Tom Lane [Tue, 15 May 2018 19:06:53 +0000 (15:06 -0400)]
Fix type checking for support functions of parallel VARIADIC aggregates.
The impact of VARIADIC on the combine/serialize/deserialize support
functions of an aggregate wasn't thought through carefully. There is
actually no impact, because variadicity isn't passed through to these
functions (and it doesn't seem like it would need to be). However,
lookup_agg_function was mistakenly told to check things as though it were
passed through. The net result was that it was impossible to declare an
aggregate that had both VARIADIC input and parallelism support functions.
In passing, fix a runtime check in nodeAgg.c for the combine function's
strictness to make its error message agree with the creation-time check.
The previous message was actually backwards, and it doesn't seem like
there's a good reason to have two versions of this message text anyway.
Back-patch to 9.6 where parallel aggregation was introduced.
Alvaro Herrera [Mon, 14 May 2018 17:09:32 +0000 (13:09 -0400)]
Don't allow partitioned index on foreign-table partitions
Creating indexes on foreign tables is already forbidden, but local
partitioned indexes (commit 8b08f7d4820f) forgot to check for them. Add
a preliminary check to prevent wasting time.
Another school of thought says to allow the index to be created if it's
not a unique index; but it's possible to do better in the future (enable
indexing of foreign tables, somehow), so we avoid painting ourselves in
a corner by rejecting all cases, to avoid future grief (a.k.a. backward
incompatible changes).
Reported-by: Arseny Sher
Author: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/87sh71cakz.fsf@ars-thinkpad
Alvaro Herrera [Sat, 12 May 2018 15:08:17 +0000 (12:08 -0300)]
docs: Rework sections on partition pruning/exclusion
Explain partition pruning more thoroughly, in a section above the one
that explains constraint exclusion, since the new feature is the one
that will be used more extensively from now on. Move some of the
material from the constraint exclusion subsection to the one on
partition pruning, so that we can explain the legacy method by
explaining the differences with the new one instead of repeating it.
Author: David Rowley, Álvaro Herrera Reviewed-by: Amit Langote, David G. Johnston, Justin Pryzby
Discussion: https://postgr.es/m/CAKJS1f8PECxEi1YQ9nhVtshtfOMHUzAMm_Zp4gGCOCnMPjEKJA@mail.gmail.com
Teodor Sigaev [Thu, 10 May 2018 10:31:47 +0000 (13:31 +0300)]
Various improvements of skipping index scan during vacuum technics
- Change vacuum_cleanup_index_scale_factor GUC to PGC_USERSET.
vacuum_cleanup_index_scale_factor GUC was defined as PGC_SIGHUP. But this
GUC affects not only autovacuum. So it might be useful to change it from user
session in order to influence manually runned VACUUM.
- Add missing tab-complete support for vacuum_cleanup_index_scale_factor
reloption.
- Fix condition for B-tree index cleanup.
Zero value of vacuum_cleanup_index_scale_factor means that user wants B-tree
index cleanup to be never skipped.
- Documentation and comment improvements
Authors: Justin Pryzby, Alexander Korotkov, Liudmila Mantrova
Reviewed by: all authors and Robert Haas
Discussion: https://www.postgresql.org/message-id/flat/20180502023025.GD7631%40telsasoft.com
Tom Lane [Wed, 9 May 2018 17:55:27 +0000 (13:55 -0400)]
Update time zone data files to tzdata release 2018e.
DST law changes in North Korea. Redefinition of "daylight savings" in
Ireland, as well as for some past years in Namibia and Czechoslovakia.
Additional historical corrections for Czechoslovakia.
With this change, the IANA database models Irish timekeeping as following
"standard time" in summer, and "daylight savings" in winter, so that the
daylight savings offset is one hour behind standard time not one hour
ahead. This does not change their UTC offset (+1:00 in summer, 0:00 in
winter) nor their timezone abbreviations (IST in summer, GMT in winter),
though now "IST" is more correctly read as "Irish Standard Time" not "Irish
Summer Time". However, the "is_dst" column in the pg_timezone_names view
will now be true in winter and false in summer for the Europe/Dublin zone.
Similar changes were made for Namibia between 1994 and 2017, and for
Czechoslovakia between 1946 and 1947.
So far as I can find, no Postgres internal logic cares about which way
tm_isdst is reported; in particular, since commit b2cbced9e we do not
rely on it to decide how to interpret ambiguous timestamps during DST
transitions. So I don't think this change will affect any Postgres
behavior other than the timezone-view outputs.
Commit 8b08f7d4820f failed to update these modules to at least give
non-broken error messages for partitioned indexes. Add appropriate
error support to them.
