Support retaining data dirs on successful TAP tests
This moves the data directories from using temporary directories with
randomness in the directory name to a static name, to make it easier to
debug. The data directory will be retained if tests fail or the test
code dies/exits with failure, and is automatically removed on the next
make check.
If the environment variable PG_TEST_NOCLEAN is defined, the data
directories will be retained regardless of test or exit status.
Tom Lane [Tue, 5 Sep 2017 16:02:06 +0000 (12:02 -0400)]
In psql, use PSQL_PAGER in preference to PAGER, if it's set.
This allows the user's environment to set up a psql-specific choice
of pager, in much the same way that we provide PSQL_EDITOR to allow
a psql-specific override of the more widely known EDITOR variable.
Throttling for sending a base backup in walsender is broken for the case
where there is a lot of WAL traffic, because the latch used to put the
walsender to sleep is also signalled by regular WAL traffic (and each
signal causes an additional batch of data to be sent); the net effect is
that there is no or little actual throttling. This is undesirable, so
rewrite the sleep into a loop to achieve the desired effeect.
Author: Jeff Janes, small tweaks by me Reviewed-by: Antonin Houska
Discussion: https://postgr.es/m/CAMkU=1xH6mde-yL-Eo1TKBGNd0PB1-TMxvrNvqcAkN-qr2E9mw@mail.gmail.com
Tom Lane [Tue, 5 Sep 2017 14:51:36 +0000 (10:51 -0400)]
Add psql variables showing server version and psql version.
We already had a psql variable VERSION that shows the verbose form of
psql's own version. Add VERSION_NAME to show the short form (e.g.,
"11devel") and VERSION_NUM to show the numeric form (e.g., 110000).
Also add SERVER_VERSION_NAME and SERVER_VERSION_NUM to show the short and
numeric forms of the server's version. (We'd probably add SERVER_VERSION
with the verbose string if it were readily available; but adding another
network round trip to get it seems too expensive.)
The numeric forms, in particular, are expected to be useful for scripting
purposes, now that psql can do conditional tests.
Tom Lane [Tue, 5 Sep 2017 14:17:10 +0000 (10:17 -0400)]
Reformat psql's --help=variables output.
The previous format with variable names and descriptions in separate
columns was extremely constraining about the length of the descriptions.
We'd dealt with that in several inconsistent ways over the years,
including letting the lines run over 80 characters, breaking descriptions
into multiple lines, or shoving the description onto a separate line.
But it's been a long time since the output could realistically fit onto
a single screen vertically, so let's just rely even more heavily on the
pager to deal with the vertical distance, and split each entry into two
(or more) lines, in the format
variable-name
variable description goes here
Each variable name + description remains a single translatable string,
in hopes of reducing translator confusion; we're just changing the
embedded whitespace.
I failed to resist the temptation to copy-edit one or two of the
descriptions while at it.
Tom Lane [Mon, 4 Sep 2017 21:25:31 +0000 (17:25 -0400)]
Be more careful about newline-chomping in pgbench.
process_backslash_command would drop the last character of the input
command on the assumption that it was a newline. Given a non newline
terminated input file, this could result in dropping the last character
of the command. Fix that by doing an actual test that we're removing
a newline.
While at it, allow for Windows newlines (\r\n), and suppress multiple
newlines if any. I do not think either of those cases really occur,
since (a) we read script files in text mode and (b) the lexer stops
when it hits a newline. But it's cheap enough and it provides a
stronger guarantee about what the result string looks like.
This is just cosmetic, I think, since the possibly-overly-chomped
line was only used for display not for further processing. So
it doesn't seem necessary to back-patch.
Fabien Coelho, reviewed by Nikolay Shaplov, whacked around a bit by me
Tom Lane [Mon, 4 Sep 2017 20:24:08 +0000 (16:24 -0400)]
Fix some subtle problems in pgbench transaction stats counting.
With --latency-limit, transactions might get skipped even beyond the
transaction count limit specified by -t, throwing off the expected
number of transactions and thus the denominator for later stats.
Be sure to stop skipping transactions once -t is reached.
Also, include skipped transactions in the "cnt" fields; this requires
discounting them again in a couple of places, but most places are
better off with this definition. In particular this is needed to
get correct overall stats for the combination of -R/-L/-t options.
Merge some more processing into processXactStats() to simplify this.
In passing, add a check that --progress-timestamp is specified only
when --progress is.
