Richard Trieu [Wed, 22 Feb 2017 22:22:42 +0000 (22:22 +0000)]
[ODRHash] static_cast and Stmt hashing.
Add support for static_cast in classes. Add pointer-independent profiling for
Stmt's, sharing most of the logic with Stmt::Profile. This is the first of the
deep sub-Decl diffing for error messages.
Richard Smith [Wed, 22 Feb 2017 22:09:50 +0000 (22:09 +0000)]
PR32034: Evaluate _Atomic(T) in-place when T is a class or array type.
This is necessary in order for the evaluation of an _Atomic initializer for
those types to have an associated object, which an initializer for class or
array type needs.
Bob Haarman [Wed, 22 Feb 2017 20:29:39 +0000 (20:29 +0000)]
stop using associative comdats for SEH filter functions
Summary: We implement structured exception handling (SEH) by generating filter functions for functions that use exceptions. Currently, we use associative comdats to ensure that the filter functions are preserved if and only if the functions we generated them for are preserved. This can lead to problems when generating COFF objects - LLVM may decide to inline a function that uses SEH and remove its body, at which point we will end up with a comdat that COFF cannot represent. To avoid running into that situation, this change makes us not use associative comdats for SEH filter functions. We can still get the benefits we used the associative comdats for: we will always preserve filter functions we use, and dead stripping can eliminate the ones we don't use.
[CodeGen] Note where we add ABI-specific args in ctors. NFC.
Meta: The ultimate goal is to teach ExtParameterInfo about
pass_object_size attributes. This is necessary for that, since our
ExtParameterInfo is a bit buggy in C++. I plan to actually make use of
this Prefix/Suffix info in the near future, but I like small
single-purpose changes. Especially when those changes are hard to
actually test...
At the moment, some of our C++-specific CodeGen pretends that ABIs can
only add arguments to the beginning of a function call. This isn't quite
correct: args can be appended to the end, as well. It hasn't mattered
much until now, since we seem to only use this "number of arguments
added" data when calculating the ExtParameterInfo to use when making a
CGFunctionInfo. Said ExtParameterInfo is currently only used for
ParameterABIs (Swift) and ns_consumed (ObjC).
So, this patch allows ABIs to indicate whether args they added were at
the beginning or end of an argument list. We can use this information to
emit ExtParameterInfos more correctly, though like said, that bit is
coming soon.
Richard Smith [Wed, 22 Feb 2017 20:01:55 +0000 (20:01 +0000)]
Improve support for 'decltype(auto)' in template template parameter matching.
A 'decltype(auto)' parameter can match any other kind of non-type template
parameter, so should be usable in place of any other parameter in a template
template argument. The standard is sadly extremely unclear on how this is
supposed to work, but this seems like the obviously-correct result.
It's less clear whether an 'auto' parameter should be able to match
'decltype(auto)', since the former cannot be used if the latter turns out to be
used for a reference type, but if we disallow that then consistency suggests we
should also disallow 'auto' matching 'T' for the same reason, defeating
intended use cases of the feature.
Jonas Hahnfeld [Wed, 22 Feb 2017 06:49:10 +0000 (06:49 +0000)]
[OpenMP] Generate better diagnostics for cancel and cancellation point
checkNestingOfRegions uses CancelRegion to determine whether cancel and
cancellation point are valid in the given nesting. This leads to unuseful
diagnostics if CancelRegion is invalid. The given test case has produced:
region cannot be closely nested inside 'parallel' region
As a solution, introduce checkCancelRegion and call it first to get the
expected error:
one of 'for', 'parallel', 'sections' or 'taskgroup' is expected
This is because we were always selecting the version of
`@llvm.objectsize` that takes an i8* in CodeGen. Passing an i32* as an
i8* makes LLVM very unhappy.
(Yes, I'm surprised that this remained uncaught for so long, too. :) )
As an added bonus, we'll now also use the appropriate address space when
emitting @llvm.objectsize calls.
Richard Trieu [Wed, 22 Feb 2017 01:11:25 +0000 (01:11 +0000)]
Add more ODR checking.
Add the basics for the ODRHash class, which will only process Decl's from
a whitelist, which currently only has AccessSpecDecl. Different access
specifiers in merged classes can now be detected.
Richard Smith [Tue, 21 Feb 2017 23:49:18 +0000 (23:49 +0000)]
Fix deduction of type of pack-expanded non-type template parameter.
We need to look through the PackExpansionType in the parameter type when
deducing, and we need to consider the possibility of deducing arguments for
packs that are not lexically mentioned in the pattern (but are nonetheless
deducible) when figuring out which packs are covered by a pack deduction scope.
Jacob Gravelle [Tue, 21 Feb 2017 22:37:27 +0000 (22:37 +0000)]
Declare lgamma library builtins as never being const
Summary:
POSIX requires lgamma writes to an external global variable, signgam.
