Per discussion, it's not desirable to add valgrind suppressions for
outside our own code base (e.g. glibc in this case), especially when
the suppressions may be platform-specific. There are better ways to
deal with that, e.g. by providing local suppressions.
Tom Lane [Fri, 18 Jan 2019 20:06:26 +0000 (15:06 -0500)]
Use our own getopt() on OpenBSD.
Recent OpenBSD (at least 5.9 and up) has a version of getopt(3)
that will not cope with the "-:" spec we use to accept double-dash
options in postgres.c and postmaster.c. Admittedly, that's a hack
because POSIX only requires getopt() to allow alphanumeric option
characters. I have no desire to find another way, however, so
let's just do what we were already doing on Solaris: force use
of our own src/port/getopt.c implementation.
In passing, improve some of the comments around said implementation.
Per buildfarm and local testing. Back-patch to all supported branches.
Andrew Gierth [Thu, 17 Jan 2019 05:33:01 +0000 (05:33 +0000)]
Postpone aggregate checks until after collation is assigned.
Previously, parseCheckAggregates was run before
assign_query_collations, but this causes problems if any expression
has already had a collation assigned by some transform function (e.g.
transformCaseExpr) before parseCheckAggregates runs. The differing
collations would cause expressions not to be recognized as equal to
the ones in the GROUP BY clause, leading to spurious errors about
unaggregated column references.
The result was that CASE expr WHEN val ... would fail when "expr"
contained a GROUPING() expression or matched one of the group by
expressions, and where collatable types were involved; whereas the
supposedly identical CASE WHEN expr = val ... would succeed.
Backpatch all the way; this appears to have been wrong ever since
collations were introduced.
Per report from Guillaume Lelarge, analysis and patch by me.
Tom Lane [Fri, 11 Jan 2019 20:53:34 +0000 (15:53 -0500)]
Avoid sharing PARAM_EXEC slots between different levels of NestLoop.
Up to now, createplan.c attempted to share PARAM_EXEC slots for
NestLoopParams across different plan levels, if the same underlying Var
was being fed down to different righthand-side subplan trees by different
NestLoops. This was, I think, more of an artifact of using subselect.c's
PlannerParamItem infrastructure than an explicit design goal, but anyway
that was the end result.
This works well enough as long as the plan tree is executing synchronously,
but the feature whereby Gather can execute the parallelized subplan locally
breaks it. An upper NestLoop node might execute for a row retrieved from
a parallel worker, and assign a value for a PARAM_EXEC slot from that row,
while the leader's copy of the parallelized subplan is suspended with a
different active value of the row the Var comes from. When control
eventually returns to the leader's subplan, it gets the wrong answers if
the same PARAM_EXEC slot is being used within the subplan, as reported
in bug #15577 from Bartosz Polnik.
This is pretty reminiscent of the problem fixed in commit 46c508fbc, and
the proper fix seems to be the same: don't try to share PARAM_EXEC slots
across different levels of controlling NestLoop nodes.
This requires decoupling NestLoopParam handling from PlannerParamItem
handling, although the logic remains somewhat similar. To avoid bizarre
division of labor between subselect.c and createplan.c, I decided to move
all the param-slot-assignment logic for both cases out of those files
and put it into a new file paramassign.c. Hopefully it's a bit better
documented now, too.
A regression test case for this might be nice, but we don't know a
test case that triggers the problem with a suitably small amount
of data.
Back-patch to 9.6 where we added Gather nodes. It's conceivable that
related problems exist in older branches; but without some evidence
for that, I'll leave the older branches alone.
Tom Lane [Tue, 8 Jan 2019 17:03:54 +0000 (12:03 -0500)]
Doc: update our docs about kernel IPC parameters on *BSD.
runtime.sgml said that you couldn't change SysV IPC parameters on OpenBSD
except by rebuilding the kernel. That's definitely wrong in OpenBSD 6.x,
and excavation in their man pages says it changed in OpenBSD 3.3.
Update NetBSD and OpenBSD sections to recommend adjustment of the SEMMNI
and SEMMNS settings, which are painfully small by default on those
platforms. (The discussion thread contemplated recommending that
people select POSIX semaphores instead, but the performance consequences
of that aren't really clear, so I'll refrain.)
Remove pointless discussion of SEMMNU and SEMMAP from the FreeBSD
section. Minor other wordsmithing.
Tom Lane [Thu, 3 Jan 2019 22:00:08 +0000 (17:00 -0500)]
Improve ANALYZE's handling of concurrent-update scenarios.
This patch changes the rule for whether or not a tuple seen by ANALYZE
should be included in its sample.
When we last touched this logic, in commit 51e1445f1, we weren't
thinking very hard about tuples being UPDATEd by a long-running
concurrent transaction. In such a case, we might see the pre-image as
either LIVE or DELETE_IN_PROGRESS depending on timing; and we might see
the post-image not at all, or as INSERT_IN_PROGRESS. Since the existing
code will not sample either DELETE_IN_PROGRESS or INSERT_IN_PROGRESS
tuples, this leads to concurrently-updated rows being omitted from the
sample entirely. That's not very helpful, and it's especially the wrong
thing if the concurrent transaction ends up rolling back.
The right thing seems to be to sample DELETE_IN_PROGRESS rows just as if
they were live. This makes the "sample it" and "count it" decisions the
same, which seems good for consistency. It's clearly the right thing
if the concurrent transaction ends up rolling back; in effect, we are
sampling as though IN_PROGRESS transactions haven't happened yet.
Also, this combination of choices ensures maximum robustness against
the different combinations of whether and in which state we might see the
pre- and post-images of an update.
It's slightly annoying that we end up recording immediately-out-of-date
stats in the case where the transaction does commit, but on the other
hand the stats are fine for columns that didn't change in the update.
And the alternative of sampling INSERT_IN_PROGRESS rows instead seems
like a bad idea, because then the sampling would be inconsistent with
the way rows are counted for the stats report.
Per report from Mark Chambers; thanks to Jeff Janes for diagnosing
what was happening. Back-patch to all supported versions.
Debian testing and newer now require that RSA and DHE keys are at
least 2048 bit long and no longer allow SHA-1 for signatures in
certificates. This is currently causing the ssl tests to fail there
because the test certificates and keys have been created in violation
of those conditions.
Update the parameters to create the test files and create a new set of
test files.
Author: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp> Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20180917131340.GE31460%40paquier.xyz
Tom Lane [Wed, 2 Jan 2019 21:33:48 +0000 (16:33 -0500)]
Don't believe MinMaxExpr is leakproof without checking.
MinMaxExpr invokes the btree comparison function for its input datatype,
so it's only leakproof if that function is. Many such functions are
indeed leakproof, but others are not, and we should not just assume that
they are. Hence, adjust contain_leaked_vars to verify the leakproofness
of the referenced function explicitly.
I didn't add a regression test because it would need to depend on
some particular comparison function being leaky, and that's a moving
target, per discussion.
This has been wrong all along, so back-patch to supported branches.
Detect it the way pg_ctl's wait_for_postmaster() does. When pg_regress
spawned a postmaster that failed startup, we were detecting that only
with "pg_regress: postmaster did not respond within 60 seconds".
Back-patch to 9.4 (all supported versions).
