Tim Chase [Tue, 13 Mar 2018 17:43:14 +0000 (12:43 -0500)]
Add zfs_scan_ignore_errors tunable
When it's set, a DTL range will be cleared even if its scan/scrub had
errors. This allows to work around resilver/scrub upon import when the
pool has errors.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #7293
Chunwei Chen [Mon, 12 Mar 2018 18:27:02 +0000 (11:27 -0700)]
Fix race in trace point in zrl_add_impl
We hit an illegal memory access in the zrlock trace point. The problem
is that zrl->zr_owner and zrl->zr_caller are assigned locklessly. And if
zrl->zr_owner got assigned a longer string between when __string()
calculate the strlen, and when __assign_str() does strcpy. The copy will
overflow the buffer.
==
For example:
Initial condition:
zrl->zr_owner = A
zrl->zr_caller = "abc"
Thread A Thread B
-------------------------------------------------
if (zrl->zr_owner == A) {
DTRACE_PROBE2() {
__string() {
strlen(zrl->zr_caller) -> 3
allocate buf[4]
}
Dereferencing zrl->zr_owner->pid may also be problematic, in that the
zrl->zr_owner got changed to other task, and that task exits, freeing
the task_struct. This should be very unlikely, as the other task need to
zrl_remove and exit between the dereferencing zr->zr_owner and
zr->zr_owner->pid. Nevertheless, we'll deal with it as well.
To fix the zrl->zr_caller issue, instead of copy the string content, we
just copy the pointer, this is safe because it always points to
__func__, which is static. As for the zrl->zr_owner issue, we pass in
curthread instead of using zrl->zr_owner.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #7291
Brian Behlendorf [Mon, 12 Mar 2018 18:26:05 +0000 (11:26 -0700)]
Fix MMP write frequency for large pools
When a single pool contains more vdevs than the CONFIG_HZ for
for the kernel the mmp thread will not delay properly. Switch
to using cv_timedwait_sig_hires() to handle higher resolution
delays.
This issue was reported on Arch Linux where HZ defaults to only
100 and this could be fairly easily reproduced with a reasonably
large pool. Most distribution kernels set CONFIG_HZ=250 or
CONFIG_HZ=1000 and thus are unlikely to be impacted.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7205
Closes #7289
Olaf Faaland [Thu, 8 Mar 2018 23:39:07 +0000 (15:39 -0800)]
Hold SCL_VDEV when counting leaves
A config lock should be held while vdev_count_leaves() walks the tree,
otherwise the pointers reference may become invalid during the walk.
SCL_VDEV is a minimal lock provided for such uses cases.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7286
Olaf Faaland [Thu, 8 Mar 2018 23:21:54 +0000 (15:21 -0800)]
Handle zio_resume and mmp => off
When multihost is disabled on a pool, and the pool is resumed via zpool
clear, within a single cycle of the mmp thread's loop (e.g. while it's
in the cv_timedwait call), both mmp_last_write and mmp_delay should be
updated.
The original code mistakenly treated the two cases as if they could not
occur at the same time.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7286
Tomohiro Kusumi [Thu, 22 Feb 2018 17:31:34 +0000 (02:31 +0900)]
Document allowed pool names
PR #7208 was a patch to allow non-reserved pool names which begin with
mirror, raidz, spare (but do not equal), however we'd rather document
it in the man page for compatibility with other OpenZFS implementations,
to avoid pool names that may not work on non-Linux platforms.
Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes #7216
LOLi [Fri, 9 Mar 2018 21:52:37 +0000 (22:52 +0100)]
Fix zfs-kmod builds when using rpm >= 4.14
With rpm-software-management/rpm@5e94633 a package version containing
invalid characters (most commonly a double '-') causes the kmod package
generation to terminate with an error. This change takes advantage of
the newly introduced rpm macro "_wrong_version_format_terminate_build"
to allow kmod packages to be built.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7284
Tomohiro Kusumi [Fri, 9 Mar 2018 21:47:32 +0000 (06:47 +0900)]
Change functions which return literals to return `const char*`
get_format_prompt_string() and zpool_state_to_name() return
a string literal which is read-only, thus they should return
`const char*`.
zpool_get_prop_string() returns a non-const string after
successful nv-lookup, and returns a string literal otherwise.
Since this function is designed to be used for read-only purpose,
the return type should also be `const char*`.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes #7285
Paul Zuchowski [Thu, 8 Mar 2018 01:03:33 +0000 (20:03 -0500)]
zdb and inuse tests don't pass with real disks
Due to zpool create auto-partioning in Linux (i.e. sdb1),
certain utilities need to use the parition (sdb1) while
others use the whole disk name (sdb).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Paul Zuchowski <pzuchowski@datto.com>
Closes #6939
Closes #7261
Take user namespaces into account in policy checks
Change file related checks to use user namespaces and make
sure involved uids/gids are mappable in the current
namespace.
Note that checks without file ownership information will
still not take user namespaces into account, as some of
these should be handled via 'zfs allow' (otherwise root in a
user namespace could issue commands such as `zpool export`).
This also adds an initial user namespace regression test
for the setgid bit loss, with a user_ns_exec helper usable
in further tests.
Additionally, configure checks for the required user
namespace related features are added for:
* ns_capable
* kuid/kgid_has_mapping()
* user_ns in cred_t
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Closes #6800
Closes #7270
The test could fail when attempting to write to a newly created
volume which was missing its device node. Resolve the issue by
calling block_device_wait() which blocks until udev creates the
needed entry.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7276
Closes #7277
Implement a new helper within_tolerance to test if a value
is within range of a target.
