Andres Freund [Tue, 14 May 2019 18:45:40 +0000 (11:45 -0700)]
Add isolation test for INSERT ON CONFLICT speculative insertion failure.
This path previously was not reliably covered. There was some
heuristic coverage via insert-conflict-toast.spec, but that test is
not deterministic, and only tested for a somewhat specific bug.
Backpatch, as this is a complicated and otherwise untested code
path. Unfortunately 9.5 cannot handle two waiting sessions, and thus
cannot execute this test.
Triggered by a conversion with Melanie Plageman.
Author: Andres Freund
Discussion: https://postgr.es/m/CAAKRu_a7hbyrk=wveHYhr4LbcRnRCG=yPUVoQYB9YO1CdUBE9Q@mail.gmail.com
Backpatch: 9.5-
Peter Geoghegan [Mon, 13 May 2019 22:39:01 +0000 (15:39 -0700)]
Doc: Refer to line pointers as item identifiers.
An upcoming HEAD-only patch will standardize the terminology around
ItemIdData variables/line pointers, ending the practice of referring to
them as "item pointers". Make the "Database Page Layout" docs
consistent with the new policy. The term "item identifier" is already
used in the same section, so stick with that.
Discussion: https://postgr.es/m/CAH2-Wz=c=MZQjUzde3o9+2PLAPuHTpVZPPdYxN=E4ndQ2--8ew@mail.gmail.com
Backpatch: All supported branches.
Tom Lane [Mon, 13 May 2019 14:53:19 +0000 (10:53 -0400)]
Fix misuse of an integer as a bool.
pgtls_read_pending is declared to return bool, but what the underlying
SSL_pending function returns is a count of available bytes.
This is actually somewhat harmless if we're using C99 bools, but in
the back branches it's a live bug: if the available-bytes count happened
to be a multiple of 256, it would get converted to a zero char value.
On machines where char is signed, counts of 128 and up could misbehave
as well. The net effect is that when using SSL, libpq might block
waiting for data even though some has already been received.
Broken by careless refactoring in commit 4e86f1b16, so back-patch
to 9.5 where that came in.
Tom Lane [Sun, 12 May 2019 22:53:13 +0000 (18:53 -0400)]
Fix misoptimization of "{1,1}" quantifiers in regular expressions.
A bounded quantifier with m = n = 1 might be thought a no-op. But
according to our documentation (which traces back to Henry Spencer's
original man page) it still imposes greediness, or non-greediness in the
case of the non-greedy variant "{1,1}?", on whatever it's attached to.
This turns out not to work though, because parseqatom() optimizes away
the m = n = 1 case without regard for whether it's supposed to change
the greediness of the argument RE.
We can fix this by just not applying the optimization when the greediness
needs to change; the subsequent general cases handle it fine.
The three cases in which we can still apply the optimization are
(a) no quantifier, or quantifier does not impose a preference;
(b) atom has no greediness property, implying it cannot match a
variable amount of text anyway; or
(c) quantifier's greediness is same as atom's.
Note that in most cases where one of these applies, we'd have exited
earlier in the "not a messy case" fast path. I think it's now only
possible to get to the optimization when the atom involves capturing
parentheses or a non-top-level backref.
Back-patch to all supported branches. I'd ordinarily be hesitant to
put a subtle behavioral change into back branches, but in this case
it's very hard to see a reason why somebody would write "{1,1}?" unless
they're trying to get the documented change-of-greediness behavior.
Noah Misch [Sun, 12 May 2019 17:33:05 +0000 (10:33 -0700)]
Fail pgwin32_message_to_UTF16() for SQL_ASCII messages.
The function had been interpreting SQL_ASCII messages as UTF8, throwing
an error when they were invalid UTF8. The new behavior is consistent
with pg_do_encoding_conversion(). This affects LOG_DESTINATION_STDERR
and LOG_DESTINATION_EVENTLOG, which will send untranslated bytes to
write() and ReportEventA(). On buildfarm member bowerbird, enabling
log_connections caused an error whenever the role name was not valid
UTF8. Back-patch to 9.4 (all supported versions).
Tom Lane [Sun, 12 May 2019 01:27:13 +0000 (21:27 -0400)]
Rearrange pgstat_bestart() to avoid failures within its critical section.
We long ago decided to design the shared PgBackendStatus data structure to
minimize the cost of writing status updates, which means that writers just
have to increment the st_changecount field twice. That isn't hooked into
any sort of resource management mechanism, which means that if something
were to throw error between the two increments, the st_changecount field
would be left odd indefinitely. That would cause readers to lock up.
Now, since it's also a bad idea to leave the field odd for longer than
absolutely necessary (because readers will spin while we have it set),
the expectation was that we'd treat these segments like spinlock critical
sections, with only short, more or less straight-line, code in them.
That was fine as originally designed, but commit 9029f4b37 broke it
by inserting a significant amount of non-straight-line code into
pgstat_bestart(), code that is very capable of throwing errors, not to
mention taking a significant amount of time during which readers will spin.
We have a report from Neeraj Kumar of readers actually locking up, which
I suspect was due to an encoding conversion error in X509_NAME_to_cstring,
though conceivably it was just a garden-variety OOM failure.
Subsequent commits have loaded even more dubious code into pgstat_bestart's
critical section (and commit fc70a4b0d deserves some kind of booby prize
for managing to miss the critical section entirely, although the negative
consequences seem minimal given that the PgBackendStatus entry should be
seen by readers as inactive at that point).
The right way to fix this mess seems to be to compute all these values
into a local copy of the process' PgBackendStatus struct, and then just
copy the data back within the critical section proper. This plan can't
be implemented completely cleanly because of the struct's heavy reliance
on out-of-line strings, which we must initialize separately within the
critical section. But still, the critical section is far smaller and
safer than it was before.
In hopes of forestalling future errors of the same ilk, rename the
macros for st_changecount management to make it more apparent that
the writer-side macros create a critical section. And to prevent
the worst consequences if we nonetheless manage to mess it up anyway,
adjust those macros so that they really are a critical section, ie
they now bump CritSectionCount. That doesn't add much overhead, and
it guarantees that if we do somehow throw an error while the counter
is odd, it will lead to PANIC and a database restart to reset shared
memory.
Back-patch to 9.5 where the problem was introduced.
In HEAD, also fix an oversight in commit b0b39f72b: it failed to teach
pgstat_read_current_status to copy st_gssstatus data from shared memory to
local memory. Hence, subsequent use of that data within the transaction
would potentially see changing data that it shouldn't see.
Noah Misch [Sat, 11 May 2019 07:22:38 +0000 (00:22 -0700)]
Honor TEMP_CONFIG in TAP suites.
The buildfarm client uses TEMP_CONFIG to implement its extra_config
setting. Except for stats_temp_directory, extra_config now applies to
TAP suites; extra_config values seen in the past month are compatible
with this. Back-patch to 9.6, where PostgresNode was introduced, so the
buildfarm can rely on it sooner.
Tom Lane [Fri, 10 May 2019 18:56:41 +0000 (14:56 -0400)]
Cope with EINVAL and EIDRM shmat() failures in PGSharedMemoryAttach.