We might consider back-patching this, but given that it only matters
for a combination of options, and given the lack of field complaints,
consensus seems to be not to bother.
Tom Lane [Mon, 4 Sep 2017 17:45:20 +0000 (13:45 -0400)]
Adjust pgbench to allow non-ASCII characters in variable names.
This puts it in sync with psql's notion of what is a valid variable name.
Like psql, we document that "non-Latin letters" are allowed, but actually
any non-ASCII character is accepted.
Tom Lane [Sun, 3 Sep 2017 15:12:29 +0000 (11:12 -0400)]
Suppress compiler warnings in dshash.c.
Some compilers complain, not unreasonably, about left-shifting an
int32 "1" and then assigning the result to an int64. In practice
I sure hope that this data structure never gets large enough that
an overflow would actually occur; but let's cast the constant to
the right type to avoid the hazard.
In passing, fix a typo in dshash.h.
Amit Kapila, adjusted as per comment from Thomas Munro.
Tom Lane [Sun, 3 Sep 2017 15:01:08 +0000 (11:01 -0400)]
Fix macro-redefinition warning on MSVC.
In commit 9d6b160d7, I tweaked pg_config.h.win32 to use
"#define HAVE_LONG_LONG_INT_64 1" rather than defining it as empty,
for consistency with what happens in an autoconf'd build.
But Solution.pm injects another definition of that macro into
ecpg_config.h, leading to justifiable (though harmless) compiler whining.
Make that one consistent too. Back-patch, like the previous patch.
Tom Lane [Fri, 1 Sep 2017 21:38:54 +0000 (17:38 -0400)]
Improve division of labor between execParallel.c and nodeGather[Merge].c.
Move the responsibility for creating/destroying TupleQueueReaders into
execParallel.c, to avoid duplicative coding in nodeGather.c and
nodeGatherMerge.c. Also, instead of having DestroyTupleQueueReader do
shm_mq_detach, do it in the caller (which is now only ExecParallelFinish).
This means execParallel.c does both the attaching and detaching of the
tuple-queue-reader shm_mqs, which seems less weird than the previous
arrangement.
These changes also eliminate a vestigial memory leak (of the pei->tqueue
array). It's now demonstrable that rescans of Gather or GatherMerge don't
leak memory.
Add the maxrss field to the getrusage output (log_*_stats). This was
previously omitted because of portability concerns, but we feel this
might not be a concern anymore.
based on patch by Justin Pryzby <pryzby@telsasoft.com>
Tom Lane [Fri, 1 Sep 2017 19:14:18 +0000 (15:14 -0400)]
Make [U]INT64CONST safe for use in #if conditions.
Instead of using a cast to force the constant to be the right width,
assume we can plaster on an L, UL, LL, or ULL suffix as appropriate.
The old approach to this is very hoary, dating from before we were
willing to require compilers to have working int64 types.
This fix makes the PG_INT64_MIN, PG_INT64_MAX, and PG_UINT64_MAX
constants safe to use in preprocessor conditions, where a cast
doesn't work. Other symbolic constants that might be defined using
[U]INT64CONST are likewise safer than before.
Also fix the SIZE_MAX macro to be similarly safe, if we are forced
to provide a definition for that. The test added in commit 2e70d6b5e
happens to do what we want even with the hack "(size_t) -1" definition,
but we could easily get burnt on other tests in future.
Back-patch to all supported branches, like the previous commits.
doc: Remove mentions of server-side CRL and CA file names
Commit a445cb92ef5b3a31313ebce30e18cc1d6e0bdecb removed the default file
names for server-side CRL and CA files, but left them in the docs with a
small note. This removes the note and the previous default names to
clarify, as well as changes mentions of the file names to make it
clearer that they are configurable.
Author: Daniel Gustafsson <daniel@yesql.se> Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Tom Lane [Fri, 1 Sep 2017 17:52:53 +0000 (13:52 -0400)]
Ensure SIZE_MAX can be used throughout our code.
Pre-C99 platforms may lack <stdint.h> and thereby SIZE_MAX. We have
a couple of places using the hack "(size_t) -1" as a fallback, but
it wasn't universally available; which means the code added in commit 2e70d6b5e fails to compile everywhere. Move that hack to c.h so that
we can rely on having SIZE_MAX everywhere.
Per discussion, it'd be a good idea to make the macro's value safe
for use in #if-tests, but that will take a bit more work. This is
just a quick expedient to get the buildfarm green again.