Peter G. was complaining about a problem of unfriendly error messages;
while we haven't fixed that yet, subsequent discussion let to discovery
of these unhandled cases.
Author: Michaël Paquier Reported-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-WzkOKptQiE51Bh4_xeEHhaBwHkZkGtKizrFMgEkfUuRRQg@mail.gmail.com
Alvaro Herrera [Wed, 9 May 2018 16:44:50 +0000 (13:44 -0300)]
pgstatindex: HASH -> hash
Fix the lone error message in the whole source tree to use capitalized
HASH when referring to hash indexes, making it look like all the other
messages.
Someday it would be good to standardize 'B-Tree', 'B-tree', 'btree', and
random other spellings, too, but that's a larger patch ...
Alvaro Herrera [Wed, 9 May 2018 13:51:23 +0000 (10:51 -0300)]
Fix assorted partition pruning bugs
match_clause_to_partition_key failed to consider COERCION_PATH_ARRAYCOERCE
cases in scalar-op-array expressions, so it was possible to crash the
server easily. To handle this case properly (ie. prune partitions) we
would need to run a bit of executor code during planning. Maybe it can
be improved, but for now let's just not crash. Add a test case that
used to trigger the crash.
Author: Michaël Paquier
match_clause_to_partition_key failed to indicate that operators that
don't have a commutator in a btree opclass are unsupported. It is
possible for this to cause a crash later if such an operator is used in
a scalar-op-array expression. Add a test case that used to the crash.
Author: Amit Langote
One caller of gen_partprune_steps_internal in
match_clause_to_partition_key was too optimistic about the former never
returning an empty step list. Rid it of its innocence. (Having fixed
the bug above, I no longer know how to exploit this, so no test case for
it, but it remained a bug.) Revise code flow a little bit, for
succintness.
Author: Álvaro Herrera
Andrew Dunstan [Wed, 9 May 2018 14:14:46 +0000 (10:14 -0400)]
Restrict vertical tightness to parentheses in Perl code
The vertical tightness settings collapse vertical whitespace between
opening and closing brackets (parentheses, square brakets and braces).
This can make data structures in particular harder to read, and is not
very consistent with our style in non-Perl code. This patch restricts
that setting to parentheses only, and reformats all the perl code
accordingly. Not applying this to parentheses has some unfortunate
effects, so the consensus is to keep the setting for parentheses and not
for the others.
The diff for this patch does highlight some places where structures
should have trailing commas. They can be added manually, as there is no
automatic tool to do so.
Alvaro Herrera [Wed, 9 May 2018 13:40:21 +0000 (10:40 -0300)]
Make gen_partprune_steps static
There's no need to export this function, so don't. Michaël didn't
actually write the patch, but we list him as first author because with a
trivial one like this, intellectual authorship is as important (if not
more) as bit shovelling.
Author: Michaël Paquier, Amit Langote
Discussion: https://postgr.es/m/c91299c4-199b-0f16-339b-a29d6d2a39ee@lab.ntt.co.jp
Andrew Dunstan [Wed, 9 May 2018 11:55:23 +0000 (07:55 -0400)]
Add a script and a config file to run perlcritic
This is similar to what we do to run perltidy. For now we only run at
severity level 5. Over time we can improve our perl code and reduce the
severity level.
Teodor Sigaev [Wed, 9 May 2018 10:23:16 +0000 (13:23 +0300)]
Improve jsonb cast error message
Initial variant of error message didn't follow style of another casting error
messages and wasn't informative. Per gripe from Robert Haas.
Reviewer: Tom Lane
Discussion: https://www.postgresql.org/message-id/flat/CA%2BTgmob08StTV9yu04D0idRFNMh%2BUoyKax5Otvrix7rEZC8rMw%40mail.gmail.com#CA+Tgmob08StTV9yu04D0idRFNMh+UoyKax5Otvrix7rEZC8rMw@mail.gmail.com
Tom Lane [Wed, 9 May 2018 00:17:43 +0000 (20:17 -0400)]
Improve inefficient regexes in vacuumdb TAP test.
The regexes used in 102_vacuumdb_stages.pl to check the postmaster log
for expected output contained several places with ".*.*", which is
underdetermined and can cause exponential runtime growth in Perl's regex
matcher (since it's not bright enough not to waste time seeing whether
different splits of the same substring would allow a match). We were
fortunate that the amount of text in the postmaster log was generally not
enough to make the runtime go to the moon; although commit 6271fceb8 had
been on the hairy edge of an obvious problem, thanks to its increasing the
default log verbosity to DEBUG1. Experimentation shows that anyone who
tried to run this test case with an even higher log verbosity would have
been in for serious pain. But even at default logging level, fixing this
saves several hundred ms on my workstation, more on slower buildfarm
members.