Alvaro Herrera [Thu, 27 Dec 2018 19:17:40 +0000 (16:17 -0300)]
Have DISCARD ALL/TEMP remove leftover temp tables
Previously, it would only remove temp tables created in the same
session; but if the session uses the BackendId of a previously crashed
backend that left temp tables around, those would not get removed.
Since autovacuum would not drop them either (because it sees that the
BackendId is in use by the current session) these can cause annoying
xid-wraparound warnings.
Apply to branches 9.4 to 10. This is not a problem since version 11,
because commit 943576bddcb5 added state tracking that makes autovacuum
realize that those temp tables are not ours, so it removes them.
This is useful to handle in DISCARD, because even though it does not
handle all situations, it does handle the common one where a connection
pooler keeps the same session open for an indefinitely long time.
Alvaro Herrera [Thu, 27 Dec 2018 19:00:39 +0000 (16:00 -0300)]
Make autovacuum more selective about temp tables to keep
When temp tables are in danger of XID wraparound, autovacuum drops them;
however, it preserves those that are owned by a working session. This
is desirable, except when the session is connected to a different
database (because the temp tables cannot be from that session), so make
it only keep the temp tables only if the backend is in the same database
as the temp tables.
This is not bulletproof: it fails to detect temp tables left by a
session whose backend ID is reused in the same database but the new
session does not use temp tables. Commit 943576bddcb5 fixes that case
too, for branches 11 and up (which is why we don't apply this fix to
those branches), but back-patching that one is not universally agreed
on.
Michael Paquier [Thu, 27 Dec 2018 01:17:21 +0000 (10:17 +0900)]
Ignore inherited temp relations from other sessions when truncating
Inheritance trees can include temporary tables if the parent is
permanent, which makes possible the presence of multiple temporary
children from different sessions. Trying to issue a TRUNCATE on the
parent in this scenario causes a failure, so similarly to any other
queries just ignore such cases, which makes TRUNCATE work
transparently.
This makes truncation behave similarly to any other DML query working on
the parent table with queries which need to be issues on children. A
set of isolation tests is added to cover basic cases.
Reported-by: Zhou Digoal
Author: Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/15565-ce67a48d0244436a@postgresql.org
Backpatch-through: 9.4
Tom Lane [Wed, 26 Dec 2018 20:30:10 +0000 (15:30 -0500)]
Fix portability failure introduced in commits d2b0b60e7 et al.
I made a frontend fprintf() format use %m, forgetting that that's only
safe in HEAD not the back branches; prior to 96bf88d52 and d6c55de1f,
it would work on glibc platforms but not elsewhere. Revert to using
%s ... strerror(errno) as the code did before.
We could have left HEAD as-is, but for code consistency across branches,
I chose to apply this patch there too.
Michael Paquier [Mon, 24 Dec 2018 11:26:11 +0000 (20:26 +0900)]
Prioritize history files when archiving
At the end of recovery for the post-promotion process, a new history
file is created followed by the last partial segment of the previous
timeline. Based on the timing, the archiver would first try to archive
the last partial segment and then the history file. This can delay the
detection of a new timeline taken, particularly depending on the time it
takes to transfer the last partial segment as it delays the moment the
history file of the new timeline gets archived. This can cause promoted
standbys to use the same timeline as one already taken depending on the
circumstances if multiple instances look at archives at the same
location.
This commit changes the order of archiving so as history files are
archived in priority over other file types, which reduces the likelihood
of the same timeline being taken (still not reducing the window to
zero), and it makes the archiver behave more consistently with the
startup process doing its post-promotion business.
Author: David Steele Reviewed-by: Michael Paquier, Kyotaro Horiguchi
Discussion: https://postgr.es/m/929068cf-69e1-bba2-9dc0-e05986aed471@pgmasters.net
Backpatch-through: 9.5
Check for conflicting queries during replay of gistvacuumpage()
013ebc0a7b implements so-called GiST microvacuum. That is gistgettuple() marks
index tuples as dead when kill_prior_tuple is set. Later, when new tuple
insertion claims page space, those dead index tuples are physically deleted
from page. When this deletion is replayed on standby, it might conflict with
read-only queries. But 013ebc0a7b doesn't handle this. That may lead to
disappearance of some tuples from read-only snapshots on standby.
This commit implements resolving of conflicts between replay of GiST microvacuum
and standby queries. On the master we implement new WAL record type
XLOG_GIST_DELETE, which comprises necessary information. On stable releases
we've to be tricky to keep WAL compatibility. Information required for conflict
processing is just appended to data of XLOG_GIST_PAGE_UPDATE record. So,
PostgreSQL version, which doesn't know about conflict processing, will just
ignore that.
Reported-by: Andres Freund Diagnosed-by: Andres Freund
Discussion: https://postgr.es/m/20181212224524.scafnlyjindmrbe6%40alap3.anarazel.de
Author: Alexander Korotkov
Backpatch-through: 9.6
Tom Lane [Thu, 20 Dec 2018 18:55:11 +0000 (13:55 -0500)]
Doc: fix ancient mistake in search_path documentation.
"$user" in a search_path string is replaced by CURRENT_USER not
SESSION_USER. (It actually was SESSION_USER in the initial implementation,
but we changed it shortly later, and evidently forgot to fix the docs to
match.)
Greg Stark [Wed, 19 Dec 2018 23:28:35 +0000 (18:28 -0500)]
Fix ADD IF NOT EXISTS used in conjunction with ALTER TABLE ONLY
The flag for IF NOT EXISTS was only being passed down in the normal
recursing case. It's been this way since originally added in 9.6 in
commit 2cd40adb85 so backpatch back to 9.6.
Tom Lane [Tue, 18 Dec 2018 16:19:39 +0000 (11:19 -0500)]
Fix ancient thinko in mergejoin cost estimation.
"rescanratio" was computed as 1 + rescanned-tuples / total-inner-tuples,
which is sensible if it's to be multiplied by total-inner-tuples or a cost
value corresponding to scanning all the inner tuples. But in reality it
was (mostly) multiplied by inner_rows or a related cost, numbers that take
into account the possibility of stopping short of scanning the whole inner
relation thanks to a limited key range in the outer relation. This'd
still make sense if we could expect that stopping short would result in a
proportional decrease in the number of tuples that have to be rescanned.
It does not, however. The argument that establishes the validity of our
estimate for that number is independent of whether we scan all of the inner
relation or stop short, and experimentation also shows that stopping short
doesn't reduce the number of rescanned tuples. So the correct calculation
is 1 + rescanned-tuples / inner_rows, and we should be sure to multiply
that by inner_rows or a corresponding cost value.
Most of the time this doesn't make much difference, but if we have
both a high rescan rate (due to lots of duplicate values) and an outer
key range much smaller than the inner key range, then the error can
be significant, leading to a large underestimate of the cost associated
with rescanning.
Per report from Vijaykumar Jain. This thinko appears to go all the way
back to the introduction of the rescan estimation logic in commit 70fba7043, so back-patch to all supported branches.