Because the dbufstats and dbufs kstat file are being read
at slightly different times, it is possible for stats to be
slightly off. Use within_tolerance to determine if the value
is "close enough" to the target.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #7239
Closes #7266
Tony Hutter [Tue, 6 Mar 2018 23:41:52 +0000 (15:41 -0800)]
Allow to limit zed's syslog chattiness
Some usage patterns like send/recv of replication streams can
produce a large number of events. In such a case, the current
all-syslog.sh zedlet will hold up to its name, and flood the
logs with mostly redundant information. Two mitigate this
situation, this changeset introduces to new variables
ZED_SYSLOG_SUBCLASS_INCLUDE and ZED_SYSLOG_SUBCLASS_EXCLUDE
to zed.rc that give more control over which event classes end
up in the syslog.
Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Daniel Kobras <d.kobras@science-computing.de>
Closes #6886
Closes #7260
Olaf Faaland [Tue, 27 Feb 2018 01:32:49 +0000 (20:32 -0500)]
Record skipped MMP writes in multihost_history
Once per pass through the MMP thread's loop, the vdev tree is walked to
find a suitable leaf to write the next MMP block to. If no such leaf is
found, the thread sleeps for a while and resumes at the top of the loop.
Add an entry to multihost_history when no leaf can be found, and record
the reason in the error column. The error code for such entries is a
bitfield, displayed in hex:
0x1 At least one vdev (interior or leaf) was not writeable.
0x2 At least one writeable leaf vdev was found, but it had a pending
MMP write.
timestamp = the time in seconds since the epoch when no leaf could be
found originally.
duration = the time (in ns) during which no MMP block was written for
this reason. This does not include the preceeding inter-write period
nor the following inter-write period.
vdev_guid = the number of sequential cycles of the MMP thread looop when
this occurred.
Sample output, truncated to fit:
For records of skipped MMP writes the right-most column, vdev_path, is
reported as "-".
Olaf Faaland [Wed, 21 Feb 2018 01:33:51 +0000 (17:33 -0800)]
Detect long config lock acquisition in mmp
If something holds the config lock as a writer for too long, MMP will
fail to issue MMP writes in a timely manner. This will result either in
the pool being suspended, or in an extreme case, in the pool not being
protected.
If the time to acquire the config lock exceeds 1/10 of the minimum
zfs_multihost_interval, report it in the zfs debug log.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7212
Datasets can be busy when calling zfs destroy. Introduce
a helper function to destroy datasets and use it to destroy
datasets in zfs_allow_004_pos, zfs_promote_008_pos, and
zfs_destroy_002_pos.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #7224
Closes #7246
Closes #7249
Closes #7267
Nasf-Fan [Mon, 5 Mar 2018 20:56:27 +0000 (04:56 +0800)]
Misc fixes and cleanup for project quota
1) The Coverity Scan reports some issues for the project
quota patch, including:
1.1) zfs_prop_get_userquota() directly uses the const quota
type value as the condition check by wrong.
1.2) dmu_objset_userquota_get_ids() may cause dnode::dn_newgid
to be overwritten by dnode::dn->dn_oldprojid.
2) This patch fixes related issues. It also enhances the logic
for zfs_project_item_alloc() to avoid buffer overflow.
3) Skip project quota ability check if does not change project
quota related things (id or flag). Otherwise, it will cause
chattr (for other non project quota flags) operation failed
if project quota disabled.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com>
Closes #7251
Closes #7265
As of https://github.com/torvalds/linux/commit/fb6d47a, get_disk()
is now get_disk_and_module(). Add a configure check to determine
if we need to use get_disk_and_module().
Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #7264
Tony Hutter [Mon, 5 Mar 2018 01:34:51 +0000 (17:34 -0800)]
Change checksum & IO delay ratelimit values
Change checksum & IO delay ratelimit thresholds from 5/sec to 20/sec.
This allows zed to actually trigger if a bunch of these events arrive in
a short period of time (zed has a threshold of 10 events in 10 sec).
Previously, if you had, say, 100 checksum errors in 1 sec, it would get
ratelimited to 5/sec which wouldn't trigger zed to fault the drive.
Also, convert the checksum and IO delay thresholds to module params for
easy testing.
Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #7252
chrisrd [Fri, 2 Mar 2018 18:01:53 +0000 (05:01 +1100)]
Increment zil_itx_needcopy_bytes properly
In zil_lwb_commit() with TX_WRITE, we copy the log write record (lrw)
into the log write block (lwb) and send it off using zil_lwb_add_txg().
If we also have WR_NEED_COPY, we additionally copy the lwr's data into
the lwb to be sent off. If the lwr + data doesn't fit into the lwb, we
send the lrw and as much data as will fit (dnow bytes), then go back
and do the same with the remaining data.
Each time through this loop we're sending dnow data bytes. I.e.
zil_itx_needcopy_bytes should be incremented by dnow.
Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes #6988
Closes #7176
chrisrd [Fri, 2 Mar 2018 17:57:29 +0000 (04:57 +1100)]
ZTS: fix spurious failures in mv_files
The test could fail because of a race condition between the files being
generated in the background and attempting to move the files. Wait for
all file generation to complete before trying to move the files around.
Also, clean up the waiting: the 'wait' command without arguments waits
for all child pids.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes #7220
Closes #7242
Closes #7258
This change adds a test for sequential reads out of the dbuf cache.
It's essentially a copy of sequential_reads_cached, using a smaller
data set. The sequential read tests are renamed to differentiate them.
Authored by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: John Wren Kennedy <john.kennedy@delphix.com>
Closes #7225
John Eismeier [Wed, 28 Feb 2018 16:57:10 +0000 (11:57 -0500)]
Fix some typos
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: George Melikov <mail@gmelikov.ru> Signed-off-by: John Eismeier <john.eismeier@gmail.com>
Closes #7237
Tomohiro Kusumi [Wed, 28 Feb 2018 16:54:53 +0000 (01:54 +0900)]
Fix zpool(8) list example to match actual format
a05dfd00 (Illumos 5147) has swapped FRAG and EXPANDSZ,
so it's natural to modify these examples.