Remove the extra ".*"s, restoring more-or-less-linear matching speed.
Back-patch to 9.4 where the test case was added, mostly in case anyone
tries to do related debugging in a back branch.
Tom Lane [Tue, 8 May 2018 19:59:01 +0000 (15:59 -0400)]
Improve initdb's query for generating default descriptions a little.
While poking into initdb's performance, I noticed that this query
wasn't being done very intelligently. By forcing it to execute
obj_description() for each pg_proc/pg_operator join row, we were
essentially setting up a nestloop join to pg_description, which
is not a bright query plan when there are hundreds of outer rows.
Convert the check for a "deprecated" operator into a NOT EXISTS
so that it can be done as a hashed antijoin. On my workstation
this reduces the time for this query from ~ 35ms to ~ 10ms.
Which is not a huge win, but it adds up over buildfarm runs.
In passing, insert forced query breaks (\n\n, in single-user mode)
after each SQL-query file that initdb sources, and after some
relatively new queries in setup_privileges(). This doesn't make
a lot of difference normally, but it will result in briefer, saner
error messages if anything goes wrong.
Tom Lane [Tue, 8 May 2018 04:20:19 +0000 (00:20 -0400)]
Count heap tuples in non-SnapshotAny path in IndexBuildHeapRangeScan().
Brown-paper-bag bug in commit 7c91a0364: when we rearranged the placement
of "reltuples += 1" statements, we missed including one in this code path.
The net effect of that was that CREATE INDEX CONCURRENTLY would set the
table's pg_class.reltuples to zero, as would index builds done during
bootstrap mode. (It seems like parallel index builds ought to fail
similarly, but they don't, perhaps because reltuples is computed in some
other way. You certainly couldn't figure that out from the abysmally
underdocumented parallelism code in this area.)
I was led to this by wondering why initdb seemed to have slowed down as
a result of 7c91a0364, as is evident in the buildfarm's timing history.
The reason is that every system catalog with indexes had pg_class.reltuples
= 0 after bootstrap, causing the planner to make some terrible choices for
queries in the post-bootstrap steps. On my workstation, this fix causes
the runtime of "initdb -N" to drop from ~2.0 sec to ~1.4 sec, which is
almost though not quite back to where it was in v10. That's not much of
a deal for production use perhaps, but it makes a noticeable difference
for buildfarm and "make check-world" runs, which do a lot of initdbs.
Andrew Dunstan [Mon, 7 May 2018 19:21:00 +0000 (15:21 -0400)]
Clean up some perlcritic warnings
In Catalog.pm, mark eval of a string instead of a block as allowed.
Disallow perlcritic completely in Gen_dummy_probes.pl, as it's
generated code.
Protect a couple of lines in plperl code from perltidy, so that the
annotation for perlcritic stays on the same line as the construct it
would otherwise object to.
Tom Lane [Mon, 7 May 2018 19:12:01 +0000 (15:12 -0400)]
Undo extra chattiness of postmaster logs in TAP tests.
Commit 6271fceb8 changed PostgresNode.pm to force log_min_messages = debug1
in all TAP tests, without any discussion and without a concrete need for
it. This makes some of the TAP tests noticeably slower (although much of
that may be due to poorly-written regexes), and for certain it's bloating
the buildfarm logs. Revert the change.
Tom Lane [Mon, 7 May 2018 18:32:04 +0000 (14:32 -0400)]
Update oidjoins regression test for v11.
Commit 86f575948 already manually updated the oidjoins test for the
new pg_constraint.conparentid => pg_constraint.oid relationship, but
failed to update findoidjoins/README, thus the apparent inconsistency
here.
Tom Lane [Mon, 7 May 2018 17:44:09 +0000 (13:44 -0400)]
Suppress compiler warnings when building with --enable-dtrace.
Most versions of "dtrace -h" drop const qualifiers from the declarations
of probe functions (though macOS gets it right). This causes compiler
warnings when we pass in pointers to const. Repair by extending our
existing post-processing of the probes.h file. To do so, assume that all
"char *" arguments should be "const char *"; that seems reasonably safe.
Tom Lane [Mon, 7 May 2018 17:13:27 +0000 (13:13 -0400)]
Last-minute updates for release notes.
The set of functions that need parallel-safety adjustments isn't the
same in 9.6 as 10, so I shouldn't have blindly back-patched that list.
Adjust as needed. Also, provide examples of the commands to issue.
