Tom Lane [Thu, 16 Mar 2006 18:11:17 +0000 (18:11 +0000)]
Fix invalid use of #if within a macro, per Laurenz Albe. Also try to
make the LDAP code's error messages look like they were written by someone
who had heard of our style guidelines.
Tom Lane [Thu, 16 Mar 2006 00:31:55 +0000 (00:31 +0000)]
Clean up representation of function RTEs for functions returning RECORD.
The original coding stored the raw parser output (ColumnDef and TypeName
nodes) which was ugly, bulky, and wrong because it failed to create any
dependency on the referenced datatype --- and in fact would not track type
renamings and suchlike. Instead store a list of column type OIDs in the
RTE.
Also fix up general failure of recordDependencyOnExpr to do anything sane
about recording dependencies on datatypes. While there are many cases where
there will be an indirect dependency (eg if an operator returns a datatype,
the dependency on the operator is enough), we do have to record the datatype
as a separate dependency in examples like CoerceToDomain.
Tom Lane [Tue, 14 Mar 2006 22:48:25 +0000 (22:48 +0000)]
Improve parser so that we can show an error cursor position for errors
during parse analysis, not only errors detected in the flex/bison stages.
This is per my earlier proposal. This commit includes all the basic
infrastructure, but locations are only tracked and reported for errors
involving column references, function calls, and operators. More could
be done later but this seems like a good set to start with. I've also
moved the ReportSyntaxErrorPosition logic out of psql and into libpq,
which should make it available to more people --- even within psql this
is an improvement because warnings weren't handled by ReportSyntaxErrorPosition.
Neil Conway [Mon, 13 Mar 2006 18:04:58 +0000 (18:04 +0000)]
Fix a number of syntax errors in contrib modules' uninstall scripts.
Most of the changes add the mandatory USING clause to DROP OPERATOR
CLASS statements. DROP TYPE is now DROP TYPE CASCADE; without
CASCADE a DROP TYPE fails due to the circular dependency on the
type's I/O functions. The DROP FUNCTION statements for the I/O
functions have been removed, as DROP TYPE CASCADE removes them
automatically. Patch from Michael Fuhr.
Neil Conway [Sat, 11 Mar 2006 01:19:22 +0000 (01:19 +0000)]
Remove a few places that attempted to define INT_MAX, SCHAR_MAX, and
similar constants if they were not previously defined. All these
constants must be defined by limits.h according to C89, so we can
safely assume they are present.
Tom Lane [Fri, 10 Mar 2006 23:19:00 +0000 (23:19 +0000)]
Recent changes in memory management in tuplesort.c had a problem: the
case where we run low on array slots before we run low on memory is much
more probable than I had thought, and so it's important to treat each
tape fairly in that case. To fix this, track per-tape slot allocations
just like we track per-tape space allocation. Also, in the FINALMERGE
code path avoid scanning all the input tapes when we really only need to
read from one. This should fix poor behavior with very large work_mem
as exhibited by Stefan Kaltenbrunner.
I didn't do anything about putting an upper bound on the number of tapes,
but maybe we should still consider that.
Neil Conway [Fri, 10 Mar 2006 20:15:28 +0000 (20:15 +0000)]
Implement 4 new aggregate functions from SQL2003. Specifically: var_pop(),
var_samp(), stddev_pop(), and stddev_samp(). var_samp() and stddev_samp()
are just renamings of the historical Postgres aggregates variance() and
stddev() -- the latter names have been kept for backward compatibility.
This patch includes updates for the documentation and regression tests.
The catversion has been bumped.
NB: SQL2003 requires that DISTINCT not be specified for any of these
aggregates. Per discussion on -patches, I have NOT implemented this
restriction: if the user asks for stddev(DISTINCT x), presumably they
know what they are doing.
Tom Lane [Fri, 10 Mar 2006 01:51:23 +0000 (01:51 +0000)]
Add a CHECK_FOR_INTERRUPTS() to the loop in ExecMakeTableFunctionResult.
Otherwise you can't cancel queries like select ... from generate_series(1,1000000).
Tom Lane [Wed, 8 Mar 2006 16:59:03 +0000 (16:59 +0000)]
Tweak trace_sort code to show the merge order (number of active input
tapes) for each merge step. This will give us some idea of how effective
the merge distribution algorithm is.
Tom Lane [Tue, 7 Mar 2006 23:46:24 +0000 (23:46 +0000)]
Further examination of ltsReleaseBlock usage shows that it's got a
performance issue during regular merge passes not only the 'final merge'
case. The original design contemplated that there would never be more
than about one free block per 'tape', hence no need for an efficient
method of keeping the free blocks sorted. But given the later addition
of merge preread behavior in tuplesort.c, there is likely to be about
work_mem worth of free blocks, which is not so small ... and for that
matter the number of tapes isn't necessarily small anymore either. So
we'd better get rid of the assumption entirely. Instead, I'm assuming
that the usage pattern will involve alternation between merge preread
and writing of a new run. This makes it reasonable to just add blocks
to the list without sorting during successive ltsReleaseBlock calls,
and then do a qsort() when we start getting ltsGetFreeBlock() calls.