Michael Paquier [Mon, 17 Dec 2018 01:36:29 +0000 (10:36 +0900)]
Make constraint rename issue relcache invalidation on target relation
When a constraint gets renamed, it may have associated with it a target
relation (for example domain constraints don't have one). Not
invalidating the target relation cache when issuing the renaming can
result in issues with subsequent commands that refer to the old
constraint name using the relation cache, causing various failures. One
pattern spotted was using CREATE TABLE LIKE after a constraint
renaming.
Reported-by: Stuart <sfbarbee@gmail.com>
Author: Amit Langote Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/2047094.V130LYfLq4@station53.ousa.org
Tom Lane [Sun, 16 Dec 2018 19:51:48 +0000 (14:51 -0500)]
Make error handling in parallel pg_upgrade less bogus.
reap_child() basically ignored the possibility of either an error in
waitpid() itself or a child process failure on signal. We don't really
need to do more than report and crash hard, but proceeding as though
nothing is wrong is definitely Not Acceptable. The error report for
nonzero child exit status was pretty off-point, as well.
Noted while fooling around with child-process failure detection
logic elsewhere. It's been like this a long time, so back-patch to
all supported branches.
Prevent GIN deleted pages from being reclaimed too early
When GIN vacuum deletes a posting tree page, it assumes that no concurrent
searchers can access it, thanks to ginStepRight() locking two pages at once.
However, since 9.4 searches can skip parts of posting trees descending from the
root. That leads to the risk that page is deleted and reclaimed before
concurrent search can access it.
This commit prevents the risk of above by waiting for every transaction, which
might wait to reference this page, to finish. Due to binary compatibility
we can't change GinPageOpaqueData to store corresponding transaction id.
Instead we reuse page header pd_prune_xid field, which is unused in index pages.
Discussion: https://postgr.es/m/31a702a.14dd.166c1366ac1.Coremail.chjischj%40163.com
Author: Andrey Borodin, Alexander Korotkov Reviewed-by: Alexander Korotkov
Backpatch-through: 9.4
On standby ginRedoDeletePage() can work concurrently with read-only queries.
Those queries can traverse posting tree in two ways.
1) Using rightlinks by ginStepRight(), which locks the next page before
unlocking its left sibling.
2) Using downlinks by ginFindLeafPage(), which locks at most one page at time.
Original lock order was: page, parent, left sibling. That lock order can
deadlock with ginStepRight(). In order to prevent deadlock this commit changes
lock order to: left sibling, page, parent. Note, that position of parent in
locking order seems insignificant, because we only lock one page at time while
traversing downlinks.
Reported-by: Chen Huajun Diagnosed-by: Chen Huajun, Peter Geoghegan, Andrey Borodin
Discussion: https://postgr.es/m/31a702a.14dd.166c1366ac1.Coremail.chjischj%40163.com
Author: Alexander Korotkov
Backpatch-through: 9.4
Tom Lane [Wed, 12 Dec 2018 21:08:30 +0000 (16:08 -0500)]
Repair bogus EPQ plans generated for postgres_fdw foreign joins.
postgres_fdw's postgresGetForeignPlan() assumes without checking that the
outer_plan it's given for a join relation must have a NestLoop, MergeJoin,
or HashJoin node at the top. That's been wrong at least since commit 4bbf6edfb (which could cause insertion of a Sort node on top) and it seems
like a pretty unsafe thing to Just Assume even without that.
Through blind good fortune, this doesn't seem to have any worse
consequences today than strange EXPLAIN output, but it's clearly trouble
waiting to happen.
To fix, test the node type explicitly before touching Join-specific
fields, and avoid jamming the new tlist into a node type that can't
do projection. Export a new support function from createplan.c
to avoid building low-level knowledge about the latter into FDWs.
Back-patch to 9.6 where the faulty coding was added. Note that the
associated regression test cases don't show any changes before v11,
apparently because the tests back-patched with 4bbf6edfb don't actually
exercise the problem case before then (there's no top-level Sort
in those plans).
Tom Lane [Wed, 12 Dec 2018 18:49:42 +0000 (13:49 -0500)]
Repair bogus handling of multi-assignment Params in upper plan levels.
Our support for multiple-set-clauses in UPDATE assumes that the Params
referencing a MULTIEXPR_SUBLINK SubPlan will appear before that SubPlan
in the targetlist of the plan node that calculates the updated row.
(Yeah, it's a hack...) In some PG branches it's possible that a Result
node gets inserted between the primary calculation of the update tlist
and the ModifyTable node. setrefs.c did the wrong thing in this case
and left the upper-level Params as Params, causing a crash at runtime.
What it should do is replace them with "outer" Vars referencing the child
plan node's output. That's a result of careless ordering of operations
in fix_upper_expr_mutator, so we can fix it just by reordering the code.
Fix fix_join_expr_mutator similarly for consistency, even though join
nodes could never appear in such a context. (In general, it seems
likely to be a bit cheaper to use Vars than Params in such situations
anyway, so this patch might offer a tiny performance improvement.)
The hazard extends back to 9.5 where the MULTIEXPR_SUBLINK stuff
was introduced, so back-patch that far. However, this may be a live
bug only in 9.6.x and 10.x, as the other branches don't seem to want
to calculate the final tlist below the Result node. (That plan shape
change between branches might be a mini-bug in itself, but I'm not
really interested in digging into the reasons for that right now.
Still, add a regression test memorializing what we expect there,
so we'll notice if it changes again.)
Tom Lane [Tue, 11 Dec 2018 16:48:00 +0000 (11:48 -0500)]
Fix test_rls_hooks to assign expression collations properly.
This module overlooked this necessary fixup step on the results of
transformWhereClause(). It accidentally worked anyway, because the
constructed expression involved type "name" which is not collatable,
but it fell over while I was experimenting with changing "name" to
be collatable.
Back-patch, not because there's any live bug here in back branches,
but because somebody might use this code as a model for some real
application and then not understand why it doesn't work.
Tom Lane [Tue, 11 Dec 2018 16:21:36 +0000 (11:21 -0500)]
Doc: improve documentation about ALTER LARGE OBJECT requirements.
Unlike other ALTER ref pages, this one neglected to mention that
ALTER OWNER requires being a member of the new owning role.
Per bug #15546 from Stefan Kadow.
Noah Misch [Tue, 11 Dec 2018 04:15:42 +0000 (20:15 -0800)]
Raise some timeouts to 180s, in test code.
Slow runs of buildfarm members chipmunk, hornet and mandrill saw the
shorter timeouts expire. The 180s timeout in poll_query_until has been
trouble-free since 2a0f89cd717ce6d49cdc47850577823682167e87 introduced
it two years ago, so use 180s more widely. Back-patch to 9.6, where the
first of these timeouts was introduced.
Tom Lane [Fri, 7 Dec 2018 17:12:00 +0000 (12:12 -0500)]
Fix misapplication of pgstat_count_truncate to wrong relation.
The stanza of ExecuteTruncate[Guts] that truncates a target table's toast
relation re-used the loop local variable "rel" to reference the toast rel.
This was safe enough when written, but commit d42358efb added code below
that that supposed "rel" still pointed to the parent table. Therefore,
the stats counter update was applied to the wrong relcache entry (the
toast rel not the user rel); and if we were unlucky and that relcache
entry had been flushed during reindex_relation, very bad things could
ensue.
(I'm surprised that CLOBBER_CACHE_ALWAYS testing hasn't found this.
