tests: slabinfo should not be too strict about slab names
Before this commit, the test checking `vmstat -m` (slabinfo) output uses
a fairly strict regular expression that only allows alphanumeric
characters and a few exceptions such as "_", "-", "(" and ")".
However, recent kernels use a wider range of characters, such as ">".
For instance, see this Linux commit which creates a "page->ptl" slab:
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/mm/memory.c?id=b35f1819acd9243a3ff7ad25b1fa8bd6bfe80fb2#n4283
Other patches for reporting slab usage per memcg include the names of
the cgroup in the slabinfo output, which can include additional
characters and use dots for abbreviation.
The check should not be so string, instead it could simply look for a
chain of non-whitespace characters and that should be enough.
Tested that `make check` is still working, including in some of the
environments where features that enable the additional slabinfo names.
Signed-off-by: Filipe Brandenburger <filbranden@google.com> Signed-off-by: Craig Small <csmall@enc.com.au>
tests: fix regexp in ps_sched_batch.exp to match in first line
The current regexp checks for a \s+ in the beginning, however that will
only match if there is a \n in the `ps` output before test-schedbatch,
but that will not happen if test-schedbatch is the first process in the
list, which happens if the PID of test-schedbatch is low enough to bring
it up in the sorted list.
Fix it by enabling newline-sensitive matching with (?n) which then
allows using ^ and $ anchors in the regexp (including an optional \r
introduced by expect.) Matching the end of line also improves checking
that the last field matches 18 exactly and not something like 181, etc.
Tested that `make check` does not break and also fixed the flakiness
seen in an environment with few processes running under the test user
which made the issue more frequent.
Signed-off-by: Filipe Brandenburger <filbranden@google.com> Signed-off-by: Craig Small <csmall@enc.com.au>
Right now the test case is both testing it (expect_pass "$test") and
marking it as untested (untested "$test"), it should do either one or
the other, so stop marking it as untested.
Before this change, these lines appear in testsuite/ps.log or the output
of `make check RUNTESTFLAGS="--all"`:
Craig Small [Sat, 9 May 2015 07:53:08 +0000 (17:53 +1000)]
pgrep SID=1 is valid
On most systems the only process with a SID=1 is init
and certainly not a test sleep. On docker systems this
test program IS on SID=1 and so our "impossible SID" becomes
possible.
build-sys: install binaries in bindir (get rid of usrbin_execdir)
The "usrbin_execdir" hack meant to install some binaries in /bin and
others in /usr/bin. However:
- It is very inflexible: not much control on the final directory name
and it is not possible to get rid of the usr/bin suffix without
patching the build system.
- It is hard to use: it requires configure to receive --exec_prefix=/
and other settings do not make much sense. It is not very obvious that
that setting needs to be passed and it takes a while to figure it out.
- It produces garbage with the default setup: the default prefix of
/usr/local ends up installing the binaries under /usr/local/usr/bin
which does not make any sense.
Furthermore, the requirement to split binaries in /bin and /usr/bin is
not that strong since some distributions adopted the /usr merge and so
would agree to just deploy all binaries to /usr/bin directly.
Distributions that would still like to split /bin from /usr/bin should
actually move binaries such as `ps` and `kill` to /bin after the install
of procps-ng is complete. After all, they are the ones responsible for
determining what are the binaries that need to be in the root partition
and that list depends on their early boot init scripts, so it is
possible that the list must be augmented with other binaries from this
package.
Therefore, I propose here to get rid of that hack and simply install all
the binaries to bindir instead, which solves the problems described
above and simplifies the build and install of procps-ng.
Tested that it builds and both `make check` and `make distcheck` work.
Tested that `make install` works and produces the expected tree, the
only difference being the absence of the bogus /usr/local/usr/bin
directory and now all binaries are merged into /usr/local/bin as
expected.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Otherwise, automake 1.14 will warn that this option will become the
default in an upcoming release, which will cause problems for the
procps-ng build.
Now that the automake rules were merged in the top level Makefile.am,
it is possible to enable "subdir-objects" without breaking the build or
the dist.
Tested that it builds and both `make check` and `make distcheck` work.
Tested that `make install` works and produces the same tree before and
after this change. Confirmed that binaries are also placed in the same
locations in the build tree.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
This will be required for subdir-objects, otherwise automake will have
problems with more than one Makefile.am having rules to build the same
files.