This prevents annotating lgamma with readnone, which is incorrect on
targets that write to signgam.
Taewook Oh [Tue, 21 Feb 2017 22:30:55 +0000 (22:30 +0000)]
Fix for pr31836 - pp_nonportable_path on absolute paths: broken delimiters
Summary: This is a patch for PR31836. As the bug replaces the path separators in the included file name with the characters following them, the test script makes sure that there's no "Ccase-insensitive-include-pr31836.h" in the warning message.
Dehao Chen [Tue, 21 Feb 2017 20:36:21 +0000 (20:36 +0000)]
Only enable AddDiscriminator pass when -fdebug-info-for-profiling is true
Summary: AddDiscriminator pass is only useful for sample pgo. This patch restricts AddDiscriminator to -fdebug-info-for-profiling so that it does not introduce unecessary debug size increases for non-sample-pgo builds.
Richard Smith [Tue, 21 Feb 2017 08:42:39 +0000 (08:42 +0000)]
Fix lookup through injected-class-names in implicit deduction guides in the
case where the class template has a parameter pack.
Checking of the template arguments expects an "as-written" template argument
list, which in particular does not have any parameter packs. So flatten the
packs into separate arguments before passing them in.
Richard Smith [Tue, 21 Feb 2017 06:30:38 +0000 (06:30 +0000)]
PR32010: Fix template argument depth mixup when forming implicit constructor
template deduction guides for class template argument deduction.
Ensure that we have a local instantiation scope for tracking the instantiated
parameters. Additionally, unusually, we're substituting at depth 1 and leaving
depth 0 alone; make sure that we don't reduce template parameter depth by 2 for
inner parameters in the process. (This is probably also broken for alias
templates in the case where they're expanded within a dependent context, but
this patch doesn't fix that.)
Using the constructed name for the class properties with dot syntax may
yield an inappropriate selector (i.e. if it is specified via property
attributes). Prefer the declaration for the selector, falling back to
the constructed name otherwise.
Daniel Jasper [Mon, 20 Feb 2017 14:51:16 +0000 (14:51 +0000)]
clang-format: [JS] Improve line-wrapping behavior of template strings.
Specifically, similar to other blocks, clang-format now wraps both
after "${" and before the corresponding "}", if the contained
expression spans multiple lines.
Serge Pavlov [Sat, 18 Feb 2017 06:04:15 +0000 (06:04 +0000)]
Process attributes 'ifunc' and 'alias' when checking for redefinition
These attributes effectively turn a non-defining declaration into a
definition, so the case when the declaration already has a body must
be diagnosed properly.
Vedant Kumar [Sat, 18 Feb 2017 02:02:55 +0000 (02:02 +0000)]
[profiling] Make a test more explicit. NFC.
The cxx-structors.cpp test checks that some instrumentation doesn't
appear, but it should be more explicit about which instrumentation it
actually expects to appear.
Vedant Kumar [Sat, 18 Feb 2017 01:50:14 +0000 (01:50 +0000)]
[profiling] Tighten test cases which refer to "profn" vars. NFC.
The frontend can't see "__profn" profile name variables after IRGen
because llvm throws these away now. Tighten up some test cases which
checked for the non-existence of those variables.
Richard Smith [Sat, 18 Feb 2017 00:32:02 +0000 (00:32 +0000)]
[modules] Load the ModuleOffsetMap from the module header lazily.
If we never need to map any ID within the module to its global ID, we don't
need the module offset map. If a compilation transitively depends on lots of
unused module files, this can result in a modest performance improvement.
Vedant Kumar [Fri, 17 Feb 2017 23:22:59 +0000 (23:22 +0000)]
Retry^2: [ubsan] Reduce null checking of C++ object pointers (PR27581)
This patch teaches ubsan to insert exactly one null check for the 'this'
pointer per method/lambda.
Previously, given a load of a member variable from an instance method
('this->x'), ubsan would insert a null check for 'this', and another
null check for '&this->x', before allowing the load to occur.
Similarly, given a call to a method from another method bound to the
same instance ('this->foo()'), ubsan would a redundant null check for
'this'. There is also a redundant null check in the case where the
object pointer is a reference ('Ref.foo()').
This patch teaches ubsan to remove the redundant null checks identified
above.
Testing: check-clang, check-ubsan, and a stage2 ubsan build.
I also compiled X86FastISel.cpp with -fsanitize=null using
patched/unpatched clangs based on r293572. Here are the number of null
checks emitted:
Vedant Kumar [Fri, 17 Feb 2017 23:22:55 +0000 (23:22 +0000)]
[ubsan] Pass a set of checks to skip to EmitTypeCheck() (NFC)
CodeGenFunction::EmitTypeCheck accepts a bool flag which controls
whether or not null checks are emitted. Make this a bit more flexible by
changing the bool to a SanitizerSet.