Experimentation seems to confirm that there aren't many qsort calls
relative to the number of ltsReleaseBlock/ltsGetFreeBlock calls.
Tom Lane [Tue, 7 Mar 2006 19:06:50 +0000 (19:06 +0000)]
Repair old performance bug in tuplesort.c/logtape.c. In the case where
we are doing the final merge pass on-the-fly, and not writing the data
back onto a 'tape', the number of free blocks in the tape set will become
large, leading to a lot of time wasted in ltsReleaseBlock(). There is
really no need to track the free blocks anymore in this state, so add a
simple shutoff switch. Per report from Stefan Kaltenbrunner.
Tom Lane [Tue, 7 Mar 2006 17:32:22 +0000 (17:32 +0000)]
Turn off zero_damaged_pages in the right place (ie, in the autovac
process not in the postmaster) and with the right GucSource (needs to
be a nontransactional source since we've not started an xact yet).
Tom Lane [Tue, 7 Mar 2006 01:03:12 +0000 (01:03 +0000)]
Make all our flex and bison files use %option prefix or %name-prefix
(respectively) to rename yylex and related symbols. Some were doing
it this way already, while others used not-too-reliable sed hacks in
the Makefiles. It's all nice and consistent now.
Tom Lane [Tue, 7 Mar 2006 01:00:19 +0000 (01:00 +0000)]
Remove the stub support we had for UNION JOIN; per discussion, this is
not likely ever to be implemented seeing it's been removed from SQL2003.
This allows getting rid of the 'filter' version of yylex() that we had in
parser.c, which should save at least a few microseconds in parsing.
Bruce Momjian [Mon, 6 Mar 2006 22:49:17 +0000 (22:49 +0000)]
Attached is the new patch. To summarize:
- new function justify_interval(interval)
- modified function justify_hours(interval)
- modified function justify_days(interval)
These functions are defined to meet the requirements as discussed in
this thread. Specifically:
- justify_hours makes certain the sign bit on the hours
matches the sign bit on the days. It only checks the
sign bit on the days, and not the months, when
determining if the hours should be positive or negative.
After the call, -24 < hours < 24.
- justify_days makes certain the sign bit on the days
matches the sign bit on the months. It's behavior does
not depend on the hours, nor does it modify the hours.
After the call, -30 < days < 30.
- justify_interval makes sure the sign bits on all three
fields months, days, and hours are all the same. After
the call, -24 < hours < 24 AND -30 < days < 30.
Bruce Momjian [Mon, 6 Mar 2006 17:59:30 +0000 (17:59 +0000)]
* Stephen Frost (sfrost@snowman.net) wrote:
> I've now tested this patch at home w/ 8.2HEAD and it seems to fix the
> bug. I plan on testing it under 8.1.2 at work tommorow with
> mod_auth_krb5, etc, and expect it'll work there. Assuming all goes
> well and unless someone objects I'll forward the patch to -patches.
> It'd be great to have this fixed as it'll allow us to use Kerberos to
> authenticate to phppgadmin and other web-based tools which use
> Postgres.
While playing with this patch under 8.1.2 at home I discovered a
mistake in how I manually applied one of the hunks to fe-auth.c.
Basically, the base code had changed and so the patch needed to be
modified slightly. This is because the code no longer either has a
freeable pointer under 'name' or has 'name' as NULL.
The attached patch correctly frees the string from pg_krb5_authname
(where it had been strdup'd) if and only if pg_krb5_authname returned
a string (as opposed to falling through and having name be set using
name = pw->name;). Also added a comment to this effect.
Bruce Momjian [Mon, 6 Mar 2006 17:41:44 +0000 (17:41 +0000)]
This patch adds native LDAP auth, for those platforms that don't have
PAM (such as Win32, but also unixen without PAM). On Unix, uses
OpenLDAP. On win32, uses the builin WinLDAP library.
Bruce Momjian [Mon, 6 Mar 2006 17:10:31 +0000 (17:10 +0000)]
Add:
> o Prevent parent tables from altering or dropping constraints
> like CHECK that are inherited by child tables
>
> Dropping constraints should only be possible with CASCADE.
>
Bruce Momjian [Mon, 6 Mar 2006 05:22:31 +0000 (05:22 +0000)]
Update:
< * %Disallow changing sequence characteristics like INCREMENT for SERIAL columns
> * %Disallow ALTER SEQUENCE changes for SERIAL sequences because pg_dump
> does not dump the changes
Bruce Momjian [Mon, 6 Mar 2006 04:53:50 +0000 (04:53 +0000)]
in the docs, the function "ascii(text)" is described as
returning "ASCII code of the first character of the argument"
(see
http://www.postgresql.org/docs/8.1/interactive/functions-string.html,
Table 9-6. "Other String Functions").
