Dmitry V. Levin [Wed, 21 Feb 2018 23:03:27 +0000 (23:03 +0000)]
m68k: fix build
When <sys/reg.h> is included after <linux/ptrace.h>, the build fails
on m68k with the following diagnostics:
In file included from /usr/include/linux/ptrace.h:101:0,
from ptrace.h:51,
from sigreturn.c:2:
/usr/include/m68k-linux-gnu/sys/reg.h:26:3: error: expected identifier
before numeric constant
PT_D1 = 0,
^
Apparently, the only architecture where strace needs definitions
provided by <sys/reg.h> is x86_64, other three (m68k, tile, and x86)
are fine with definitions already provided by <linux/ptrace.h>.
Fix the issue by getting rid of <sys/reg.h> and defining necessary
macros in linux/x86_64/arch_regs.h file.
* configure.ac (AC_CHECK_HEADERS): Remove sys/reg.h.
* regs.h: Do not include <sys/reg.h>.
* linux/x86_64/arch_regs.h (R15, R14, R13, R12, RBP, RBX, R11, R10,
R9, R8, RAX, RCX, RDX, RSI, RDI, ORIG_RAX, RIP, CS, EFLAGS, RSP, SS,
FS_BASE, GS_BASE, DS, ES, FS, GS): New macros.
* NEWS: Mention this fix.
Dmitry V. Levin [Thu, 15 Feb 2018 11:07:03 +0000 (11:07 +0000)]
Demote sourceforge.net
https://sourceforge.net/p/strace/code/ is defunct: it doesn't accept
new commits for too long.
Likewise, https://sourceforge.net/projects/strace/files/ doesn't accept
new files for too long.
* README.md: Remove sourceforge.net URL.
* debian/copyright: Replace the sourceforge.net based strace project URL
with a github based one.
* strace.spec.in (Source): Likewise.
tests: avoid ioctl_kvm_run test failure when built with gcc -O0
When built with -O0, gcc (rightfully) generates function prologue, which
results in writing %rbp to the stack, causing premature KVM_EXIT_MMIO.
It could be possible to avoid such problems by "naked" attribute but,
unfortunately, the latter is not available on x86 with older GCC.
A trick suggested in [1] is used instead: assembly is moved
to the global scope.
* tests/ioctl_kvm_run.c (code): Remove function.
Add globally scoped __asm__ with the function code and its size.
(code, code_size): New extern symbols declarations.
(run_kvm): Remove code_size definition and initialization.
Co-Authored-by: Dmitry V. Levin <ldv@altlinux.org>
Recent glibc (since version 2.26) uses accept4 syscall for implementing
accept call on sparc. Unfortunately, it's impossible to simply fall
back on raw syscall as it had not been wired up until linux commit
v4.4-rc8~4^2~1.
* tests/accept_compat.h: New file.
* tests/Makefile.am (EXTRA_DIST): Add it.
* tests/net-y-unix.c: Include accept_compat.h, use do_accept()
instead of accept() calls.
* tests/net-yy-inet.c: Likewise.
* tests/net-yy-unix.c: Likewise.
* tests/net.expected: Allow accept4.
* xlat/pkey_access.in (PKEY_DISABLE_EXECUTE): New constant introduced
by linux kernel commit v4.16-rc1~93^2~85.
* tests/pkey_alloc.c: Update expected output.
* NEWS: Mention it.
* linux/powerpc/syscallent.h [384..386]: Add pkey_alloc,
pkey_free, and pkey_mprotect syscalls introduced by linux kernel
commits v4.16-rc1~93^2~70 and v4.16-rc1~93^2~69, respectively.
* linux/powerpc64/syscallent.h: Likewise.
* NEWS: Mention it.
Dmitry V. Levin [Sun, 11 Feb 2018 00:26:09 +0000 (00:26 +0000)]
Include <sys/ptrace.h> early
Include "ptrace.h" before any header that can include <signal.h>
because on some architectures the latter may include <asm/sigcontext.h>
which in turn may include <asm/ptrace.h> with potentially devastating
effect on <sys/ptrace.h>.
* process.c: Include "ptrace.h" before "regs.h".
* rt_sigframe.c: Likewise.
* sigreturn.c: Include "ptrace.h" before "nsig.h".
* syscall.c: Likewise.
* wait.c: Include "ptrace.h" before <sys/wait.h>.
* strace.c: Include "ptrace.h" before <signal.h>.
* tests/ptrace.c: Likewise.
* tests/test_ucopy.c: Include <sys/ptrace.h> before <signal.h>.
* defs.h (struct inject_data): Change type of rval field to
kernel_ulong_t.
* filter_qualify.c (parse_inject_token): Use string_to_kulong instead of
string_to_uint for rval parsing. Warn if retval is clipped in compat
personality.
* string_to_uint.c (string_to_uint_ex): Change to work with long long.
(string_to_uint): Move it...
* string_to_uint.h (string_to_uint): ...here.
(string_to_uint_upto): Accept long long as max_val, return long long.
(string_to_ulong, string_to_kulong, string_to_ulonglong): New functions,
for completeness.