There shouldn't be a line break between two adjacent tags, because that
will appear as whitespace in the output. (The rendering engine might in
turn collapse that whitespace away, so it might not actually make a
difference, but it's more correct this way.)
Stephen Frost [Mon, 7 May 2018 14:10:33 +0000 (10:10 -0400)]
adminpack: Revoke EXECUTE on pg_logfile_rotate()
In 9.6, we moved a number of functions over to using the GRANT system to
control access instead of having hard-coded superuser checks.
As it turns out, adminpack was creating another function in the catalog
for one of those backend functions where the superuser check was
removed, specifically pg_rotate_logfile(), but it didn't get the memo
about having to REVOKE EXECUTE on the alternative-name function
(pg_logfile_rotate()), meaning that in any installations with adminpack
on 9.6 and higher, any user is able to run the pg_logfile_rotate()
function, which then calls pg_rotate_logfile() and rotates the logfile.
Fix by adding a new version of adminpack (1.1) which handles the REVOKE.
As this function should have only been available to the superuser, this
is a security issue, albeit a minor one.
In HEAD, move the changes implemented for adminpack up to be adminpack
2.0 instead of 1.1.
Tom Lane [Sat, 5 May 2018 20:23:07 +0000 (16:23 -0400)]
Fix bootstrap parser so that its keywords are unreserved words.
Mark Dilger pointed out that the bootstrap parser does not allow
any of its keywords to appear as column values unless they're quoted,
and proposed dealing with that by quoting such values in genbki.pl.
Looking closer, though, we also have that problem with respect to table,
column, and type names appearing in the .bki file: the parser would fail
if any of those matched any of its keywords. While so far there have
been no conflicts (that I've heard of), this seems like a booby trap
waiting to catch somebody. Rather than clutter genbki.pl with enough
quoting logic to handle all that, let's make the bootstrap parser grow
up a little bit and treat its keywords as unreserved.
Experimentation shows that it's fairly easy to do so with the exception
of _null_, which I don't have a big problem with keeping as a reserved
word. The only change needed is that we can't have the "close" command
take an optional table name: it has to either require or forbid the
table name to avoid shift/reduce conflicts. genbki.pl has historically
always included the table name, so I took that option.
The implementation has bootscanner.l passing forward the string value
of each keyword, in case bootparse.y needs that. This avoids needing to
know the precise spelling of each keyword in bootparse.y, which is good
because that's not always obvious from the token name.
Tom Lane [Sat, 5 May 2018 17:22:11 +0000 (13:22 -0400)]
Revert "Test conversion of NaN between float4 and float8."
This reverts commit 55e0e458170c76c1a0074cd550a13ec47e38a3fa.
It's served its purpose of demonstrating what was wrong on
buildfarm member opossum. We could consider putting some kind
of single-purpose hack into ftod() to make the test pass there;
but I don't think it's worth the trouble, since there are surely
many other places whether this platform bug could manifest.
Tom Lane [Sat, 5 May 2018 17:21:50 +0000 (13:21 -0400)]
Put in_range_float4_float8's work in-line.
In commit 8b29e88cd, I'd dithered about whether to make
in_range_float4_float8 be a standalone copy of the float in-range logic
or have it punt to in_range_float8_float8. I went with the latter, which
saves code space though at the cost of performance and readability.
However, it emerges that this tickles a compiler or hardware bug on
buildfarm member opossum. Test results from commit 55e0e4581 show
conclusively that widening a float4 NaN to float8 produces Inf, not NaN,
on that machine; which accounts perfectly for the window RANGE test
failures it's been showing. We can dodge this problem by making
in_range_float4_float8 be an independent function, so that it checks
for NaN inputs before widening them.
Ordinarily I'd not be very excited about working around such obviously
broken functionality; but given that this was a judgment call to begin
with, I don't mind reversing it.
Fix scenario where streaming standby gets stuck at a continuation record.
If a continuation record is split so that its first half has already been
removed from the master, and is only present in pg_wal, and there is a
recycled WAL segment in the standby server that looks like it would
contain the second half, recovery would get stuck. The code in
XLogPageRead() incorrectly started streaming at the beginning of the
WAL record, even if we had already read the first page.
Backpatch to 9.4. In principle, older versions have the same problem, but
without replication slots, there was no straightforward mechanism to
prevent the master from recycling old WAL that was still needed by standby.
Without such a mechanism, I think it's reasonable to assume that there's
enough slack in how many old segments are kept around to not run into this,
or you have a WAL archive.
Reported by Jonathon Nelson. Analysis and patch by Kyotaro HORIGUCHI, with
some extra comments by me.