I'm even more surprised that the problem wasn't detected during the
development of d42358efb; it must not have been tested in any case
with a toast table, as the incorrect stats counts are very obvious.)
To fix, replace use of "rel" in that code branch with a more local
variable. Adjust test cases added by d42358efb so that some of them
use tables with toast tables.
Per bug #15540 from Pan Bian. Back-patch to 9.5 where d42358efb came in.
Tom Lane [Thu, 6 Dec 2018 20:08:44 +0000 (15:08 -0500)]
Improve our response to invalid format strings, and detect more cases.
Places that are testing for *printf failure ought to include the format
string in their error reports, since bad-format-string is one of the
more likely causes of such failure. This both makes it easier to find
and repair the mistake, and provides at least some useful info to the
user who stumbles across such a problem.
Also, tighten snprintf.c to report EINVAL for an invalid flag or
final character in a format %-spec (including the case where the
%-spec is missing a final character altogether). This seems like
better project policy, and it also allows removing an instruction
or two from the hot code path.
Back-patch the error reporting change in pvsnprintf, since it should be
harmless and may be helpful; but not the snprintf.c change.
Per discussion of bug #15511 from Ertuğrul Kahveci, which reported an
invalid translated format string. These changes don't fix that error,
but they should improve matters next time we make such a mistake.
Tom Lane [Thu, 29 Nov 2018 23:28:11 +0000 (18:28 -0500)]
Document handling of invalid/ambiguous timestamp input near DST boundaries.
The source code comments documented this, but the user-facing docs, not
so much. Add a section to Appendix B that discusses it.
In passing, improve a couple other things in Appendix B --- notably,
a long-obsolete claim that time zone abbreviations are looked up in
a fixed table.
Tom Lane [Thu, 29 Nov 2018 20:53:44 +0000 (15:53 -0500)]
Ensure static libraries have correct mod time even if ranlib messes it up.
In at least Apple's version of ranlib, the output file is updated to have
a mod time equal to the max of the timestamps of its components, and that
data only has seconds precision. On a filesystem with sub-second file
timestamp precision --- say, APFS --- this can result in the finished
static library appearing older than its input files, which causes useless
rebuilds and possible outright failures in parallel makes.
We've only seen this reported in the field from people using Apple's
ranlib with a non-Apple make, because Apple's make doesn't know about
sub-second timestamps either so it doesn't decide rebuilds are needed.
But Apple's ranlib presumably shares code with at least some BSDen,
so it's not that unlikely that the same problem could arise elsewhere.
To fix, just "touch" the output file after ranlib finishes.
We seem to need this in only one place. There are other calls of
ranlib in our makefiles, but they are working on intermediate files
whose timestamps are not actually important, or else on an installed
static library for which sub-second timestamp precision is unlikely
to matter either. (Also, so far as I can tell, Apple's ranlib doesn't
mess up the file timestamp in the latter usage anyhow.)
In passing, change "ranlib" to "$(RANLIB)" in one place that was
bypassing the make macro for no good reason.
Per bug #15525 from Jack Kelly (via Alyssa Ross).
Back-patch to all supported branches.
Michael Paquier [Thu, 29 Nov 2018 00:12:53 +0000 (09:12 +0900)]
Fix handling of synchronous replication for stopping WAL senders
This fixes an oversight from c6c3334 which forgot that if a subset of
WAL senders are stopping and in a sync state, other WAL senders could
still be waiting for a WAL position to be synced while committing a
transaction. However the subset of stopping senders would not release
waiters, potentially breaking synchronous replication guarantees. This
commit makes sure that even WAL senders stopping are able to release
waiters and are tracked properly.
On 9.4, this can also trigger an assertion failure when setting for
example max_wal_senders to 1 where a WAL sender is not able to find
itself as in synchronous state when the instance stops.
Reported-by: Paul Guo
Author: Paul Guo, Michael Paquier
Discussion: https://postgr.es/m/CAEET0ZEv8VFqT3C-cQm6byOB4r4VYWcef1J21dOX-gcVhCSpmA@mail.gmail.com
Backpatch-through: 9.4
Thomas Munro [Wed, 28 Nov 2018 01:00:57 +0000 (14:00 +1300)]
Don't set PAM_RHOST for Unix sockets.
Since commit 2f1d2b7a we have set PAM_RHOST to "[local]" for Unix
sockets. This caused Linux PAM's libaudit integration to make DNS
requests for that name. It's not exactly clear what value PAM_RHOST
should have in that case, but it seems clear that we shouldn't set it
to an unresolvable name, so don't do that.
Back-patch to 9.6. Bug #15520.
Author: Thomas Munro Reviewed-by: Peter Eisentraut Reported-by: Albert Schabhuetl
Discussion: https://postgr.es/m/15520-4c266f986998e1c5%40postgresql.org
Tomas Vondra [Wed, 28 Nov 2018 00:11:15 +0000 (01:11 +0100)]
Do not decode TOAST data for table rewrites
During table rewrites (VACUUM FULL and CLUSTER), the main heap is logged
using XLOG / FPI records, and thus (correctly) ignored in decoding.
But the associated TOAST table is WAL-logged as plain INSERT records,
and so was logically decoded and passed to reorder buffer.
That has severe consequences with TOAST tables of non-trivial size.
Firstly, reorder buffer has to keep all those changes, possibly spilling
them to a file, incurring I/O costs and disk space.
Secondly, ReoderBufferCommit() was stashing all those TOAST chunks into
a hash table, which got discarded only after processing the row from the
main heap. But as the main heap is not decoded for rewrites, this never
happened, so all the TOAST data accumulated in memory, resulting either
in excessive memory consumption or OOM.
The fix is simple, as commit e9edc1ba already introduced infrastructure
(namely HEAP_INSERT_NO_LOGICAL flag) to skip logical decoding of TOAST
tables, but it only applied it to system tables. So simply use it for
all TOAST data in raw_heap_insert().
That would however solve only the memory consumption issue - the TOAST
changes would still be decoded and added to the reorder buffer, and
spilled to disk (although without TOAST tuple data, so much smaller).
But we can solve that by tweaking DecodeInsert() to just ignore such
INSERT records altogether, using XLH_INSERT_CONTAINS_NEW_TUPLE flag,
instead of skipping them later in ReorderBufferCommit().
Review: Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/flat/1a17c643-e9af-3dba-486b-fbe31bc1823a%402ndquadrant.com
Backpatch: 9.4-, where logical decoding was introduced
Unfortunately ac218aa4f6 missed the fact that a reference to
'pg_catalog.regnamespace'::regclass wouldn't work before that type is
known. Fix that, by replacing the regtype usage with a join to
pg_type.
Reported-By: Tom Lane
Author: Andres Freund
Discussion: https://postgr.es/m/8863.1543297423@sss.pgh.pa.us
Backpatch: 9.5-, like ac218aa4f6
Andres Freund [Tue, 27 Nov 2018 01:00:43 +0000 (17:00 -0800)]
Update pg_upgrade test for reg* to include regrole and regnamespace.
When the regrole (0c90f6769) and regnamespace (cb9fa802b) types were
added in 9.5, pg_upgrade's check for reg* types wasn't updated. While
regrole currently is safe, regnamespace is not.
