that the underlying filesystem won't change during the course
of the scan (or if it will, it will not affect the output), and it can't be evicted. This means that the
service and workers can be used for a single run of a dependency scanner, and can't be reused across multiple,
incremental runs. This is something that we'll most likely support in the future though.
Note that the driver still utilizes the underlying real filesystem.
This commit is also still missing the fast skipped PP block skipping optimization that I mentioned at EuroLLVM talk.
Additionally, the file manager is still not reused by the threads as well.
Balazs Keri [Tue, 6 Aug 2019 12:10:16 +0000 (12:10 +0000)]
[CrossTU] Handle case when no USR could be generated during Decl search.
Summary:
When searching for a declaration to be loaded the "lookup name" for every
other Decl is computed. If the USR can not be determined here should be
not an assert, instead skip this Decl.
Gabor Marton [Tue, 6 Aug 2019 09:52:21 +0000 (09:52 +0000)]
Add User docs for ASTImporter
Summary:
This document includes the description of the ASTImporter from the user/client
perspective.
A subsequent patch will describe the development internals.
Shoaib Meenai [Tue, 6 Aug 2019 06:48:43 +0000 (06:48 +0000)]
[Driver] Introduce -stdlib++-isystem
There are times when we wish to explicitly control the C++ standard
library search paths used by the driver. For example, when we're
building against the Android NDK, we might want to use the NDK's C++
headers (which have a custom inline namespace) even if we have C++
headers installed next to the driver. We might also be building against
a non-standard directory layout and wanting to specify the C++ standard
library include directories explicitly.
We could accomplish this by passing -nostdinc++ and adding an explicit
-isystem for our custom search directories. However, users of our
toolchain may themselves want to use -nostdinc++ and a custom C++ search
path (libc++'s build does this, for example), and our added -isystem
won't respect the -nostdinc++, leading to multiple C++ header
directories on the search path, which causes build failures.
Add a new driver option -stdlib++-isystem to support this use case.
Passing this option suppresses adding the default C++ library include
paths in the driver, and it also respects -nostdinc++ to allow users to
still override the C++ library paths themselves.
It's a bit unfortunate that we end up with both -stdlib++-isystem and
-cxx-isystem, but their semantics differ significantly. -cxx-isystem is
unaffected by -nostdinc++ and is added to the end of the search path
(which is not appropriate for C++ standard library headers, since they
often #include_next into other system headers), while -stdlib++-isystem
respects -nostdinc++, is added to the beginning of the search path, and
suppresses the default C++ library include paths.
Fangrui Song [Tue, 6 Aug 2019 06:25:32 +0000 (06:25 +0000)]
[Driver] Prioritize SYSROOT/usr/include over RESOURCE_DIR/include on linux-musl
On a musl-based Linux distribution, stdalign.h stdarg.h stdbool.h stddef.h stdint.h stdnoreturn.h are expected to be provided by musl (/usr/include), instead of RESOURCE_DIR/include.
Reorder RESOURCE_DIR/include to fix the search order problem.
(Currently musl doesn't provide stdatomic.h. stdatomic.h is still found in RESOURCE_DIR/include.)
This is different from a glibc-based distribution where RESOURCE_DIR/include is placed before SYSROOT/usr/include.
According to the maintainer of musl:
> musl does not support use/mixing of compiler-provided std headers with its headers, and intentionally has no mechanism for communicating with such headers as to which types have already been defined or still need to be defined. If the current include order, with clang's headers before the libc ones, works in some situations, it's only by accident.
Puyan Lotfi [Tue, 6 Aug 2019 05:12:23 +0000 (05:12 +0000)]
[clang][DirectoryWatcher] Adding llvm::Expected error handling to create.
Prior to this patch Unix style errno error reporting from the inotify layer was
used by DirectoryWatcher::create to simply return a nullptr on error. This
would generally be ok, except that in LLVM we have much more robust error
reporting through the facilities of llvm::Expected.
The other critical thing I stumbled across was that the unit tests for
DirectoryWatcher were not failing abruptly when inotify_init() was reporting an
error, but would continue with the testing and eventually hit a deadlock in a
pathological machine state (ie in the unit test, the return nullptr on ::create
was ignored).
Generally this pathological state never happens on any build bot, so it is
totally understandable that it was overlooked, but on a Linux desktop running
a dubious desktop environment (which I will not name) there is a chance that
said desktop environment could use up enough inotify instances to exceed the
user's limit. These are the conditions that led me to hit the deadlock I am
addressing in this patch with more robust error handling.