Alvaro Herrera [Fri, 4 May 2018 18:24:44 +0000 (15:24 -0300)]
Don't mark pages all-visible spuriously
Dan Wood diagnosed a long-standing problem that pages containing tuples
that are locked by multixacts containing live lockers may spuriously end
up as candidates for getting their all-visible flag set. This has the
long-term effect that multixacts remain unfrozen; this may previously
pass undetected, but since commit XYZ it would be reported as
"ERROR: found multixact 134100944 from before relminmxid 192042633"
because when a later vacuum tries to freeze the page it detects that a
multixact that should have gotten frozen, wasn't.
Dan proposed a (correct) patch that simply sets a variable to its
correct value, after a bogus initialization. But, per discussion, it
seems better coding to avoid the bogus initializations altogether, since
they could give rise to more bugs later. Therefore this fix rewrites
the logic a little bit to avoid depending on the bogus initializations.
This bug was part of a family introduced in 9.6 by commit a892234f830e;
later, commit 38e9f90a227d fixed most of them, but this one was
unnoticed.
Andrew Dunstan [Fri, 4 May 2018 19:22:48 +0000 (15:22 -0400)]
Provide for testing on python3 modules when under MSVC
This should have been done some years ago as promised in commit c4dcdd0c2. However, better late than never.
Along the way do a little housekeeping, including using a simpler test
for the python version being tested, and removing a redundant subroutine
parameter. These changes only apply back to release 9.5.
Tom Lane [Fri, 4 May 2018 16:26:25 +0000 (12:26 -0400)]
Sync our copy of the timezone library with IANA release tzcode2018e.
The non-cosmetic changes involve teaching the "zic" tzdata compiler about
negative DST. While I'm not currently intending that we start using
negative-DST data right away, it seems possible that somebody would try
to use our copy of zic with bleeding-edge IANA data. So we'd better be
out in front of this change code-wise, even though it doesn't matter for
the data file we're shipping.
Peter Eisentraut [Tue, 10 Apr 2018 16:32:05 +0000 (12:32 -0400)]
pg_dump: Use current_database() instead of PQdb()
For querying pg_database about information about the database being
dumped, look up by using current_database() instead of the value
obtained from PQdb(). When using a connection proxy, the value from
PQdb() might not be the real name of the database.
Teodor Sigaev [Fri, 4 May 2018 09:38:23 +0000 (12:38 +0300)]
Don't truncate away non-key attributes for leftmost downlinks.
nbtsort.c does not need to truncate away non-key attributes for the
minimum key of the leftmost page on a level, since this is only used to
build a minus infinity downlink for the level's leftmost page.
Truncating away non-key attributes in advance of truncating away all
attributes in _bt_sortaddtup() does not affect the correctness of CREATE
INDEX, but it is misleading.
Author: Peter Geoghegan
Discussion: https://www.postgresql.org/message-id/CAH2-WzkAS2M3ussHG-s_Av=Zo6dPjOxyu5fNRkYnxQV+YzGQ4w@mail.gmail.com
Teodor Sigaev [Fri, 4 May 2018 08:27:50 +0000 (11:27 +0300)]
Re-think predicate locking on GIN indexes.
The principle behind the locking was not very well thought-out, and not
documented. Add a section in the README to explain how it's supposed to
work, and change the code so that it actually works that way.
This fixes two bugs:
1. If fast update was turned on concurrently, subsequent inserts to the
pending list would not conflict with predicate locks that were acquired
earlier, on entry pages. The included 'predicate-gin-fastupdate' test
demonstrates that. To fix, make all scans acquire a predicate lock on
the metapage. That lock represents a scan of the pending list, whether
or not there is a pending list at the moment. Forget about the
optimization to skip locking/checking for locks, when fastupdate=off.
2. If a scan finds no match, it still needs to lock the entry page. The
point of predicate locks is to lock the gabs between values, whether
or not there is a match. The included 'predicate-gin-nomatch' test
tests that case.
In addition to those two bug fixes, this removes some unnecessary locking,
following the principle laid out in the README. Because all items in
a posting tree have the same key value, a lock on the posting tree root is
enough to cover all the items. (With a very large posting tree, it would
possibly be better to lock the posting tree leaf pages instead, so that a
"skip scan" with a query like "A & B", you could avoid unnecessary conflict
if a new tuple is inserted with A but !B. But let's keep this simple.)
Also, some spelling fixes.
Author: Heikki Linnakangas with some editorization by me
Review: Andrey Borodin, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/0b3ad2c2-2692-62a9-3a04-5724f2af9114@iki.fi
Tom Lane [Thu, 3 May 2018 22:06:45 +0000 (18:06 -0400)]
Avoid overwriting unchanged output files in genbki.pl and Gen_fmgrtab.pl.