There's a very old race condition in our code to see whether a pre-existing
shared memory segment is still in use by a conflicting postmaster: it's
possible for the other postmaster to remove the segment in between our
shmctl() and shmat() calls. It's a narrow window, and there's no risk
unless both postmasters are using the same port number, but that's possible
during parallelized "make check" tests. (Note that while the TAP tests
take some pains to choose a randomized port number, pg_regress doesn't.)
If it does happen, we treated that as an unexpected case and errored out.
To fix, allow EINVAL to be treated as segment-not-present, and the same
for EIDRM on Linux. AFAICS, the considerations here are basically
identical to the checks for acceptable shmctl() failures, so I documented
and coded it that way.
While at it, adjust PGSharedMemoryAttach's API to remove its undocumented
dependency on UsedShmemSegAddr in favor of passing the attach address
explicitly. This makes it easier to be sure we're using a null shmaddr
when probing for segment conflicts (thus avoiding questions about what
EINVAL means). I don't think there was a bug there, but it required
fragile assumptions about the state of UsedShmemSegAddr during
PGSharedMemoryIsInUse.
Commit c09850992 may have made this failure more probable by applying
the conflicting-segment tests more often. Hence, back-patch to all
supported branches, as that was.
Tom Lane [Thu, 9 May 2019 20:52:49 +0000 (16:52 -0400)]
Repair issues with faulty generation of merge-append plans.
create_merge_append_plan failed to honor the CP_EXACT_TLIST flag:
it would generate the expected targetlist but then it felt free to
add resjunk sort targets to it. This demonstrably leads to assertion
failures in v11 and HEAD, and it's probably just accidental that we
don't see the same in older branches. I've not looked into whether
there would be any real-world consequences in non-assert builds.
In HEAD, create_append_plan has sprouted the same problem, so fix
that too (although we do not have any test cases that seem able to
reach that bug). This is an oversight in commit 3fc6e2d7f which
invented the CP_EXACT_TLIST flag, so back-patch to 9.6 where that
came in.
convert_subquery_pathkeys would create pathkeys for subquery output
values if they match any EquivalenceClass known in the outer query
and are available in the subquery's syntactic targetlist. However,
the second part of that condition is wrong, because such values might
not appear in the subquery relation's reltarget list, which would
mean that they couldn't be accessed above the level of the subquery
scan. We must check that they appear in the reltarget list, instead.
This can lead to dropping knowledge about the subquery's sort
ordering, but I believe it's okay, because any sort key that the
outer query actually has any interest in would appear in the
reltarget list.
This second issue is of very long standing, but right now there's no
evidence that it causes observable problems before 9.6, so I refrained
from back-patching further than that. We can revisit that choice if
somebody finds a way to make it cause problems in older branches.
(Developing useful test cases for these issues is really problematic;
fixing convert_subquery_pathkeys removes the only known way to exhibit
the create_merge_append_plan bug, and neither of the test cases added
by this patch causes a problem in all branches, even when considering
the issues separately.)
The second issue explains bug #15795 from Suresh Kumar R ("could not
find pathkey item to sort" with nested DISTINCT queries). I stumbled
across the first issue while investigating that.
Michael Paquier [Thu, 9 May 2019 01:29:52 +0000 (10:29 +0900)]
Fix error status of vacuumdb when multiple jobs are used
When running a batch of VACUUM or ANALYZE commands on a given database,
there were cases where it is possible to have vacuumdb not report an
error where it actually should, leading to incorrect status results.
Author: Julien Rouhaud Reviewed-by: Amit Kapila, Michael Paquier
Discussion: https://postgr.es/m/CAOBaU_ZuTwz7CtqLYJ1Ouuh272bTQPLN8b1bAPk0bCBm4PDMTQ@mail.gmail.com
Backpatch-through: 9.5
Fujii Masao [Wed, 8 May 2019 16:35:13 +0000 (01:35 +0900)]
Fix documentation for the privileges required for replication functions.
Previously it's documented that use of replication functions is
restricted to superusers. This is true for the functions which
use replication origin, but not for pg_logicl_emit_message() and
functions which use replication slot. For example, not only
superusers but also users with REPLICATION privilege is allowed
to use the functions for replication slot. This commit fixes
the documentation for the privileges required for those replication
functions.
Thomas Munro [Mon, 6 May 2019 03:02:41 +0000 (15:02 +1200)]
Probe only 127.0.0.1 when looking for ports on Unix.
Commit c0985099, later adjusted by commit 4ab02e81, probed 0.0.0.0
in addition to 127.0.0.1, for the benefit of Windows build farm
animals. It isn't really useful on Unix systems, and turned out to
be a bit inconvenient to users of some corporate firewall software.
Switch back to probing just 127.0.0.1 on non-Windows systems.
Michael Paquier [Tue, 7 May 2019 05:20:08 +0000 (14:20 +0900)]
Remove some code related to 7.3 and older servers from tools of src/bin/
This code was broken as of 582edc3, and is most likely not used anymore.
Note that pg_dump supports servers down to 8.0, and psql has code to
support servers down to 7.4.
Author: Julien Rouhaud Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAOBaU_Y5y=zo3+2gf+2NJC1pvMYPcbRXoQaPXx=U7+C8Qh4CzQ@mail.gmail.com
Dean Rasheed [Mon, 6 May 2019 11:00:00 +0000 (12:00 +0100)]
Use checkAsUser for selectivity estimator checks, if it's set.
In examine_variable() and examine_simple_variable(), when checking the
user's table and column privileges to determine whether to grant
access to the pg_statistic data, use checkAsUser for the privilege
checks, if it's set. This will be the case if we're accessing the
table via a view, to indicate that we should perform privilege checks
as the view owner rather than the current user.
This change makes this planner check consistent with the check in the
executor, so the planner will be able to make use of statistics if the
table is accessible via the view. This fixes a performance regression
introduced by commit e2d4ef8de8, which affects queries against
non-security barrier views in the case where the user doesn't have
privileges on the underlying table, but the view owner does.
Note that it continues to provide the same safeguards controlling
access to pg_statistic for direct table access (in which case
checkAsUser won't be set) and for security barrier views, because of
the nearby checks on rte->security_barrier and rte->securityQuals.
Back-patch to all supported branches because e2d4ef8de8 was.
Dean Rasheed, reviewed by Jonathan Katz and Stephen Frost.
Dean Rasheed [Mon, 6 May 2019 10:45:01 +0000 (11:45 +0100)]
Fix security checks for selectivity estimation functions with RLS.
In commit e2d4ef8de8, security checks were added to prevent
user-supplied operators from running over data from pg_statistic
unless the user has table or column privileges on the table, or the
operator is leakproof. For a table with RLS, however, checking for
table or column privileges is insufficient, since that does not
guarantee that the user has permission to view all of the column's
data.
Fix this by also checking for securityQuals on the RTE, and insisting
that the operator be leakproof if there are any. Thus the
leakproofness check will only be skipped if there are no securityQuals
and the user has table or column privileges on the table -- i.e., only
if we know that the user has access to all the data in the column.