Presumably this should read "ASCII code of the first byte of the
argument",
which is what is returned when the argument is a multi-byte character
(although then with UTF-8 at least that might not necessarily be an
ASCII
code).
Bruce Momjian [Mon, 6 Mar 2006 04:45:21 +0000 (04:45 +0000)]
In psql, save history of backslash commands used in multi-line
statements before the multi-line statement, rather than inside the
multi-line statement.
Neil Conway [Sun, 5 Mar 2006 21:34:34 +0000 (21:34 +0000)]
Per recent discussion on -hackers, we should sometimes reorder the
columns of the grouping clause to avoid redundant sorts. The optimizer
is not currently capable of doing this, so this patch implements a
simple hack in the analysis phase (transformGroupClause): if any
subset of the GROUP BY clause matches a prefix of the ORDER BY list,
that prefix is moved to the front of the GROUP BY clause. This
shouldn't change the semantics of the query, and allows a redundant
sort to be avoided for queries like "GROUP BY a, b ORDER BY b".
Tom Lane [Sat, 4 Mar 2006 19:30:12 +0000 (19:30 +0000)]
Incorporate a couple of recent tuplesort.c improvements into tuplestore.c.
In particular, ensure that enlargement of the memtuples[] array doesn't
fall foul of MaxAllocSize when work_mem is very large, and don't bother
enlarging it if that would force an immediate switch into 'tape' mode anyway.
Tom Lane [Sat, 4 Mar 2006 19:05:06 +0000 (19:05 +0000)]
Prevent sorting from requesting a SortTuple array that exceeds MaxAllocSize;
we'll go over to disk-based sort if we reach that limit.
This fixes Stefan Kaltenbrunner's observation that sorting can suffer an
'invalid memory alloc request size' failure when sort_mem is set large
enough. It's unfortunately not so easy to fix in 8.1 ...
Tatsuo Ishii [Sat, 4 Mar 2006 10:57:35 +0000 (10:57 +0000)]
Tighten up SJIS byte sequence check. Now we reject invalid SJIS byte
sequence such as "0x95 0x27". Patches from Akio Ishida.
Also update copyright notice.
Bruce Momjian [Sat, 4 Mar 2006 04:44:07 +0000 (04:44 +0000)]
> gettimeofday.c:35: warning: integer constant is too large for "long"
> type
Wouldn't it be better to use the UINT64CONST macro? I realize this
file is Windows-only, but we do worry about more than one compiler
on that platform.
Bruce Momjian [Sat, 4 Mar 2006 03:47:29 +0000 (03:47 +0000)]
That was a typo in my comment before the code (the nutshell
descriptions after the code are correct). Only shmmax needs to be
multiples of the page size (at least, that's how I interpret the
Darwin code).
Tom Lane [Fri, 3 Mar 2006 23:38:30 +0000 (23:38 +0000)]
Improve pg_dump and psql to use libpq's newer COPY support routines,
instead of the old deprecated ones.
Volkan Yazici, with some editorializing by moi.
Tom Lane [Fri, 3 Mar 2006 20:57:32 +0000 (20:57 +0000)]
Teach PQcmdTuples() that a COPY command tag might contain a row count,
and tighten up its sanity checking of the tag as a safety measure.
Volkan Yazici.
Tom Lane [Fri, 3 Mar 2006 19:54:10 +0000 (19:54 +0000)]
Make the COPY command return a command tag that includes the number of
rows copied. Backend side of Volkan Yazici's recent patch, with
corrections and documentation.
Tom Lane [Fri, 3 Mar 2006 18:25:14 +0000 (18:25 +0000)]
Dept. of second thoughts: rejigger the TRUNCATE ... CASCADE patch so that
relations are still checked for permissions etc as soon as they are
opened. The original form of the patch could hold exclusive lock for a
long time on relations that the user doesn't even have permissions to
access, let alone truncate.
Tom Lane [Fri, 3 Mar 2006 00:02:02 +0000 (00:02 +0000)]
Arrange to call AbsorbFsyncRequests every so often while performing a
checkpoint in the bgwriter. This forestalls overflow of the fsync request
queue, which is not fatal but causes considerable performance degradation
when it occurs (because backends then have to do their own fsyncs). Per
patch from Itagaki Takahiro, modified a little bit by me.
Tom Lane [Thu, 2 Mar 2006 21:56:14 +0000 (21:56 +0000)]
Remove unnecessary lo_lseek call in lo_open. Apparently there was once
a need for it back in the neolithic era, but it's certainly dead code in
any PG release we would recognize as such. Since it forces an additional
network round trip to the backend, getting rid of it should provide some
small performance improvement for large-object-using clients.
Tom Lane [Thu, 2 Mar 2006 21:49:09 +0000 (21:49 +0000)]
Fix ancient error in large objects usage example: overwrite() subroutine
was opening with INV_READ flag and then writing. Prior to 8.1 the backend
did not reject this, but now it does.