Needed for an upcoming change which deals with a scenario in which we
only want to emit null checks.
Carlo Bertolli [Fri, 17 Feb 2017 21:29:13 +0000 (21:29 +0000)]
[OpenMP] Prepare Sema for initial implementation for pragma 'distribute parallel for'
https://reviews.llvm.org/D29922
This patch adds two fields for use in the implementation of 'distribute parallel for':
The increment expression for the distribute loop. As the chunk assigned to a team is executed by multiple threads within the 'parallel for' region, the increment expression has to correspond to the value returned by the related runtime call (for_static_init).
The upper bound of the innermost loop ('for' in 'distribute parallel for') is not the globalUB expression normally used for pragma 'for' when found in isolation. It is instead the upper bound of the chunk assigned to the team ('distribute' loop). In this way, we prevent teams from executing chunks assigned to other teams.
The use of these two fields can be see in a related explanatory patch:
https://reviews.llvm.org/D29508
Jonas Hahnfeld [Fri, 17 Feb 2017 18:32:51 +0000 (18:32 +0000)]
[OpenMP] Remove barriers at cancel and cancellation point
This resolves a deadlock with the cancel directive when there is no explicit
cancellation point. In that case, the implicit barrier acts as cancellation
point. After removing the barrier after cancel, the now unmatched barrier for
the explicit cancellation point has to go as well.
This has probably worked before rL255992: With the calls for the explicit
barrier, it was sure that all threads passed a barrier before exiting.
was turned into:
ALWAYS_INLINE::std::string getName() ...
If it turns out that clang-format is failing to clean up a lot of the
existing spaces now, we can add more analyses of the identifier. It
should not currently. Cases where clang-format breaks nested name
specifiers should be fine as clang-format wraps after the "::". Thus, a
line getting longer and then shorter again should lead to the same
original code.
Richard Trieu [Fri, 17 Feb 2017 05:54:30 +0000 (05:54 +0000)]
Add better ODR checking for modules.
A slightly weaker form of ODR checking than previous attempts, but hopefully
won't break the modules build bot. Future work will be needed to catch all
cases.
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taken from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Vedant Kumar [Fri, 17 Feb 2017 02:03:51 +0000 (02:03 +0000)]
Retry: [ubsan] Reduce null checking of C++ object pointers (PR27581)
This patch teaches ubsan to insert exactly one null check for the 'this'
pointer per method/lambda.
Previously, given a load of a member variable from an instance method
('this->x'), ubsan would insert a null check for 'this', and another
null check for '&this->x', before allowing the load to occur.
Similarly, given a call to a method from another method bound to the
same instance ('this->foo()'), ubsan would a redundant null check for
'this'. There is also a redundant null check in the case where the
object pointer is a reference ('Ref.foo()').
This patch teaches ubsan to remove the redundant null checks identified
above.
Testing: check-clang and check-ubsan. I also compiled X86FastISel.cpp
with -fsanitize=null using patched/unpatched clangs based on r293572.
Here are the number of null checks emitted:
Vedant Kumar [Fri, 17 Feb 2017 01:05:42 +0000 (01:05 +0000)]
[ubsan] Reduce null checking of C++ object pointers (PR27581)
This patch teaches ubsan to insert exactly one null check for the 'this'
pointer per method/lambda.
Previously, given a load of a member variable from an instance method
('this->x'), ubsan would insert a null check for 'this', and another
null check for '&this->x', before allowing the load to occur.
Similarly, given a call to a method from another method bound to the
same instance ('this->foo()'), ubsan would a redundant null check for
'this'. There is also a redundant null check in the case where the
object pointer is a reference ('Ref.foo()').
This patch teaches ubsan to remove the redundant null checks identified
above.
Testing: check-clang and check-ubsan. I also compiled X86FastISel.cpp
with -fsanitize=null using patched/unpatched clangs based on r293572.
Here are the number of null checks emitted:
This patch implements codegen for the reduction clause on
any teams construct for elementary data types. It builds
on parallel reductions on the GPU. Subsequently,
the team master writes to a unique location in a global
memory scratchpad. The last team to do so loads and
reduces this array to calculate the final result.
This patch emits two helper functions that are used by
the OpenMP runtime on the GPU to perform reductions across
teams.
Patch by Tian Jin in collaboration with Arpith Jacob
This patch implements codegen for the reduction clause on
any parallel construct for elementary data types. An efficient
implementation requires hierarchical reduction within a
warp and a threadblock. It is complicated by the fact that
variables declared in the stack of a CUDA thread cannot be
shared with other threads.