Tested that it builds and both `make check` and `make distcheck` work.
Tested `make install` and compared the tree with the one installed
before this commit, both installed the binaries to the same locations.
The binaries are also in the same location in the build tree (for
instance, ps/pscommand is still there.)
Checked the binaries for the correct libraries linked into them. Binary
sizes matched before and after this change.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
build-sys: drop unneeded $(top_srcdir) from source paths
This is cleaner and we need to match paths exactly when we enable the
subdir-objects automake option.
Out-of-tree builds still work since automake is smart to know these are
source files and that it needs to look for them in $(top_srcdir), so
there is no need to make this explicit.
Tested that it builds and both `make check` and `make distcheck` work.
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
build-sys: split test cases in lib/ into their own files
In order to avoid compiling the same source files twice, with and
without the TEST_PROGRAM define.
Tested that the build still works and that `make distcheck` works as
expected.
Tested that the test_* programs in lib/ keep working. (Though they are
not really invoked by `make check` and in particular test_nsutils is
quite useless, test_fileutils also quite poor.)
Signed-off-by: Filipe Brandenburger <filbranden@google.com>
Craig Small [Fri, 3 Apr 2015 08:18:58 +0000 (19:18 +1100)]
free: Use IEC units
Free always used 1024 based units but used the confusing old style
kilo,mega etc.
This change changes the names to kibi,mebi for 1024 based divisors
and kilo,mega for 1000 based divisors or IEC units.
It also checks if you try to set two units, e.g free -k -m
Petabyte and Pebibyte have been added.
If you used to use the long options such as --mega these will now
actually print megabytes (they previously printed mebibytes).
The short options are being used on the IEC units
The loop that parses options has a of by one bug where the realloc
adds one byte, instead of one list element. This is exposed when
you try things like:
pgrep -t,,,,
Craig Small [Tue, 17 Mar 2015 11:43:22 +0000 (22:43 +1100)]
pgrep.1 removed STANDARDS section
pgrep got updated due to the confusion of the f,l and a flags.
While the newer behaviour is far better but it is no longer following
the ancient Solaris standards, so that got removed.
Jaromir Capik [Mon, 2 Mar 2015 17:41:07 +0000 (18:41 +0100)]
w: fixing missing '-' in the FROM field when empty
With 99bebff06a058f1ebf794fca1b358d0df73fdd35 a configurable
width of the FROM column was introduced. Unfortunately this
caused a regression in the dash printing. Hopefully fixed
with this commit.
Craig Small [Sat, 24 Jan 2015 07:53:29 +0000 (18:53 +1100)]
pmap: print process even if smaps unreadable
pmap would previously print the process name if
/proc/PID/smaps could be opened, even if subsequent
reads failed. This actually occurs with other users
PIDs.
Kernel 3.18rc1 introduced a change where the file could
not been opened, meaning pmap -X 1 previously showed
the process name and nothing else but NOW shows nothing
make check failed because of this.
This change prints the process name even before trying to open
the file, returning it to previous behaviour.
Thanks to Vincent Bernat for some analysis.
Derek Fawcus [Thu, 15 Jan 2015 13:14:53 +0000 (13:14 +0000)]
'slabtop -o' with stdin not a tty would complain
When the command is executed in one shot mode (-o) with stdin
being something other than a terminal, the tcgetattr() call
would fail, and generate an error message. e.g.:
slabtop: terminal setting retrieval: Inappropriate ioctl for device
Active / Total Objects (% used) : 905319 / 915886 (98.8%)
Craig Small [Sat, 24 Jan 2015 06:11:11 +0000 (17:11 +1100)]
skill: fix command line with signal
If skill was used with a signal number then it would intepret
the command line with last option interpreted twice. This often
confused the program so it just would end up killing nothing.
So this would work:
skill -t pts/0
This would not:
skill -9 -t pts/0
The kill path (in the same file) uses the same logic that has
been introduced here.
Jim Warner [Tue, 28 Oct 2014 05:00:00 +0000 (00:00 -0500)]
top: tweak forest view protections for forking anomaly
A recent commit eliminated the potential for a storage
violation with forest view mode. It occurred when some
program (erroneously?) created a lengthy forking loop.
However, the associated commit message was misleading.