Back-patch to 9.5 where RLS was added.
Dean Rasheed, reviewed by Jonathan Katz and Stephen Frost.
Andres Freund [Mon, 6 May 2019 06:31:58 +0000 (23:31 -0700)]
Remove reindex_catalog test from test schedules.
As the test currently causes occasional deadlocks (due to the schema
cleanup from previous sessions potentially still running), and the
patch from f912d7dec2 has gotten a fair bit of buildfarm coverage,
remove the test from the test schedules. There's a set of minor
releases coming up.
Leave the tests in place, so it can manually be run using EXTRA_TESTS.
For now also leave it in master, as there's no imminent release, and
there's plenty (re-)index related work in 12. But we'll have to
disable it before long there too, unless somebody comes up with simple
enough fixes for the deadlock (I'm about to post a vague idea to the
list).
Discussion: https://postgr.es/m/4622.1556982247@sss.pgh.pa.us
Backpatch: 9.4-11 (no master!)
Tom Lane [Thu, 2 May 2019 23:11:28 +0000 (19:11 -0400)]
Fix reindexing of pg_class indexes some more.
Commits 3dbb317d3 et al failed under CLOBBER_CACHE_ALWAYS testing.
Investigation showed that to reindex pg_class_oid_index, we must
suppress accesses to the index (via SetReindexProcessing) before we call
RelationSetNewRelfilenode, or at least before we do CommandCounterIncrement
therein; otherwise, relcache reloads happening within the CCI may try to
fetch pg_class rows using the index's new relfilenode value, which is as
yet an empty file.
Of course, the point of 3dbb317d3 was that that ordering didn't work
either, because then RelationSetNewRelfilenode's own update of the index's
pg_class row cannot access the index, should it need to.
There are various ways we might have got around that, but Andres Freund
came up with a brilliant solution: for a mapped index, we can really just
skip the pg_class update altogether. The only fields it was actually
changing were relpages etc, but it was just setting them to zeroes which
is useless make-work. (Correct new values will be installed at the end
of index build.) All pg_class indexes are mapped and probably always will
be, so this eliminates the problem by removing work rather than adding it,
always a pleasant outcome. Having taught RelationSetNewRelfilenode to do
it that way, we can revert the code reordering in reindex_index. (But
I left the moved setup code where it was; there seems no reason why it
has to run without use of the old index. If you're trying to fix a
busted pg_class index, you'll have had to disable system index use
altogether to get this far.)
Moreover, this means we don't need RelationSetIndexList at all, because
reindex_relation's hacking to make "REINDEX TABLE pg_class" work is
likewise now unnecessary. We'll leave that code in place in the back
branches, but a follow-on patch will remove it in HEAD.
In passing, do some minor cleanup for commit 5c1560606 (in HEAD only),
notably removing a duplicate newrnode assignment.
Patch by me, using a core idea due to Andres Freund. Back-patch to all
supported branches, as 3dbb317d3 was.
Andres Freund [Wed, 1 May 2019 00:45:32 +0000 (17:45 -0700)]
Run catalog reindexing test from 3dbb317d32 serially, to avoid deadlocks.
The tests turn out to cause deadlocks in some circumstances. Fairly
reproducibly so with -DRELCACHE_FORCE_RELEASE
-DCATCACHE_FORCE_RELEASE. Some of the deadlocks may be hard to fix
without disproportionate measures, but others probably should be fixed
- but not in 12.
We discussed removing the new tests until we can fix the issues
underlying the deadlocks, but results from buildfarm animal
markhor (which runs with CLOBBER_CACHE_ALWAYS) indicates that there
might be a more severe, as of yet undiagnosed, issue (including on
stable branches) with reindexing catalogs. The failure is:
ERROR: could not read block 0 in file "base/16384/28025": read only 0 of 8192 bytes
Therefore it seems advisable to keep the tests.
It's not certain that running the tests in isolation removes the risk
of deadlocks. It's possible that additional locks are needed to
protect against a concurrent auto-analyze or such.
Per discussion with Tom Lane.
Discussion: https://postgr.es/m/28926.1556664156@sss.pgh.pa.us
Backpatch: 9.4-, like 3dbb317d3
Andres Freund [Tue, 30 Apr 2019 02:39:36 +0000 (19:39 -0700)]
Fix potential assertion failure when reindexing a pg_class index.
When reindexing individual indexes on pg_class it was possible to
either trigger an assertion failure:
TRAP: FailedAssertion("!(!ReindexIsProcessingIndex(((index)->rd_id)))
That's because reindex_index() called SetReindexProcessing() - which
enables an asserts ensuring no index insertions happen into the index
- before calling RelationSetNewRelfilenode(). That not correct for
indexes on pg_class, because RelationSetNewRelfilenode() updates the
relevant pg_class row, which needs to update the indexes.
The are two reasons this wasn't noticed earlier. Firstly the bug
doesn't trigger when reindexing all of pg_class, as reindex_relation
has code "hiding" all yet-to-be-reindexed indexes. Secondly, the bug
only triggers when the the update to pg_class doesn't turn out to be a
HOT update - otherwise there's no index insertion to trigger the
bug. Most of the time there's enough space, making this bug hard to
trigger.
To fix, move RelationSetNewRelfilenode() to before the
SetReindexProcessing() (and, together with some other code, to outside
of the PG_TRY()).
To make sure the error checking intended by SetReindexProcessing() is
more robust, modify CatalogIndexInsert() to check
ReindexIsProcessingIndex() even when the update is a HOT update.
Also add a few regression tests for REINDEXing of system catalogs.
The last two improvements would have prevented some of the issues
fixed in 5c1560606dc4c from being introduced in the first place.
Reported-By: Michael Paquier Diagnosed-By: Tom Lane and Andres Freund
Author: Andres Freund Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20190418011430.GA19133@paquier.xyz
Backpatch: 9.4-, the bug is present in all branches
Tom Lane [Fri, 26 Apr 2019 23:46:26 +0000 (19:46 -0400)]
Sync our copy of the timezone library with IANA release tzcode2019a.
This corrects a small bug in zic that caused it to output an incorrect
year-2440 transition in the Africa/Casablanca zone.
More interestingly, zic has grown a "-r" option that limits the range of
zone transitions that it will put into the output files. That might be
useful to people who don't like the weird GMT offsets that tzdb likes
to use for very old dates. It appears that for dates before the cutoff
time specified with -r, zic will use the zone's standard-time offset
as of the cutoff time. So for example one might do
to cause all dates before 1910-01-01 to be treated as though 1910
standard time prevailed indefinitely far back. (Don't blame me for
the unfriendly way of specifying the cutoff time --- it's seconds
since or before the Unix epoch. You can use extract(epoch ...)
to calculate it.)
Tom Lane [Fri, 26 Apr 2019 21:56:26 +0000 (17:56 -0400)]
Update time zone data files to tzdata release 2019a.
DST law changes in Palestine and Metlakatla.
Historical corrections for Israel.
Etc/UCT is now a backward-compatibility link to Etc/UTC, instead
of being a separate zone that generates the abbreviation "UCT",
which nowadays is typically a typo. Postgres will still accept
"UCT" as an input zone name, but it won't output it.