Co-Authored-by: Dmitry V. Levin <ldv@altlinux.org>
syscall_name() is used only in printsiginfo.c:print_si_info currently,
and is supplied with raw syscall number (that's why it has this ugly
__X32_SYSCALL_BIT hack). But since it handled only __X32_SYSCALL_BIT and
not shuffle_scno(), it was broken on ARM. Let's replace it with shuffle_scno
call, as it handles both the case of shuffled ARM syscalls and the
__X32_SYSCALL_BIT.
* syscall.c (syscall_name): Call shuffle_scno instead of custom
__X32_SYSCALL_BIT handling.
While we are here, let's fix AArch64 by limiting scno shuffling
to compat personality only.
* syscall.c: Include shuffle_scno.c.
(shuffle_scno): Move it to a...
* linux/arm/shuffle_scno.c: New file.
* linux/aarch64/shuffle_scno.c: New file, define arm's shuffle_scno
as arm_shuffle_scno and call it only for personality 1.
* linux/shuffle_scno.c: New file, fallback trivial shuffle_scno
definition.
* Makefile.am (EXTRA_DIST): Add them.
tests/accept.c: call accept syscall directly, if available
* tests/accept.c [__NR_accept && !TEST_SYSCALL_NAME]: Define a wrapper that
calls accept directly.
* tests/sockname.c [TEST_SYSCALL_STR]: Do not define TEST_SYSCALL_STR.
strace.1.in (.SH HISTORY): Some amendments based on
https://github.com/strace/strace-talks/blob/master/2012-ossdevconf-obninsk-strace_from_upstream_PoV/ossdevconf_2012-slides-strace_from_upstream_PoV.tex
Dmitry V. Levin [Wed, 7 Feb 2018 12:32:57 +0000 (12:32 +0000)]
tests: rewrite net-accept-connect.c without strncpy
gcc8 -Wall -Werror rejects our method of struct sockaddr_un.sun_path
initialization because the field lacks __nonstring__ attribute.
As we calculate the length of the string being copied anyway,
workaround this gcc+glibc bug by changing the code to use this
pre-calculated length and get rid of strncpy completely.
* tests/net-accept-connect.c (main): Use memcpy to initialize sun_path.
Dmitry V. Levin [Fri, 2 Feb 2018 19:39:23 +0000 (19:39 +0000)]
Use kernel's fcntl.h header instead of libc's for open_mode_flags
As definitions of O_* macros provided by various libc implementations
are usually less reliable than those provided by kernel headers, switch
to use kernel's fcntl.h header.
* open.c: Include <asm/fcntl.h> instead of <fcntl.h>. Remove
O_LARGEFILE fallback definitions assuming that the kernel headers
provide them.
* xlat/open_mode_flags.in: Add __O_SYNC after O_SYNC. Add O_TMPFILE
and __O_TMPFILE before O_DIRECTORY. Remove "O_TMPFILE & ~O_DIRECTORY".
* tests/open.c: Include <asm/fcntl.h> instead of <fcntl.h>. Remove
workarounds for libc O_TMPFILE implementations.
* tests/openat.c: Include <asm/fcntl.h> instead of <fcntl.h>.
(test_mode_flag): New function.
(main): Use it to check decoding of all access modes and file flags.
* tests/gen_tests.in (openat): Add -a option.
Dmitry V. Levin [Sun, 4 Feb 2018 00:22:01 +0000 (00:22 +0000)]
xlat: update TCP_* constants
* xlat/socktcpoptions.in: Add TCP_FASTOPEN_KEY and
TCP_FASTOPEN_NO_COOKIE introduced by linux kernel commits
v4.15-rc1~84^2~387 and v4.15-rc1~84^2~339, respectively.
* NEWS: Mention this.
Dmitry V. Levin [Fri, 2 Feb 2018 00:21:16 +0000 (00:21 +0000)]
xlat: update MAP_* constants
* xlat/mmap_flags.in: Add MAP_SHARED_VALIDATE and MAP_SYNC introduced
by linux kernel commits v4.15-rc1~71^2^2~23 and v4.15-rc1~71^2^2~12,
respectively.
* NEWS: Mention this.
Because there are never enough print_quoted_string flags.
* defs.h (QUOTE_EMIT_COMMENT): New quoting flag macro constant.
* util.c (string_quote): Emit " /* " in the beginning and " */" in the
end if QUOTE_EMIT_COMMENT is passed.
(print_quoted_string): Increase alloc_size by 7 if QUOTE_EMIT_COMMENT is
passed.
tests: make ioctl.test more flexible, use it for the rest of ioctl tests
As the remaining non-generated ioctl tests differ from ioctl.test only
in strace options, and since gen_tests.sh can pass arguments to sourced
tests, replace the remaining non-generated ioctl tests with invocations
of ioctl.test with appropriate parameters.
* tests/ioctl.test: Pass script arguments to the strace invocation.
* tests/gen_tests.in (ioctl_dm): New entry, invoke ioctl.test with -s9.
