Chandler Carruth [Mon, 28 Nov 2016 10:42:21 +0000 (10:42 +0000)]
[PM] Remove weird marking of invalidated analyses as "preserved".
This never made a lot of sense. They've been invalidated for one IR unit
but they aren't really preserved in any normal sense. It seemed like it
would be an elegant way of communicating to outer IR units that pass
managers and adaptors had already handled invalidation, but we've since
ended up adding sets that model this more clearly: we're now using
the 'AllAnalysesOn<IRUnitT>' set to handle cases where the trick of
"preserving" invalidated analyses didn't work.
This patch moves to rely on that technique exclusively and removes the
cumbersome API aspect of updating the preserved set when doing
invalidation. This in turn will simplify a *number* of upcoming patches.
This has a side benefit of exposing a number of places where we were
failing to mark the 'AllAnalysesOn<IRUnitT>' set as preserved. This
patch fixes those, and with those fixes shouldn't change any observable
behavior.
Craig Topper [Sun, 27 Nov 2016 21:36:54 +0000 (21:36 +0000)]
[X86] Add SHL by 1 to the load folding tables.
I don't think isel selects these today, favoring adding the register to itself instead. But the load folding tables shouldn't be so concerned with what isel will use and just represent the relationships.
Sanjay Patel [Sun, 27 Nov 2016 21:07:28 +0000 (21:07 +0000)]
[InstSimplify] allow integer vector types to use computeKnownBits
Note that the non-splat lshr+lshr test folded, but that does not
work in general. Something is missing or wrong in computeKnownBits
as the non-splat shl+shl test still shows.
Craig Topper [Sun, 27 Nov 2016 18:51:13 +0000 (18:51 +0000)]
[X86] Add TB_NO_REVERSE to entries in the load folding table where the instruction's load size is smaller than the register size.
If we were to unfold these, the load size would be increased to the register size. This is not safe to do since the enlarged load can do things like cross a page boundary into a page that doesn't exist.
I probably missed some instructions, but this should be a large portion of them.
Craig Topper [Sun, 27 Nov 2016 01:52:51 +0000 (01:52 +0000)]
[X86] Remove alignment restrictions from load folding table for some instructions that don't have a restriction.
Most of these are the SSE4.1 PMOVZX/PMOVSX instructions which all read less than 128-bits. The only other was PMOVUPD which by definition is an unaligned load.
Craig Topper [Sat, 26 Nov 2016 17:29:25 +0000 (17:29 +0000)]
[X86] Add a hasOneUse check to selectScalarSSELoad to keep the same load from being folded multiple times.
Summary: When selectScalarSSELoad is looking for a scalar_to_vector of a scalar load, it makes sure the load is only used by the scalar_to_vector. But it doesn't make sure the scalar_to_vector is only used once. This can cause the same load to be folded multiple times. This can be bad for performance. This also causes the chain output to be duplicated, but not connected to anything so chain dependencies will not be satisfied.
Sanjay Patel [Sat, 26 Nov 2016 15:01:59 +0000 (15:01 +0000)]
add optional param to copy metadata when creating selects; NFC
There are other spots where we can use this; we're currently dropping
metadata in some places, and there are proposed changes where we will
want to propagate metadata.
IRBuilder's CreateSelect() already has a parameter like this, so this
change makes the regular 'Create' API line up with that.
Craig Topper [Sat, 26 Nov 2016 07:20:57 +0000 (07:20 +0000)]
[AVX-512] Teach LowerFormalArguments to use the extended register class when available. Fix the avx512vl stack folding tests to clobber more registers or otherwise they use xmm16 after this change.
Craig Topper [Sat, 26 Nov 2016 02:14:00 +0000 (02:14 +0000)]
[X86][XOP] Add a reversed reg/reg form for VPROT instructions.
The W bit distinquishes which operand is the memory operand. But if the mod bits are 3 then the memory operand is a register and there are two possible encodings. We already did this correctly for several other XOP instructions.
Craig Topper [Sat, 26 Nov 2016 02:13:58 +0000 (02:13 +0000)]
[X86] Add SSE, AVX, and AVX2 version of MOVDQU to the load/store folding tables for consistency.
Not sure this is truly needed but we had the floating point equivalents, the aligned equivalents, and the EVEX equivalents. So this just makes it complete.
Craig Topper [Fri, 25 Nov 2016 23:21:34 +0000 (23:21 +0000)]
[AVX-512] Put the AVX-512 sections of the load folding tables into mostly alphabetical order. This is consistent with the older sections of the table. NFC
Craig Topper [Fri, 25 Nov 2016 16:48:05 +0000 (16:48 +0000)]
[AVX-512] Add support for changing VSHUFF64x2 to VSHUFF32x4 when its feeding a vselect with 32-bit element size.
