Having the hash table key change during iteration is bad, so make it
impossible. Nothing relied on the key type not being const.
(This is also necessary to be able to call the const version of
iterator_facade_base::operator->(). Nothing calls this, and nothing
will, but I tried using it locally during development and it took me a
while to understand what was going wrong.)
Also rename the iterator typedef to const_iterator.
ELF.h contains two getSymbol methods
which seems to be used only from obj2yaml.
One of these methods calls another, which in turn
contains untested error message which doesn't
provide enough information.
Problem is that after improving only just that message,
obj2yaml will not show it,
("Error reading file: yaml: Invalid data was
encountered while parsing the file" message will be shown instead),
because internal errors handling of tool is based on ErrorOr<> class which
stores a error code and as a result can only show a predefined error string, what
actually isn't very useful.
In this patch, I rework obj2yaml's error reporting system
for ELF targets to use Error Expected<> classes.
Also, I improve the error message produced
by getSymbol for demonstration of the new functionality.
David Green [Mon, 15 Jul 2019 11:35:39 +0000 (11:35 +0000)]
[ARM] MVE Vector Shifts
This adds basic lowering for MVE shifts. There are many shifts in MVE, but the
instructions handled here are:
VSHL (imm)
VSHRu (imm)
VSHRs (imm)
VSHL (vector)
VSHL (register)
MVE, like NEON before it, doesn't have shift right by a vector (or register).
We instead have to negate the amount and shift in the opposite direction. This
means we have to convert any SHR's into a form of SHL (that is still signed or
unsigned) with a negated condition and selecting from there. MVE still does
have shifting by an immediate for SHL, ASR and LSR.
This adds lowering for these and for register forms, which work well for shift
lefts but may require an extra fold of neg(vdup(x)) -> vdup(neg(x)) to potentially
work optimally for right shifts.
George Rimar [Mon, 15 Jul 2019 10:50:03 +0000 (10:50 +0000)]
[obj2yaml] - Rework tool's error reporting logic for ELF target.
ELF.h contains two getSymbol methods
which seems to be used only from obj2yaml.
One of these methods calls another, which in turn
contains untested error message which doesn't
provide enough information.
Problem is that after improving only just that message,
obj2yaml will not show it,
("Error reading file: yaml: Invalid data was
encountered while parsing the file" message will be shown instead),
because internal errors handling of tool is based on ErrorOr<> class which
stores a error code and as a result can only show a predefined error string, what
actually isn't very useful.
In this patch, I rework obj2yaml's error reporting system
for ELF targets to use Error Expected<> classes.
Also, I improve the error message produced
by getSymbol for demonstration of the new functionality.
David Green [Mon, 15 Jul 2019 10:44:50 +0000 (10:44 +0000)]
[ARM] Adjust how NEON shifts are lowered
This adjusts the way that we lower NEON shifts to use a DAG target node, not
via a neon intrinsic. This is useful for handling MVE shifts operations in the
same the way. It also renames some of the immediate shift nodes for
consistency, and moves some of the processing of immediate shifts into
LowerShift allowing it to capture more cases.
[Loop Peeling] Fix the bug with IDom setting for exit loops
It is possible that loop exit has two predecessors in a loop body.
In this case after the peeling the iDom of the exit should be a clone of
iDom of original exit but no a clone of a block coming to this exit.
[LoopUtils] Extend the scope of getLoopEstimatedTripCount
With this patch the getLoopEstimatedTripCount function will
accept also the loops where there are more than one exit but
all exits except latch block should ends up with a call to deopt.
This side exits should not impact the estimated trip count.
Yonghong Song [Mon, 15 Jul 2019 04:51:34 +0000 (04:51 +0000)]
[BPF] add unit tests for preserve_{array,union,struct}_access_index intrinsics
This is a followup patch for https://reviews.llvm.org/D61810/new/,
which adds new intrinsics preserve_{array,union,struct}_access_index.
Currently, only BPF backend utilizes preserve_{array,union,struct}_access_index
intrinsics, so all tests are compiled with BPF target.
https://reviews.llvm.org/D61524 already added some tests for these
intrinsics, but some of them pretty complex.
This patch added a few unit test cases focusing on individual intrinsic
functions.
Also made a few clarification on language reference for these intrinsics.
[X86] Separate the memory size of vzext_load/vextract_store from the element size of the result type. Use them improve the codegen of v2f32 loads/stores with sse1 only.
Summary:
SSE1 only supports v4f32. But does have instructions like movlps/movhps that load/store 64-bits of memory.
This patch breaks the connection between the node VT of the vzext_load/vextract_store patterns and the memory VT. Enabling a v4f32 node with a 64-bit memory VT. I've used i64 as the memory VT here. I've written the PatFrag predicate to just check the store size not the specific VT. I think the VT will only matter for CSE purposes. We could use v2f32, but if we want to start using these operations in more places a simple integer type might make the most sense.
