From: Brian Pane Date: Wed, 20 Mar 2002 05:54:26 +0000 (+0000) Subject: This commit was generated by cvs2svn to compensate for changes in r8100, X-Git-Url: https://granicus.if.org/sourcecode?a=commitdiff_plain;h=f5c1ec7dfa35237d8860e4c3096cef608eb5e275;p=apache This commit was generated by cvs2svn to compensate for changes in r8100, which included commits to RCS files with non-trunk default branches. git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@94037 13f79535-47bb-0310-9956-ffa450edef68 --- diff --git a/srclib/pcre/AUTHORS b/srclib/pcre/AUTHORS index bfe1b5d8a4..832dddca45 100644 --- a/srclib/pcre/AUTHORS +++ b/srclib/pcre/AUTHORS @@ -3,4 +3,4 @@ Written by: Philip Hazel University of Cambridge Computing Service, Cambridge, England. Phone: +44 1223 334714. -Copyright (c) 1997-2000 University of Cambridge +Copyright (c) 1997-2001 University of Cambridge diff --git a/srclib/pcre/COPYING b/srclib/pcre/COPYING index f305033c16..8effa66492 100644 --- a/srclib/pcre/COPYING +++ b/srclib/pcre/COPYING @@ -9,7 +9,7 @@ Written by: Philip Hazel University of Cambridge Computing Service, Cambridge, England. Phone: +44 1223 334714. -Copyright (c) 1997-2000 University of Cambridge +Copyright (c) 1997-2001 University of Cambridge Permission is granted to anyone to use this software for any purpose on any computer system, and to redistribute it freely, subject to the following @@ -20,13 +20,31 @@ restrictions: MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. + explicit claim or by omission. In practice, this means that if you use + PCRE in software which you distribute to others, commercially or + otherwise, you must put a sentence like this + + Regular expression support is provided by the PCRE library package, + which is open source software, written by Philip Hazel, and copyright + by the University of Cambridge, England. + + somewhere reasonably visible in your documentation and in any relevant + files or online help data or similar. A reference to the ftp site for + the source, that is, to + + ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/ + + should also be given in the documentation. 3. Altered versions must be plainly marked as such, and must not be misrepresented as being the original software. 4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. + General Purpose Licence (GPL), or Lesser General Purpose Licence (LGPL), + then the terms of that licence shall supersede any condition above with + which it is incompatible. + +The documentation for PCRE, supplied in the "doc" directory, is distributed +under the same terms as the software itself. End diff --git a/srclib/pcre/INSTALL b/srclib/pcre/INSTALL index d63a78fef9..08802812de 100644 --- a/srclib/pcre/INSTALL +++ b/srclib/pcre/INSTALL @@ -4,7 +4,7 @@ Basic Installation These are generic installation instructions that apply to systems that can run the `configure' shell script - Unix systems and any that imitate it. They are not specific to PCRE. There are PCRE-specific instructions -for non-Unix systems in the file NON-UNIX. +for non-Unix systems in the file NON-UNIX-USE. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses diff --git a/srclib/pcre/NEWS b/srclib/pcre/NEWS index 4c80bd6833..27866b68a2 100644 --- a/srclib/pcre/NEWS +++ b/srclib/pcre/NEWS @@ -1,6 +1,45 @@ News about PCRE releases ------------------------ +Release 3.5 15-Aug-01 +--------------------- + +1. The configuring system has been upgraded to use later versions of autoconf +and libtool. By default it builds both a shared and a static library if the OS +supports it. You can use --disable-shared or --disable-static on the configure +command if you want only one of them. + +2. The pcretest utility is now installed along with pcregrep because it is +useful for users (to test regexs) and by doing this, it automatically gets +relinked by libtool. The documentation has been turned into a man page, so +there are now .1, .txt, and .html versions in /doc. + +3. Upgrades to pcregrep: + (i) Added long-form option names like gnu grep. + (ii) Added --help to list all options with an explanatory phrase. + (iii) Added -r, --recursive to recurse into sub-directories. + (iv) Added -f, --file to read patterns from a file. + +4. Added --enable-newline-is-cr and --enable-newline-is-lf to the configure +script, to force use of CR or LF instead of \n in the source. On non-Unix +systems, the value can be set in config.h. + +5. The limit of 200 on non-capturing parentheses is a _nesting_ limit, not an +absolute limit. Changed the text of the error message to make this clear, and +likewise updated the man page. + +6. The limit of 99 on the number of capturing subpatterns has been removed. +The new limit is 65535, which I hope will not be a "real" limit. + + +Release 3.3 01-Aug-00 +--------------------- + +There is some support for UTF-8 character strings. This is incomplete and +experimental. The documentation describes what is and what is not implemented. +Otherwise, this is just a bug-fixing release. + + Release 3.0 01-Feb-00 --------------------- diff --git a/srclib/pcre/NON-UNIX-USE b/srclib/pcre/NON-UNIX-USE index 09a743245b..14b1cc0d05 100644 --- a/srclib/pcre/NON-UNIX-USE +++ b/srclib/pcre/NON-UNIX-USE @@ -9,7 +9,10 @@ commands to do the following: (1) Copy or rename the file config.in as config.h, and change the macros that define HAVE_STRERROR and HAVE_MEMMOVE to define them as 1 rather than 0. Unfortunately, because of the way Unix autoconf works, the default setting has -to be 0. +to be 0. You may also want to make changes to other macros in config.h. In +particular, if you want to force a specific value for newline, you can define +the NEWLINE macro. The default is to use '\n', thereby using whatever value +your compiler gives to '\n'. (2) Copy or rename the file pcre.in as pcre.h, and change the macro definitions for PCRE_MAJOR, PCRE_MINOR, and PCRE_DATE near its start to the values set in diff --git a/srclib/pcre/README b/srclib/pcre/README index 90aaf4d6a6..7557374791 100644 --- a/srclib/pcre/README +++ b/srclib/pcre/README @@ -7,30 +7,73 @@ The latest release of PCRE is always available from Please read the NEWS file if you are upgrading from a previous release. +PCRE has its own native API, but a set of "wrapper" functions that are based on +the POSIX API are also supplied in the library libpcreposix. Note that this +just provides a POSIX calling interface to PCRE: the regular expressions +themselves still follow Perl syntax and semantics. The header file +for the POSIX-style functions is called pcreposix.h. The official POSIX name is +regex.h, but I didn't want to risk possible problems with existing files of +that name by distributing it that way. To use it with an existing program that +uses the POSIX API, it will have to be renamed or pointed at by a link. + + +Contributions by users of PCRE +------------------------------ + +You can find contributions from PCRE users in the directory + + ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/Contrib + +where there is also a README file giving brief descriptions of what they are. +Several of them provide support for compiling PCRE on various flavours of +Windows systems (I myself do not use Windows). Some are complete in themselves; +others are pointers