Tom Lane [Wed, 24 Apr 2019 18:15:45 +0000 (14:15 -0400)]
Fix some minor postmaster-state-machine issues.
In sigusr1_handler, don't ignore PMSIGNAL_ADVANCE_STATE_MACHINE based
on pmState. The restriction is unnecessary (PostmasterStateMachine
should work in any state), not future-proof (since it makes too many
assumptions about why the signal might be sent), and broken even today
because a race condition can make it necessary to respond to the signal
in PM_WAIT_READONLY state. The race condition seems unlikely, but
if it did happen, a hot-standby postmaster could fail to shut down
after receiving a smart-shutdown request.
In MaybeStartWalReceiver, don't clear the WalReceiverRequested flag
if the fork attempt fails. Leaving it set allows us to try
again in future iterations of the postmaster idle loop. (The startup
process would eventually send a fresh request signal, but this change
may allow us to retry the fork sooner.)
Remove an obsolete comment and unnecessary test in
PostmasterStateMachine's handling of PM_SHUTDOWN_2 state. It's not
possible to have a live walreceiver in that state, and AFAICT has not
been possible since commit 5e85315ea. This isn't a live bug, but the
false comment is quite confusing to readers.
In passing, rearrange sigusr1_handler's CheckPromoteSignal tests so that
we don't uselessly perform stat() calls that we're going to ignore the
results of.
Add some comments clarifying the behavior of MaybeStartWalReceiver;
I very nearly rearranged it in a way that'd reintroduce the race
condition fixed in e5d494d78. Mea culpa for not commenting that
properly at the time.
Back-patch to all supported branches. The PMSIGNAL_ADVANCE_STATE_MACHINE
change is the only one of even minor significance, but we might as well
keep this code in sync across branches.
Michael Paquier [Wed, 24 Apr 2019 00:05:25 +0000 (09:05 +0900)]
Fix detection of passwords hashed with MD5
This commit fixes an issue related to the way password verifiers hashed
with MD5 are detected, leading to possibly detect that plain passwords
are legit MD5 hashes. A MD5-hashed entry was checked based on if its
header uses "md5" and if the string length matches what is expected.
Unfortunately the code never checked if the hash only used hexadecimal
characters after the three-character prefix.
Fix 9.6 down to 9.4, where this code is present. This area of the code
has changed in 10 and upwards with the introduction of SCRAM, which led
to a different fix committed as of ccae190.
Reported-by: Tom Lane
Author: Michael Paquier Reviewed-by: Jonathan Katz
Discussion: https://postgr.es/m/016deb6b-1f0a-8e9f-1833-a8675b170aa9@postgresql.org
Backpatch-through: 9.4
Tom Lane [Tue, 23 Apr 2019 22:51:31 +0000 (18:51 -0400)]
Repair assorted issues in locale data extraction.
cache_locale_time (extraction of LC_TIME-related info) had never been
taught the lessons we previously learned about extraction of info related
to LC_MONETARY and LC_NUMERIC. Specifically, commit 95a777c61 taught
PGLC_localeconv() that data coming out of localeconv() was in an encoding
determined by the relevant locale, but we didn't realize that there's a
similar issue with strftime(). And commit a4930e7ca hardened
PGLC_localeconv() against errors occurring partway through, but failed
to do likewise for cache_locale_time(). So, rearrange the latter
function to perform encoding conversion and not risk failure while
it's got the locales set to temporary values.
This time around I also changed PGLC_localeconv() to treat it as FATAL
if it can't restore the previous settings of the locale values. There
is no reason (except possibly OOM) for that to fail, and proceeding with
the wrong locale values seems like a seriously bad idea --- especially
on Windows where we have to also temporarily change LC_CTYPE. Also,
protect against the possibility that we can't identify the codeset
reported for LC_MONETARY or LC_NUMERIC; rather than just failing,
try to validate the data without conversion.
The user-visible symptom this fixes is that if LC_TIME is set to a locale
name that implies an encoding different from the database encoding,
non-ASCII localized day and month names would be retrieved in the wrong
encoding, leading to either unexpected encoding-conversion error reports
or wrong output from to_char(). The other possible failure modes are
unlikely enough that we've not seen reports of them, AFAIK.
The encoding conversion problems do not manifest on Windows, since
we'd already created special-case code to handle that issue there.
Per report from Juan José Santamaría Flecha. Back-patch to all
supported versions.
Fix documentation of pg_start_backup and pg_stop_backup functions.
This commit adds the description that "non-exclusive" pg_start_backup
and pg_stop_backup can be executed even during recovery. Previously
it was wrongly documented that those functions are not allowed to be
executed during recovery.
Back-patch to 9.6 where non-exclusive backup API was added.
Bruce Momjian [Wed, 17 Apr 2019 22:12:10 +0000 (18:12 -0400)]
postgresql.conf.sample: add proper defaults for include actions
Previously, include actions include_dir, include_if_exists, and include
listed commented-out values which were not the defaults, which is
inconsistent with other entries. Instead, replace them with '', which
is the default value.
Bruce Momjian [Wed, 17 Apr 2019 22:01:02 +0000 (18:01 -0400)]
docs: clarify pg_upgrade's recovery behavior
The previous paragraph trying to explain --check, --link, and no --link
modes and the various points of failure was too complex. Instead, use
bullet lists and sublists.
Reported-by: Daniel Gustafsson
Discussion: https://postgr.es/m/qtqiv7hI87s_Xvz5ZXHCaH-1-_AZGpIDJowzlRjF3-AbCr3RhSNydM_JCuJ8DE4WZozrtxhIWmyYTbv0syKyfGB6cYMQitp9yN-NZMm-oAo=@yesql.se
Test both 0.0.0.0 and 127.0.0.x addresses to find a usable port.
Commit c098509927f9a49ebceb301a2cb6a477ecd4ac3c changed
PostgresNode::get_new_node() to probe 0.0.0.0 instead of 127.0.0.1, but
the new test was less effective for Windows native Perl. This increased
the failure rate of buildfarm members bowerbird and jacana. Instead,
test 0.0.0.0 and concrete addresses. This restores the old level of
defense, but the algorithm is still subject to its longstanding time of
check to time of use race condition. Back-patch to 9.6, like the
previous change.
Commit 947a35014fdc2ec74cbf06c7dbac6eea6fae90c6 relied on a feature
available in v11 and later, so back-patching it to v10 and v9.6 was
invalid. In those branches, revert it and skip the test on msys.
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer stop if shmat() of an old segment fails with EACCES. A
postmaster will no longer recycle segments pertaining to other data
directories. That's good for production, but it's bad for integration
tests that crash a postmaster and immediately delete its data directory.
Such a test now leaks a segment indefinitely. No "make check-world"
test does that. win32_shmem.c already avoided all these problems. In
9.6 and later, enhance PostgresNode to facilitate testing. Back-patch
to 9.4 (all supported versions).
Reviewed (in earlier versions) by Daniel Gustafsson and Kyotaro HORIGUCHI.