Summary:
Shuffle lowering may have widened the element size of a i32 shuffle to i64 before selecting X86ISD::SHUF128. If this shuffle was used by a vselect this can prevent us from selecting masked operations.
This patch detects this and changes the element size to match the vselect.
I don't handle changing integer to floating point or vice versa as its not clear if its better to push such a bitcast to the inputs of the shuffle or to the user of the vselect. So I'm ignoring that case for now.
[Loop Unswitch] Patch to selective unswitch only the reachable branch instructions.
Summary:
The iterative algorithm for Loop Unswitching may render some of the branches unreachable in the unswitched loops.
Given the exponential nature of the algorithm, this is quite an overhead.
This patch fixes this problem by selectively unswitching only those branches within a loop that are reachable from the loop header.
Reviewers: Michael Zolothukin, Anna Thomas, Weiming Zhao.
Subscribers: llvm-commits.
Simon Pilgrim [Thu, 24 Nov 2016 15:12:56 +0000 (15:12 +0000)]
[X86][SSE] Improve UINT_TO_FP v2i32 -> v2f64
Vectorize UINT_TO_FP v2i32 -> v2f64 instead of scalarization (albeit still on the SIMD unit).
The codegen matches that generated by legalization (and is in fact used by AVX for UINT_TO_FP v4i32 -> v4f64), but has to be done in the x86 backend to account for legalization via 4i32.
Nikolai Bozhenov [Thu, 24 Nov 2016 13:23:35 +0000 (13:23 +0000)]
[x86] Fixing PR28755 by precomputing the address used in CMPXCHG8B
The bug arises during register allocation on i686 for
CMPXCHG8B instruction when base pointer is needed. CMPXCHG8B
needs 4 implicit registers (EAX, EBX, ECX, EDX) and a memory address,
plus ESI is reserved as the base pointer. With such constraints the only
way register allocator would do its job successfully is when the addressing
mode of the instruction requires only one register. If that is not the case
- we are emitting additional LEA instruction to compute the address.
It fixes PR28755.
Patch by Alexander Ivchenko <alexander.ivchenko@intel.com>
Nikolai Bozhenov [Thu, 24 Nov 2016 13:05:43 +0000 (13:05 +0000)]
[x86] Rewrite getAddressFromInstr helper function
- It does not modify the input instruction
- Second operand of any address is always an Index Register,
make sure we actually check for that, instead of a check for
an immediate value
Patch by Alexander Ivchenko <alexander.ivchenko@intel.com>
Simon Pilgrim [Thu, 24 Nov 2016 12:13:46 +0000 (12:13 +0000)]
[X86] Generalize CVTTPD2DQ/CVTTPD2UDQ and CVTDQ2PD/CVTUDQ2PD opcodes. NFCI
Replace the CVTTPD2DQ/CVTTPD2UDQ and CVTDQ2PD/CVTUDQ2PD opcodes with general versions.
This is an initial step towards similar FP_TO_SINT/FP_TO_UINT and SINT_TO_FP/UINT_TO_FP lowering to AVX512 CVTTPS2QQ/CVTTPS2UQQ and CVTQQ2PS/CVTUQQ2PS with illegal types.
Object: Simplify the IRObjectFile symbol iterator implementation.
Change the IRObjectFile symbol iterator to be a pointer into a vector of
PointerUnions representing either IR symbols or asm symbols.
This change is in preparation for a future change for supporting multiple
modules in an IRObjectFile. Although it causes an increase in memory
consumption, we can deal with that issue separately by introducing a bitcode
symbol table.
Matt Arsenault [Thu, 24 Nov 2016 00:26:47 +0000 (00:26 +0000)]
TRI: Add hook to pass scavenger during frame elimination
The scavenger was not passed if requiresFrameIndexScavenging was
enabled. I need to be able to test for the availability of an
unallocatable register here, so I can't create a virtual register for
it.
It might be better to just always use the scavenger and stop
creating virtual registers.
Greg Clayton [Wed, 23 Nov 2016 23:30:37 +0000 (23:30 +0000)]
Rely on a single DWARF version instead of having two copies
This patch makes AsmPrinter less reliant on DwarfDebug by relying on the DWARF version in the AsmPrinter's MCStreamer's MCContext. This allows us to remove the redundant DWARF version from DwarfDebug. It also lets us change code that used to access the AsmPrinter's DwarfDebug just to get to the DWARF version by changing the DWARF version accessor on AsmPrinter so that it grabs the version from its MCStreamer's MCContext.
projects / llvm / log