# zpool list | head -1
NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
^^^^^^^^^^^^^^^
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tomohiro Kusumi <kusumi.tomohiro@osnexus.com>
Closes #7244
Add new script arc_summary3.py as a complete rewrite of the
arc_summary.py tool (see issue #6873)
Add new options:
-g/--graph - Display crude graphic representation
of ARC status and quit
-r/--raw - Print all available information as
minimally formatted list (for grep)
-s/--section - Print a single section. This
replaces -p/--page, which is kept for
backwards use but marked as
depreciated
Add new sections with information on ZIL and SPL. Notify user
if sections L2ARC and VDEV are skipped instead of failing
silently. Add warning that -p/--page option is depreciated.
Developed for Python 3.5.
Reviewed-by: Richard Laager <rlaager@wiktel.com> Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com>
Reviewed by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Scot W. Stevenson <scot.stevenson@gmail.com>
Closes #6873
Closes #6892
Tony Hutter [Tue, 27 Feb 2018 17:31:27 +0000 (09:31 -0800)]
Add SMART self-test results to zpool status -c
Add in SMART self-test results to zpool status|iostat -c. This
works for both SAS and SATA drives.
Also, add plumbing to allow the 'smart' script to take smartctl
output from a directory of output text files instead of running
it against the vdevs.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #7178
Tom Caputi [Tue, 27 Feb 2018 17:04:05 +0000 (12:04 -0500)]
Raw DRR_OBJECT records must write raw data
b1d21733 made it possible for empty metadnode blocks to be
compressed to a hole, fixing a bug that would cause invalid
metadnode MACs when a send stream attempted to free objects
and allowing the blocks to be reclaimed when they were no
longer needed. However, this patch also introduced a race
condition; if a txg sync occurred after a DRR_OBJECT_RANGE
record was received but before any objects were added, the
metadnode block would be compressed to a hole and lose all
of its encryption parameters. This would cause subsequent
DRR_OBJECT records to fail when they attempted to write
their data into an unencrypted block. This patch defers the
DRR_OBJECT_RANGE handling to receive_object() so that the
encryption parameters are set with each object that is
written into that block.
Reviewed-by: Kash Pande <kash@tripleback.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7215
Closes #7236
Tim Chase [Mon, 26 Feb 2018 22:20:12 +0000 (16:20 -0600)]
Incorrect maximum DVA value in DDE_GET_NDVAS()
The conditional was reversed which caused garbage values to be used when
calculating dds_ref_dsize.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tom Caputi <tcaputi@datto.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #7234
Brian Behlendorf [Sat, 24 Feb 2018 18:07:12 +0000 (10:07 -0800)]
ZTS: Fix zfs_share_* test case failures
Prevent false positives when running the zfs_share_* test
cases due to leftover stale /var/lib/nfs/etab entries. When
starting the test group re-synchronize the /var/lib/nfs/etab
file with /etc/exports. At this point in the testing there
will be no additional `zfs share` entries to add.
Reviewed by: George Melikov <mail@gmelikov.ru> Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7226
Tony Hutter [Fri, 23 Feb 2018 19:38:05 +0000 (11:38 -0800)]
Add scrub after resilver zed script
* Add a zed script to kick off a scrub after a resilver. The script is
disabled by default.
* Add a optional $PATH (-P) option to zed to allow it to use a custom
$PATH for its zedlets. This is needed when you're running zed under
the ZTS in a local workspace.
* Update test scripts to not copy in all-debug.sh and all-syslog.sh by
default. They can be optionally copied in as part of zed_setup().
These scripts slow down zed considerably under heavy events loads and
can cause events to be dropped or their delivery delayed. This was
causing some sporadic failures in the 'fault' tests.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Richard Laager <rlaager@wiktel.com> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #4662
Closes #7086
chrisrd [Fri, 23 Feb 2018 16:50:06 +0000 (03:50 +1100)]
Fix free memory calculation on v3.14+
Provide infrastructure to auto-configure to enum and API changes in the
global page stats used for our free memory calculations.
arc_free_memory has been broken since an API change in Linux v3.14:
2016-07-28 v4.8 599d0c95 mm, vmscan: move LRU lists to node
2016-07-28 v4.8 75ef7184 mm, vmstat: add infrastructure for per-node
vmstats
These commits moved some of global_page_state() into
global_node_page_state(). The API change was particularly egregious as,
instead of breaking the old code, it silently did the wrong thing and we
continued using global_page_state() where we should have been using
global_node_page_state(), thus indexing into the wrong array via
NR_SLAB_RECLAIMABLE et al.
There have been further API changes along the way:
2017-07-06 v4.13 385386cf mm: vmstat: move slab statistics from zone to
node counters
2017-09-06 v4.14 c41f012a mm: rename global_page_state to
global_zone_page_state
...and various (incomplete, as it turns out) attempts to accomodate
these changes in ZoL:
2017-08-24 2209e409 Linux 4.8+ compatibility fix for vm stats
2017-09-16 787acae0 Linux 3.14 compat: IO acct, global_page_state, etc
2017-09-19 661907e6 Linux 4.14 compat: IO acct, global_page_state, etc
The config infrastructure provided here resolves these issues going back
to the original API change in v3.14 and is robust against further Linux
changes in this area.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes #7170
Olaf Faaland [Thu, 22 Feb 2018 23:34:34 +0000 (15:34 -0800)]
Report duration and error in mmp_history entries
After an MMP write completes, update the relevant mmp_history entry
with the time between submission and completion, and the error
status of the write.
Where duration = gethrtime_in_done_fn - gethrtime_at_submission, and
error = zio->io_error.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7190
Olaf Faaland [Thu, 22 Feb 2018 17:14:46 +0000 (09:14 -0800)]
Do not initiate MMP writes while pool is suspended
While the pool is suspended on host A, it may be imported on host B.