Tom Lane [Wed, 10 Apr 2019 23:02:21 +0000 (19:02 -0400)]
Fix backwards test in operator_precedence_warning logic.
Warnings about unary minus might have been wrong. It's a bit
surprising that nobody noticed yet ... probably the precedence-warning
feature hasn't really been used much in the field.
Amit Kapila [Wed, 10 Apr 2019 03:30:09 +0000 (09:00 +0530)]
Avoid counting transaction stats for parallel worker cooperating
transaction.
The transaction that is initiated by the parallel worker to cooperate
with the actual transaction started by the main backend to complete the
query execution should not be counted as a separate transaction. The
other internal transactions started and committed by the parallel worker
are still counted as separate transactions as we that is what we do in
other places like autovacuum.
This will partially fix the bloat in transaction stats due to additional
transactions performed by parallel workers. For a complete fix, we need to
decide how we want to show all the transactions that are started internally
for various operations and that is a matter of separate patch.
Reported-by: Haribabu Kommi
Author: Haribabu Kommi Reviewed-by: Amit Kapila, Jamison Kirk and Rahila Syed
Backpatch-through: 9.6
Discussion: https://postgr.es/m/CAJrrPGc9=jKXuScvNyQ+VNhO0FZk7LLAShAJRyZjnedd2D61EQ@mail.gmail.com
Avoid "could not reattach" by providing space for concurrent allocation.
We've long had reports of intermittent "could not reattach to shared
memory" errors on Windows. Buildfarm member dory fails that way when
PGSharedMemoryReAttach() execution overlaps with creation of a thread
for the process's "default thread pool". Fix that by providing a second
region to receive asynchronous allocations that would otherwise intrude
into UsedShmemSegAddr. In pgwin32_ReserveSharedMemoryRegion(), stop
trying to free reservations landing at incorrect addresses; the caller's
next step has been to terminate the affected process. Back-patch to 9.4
(all supported versions).
Tom Lane [Mon, 8 Apr 2019 20:09:07 +0000 (16:09 -0400)]
Fix improper interaction of FULL JOINs with lateral references.
join_is_legal() needs to reject forming certain outer joins in cases
where that would lead the planner down a blind alley. However, it
mistakenly supposed that the way to handle full joins was to treat them
as applying the same constraints as for left joins, only to both sides.
That doesn't work, as shown in bug #15741 from Anthony Skorski: given
a lateral reference out of a join that's fully enclosed by a full join,
the code would fail to believe that any join ordering is legal, resulting
in errors like "failed to build any N-way joins".
However, we don't really need to consider full joins at all for this
purpose, because we effectively force them to be evaluated in syntactic
order, and that order is always legal for lateral references. Hence,
get rid of this broken logic for full joins and just ignore them instead.
This seems to have been an oversight in commit 7e19db0c0.
Back-patch to all supported branches, as that was.
Michael Paquier [Fri, 5 Apr 2019 01:38:41 +0000 (10:38 +0900)]
Fix some documentation in pg_rewind
A confusion which comes a lot from users is that it is necessary to
issue a checkpoint on a freshly-promoted standby so as its control file
has up-to-date timeline information which is used by pg_rewind to
validate the operation. Let's document that properly. This is
back-patched down to 9.5 where pg_rewind has been introduced.
Author: Michael Paquier Reviewed-by: Magnus Hagander
Discussion: https://postgr.es/m/CABUevEz5bpvbwVsYCaSMV80CBZ5-82nkMzbb+Bu=h1m=rLdn=g@mail.gmail.com
Backpatch-through: 9.5
Make src/test/recovery/t/017_shm.pl safe for concurrent execution.
Buildfarm members idiacanthus and komodoensis, which share a host, both
executed this test in the same second. That failed. Back-patch to 9.6,
where the test first appeared.
Handle USE_MODULE_DB for all tests able to use an installed postmaster.
When $(MODULES) and $(MODULE_big) are empty, derive the database name
from the first element of $(REGRESS) instead of using a constant string.
When deriving the database name from $(MODULES), use its first element
instead of the entire list; the earlier approach would fail if any
multi-module directory had $(REGRESS) tests. Treat isolation suites and
src/pl correspondingly. Under USE_MODULE_DB=1, installcheck-world and
check-world no longer reuse any database name in a given postmaster.
Buildfarm members axolotl, mandrill and frogfish saw spurious "is being
accessed by other users" failures that would not have happened without
database name reuse. (The CountOtherDBBackends() 5s deadline expired
during DROP DATABASE; a backend for an earlier test suite had used the
same database name and had not yet exited.) Back-patch to 9.4 (all
supported versions), except bits pertaining to isolation suites.
Concept reviewed by Andrew Dunstan, Andres Freund and Tom Lane.
postmaster startup scrutinizes any shared memory segment recorded in
postmaster.pid, exiting if that segment matches the current data
directory and has an attached process. When the postmaster.pid file was
missing, a starting postmaster used weaker checks. Change to use the
same checks in both scenarios. This increases the chance of a startup
failure, in lieu of data corruption, if the DBA does "kill -9 `head -n1
postmaster.pid` && rm postmaster.pid && pg_ctl -w start". A postmaster
will no longer recycle segments pertaining to other data directories.
That's good for production, but it's bad for integration tests that
crash a postmaster and immediately delete its data directory. Such a
test now leaks a segment indefinitely. No "make check-world" test does
that. win32_shmem.c already avoided all these problems. In 9.6 and
later, enhance PostgresNode to facilitate testing. Back-patch to 9.4
(all supported versions).
Reviewed by Daniel Gustafsson and Kyotaro HORIGUCHI.
Dean Rasheed [Tue, 2 Apr 2019 07:20:55 +0000 (08:20 +0100)]
Perform RLS subquery checks as the right user when going via a view.
When accessing a table with RLS via a view, the RLS checks are
performed as the view owner. However, the code neglected to propagate
that to any subqueries in the RLS checks. Fix that by calling
setRuleCheckAsUser() for all RLS policy quals and withCheckOption
checks for RTEs with RLS.
One should almost always terminate an old process, not use a manual
removal tool like ipcrm. Removal of the ipcclean script eleven years
ago (39627b1ae680cba44f6e56ca5facec4fdbfe9495) and its non-replacement
corroborate that manual shm removal is now a niche goal. Back-patch to
9.4 (all supported versions).
Reviewed by Daniel Gustafsson and Kyotaro HORIGUCHI.
Tomas Vondra [Wed, 27 Mar 2019 01:39:39 +0000 (02:39 +0100)]
Track unowned relations in doubly-linked list
Relations dropped in a single transaction are tracked in a list of
unowned relations. With large number of dropped relations this resulted
in poor performance at the end of a transaction, when the relations are
removed from the singly linked list one by one.
Commit b4166911 attempted to address this issue (particularly when it
happens during recovery) by removing the relations in a reverse order,
resulting in O(1) lookups in the list of unowned relations. This did
not work reliably, though, and it was possible to trigger the O(N^2)
behavior in various ways.
Instead of trying to remove the relations in a specific order with
respect to the linked list, which seems rather fragile, switch to a
regular doubly linked. That allows us to remove relations cheaply no
matter where in the list they are.