Back-patch to all supported branches, like the previous commit.
Robert Haas [Fri, 1 Sep 2017 15:45:17 +0000 (11:45 -0400)]
Use group updates when setting transaction status in clog.
Commit 0e141c0fbb211bdd23783afa731e3eef95c9ad7a introduced a mechanism
to reduce contention on ProcArrayLock by having a single process clear
XIDs in the procArray on behalf of multiple processes, reducing the
need to hand the lock around. A previous attempt to introduce a similar
mechanism for CLogControlLock in ccce90b398673d55b0387b3de66639b1b30d451b
crashed and burned, but the design problem which resulted in those
failures is believed to have been corrected in this version.
Amit Kapila, with some cosmetic changes by me. See the previous commit
message for additional credits.
The original code had a race condition because it never ensured the
standby was caught up before proceeding; add a wait similar to every
other place that does this.
Do for replication origins what the previous commit did for replication
slots: restore the original behavior of replication origin drop to raise
an error rather than blocking, because users might be depending on the
original behavior. Maintain the blocking behavior when invoked
internally from logical replication subscription handling.
Commit 9915de6c1cb2 changed the default behavior of
DROP_REPLICATION_SLOT so that it would wait until any session holding
the slot active would release it, instead of raising an error. But
users are already depending on the original behavior, so revert to it by
default and add a WAIT option to invoke the new behavior.
Per complaint from Simone Gotti, in
Discussion: https://postgr.es/m/CAEvsy6Wgdf90O6pUvg2wSVXL2omH5OPC-38OD4Zzgk-FXavj3Q@mail.gmail.com
Robert Haas [Fri, 1 Sep 2017 02:21:21 +0000 (22:21 -0400)]
Introduce 64-bit hash functions with a 64-bit seed.
This will be useful for hash partitioning, which needs a way to seed
the hash functions to avoid problems such as a hash index on a hash
partitioned table clumping all values into a small portion of the
bucket space; it's also useful for anything that wants a 64-bit hash
value rather than a 32-bit hash value.
Just in case somebody wants a 64-bit hash value that is compatible
with the existing 32-bit hash values, make the low 32-bits of the
64-bit hash value match the 32-bit hash value when the seed is 0.
Tom Lane [Thu, 31 Aug 2017 20:20:58 +0000 (16:20 -0400)]
Avoid memory leaks when a GatherMerge node is rescanned.
Rescanning a GatherMerge led to leaking some memory in the executor's
query-lifespan context, because most of the node's working data structures
were simply abandoned and rebuilt from scratch. In practice, this might
never amount to much, given the cost of relaunching worker processes ---
but it's still pretty messy, so let's fix it.
We can rearrange things so that the tuple arrays are simply cleared and
reused, and we don't need to rebuild the TupleTableSlots either, just
clear them. One small complication is that because we might get a
different number of workers on each iteration, we can't keep the old
convention that the leader's gm_slots[] entry is the last one; the leader
might clobber a TupleTableSlot that we need for a worker in a future
iteration. Hence, adjust the logic so that the leader has slot 0 always,
while the active workers have slots 1..n.
Back-patch to v10 to keep all the existing versions of nodeGatherMerge.c
in sync --- because of the renumbering of the slots, there would otherwise
be a very large risk that any future backpatches in this module would
introduce bugs.
Robert Haas [Thu, 31 Aug 2017 19:50:18 +0000 (15:50 -0400)]
Expand partitioned tables in PartDesc order.
Previously, we expanded the inheritance hierarchy in the order in
which find_all_inheritors had locked the tables, but that turns out
to block quite a bit of useful optimization. For example, a
partition-wise join can't count on two tables with matching bounds
to get expanded in the same order.
Where possible, this change results in expanding partitioned tables in
*bound* order. Bound order isn't well-defined for a list-partitioned
table with a null-accepting partition or for a list-partitioned table
where the bounds for a single partition are interleaved with other
partitions. However, when expansion in bound order is possible, it
opens up further opportunities for optimization, such as
strength-reducing MergeAppend to Append when the expansion order
matches the desired sort order.
Patch by me, with cosmetic revisions by Ashutosh Bapat.
Tom Lane [Thu, 31 Aug 2017 19:10:24 +0000 (15:10 -0400)]
Clean up shm_mq cleanup.