If host A continued to write MMP blocks, it would be blindly
overwriting MMP blocks written by host B, and the blocks written by
host A would have outdated txg information.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7182
Tony Hutter [Thu, 22 Feb 2018 17:02:06 +0000 (09:02 -0800)]
Linux 4.16 compat: use correct *_dec_and_test()
Use refcount_dec_and_test() on 4.16+ kernels, atomic_dec_and_test()
on older kernels. https://lwn.net/Articles/714974/
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Closes: #7179 Closes: #7211
Tom Caputi [Thu, 22 Feb 2018 16:50:14 +0000 (11:50 -0500)]
Fix bounds check in zio_crypt_do_objset_hmacs
The current bounds check in zio_crypt_do_objset_hmacs() does not
properly handle the possible sizes of the objset_phys_t and
can therefore read outside the buffer's memory. If that memory
happened to match what the check was actually looking for, the
objset would fail to be owned, complaining that the MAC was
invalid.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7210
chrisrd [Wed, 21 Feb 2018 20:35:59 +0000 (07:35 +1100)]
Allow make checkstyle and paxscript in build dir
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes #7202
LOLi [Wed, 21 Feb 2018 20:32:06 +0000 (21:32 +0100)]
Want 'zfs send -b'
This change implements 'zfs send -b' which can be used to send only
received property values whether or not they are overridden by local
settings.
This can be very useful during "restore" operations from a backup pool
because it allows to send only the property values originally sent
from the backup source, even though they were later modified on the
destination either by a 'zfs set' operation, explicit 'zfs inherit' or
overridden during the receive process via 'zfs receive -o|-x'.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7156
Tom Caputi [Wed, 21 Feb 2018 20:31:03 +0000 (15:31 -0500)]
Raw receive should change key atomically
Currently, raw zfs sends transfer the encrypted master keys and
objset_phys_t encryption parameters in the DRR_BEGIN payload of
each send file. Both of these are processed as soon as they are
read in dmu_recv_stream(), meaning that the new keys are set
before the new snapshot is received. In addition to the fact that
this changes the user's keys for the dataset earlier than they
might expect, the keys were never reset to what they originally
were in the event that the receive failed. This patch splits the
processing into objset handling and key handling, the later of
which is moved to dmu_recv_end() so that they key change can be
done atomically.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7200
Tom Caputi [Wed, 21 Feb 2018 20:30:11 +0000 (15:30 -0500)]
Prevent raw zfs recv -F if dataset is unencrypted
The current design of ZFS encryption only allows a dataset to
have one DSL Crypto Key at a time. As a result, it is important
that the zfs receive code ensures that only one key can be in use
at a time for a given DSL Directory. zfs receive -F complicates
this, since the new dataset is received as a clone of the existing
one so that an atomic switch can be done at the end. To prevent
confusion about which dataset is actually encrypted a check was
added to ensure that encrypted datasets cannot use zfs recv -F to
completely replace existing datasets. Unfortunately, the check did
not take into account unencrypted datasets being overriden by
encrypted ones as a case.
Along the same lines, the code also failed to ensure that raw
recieves could not be done on top of existing unencrypted
datasets, which causes amny problems since the new stream cannot
be decrypted.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7199
Tom Caputi [Wed, 21 Feb 2018 20:28:52 +0000 (15:28 -0500)]
Raw receives must compress metadnode blocks
Currently, the DMU relies on ZIO layer compression to free LO
dnode blocks that no longer have objects in them. However,
raw receives disable all compression, meaning that these blocks
can never be freed. In addition to the obvious space concerns,
this could also cause incremental raw receives to fail to mount
since the MAC of a hole is different from that of a completely
zeroed block.
This patch corrects this issue by adding a special case in
zio_write_compress() which will attempt to compress these blocks
to a hole even if ZIO_FLAG_RAW_ENCRYPT is set. This patch also
removes the zfs_mdcomp_disable tunable, since tuning it could
cause these same issues.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7198
Tom Caputi [Wed, 21 Feb 2018 20:26:51 +0000 (15:26 -0500)]
Remove unnecessary txg syncs from receive_object()
1b66810b introduced serveral changes which improved the reliability
of zfs sends when large dnodes were involved. However, these fixes
required adding a few calls to txg_wait_synced() in the DRR_OBJECT
handling code. Although most of them are currently necessary, this
patch allows the code to continue without waiting in some cases
where it doesn't have to.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7197
Tom Caputi [Wed, 21 Feb 2018 20:24:37 +0000 (15:24 -0500)]
Add omitted set for os->os_next_write_raw
This one line patch adds adds a set to os->os_next_write_raw
that was omitted when the code was updated in 1b66810. Without
it, the code (in some instances) could attempt to write raw
encrypted data as regular unencrypted data without the keys
being loaded, triggering an ASSERT in zio_encrypt().
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7196
A log_must call was causing count_uberblocks to return more
than just the uberblock count. Remove the log_must since it
was only logging a sleep.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #7191
Tom Caputi [Wed, 21 Feb 2018 00:27:31 +0000 (19:27 -0500)]
ZIL claiming should not start user accounting
Currently, ZIL claiming dirties objsets which causes
dsl_pool_sync() to attempt to perform user accounting on
them. This causes problems for encrypted datasets that were
raw received before the system went offline since they
cannot perform user accounting until they have their keys
loaded. This triggers an ASSERT in zio_encrypt(). Since
encryption was added, the code now depends on the fact that
data should only be written when objsets are owned. This
patch adds a check in dmu_objset_do_userquota_updates()
to ensure that useraccounting is only done when the objsets
are actually owned for write. As part of this work, the
zfsvfs and zvol code was updated so that it no longer lies
about owning objsets readonly.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6916
Closes #7163
Tom Caputi [Tue, 20 Feb 2018 17:41:07 +0000 (12:41 -0500)]
Project dnode should be protected by local MAC
This patch corrects a small security issue with 9c5167d1. When the
project dnode was added to the objset_phys_t, it was not included
in the local MAC for cryptographic protection, allowing an attacker
to modify this data without the consent of the key holder. This
patch does represent an on-disk format change for anyone using
project dnodes on an encrypted dataset.