As b4166911 was a bugfix, backpatched to all supported versions, do the
same thing here.
Tom Lane [Sun, 24 Mar 2019 19:13:21 +0000 (15:13 -0400)]
Avoid double-free in vacuumlo error path.
The code would do "PQclear(res)" twice if lo_unlink failed, evidently
due to careless thinking about how far out a "break" would break.
Remove the extra PQclear and adjust the loop logic so that we'll fall
out of both levels of loop after an error, as was clearly the intent.
Spotted by Coverity. I have no idea why it took this long to notice,
since the bug has been there since commit 67ccbb080. Accordingly,
back-patch to all supported branches.
Fix WAL format incompatibility introduced by backpatching of 52ac6cd2d0
52ac6cd2d0 added new field to ginxlogDeletePage and was backpatched to 9.4.
That led to problems when patched postgres instance applies WAL records
generated by non-patched one. WAL records generated by non-patched instance
don't contain new field, which patched one is expecting to see.
Thankfully, we can distinguish patched and non-patched WAL records by their data
size. If we see that WAL record is generated by non-patched instance, we skip
processing of new field. This commit comes with some assertions. In
particular, if it appears that on some platform struct data size didn't change
then static assertion will trigger.
Reported-by: Simon Riggs
Discussion: https://postgr.es/m/CANP8%2Bj%2BK4whxf7ET7%2BgO%2BG-baC3-WxqqH%3DnV4X2CgfEPA3Yu3g%40mail.gmail.com
Author: Alexander Korotkov Reviewed-by: Simon Riggs, Alvaro Herrera
Backpatch-through: 9.4
Tom Lane [Sat, 23 Mar 2019 20:24:30 +0000 (16:24 -0400)]
Accept XML documents when xmloption = content, as required by SQL:2006+.
Previously we were using the SQL:2003 definition, which doesn't allow
this, but that creates a serious dump/restore gotcha: there is no
setting of xmloption that will allow all valid XML data. Hence,
switch to the 2006 definition.
Since libxml doesn't accept <!DOCTYPE> directives in the mode we
use for CONTENT parsing, the implementation is to detect <!DOCTYPE>
in the input and switch to DOCUMENT parsing mode. This should not
cost much, because <!DOCTYPE> should be close to the front of the
input if it's there at all. It's possible that this causes the
error messages for malformed input to be slightly different than
they were before, if said input includes <!DOCTYPE>; but that does
not seem like a big problem.
In passing, buy back a few cycles in parsing of large XML documents
by not doing strlen() of the whole input in parse_xml_decl().
Back-patch because dump/restore failures are not nice. This change
shouldn't break any cases that worked before, so it seems safe to
back-patch.
Tom Lane [Tue, 19 Mar 2019 16:49:27 +0000 (12:49 -0400)]
Make checkpoint requests more robust.
Commit 6f6a6d8b1 introduced a delay of up to 2 seconds if we're trying
to request a checkpoint but the checkpointer hasn't started yet (or,
much less likely, our kill() call fails). However buildfarm experience
shows that that's not quite enough for slow or heavily-loaded machines.
There's no good reason to assume that the checkpointer won't start
eventually, so we may as well make the timeout much longer, say 60 sec.
However, if the caller didn't say CHECKPOINT_WAIT, it seems like a bad
idea to be waiting at all, much less for as long as 60 sec. We can
remove the need for that, and make this whole thing more robust, by
adjusting the code so that the existence of a pending checkpoint
request is clear from the contents of shared memory, and making sure
that the checkpointer process will notice it at startup even if it did
not get a signal. In this way there's no need for a non-CHECKPOINT_WAIT
call to wait at all; if it can't send the signal, it can nonetheless
assume that the checkpointer will eventually service the request.
A potential downside of this change is that "kill -INT" on the checkpointer
process is no longer enough to trigger a checkpoint, should anyone be
relying on something so hacky. But there's no obvious reason to do it
like that rather than issuing a plain old CHECKPOINT command, so we'll
assume that nobody is. There doesn't seem to be a way to preserve this
undocumented quasi-feature without introducing race conditions.
Since a principal reason for messing with this is to prevent intermittent
buildfarm failures, back-patch to all supported branches.
Peter Eisentraut [Thu, 14 Mar 2019 07:25:25 +0000 (08:25 +0100)]
Fix volatile vs. pointer confusion
Variables used after a longjmp() need to be declared volatile. In
case of a pointer, it's the pointer itself that needs to be declared
volatile, not the pointed-to value. So we need
Tom Lane [Thu, 14 Mar 2019 16:16:09 +0000 (12:16 -0400)]
Ensure dummy paths have correct required_outer if rel is parameterized.
The assertions added by commits 34ea1ab7f et al found another problem:
set_dummy_rel_pathlist and mark_dummy_rel were failing to label
the dummy paths they create with the correct outer_relids, in case
the relation is necessarily parameterized due to having lateral
references in its tlist. It's likely that this has no user-visible
consequences in production builds, at the moment; but still an assertion
failure is a bad thing, so back-patch the fix.
Per bug #15694 from Roman Zharkov (via Alexander Lakhin)
and an independent report by Tushar Ahuja.
Tom Lane [Sun, 10 Mar 2019 16:58:52 +0000 (12:58 -0400)]
Disallow NaN as a value for floating-point GUCs.
None of the code that uses GUC values is really prepared for them to
hold NaN, but parse_real() didn't have any defense against accepting
such a value. Treat it the same as a syntax error.
I haven't attempted to analyze the exact consequences of setting any
of the float GUCs to NaN, but since they're quite unlikely to be good,
this seems like a back-patchable bug fix.
Note: we don't need an explicit test for +-Infinity because those will
be rejected by existing range checks. I added a regression test for
that in HEAD, but not older branches because the spelling of the value
in the error message will be platform-dependent in branches where we
don't always use port/snprintf.c.
Michael Paquier [Fri, 8 Mar 2019 06:10:44 +0000 (15:10 +0900)]
Fix function signatures of pageinspect in documentation
tuple_data_split() lacked the type of the first argument, and
heap_page_item_attrs() has reversed the first and second argument,
with the bytea argument using an incorrect name.
Michael Paquier [Mon, 4 Mar 2019 00:50:14 +0000 (09:50 +0900)]
Fix error handling of readdir() port implementation on first file lookup
The implementation of readdir() in src/port/ which gets used by MSVC has
been added in 399a36a, and since the beginning it considers all errors
on the first file lookup as ENOENT, setting errno accordingly and
letting the routine caller think that the directory is empty. While
this is normally enough for the case of the backend, this can confuse
callers of this routine on Windows as all errors would map to the same
behavior. So, for example, even permission errors would be thought as
having an empty directory, while there could be contents in it.
This commit changes the error handling so as readdir() gets a behavior
similar to native implementations: force errno=0 when seeing
ERROR_FILE_NOT_FOUND as error and consider other errors as plain
failures.
While looking at the patch, I noticed that MinGW does not enforce
errno=0 when looking at the first file, but it gets enforced on the next
file lookups. A comment related to that was incorrect in the code.