The patch creates a struct to hold reduction variables and
a number of helper functions. The OpenMP runtime on the GPU
implements reduction algorithms that uses these helper
functions to perform reductions within a team. Variables are
shared between CUDA threads using shuffle intrinsics.
An implementation of reductions on the NVPTX device is
substantially different to that of CPUs. However, this patch
is written so that there are minimal changes to the rest of
OpenMP codegen.
The implemented design allows the compiler and runtime to be
decoupled, i.e., the runtime does not need to know of the
reduction operation(s), the type of the reduction variable(s),
or the number of reductions. The design also allows reuse of
host codegen, with appropriate specialization for the NVPTX
device.
While the patch does introduce a number of abstractions, the
expected use case calls for inlining of the GPU OpenMP runtime.
After inlining and optimizations in LLVM, these abstractions
are unwound and performance of OpenMP reductions is comparable
to CUDA-canonical code.
Patch by Tian Jin in collaboration with Arpith Jacob
This patch implements codegen for the reduction clause on
any parallel construct for elementary data types. An efficient
implementation requires hierarchical reduction within a
warp and a threadblock. It is complicated by the fact that
variables declared in the stack of a CUDA thread cannot be
shared with other threads.
The patch creates a struct to hold reduction variables and
a number of helper functions. The OpenMP runtime on the GPU
implements reduction algorithms that uses these helper
functions to perform reductions within a team. Variables are
shared between CUDA threads using shuffle intrinsics.
An implementation of reductions on the NVPTX device is
substantially different to that of CPUs. However, this patch
is written so that there are minimal changes to the rest of
OpenMP codegen.
The implemented design allows the compiler and runtime to be
decoupled, i.e., the runtime does not need to know of the
reduction operation(s), the type of the reduction variable(s),
or the number of reductions. The design also allows reuse of
host codegen, with appropriate specialization for the NVPTX
device.
While the patch does introduce a number of abstractions, the
expected use case calls for inlining of the GPU OpenMP runtime.
After inlining and optimizations in LLVM, these abstractions
are unwound and performance of OpenMP reductions is comparable
to CUDA-canonical code.
Patch by Tian Jin in collaboration with Arpith Jacob
[OpenCL][Doc] Added OpenCL vendor extension description to user manual doc
Added description of a new feature that allows to specify
vendor extension in flexible way using compiler pragma instead
of modifying source code directly (committed in clang@r289979).
Erik Verbruggen [Thu, 16 Feb 2017 09:49:30 +0000 (09:49 +0000)]
Cache FileID when translating diagnostics in PCH files
Modules/preambles/PCH files can contain diagnostics, which, when used,
are added to the current ASTUnit. For that to work, they are translated
to use the current FileManager's FileIDs. When the entry is not the
main file, all local source locations will be checked by a linear
search. Now this is a problem, when there are lots of diagnostics (say,
25000) and lots of local source locations (say, 440000), and end up
taking seconds when using such a preamble.
The fix is to cache the last FileID, because many subsequent diagnostics
refer to the same file. This reduces the time spent in
ASTUnit::TranslateStoredDiagnostics from seconds to a few milliseconds
for files with many slocs/diagnostics.
This fixes PR31353.
Differential Revision: https://reviews.llvm.org/D29755
Richard Trieu [Thu, 16 Feb 2017 04:53:40 +0000 (04:53 +0000)]
Add better ODR checking for modules.
Recommit r293585 that was reverted in r293611 with new fixes. The previous
issue was determined to be an overly aggressive AST visitor from forward
declared objects. The visitor will now only deeply visit certain Decl's and
only do a shallow information extraction from all other Decl's.
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taken from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Faisal Vali [Thu, 16 Feb 2017 04:12:21 +0000 (04:12 +0000)]
[cxx1z-constexpr-lambda] Implement captures - thus completing implementation of constexpr lambdas.
Enable evaluation of captures within constexpr lambdas by using a strategy similar to that used in CodeGen:
- when starting evaluation of a lambda's call operator, create a map from VarDecl's to a closure's FieldDecls
- every time a VarDecl (or '*this) that represents a capture is encountered while evaluating the expression via the expression evaluator (specifically the LValueEvaluator) in ExprConstant.cpp - it is replaced by the corresponding FieldDecl LValue (an Lvalue-to-Rvalue conversion on this LValue representation then determines the right rvalue when needed).
Thanks to Richard Smith and Hubert Tong for their review and feedback!
Richard Smith [Thu, 16 Feb 2017 03:49:44 +0000 (03:49 +0000)]
Add missing "deduced A == A" check for function template partial ordering.
This appears to be the only template argument deduction context where we were
missing this check. Surprisingly, other implementations also appear to miss
the check in this case; it may turn out that important code is relying on
the widespread non-conformance here, in which case we'll need to reconsider.