The logic around shm_mq_detach was a few bricks shy of a load, because
(contrary to the comments for shm_mq_attach) all it did was update the
shared shm_mq state. That left us leaking a bit of process-local
memory, but much worse, the on_dsm_detach callback for shm_mq_detach
was still armed. That means that whenever we ultimately detach from
the DSM segment, we'd run shm_mq_detach again for already-detached,
possibly long-dead queues. This accidentally fails to fail today,
because we only ever re-use a shm_mq's memory for another shm_mq, and
multiple detach attempts on the last such shm_mq are fairly harmless.
But it's gonna bite us someday, so let's clean it up.
To do that, change shm_mq_detach's API so it takes a shm_mq_handle
not the underlying shm_mq. This makes the callers simpler in most
cases anyway. Also fix a few places in parallel.c that were just
pfree'ing the handle structs rather than doing proper cleanup.
Back-patch to v10 because of the risk that the revenant shm_mq_detach
callbacks would cause a live bug sometime. Since this is an API
change, it's too late to do it in 9.6. (We could make a variant
patch that preserves API, but I'm not excited enough to do that.)
Peter Eisentraut [Thu, 31 Aug 2017 02:40:24 +0000 (22:40 -0400)]
Remove to pre-8.2 coding convention for PG_MODULE_MAGIC
PG_MODULE_MAGIC has been around since 8.2, with 8.1 long since in EOL,
so remove the mention of #ifdef guards for compiling against pre-8.2
sources from the documentation.
Tom Lane [Wed, 30 Aug 2017 21:21:08 +0000 (17:21 -0400)]
Code review for nodeGatherMerge.c.
Comment the fields of GatherMergeState, and organize them a bit more
sensibly. Comment GMReaderTupleBuffer more usefully too. Improve
assorted other comments that were obsolete or just not very good English.
Get rid of the use of a GMReaderTupleBuffer for the leader process;
that was confusing, since only the "done" field was used, and that
in a way redundant with need_to_scan_locally.
In gather_merge_init, avoid calling load_tuple_array for
already-known-exhausted workers. I'm not sure if there's a live bug there,
but the case is unlikely to be well tested due to timing considerations.
Remove some useless code, such as duplicating the tts_isempty test done by
TupIsNull.
Remove useless initialization of ps.qual, replacing that with an assertion
that we have no qual to check. (If we did, the code would fail to check
it.)
Avoid applying heap_copytuple to a null tuple. While that fails to crash,
it's confusing and it makes the code less legible not more so IMO.
Propagate a couple of these changes into nodeGather.c, as well.
Back-patch to v10, partly because of the possibility that the
gather_merge_init change is fixing a live bug, but mostly to keep
the branches in sync to ease future bug fixes.
Tom Lane [Wed, 30 Aug 2017 17:18:16 +0000 (13:18 -0400)]
Separate reinitialization of shared parallel-scan state from ExecReScan.
Previously, the parallel executor logic did reinitialization of shared
state within the ExecReScan code for parallel-aware scan nodes. This is
problematic, because it means that the ExecReScan call has to occur
synchronously (ie, during the parent Gather node's ReScan call). That is
swimming very much against the tide so far as the ExecReScan machinery is
concerned; the fact that it works at all today depends on a lot of fragile
assumptions, such as that no plan node between Gather and a parallel-aware
scan node is parameterized. Another objection is that because ExecReScan
might be called in workers as well as the leader, hacky extra tests are
needed in some places to prevent unwanted shared-state resets.
Hence, let's separate this code into two functions, a ReInitializeDSM
call and the ReScan call proper. ReInitializeDSM is called only in
the leader and is guaranteed to run before we start new workers.
ReScan is returned to its traditional function of resetting only local
state, which means that ExecReScan's usual habits of delaying or
eliminating child rescan calls are safe again.
As with the preceding commit 7df2c1f8d, it doesn't seem to be necessary
to make these changes in 9.6, which is a good thing because the FDW and
CustomScan APIs are impacted.
Revert the reversion commits a20aac890 and 9b644745c. In the wake of
commit 7df2c1f8d, we should get stable buildfarm results from this test;
if not, I'd like to know sooner not later.
Tom Lane [Wed, 30 Aug 2017 13:29:55 +0000 (09:29 -0400)]
Force rescanning of parallel-aware scan nodes below a Gather[Merge].