to URLs containing relevant files. + Building PCRE on a Unix system ------------------------------ -To build PCRE on a Unix system, run the "configure" command in the PCRE -distribution directory. This is a standard GNU "autoconf" configuration script, -for which generic instructions are supplied in INSTALL. On many systems just -running "./configure" is sufficient, but the usual methods of changing standard -defaults are available. For example +To build PCRE on a Unix system, first run the "configure" command from the PCRE +distribution directory, with your current directory set to the directory where +you want the files to be created. This command is a standard GNU "autoconf" +configuration script, for which generic instructions are supplied in INSTALL. + +Most commonly, people build PCRE within its own distribution directory, and in +this case, on many systems, just running "./configure" is sufficient, but the +usual methods of changing standard defaults are available. For example, CFLAGS='-O2 -Wall' ./configure --prefix=/opt/local specifies that the C compiler should be run with the flags '-O2 -Wall' instead of the default, and that "make install" should install PCRE under /opt/local -instead of the default /usr/local. The "configure" script builds thre files: +instead of the default /usr/local. + +If you want to build in a different directory, just run "configure" with that +directory as current. For example, suppose you have unpacked the PCRE source +into /source/pcre/pcre-xxx, but you want to build it in /build/pcre/pcre-xxx: + +cd /build/pcre/pcre-xxx +/source/pcre/pcre-xxx/configure + +If you want to make use of the experimential, incomplete support for UTF-8 +character strings in PCRE, you must add --enable-utf8 to the "configure" +command. Without it, the code for handling UTF-8 is not included in the +library. (Even when included, it still has to be enabled by an option at run +time.) +The "configure" script builds five files: + +. libtool is a script that builds shared and/or static libraries . Makefile is built by copying Makefile.in and making substitutions. . config.h is built by copying config.in and making substitutions. . pcre-config is built by copying pcre-config.in and making substitutions. +. RunTest is a script for running tests Once "configure" has run, you can run "make". It builds two libraries called -libpcre and libpcreposix, a test program called pcretest, and the pgrep -command. You can use "make install" to copy these, and the public header file -pcre.h, to appropriate live directories on your system, in the normal way. +libpcre and libpcreposix, a test program called pcretest, and the pcregrep +command. You can use "make install" to copy these, the public header files +pcre.h and pcreposix.h, and the man pages to appropriate live directories on +your system, in the normal way. Running "make install" also installs the command pcre-config, which can be used to recall information about the PCRE configuration and installation. For @@ -46,26 +89,38 @@ outputs information about where the library is installed. This command can be included in makefiles for programs that use PCRE, saving the programmer from having to remember too many details. +There is one esoteric feature that is controlled by "configure". It concerns +the character value used for "newline", and is something that you probably do +not want to change on a Unix system. The default is to use whatever value your +compiler gives to '\n'. By using --enable-newline-is-cr or +--enable-newline-is-lf you can force the value to be CR (13) or LF (10) if you +really want to. + Shared libraries on Unix systems -------------------------------- -The default distribution builds PCRE as two shared libraries. This support is -new and experimental and may not work on all systems. It relies on the -"libtool" scripts - these are distributed with PCRE. It should build a -"libtool" script and use this to compile and link shared libraries, which are -placed in a subdirectory called .libs. The programs pcretest and pgrep are -built to use these uninstalled libraries by means of wrapper scripts. When you -use "make install" to install shared libraries, pgrep and pcretest are -automatically re-built to use the newly installed libraries. However, only -pgrep is installed, as pcretest is really just a test program. - -To build PCRE using static libraries you must use --disable-shared when +The default distribution builds PCRE as two shared libraries and two static +libraries, as long as the operating system supports shared libraries. Shared +library support relies on the "libtool" script which is built as part of the +"configure" process. + +The libtool script is used to compile and link both shared and static +libraries. They are placed in a subdirectory called .libs when they are newly +built. The programs pcretest and pcregrep are built to use these uninstalled +libraries (by means of wrapper scripts in the case of shared libraries). When +you use "make install" to install shared libraries, pcregrep and pcretest are +automatically re-built to use the newly installed shared libraries before being +installed themselves. However, the versions left in the source directory still +use the uninstalled libraries. + +To build PCRE using static libraries only you must use --disable-shared when configuring it. For example ./configure --prefix=/usr/gnu --disable-shared -Then run "make" in the usual way. +Then run "make" in the usual way. Similarly, you can use --disable-static to +build only shared libraries. Building on non-Unix systems @@ -81,28 +136,40 @@ Standard C functions. Testing PCRE ------------ -To test PCRE on a Unix system, run the RunTest script in the pcre directory. -(This can also be run by "make runtest" or "make check".) For other systems, -see the instruction in NON-UNIX-USE. +To test PCRE on a Unix system, run the RunTest script that is created by the +configuring process. (This can also be run by "make runtest", "make check", or +"make test".) For other systems, see the instruction in NON-UNIX-USE. -The script runs the pcretest test program (which is documented in -doc/pcretest.txt) on each of the testinput files (in the testdata directory) in -turn, and compares the output with the contents of the corresponding testoutput -file. A file called testtry is used to hold the output from pcretest. To run -pcretest on just one of the test files, give its number as an argument to -RunTest, for example: +The script runs the pcretest test program (which is documented in the doc +directory) on each of the testinput files (in the testdata directory) in turn, +and compares the output with the contents of the corresponding testoutput file. +A file called testtry is used to hold the output from pcretest. To run pcretest +on just one of the test files, give its number as an argument to RunTest, for +example: RunTest 3 The first and third test files can also be fed directly into the perltest script to check that Perl gives the same results. The third file requires the additional features of release 5.005, which is why it is kept separate from the -main test input, which needs only Perl 5.004. In the long run, when 5.005 is -widespread, these two test files may get amalgamated. - -The