If a particular output file already exists with the contents it should
have, leave it alone, so that its mod timestamp is not advanced.
In builds using --enable-depend, this can avoid the need to recompile .c
files whose included files didn't actually change. It's not clear whether
it saves much of anything for users of ccache; but the cost of doing the
file comparisons seems to be negligible, so we might as well do it.
For developers using the MSVC toolchain, this will create a regression:
msvc/Solution.pm will sometimes run genbki.pl or Gen_fmgrtab.pl
unnecessarily. I'll look into fixing that separately.
Tom Lane [Thu, 3 May 2018 21:54:18 +0000 (17:54 -0400)]
Rearrange makefile rules for running Gen_fmgrtab.pl.
Make these rules look more like the ones associated with genbki.pl,
to wit:
* Use a stamp file to record when we last ran the script, instead of
relying on the timestamps of the individual output files.
* Take the knowledge out of backend/Makefile and put it in utils/Makefile
where it belongs. I moved down the handling of errcodes.h and probes.h
too, although those continue to be built by separate processes.
In itself, this is just much-needed cleanup with little practical effect.
However, by decoupling these makefile rules from the timestamps of the
generated header files, we open the door to not advancing those timestamps
unnecessarily, which will be taken advantage of by the next commit.
msvc/Solution.pm should be taught to do things similarly, but I'll leave
that for another commit.
Peter Eisentraut [Tue, 13 Feb 2018 21:13:20 +0000 (16:13 -0500)]
Tweak tests to support Python 3.7
Python 3.7 removes the trailing comma in the repr() of
BaseException (see <https://bugs.python.org/issue30399>), leading to
test output differences. Work around that by composing the equivalent
test output in a more manual way.
Teodor Sigaev [Thu, 3 May 2018 17:08:29 +0000 (20:08 +0300)]
Add HOLD_INTERRUPTS section into FinishPreparedTransaction.
If an interrupt arrives in the middle of FinishPreparedTransaction
and any callback decide to call CHECK_FOR_INTERRUPTS (e.g.
RemoveTwoPhaseFile can write a warning with ereport, which checks for
interrupts) then it's possible to leave current GXact undeleted.
Tom Lane [Thu, 3 May 2018 16:50:27 +0000 (12:50 -0400)]
Avoid portability issues in autoprewarm.c.
autoprewarm.c mostly considered the number of blocks it might be dealing
with as being int64. This is unnecessary, because NBuffers is declared
as int, and there's been no suggestion that we might widen it in the
foreseeable future. Moreover, using int64 is problematic because the
code expected INT64_FORMAT to work with fscanf(), something we don't
guarantee, and which indeed fails on some older buildfarm members.
On top of that, the module randomly used uint32 rather than int64 variables
to hold block counters in several places, so it would fail anyway if we
ever did have NBuffers wider than that; and it also supposed that pg_qsort
could sort an int64 number of elements, which is wrong on 32-bit machines
(though no doubt a 32-bit machine couldn't actually have that many
buffers).
Hence, change all these variables to plain int.
In passing, avoid shadowing one variable named i with another,
and avoid casting away const in apw_compare_blockinfo.
Tom Lane [Thu, 3 May 2018 15:32:57 +0000 (11:32 -0400)]
Further improve code for probing the availability of ARM CRC instructions.
Andrew Gierth pointed out that commit 1c72ec6f4 would yield the wrong
answer on big-endian ARM systems, because the data being CRC'd would be
different. To fix that, and avoid the rather unsightly hard-wired
constant, simply compare the hardware and software implementations'
results.
While we're at it, also log the resulting decision at DEBUG1, and error
out if the hw and sw results unexpectedly differ. Also, since this
file must compile for both frontend and backend, avoid incorrect
dependencies on backend-only headers.
In passing, add a comment to postmaster.c about when the CRC function
pointer will get initialized.
Thomas Munro, based on complaints from Andrew Gierth and Tom Lane
Since the SPI stack has been moved from TopTransactionContext to
TopMemoryContext, setting _SPI_stack to NULL in AtEOXact_SPI() leaks
memory. In fact, we don't need to do that anymore: We just leave the
allocated stack around for the next SPI use.
Also, refactor the SPI cleanup so that it is run both at transaction end
and when returning to the main loop on an exception. The latter is
necessary when a procedure calls a COMMIT or ROLLBACK command that
itself causes an error.
Tests for this had been removed in 6278a2a262b63faaf47eb2371f6bcb5b6e3ff118, but in case they are ever
resurrected: This would change the output of the test1nan() function to
an error.