Signed-off-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7177
chrisrd [Thu, 15 Feb 2018 20:58:23 +0000 (07:58 +1100)]
Fix config issues: frame size and headers
1. With various (debug and/or tracing?) kernel options enabled it's
possible for 'struct inode' and 'struct super_block' to exceed the
default frame size, leaving errors like this in config.log:
build/conftest.c:116:1: error: the frame size of 1048 bytes is larger
than 1024 bytes [-Werror=frame-larger-than=]
Fix this by removing the frame size warning for config checks
2. Without the correct headers included, it's possible for declarations
to be missed, leaving errors like this in the config.log:
build/conftest.c:131:14: error: ‘struct nameidata’ declared inside
parameter list [-Werror]
Fix this by adding appropriate headers.
Note: Both these issues can result in silent config failures because
the compile failure is taken to mean "this option is not supported by
this kernel" rather than "there's something wrong with the config
test". This can lead to something merely annoying (compile failures) to
something potentially serious (miscompiled or misused kernel primitives
or functions). E.g. the fixes included here resulted in these
additional defines in zfs_config.h with linux v4.14.19:
Also, drive-by whitespace fixes in config/* files which don't mention
"GNU" (those ones look to be imported from elsewhere so leave them
alone).
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chris Dunlop <chris@onthe.net.au>
Closes #7169
Don Brady [Thu, 15 Feb 2018 17:53:04 +0000 (10:53 -0700)]
Address objtool check failures in lua module
The use of void __attribute__((noreturn)) in kernel builds
was causing lots of warnings if CONFIG_STACK_VALIDATION
is active. For now we just remove this attribute to achieve
clean builds for the Lua module. There was no significant
increase in the time to run the full channel_program ZTS tests.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Don Brady <don.brady@delphix.com>
Closes #7173
Olaf Faaland [Thu, 15 Feb 2018 17:50:06 +0000 (09:50 -0800)]
Clarify zinject(8) explanation of -e
Error injection of EIO or ENXIO simply sets the zio's io_error value,
rather than preventing the read or write from occurring. This is
important information as it affects how the probes must be used.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #7172
George Wilson [Thu, 8 Feb 2018 20:04:14 +0000 (15:04 -0500)]
OpenZFS 8857 - zio_remove_child() panic due to already destroyed parent zio
PROBLEM
=======
It's possible for a parent zio to complete even though it has children
which have not completed. This can result in the following panic:
> $C ffffff01809128c0 vpanic() ffffff01809128e0 mutex_panic+0x58(fffffffffb94c904, ffffff597dde7f80) ffffff0180912950 mutex_vector_enter+0x347(ffffff597dde7f80) ffffff01809129b0 zio_remove_child+0x50(ffffff597dde7c58, ffffff32bd901ac0, ffffff3373370908) ffffff0180912a40 zio_done+0x390(ffffff32bd901ac0) ffffff0180912a70 zio_execute+0x78(ffffff32bd901ac0) ffffff0180912b30 taskq_thread+0x2d0(ffffff33bae44140) ffffff0180912b40 thread_start+8()
> ::status
debugging crash dump vmcore.2 (64-bit) from batfs0390
operating system: 5.11 joyent_20170911T171900Z (i86pc)
image uuid: (not set)
panic message: mutex_enter: bad mutex, lp=ffffff597dde7f80
owner=ffffff3c59b39480 thread=ffffff0180912c40
dump content: kernel pages only
The problem is that dbuf_prefetch along with l2arc can create a zio tree
which confuses the parent zio and allows it to complete with while children
still exist. Here's the scenario:
zio tree:
pio
|--- lio
The parent zio, pio, has entered the zio_done stage and begins to check its
children to see there are still some that have not completed. In zio_done(),
the children are checked in the following order:
zio_wait_for_children(zio, ZIO_CHILD_VDEV, ZIO_WAIT_DONE)
zio_wait_for_children(zio, ZIO_CHILD_GANG, ZIO_WAIT_DONE)
zio_wait_for_children(zio, ZIO_CHILD_DDT, ZIO_WAIT_DONE)
zio_wait_for_children(zio, ZIO_CHILD_LOGICAL, ZIO_WAIT_DONE)
If pio, finds any child which has not completed then it stops executing and
goes to sleep. Each call to zio_wait_for_children() will grab the io_lock
while checking the particular child.
In this scenario, the pio has completed the first call to
zio_wait_for_children() to check for any ZIO_CHILD_VDEV children. Since
the only zio in the zio tree right now is the logical zio, lio, then it
completes that call and prepares to check the next child type.
In the meantime, the lio completes and in its callback creates a child vdev
zio, cio. The zio tree looks like this:
zio tree:
pio
|--- lio
|--- cio
The lio then grabs the parent's io_lock and removes itself.
zio tree:
pio
|--- cio
The pio continues to run but has already completed its check for ZIO_CHILD_VDEV
and will erroneously complete. When the child zio, cio, completes it will panic
the system trying to reference the parent zio which has been destroyed.
SOLUTION
========
The fix is to rework the zio_wait_for_children() logic to accept a bitfield
for all the children types that it's interested in checking. The
io_lock will is held the entire time we check all the children types. Since
the function now accepts a bitfield, a simple ZIO_CHILD_BIT() macro is provided
to allow for the conversion between a ZIO_CHILD type and the bitfield used by
the zio_wiat_for_children logic.
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Youzhong Yang <youzhong@gmail.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8857
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/862ff6d99c
Issue #5918
Closes #7168
loli10K [Sat, 30 Dec 2017 23:25:56 +0000 (00:25 +0100)]
OpenZFS 8940 - Sending an intra-pool resumable send stream may result in EXDEV
Because resuming from a token requires "guid" -> "snapshot" mapping
we have to walk the whole dataset hierarchy to find the right snapshot
to send; when both source and destination exists, for an incremental
resumable stream, libzfs gets confused and picks up the wrong snapshot
to send from: this results in attempting to send
"destination@snap1 -> source@snap2"
instead of
"source@snap1 -> source@snap2"
which fails with a "Invalid cross-device link" error (EXDEV).