second set of tests check pcre_info(), pcre_study(), pcre_copy_substring(), -pcre_get_substring(), pcre_get_substring_list(), error detection and run-time -flags that are specific to PCRE, as well as the POSIX wrapper API. +main test input, which needs only Perl 5.004. In the long run, when 5.005 (or +higher) is widespread, these two test files may get amalgamated. + +The second set of tests check pcre_fullinfo(), pcre_info(), pcre_study(), +pcre_copy_substring(), pcre_get_substring(), pcre_get_substring_list(), error +detection, and run-time flags that are specific to PCRE, as well as the POSIX +wrapper API. It also uses the debugging flag to check some of the internals of +pcre_compile(). + +If you build PCRE with a locale setting that is not the standard C locale, the +character tables may be different (see next paragraph). In some cases, this may +cause failures in the second set of tests. For example, in a locale where the +isprint() function yields TRUE for characters in the range 128-255, the use of +[:isascii:] inside a character class defines a different set of characters, and +this shows up in this test as a difference in the compiled code, which is being +listed for checking. Where the comparison test output contains [\x00-\x7f] the +test will contain [\x00-\xff], and similarly in some other cases. This is not a +bug in PCRE. The fourth set of tests checks pcre_maketables(), the facility for building a set of character tables for a specific locale and using them instead of the @@ -117,14 +184,10 @@ output to say why. If running this test produces instances of the error in the comparison output, it means that locale is not available on your system, despite being listed by "locale". This does not mean that PCRE is broken. -PCRE has its own native API, but a set of "wrapper" functions that are based on -the POSIX API are also supplied in the library libpcreposix.a. Note that this -just provides a POSIX calling interface to PCRE: the regular expressions -themselves still follow Perl syntax and semantics. The header file -for the POSIX-style functions is called pcreposix.h. The official POSIX name is -regex.h, but I didn't want to risk possible problems with existing files of -that name by distributing it that way. To use it with an existing program that -uses the POSIX API, it will have to be renamed or pointed at by a link. +The fifth test checks the experimental, incomplete UTF-8 support. It is not run +automatically unless PCRE is built with UTF-8 support. This file can be fed +directly to the perltest8 script, which requires Perl 5.6 or higher. The sixth +file tests internal UTF-8 features of PCRE that are not relevant to Perl. Character tables @@ -197,7 +260,7 @@ The distribution should contain the following files: NEWS important changes in this release NON-UNIX-USE notes on building PCRE on non-Unix systems README this file - RunTest a Unix shell script for running tests + RunTest.in template for a Unix shell script for running tests config.guess ) files used by libtool, config.sub ) used only when building a shared library configure a configuring shell script (built by autoconf) @@ -211,24 +274,29 @@ The distribution should contain the following files: doc/pcreposix.txt plain text version doc/pcretest.txt documentation of test program doc/perltest.txt documentation of Perl test program - doc/pgrep.1 man page source for the pgrep utility - doc/pgrep.html HTML version - doc/pgrep.txt plain text version + doc/pcregrep.1 man page source for the pcregrep utility + doc/pcregrep.html HTML version + doc/pcregrep.txt plain text version install-sh a shell script for installing files - ltconfig ) files used to build "libtool", - ltmain.sh ) used only when building a shared library - pcretest.c test program + ltmain.sh file used to build a libtool script + pcretest.c comprehensive test program + pcredemo.c simple demonstration of coding calls to PCRE perltest Perl test program - pgrep.c source of a grep utility that uses PCRE + perltest8 Perl test program for UTF-8 tests + pcregrep.c source of a grep utility that uses PCRE pcre-config.in source of script which retains PCRE information testdata/testinput1 test data, compatible with Perl 5.004 and 5.005 testdata/testinput2 test data for error messages and non-Perl things testdata/testinput3 test data, compatible with Perl 5.005 testdata/testinput4 test data for locale-specific tests + testdata/testinput5 test data for UTF-8 tests compatible with Perl 5.6 + testdata/testinput6 test data for other UTF-8 tests testdata/testoutput1 test results corresponding to testinput1 testdata/testoutput2 test results corresponding to testinput2 testdata/testoutput3 test results corresponding to testinput3 testdata/testoutput4 test results corresponding to testinput4 + testdata/testoutput5 test results corresponding to testinput5 + testdata/testoutput6 test results corresponding to testinput6 (C) Auxiliary files for Win32 DLL @@ -236,4 +304,4 @@ The distribution should contain the following files: pcre.def Philip Hazel -February 2000 +August 2001 diff --git a/srclib/pcre/config.guess b/srclib/pcre/config.guess index e1b5871708..ba66165161 100644 --- a/srclib/pcre/config.guess +++ b/srclib/pcre/config.guess @@ -1,8 +1,10 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999 +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 # Free Software Foundation, Inc. -# + +timestamp='2001-04-20' + # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or @@ -23,34 +25,93 @@ # the same distribution terms that you use for the rest of that program. # Written by Per Bothner . -# The master version of this file is at the FSF in /home/gd/gnu/lib. -# Please send patches to . +# Please send patches to . # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and # exits with 0. Otherwise, it exits with 1. # # The plan is that this can be called by configure scripts if you -# don't specify an explicit system type (host/target name). -# -# Only a few systems have been added to this list; please add others -# (but try to keep the structure clean). -# +# don't specify an explicit build system type. -# Use $HOST_CC if defined. $CC may point to a cross-compiler -if test x"$CC_FOR_BUILD" = x; then - if test x"$HOST_CC" != x; then - CC_FOR_BUILD="$HOST_CC" - else - if test x"$CC" != x; then - CC_FOR_BUILD="$CC" - else - CC_FOR_BUILD=cc - fi - fi +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 fi +dummy=dummy-$$ +trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int dummy(){}" > $dummy.c + for c in cc gcc c89 ; do + ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 + if test $? = 0 ; then + CC_FOR_BUILD="$c"; break + fi + done + rm -f $dummy.c $dummy.o $dummy.rel + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac + # This is needed to find uname on a Pyramid OSx when run in the BSD universe. # (ghazi@noc.rutgers.edu 8/24/94.) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then @@ -59,15 +120,57 @@ fi UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown -dummy=dummy-$$ -trap 'rm -f $dummy.c $dummy.o $dummy; exit 1' 1 2 15 - # Note: order is significant - the case branches are not exclusive. case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # Netbsd (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # Determine the machine/vendor (is the vendor relevant). + case "${UNAME_MACHINE}" in + amiga) machine=m68k-unknown ;; + arm32) machine=arm-unknown ;; + atari*) machine=m68k-atari ;; + sun3*) machine=m68k-sun ;; + mac68k) machine=m68k-apple ;; + macppc) machine=powerpc-apple ;; + hp3[0-9][05]) machine=m68k-hp ;; + ibmrt|romp-ibm) machine=romp-ibm ;; + *) machine=${UNAME_MACHINE}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE}" in + i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k) + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit 0 ;; alpha:OSF1:*:*) if test $UNAME_RELEASE = "V4.0"; then UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` @@ -77,41 +180,51 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in # A Xn.n version is an unreleased experimental baselevel. # 1.2 uses "1.2" for uname -r. cat <$dummy.s + .data +\$Lformat: + .byte 37,100,45,37,120,10,0 # "%d-%x\n" + + .text .globl main + .align 4 .ent main main: - .frame \$30,0,\$26,0 - .prologue 0 - .long 0x47e03d80 # implver $0 - lda \$2,259 - .long 0x47e20c21 # amask $2,$1 - srl \$1,8,\$2 - sll \$2,2,\$2 - sll \$0,3,\$0 - addl \$1,\$0,\$0 - addl \$2,\$0,\$0 - ret \$31,(\$26),1 + .frame \$30,16,\$26,0 + ldgp \$29,0(\$27) + .prologue 1 + .long 0x47e03d80 # implver \$0 + lda \$2,-1 + .long 0x47e20c21 # amask \$2,\$1 + lda \$16,\$Lformat + mov \$0,\$17 + not \$1,\$18 + jsr \$26,printf + ldgp \$29,0(\$26) + mov 0,\$16 + jsr \$26,exit .end main EOF $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null if test "$?" = 0 ; then - ./$dummy - case "$?" in - 7) + case `./$dummy` in + 0-0) UNAME_MACHINE="alpha" ;; - 15) + 1-0) UNAME_MACHINE="alphaev5" ;; - 14) + 1-1) UNAME_MACHINE="alphaev56" ;; - 10) + 1-101) UNAME_MACHINE="alphapca56" ;; - 16) + 2-303) UNAME_MACHINE="alphaev6" ;; + 2-307) + UNAME_MACHINE="alphaev67" + ;; esac fi rm -f $dummy.s $dummy @@ -127,11 +240,8 @@ EOF echo alpha-dec-winnt3.5 exit 0 ;; Amiga*:UNIX_System_V:4.0:*) - echo m68k-cbm-sysv4 + echo m68k-unknown-sysv4 exit 0;; - amiga:NetBSD:*:*) - echo m68k-cbm-netbsd${UNAME_RELEASE} - exit 0 ;; amiga:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; @@ -162,10 +272,7 @@ EOF arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) echo arm-acorn-riscix${UNAME_RELEASE} exit 0;; - arm32:NetBSD:*:*) - echo arm-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - exit 0 ;; - SR2?01:HI-UX/MPP:*:*) + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) echo hppa1.1-hitachi-hiuxmpp exit 0;; Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) @@ -221,15 +328,12 @@ EOF aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit 0 ;; - atari*:NetBSD:*:*) - echo m68k-atari-netbsd${UNAME_RELEASE} - exit 0 ;; atari*:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor + # "atarist" or "atariste" at least should have a processor # > m68000). The system name ranges from "MiNT" over "FreeMiNT" # to the lowercase version "mint" (or "freemint"). Finally # the system name "TOS" denotes a system which is actually not @@ -253,15 +357,9 @@ EOF *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit 0 ;; - sun3*:NetBSD:*:*) - echo m68k-sun-netbsd${UNAME_RELEASE} - exit 0 ;; sun3*:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; - mac68k:NetBSD:*:*) - echo m68k-apple-netbsd${UNAME_RELEASE} - exit 0 ;; mac68k:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; @@ -274,9 +372,6 @@ EOF powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit 0 ;; - macppc:NetBSD:*:*) - echo powerpc-apple-netbsd${UNAME_RELEASE} - exit 0 ;; RISC*:Mach:*:*) echo mips-dec-mach_bsd4.3 exit 0 ;; @@ -292,6 +387,7 @@ EOF mips:*:*:UMIPS | mips:*:*:RISCos) sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus +#include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { @@ -312,10 +408,13 @@ EOF EOF $CC_FOR_BUILD $dummy.c -o $dummy \ && ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ - && rm $dummy.c $dummy && exit 0 + && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy echo mips-mips-riscos${UNAME_RELEASE} exit 0 ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit 0 ;; Night_Hawk:Power_UNIX:*:*) echo powerpc-harris-powerunix exit 0 ;; @@ -331,7 +430,7 @@ EOF AViiON:dgux:*:*) # DG/UX returns AViiON for all architectures UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110] + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] then if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ [ ${TARGET_BINARY_INTERFACE}x = x ] @@ -363,9 +462,17 @@ EOF ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i?86:AIX:*:*) + i*86:AIX:*:*) echo i386-ibm-aix exit 0 ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit 0 ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then sed 's/^ //' << EOF >$dummy.c @@ -379,7 +486,7 @@ EOF exit(0); } EOF - $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0 + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy echo rs6000-ibm-aix3.2.5 elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then @@ -388,9 +495,9 @@ EOF echo rs6000-ibm-aix3.2 fi exit 0 ;; - *:AIX:*:4) + *:AIX:*:[45]) IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` - if /usr/sbin/lsattr -EHl ${IBM_CPU_ID} | grep POWER >/dev/null 2>&1; then + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else IBM_ARCH=powerpc @@ -398,7 +505,7 @@ EOF if [ -x /usr/bin/oslevel ] ; then IBM_REV=`/usr/bin/oslevel` else - IBM_REV=4.${UNAME_RELEASE} + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} fi echo ${IBM_ARCH}-ibm-aix${IBM_REV} exit 0 ;; @@ -408,7 +515,7 @@ EOF ibmrt:4.4BSD:*|romp-ibm:BSD:*) echo romp-ibm-bsd4.4 exit 0 ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC NetBSD and + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to exit 0 ;; # report: romp-ibm BSD 4.3 *:BOSX:*:*) @@ -424,11 +531,31 @@ EOF echo m68k-hp-bsd4.4 exit 0 ;; 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` case "${UNAME_MACHINE}" in 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) + case "${HPUX_REV}" in + 11.[0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + esac ;; + esac + fi ;; + esac + if [ "${HP_ARCH}" = "" ]; then sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE #include #include @@ -460,11 +587,16 @@ EOF } EOF (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` + if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi rm -f $dummy.c $dummy + fi ;; esac - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit 0 ;; 3050*:HI-UX:*:*) sed 's/^ //' << EOF >$dummy.c #include @@ -491,7 +623,7 @@ EOF exit (0); } EOF - $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0 + $CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy echo unknown-hitachi-hiuxwe2 exit 0 ;; @@ -510,7 +642,7 @@ EOF hp8??:OSF1:*:*) echo hppa1.0-hp-osf exit 0 ;; - i?86:OSF1:*:*) + i*86:OSF1:*:*) if [ -x /usr/sbin/sysversion ] ; then echo ${UNAME_MACHINE}-unknown-osf1mk else @@ -553,29 +685,30 @@ EOF -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ exit 0 ;; CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3D:*:*:*) + echo alpha-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*T3E:*:*:*) - echo alpha-cray-unicosmk${UNAME_RELEASE} + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY-2:*:*:*) echo cray2-cray-unicos exit 0 ;; - F300:UNIX_System_V:*:*) + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "f300-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit 0 ;; - F301:UNIX_System_V:*:*) - echo f301-fujitsu-uxpv`echo $UNAME_RELEASE | sed 's/ .