I'd like to maybe use this same thing for SSE2 and later as well, but that will need more work to be supported by EltsFromConsecutiveLoads to avoid regressing lit tests. I'd maybe also like to combine bitcasts with these load/stores nodes now that the types are disconnected. And I'd also like to consider canonicalizing (scalar_to_vector + load) to vzext_load.
If you want I can split the mechanical tablegen stuff where I added the 32/64 off from the sse1 change.
[TargetParser][ARM] Account dependencies when processing target features
Teaches ARM::appendArchExtFeatures to account dependencies when processing
target features: i.e. when you say -march=armv8.1-m.main+mve.fp+nofp it
means mve.fp should get discarded too. (Split from D63936)
[LV] Exclude loop-invariant inputs from scalar cost computation.
Loop invariant operands do not need to be scalarized, as we are using
the values outside the loop. We should ignore them when computing the
scalarization overhead.
[clang][Driver][ARM] Favor -mfpu over default CPU features
When processing the command line options march, mcpu and mfpu, we store
the implied target features on a vector. The change D62998 introduced a
temporary vector, where the processed features get accumulated. When
calling DecodeARMFeaturesFromCPU, which sets the default features for
the specified CPU, we certainly don't want to override the features
that have been explicitly specified on the command line. Therefore, the
default features should appear first in the final vector. This problem
became evident once I added the missing (unhandled) target features in
ARM::getExtensionFeatures.
[BitcodeReader] Use tighter upper bound to validate forward references.
At the moment, bitcode files with invalid forward reference can easily
cause the bitcode reader to run out of memory, by creating a forward
reference with a very high index.
We can use the size of the bitcode file as an upper bound, because a
valid bitcode file can never contain more records. This should be
sufficient to fail early in most cases. The only exception is large
files with invalid forward references close to the file size.
There are a couple of clusterfuzz runs that fail with out-of-memory
because of very high forward references and they should be fixed by this
patch.
A concrete example for this is D64507, which causes out-of-memory on
systems with low memory, like the hexagon upstream bots.
David Green [Sat, 13 Jul 2019 15:43:00 +0000 (15:43 +0000)]
[ARM] Add sign and zero extend patterns for MVE
The vmovlb instructions can be uses to sign or zero extend vector registers
between types. This adds some patterns for them and relevant testing. The
VBICIMM generation is also put behind a hasNEON check (as is already done for
VORRIMM).
David Green [Sat, 13 Jul 2019 14:38:53 +0000 (14:38 +0000)]
[ARM] MVE VRINT support
This adds support for the floor/ceil/trunc/... series of instructions,
converting to various forms of VRINT. They use the same suffixes as their
floating point counterparts. There is not VTINTR, so nearbyint is expanded.
Also added a copysign test, to show it is expanded.
FileCheck [7/12]: Arbitrary long numeric expressions
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch extend numeric expression to
support an arbitrary number of operands, either variable or literals.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Revert "[InstCombine] add tests for umin/umax via usub.sat; NFC"
This reverts commit rL365999 / 0f6148df23edcd3081f5e761de19edd4f823f16d.
The tests already exist in this file, and the hoped-for transform
(mentioned in D62871) is invalid because of undef as discussed in
D63060.
[Attributor] Only return attributes with a valid state
Attributor::getAAFor will now only return AbstractAttributes with a
valid AbstractState. This simplifies call sites as they only need to
check if the returned pointer is non-null. It also reduces the potential
for accidental misuse.
PDB HashTable: Move TraitsT from class parameter to the methods that need it
The traits object is only used by a few methods. Deserializing a hash
table and walking it is possible without the traits object, so it
shouldn't be required to build a dummy object for that use case.
The TraitsT object used to be a function template parameter before
r327647, this restores it to that state.
This makes it clear that the traits object isn't needed at all in 1 of
the current 3 uses of HashTable (and I am going to add another use that
doesn't need it), and that the default PdbHashTraits isn't used outside
of tests.
While here, also re-enable 3 checks in the test that were commented out
(which requires making HashTableInternals templated and giving FooBar
an operator==).
Split AArch64FrameLowering::resolveFrameIndexReference in two parts
* Finding frame offset for the index.
* Finding base register and offset to that register.
The second part will be used to implement a virtual frame pointer in
armv8.5 MTE stack instrumentation lowering.
Matt Arsenault [Fri, 12 Jul 2019 20:12:17 +0000 (20:12 +0000)]
AMDGPU: Drop remnants of byval support for shaders
Before 2018, mesa used to use byval interchangably with inreg, which
didn't really make sense. Fix tests still using it to avoid breaking
in a future commit.