The ExecReScan machinery contains various optimizations for postponing
or skipping rescans of plan subtrees; for example a HashAgg node may
conclude that it can re-use the table it built before, instead of
re-reading its input subtree. But that is wrong if the input contains
a parallel-aware table scan node, since the portion of the table scanned
by the leader process is likely to vary from one rescan to the next.
This explains the timing-dependent buildfarm failures we saw after
commit a2b70c89c.
The established mechanism for showing that a plan node's output is
potentially variable is to mark it as depending on some runtime Param.
Hence, to fix this, invent a dummy Param (one that has a PARAM_EXEC
parameter number, but carries no actual value) associated with each Gather
or GatherMerge node, mark parallel-aware nodes below that node as dependent
on that Param, and arrange for ExecReScanGather[Merge] to flag that Param
as changed whenever the Gather[Merge] node is rescanned.
This solution breaks an undocumented assumption made by the parallel
executor logic, namely that all rescans of nodes below a Gather[Merge]
will happen synchronously during the ReScan of the top node itself.
But that's fundamentally contrary to the design of the ExecReScan code,
and so was doomed to fail someday anyway (even if you want to argue
that the bug being fixed here wasn't a failure of that assumption).
A follow-on patch will address that issue. In the meantime, the worst
that's expected to happen is that given very bad timing luck, the leader
might have to do all the work during a rescan, because workers think
they have nothing to do, if they are able to start up before the eventual
ReScan of the leader's parallel-aware table scan node has reset the
shared scan state.
Although this problem exists in 9.6, there does not seem to be any way
for it to manifest there. Without GatherMerge, it seems that a plan tree
that has a rescan-short-circuiting node below Gather will always also
have one above it that will short-circuit in the same cases, preventing
the Gather from being rescanned. Hence we won't take the risk of
back-patching this change into 9.6. But v10 needs it.
Peter Eisentraut [Tue, 29 Aug 2017 23:33:24 +0000 (19:33 -0400)]
doc: Avoid sidebar element
The formatting of the sidebar element didn't carry over to the new tool
chain. Instead of inventing a whole new way of dealing with it, just
convert the one use to a "note".
Tom Lane [Tue, 29 Aug 2017 19:38:05 +0000 (15:38 -0400)]
Doc: document libpq's restriction to INT_MAX rows in a PGresult.
As long as PQntuples, PQgetvalue, etc, use "int" for row numbers, we're
pretty much stuck with this limitation. The documentation formerly stated
that the result of PQntuples "might overflow on 32-bit operating systems",
which is just nonsense: that's not where the overflow would happen, and
if you did reach an overflow it would not be on a 32-bit machine, because
you'd have OOM'd long since.
Tom Lane [Tue, 29 Aug 2017 19:18:01 +0000 (15:18 -0400)]
Teach libpq to detect integer overflow in the row count of a PGresult.
Adding more than 1 billion rows to a PGresult would overflow its ntups and
tupArrSize fields, leading to client crashes. It'd be desirable to use
wider fields on 64-bit machines, but because all of libpq's external APIs
use plain "int" for row counters, that's going to be hard to accomplish
without an ABI break. Given the lack of complaints so far, and the general
pain that would be involved in using such huge PGresults, let's settle for
just preventing the overflow and reporting a useful error message if it
does happen. Also, for a couple more lines of code we can increase the
threshold of trouble from INT_MAX/2 to INT_MAX rows.
To do that, refactor pqAddTuple() to allow returning an error message that
replaces the default assumption that it failed because of out-of-memory.
Along the way, fix PQsetvalue() so that it reports all failures via
pqInternalNotice(). It already did so in the case of bad field number,
but neglected to report anything for other error causes.
Because of the potential for crashes, this seems like a back-patchable
bug fix, despite the lack of field reports.
Robert Haas [Tue, 29 Aug 2017 17:22:49 +0000 (13:22 -0400)]
Propagate sort instrumentation from workers back to leader.
Up until now, when parallel query was used, no details about the
sort method or space used by the workers were available; details
were shown only for any sorting done by the leader. Fix that.
Robert Haas [Tue, 29 Aug 2017 17:12:23 +0000 (13:12 -0400)]
Push tuple limits through Gather and Gather Merge.
If we only need, say, 10 tuples in total, then we certainly don't need
more than 10 tuples from any single process. Pushing down the limit
lets workers exit early when possible. For Gather Merge, there is
an additional benefit: a Sort immediately below the Gather Merge can
be done as a bounded sort if there is an applicable limit.
