EC only uses approved curves in FIPS mode.

Once there are buildable fips tests, some tests that are data driven
from files will need to be modified to exclude non approved curves in
fips mode.

These changes were tested by temporarily adding #define FIPS_MODE 1 to
all the modified source files.

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9081)

Fix s390x build errors and warnings

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9236)

OSSL_TRACE: enhance documentation and fix doc-nit errors

- Add the following macros to the NAME section:

  - with synopsis
        OSSL_TRACE_CANCEL, OSSL_TRACE, OSSL_TRACE_ENABLED
  - without synopsis
        OSSL_TRACEV (helper macro, not intended for public use)
        OSSL_TRACE[3-8] (omitted on purpose)

- Revise the NOTES section

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9224)

Cross-linked the man(1) pages of kdf & pkeyutl.

Fixes #8784

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9228)

OSSL_NAMEMAP: make names case insensitive

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8967)

Add a namemap test

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8967)

Replumbing: add support for multiple names per algorithm

Algorithms may have multiple names, as seen in the legacy names
database.  We need to support that as well.

This implementations modifies ossl_namemap to support multiple names
for the same identifier.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8967)

Allow AES XTS decryption using duplicate keys.

This feature is enabled by default outside of FIPS builds
which ban such actions completely.

Encryption is always disallowed and will generate an error.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9112)

Enhance and update the docs of the internal ossl_provider API

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9200)

Change OSSL_PARAM return size to not be a pointer.

Instead of referencing the return size from the OSSL_PARAM structure, make the
size a field within the structure.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9135)

Add documentation for CRYPTO_memcmp.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9225)

crypto/trace.c: Remove unexisting categories

Reverts an inadvertent change from commit
fe26f798526c14a3f8c9bb55d0eaf8eaa0d086e1

Fixes #9220

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9218)

OSSL_TRACE: ensure it's initialised

When OSSL_TRACE functionality is called before anything else, it finds
itself uninitialised, i.e. its global lock hasn't been created yet.

Fortunately, we have an internal general setup function for the trace
functionality, that makes for a perfect spot to trigger initialisation.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9212)

Handle CTRL-C as non-redoable abort signal

This is a bit annoying, if for instance "openssl genrsa -aes128"
tries to read a 4+ character size password, but CTRL-C does no longer
work after a RETURN key, since the flag UI_FLAG_REDOABLE is set by
UI_set_result_ex, together with the error "You must type in 4 to 1023 characters".
Thus remove the REDOABLE flag to allow CTRL-C to work.

[extended tests]

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9170)

Remove OPENSSL_memcmp.

After avoiding OPENSSL_memcmp for EC curve comparison, there are no remaining
uses in the source code.  The function is only defined in an internal header
and thus should be safe to remove for 3.0.0.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/9207)

Print thread IDs nicely.

Remove the union that effectively cast thread IDs to long integers before
display and instead print a hex dump of the entire object.

Refer #9191

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9194)

test/testutil/init.c, apps/openssl.c: add trace cleanup handle earlier

It turned out that the internal trace cleanup handler was added too
late, so it would be executed before OPENSSL_cleanup().
This results in address errors, as the trace code that's executed in
OPENSSL_cleanup() itself tries to reach for data that's been freed at
that point.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9196)

Update test/README

Changed a bad reference: test/Makefile -> test/build.info

Add ../apps/include as include path to include opt.h used by test/testutil.h.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9154)

Add SSL_shutdown to SSL_get_error's documentation

SSL_shutdown can fail if called during initialization, and in such case, it'll
add an error to the error queue. This adds SSL_shutdown to the list of functions
that should preceed the call to SSL_get_error.

CLA: trivial

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/7465)

Fix UEFI build on FreeBSD by not including system headers

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9149)

Fix a doc-nits failure

We need blank lines on each side of a section heading.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9192)

Fix and document BIO_FLAGS_NONCLEAR_RST behavior on memory BIO

The BIO_FLAGS_NONCLEAR_RST flag behavior was not properly documented
and it also caused the length to be incorrectly set after the reset
operation.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9179)

Add some internal documentation for some thread related functions

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9186)

Provide an ability to deregister thread stop handlers

If a provider gets unloaded then any thread stop handlers that it had
registered will be left hanging. We should clean them up before tearing
down the provider.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9186)

Add tracing capability in test utilities

If a test program goes wrong, it's sometimes helpful to be able to
trace what goes on in libcrypto and libssl.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9191)

Add extra error text in the property parser

With properties being specified in all kinds of places, including hard
coded in providers, it's not always easy to figure out exactly what
string was incorrect when the parser would just say something like
'parse failed' with no more details.

Adding extra data to the error, showing exactly what string is
incorrect, helps a bit.  At the very least, this gives anyone
interested something to grep for.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9190)

Don't create an OPENSSL_CTX twice

The fips provider was creating the OPENSSL_CTX twice due to a previous
merge error.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9184)

ARIA documentation titled itself AES

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9188)

Change ERR_add_error_[v]data to append

The "add error data" functions now append to the current error.
Add a test for this.
Cleanup some of the ERR_put functions.
In the FIPS module, always append "(in the FIPS module)" to any errors.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9181)

crypto/modes/build.conf: Fix MODES asm mistakes

The old rule in Configure was that if the asm source had a file name
with 'ghash-' as part of the name, GHASH_ASM should be defined.  Since
none of the aarch64 asm files has such a name, that macro shouldn't
have been defined.