Fix this by adjusting the logic behind dataset traversal in
zfs_iter_children() to pick the right snapshot to send from.
Additionally update dry-run 'zfs send -t' to print its output to
stderr: this is consistent with other dry-run commands.
Nasf-Fan [Tue, 13 Feb 2018 22:54:54 +0000 (06:54 +0800)]
Project Quota on ZFS
Project quota is a new ZFS system space/object usage accounting
and enforcement mechanism. Similar as user/group quota, project
quota is another dimension of system quota. It bases on the new
object attribute - project ID.
Project ID is a numerical value to indicate to which project an
object belongs. An object only can belong to one project though
you (the object owner or privileged user) can change the object
project ID via 'chattr -p' or 'zfs project [-s] -p' explicitly.
The object also can inherit the project ID from its parent when
created if the parent has the project inherit flag (that can be
set via 'chattr +P' or 'zfs project -s [-p]').
By accounting the spaces/objects belong to the same project, we
can know how many spaces/objects used by the project. And if we
set the upper limit then we can control the spaces/objects that
are consumed by such project. It is useful when multiple groups
and users cooperate for the same project, or a user/group needs
to participate in multiple projects.
Support the following commands and functionalities:
zfs set projectquota@project
zfs set projectobjquota@project
zfs get projectquota@project
zfs get projectobjquota@project
zfs get projectused@project
zfs get projectobjused@project
This patch also supports tree quota based on the project quota via
"zfs project" commands set as following:
zfs project [-d|-r] <file|directory ...>
zfs project -C [-k] [-r] <file|directory ...>
zfs project -c [-0] [-d|-r] [-p id] <file|directory ...>
zfs project [-p id] [-r] [-s] <file|directory ...>
For "df [-i] $DIR" command, if we set INHERIT (project ID) flag on
the $DIR, then the proejct [obj]quota and [obj]used values for the
$DIR's project ID will be shown as the total/free (avail) resource.
Keep the same behavior as EXT4/XFS does.
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by Ned Bass <bass6@llnl.gov> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Fan Yong <fan.yong@intel.com>
TEST_ZIMPORT_POOLS="zol-0.6.1 zol-0.6.2 master"
Change-Id: Ib4f0544602e03fb61fd46a849d7ba51a6005693c
Closes #6290
LOLi [Mon, 12 Feb 2018 20:28:59 +0000 (21:28 +0100)]
'zfs receive' fails with "dataset is busy"
Receiving an incremental stream after an interrupted "zfs receive -s"
fails with the message "dataset is busy": this is because we still have
the hidden clone ../%recv from the resumable receive.
Improve the error message suggesting the existence of a partially
complete resumable stream from "zfs receive -s" which can be either
aborted ("zfs receive -A") or resumed ("zfs send -t").
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7129
Closes #7154
LOLi [Mon, 12 Feb 2018 19:40:00 +0000 (20:40 +0100)]
contrib/initramfs: add missing conf.d/zfs
When upgrading from the distribution-provided zfs-initramfs package on
root-on-zfs Ubuntu and Debian the system may fail to boot: this change
adds the missing initramfs configuration file.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Richard Laager <rlaager@wiktel.com> Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7158
8520 lzc_rollback_to should support rolling back to origin
7198 libzfs should gracefully handle EINVAL from lzc_rollback
lzc_rollback_to() should support rolling back to a clone's origin.
The current checks in zfs_ioc_rollback() would not allow that
because the origin snapshot belongs to a different filesystem.
The overly restrictive check was in introduced in 7600, but it
was not a regression as none of the existing tools provided a
way to rollback to the origin.
Authored by: Andriy Gapon <avg@FreeBSD.org>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@joyent.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/8520
OpenZFS-issue: https://www.illumos.org/issues/7198
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/78a5a1a25a
Closes #7150
sanjeevbagewadi [Fri, 9 Feb 2018 18:15:53 +0000 (23:45 +0530)]
Handle zap_add() failures in mixed case mode
With "casesensitivity=mixed", zap_add() could fail when the number of
files/directories with the same name (varying in case) exceed the
capacity of the leaf node of a Fatzap. This results in a ASSERT()
failure as zfs_link_create() does not expect zap_add() to fail. The fix
is to handle these failures and rollback the transactions.
Chunwei Chen [Fri, 2 Feb 2018 00:36:40 +0000 (16:36 -0800)]
Fix zdb -ed on objset for exported pool
zdb -ed on objset for exported pool would failed with:
failed to own dataset 'qq/fs0': No such file or directory
The reason is that zdb pass objset name to spa_import, it uses that
name to create a spa. Later, when dmu_objset_own tries to lookup the spa
using real pool name, it can't find one.
We fix this by make sure we pass pool name rather than objset name to
spa_import.
Chunwei Chen [Fri, 2 Feb 2018 00:19:36 +0000 (16:19 -0800)]
Fix zdb -R decompression
There are some issues in the zdb -R decompression implementation.
The first is that ZLE can easily decompress non-ZLE streams. So we add
ZDB_NO_ZLE env to make zdb skip ZLE.
The second is the random bytes appended to pabd, pbuf2 stuff. This serve
no purpose at all, those bytes shouldn't be read during decompression
anyway. Instead, we randomize lbuf2, so that we can make sure
decompression fill exactly to lsize by bcmp lbuf and lbuf2.
The last one is the condition to detect fail is wrong.
Chunwei Chen [Tue, 30 Jan 2018 21:39:11 +0000 (13:39 -0800)]
Fix zdb -c traverse stop on damaged objset root
If a corruption happens to be on a root block of an objset, zdb -c will
not correctly report the error, and it will not traverse the datasets
that come after. This is because traverse_visitbp, which does the
callback and reset error for TRAVERSE_HARD, is skipped when traversing
zil is failed in traverse_impl.