Tom Lane [Tue, 29 Aug 2017 13:34:21 +0000 (09:34 -0400)]
Improve docs about numeric formatting patterns (to_char/to_number).
The explanation about "0" versus "9" format characters was confusing
and arguably wrong; the discussion of sign handling wasn't very good
either. Notably, while it's accurate to say that "FM" strips leading
zeroes in date/time values, what it really does with numeric values
is to strip *trailing* zeroes, and then only if you wrote "9" rather
than "0". Per gripes from Erwin Brandstetter.
Tom Lane [Mon, 28 Aug 2017 14:14:20 +0000 (10:14 -0400)]
Fix over-aggressive sanity check in misc_sanity.sql.
Fix thinko in commit 8be8510cf: it's okay to have dbid == 0 in normal
(non-pin) entries in pg_shdepend, because global objects such as
databases are entered that way. The test would pass so long as it
was run in a cluster containing no databases/tablespaces owned by,
or granted to, roles other than the bootstrap superuser. That's the
expected situation for "make check", but for "make installcheck", not
so much.
Tom Lane [Sat, 26 Aug 2017 19:19:24 +0000 (15:19 -0400)]
First-draft release notes for 9.6.5.
As usual, the release notes for other branches will be made by cutting
these down, but put them up for community review first. Note the first
entry is only for 9.4.
Peter Eisentraut [Sat, 26 Aug 2017 13:21:46 +0000 (09:21 -0400)]
pg_test_timing: Some NLS fixes
The string "% of total" was marked by xgettext to be a c-format, but it
is actually not, so mark up the source to prevent that.
Compute the column widths of the final display dynamically based on the
translated strings, so that translations don't mess up the display
accidentally.
Robert Haas [Fri, 25 Aug 2017 19:07:44 +0000 (15:07 -0400)]
Improve low-level backup documentation.
Our documentation hasn't really caught up with the fact that
non-exclusive backups can now be taken using pg_start_backup and
pg_stop_backup even on standbys. Update, also correcting some
errors introduced by 52f8a59dd953c6820baf153e97cf07d31b8ac1d6.
Updates to the 9.6 documentation are needed as well, but that
will need a separate patch as some things are different on that
version.
David Steele, reviewed by Robert Haas and Michael Paquier
Tom Lane [Fri, 25 Aug 2017 13:05:17 +0000 (09:05 -0400)]
Code review for pushing LIMIT through subqueries.
Minor improvements for commit 1f6d515a6. We do not need the (rather
expensive) test for SRFs in the targetlist, because since v10 any
such SRFs would appear in separate ProjectSet nodes. Also, make the
code look more like the existing cases by turning it into a simple
recursion --- the argument that there might be some performance
benefit to contorting the code seems unfounded to me, especially since
any good compiler should turn the tail-recursion into iteration anyway.
Andres Freund [Fri, 25 Aug 2017 00:42:49 +0000 (17:42 -0700)]
Add minimal regression test for blessed record type transfer.
Test that blessed records can be transferred through a TupleQueue and
correctly decoded by another backend. While touching the file, make
sure that force_parallel_mode settings only cover relevant tests.
Author: Thomas Munro, editorialized by Andres Freund Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/20170823054644.efuzftxjpfi6wwqs%40alap3.anarazel.de
Andres Freund [Fri, 25 Aug 2017 00:01:36 +0000 (17:01 -0700)]
Consolidate the function pointer types used by dshash.c.
Commit 8c0d7bafad36434cb08ac2c78e69ae72c194ca20 introduced dshash with hash
and compare functions like DynaHash's, and also variants that take a user
data pointer instead of size. Simplify the interface by merging them into
a single pair of function pointer types that take both size and a user data
pointer.
Since it is anticipated that memcmp and tag_hash behavior will be a common
requirement, provide wrapper functions dshash_memcmp and dshash_memhash that
conform to the new function types.
Author: Thomas Munro Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/20170823054644.efuzftxjpfi6wwqs%40alap3.anarazel.de
Andres Freund [Thu, 24 Aug 2017 22:07:40 +0000 (15:07 -0700)]
Fix harmless thinko in dsa.c.
Commit 16be2fd100199bdf284becfcee02c5eb20d8a11d added DSA_ALLOC_HUGE,
DSA_ALLOC_ZERO and DSA_ALLOC_NO_OOM which have the same numerical
values and meanings as the similarly named MCXT_... macros. In one
place we accidentally used MCXT_ALLOC_NO_OOM when DSA_ALLOC_NO_OOM is
wanted, so tidy that up.