It seems unlikely that anybody uses regnamespace inside catalog tables
across a pg_upgrade, but the tests should be correct nevertheless.
While at it, reorder the types checked in the query to be
alphabetical. Otherwise it's annoying to compare existing and tested
for types.
Author: Andres Freund
Discussion: https://postgr.es/m/037e152a-cb25-3bcb-4f35-bdc9988f8204@2ndQuadrant.com
Backpatch: 9.5-, as regrole/regnamespace
Tom Lane [Mon, 26 Nov 2018 22:32:51 +0000 (17:32 -0500)]
Fix translation of special characters in psql's LaTeX output modes.
latex_escaped_print() mistranslated \ and failed to provide any translation
for # ^ and ~, all of which would typically lead to LaTeX document syntax
errors. In addition it didn't translate < > and |, which would typically
render as unexpected characters.
To some extent this represents shortcomings in ancient versions of LaTeX,
which if memory serves had no easy way to render these control characters
as ASCII text. But that's been fixed for, um, decades. In any case there
is no value in emitting guaranteed-to-fail output for these characters.
Noted while fooling with test cases added by commit 9a98984f4. Back-patch
the code change to all supported versions.
Andrew Gierth [Sat, 24 Nov 2018 09:59:49 +0000 (09:59 +0000)]
Fix hstore hash function for empty hstores upgraded from 8.4.
Hstore data generated on pg 8.4 and pg_upgraded to current versions
remains in its original on-disk format unless modified. The same goes
for values generated by the addon hstore-new module on pre-9.0
versions. (The hstoreUpgrade function converts old values on the fly
when read in, but the on-disk value is not modified by this.)
Since old-format empty hstores (and hstore-new hstores) have
representations compatible with the new format, hstoreUpgrade thought
it could get away without modifying such values; but this breaks
hstore_hash (and the new hstore_hash_extended) which assumes
bit-perfect matching between semantically identical hstore values.
Only one bit actually differs (the "new version" flag in the count
field) but that of course is enough to break the hash.
Fix by making hstoreUpgrade unconditionally convert all old values to
new format.
Backpatch all the way, even though this changes a hash value in some
cases, because in those cases the hash value is already failing - for
example, a hash join between old- and new-format empty hstores will be
failing to match, or a hash index on an hstore column containing an
old-format empty value will be failing to find the value since it will
be searching for a hash derived from a new-format datum. (There are no
known field reports of this happening, probably because hashing of
hstores has only been useful in limited circumstances and there
probably isn't much upgraded data being used this way.)
Per concerns arising from discussion of commit eb6f29141be. Original
bug is my fault.
Tom Lane [Sat, 24 Nov 2018 17:45:50 +0000 (12:45 -0500)]
Fix float-to-integer coercions to handle edge cases correctly.
ftoi4 and its sibling coercion functions did their overflow checks in
a way that looked superficially plausible, but actually depended on an
assumption that the MIN and MAX comparison constants can be represented
exactly in the float4 or float8 domain. That fails in ftoi4, ftoi8,
and dtoi8, resulting in a possibility that values near the MAX limit will
be wrongly converted (to negative values) when they need to be rejected.
Also, because we compared before rounding off the fractional part,
the other three functions threw errors for values that really ought
to get rounded to the min or max integer value.
Fix by doing rint() first (requiring an assumption that it handles
NaN and Inf correctly; but dtoi8 and ftoi8 were assuming that already),
and by comparing to values that should coerce to float exactly, namely
INTxx_MIN and -INTxx_MIN. Also remove some random cosmetic discrepancies
between these six functions.
This back-patches commits cbdb8b4c0 and 452b637d4. In the 9.4 branch,
also back-patch the portion of 62e2a8dc2 that added PG_INTnn_MIN and
related constants to c.h, so that these functions can rely on them.
Per bug #15519 from Victor Petrovykh.
Patch by me; thanks to Andrew Gierth for analysis and discussion.
Andrew Gierth [Fri, 23 Nov 2018 23:56:39 +0000 (23:56 +0000)]
Avoid crashes in contrib/intarray gist__int_ops (bug #15518)
1. Integer overflow in internal_size could result in memory corruption
in decompression since a zero-length array would be allocated and then
written to. This leads to crashes or corruption when traversing an
index which has been populated with sufficiently sparse values. Fix by
using int64 for computations and checking for overflow.
2. Integer overflow in g_int_compress could cause pessimal merge
choices, resulting in unnecessarily large ranges (which would in turn
trigger issue 1 above). Fix by using int64 again.
3. Even without overflow, array sizes could become large enough to
cause unexplained memory allocation errors. Fix by capping the sizes
to a safe limit and report actual errors pointing at gist__intbig_ops
as needed.
4. Large inputs to the compression function always consist of large
runs of consecutive integers, and the compression loop was processing
these one at a time in an O(N^2) manner with a lot of overhead. The
expected runtime of this function could easily exceed 6 months for a
single call as a result. Fix by performing a linear-time first pass,
which reduces the worst case to something on the order of seconds.
Backpatch all the way, since this has been wrong forever.
Per bug #15518 from report from irc user "dymk", analysis and patch by
me.
Tom Lane [Mon, 19 Nov 2018 17:01:47 +0000 (12:01 -0500)]
Fix configure's AC_CHECK_DECLS tests to work correctly with clang.
The test case that Autoconf uses to discover whether a function has
been declared doesn't work reliably with clang, because clang reports
a warning not an error if the name is a known built-in function.
On some platforms, this results in a lot of compile-time warnings about
strlcpy and related functions not having been declared.
There is a fix for this (by Noah Misch) in the upstream Autoconf sources,
but since they've not made a release in years and show no indication of
doing so anytime soon, let's just absorb their fix directly. We can
revert this when and if we update to a newer Autoconf release.
Thomas Munro [Mon, 19 Nov 2018 00:40:57 +0000 (13:40 +1300)]
PANIC on fsync() failure.
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro Reported-by: Craig Ringer Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
Tomas Vondra [Sat, 17 Nov 2018 22:50:21 +0000 (23:50 +0100)]
Add valgrind suppressions for wcsrtombs optimizations
wcsrtombs (called through wchar2char from common functions like lower,
upper, etc.) uses various optimizations that may look like access to
uninitialized data, triggering valgrind reports.
For example AVX2 instructions load data in 256-bit chunks, and gconv
does something similar with 32-bit chunks. This is faster than accessing
the bytes one by one, and the uninitialized part of the buffer is not
actually used. So suppress the bogus reports.
The exact stack depends on possible optimizations - it might be AVX, SSE
(as in the report by Aleksander Alekseev) or something else. Hence the
last frame is wildcarded, to deal with this.
Backpatch all the way back to 9.4.
Author: Tomas Vondra
Discussion: https://www.postgresql.org/message-id/flat/90ac0452-e907-e7a4-b3c8-15bd33780e62%402ndquadrant.com
Discussion: https://www.postgresql.org/message-id/20180220150838.GD18315@e733.localdomain
Tom Lane [Wed, 14 Nov 2018 21:29:57 +0000 (16:29 -0500)]
Doc: remove claim that all \pset format options are unique in 1 letter.
This hasn't been correct since 9.3 added "latex-longtable".