The message implied that an unexpected order following
a sort on start_time was the cause of storage overruns
and a 'char' used to track nesting level only distorts
the display when it goes negative. Actually, the truth
is really just the opposite. Any start_time sort quirk
causes no harm while that 'char' can yield corruption.
Should some child end up sorted ahead of its parent by
way of an extremely unlikely shared start_time the end
result is such a child will be displayed unnested just
like init or kthreadd along with all its own children.
However, if nesting levels exceeded 255 (and became 0)
a massive array overrun could be triggered when such a
task and *all* its children were added to an array for
the second time. Exactly how much storage was violated
depended on the number of children that zeroed process
had spawned (hinted at via either SIGSEGV or SIGABRT).
The earlier commit limited nested levels to 100 so the
root cause of the storage violation was already fixed.
The potential for distorted nesting levels due to sort
on start_time would seem to remain. But it's extremely
unlikely that 2 tasks would share the same start_time.
Even so, a new #define has been introduced which makes
top impervious to the order of tasks such that a qsort
is no longer necessary (providing an init/systemd task
exists & was harvested as the first task by readproc).
It can be utilized if distorted nesting ever becomes a
real issue. But since there is a 5-10% performance hit
with that, we'll continue using start_time as default.
Jim Warner [Thu, 23 Oct 2014 05:00:00 +0000 (00:00 -0500)]
top: provide some protection against forking anomalies
This commit will eliminate a very nasty bug associated
with top's forest view mode. It addresses a potential
SIGSEGV/SIGABRT that was only encountered when another
program (erroneously?) creates a lengthy forking loop.
If the growing list of nested children is sufficiently
fast such that proc_t start_time is duplicated between
children then the sort upon which top relies might not
produce the expected order. That, in turn, could cause
the forest_adds function to initially miss some child.
But that missed child would be caught by forest_create
and eventually would cause our array boundary overrun.
Such overrun occurs when some child of that originally
*missed* child is found and a duplicate add attempted.
In correcting this bug we'll also use this opportunity
to prohibit a borrowed proc_t padding byte (char) from
going negative. If the nesting level exceeded 127, the
effect was an "unnesting" with the snprintf width then
viewed as flag+width also yielding left justification.
Henceforth, we'll limit nesting to 100 with subsequent
children shown as " + ", not the usual " `- " prefix.
When startup defaults were changed users with existing
rcfiles would likely find their previous configuration
was not being honored in all respects. The disparities
involved Graphs modes and Summary/Task memory scaling.
This patch simply restores what was always intended as
the proper behavior for previously saved config files.
References(s):
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=762928
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=762947
. new startup defaults
commit 8ef6cd91fc5df6372a93bc4a37cbad34ead9654e
Signed-off-by: Jim Warner <james.warner@comcast.net>
Previously the default background color was expected
to be always black and the default foreground color
was expected to be always white. This commit extends
the group of color pairs with pairs containing default
colors.
Michael Forney [Tue, 1 Oct 2013 05:34:36 +0000 (05:34 +0000)]
Support libc's without GLOB_TILDE
GLOB_TILDE is a GNU extension and may not be present on all systems.
Note (jcapik): The original patch from Michael Forney didn't
apply cleanly due to my recent addition of the GLOB_BRACE flag
in the list of flags. I had to edit the patch to make it apply,
but that produces an inconsistent state. It's gonna be fixed
in the next commit.
Jim Brown IV [Sat, 7 Jun 2014 00:31:02 +0000 (17:31 -0700)]
tload: fix lockup
It looks like an off by one error was added to tload a couple years
ago while removing goto statements. This causes tload to go into
an endless loop when the load is just under a scale change integer.
eg: .99, 1.99, 3.99, 7.99
to reproduce you can add, just under the loadavg at line 170 in tload.c:
av[0] = 1.99;
or get the load to that level separately.
The patch below makes the code more like the original, but without the
goto statements. This can also be fixed by just changing line 183 in
tload.c from "if (0 < row)" -> "if (0 <= row)".
Jaromir Capik [Tue, 26 Aug 2014 13:24:55 +0000 (15:24 +0200)]
library: fixing stdio.h include position in nsutils.c
The previous commit removes the stdio_ext.h header,
but the ns_read function calls snprintf that needs
stdio.h and therefore moving the stdio.h include
from the bottom test program to the top line.