*//'` - exit 0 ;; - hp3[0-9][05]:NetBSD:*:*) - echo m68k-hp-netbsd${UNAME_RELEASE} - exit 0 ;; hp300:OpenBSD:*:*) echo m68k-unknown-openbsd${UNAME_RELEASE} exit 0 ;; - i?86:BSD/386:*:* | i?86:BSD/OS:*:*) + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit 0 ;; sparc*:BSD/OS:*:*) @@ -585,17 +718,8 @@ EOF echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} exit 0 ;; *:FreeBSD:*:*) - if test -x /usr/bin/objformat; then - if test "elf" = "`/usr/bin/objformat`"; then - echo ${UNAME_MACHINE}-unknown-freebsdelf`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'` - exit 0 - fi - fi echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit 0 ;; - *:NetBSD:*:*) - echo ${UNAME_MACHINE}-unknown-netbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*//'` - exit 0 ;; *:OpenBSD:*:*) echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` exit 0 ;; @@ -605,6 +729,9 @@ EOF i*:MINGW*:*) echo ${UNAME_MACHINE}-pc-mingw32 exit 0 ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit 0 ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we @@ -623,54 +750,41 @@ EOF *:GNU:*:*) echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` exit 0 ;; - *:Linux:*:*) - - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - ld_help_string=`cd /; ld --help 2>&1` - ld_supported_emulations=`echo $ld_help_string \ - | sed -ne '/supported emulations:/!d - s/[ ][ ]*/ /g - s/.*supported emulations: *// - s/ .*// - p'` - case "$ld_supported_emulations" in - *ia64) - echo "${UNAME_MACHINE}-unknown-linux" - exit 0 - ;; - i?86linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit 0 - ;; - i?86coff) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit 0 - ;; - sparclinux) - echo "${UNAME_MACHINE}-unknown-linux-gnuaout" - exit 0 - ;; - armlinux) - echo "${UNAME_MACHINE}-unknown-linux-gnuaout" - exit 0 - ;; - elf32arm*) - echo "${UNAME_MACHINE}-unknown-linux-gnu" - exit 0 - ;; - armelf_linux*) - echo "${UNAME_MACHINE}-unknown-linux-gnu" - exit 0 - ;; - m68klinux) - echo "${UNAME_MACHINE}-unknown-linux-gnuaout" - exit 0 - ;; - elf32ppc) - # Determine Lib Version - cat >$dummy.c <$dummy.c < /* for printf() prototype */ +int main (int argc, char *argv[]) { +#else +int main (argc, argv) int argc; char *argv[]; { +#endif +#ifdef __MIPSEB__ + printf ("%s-unknown-linux-gnu\n", argv[1]); +#endif +#ifdef __MIPSEL__ + printf ("%sel-unknown-linux-gnu\n", argv[1]); +#endif + return 0; +} +EOF + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + ;; + ppc:Linux:*:*) + # Determine Lib Version + cat >$dummy.c < #if defined(__GLIBC__) extern char __libc_version[]; @@ -683,112 +797,130 @@ main(argc, argv) #if defined(__GLIBC__) printf("%s %s\n", __libc_version, __libc_release); #else - printf("unkown\n"); + printf("unknown\n"); #endif return 0; } EOF - LIBC="" - $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null - if test "$?" = 0 ; then - ./$dummy | grep 1\.99 > /dev/null - if test "$?" = 0 ; then - LIBC="libc1" - fi - fi - rm -f $dummy.c $dummy - echo powerpc-unknown-linux-gnu${LIBC} - exit 0 - ;; - esac - - if test "${UNAME_MACHINE}" = "alpha" ; then - sed 's/^ //' <$dummy.s + LIBC="" + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null + if test "$?" = 0 ; then + ./$dummy | grep 1\.99 > /dev/null + if test "$?" = 0 ; then LIBC="libc1" ; fi + fi + rm -f $dummy.c $dummy + echo powerpc-unknown-linux-gnu${LIBC} + exit 0 ;; + alpha:Linux:*:*) + cat <$dummy.s + .data + \$Lformat: + .byte 37,100,45,37,120,10,0 # "%d-%x\n" + .text .globl main + .align 4 .ent main - main: - .frame \$30,0,\$26,0 - .prologue 0 - .long 0x47e03d80 # implver $0 - lda \$2,259 - .long 0x47e20c21 # amask $2,$1 - srl \$1,8,\$2 - sll \$2,2,\$2 - sll \$0,3,\$0 - addl \$1,\$0,\$0 - addl \$2,\$0,\$0 - ret \$31,(\$26),1 + main: + .frame \$30,16,\$26,0 + ldgp \$29,0(\$27) + .prologue 1 + .long 0x47e03d80 # implver \$0 + lda \$2,-1 + .long 0x47e20c21 # amask \$2,\$1 + lda \$16,\$Lformat + mov \$0,\$17 + not \$1,\$18 + jsr \$26,printf + ldgp \$29,0(\$26) + mov 0,\$16 + jsr \$26,exit .end main EOF - LIBC="" - $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null + LIBC="" + $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null + if test "$?" = 0 ; then + case `./$dummy` in + 0-0) UNAME_MACHINE="alpha" ;; + 1-0) UNAME_MACHINE="alphaev5" ;; + 1-1) UNAME_MACHINE="alphaev56" ;; + 1-101) UNAME_MACHINE="alphapca56" ;; + 2-303) UNAME_MACHINE="alphaev6" ;; + 2-307) UNAME_MACHINE="alphaev67" ;; + esac + objdump --private-headers $dummy | \ + grep ld.so.1 > /dev/null if test "$?" = 0 ; then - ./$dummy - case "$?" in - 7) - UNAME_MACHINE="alpha" - ;; - 15) - UNAME_MACHINE="alphaev5" - ;; - 14) - UNAME_MACHINE="alphaev56" - ;; - 10) - UNAME_MACHINE="alphapca56" - ;; - 16) - UNAME_MACHINE="alphaev6" - ;; - esac - - objdump --private-headers $dummy | \ - grep ld.so.1 > /dev/null - if test "$?" = 0 ; then - LIBC="libc1" - fi + LIBC="libc1" fi - rm -f $dummy.s $dummy - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} ; exit 0 - elif test "${UNAME_MACHINE}" = "mips" ; then - cat >$dummy.c </dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - else - # Either a pre-BFD a.out linker (linux-gnuoldld) - # or one that does not give us useful --help. - # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout. - # If ld does not provide *any* "supported emulations:" - # that means it is gnuoldld. - echo "$ld_help_string" | grep >/dev/null 2>&1 "supported emulations:" - test $? != 0 && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0 - - case "${UNAME_MACHINE}" in - i?86) - VENDOR=pc; - ;; - *) - VENDOR=unknown; - ;; - esac - # Determine whether the default compiler is a.out or elf - cat >$dummy.c </dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit 0 ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit 0 ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit 0 ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit 0 ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + ld_supported_emulations=`cd /; ld --help 2>&1 \ + | sed -ne '/supported emulations:/!d + s/[ ][ ]*/ /g + s/.*supported emulations: *// + s/ .*// + p'` + case "$ld_supported_emulations" in + i*86linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 + ;; + elf_i*86) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + i*86coff) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 + ;; + esac + # Either a pre-BFD a.out linker (linux-gnuoldld) + # or one that does not give us useful --help. + # GCC wants to distinguish between linux-gnuoldld and linux-gnuaout. + # If ld does not provide *any* "supported emulations:" + # that means it is gnuoldld. + test -z "$ld_supported_emulations" && echo "${UNAME_MACHINE}-pc-linux-gnuoldld" && exit 0 + case "${UNAME_MACHINE}" in + i*86) + VENDOR=pc; + ;; + *) + VENDOR=unknown; + ;; + esac + # Determine whether the default compiler is a.out or elf + cat >$dummy.c < #ifdef __cplusplus +#include /* for printf() prototype */ int main (int argc, char *argv[]) { #else int main (argc, argv) int argc; char *argv[]; { @@ -809,15 +941,16 @@ EOF return 0; } EOF - $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy - fi ;; + $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0 + rm -f $dummy.c $dummy + test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + ;; # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions # are messed up and put the nodename in both sysname and nodename. - i?86:DYNIX/ptx:4*:*) + i*86:DYNIX/ptx:4*:*) echo i386-sequent-sysv4 exit 0 ;; - i?86:UNIX_SV:4.2MP:2.