I left the phraseology "Unique abbreviations are allowed" alone.
It's correct as far as it goes, and we are studiously refraining
from specifying exactly what happens if you give a non-unique
abbreviation. (The answer in the back branches is "you get a
backwards-compatible choice", and the answer in HEAD will shortly
be "you get an error", but there seems no need to mention such
details here.)
Tom Lane [Wed, 14 Nov 2018 16:27:31 +0000 (11:27 -0500)]
Second try at fixing numeric data passed through an ECPG SQLDA.
In commit ecfd55795, I removed sqlda.c's checks for ndigits != 0 on the
grounds that we should duplicate the state of the numeric value's digit
buffer even when all the digits are zeroes. However, that still isn't
quite right, because another possible state of the digit buffer is
buf == digits == NULL (this occurs for a NaN). As the code now stands,
it'll invoke memcpy with a NULL source address and zero bytecount,
which we know a few platforms crash on. Hence, reinstate the no-copy
short-circuit, but make it test specifically for buf != NULL rather than
some other condition. In hindsight, the ndigits test (added by commit f2ae9f9c3) was almost certainly meant to fix the NaN case not the
all-zeroes case as the associated thread alleged.
Michael Paquier [Wed, 14 Nov 2018 07:48:17 +0000 (16:48 +0900)]
Initialize TransactionState and user ID consistently at transaction start
If a failure happens when a transaction is starting between the moment
the transaction status is changed from TRANS_DEFAULT to TRANS_START and
the moment the current user ID and security context flags are fetched
via GetUserIdAndSecContext(), or before initializing its basic fields,
then those may get reset to incorrect values when the transaction
aborts, leaving the session in an inconsistent state.
One problem reported is that failing a starting transaction at the first
query of a session could cause several kinds of system crashes on the
follow-up queries.
In order to solve that, move the initialization of the transaction state
fields and the call of GetUserIdAndSecContext() in charge of fetching
the current user ID close to the point where the transaction status is
switched to TRANS_START, where there cannot be any error triggered
in-between, per an idea of Tom Lane. This properly ensures that the
current user ID, the security context flags and that the basic fields of
TransactionState remain consistent even if the transaction fails while
starting.
Reported-by: Richard Guo Diagnosed-By: Richard Guo
Author: Michael Paquier Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAN_9JTxECSb=pEPcb0a8d+6J+bDcOZ4=DgRo_B7Y5gRHJUM=Rw@mail.gmail.com
Backpatch-through: 9.4
Amit Kapila [Tue, 13 Nov 2018 05:13:35 +0000 (10:43 +0530)]
Fix the initialization of atomic variable introduced by the
group clearing mechanism.
Commit 0e141c0fbb introduced initialization of atomic variable in
InitProcess which means that it's not safe to look at it for backends that
aren't currently in use. Fix that by initializing the same during postmaster
startup.
Reported-by: Andres Freund
Author: Amit Kapila
Backpatch-through: 9.6
Discussion: https://postgr.es/m/20181027104138.qmbbelopvy7cw2qv@alap3.anarazel.de
Tom Lane [Mon, 12 Nov 2018 16:19:04 +0000 (11:19 -0500)]
Limit the number of index clauses considered in choose_bitmap_and().
classify_index_clause_usage() is O(N^2) in the number of distinct index
qual clauses it considers, because of its use of a simple search list to
store them. For nearly all queries, that's fine because only a few clauses
will be considered. But Alexander Kuzmenkov reported a machine-generated
query with 80000 (!) index qual clauses, which caused this code to take
forever. Somewhat remarkably, this is the only O(N^2) behavior we now
have for such a query, so let's fix it.
We can get rid of the O(N^2) runtime for cases like this without much
damage to the functionality of choose_bitmap_and() by separating out
paths with "too many" qual or pred clauses, and deeming them to always
be nonredundant with other paths. Then their clauses needn't go into
the search list, so it doesn't get too long, but we don't lose the
ability to consider bitmap AND plans altogether. I set the threshold
for "too many" to be 100 clauses per path, which should be plenty to
ensure no change in planning behavior for normal queries.
There are other things we could do to make this go faster, but it's not
clear that it's worth any additional effort. 80000 qual clauses require
a whole lot of work in many other places, too.
The code's been like this for a long time, so back-patch to all supported
branches. The troublesome query only works back to 9.5 (in 9.4 it fails
with stack overflow in the parser); so I'm not sure that fixing this in
9.4 has any real-world benefit, but perhaps it does.
Tom Lane [Sat, 10 Nov 2018 01:42:03 +0000 (20:42 -0500)]
Fix missing role dependencies for some schema and type ACLs.
This patch fixes several related cases in which pg_shdepend entries were
never made, or were lost, for references to roles appearing in the ACLs of
schemas and/or types. While that did no immediate harm, if a referenced
role were later dropped, the drop would be allowed and would leave a
dangling reference in the object's ACL. That still wasn't a big problem
for normal database usage, but it would cause obscure failures in
subsequent dump/reload or pg_upgrade attempts, taking the form of
attempts to grant privileges to all-numeric role names. (I think I've
seen field reports matching that symptom, but can't find any right now.)
Several cases are fixed here:
1. ALTER DOMAIN SET/DROP DEFAULT would lose the dependencies for any
existing ACL entries for the domain. This case is ancient, dating
back as far as we've had pg_shdepend tracking at all.
2. If a default type privilege applies, CREATE TYPE recorded the
ACL properly but forgot to install dependency entries for it.
This dates to the addition of default privileges for types in 9.2.
3. If a default schema privilege applies, CREATE SCHEMA recorded the
ACL properly but forgot to install dependency entries for it.
This dates to the addition of default privileges for schemas in v10
(commit ab89e465c).
Another somewhat-related problem is that when creating a relation
rowtype or implicit array type, TypeCreate would apply any available
default type privileges to that type, which we don't really want
since such an object isn't supposed to have privileges of its own.
(You can't, for example, drop such privileges once they've been added
to an array type.)
ab89e465c is also to blame for a race condition in the regression tests:
privileges.sql transiently installed globally-applicable default
privileges on schemas, which sometimes got absorbed into the ACLs of
schemas created by concurrent test scripts. This should have resulted
in failures when privileges.sql tried to drop the role holding such
privileges; but thanks to the bug fixed here, it instead led to dangling
ACLs in the final state of the regression database. We'd managed not to
notice that, but it became obvious in the wake of commit da906766c, which
allowed the race condition to occur in pg_upgrade tests.
To fix, add a function recordDependencyOnNewAcl to encapsulate what
callers of get_user_default_acl need to do; while the original call
sites got that right via ad-hoc code, none of the later-added ones
have. Also change GenerateTypeDependencies to generate these
dependencies, which requires adding the typacl to its parameter list.
(That might be annoying if there are any extensions calling that
function directly; but if there are, they're most likely buggy in the
same way as the core callers were, so they need work anyway.) While
I was at it, I changed GenerateTypeDependencies to accept most of its
parameters in the form of a Form_pg_type pointer, making its parameter
list a bit less unwieldy and mistake-prone.
The test race condition is fixed just by wrapping the addition and
removal of default privileges into a single transaction, so that that
state is never visible externally. We might eventually prefer to
separate out tests of default privileges into a script that runs by
itself, but that would be a bigger change and would make the tests
run slower overall.