Here's example of what 'zdb -eLcc' command looks like on a pool with
damaged objset root:
Related to commit 4859fe796, when directly using the kernel's
refcount functions in kernel compatibility code do not map
refcount_t to zfs_refcount_t. This leads to a type mismatch.
Longer term we should consider renaming refcount_t to
zfs_refcount_t in the zfs code base.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@nutanix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7148
A new interface was added to manipulate the version field of an
inode. Add a inode_set_iversion() wrapper for older kernels and
use the new interface when available.
The i_version field was dropped from the trace point due to the
switch to an atomic64_t i_version type.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@nutanix.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7148
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com>
We want to be able to run channel programs outside of synching
context. This would greatly improve performance for channel programs
that just gather information, as they won't have to wait for synching
context anymore.
=== What is implemented?
This feature introduces the following:
- A new command line flag in "zfs program" to specify our intention
to run in open context. (The -n option)
- A new flag/option within the channel program ioctl which selects
the context.
- Appropriate error handling whenever we try a channel program in
open-context that contains zfs.sync* expressions.
- Documentation for the new feature in the manual pages.
=== How do we handle zfs.sync functions in open context?
When such a function is found by the interpreter and we are running
in open context we abort the script and we spit out a descriptive
runtime error. For example, given the script below ...
if we run it in open context, we will get back the following error:
Channel program execution failed:
[string "channel program"]:3: running functions from the zfs.sync
submodule requires passing sync=TRUE to lzc_channel_program()
(i.e. do not specify the "-n" command line argument)
stack traceback:
[C]: in function 'destroy'
[string "channel program"]:3: in main chunk
=== What about testing?
We've introduced new wrappers for all channel program tests that
run each channel program as both (startard & open-context) and
expect the appropriate behavior depending on the program using
the zfs.sync module.
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andy Stormont <astormont@racktopsystems.com>
Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com>
Every time we want to unmount a snapshot (happens during snapshot
deletion or renaming) we unnecessarily iterate through all the
mountpoints in the VFS layer (see zfs_get_vfs).
The current patch completely gets rid of that code and changes
the approach while keeping the behavior of that code path the
same. Specifically, it puts a hold on the dataset/snapshot and
gets its vfs resource reference directly, instead of linearly
searching for it. If that reference exists we attempt to amount
it.
With the above change, it became obvious that the nvlist
manipulations that we do (add_boolean and add_nvlist) take a
significant amount of time ensuring uniqueness of every new
element even though they don't have too. Thus, we updated the
patch so those nvlists are not trying to enforce the uniqueness
of their elements.
A more complete analysis of the problem solved by this patch
can be found below:
https://sdimitro.github.io/post/snap-unmount-perf/
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com>
ZFS channel programs should be able to create snapshots.
In addition to the base snapshot functionality, this entails extra
logic to handle edge cases which were formerly not possible, such as
creating then destroying a snapshot in the same transaction sync.
Brad Lewis [Thu, 8 Feb 2018 16:20:33 +0000 (09:20 -0700)]
OpenZFS 8592 - ZFS channel programs - rollback
Authored by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com>
ZFS channel programs should be able to perform a rollback.
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Don Brady <don.brady@delphix.com>
zfs.exists() in channel programs doesn't return any result, and should
have a man page entry. This patch corrects zfs.exists so that it
returns a value indicating if the dataset exists or not. It also adds
documentation about it in the man page.
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Garrett D'Amore <garrett@damore.org> Ported-by: Don Brady <don.brady@delphix.com> Ported-by: John Kennedy <john.kennedy@delphix.com>
OpenZFS-issue: https://www.illumos.org/issues/7431
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/dfc11533
Porting Notes:
* The CLI long option arguments for '-t' and '-m' don't parse on linux
* Switched from kmem_alloc to vmem_alloc in zcp_lua_alloc
* Lua implementation is built as its own module (zlua.ko)
* Lua headers consumed directly by zfs code moved to 'include/sys/lua/'
* There is no native setjmp/longjump available in stock Linux kernel.
Brought over implementations from illumos and FreeBSD
* The get_temporary_prop() was adapted due to VFS platform differences
* Use of inline functions in lua parser to reduce stack usage per C call
* Skip some ZFS Test Suite ZCP tests on sparc64 to avoid stack overflow
LOLi [Wed, 7 Feb 2018 20:43:24 +0000 (21:43 +0100)]
Verify ZFS Test Suite scripts executability
This change adds a make target 'testscheck' which verifies all ksh test
scripts, part of the ZFS Test Suite, have their executable bit set:
this should avoid adding new test scripts that cannot be executed by
the test-runner.py which would result in the following warning message:
Warning: Test removed from TestGroup because it failed verification.
This also verifies both *.cfg and *.kshlib files used in the ZFS Test
Suite are not executable.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #7131
Richard Elling [Wed, 7 Feb 2018 19:54:20 +0000 (11:54 -0800)]
Remove deprecated zfs_arc_p_aggressive_disable
zfs_arc_p_aggressive_disable is no more. This PR removes docs
and module parameters for zfs_arc_p_aggressive_disable.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Richard Elling <Richard.Elling@RichardElling.com>
Closes #7135
The generated zfs-load-key.sh file should have been added to
the .gitignore file as part of commit 7da8f8d8. And the
generated file should not be included in the repo.