Fixes #9173

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9178)

crypto/aes/build.info: Fix AES assembler specs

Two mistakes were made:

1. AES_ASM for x86 was misplaced
2. sse2 isn't applicable for x86_64 code

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9177)

Following the previous 2 commits also move ecpointformats out of session

The previous 2 commits moved supported groups and ciphers out of the
session object to avoid race conditions. We now also move ecpointformats
for consistency. There does not seem to be a race condition with access
to this data since it is only ever set in a non-resumption handshake.
However, there is no reason for it to be in the session.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)

Fix a race condition in ciphers handling

Similarly to the previous commit we were storing the peer offered list
of ciphers in the session. In practice there is no need for this
information to be avilable from one resumption to the next since this
list is specific to a particular handshake. Since the session object is
supposed to be immutable we should not be updating it once we have decided
to resume. The solution is to remove the session list out of the session
object.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)

Fix a race condition in supported groups handling

In TLSv1.3 the supported groups can be negotiated each time a handshake
occurs, regardless of whether we are resuming or not. We should not store
the supported groups information in the session because session objects
can be shared between multiple threads and we can end up with race
conditions. For most users this won't be seen because, by default, we
use stateless tickets in TLSv1.3 which don't get shared. However if you
use SSL_OP_NO_TICKET (to get stateful tickets in TLSv1.3) then this can
happen.

The answer is to move the supported the supported group information into
the SSL object instead.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9162)

Fix error handling at openssl_strerror_r

When bufsize == 0, openssl_strerror_r should return 0 (if _GNU_SOURCE is defined),
to be consistent with non-_GNU_SOURCE variants, which exhibit the same behavior.
Fix a few cases, where the return value of openssl_strerror_r was ignored.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9163)

 Swap #if blocks in uid.c so target platform gets checked before host

This avoids the case where a UEFI build on FreeBSD tries to call the system
issetugid function instead of returning 0 as it should do.

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from #9158)

Standardise the function naming conventions in initthread.c

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)

Document OPENSSL_thread_stop_ex()

This new function works in the same way as OPENSSL_thread_stop() but
for a specified OPENSSL_CTX.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)

Add the function OPENSSL_thread_stop_ex()

This adds the ability to clean up a thread on a per OPENSSL_CTX basis.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)

Tell the FIPS provider about thread stop events

The RAND code needs to know about threads stopping in order to cleanup
local thread data. Therefore we add a callback for libcrypto to tell
providers about such events.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)

Provide a version of ossl_init_thread_start that works in FIPS mode

This will need to be hooked up in a later commit with an event sent to
the FIPS provider informing it of thread stop events.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)

Split thread intialisation and handling out of init.c

We're going to need some of these functions in the FIPS module, but most
of the rest of the code in init.c is not needed. Therefore we split it out.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)

Convert thread stop handling into a publish/subscribe model

In later commits this will allow providers to subscribe to thread stop
events. We will need this in the FIPS module. We also make thread stop
handling OPENSSL_CTX aware (different OPENSSL_CTXs may have different
thread local data that needs cleaning up).

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)

Add the function openssl_ctx_get_concrete()

This adds the ability to take an OPENSSL_CTX parameter and either return it
as is (unchanged), or if it is NULL return a pointer to the default ctx.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9040)

Configure: final cleanup of asm related things

Remove the *_asm templates in Configurations/00-base-templates.conf,
all attempts to inherit them, and the asm() perl function.

[extended tests]

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move padlock_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move keccak1600_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move poly1305_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move chacha_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move modes_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move cmll_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move wp_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move rc5_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move rmd160_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move rc4_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move cast_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move sha1_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move md5_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move bf_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move aes_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move des_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move ec_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move cpuid_asm_src file information to build.info files

Also took away the internal 'debug-linux-ia32-aes' config target, as
it's broken (refers to files that no longer exist).

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move bn_asm_src file information to build.info files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Configure: add mechanism to specify asm target architecture

As preparation for moving asm file specs to build.info files, we must
make sure there is still some base information to help select the
correct files.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Move uplink file information to build.info files

This file information was hidden in config target files, when they
should really be part of build.info like any other file we build
from.  With build.info variables, the task became much easier.

We take the opportunity to move apps_init_src and apps_aux_src to
apps/build.info as well, and to clean up apps/build.info.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Configure: add mechanism to specify uplink target architecture

As preparation for moving uplink file specs to build.info files, we
must make sure there is still some base information to help select the
correct files.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Configure: allow conditions and variable values to have variable references

This will allow building variables on other variables, and to have
conditions based on variable contents.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9166)

Configure: AIX needs a specific DSO extension function

DSO extensions are normally derived from platform->shlibextsimple() on
Unix.  This isn't the case for AIX, so it needs to define its own DSO
extension specifically.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9005)

Fix no-ec with no-dh

Make sure that the combination of no-ec with no-dh builds successfully.
If neither ec or dh are available then TLSv1.3 is not possible.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9156)

Allow TLSv1.3 in a no-ec build

Now that we have TLSv1.3 FFDHE support there is no reason why we should
not allow TLSv1.3 to be used in a no-ec build. This commit enables that
to happen.