Tom Lane [Wed, 2 May 2018 20:00:54 +0000 (16:00 -0400)]
Suppress some compiler warnings in plperl on Windows.
Perl's XSUB.h header defines macros to replace libc functions. Our header
port_win32.h does something similar earlier, so XSUB.h causes compiler
warnings about macro redefinition. Undefine our macros before including
XSUB.h.
Tom Lane [Wed, 2 May 2018 19:52:54 +0000 (15:52 -0400)]
Fix assorted compiler warnings seen in the buildfarm.
Failure to use DatumGetFoo/FooGetDatum macros correctly, or at all,
causes some warnings about sign conversion. This is just cosmetic
at the moment but in principle it's a type violation, so clean up
the instances I could find.
autoprewarm.c and sharedfileset.c contained code that unportably
assumed that pid_t is the same size as int. We've variously dealt
with this by casting pid_t to int or to unsigned long for printing
purposes; I went with the latter.
Fix uninitialized-variable warning in RestoreGUCState. This is
a live bug in some sense, but of no great significance given that
nobody is very likely to care what "line number" is associated with
a GUC that hasn't got a source file recorded.
Tom Lane [Wed, 2 May 2018 16:22:48 +0000 (12:22 -0400)]
Fix bogus code for extracting extended-statistics data from syscache.
statext_dependencies_load and statext_ndistinct_load were not up to snuff,
in addition to being randomly different from each other. In detail:
* Deserialize the fetched bytea value before releasing the syscache
entry, not after. This mistake causes visible regression test failures
when running with -DCATCACHE_FORCE_RELEASE. Since it's not exposed by
-DCLOBBER_CACHE_ALWAYS, I think there may be no production hazard here
at present, but it's at least a latent bug.
* Use DatumGetByteaPP not DatumGetByteaP to save a detoasting cycle
for short stats values; the deserialize function has to be, and is,
prepared for short-header values since its other caller uses PP.
* Use a test-and-elog for null stats values in both functions, rather
than a test-and-elog in one case and an Assert in the other. Perhaps
Asserts would be sufficient in both cases, but I don't see a good
argument for them being different.
* Minor cosmetic changes to make these functions more visibly alike.
Fix some sloppiness in the new BufFileSize() and BufFileAppend() functions.
There were three related issues:
* BufFileAppend() incorrectly reset the seek position on the 'source' file.
As a result, if you had called BufFileRead() on the file before calling
BufFileAppend(), it got confused, and subsequent calls would read/write
at wrong position.
* BufFileSize() did not work with files opened with BufFileOpenShared().
* FileGetSize() only worked on temporary files.
To fix, change the way BufFileSize() works so that it works on shared
files. Remove FileGetSize() altogether, as it's no longer needed. Remove
buffilesize from TapeShare struct, as the leader process can simply call
BufFileSize() to get the tape's size, there's no need to pass it through
shared memory anymore.
Tom Lane [Wed, 2 May 2018 04:21:21 +0000 (00:21 -0400)]
Change SIZEOF_BOOL to 1 for Windows.
For some reason it was previously defined as 0, which is silly. The only
effect was to disable use of <stdbool.h>, which commit b2328bf62 intended
to make possible.
Andres Freund [Wed, 2 May 2018 02:53:48 +0000 (19:53 -0700)]
Further -Wimplicit-fallthrough cleanup.
Tom's earlier commit in 41c912cad159 didn't update a few cases that
are only encountered with the non-standard --with-llvm config
flag. Additionally there's also one case that appears to be a
deficiency in gcc's (up to trunk as of a few days ago) detection of
"fallthrough" comments - changing the placement slightly fixes that.
Author: Andres Freund
Discussion: https://postgr.es/m/20180502003239.wfnqu7ekz7j7imm4@alap3.anarazel.de
Tom Lane [Tue, 1 May 2018 23:38:26 +0000 (19:38 -0400)]
Fix some assorted compiler warnings on Windows.
Don't overflow the result type of constant expressions. Don't negate
unsigned types. Define HAVE_STDBOOL_H for Visual C++ 2013 and later.
Thomas Munro Reviewed-By: Michael Paquier and Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D3%3DTDYEXUEcHpEx%2BTwc31wo7PA0oBAiNt6sWmq93MW02A%40mail.gmail.com
Tom Lane [Tue, 1 May 2018 23:35:08 +0000 (19:35 -0400)]
Clean up warnings from -Wimplicit-fallthrough.
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Andres Freund [Tue, 1 May 2018 20:30:12 +0000 (13:30 -0700)]
Improve representation of 'moved partitions' indicator on deleted tuples.