Reported-by: Yuri Kurenkov Diagnosed-by: Yuri Kurenkov, Grigory Smolkin
Author: Konstantin Knizhnik Reviewed-by: Andrew Dunstan, Michael Paquier
Discussion: https://postgr.es/m/2cad7829-8d66-e39c-b937-ac825db5203d@postgrespro.ru
Backpatch-through: 9.4
Dean Rasheed [Sun, 3 Mar 2019 10:56:05 +0000 (10:56 +0000)]
Further fixing for multi-row VALUES lists for updatable views.
Previously, rewriteTargetListIU() generated a list of attribute
numbers from the targetlist, which were passed to rewriteValuesRTE(),
which expected them to contain the same number of entries as there are
columns in the VALUES RTE, and to be in the same order. That was fine
when the target relation was a table, but for an updatable view it
could be broken in at least three different ways ---
rewriteTargetListIU() could insert additional targetlist entries for
view columns with defaults, the view columns could be in a different
order from the columns of the underlying base relation, and targetlist
entries could be merged together when assigning to elements of an
array or composite type. As a result, when recursing to the base
relation, the list of attribute numbers generated from the rewritten
targetlist could no longer be relied upon to match the columns of the
VALUES RTE. We got away with that prior to 41531e42d3 because it used
to always be the case that rewriteValuesRTE() did nothing for the
underlying base relation, since all DEFAULTS had already been replaced
when it was initially invoked for the view, but that was incorrect
because it failed to apply defaults from the base relation.
Fix this by examining the targetlist entries more carefully and
picking out just those that are simple Vars referencing the VALUES
RTE. That's sufficient for the purposes of rewriteValuesRTE(), which
is only responsible for dealing with DEFAULT items in the VALUES
RTE. Any DEFAULT item in the VALUES RTE that doesn't have a matching
simple-Var-assignment in the targetlist is an error which we complain
about, but in theory that ought to be impossible.
Additionally, move this code into rewriteValuesRTE() to give a clearer
separation of concerns between the 2 functions. There is no need for
rewriteTargetListIU() to know about the details of the VALUES RTE.
While at it, fix the comment for rewriteValuesRTE() which claimed that
it doesn't support array element and field assignments --- that hasn't
been true since a3c7a993d5 (9.6 and later).
Back-patch to all supported versions, with minor differences for the
pre-9.6 branches, which don't support array element and field
assignments to the same column in multi-row VALUES lists.
Tom Lane [Sun, 24 Feb 2019 17:51:50 +0000 (12:51 -0500)]
Fix ecpg bugs caused by missing semicolons in the backend grammar.
The Bison documentation clearly states that a semicolon is required
after every grammar rule, and our scripts that generate ecpg's
grammar from the backend's implicitly assumed this is true. But it
turns out that only ancient versions of Bison actually enforce that.
There have been a couple of rules without trailing semicolons in
gram.y for some time, and as a consequence, ecpg's grammar was faulty
and produced wrong output for the affected statements.
To fix, add the missing semis, and add some cross-checks to ecpg's
scripts so that they'll bleat if we mess this up again.
The cases that were broken were:
* "SET variable = DEFAULT" (but not "SET variable TO DEFAULT"),
as well as allied syntaxes such as ALTER SYSTEM SET ... DEFAULT.
These produced syntactically invalid output that the server
would reject.
* Multiple type names in DROP TYPE/DOMAIN commands. Only the
first type name would be listed in the emitted command.
Per report from Daisuke Higuchi. Back-patch to all supported versions.
Thomas Munro [Sun, 24 Feb 2019 10:59:26 +0000 (23:59 +1300)]
Tolerate EINVAL when calling fsync() on a directory.
Previously, we tolerated EBADF as a way for the operating system to
indicate that it doesn't support fsync() on a directory. Tolerate
EINVAL too, for older versions of Linux CIFS.
Bug #15636. Back-patch all the way.
Reported-by: John Klann
Discussion: https://postgr.es/m/15636-d380890dafd78fc6@postgresql.org
Thomas Munro [Sun, 24 Feb 2019 00:38:15 +0000 (13:38 +1300)]
Tolerate ENOSYS failure from sync_file_range().
One unintended consequence of commit 9ccdd7f6 was that Windows WSL
users started getting a panic whenever we tried to initiate data
flushing with sync_file_range(), because WSL does not implement that
system call. Previously, they got a stream of periodic warnings,
which was also undesirable but at least ignorable.
Prevent the panic by handling ENOSYS specially and skipping the panic
promotion with data_sync_elevel(). Also suppress future attempts
after the first such failure so that the pre-existing problem of
noisy warnings is improved.
Back-patch to 9.6 (older branches were not affected in this way by 9ccdd7f6).
Author: Thomas Munro and James Sewell Tested-by: James Sewell Reported-by: Bruce Klein
Discussion: https://postgr.es/m/CA+mCpegfOUph2U4ZADtQT16dfbkjjYNJL1bSTWErsazaFjQW9A@mail.gmail.com
Tom Lane [Fri, 22 Feb 2019 17:23:00 +0000 (12:23 -0500)]
Fix plan created for inherited UPDATE/DELETE with all tables excluded.
In the case where inheritance_planner() finds that every table has
been excluded by constraints, it thought it could get away with
making a plan consisting of just a dummy Result node. While certainly
there's no updating or deleting to be done, this had two user-visible
problems: the plan did not report the correct set of output columns
when a RETURNING clause was present, and if there were any
statement-level triggers that should be fired, it didn't fire them.
Hence, rather than only generating the dummy Result, we need to
stick a valid ModifyTable node on top, which requires a tad more
effort here.
It's been broken this way for as long as inheritance_planner() has
known about deleting excluded subplans at all (cf commit 635d42e9c),
so back-patch to all supported branches.
Amit Langote and Tom Lane, per a report from Petr Fedorov.
Tom Lane [Thu, 21 Feb 2019 01:53:08 +0000 (20:53 -0500)]
Speed up match_eclasses_to_foreign_key_col() when there are many ECs.
Check ec_relids before bothering to iterate through the EC members.
On a perhaps extreme, but still real-world, query in which
match_eclasses_to_foreign_key_col() accounts for the bulk of the
planner's runtime, this saves nearly 40% of the runtime. It's a bit
of a stopgap fix, but it's simple enough to be back-patched to 9.6
where this code came in; so let's do that.
Dean Rasheed [Wed, 20 Feb 2019 08:25:24 +0000 (08:25 +0000)]
Fix DEFAULT-handling in multi-row VALUES lists for updatable views.
INSERT ... VALUES for a single VALUES row is implemented differently
from a multi-row VALUES list, which causes inconsistent behaviour in
the way that DEFAULT items are handled. In particular, when inserting
into an auto-updatable view on top of a table with a column default, a
DEFAULT item in a single VALUES row gets correctly replaced with the
table column's default, but for a multi-row VALUES list it is replaced
with NULL.