Author: Thomas Munro
Discussion: http://postgr.es/m/CAEepm=2AimHxVkkxnMfQvbZMkXy0uKbVa0-D38c5-qwrCm4CMQ@mail.gmail.com
Backpatch: 10, where dsa was introduced.
Peter Eisentraut [Thu, 24 Aug 2017 19:29:35 +0000 (15:29 -0400)]
pg_upgrade: Remove dead code
Remove code meant for upgrading to a particular version of PostgreSQL
9.0. Since pg_upgrade only supports upgrading to the current major
version, this code is no longer useful.
Peter Eisentraut [Thu, 24 Aug 2017 18:04:28 +0000 (14:04 -0400)]
Increase SCRAM salt length
The original value 12 was set based on RFC 5802 for SCRAM-SHA-1, but RFC
7677 for SCRAM-SHA-256 uses 16, so use that. (This does not affect the
validity of already stored verifiers.)
Tom Lane [Thu, 24 Aug 2017 17:39:51 +0000 (13:39 -0400)]
Make new regression test case parallel-safe, and improve its output.
The test case added by commit 1f6d515a6 fails on buildfarm members that
have force_parallel_mode turned on, because we currently don't report sort
performance details from worker processes back to the master. To fix that,
just make the test table be temp rather than regular; that's a good idea
anyway to forestall any possible interference from auto-analyze.
(The restriction that workers can't access temp tables might go away
someday, but almost certainly not before the other thing gets fixed.)
Also, improve the test so that we retain as much as possible of the
EXPLAIN ANALYZE output. This aids debugging failures, and might also
expose problems that the preceding version masked.
Andres Freund [Wed, 23 Aug 2017 05:41:32 +0000 (22:41 -0700)]
Hash tables backed by DSA shared memory.
Add general purpose chaining hash tables for DSA memory. Unlike
DynaHash in shared memory mode, these hash tables can grow as
required, and cope with being mapped into different addresses in
different backends.
There is a wide range of potential users for such a hash table, though
it's very likely the interface will need to evolve as we come to
understand the needs of different kinds of users. E.g support for
iterators and incremental resizing is planned for later commits and
the details of the callback signatures are likely to change.
Author: Thomas Munro Reviewed-By: John Gorman, Andres Freund, Dilip Kumar, Robert Haas
Discussion:
https://postgr.es/m/CAEepm=3d8o8XdVwYT6O=bHKsKAM2pu2D6sV1S_=4d+jStVCE7w@mail.gmail.com
https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Andres Freund [Tue, 22 Aug 2017 23:05:48 +0000 (16:05 -0700)]
Refactor typcache.c's record typmod hash table.
Previously, tuple descriptors were stored in chains keyed by a fixed size
array of OIDs. That meant there were effectively two levels of collision
chain -- one inside and one outside the hash table. Instead, let dynahash.c
look after conflicts for us by supplying a proper hash and equal function
pair.
This is a nice cleanup on its own, but also simplifies followup
changes allowing blessed TupleDescs to be shared between backends
participating in parallel query.
Author: Thomas Munro Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm%3D34GVhOL%2BarUx56yx7OPk7%3DqpGsv3CpO54feqjAwQKm5g%40mail.gmail.com
Andres Freund [Tue, 22 Aug 2017 22:36:49 +0000 (15:36 -0700)]
Add a hash_combine function for mixing hash values.
This hash function is derived from Boost's function of the same name.
Author: Andres Freund, Thomas Munro
Discussion: https://postgr.es/m/CAEepm%3D3rdgjfxW4cKvJ0OEmya2-34B0qHNG1xV0vK7TGPJGMUQ%40mail.gmail.com
Discussion: https://postgr.es/m/20170731210844.3cwrkmsmbbpt4rjc%40alap3.anarazel.de
Peter Eisentraut [Mon, 21 Aug 2017 13:17:06 +0000 (09:17 -0400)]
Expand set of predefined ICU locales
Install language+region combinations even if they are not distinct from
the language's base locale. This gives better long-term stability of
the set of predefined locales and makes the predefined locales less
implementation-dependent and more practical for users.
Robert Haas [Mon, 21 Aug 2017 18:43:00 +0000 (14:43 -0400)]
pg_prewarm: Add automatic prewarm feature.