Sean Silva [Fri, 18 Oct 2013 06:04:15 +0000 (02:04 -0400)]
watch: Fix handling of ANSI color escapes for -c
The previous code assumed that there would be 1 or 2 attributes to
apply. In fact, there can in general be any number (but typically
between 1 and 3). This commit generalizes the existing code to read
arbitrarily many attributes from the escape sequence.
Jaromir Capik [Wed, 20 Aug 2014 11:21:22 +0000 (13:21 +0200)]
free: fixing the layout broken with the -w introduction
For some reason I thought the columns are left justified
and consequently modified the header incorrectly when
implementing the -w/--wide feature.
With this commit the column width was increased by 1
so that the default layout is 79 characters wide
and allows to display 11 digits per column.
Jim Warner [Thu, 7 Aug 2014 05:00:00 +0000 (00:00 -0500)]
top: swat a potential buglet affecting new graph modes
This patch will cure a potential aberration associated
with a terminal's size (SIGWINCH) and top's new graphs
modes. The symptoms were a dangling tilde (~) plus the
potential loss of a graph's right-most visual content.
The condition was only apparent when a %Cpu approached
100% usage. Also the apparent loss of content affected
the 'block' graph only. With 'bar' graphs, that affect
became the loss of proper right-most bar graph colors.
The cause was determined to be a combination of: 1) an
unnecessary snprintf precision specification; and 2) a
rounding quirk for any graphs which displayed distinct
types of information (as for user/syst, used/unavail).
These could then combine to produce an extra bar/block
which, in turn, resulted in the truncation of a pseudo
termcap attribute used by the show_special() function.
What was originally interpreted as an intractable race
condition turns out to be just a self inflicted wound.
With introduction of the 'available' column
and with the latest changes in the 'used' evaluation
the -/+ buffers/cache line became redundant.
The first value duplicates the 'used'
column and the second value has a more accurate
brother called 'available'.
This renames the --available switch
to the --wide switch and changes the default
layout so that it includes the 'available'
column and joins buffers and cache into
a common column called 'buff/cache'.
Jim Warner [Sat, 19 Jul 2014 09:44:44 +0000 (04:44 -0500)]
library: evolve MenAvailable algorithm on older kernel
Let's not report zero for kb_main_available when older
kernels don't have MemAvailable. Instead, if we simply
duplicate the 'free' amount we can avoid all ancillary
problems, such as those involving top's graphing mode.
Jim Warner [Thu, 17 Jul 2014 18:13:13 +0000 (13:13 -0500)]
top: exploit new kb_main_available, make Jaromir happy
This patch will trade a former pessimistic calculation
of free physical memory for a more optimistic one that
uses the newly added kb_main_available library export.
But in case one might wish to return to the old former
method, there's a new #define that was made available.
[ the new calculation will affect graphing mode only ]
Jim Warner [Thu, 17 Jul 2014 17:12:12 +0000 (12:12 -0500)]
top: trade Page_size for that newly exposed page_bytes
Might as well use the newly exposed sysinfo.h variable
'page_bytes' rather than our own. Plus, in the process
we can avoid incurring yet one more function call hit.
Signed-off-by: Jim Warner <james.warner@comcast.net>
This commit just ensures recalculation of some amounts
for iterative processes, like top. It also trades some
repeated runtime calls to sysconf for a one time cost.
Jim Warner [Wed, 16 Jul 2014 05:00:00 +0000 (00:00 -0500)]
library: disable a potential 'ELF note' is missing msg
The stderr message regarding ELF notes appears on some
systems (openSUSE-13.1 for example) but I have not yet
isolated why. Since at startup we go on to determine a
Hertz value the old fashion way, this patch just turns
off the useless message until the cause is understood.
Signed-off-by: Jim Warner <james.warner@comcast.net>
sysctl: support expansion of csh style braces with -p
This commit adds the GLOB_BRACE flag in the glob flags.
That allows to expand the csh style braces {a,b} and
define multiple independent patterns for config file
locations.
library: fallback MemAvailable evaluation if missing
This commit adds support for fallback calculation
of the MemAvailable field if not exported by the
kernel. The MemAvailable field appeared in kernel
3.14, but it's possible to calculate it from other
fields since 2.6.27 (splitLRU changes).
projects / procps-ng / log