Back-patch relevant parts to all supported branches.
Tom Lane [Thu, 8 Nov 2018 22:33:26 +0000 (17:33 -0500)]
Disallow setting client_min_messages higher than ERROR.
Previously it was possible to set client_min_messages to FATAL or PANIC,
which had the effect of suppressing transmission of regular ERROR messages
to the client. Perhaps that seemed like a useful option in the past, but
the trouble with it is that it breaks guarantees that are explicitly made
in our FE/BE protocol spec about how a query cycle can end. While libpq
and psql manage to cope with the omission, that's mostly because they
are not very bright; client libraries that have more semantic knowledge
are likely to get confused. Notably, pgODBC doesn't behave very sanely.
Let's fix this by getting rid of the ability to set client_min_messages
above ERROR.
In HEAD, just remove the FATAL and PANIC options from the set of allowed
enum values for client_min_messages. (This change also affects
trace_recovery_messages, but that's OK since these aren't useful values
for that variable either.)
In the back branches, there was concern that rejecting these values might
break applications that are explicitly setting things that way. I'm
pretty skeptical of that argument, but accommodate it by accepting these
values and then internally setting the variable to ERROR anyway.
In all branches, this allows a couple of tiny simplifications in the
logic in elog.c, so do that.
Also respond to the point that was made that client_min_messages has
exactly nothing to do with the server's logging behavior, and therefore
does not belong in the "When To Log" subsection of the documentation.
The "Statement Behavior" subsection is a better match, so move it there.
Andres Freund [Mon, 5 Nov 2018 20:02:25 +0000 (12:02 -0800)]
Fix copy-paste error in errhint() introduced in 691d79a07933.
Reported-By: Petr Jelinek
Discussion: https://postgr.es/m/c95a620b-34f0-7930-aeb5-f7ab804f26cb@2ndquadrant.com
Backpatch: 9.4-, like the previous commit
Tom Lane [Sat, 3 Nov 2018 17:56:10 +0000 (13:56 -0400)]
Make ts_locale.c's character-type functions cope with UTF-16.
On Windows, in UTF8 database encoding, what char2wchar() produces is
UTF16 not UTF32, ie, characters above U+FFFF will be represented by
surrogate pairs. t_isdigit() and siblings did not account for this
and failed to provide a large enough result buffer. That in turn
led to bogus "invalid multibyte character for locale" errors, because
contrary to what you might think from char2wchar()'s documentation,
its Windows code path doesn't cope sanely with buffer overflow.
The solution for t_isdigit() and siblings is pretty clear: provide
a 3-wchar_t result buffer not 2.
char2wchar() also needs some work to provide more consistent, and more
accurately documented, buffer overrun behavior. But that's a bigger job
and it doesn't actually have any immediate payoff, so leave it for later.
Per bug #15476 from Kenji Uno, who deserves credit for identifying the
cause of the problem. Back-patch to all active branches.
Tom Lane [Fri, 2 Nov 2018 22:54:00 +0000 (18:54 -0400)]
Yet further rethinking of build changes for macOS Mojave.
The solution arrived at in commit e74dd00f5 presumes that the compiler
has a suitable default -isysroot setting ... but further experience
shows that in many combinations of macOS version, XCode version, Xcode
command line tools version, and phase of the moon, Apple's compiler
will *not* supply a default -isysroot value.
We could potentially go back to the approach used in commit 68fc227dd,
but I don't have a lot of faith in the reliability or life expectancy of
that either. Let's just revert to the approach already shipped in 11.0,
namely specifying an -isysroot switch globally. As a partial response to
the concerns raised by Jakob Egger, adjust the contents of Makefile.global
to look like
This allows overriding the sysroot path at build time in a relatively
painless way.
Add documentation to installation.sgml about how to use the PG_SYSROOT
option. I also took the opportunity to document how to work around
macOS's "System Integrity Protection" feature.
Andres Freund [Wed, 31 Oct 2018 21:47:41 +0000 (14:47 -0700)]
Disallow starting server with insufficient wal_level for existing slot.
Previously it was possible to create a slot, change wal_level, and
restart, even if the new wal_level was insufficient for the
slot. That's a problem for both logical and physical slots, because
the necessary WAL records are not generated.
This removes a few tests in newer versions that, somewhat
inexplicably, whether restarting with a too low wal_level worked (a
buggy behaviour!).
Reported-By: Joshua D. Drake
Author: Andres Freund
Discussion: https://postgr.es/m/20181029191304.lbsmhshkyymhw22w@alap3.anarazel.de
Backpatch: 9.4-, where replication slots where introduced
Tom Lane [Wed, 31 Oct 2018 21:04:43 +0000 (17:04 -0400)]
Fix memory leak in repeated SPGIST index scans.
spgendscan neglected to pfree all the memory allocated by spgbeginscan.
It's possible to get away with that in most normal queries, since the
memory is allocated in the executor's per-query context which is about
to get deleted anyway; but it causes severe memory leakage during
creation or filling of large exclusion-constraint indexes.
Also, document that amendscan is supposed to free what ambeginscan
allocates. The docs' lack of clarity on that point probably caused this
bug to begin with. (There is discussion of changing that API spec going
forward, but I don't think it'd be appropriate for the back branches.)
Per report from Bruno Wolff. It's been like this since the beginning,
so back-patch to all active branches.
In HEAD, also fix an independent leak caused by commit 2a6368343
(allocating memory during spgrescan instead of spgbeginscan, which
might be all right if it got cleaned up, but it didn't). And do a bit
of code beautification on that commit, too.
Tom Lane [Wed, 31 Oct 2018 13:47:53 +0000 (09:47 -0400)]
Sync our copy of the timezone library with IANA release tzcode2018g.
This patch absorbs an upstream fix to "zic" for a recently-introduced
bug that made it output data that some 32-bit clients couldn't read.
Given the current source data, the bug only manifests in zones with
leap seconds, which we don't generate, so that there's no actual
change in our installed timezone data files from this. Still, in
case somebody uses our copy of "zic" to do something else, it seems
best to apply the fix promptly.
Also, update the README's notes about converting upstream code to
our conventions.
Andrew Dunstan [Sun, 28 Oct 2018 16:22:32 +0000 (12:22 -0400)]
Fix perl searchpath for modern perl for MSVC tools
Modern versions of perl no longer include the current directory in the
perl searchpath, as it's insecure. Instead of adding the current
directory, we get around the problem by adding the directory where the
script lives.
Andrew Dunstan [Sat, 20 Oct 2018 13:02:36 +0000 (09:02 -0400)]
Lower privilege level of programs calling regression_main
On Windows this mean that the regression tests can now safely and
successfully run as Administrator, which is useful in situations like
Appveyor. Elsewhere it's a no-op.
Backpatch to 9.5 - this is harder in earlier branches and not worth the
trouble.
Tom Lane [Sat, 20 Oct 2018 02:22:57 +0000 (22:22 -0400)]
Client-side fixes for delayed NOTIFY receipt.
PQnotifies() is defined to just process already-read data, not try to read
any more from the socket. (This is a debatable decision, perhaps, but I'm
hesitant to change longstanding library behavior.) The documentation has
long recommended calling PQconsumeInput() before PQnotifies() to ensure
that any already-arrived message would get absorbed and processed.