*) + i*86:UNIX_SV:4.2MP:2.*) # Unixware is an offshoot of SVR4, but it has its own version # number series starting with 2... # I am not positive that other SVR4 systems won't match this, @@ -825,7 +958,7 @@ EOF # Use sysv4.2uw... so that sysv4* matches it. echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} exit 0 ;; - i?86:*:4.*:* | i?86:SYSTEM_V:4.*:*) + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} @@ -833,7 +966,7 @@ EOF echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit 0 ;; - i?86:*:5:7*) + i*86:*:5:7*) # Fixed at (any) Pentium or better UNAME_MACHINE=i586 if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then @@ -842,7 +975,7 @@ EOF echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} fi exit 0 ;; - i?86:*:3.2:*) + i*86:*:3.2:*) if test -f /usr/options/cb.name; then UNAME_REL=`sed -n 's/.*Version //p' /dev/null | grep 86 >/dev/null \ && echo i486-ncr-sysv4 && exit 0 ;; - m68*:LynxOS:2.*:*) + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) echo m68k-unknown-lynxos${UNAME_RELEASE} exit 0 ;; mc68030:UNIX_System_V:4.*:*) echo m68k-atari-sysv4 exit 0 ;; - i?86:LynxOS:2.*:* | i?86:LynxOS:3.[01]*:*) + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) echo i386-unknown-lynxos${UNAME_RELEASE} exit 0 ;; TSUNAMI:LynxOS:2.*:*) echo sparc-unknown-lynxos${UNAME_RELEASE} exit 0 ;; - rs6000:LynxOS:2.*:* | PowerPC:LynxOS:2.*:*) + rs6000:LynxOS:2.*:*) echo rs6000-unknown-lynxos${UNAME_RELEASE} exit 0 ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; SM[BE]S:UNIX_SV:*:*) echo mips-dde-sysv${UNAME_RELEASE} exit 0 ;; @@ -943,7 +1083,7 @@ EOF mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit 0 ;; - news*:NEWS-OS:*:6*) + news*:NEWS-OS:6*:*) echo mips-sony-newsos6 exit 0 ;; R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) @@ -974,8 +1114,63 @@ EOF *:Rhapsody:*:*) echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} exit 0 ;; + *:Darwin:*:*) + echo `uname -p`-apple-darwin${UNAME_RELEASE} + exit 0 ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + if test "${UNAME_MACHINE}" = "x86pc"; then + UNAME_MACHINE=pc + fi + echo `uname -p`-${UNAME_MACHINE}-nto-qnx + exit 0 ;; *:QNX:*:4*) - echo i386-qnx-qnx${UNAME_VERSION} + echo i386-pc-qnx + exit 0 ;; + NSR-[KW]:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit 0 ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit 0 ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit 0 ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit 0 ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit 0 ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit 0 ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit 0 ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit 0 ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit 0 ;; + *:ITS:*:*) + echo pdp10-unknown-its exit 0 ;; esac @@ -1068,11 +1263,24 @@ main () #endif #if defined (vax) -#if !defined (ultrix) - printf ("vax-dec-bsd\n"); exit (0); -#else - printf ("vax-dec-ultrix\n"); exit (0); -#endif +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif #endif #if defined (alliant) && defined (i860) @@ -1083,7 +1291,7 @@ main () } EOF -$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0 +$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm -f $dummy.c $dummy && exit 0 rm -f $dummy.c $dummy # Apollos put the system type in the environment. @@ -1116,6 +1324,48 @@ then esac fi -#echo '(Unable to guess system type)' 1>&2 +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/srclib/pcre/config.sub b/srclib/pcre/config.sub index 28426bb8fa..93a3a14643 100644 --- a/srclib/pcre/config.sub +++ b/srclib/pcre/config.sub @@ -1,6 +1,10 @@ #! /bin/sh -# Configuration validation subroutine script, version 1.1. -# Copyright (C) 1991, 92-97, 1998, 1999 Free Software Foundation, Inc. +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. + +timestamp='2001-05-11' + # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software # can handle that machine. It does not imply ALL GNU software can. @@ -25,6 +29,8 @@ # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. +# Please send patches to . +# # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. # If it is invalid, we print an error message on stderr and exit with code 1. @@ -45,30 +51,73 @@ # CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM # It is wrong to echo any other type of specification. -if [ x$1 = x ] -then - echo Configuration name missing. 1>&2 - echo "Usage: $0 CPU-MFR-OPSYS" 1>&2 - echo "or $0 ALIAS" 1>&2 - echo where ALIAS is a recognized configuration type. 1>&2 - exit 1 -fi +me=`echo "$0" | sed -e 's,.*/,,'` -# First pass through any local machine types. -case $1 in - *local*) - echo $1 - exit 0 - ;; - *) - ;; +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit 0;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; esac # Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in - linux-gnu*) + nto-qnx* | linux-gnu* | storm-chaos* | os2-emx*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; @@ -94,7 +143,7 @@ case $os in -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple) + -apple | -axis) os= basic_machine=$1 ;; @@ -166,27 +215,40 @@ esac case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. - tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \ - | arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \ + tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \ + | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \ + | pyramid | mn10200 | mn10300 | tron | a29k \ | 580 | i960 | h8300 \ + | x86 | ppcbe | mipsbe | mipsle | shbe | shle \ | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \ - | alpha | alphaev[4-7] | alphaev56 | alphapca5[67] \ - | we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \ - | 1750a | dsp16xx | pdp11 | mips16 | mips64 | mipsel | mips64el \ + | hppa64 \ + | alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \ + | alphaev6[78] \ + | we32k | ns16k | clipper | i370 | sh | sh[34] \ + | powerpc | powerpcle \ + | 1750a | dsp16xx | pdp10 | pdp11 \ + | mips16 | mips64 | mipsel | mips64el \ | mips64orion | mips64orionel | mipstx39 | mipstx39el \ | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \ - | mips64vr5000 | miprs64vr5000el | mcore \ - | sparc | sparclet | sparclite | sparc64 | sparcv9 | v850 | c4x \ - | thumb | d10v | fr30) + | mips64vr5000 | miprs64vr5000el | mcore | s390 | s390x \ + | sparc | sparclet | sparclite | sparc64 | sparcv9 | sparcv9b \ + | v850 | c4x \ + | thumb | d10v | d30v | fr30 | avr | openrisc | tic80 \ + | pj | pjl | h8500 | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. basic_machine=$basic_machine-unknown + os=-none ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | h8500 | w65 | pj | pjl) + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | z8k | v70 | w65 | z8k) ;; # We use `pc' rather than `unknown' # because (1) that's what they normally are, and # (2) the word "unknown" tends to confuse beginning users. - i[34567]86) + i*86 | x86_64) basic_machine=$basic_machine-pc ;; # Object if more than one company name word. @@ -196,23 +258,30 @@ case $basic_machine in ;; # Recognize the basic CPU types with company name. # FIXME: clean up the formatting here. - vax-* | tahoe-* | i[34567]86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \ - | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \ + vax-* | tahoe-* | i*86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \ + | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \ + | arm-* | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \ | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \ | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \ | xmp-* | ymp-* \ - | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* | hppa2.0n-* \ - | alpha-* | alphaev[4-7]-* | alphaev56-* | alphapca5[67]-* \ + | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \ + | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \ + | hppa2.0n-* | hppa64-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \ + | alphaev6[78]-* \ | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \ | clipper-* | orion-* \ - | sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \ - | sparc64-* | sparcv9-* | sparc86x-* | mips16-* | mips64-* | mipsel-* \ + | sparclite-* | pdp10-* | pdp11-* | sh-* | sh[34]-* | sh[34]eb-* \ + | powerpc-* | powerpcle-* | sparc64-* | sparcv9-* | sparcv9b-* | sparc86x-* \ + | mips16-* | mips64-* | mipsel-* \ | mips64el-* | mips64orion-* | mips64orionel-* \ | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \ | mipstx39-* | mipstx39el-* | mcore-* \ - | f301-* | armv*-* | t3e-* \ + | f30[01]-* | f700-* | s390-* | s390x-* | sv1-* | t3e-* \ + | [cjt]90-* \ | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \ - | thumb-* | v850-* | d30v-* | tic30-* | c30-* | fr30-* ) + | thumb-* | v850-* | d30v-* | tic30-* | tic80-* | c30-* | fr30-* \ + | bs2000-* | tic54x-* | c54x-* | x86_64-* | pj-* | pjl-*) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. @@ -249,14 +318,14 @@ case $basic_machine in os=-sysv ;; amiga | amiga-*) - basic_machine=m68k-cbm + basic_machine=m68k-unknown ;; amigaos | amigados) - basic_machine=m68k-cbm + basic_machine=m68k-unknown os=-amigaos ;; amigaunix | amix) - basic_machine=m68k-cbm + basic_machine=m68k-unknown os=-sysv4 ;; apollo68) @@ -303,13 +372,16 @@ case $basic_machine in basic_machine=cray2-cray os=-unicos ;; - [ctj]90-cray) - basic_machine=c90-cray + [cjt]90) + basic_machine=${basic_machine}-cray os=-unicos ;; crds | unos) basic_machine=m68k-crds ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; da30 | da30-*) basic_machine=m68k-da30 ;; @@ -357,6 +429,10 @@ case $basic_machine in basic_machine=tron-gmicro os=-sysv ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; h3050r* | hiux*) basic_machine=hppa1.1-hitachi os=-hiuxwe2 @@ -432,19 +508,19 @@ case $basic_machine in basic_machine=i370-ibm ;; # I'm not sure what "Sysv32" means. Should this be sysv3.2? - i[34567]86v32) + i*86v32) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv32 ;; - i[34567]86v4*) + i*86v4*) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv4 ;; - i[34567]86v) + i*86v) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-sysv ;; - i[34567]86sol2) + i*86sol2) basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` os=-solaris2 ;; @@ -456,17 +532,6 @@ case $basic_machine in basic_machine=i386-unknown os=-vsta ;; - i386-go32 | go32) - basic_machine=i386-unknown - os=-go32 - ;; - i386-mingw32 | mingw32) - basic_machine=i386-unknown - os=-mingw32 - ;; - i386-qnx | qnx) - basic_machine=i386-qnx - ;; iris | iris4d) basic_machine=mips-sgi case $os in @@ -492,6 +557,10 @@ case $basic_machine in basic_machine=ns32k-utek os=-sysv ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; miniframe) basic_machine=m68000-convergent ;; @@ -513,12 +582,16 @@ case $basic_machine in mips3*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown ;; + mmix*) + basic_machine=mmix-knuth + os=-mmixware + ;; monitor) basic_machine=m68k-rom68k os=-coff ;; msdos) - basic_machine=i386-unknown + basic_machine=i386-pc os=-msdos ;; mvs) @@ -582,9 +655,16 @@ case $basic_machine in basic_machine=i960-intel os=-mon960 ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; np1) basic_machine=np1-gould ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; op50n-* | op60c-*) basic_machine=hppa1.1-oki os=-proelf @@ -614,28 +694,28 @@ case $basic_machine in pc532 | pc532-*) basic_machine=ns32k-pc532 ;; - pentium | p5 | k5 | k6 | nexen) + pentium | p5 | k5 | k6 | nexgen) basic_machine=i586-pc ;; - pentiumpro | p6 | 6x86) + pentiumpro | p6 | 6x86 | athlon) basic_machine=i686-pc ;; pentiumii | pentium2) - basic_machine=i786-pc + basic_machine=i686-pc ;; - pentium-* | p5-* | k5-* | k6-* | nexen-*) + pentium-* | p5-* | k5-* | k6-* | nexgen-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; - pentiumpro-* | p6-* | 6x86-*) + pentiumpro-* | p6-* | 6x86-* | athlon-*) basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumii-* | pentium2-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pn) basic_machine=pn-gould ;; - power) basic_machine=rs6000-ibm + power) basic_machine=power-ibm ;; ppc) basic_machine=powerpc-unknown ;; @@ -650,6 +730,10 @@ case $basic_machine in ps2) basic_machine=i386-ibm ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; rom68k) basic_machine=m68k-rom68k os=-coff @@ -729,6 +813,10 @@ case $basic_machine in sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; symmetry) basic_machine=i386-sequent os=-dynix @@ -737,6 +825,10 @@ case $basic_machine in basic_machine=t3e-cray os=-unicos ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; tx39) basic_machine=mipstx39-unknown ;; @@ -832,13 +924,20 @@ case $basic_machine in vax) basic_machine=vax-dec ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; pdp11) basic_machine=pdp11-dec ;; we32k) basic_machine=we32k-att ;; - sparc | sparcv9) + sh3 | sh4) + basic_machine=sh-unknown + ;; + sparc | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; cydra) @@ -860,6 +959,9 @@ case $basic_machine in basic_machine=c4x-none os=-coff ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; *) echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 exit 1 @@ -918,12 +1020,26 @@ case $os in | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -rhapsody* | -opened* | -openstep* | -oskit*) + | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -os2*) # Remember, each alternative MUST END IN *, to match a version number. ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto*) + os=-nto-qnx + ;; -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ - | -macos* | -mpw* | -magic* | -mon960* | -lnews*) + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) ;; -mac*) os=`echo $os | sed -e 's|mac|macos|'` @@ -940,6 +1056,9 @@ case $os in -opened*) os=-openedition ;; + -wince*) + os=-wince + ;; -osfrose*) os=-osfrose ;; @@ -964,6 +1083,9 @@ case $os in -ns2 ) os=-nextstep2 ;; + -nsk*) + os=-nsk + ;; # Preserve the version number of sinix5. -sinix5.