With the new llvm::Expected error handling when your system runs out of inotify
instances for your user, the unit test will be forced to handle the error or
crash and report the issue to the user instead of weirdly deadlocking on a
condition variable wait.
Matt Arsenault [Tue, 6 Aug 2019 03:28:37 +0000 (03:28 +0000)]
Builtins: Start adding half versions of math builtins
The implementation of the OpenCL builtin currently library uses 2
different hacks to get to the corresponding IR intrinsics from the
source. This will allow removal of those.
This is the set that is currently used (minus a few vector ones).
A buildbot got angry about this new test, with error messages like:
warn-nullchar-nullptr.c Line 16: use of undeclared identifier 'u'
It looks like this `u'c'` syntax was introduced in C11; I'm guessing
some bots may default to something before that. Let's see if explicitly
specifying the standard version makes it happy...
This patch adds a warning that diagnoses comparisons of pointers to
'\0'. This is often indicative of a bug (e.g. the user might've
forgotten to dereference the pointer).
Michael Kruse [Mon, 5 Aug 2019 18:43:21 +0000 (18:43 +0000)]
[OpenMP 5.0] Codegen support for user-defined mappers.
This patch implements the code generation for OpenMP 5.0 declare mapper
(user-defined mapper) constructs. For each declare mapper, a mapper
function is generated. These mapper functions will be called by the
runtime and/or other mapper functions to achieve user defined mapping.
The design slides can be found at
https://github.com/lingda-li/public-sharing/blob/master/mapper_runtime_design.pptx
Re-commit after revert in r367773 because r367755 changed the LLVM-IR
output such that a CHECK line failed.
Some compiler, notably older gccs (< 8) can have trouble with multiline raw
string literals inside macros. This just moves the code outsize the macro, to
attempt to appease the bots.
Rainer Orth [Mon, 5 Aug 2019 14:06:16 +0000 (14:06 +0000)]
[Driver] Properly use values-X[ca].o, values-xpg[46].o on Solaris
Builtins-*-sunos :: compiler_rt_logbf_test.c currently FAILs on Solaris, both SPARC and
x86, 32 and 64-bit.
It turned out that this is due to different behaviour of logb depending on the C
standard compiled for, as documented on logb(3M):
RETURN VALUES
Upon successful completion, these functions return the exponent of x.
If x is subnormal:
o For SUSv3-conforming applications compiled with the c99 com-
piler driver (see standards(7)), the exponent of x as if x
were normalized is returned.
o Otherwise, if compiled with the cc compiler driver, -1022,
-126, and -16382 are returned for logb(), logbf(), and
logbl(), respectively.
Studio c99 and gcc control this by linking with the appropriate version of values-xpg[46].o, but clang uses neither of those.
The following patch fixes this by following what gcc does, as corrected some time ago in
Fix use of Solaris values-Xc.o (PR target/40411)
https://gcc.gnu.org/ml/gcc-patches/2018-01/msg02350.html and
https://gcc.gnu.org/ml/gcc-patches/2018-01/msg02384.html.
Tested on x86_64-pc-solaris2.11, sparcv9-sun-solaris2.11, and x86_64-pc-linux-gnu.
Rainer Orth [Mon, 5 Aug 2019 13:59:26 +0000 (13:59 +0000)]
Move LangStandard*, InputKind::Language to Basic
This patch is a prerequisite for using LangStandard from Driver in
https://reviews.llvm.org/D64793.
It moves LangStandard* and InputKind::Language to Basic. It is mostly
mechanical, with only a few changes of note:
- enum Language has been changed into enum class Language : uint8_t to
avoid a clash between OpenCL in enum Language and OpenCL in enum
LangFeatures and not to increase the size of class InputKind.
- Now that getLangStandardForName, which is currently unused, also checks
both canonical and alias names, I've introduced a helper getLangKind
which factors out a code pattern already used 3 times.
The patch has been tested on x86_64-pc-solaris2.11, sparcv9-sun-solaris2.11,
and x86_64-pc-linux-gnu.
There's a companion patch for lldb which uses LangStandard.h
(https://reviews.llvm.org/D65717).
While polly includes isl which in turn uses InputKind::C, that part of the
code isn't even built inside the llvm tree. I've posted a patch to allow
for both InputKind::C and Language::C upstream
(https://groups.google.com/forum/#!topic/isl-development/6oEvNWOSQFE).
projects / clang / log