Reviewed-by: Matthew Thode <prometheanfire@gentoo.org> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7134
DeHackEd [Wed, 7 Feb 2018 00:35:16 +0000 (19:35 -0500)]
Fix `zpool status` overflow on fast scrubs
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Richard Elling <Richard.Elling@RichardElling.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: DHE <git@dehacked.net>
Closes #7133
The distribution provided architecture specific RPM macro files
for x86_64 and other architectures on Debian/Ubuntu specify the
wrong default libdir install location. When building deb packages
override _lib with the correct location.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: loli10K <ezomori.nozomu@gmail.com>
Reviewed by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7083
Closes #7101
Tom Caputi [Tue, 6 Feb 2018 00:57:53 +0000 (19:57 -0500)]
Adjust ARC prefetch tunables to match docs
Currently, the ARC exposes 2 tunables (zfs_arc_min_prefetch_ms
and zfs_arc_min_prescient_prefetch_ms) which are documented
to be specified in milliseconds. However, the code actually
uses the values as though they were in seconds. This patch
adjusts the code to match the names and documentation of the
tunables.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: George Melikov <mail@gmelikov.ru> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #7126
In order to reliably detect deadlocks in the create and import
path ztest should set the failure mode property. This ensures
that the pool is always using the correct failmode behavior.
Removed insidious use of local variable in MAXFAULTS macro.
Converted VERIFY() to VERIFY0() where appropriate.
Reviewed-by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7111
The keystore.sk_dk_lock should not be held while performing I/O.
Drop the lock when reading from disk and update the code so
they the first successful caller adds the key.
Improve error handling in spa_keystore_create_mapping_impl().
Reviewed by: Thomas Caputi <tcaputi@datto.com> Reviewed-by: RageLtMan <rageltman@sempervictus> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #7112
Closes #7115
LOLi [Fri, 2 Feb 2018 21:50:42 +0000 (22:50 +0100)]
Fix systemd_ RPM macros usage on Debian-based distributions
Debian-based distributions do not seem to provide RPM macros for
dealing with systemd pre- and post- (un)install actions: this results
in errors when installing or upgrading .deb packages because the
resulting control scripts contain the following unresolved macros:
Tom Caputi [Thu, 1 Feb 2018 20:37:24 +0000 (15:37 -0500)]
Change os->os_next_write_raw to work per txg
Currently, os_next_write_raw is a single boolean used for determining
whether or not the next call to dmu_objset_sync() should write out
the objset_phys_t as a raw buffer. Since the boolean is not associated
with a txg, the work simply happens during the next txg, which is not
necessarily the correct one. In the current implementation this issue
was misdiagnosed, resulting in a small hack in dmu_objset_sync() which
seemed to resolve the problem.
This patch changes os_next_write_raw to be an array of booleans, one
for each txg in TXG_OFF and removes the hack.
Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6864
Tom Caputi [Fri, 19 Jan 2018 09:19:47 +0000 (04:19 -0500)]
Raw sends must be able to decrease nlevels
Currently, when a raw zfs send file includes a DRR_OBJECT record
that would decrease the number of levels of an existing object,
the object is reallocated with dmu_object_reclaim() which
creates the new dnode using the old object's nlevels. For non-raw
sends this doesn't really matter, but raw sends require that
nlevels on the receive side match that of the send side so that
the checksum-of-MAC tree can be properly maintained. This patch
corrects the issue by freeing the object completely before
allocating it again in this case.
This patch also corrects several issues with dnode_hold_impl()
and related functions that prevented dnodes (particularly
multi-slot dnodes) from being reallocated properly due to
the fact that existing dnodes were not being fully cleaned up
when they were freed.
This patch adds a test to make sure that zfs recv functions
properly with incremental streams containing dnodes of different
sizes.
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Jorgen Lundman <lundman@lundman.net> Signed-off-by: Tom Caputi <tcaputi@datto.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #6821
Closes #6864
Tom Caputi [Mon, 4 Dec 2017 19:10:31 +0000 (14:10 -0500)]
Fix recovery import (-F) with encrypted pool
When performing zil_claim() at pool import time, it is
important that encrypted datasets set os_next_write_raw
before writing to the zil_header_t. This prevents the code
from attempting to re-authenticate the objset_phys_t when
it writes it out, which is unnecessary because the
zil_header_t is not protected by either objset MAC and
impossible since the keys aren't loaded yet. Unfortunately,
one of the code paths did not set this flag, which causes
failed ASSERTs during 'zpool import -F'. This patch corrects
this issue.
Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6864
Closes #6916
Tom Caputi [Wed, 8 Nov 2017 19:12:59 +0000 (14:12 -0500)]
Encryption Stability and On-Disk Format Fixes
The on-disk format for encrypted datasets protects not only
the encrypted and authenticated blocks themselves, but also
the order and interpretation of these blocks. In order to
make this work while maintaining the ability to do raw
sends, the indirect bps maintain a secure checksum of all
the MACs in the block below it along with a few other
fields that determine how the data is interpreted.
Unfortunately, the current on-disk format erroneously
includes some fields which are not portable and thus cannot
support raw sends. It is not possible to easily work around
this issue due to a separate and much smaller bug which
causes indirect blocks for encrypted dnodes to not be
compressed, which conflicts with the previous bug. In
addition, the current code generates incompatible on-disk
formats on big endian and little endian systems due to an
issue with how block pointers are authenticated. Finally,
raw send streams do not currently include dn_maxblkid when
sending both the metadnode and normal dnodes which are
needed in order to ensure that we are correctly maintaining
the portable objset MAC.
This patch zero's out the offending fields when computing
the bp MAC and ensures that these MACs are always
calculated in little endian order (regardless of the host
system's byte order). This patch also registers an errata
for the old on-disk format, which we detect by adding a
"version" field to newly created DSL Crypto Keys. We allow
datasets without a version (version 0) to only be mounted
for read so that they can easily be migrated. We also now
include dn_maxblkid in raw send streams to ensure the MAC
can be maintained correctly.
This patch also contains minor bug fixes and cleanups.
Reviewed-by: Jorgen Lundman <lundman@lundman.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Tom Caputi <tcaputi@datto.com>
Closes #6845
Closes #6864
Closes #7052
Reviewed-by: Fabian Grünbichler <f.gruenbichler@proxmox.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: András Korn <korn-github.com@elan.rulez.org>
Closes #7096
projects / zfs / log