It also fixes no-ec which was previously broken.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9156)

Replumbing: Adapt the default and legacy providers to use library context upcall

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9160)

Replumbing: Adapt the FIPS module to use the library context upcall

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9160)

Replumbing: offer a core upcall to get the provider object's library context

The FIPS module currently has "magic" support to have the library
context become the provider context within the core code, for the FIPS
module's inner provider.

We replace that with a core upcall that returns the library context
associated with a provider object.  That way, the FIPS module can
handle the assignment of the inner provider context itself.  This
allows the FIPS module (and any other provider module that wishes to
use a similar mechanism) to define for itself what the provider
context is.  It's currently simply a pointer to a library context,
but may contain other stuff as well in the future.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9160)

crypto/ppccap.c: Fix FIPS build on PPC

Some code was temporarly disabled in the FIPS module because SHA other
SHA1 hadn't been ported.  Now that they have, we must enable this code
again.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9168)

Better document specific OSSL_PARAM symbols.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9114)

Add documentation for X509_cmp and related APIs

Fixes: #9088
Functions documented in this commit: X509_cmp, X509_NAME_cmp,
X509_issuer_and_serial_cmp, X509_issuer_name_cmp, X509_subject_name_cmp,
X509_CRL_cmp, X509_CRL_match

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9091)

Use variables in build.info files where it's worth the while

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9144)

Configure: Add support for variables in build.info files

Variables have the syntax defined with this regular expression:

    \$([[:alpha:]_][[:alnum:]_]*)

They are always local to the build.info they are defined in, and are
defined like this:

    $VAR=text

Expansion is done very simply, any reference to the variable (with the
exact same variable syntax) is replaced with its defined value.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9144)

Fix building with enable-trace

Tracing doesn't work in the FIPS module. Ensure we switch it off there.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9159)

Fix no-dh

The recent TLSv1.3 FFDHE support missed a few OPENSSL_NO_DH guards.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9153)

Update the d2i docs to reflect reality

The d2i docs state that if an error occurs then |*a| is not freed. This
is not correct. On error it is freed and set to NULL. We update the docs
to say this, and also discuss the fact that this behaviour was inconsistent
prior to OpenSSL 1.1.0.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9146)

ts: Fix awkward sentences in the documentation and the default digest

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9143)

ts: Use sha256 as default digest for TS query

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7900)

Fix typo mistake on calls to SSL_ctrl in ssl.h

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9140)

Update docs for TLS1.3 FFDHE

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8178)

Add testcase for TLS1.3 FFDHE

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8178)

TLS1.3 FFDHE Support

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8178)

Enable find-doc-nits to find undocumented symbols since 1.1.1

A previous commit added the ability to find newly undocumented symbols.
We extend this capability to check anything that was newly added since
1.1.1 which is undocumented. A new option -o is added to find-doc-nits
to amend the behaviour of -v or -e to check symbols that were newly
added since the release of 1.1.1.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9094)

Fix an incorrect macro

A macro was missing a space which was confusing find-doc-nits

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9094)

i2d_PublicKey was listed in 2 different man pages

find-doc-nits complains if a symbol is documented in more than one
location.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9094)

Make find-doc-nits check for newly added undocumented symbols

We create lists of undocumented functions and macros as they are now so
that find-doc-nits can check for newly introduced functions/macros that
are undocumented.

This works in a similar way to the -u and -d options to find-doc-nits.
These count undocumented symbols and print a detailed list of undocumented
symbols repsectively. This commit adds the -v and -e options to restrict
the count/detailed list to newly added undocumented symbols only.

There is also a new -s option that does the same as -e except that it
produces no output if there are no newly undocumented symbols.

We also amend "make doc-nits" to add the -s option which should cause
travis to fail if a PR adds undocumented symbols.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9094)

Configure: count basenames for all library sources

Make sure that each basename only appears once.  This is due to the
static library archiver on Unix, that indexes archived object files by
base name only, thereby making base name clashes...  interesting.

This is a safety net for OpenSSL developer!

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9133)

Ensure code is compiled with correct BIGNUM assembler defines

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9130)

Add some dummy BIGNUM calls from inside the FIPS provider

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9130)

Make BIGNUM code available from within the FIPS module

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9130)

Temporarily disable RAND call in FIPS_MODE until RAND is available

Other commits will enable the RAND code in FIPS_MODE. Until those commits
are in place we temporarily disable making RAND calls while in FIPS_MODE.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9130)

Convert bn_rand.c to use EVP

Replace the low level SHA512_* function calls with EVP calls.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9130)

Create BN_CTX_new_ex() and BN_CTX_secure_new_ex()

These variants of BN_CTX_new() and BN_CTX_secure_new() enable passing
an OPENSSL_CTX so that we can access this where needed throughout the
BIGNUM sub library.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9130)

Remove redundant include

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9137)