Periodically while the server is running, and at shutdown, write out a
list of blocks in shared buffers. When the server reaches consistency
-- unfortunatey, we can't do it before that point without breaking
things -- reload those blocks into any still-unused shared buffers.
Mithun Cy and Robert Haas, reviewed and tested by Beena Emerson,
Amit Kapila, Jim Nasby, and Rafia Sabih.
Noah Misch [Mon, 21 Aug 2017 04:22:18 +0000 (21:22 -0700)]
Inject $(ICU_LIBS) regardless of platform.
It appeared in a conditional that excludes AIX, Cygwin and MinGW. Give
ICU support a chance to work on those platforms. Back-patch to v10,
where ICU support was introduced.
Andres Freund [Sun, 20 Aug 2017 18:19:12 +0000 (11:19 -0700)]
Partially flatten struct tupleDesc so that it can be used in DSM.
TupleDesc's attributes were already stored in contiguous memory after the
struct. Go one step further and get rid of the array of pointers to
attributes so that they can be stored in shared memory mapped at different
addresses in each backend. This won't work for TupleDescs with contraints
and defaults, since those point to other objects, but for many purposes
only attributes are needed.
Author: Thomas Munro Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Andres Freund [Sun, 20 Aug 2017 18:19:07 +0000 (11:19 -0700)]
Change tupledesc->attrs[n] to TupleDescAttr(tupledesc, n).
This is a mechanical change in preparation for a later commit that
will change the layout of TupleDesc. Introducing a macro to abstract
the details of where attributes are stored will allow us to change
that in separate step and revise it in future.
Author: Thomas Munro, editorialized by Andres Freund Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/CAEepm=0ZtQ-SpsgCyzzYpsXS6e=kZWqk3g5Ygn3MDV7A8dabUA@mail.gmail.com
Tom Lane [Sat, 19 Aug 2017 17:39:37 +0000 (13:39 -0400)]
Fix possible core dump in parallel restore when using a TOC list.
Commit 3eb9a5e7c unintentionally introduced an ordering dependency
into restore_toc_entries_prefork(). The existing coding of
reduce_dependencies() contains a check to skip moving a TOC entry
to the ready_list if it wasn't initially in the pending_list.
This used to suffice to prevent reduce_dependencies() from trying to
move anything into the ready_list during restore_toc_entries_prefork(),
because the pending_list stayed empty throughout that phase; but it no
longer does. The problem doesn't manifest unless the TOC has been
reordered by SortTocFromFile, which is how I missed it in testing.
To fix, just add a test for ready_list == NULL, converting the call
with NULL from a poor man's sanity check into an explicit command
not to touch TOC items' list membership. Clarify some of the comments
around this; in particular, note the primary purpose of the check for
pending_list membership, which is to ensure that we can't try to restore
the same item twice, in case a TOC list forces it to be restored before
its dependency count goes to zero.
Per report from Fabrízio de Royes Mello. Back-patch to 9.3, like the
previous commit.
Robert Haas [Fri, 18 Aug 2017 17:01:05 +0000 (13:01 -0400)]
Fix interaction of triggers, partitioning, and EXPLAIN ANALYZE.
Add a new EState member es_leaf_result_relations, so that the trigger
code knows about ResultRelInfos created by tuple routing. Also make
sure ExplainPrintTriggers knows about partition-related
ResultRelInfos.
That code patch was good as far as it went, but the associated test case
has exposed fundamental brain damage in the parallel scan mechanism,
which is going to take nontrivial work to correct. In the interests of
getting the buildfarm back to green so that unrelated work can proceed,
let's temporarily remove the test case.
Tom Lane [Thu, 17 Aug 2017 17:13:47 +0000 (13:13 -0400)]
Further tweaks to compiler flags for PL/Perl on Windows.
It now emerges that we can only rely on Perl to tell us we must use
-D_USE_32BIT_TIME_T if it's Perl 5.13.4 or later. For older versions,
revert to our previous practice of assuming we need that symbol in
all 32-bit Windows builds. This is not ideal, but inquiring into
which compiler version Perl was built with seems far too fragile.
In any case, we had not previously had complaints about these old
Perl versions, so let's assume this is Good Enough. (It's still
better than the situation ante commit 5a5c2feca, in that at least
the effects are confined to PL/Perl rather than the whole PG build.)
Back-patch to all supported versions, like 5a5c2feca and predecessors.
projects / postgresql / log