[SystemZ] Fix addcarry of addcarry of const carry (PR42606)
This fixes https://bugs.llvm.org/show_bug.cgi?id=42606 by extending
D64213. Instead of only checking if the carry comes from a matching
operation, we now check the full chain of carries. Otherwise we might
custom lower the outermost addcarry, but then generically legalize
an inner addcarry.
The column field is missing for all inline sites, currently it's always
zero. This changes populates DW_AT_call_column field for inline sites.
Test case modified to cover this change.
All callers had a PDBFile object at hand, so call
Pdb.createIndexedStream() instead, which pre-populates all the arguments
(and returns nullptr for kInvalidStreamIndex).
Also change safelyCreateIndexedStream() to only take the string index,
and update callers. Make the method public and call it in two places
that manually did the bounds checking before.
[SystemZ] Add support for new cpu architecture - arch13
This patch series adds support for the next-generation arch13
CPU architecture to the SystemZ backend.
This includes:
- Basic support for the new processor and its features.
- Assembler/disassembler support for new instructions.
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of arch13 as host processor.
Note: No currently available Z system supports the arch13
architecture. Once new systems become available, the
official system name will be added as supported -march name.
We can use the C flag from NEG to detect that the input was zero.
Really we could probably use the Z flag too. But C matches what
we'd do for usubo 0, X.
Haven't found a test case for this due to the usubo formation
in CGP. But I verified if I comment out the CGP code this
transformation catches some of the same cases.
Philip Reames [Fri, 12 Jul 2019 17:05:35 +0000 (17:05 +0000)]
[IndVars] Use exit count reasoning to discharge obviously untaken exits
Continue in the spirit of D63618, and use exit count reasoning to prove away loop exits which can not be taken since the backedge taken count of the loop as a whole is provably less than the minimal BE count required to take this particular loop exit.
As demonstrated in the newly added tests, this triggers in a number of cases where IndVars was previously unable to discharge obviously redundant exit tests. And some not so obvious ones.
Simplify things a bit by removing unnecessary full type qualification.
This also happens to avoid a build break with now-unsupported
Visual Studio 2015.
Jordan Rose [Fri, 12 Jul 2019 16:05:09 +0000 (16:05 +0000)]
Support for dumping current PrettyStackTrace on SIGINFO (Ctrl-T)
Support SIGINFO (and SIGUSR1 for POSIX purposes) to tell what
long-running jobs are doing, as inspired by BSD tools (including on
macOS), by dumping the current PrettyStackTrace.
This adds a new kind of signal handler for non-fatal "info" signals,
similar to the "interrupt" handler that already exists for SIGINT
(Ctrl-C). It then uses that handler to update a "generation count"
managed by the PrettyStackTrace infrastructure, which is then checked
whenever a PrettyStackTraceEntry is pushed or popped on each
thread. If the generation has changed---i.e. if the user has pressed
Ctrl-T---the stack trace is dumped, though unfortunately it can't
include the deepest entry because that one is currently being
constructed/destructed.
Jay Foad [Fri, 12 Jul 2019 15:59:40 +0000 (15:59 +0000)]
[AMDGPU] Fix DPP combiner check for exec modification
Summary:
r363675 changed the exec modification helper function, now called
execMayBeModifiedBeforeUse, so that if no UseMI is specified it checks
all instructions in the basic block, even beyond the last use. That
meant that the DPP combiner no longer worked in any basic block that
ended with a control flow instruction, and in particular it didn't work
on code sequences generated by the atomic optimizer.
Fix it by reinstating the old behaviour but in a new helper function
execMayBeModifiedBeforeAnyUse, and limiting the number of instructions
scanned.
Jay Foad [Fri, 12 Jul 2019 15:02:59 +0000 (15:02 +0000)]
[AMDGPU] Restrict v_cndmask_b32 abs/neg modifiers to f32
Summary:
D64497 allowed abs/neg source modifiers on v_cndmask_b32 but it doesn't
make any sense to apply them to f16 operands; they would interpret the
bits of the value as an f32, giving nonsensical results. This patch
restricts them to f32 operands.
Tom Stellard [Fri, 12 Jul 2019 14:40:18 +0000 (14:40 +0000)]
cmake: Add INSTALL_WITH_TOOLCHAIN option to add_*_library macros
Summary:
This will simplify the macros by allowing us to remove the hard-coded
list of libraries that should be installed when
LLVM_INSTALL_TOOLCHAIN_ONLY is enabled.
Bryant Wong [Fri, 12 Jul 2019 13:09:39 +0000 (13:09 +0000)]
[gn] Tag unneeded variable.
When only building targets without assembly parsers (e.g. `llvm_targets_to_build
= ["NVPTX"]`), `all_targets` is empty and causes GN to warn about an
assigned-but-unused variable.
projects / llvm / log