However, psql did not get that memo, which explains why it's not very
reliable about reporting notifications promptly.
Also, most (not quite all) callers called PQconsumeInput() just once before
a PQnotifies() loop. Taking this recommendation seriously implies that we
should do PQconsumeInput() before each call. This is more important now
that we have "payload" strings in notification messages than it was before;
that increases the probability of having more than one packet's worth
of notify messages. Hence, adjust code as well as documentation examples
to do it like that.
Back-patch to 9.5 to match related server fixes. In principle we could
probably go back further with these changes, but given lack of field
complaints I doubt it's worthwhile.
Tom Lane [Sat, 20 Oct 2018 01:39:22 +0000 (21:39 -0400)]
Server-side fix for delayed NOTIFY and SIGTERM processing.
Commit 4f85fde8e introduced some code that was meant to ensure that we'd
process cancel, die, sinval catchup, and notify interrupts while waiting
for client input. But there was a flaw: it supposed that the process
latch would be set upon arrival at secure_read() if any such interrupt
was pending. In reality, we might well have cleared the process latch
at some earlier point while those flags remained set -- particularly
notifyInterruptPending, which can't be handled as long as we're within
a transaction.
To fix the NOTIFY case, also attempt to process signals (except
ProcDiePending) before trying to read.
Also, if we see that ProcDiePending is set before we read, forcibly set the
process latch to ensure that we will handle that signal promptly if no data
is available. I also made it set the process latch on the way out, in case
there is similar logic elsewhere. (It remains true that we won't service
ProcDiePending here unless we need to wait for input.)
The code for handling ProcDiePending during a write needs those changes,
too.
Also be a little more careful about when to reset whereToSendOutput,
and improve related comments.
Back-patch to 9.5 where this code was added. I'm not entirely convinced
that older branches don't have similar issues, but the complaint at hand
is just about the >= 9.5 code.
Tom Lane [Fri, 19 Oct 2018 23:36:34 +0000 (19:36 -0400)]
Sync our copy of the timezone library with IANA release tzcode2018f.
About half of this is purely cosmetic changes to reduce the diff between
our code and theirs, like inserting "const" markers where they have them.
The other half is tracking actual code changes in zic.c and localtime.c.
I don't think any of these represent near-term compatibility hazards, but
it seems best to stay up to date.
I also fixed longstanding bugs in our code for producing the
known_abbrevs.txt list, which by chance hadn't been exposed before,
but which resulted in some garbage output after applying the upstream
changes in zic.c. Notably, because upstream removed their old phony
transitions at the Big Bang, it's now necessary to cope with TZif files
containing no DST transition times at all.
Tom Lane [Fri, 19 Oct 2018 21:01:34 +0000 (17:01 -0400)]
Update time zone data files to tzdata release 2018f.
DST law changes in Chile, Fiji, and Russia (Volgograd).
Historical corrections for China, Japan, Macau, and North Korea.
Note: like the previous tzdata update, this involves a depressingly
large amount of semantically-meaningless churn in tzdata.zi. That
is a consequence of upstream's data compression method assigning
unstable abbreviations to DST rulesets. I complained about that
to them last time, and this version now uses an assignment method
that pays some heed to not changing abbreviations unnecessarily.
So hopefully, that'll be better going forward.
Tom Lane [Thu, 18 Oct 2018 18:55:23 +0000 (14:55 -0400)]
Still further rethinking of build changes for macOS Mojave.
To avoid the sorts of problems complained of by Jakob Egger, it'd be
best if configure didn't emit any references to the sysroot path at all.
In the case of PL/Tcl, we can do that just by keeping our hands off the
TCL_INCLUDE_SPEC string altogether. In the case of PL/Perl, we need to
substitute -iwithsysroot for -I in the compile commands, which is easily
handled if we change to using a configure output variable that includes
the switch not only the directory name. Since PL/Tcl and PL/Python
already do it like that, this seems like good consistency cleanup anyway.
Hence, this replaces the advice given to Perl-related extensions in commit 5e2217131; instead of writing "-I$(perl_archlibexp)/CORE", they should
just write "$(perl_includespec)". (The old way continues to work, but not
on recent macOS.)
It's still the case that configure needs to be aware of the sysroot
path internally, but that's cleaner than what we had before.
Tom Lane [Wed, 17 Oct 2018 19:06:38 +0000 (15:06 -0400)]
Fix minor bug in isolationtester.
If the lock wait query failed, isolationtester would report the
PQerrorMessage from some other connection, meaning there would be
no message or an unrelated one. This seems like a pretty unlikely
occurrence, but if it did happen, this bug could make it really
difficult/confusing to figure out what happened. That seems to
justify patching all the way back.
In passing, clean up another place where the "wrong" conn was used
for an error report. That one's not actually buggy because it's
a different alias for the same connection, but it's still confusing
to the reader.
Tom Lane [Wed, 17 Oct 2018 16:26:48 +0000 (12:26 -0400)]
Improve tzparse's handling of TZDEFRULES ("posixrules") zone data.
In the IANA timezone code, tzparse() always tries to load the zone
file named by TZDEFRULES ("posixrules"). Previously, we'd hacked
that logic to skip the load in the "lastditch" code path, which we use
only to initialize the default "GMT" zone during GUC initialization.
That's critical for a couple of reasons: since we do not support leap
seconds, we *must not* allow "GMT" to have leap seconds, and since this
case runs before the GUC subsystem is fully alive, we'd really rather
not take the risk of pg_open_tzfile throwing any errors.
However, that still left the code reading TZDEFRULES on every other
call, something we'd noticed to the extent of having added code to cache
the result so it was only done once per process not a lot of times.
Andres Freund complained about the static data space used up for the
cache; but as long as the logic was like this, there was no point in
trying to get rid of that space.
We can improve matters by looking a bit more closely at what the IANA
code actually needs the TZDEFRULES data for. One thing it does is
that if "posixrules" is a leap-second-aware zone, the leap-second
behavior will be absorbed into every POSIX-style zone specification.
However, that's a behavior we'd really prefer to do without, since
for our purposes the end effect is to render every POSIX-style zone
name unsupported. Otherwise, the TZDEFRULES data is used only if
the POSIX zone name specifies DST but doesn't include a transition
date rule (e.g., "EST5EDT" rather than "EST5EDT,M3.2.0,M11.1.0").
That is a minority case for our purposes --- in particular, it
never happens when tzload() invokes tzparse() to interpret a
transition date rule string found in a tzdata zone file.
Hence, if we legislate that we're going to ignore leap-second data
from "posixrules", we can postpone the TZDEFRULES load into the path
where we actually need to substitute for a missing date rule string.
That means it will never happen at all in common scenarios, making it
reasonable to dynamically allocate the cache space when it does happen.
Even when the data is already loaded, this saves some cycles in the
common code path since we avoid a memcpy of 23KB or so. And, IMO at
least, this is a less ugly hack on the IANA logic than what we had
before, since it's not messing with the lastditch-vs-regular code paths.
Back-patch to all supported branches, not so much because this is a
critical change as that I want to keep all our copies of the IANA
timezone code in sync.
projects / postgresql / log