(ioctl_dm-v): New entry, invoke ioctl.test with -v -s9.
(ioctl_kvm_run): New entry, invoke ioctl.test with -a36 -y.
(ioctl_loop-nv): New entry, invoke ioctl.test with -a22 -e verbose=none.
(ioctl_nsfs): New entry, invoke ioctl.test with -esignal=none.
(ioctl_sock_gifconf): New entry, invoke ioctl.test with -a28 -s1.
(ioctl_evdev-v, ioctl_loop-v, ioctl_rtc-v): Invoke ioctl.test
with -v option instead of ioctl-v.sh.
* tests/ioctl_dm-v.test: Remove.
* tests/ioctl_dm.test: Likewise.
* tests/ioctl_kvm_run.test: Likewise.
* tests/ioctl_loop-nv.test: Likewise.
* tests/ioctl_nsfs.test: Likewise.
* tests/ioctl_sock_gifconf.test: Likewise.
* tests/ioctl-v.sh: Likewise.
* tests/Makefile.am (DECODER_TESTS, EXTRA_DIST): Remove them.
tests/gen_tests.sh: enable passing arguments to sourced tests
* tests/gen_tests.sh: Read first argument separately, put it in $arg0,
and the rest of the arguments in $args.
(case "$arg0" in) <+*)>: Set command line to $args and source $arg0.
Dmitry V. Levin [Thu, 25 Jan 2018 01:55:08 +0000 (01:55 +0000)]
Drop non-functional CRIS architecture support
From the very first commit when CRIS architecture support was introduced
and up to this comment that ends the agony of this non-functional code,
this support was incomplete and could never be compiled.
* futex.c (VALP, VALP_PR, VAL2P, VAL2P_PR): New macro definitions.
(main): Allow EINVAL on *REQUEUE* checks with VAL/VAL2 with higher bit
being set, check that the existing behaviour preserved with VALP/VAL2P
where higher bit is unset.
We (apparently) had a long-standing test failure inside strace-ff.test
with the symptom that it misses exit_group call. As it turned out, it
was PTRACE_EVENT_EXEC followed by execve syscall exiting stop. That
behaviour indeed screwed all the syscall state tracking for the tracee.
Let's try to patch it up by calling trace_syscall when we receive
PTRACE_EVENT_EXEC outside syscall.
* defs.h (TCB_RECOVERING): New tcb flag.
* strace.c (dispatch_event) <case TE_STOP_BEFORE_EXECVE>: Invoke
trace_syscall with TCB_RECOVERING flag being set for the current_tcp
if the tracee is not on exiting syscall.
* syscall.c (get_scno): Set QUAL_RAW if we are recovering.
(tamper_with_syscall_entering): Do not perform actual tampering during
recovery as it's already too late.
* NEWS: Mention it.
Co-Authored-by: Dmitry V. Levin <ldv@altlinux.org>
Dmitry V. Levin [Wed, 24 Jan 2018 01:56:15 +0000 (01:56 +0000)]
tests: robustify set_ptracer_any
* tests/set_ptracer_any.c (main) [HAVE_PRCTL]: Provide fallback
definitions for PR_SET_PTRACER and PR_SET_PTRACER_ANY constants,
set all unused prctl arguments to 0.
Dmitry V. Levin [Wed, 24 Jan 2018 01:56:15 +0000 (01:56 +0000)]
ia64: do not bail out in get_syscall_args if umove fails with EPERM
If the kernel contains commit 84d77d3f06e7e8dea057d10e8ec77ad71f721be3,
both PTRACE_PEEKDATA and process_vm_readv become unavailable when the
process dumpable flag is cleared, on ia64 this results to all syscall
arguments being unavailable.
Recognize this situation and do not treat it as get_syscall_args error
because the latter leaves the tracee in a ptrace stop.
This condition used to be triggered by prctl-dumpable test that caused
strace to hang indefinitely.
* linux/ia64/get_syscall_args.c (get_syscall_args): Do not bail out
if umove fails.
* tests/prctl-dumpable.c [__ia64__]: Skip the test.
print_event_exit should have printing_tcp setup analogous to printleader and
syscall_exit_trace before printing its part, otherwise it spuriously resets
curcol in line_ended for the stale printing_tcp if followfork == 2.
* strace.c (print_event_exit): Set printing_tcp to tcp before printing
exiting event line and calling line_ended.
Dmitry V. Levin [Tue, 23 Jan 2018 01:06:09 +0000 (01:06 +0000)]
tests: check path tracing of select/_newselect syscalls
* tests/xselect.c (main) [PATH_TRACING_FD]: Skip if /proc/self/fd/
is not available. Add test calls that use PATH_TRACING_FD.
(main): Conditionalize expected output for those calls
that do not use PATH_TRACING_FD with [!PATH_TRACING_FD].
* tests/_newselect-P.c: New file.
* tests/select-P.c: Likewise.
* tests/Makefile.am (check_PROGRAMS): Add _newselect-P and select-P.
* tests/.gitignore: Likewise.
* tests/gen_tests.in (_newselect-P, select-P): New entries.