Previously a tuple that has been moved to a different partition (see f16241bef7c), set the block number on the old tuple to an invalid
value to indicate that fact. But the tuple offset was left
untouched. That turned out to trigger a wal_consistency_checking
failure as reported by Peter Geoghegan, as the offset wasn't
always overwritten during WAL replay.
Heikki observed that we're wasting valuable data by not putting
information also in the offset. Thus set that to
MovedPartitionsOffsetNumber when a tuple indicates it has moved.
We continue to set the block number to MovedPartitionsBlockNumber, as
that seems more likely to cause problems for code not updated to know
about moved tuples.
As t_ctid's offset number is now always set, this refinement also
fixes the wal_consistency_checking issue.
This technically is a minor disk format break, with previously created
moved tuples not being recognized anymore. But since there not even
has been a beta release since f16241bef7c...
Reported-By: Peter Geoghegan
Author: Heikki Linnakangas, Amul Sul
Discussion: https://postgr.es/m/CAH2-Wzm9ty+1BX7-GMNJ=xPRg67oJTVeDNdA9LSyJJtMgRiCMA@mail.gmail.com
Robert Haas [Tue, 1 May 2018 17:21:46 +0000 (13:21 -0400)]
Fix interaction of foreign tuple routing with remote triggers.
Without these fixes, changes to the inserted tuple made by remote
triggers are ignored when building local RETURNING tuples.
In the core code, call ExecInitRoutingInfo at a later point from
within ExecInitPartitionInfo so that the FDW callback gets invoked
after the returning list has been built. But move CheckValidResultRel
out of ExecInitRoutingInfo so that it can happen at an earlier stage.
In postgres_fdw, refactor assorted deparsing functions to work with
the RTE rather than the PlannerInfo, which saves us having to
construct a fake PlannerInfo in cases where we don't have a real one.
Then, we can pass down a constructed RTE that yields the correct
deparse result when no real one exists. Unfortunately, this
necessitates a hack that understands how the core code manages RT
indexes for update tuple routing, which is ugly, but we don't have a
better idea right now.
Original report, analysis, and patch by Etsuro Fujita. Heavily
refactored by me. Then worked over some more by Amit Langote.
Tom Lane [Tue, 1 May 2018 17:21:16 +0000 (13:21 -0400)]
Remove jsonb_plperl test cases for Inf/NaN conversions.
It turns out that old Perl versions (before about 5.10) don't have any
very reliable way to generate Inf or NaN numeric values. Getting around
that would require way more work than is really justified to test the
code involved, so let's just drop these new test cases.
Tom Lane [Tue, 1 May 2018 00:09:31 +0000 (20:09 -0400)]
Does it help to wait before reattaching?
Revert the map/unmap dance I tried in commit 73042b8d1; that helps
not at all.
Instead, speculate that the unwanted allocation is being done on
another thread, and thus timing variations explain the apparent
unpredictability. Temporarily add a 1-second sleep before the
VirtualFree call, in hopes that any such other threads will
quiesce and not jog our elbow.
This is obviously not a desirable long-term fix, but as a means of
investigation it seems useful.
Tom Lane [Mon, 30 Apr 2018 21:07:14 +0000 (17:07 -0400)]
Map and unmap the shared memory block before risking VirtualFree.
The idea here is to get Windows' userspace infrastructure to allocate
whatever space it needs for MapViewOfFileEx() before we release the
locked-down space that we want to map the shared memory block into.
This is a fairly brute-force attempt, and would likely (for example)
fail with large shared memory on 32-bit Windows. We could perhaps
ameliorate that by mapping only part of the shared memory block in
this way, but for the moment I just want to see if this approach
will fix dory's problem.
Tom Lane [Mon, 30 Apr 2018 20:19:51 +0000 (16:19 -0400)]
Further effort at preventing memory map dump from affecting the results.
Rather than elog'ing immediately, push the map data into a preallocated
StringInfo. Perhaps this will prevent some of the mid-operation
allocations that are evidently happening now.
Peter Eisentraut [Mon, 30 Apr 2018 17:49:20 +0000 (13:49 -0400)]
Don't do logical replication of TRUNCATE of zero tables
When due to publication configuration, a TRUNCATE change ends up with
zero tables to be published, don't send the message out, just skip it.
It's not wrong, but obviously useless overhead.
Peter Eisentraut [Mon, 30 Apr 2018 16:28:45 +0000 (12:28 -0400)]
Prevent infinity and NaN in jsonb/plperl transform
jsonb uses numeric internally, and numeric can store NaN, but that is
not allowed by jsonb on input, so we shouldn't store it. Also prevent
infinity to get a consistent error message. (numeric input would reject
infinity anyway.)
Reported-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org> Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
projects / postgresql / log