Fix this by allowing rewriteValuesRTE() to leave DEFAULT items in the
VALUES list untouched if the target relation is an auto-updatable view
and has no column default, deferring DEFAULT-expansion until the query
against the base relation is rewritten. For all other types of target
relation, including tables and trigger- and rule-updatable views, we
must continue to replace DEFAULT items with NULL in the absence of a
column default.
This is somewhat complicated by the fact that if an auto-updatable
view has DO ALSO rules attached, the VALUES lists for the product
queries need to be handled differently from the original query, since
the product queries need to act like rule-updatable views whereas the
original query has auto-updatable view semantics.
Back-patch to all supported versions.
Reported by Roger Curley (bug #15623). Patch by Amit Langote and me.
Michael Paquier [Wed, 20 Feb 2019 03:31:45 +0000 (12:31 +0900)]
Mark correctly initial slot snapshots with MVCC type when built
When building an initial slot snapshot, snapshots are marked with
historic MVCC snapshots as type with the marker field being set in
SnapBuildBuildSnapshot() but not overriden in SnapBuildExportSnapshot().
Existing callers of SnapBuildBuildSnapshot() do not care about the type
of snapshot used, but extensions calling it actually may, as reported.
Joe Conway [Sun, 17 Feb 2019 18:14:50 +0000 (13:14 -0500)]
Fix documentation for dblink_error_message() return value
The dblink documentation claims that an empty string is returned if there
has been no error, however OK is actually returned in that case. Also,
clarify that an async error may not be seen unless dblink_is_busy() or
dblink_get_result() have been called first.
Tom Lane [Sun, 17 Feb 2019 17:37:32 +0000 (12:37 -0500)]
Fix CREATE VIEW to allow zero-column views.
We should logically have allowed this case when we allowed zero-column
tables, but it was overlooked.
Although this might be thought a feature addition, it's really a bug
fix, because it was possible to create a zero-column view via
the convert-table-to-view code path, and then you'd have a situation
where dump/reload would fail. Hence, back-patch to all supported
branches.
Arrange the added test cases to provide coverage of the related
pg_dump code paths (since these views will be dumped and reloaded
during the pg_upgrade regression test). I also made them test
the case where pg_dump has to postpone the view rule into post-data,
which disturbingly had no regression coverage before.
Report and patch by Ashutosh Sharma (test case by me)
Tatsuo Ishii [Sun, 17 Feb 2019 11:42:14 +0000 (20:42 +0900)]
Doc: remove ancient comment.
There's a very old comment in rules.sgml added back to 2003. It
expected to a feature coming back but it never happened. So now we can
safely remove the comment. Back-patched to all supported branches.
Michael Paquier [Fri, 15 Feb 2019 08:12:46 +0000 (17:12 +0900)]
Fix support for CREATE TABLE IF NOT EXISTS AS EXECUTE
The grammar IF NOT EXISTS for CTAS is supported since 9.5 and documented
as such, however the case of using EXECUTE as query has never been
covered as EXECUTE CTAS statements and normal CTAS statements are parsed
separately.
Author: Andreas Karlsson
Discussion: https://postgr.es/m/2ddcc188-e37c-a0be-32bf-a56b07c3559e@proxel.se
Backpatch-through: 9.5
Thomas Munro [Thu, 14 Feb 2019 21:19:11 +0000 (10:19 +1300)]
Fix race in dsm_attach() when handles are reused.
DSM handle values can be reused as soon as the underlying shared memory
object has been destroyed. That means that for a brief moment we
might have two DSM slots with the same handle. While trying to attach,
if we encounter a slot with refcnt == 1, meaning that it is currently
being destroyed, we should continue our search in case the same handle
exists in another slot.
The race manifested as a rare "dsa_area could not attach to segment"
error, and was more likely in 10 and 11 due to the lack of distinct
seed for random() in parallel workers. It was made very unlikely in
in master by commit 197e4af9, and older releases don't usually create
new DSM segments in background workers so it was also unlikely there.
This fixes the root cause of bug report #15585, in which the error
could also sometimes result in a self-deadlock in the error path.
It's not yet clear if further changes are needed to avoid that failure
mode.
Back-patch to 9.4, where dsm.c arrived.
Author: Thomas Munro Reported-by: Justin Pryzby, Sergei Kornilov
Discussion: https://postgr.es/m/20190207014719.GJ29720@telsasoft.com
Discussion: https://postgr.es/m/15585-324ff6a93a18da46@postgresql.org
Alvaro Herrera [Tue, 12 Feb 2019 21:42:37 +0000 (18:42 -0300)]
Relax overly strict assertion
Ever since its birth, ReorderBufferBuildTupleCidHash() has contained an
assertion that a catalog tuple cannot change Cmax after acquiring one. But
that's wrong: if a subtransaction executes DDL that affects that catalog
tuple, and later aborts and another DDL affects the same tuple, it will
change Cmax. Relax the assertion to merely verify that the Cmax remains
valid and monotonically increasing, instead.
Tom Lane [Tue, 12 Feb 2019 06:12:52 +0000 (01:12 -0500)]
Fix erroneous error reports in snapbuild.c.
It's pretty unhelpful to report the wrong file name in a complaint
about syscall failure, but SnapBuildSerialize managed to do that twice
in a span of 50 lines. Also fix half a dozen missing or poorly-chosen
errcode assignments; that's mostly cosmetic, but still wrong.
Noted while studying recent failures on buildfarm member nightjar.
I'm not sure whether those reports are actually giving the wrong
filename, because there are two places here with identically
spelled error messages. The other one is specifically coded not
to report ENOENT, but if it's this one, how could we be getting
ENOENT from open() with O_CREAT? Need to sit back and await results.
However, these ereports are clearly broken from birth, so back-patch.
Tom Lane [Sun, 10 Feb 2019 02:02:06 +0000 (21:02 -0500)]
Solve cross-version-upgrade testing problem induced by 1fb57af92.
Renaming varchar_transform to varchar_support had a side effect
I hadn't foreseen: the core regression tests leave around a
transform object that relies on that function, so the name
change breaks cross-version upgrade tests, because the name
used in the older branches doesn't match.
Since the dependency on varchar_transform was chosen with the
aid of a dartboard anyway (it would surely not work as a
language transform support function), fix by just choosing
a different random builtin function with the right signature.
Also add some comments explaining why this isn't horribly unsafe.
I chose to make the same substitution in a couple of other
copied-and-pasted test cases, for consistency, though those
aren't directly contributing to the testing problem.
Per buildfarm. Back-patch, else it doesn't fix the problem.
Tom Lane [Sun, 10 Feb 2019 00:45:38 +0000 (19:45 -0500)]
Repair unsafe/unportable snprintf usage in pg_restore.
warn_or_exit_horribly() was blithely passing a potentially-NULL
string pointer to a %s format specifier. That works (at least
to the extent of not crashing) on some platforms, but not all,
and since we switched to our own snprintf.c it doesn't work
for us anywhere.
Of the three string fields being handled this way here, I think
that only "owner" is supposed to be nullable ... but considering
that this is error-reporting code, it has very little business
assuming anything, so put in defenses for all three.
Per a crash observed on buildfarm member crake and then
reproduced here. Because of the portability aspect,
back-patch to all supported versions.
projects / postgresql / log