*) os=`echo $os | sed -e 's|sinix|sysv|'` @@ -977,9 +1099,6 @@ case $os in -oss*) os=-sysv3 ;; - -qnx) - os=-qnx4 - ;; -svr4) os=-sysv4 ;; @@ -1001,7 +1120,7 @@ case $os in -xenix) os=-xenix ;; - -*mint | -*MiNT) + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) os=-mint ;; -none) @@ -1035,6 +1154,9 @@ case $basic_machine in arm*-semi) os=-aout ;; + pdp10-*) + os=-tops20 + ;; pdp11-*) os=-none ;; @@ -1143,7 +1265,7 @@ case $basic_machine in *-masscomp) os=-rtu ;; - f301-fujitsu) + f30[01]-fujitsu | f700-fujitsu) os=-uxpv ;; *-rom68k) @@ -1221,7 +1343,7 @@ case $basic_machine in -mpw* | -macos*) vendor=apple ;; - -*mint | -*MiNT) + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; esac @@ -1230,3 +1352,11 @@ case $basic_machine in esac echo $basic_machine$os +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/srclib/pcre/dftables.c b/srclib/pcre/dftables.c index d572dfd3e6..fe4ffcdb7a 100644 --- a/srclib/pcre/dftables.c +++ b/srclib/pcre/dftables.c @@ -8,7 +8,7 @@ and semantics are as close as possible to those of the Perl 5 language. Written by: Philip Hazel - Copyright (c) 1997-2000 University of Cambridge + Copyright (c) 1997-2001 University of Cambridge ----------------------------------------------------------------------------- Permission is granted to anyone to use this software for any purpose on any @@ -53,7 +53,7 @@ order to be consistent. */ int main(void) { int i; -unsigned const char *tables = pcre_maketables(); +const unsigned char *tables = pcre_maketables(); printf( "/*************************************************\n" diff --git a/srclib/pcre/doc/Tech.Notes b/srclib/pcre/doc/Tech.Notes index 03904db3cc..f5ca280115 100644 --- a/srclib/pcre/doc/Tech.Notes +++ b/srclib/pcre/doc/Tech.Notes @@ -135,7 +135,7 @@ end of each byte. Back references --------------- -OP_REF is followed by a single byte containing the reference number. +OP_REF is followed by two bytes containing the reference number. Repeating character classes and back references @@ -163,11 +163,21 @@ Brackets and alternation A pair of non-capturing (round) brackets is wrapped round each expression at compile time, so alternation always happens in the context of brackets. + Non-capturing brackets use the opcode OP_BRA, while capturing brackets use OP_BRA+1, OP_BRA+2, etc. [Note for North Americans: "bracket" to some English speakers, including myself, can be round, square, curly, or pointy. Hence this usage.] +Originally PCRE was limited to 99 capturing brackets (so as not to use up all +the opcodes). From release 3.5, there is no limit. What happens is that the +first ones, up to EXTRACT_BASIC_MAX are handled with separate opcodes, as +above. If there are more, the opcode is set to EXTRACT_BASIC_MAX+1, and the +first operation in the bracket is OP_BRANUMBER, followed by a 2-byte bracket +number. This opcode is ignored while matching, but is fished out when handling +the bracket itself. (They could have all been done like this, but I was making +minimal changes.) + A bracket opcode is followed by two bytes which give the offset to the next alternative OP_ALT or, if there aren't any branches, to the matching KET opcode. Each OP_ALT is followed by two bytes giving the offset to the next one, @@ -191,8 +201,8 @@ appropriate. A subpattern with a bounded maximum repetition is replicated in a nested fashion up to the maximum number of times, with BRAZERO or BRAMINZERO before each replication after the minimum, so that, for example, (abc){2,5} is -compiled as (abc)(abc)((abc)((abc)(abc)?)?)?. The 200-bracket limit does not -apply to these internally generated brackets. +compiled as (abc)(abc)((abc)((abc)(abc)?)?)?. The 99 and 200 bracket limits do +not apply to these internally generated brackets. Assertions @@ -202,9 +212,10 @@ Forward assertions are just like other subpatterns, but starting with one of the opcodes OP_ASSERT or OP_ASSERT_NOT. Backward assertions use the opcodes OP_ASSERTBACK and OP_ASSERTBACK_NOT, and the first opcode inside the assertion is OP_REVERSE, followed by a two byte count of the number of characters to move -back the pointer in the subject string. A separate count is present in each -alternative of a lookbehind assertion, allowing them to have different fixed -lengths. +back the pointer in the subject string. When operating in UTF-8 mode, the count +is a character count rather than a byte count. A separate count is present in +each alternative of a lookbehind assertion, allowing them to have different +fixed lengths. Once-only subpatterns @@ -219,7 +230,7 @@ Conditional subpatterns These are like other subpatterns, but they start with the opcode OP_COND. If the condition is a back reference, this is stored at the start of the -subpattern using the opcode OP_CREF followed by one byte containing the +subpattern using the opcode OP_CREF followed by two bytes containing the reference number. Otherwise, a conditional subpattern will always start with one of the assertions. @@ -239,4 +250,4 @@ the compiled data. Philip Hazel -February 2000 +August 2001 diff --git a/srclib/pcre/doc/pcreposix.3 b/srclib/pcre/doc/pcreposix.3 index 1be5d9ac6f..41716ead91 100644 --- a/srclib/pcre/doc/pcreposix.3 +++ b/srclib/pcre/doc/pcreposix.3 @@ -77,6 +77,14 @@ to the native function. The PCRE_MULTILINE option is set when the expression is passed for compilation to the native function. +In the absence of these flags, no options are passed to the native function. +This means the the regex is compiled with PCRE default semantics. In +particular, the way it handles newline characters in the subject string is the +Perl way, not the POSIX way. Note that setting PCRE_MULTILINE has only +\fIsome\fR of the effects specified for REG_NEWLINE. It does not affect the way +newlines are matched by . (they aren't) or a negative class such as [^a] (they +are). + The yield of \fBregcomp()\fR is zero on success, and non-zero otherwise. The \fIpreg\fR structure is filled in on success, and one member of the structure is publicized: \fIre_nsub\fR contains the number of capturing subpatterns in @@ -138,4 +146,4 @@ Cambridge CB2 3QG, England. .br Phone: +44 1223 334714 -Copyright (c) 1997-1999 University of Cambridge. +Copyright (c) 1997-2000 University of Cambridge. diff --git a/srclib/pcre/doc/pcreposix.html b/srclib/pcre/doc/pcreposix.html index 121d90f867..9c89478420 100644 --- a/srclib/pcre/doc/pcreposix.html +++ b/srclib/pcre/doc/pcreposix.html @@ -107,6 +107,15 @@ The PCRE_MULTILINE option is set when the expression is passed for compilation to the native function.

+In the absence of these flags, no options are passed to the native function. +This means the the regex is compiled with PCRE default semantics. In +particular, the way it handles newline characters in the subject string is the +Perl way, not the POSIX way. Note that setting PCRE_MULTILINE has only +some of the effects specified for REG_NEWLINE. It does not affect the way +newlines are matched by . (they aren't) or a negative class such as [^a] (they +are). +

+

The yield of regcomp() is zero on success, and non-zero otherwise. The preg structure is filled in on success, and one member of the structure is publicized: re_nsub contains the number of capturing subpatterns in @@ -179,4 +188,4 @@ Cambridge CB2 3QG, England. Phone: +44 1223 334714

-Copyright (c) 1997-1999 University of Cambridge. +Copyright (c) 1997-2000 University of Cambridge. diff --git a/srclib/pcre/doc/pcreposix.txt b/srclib/pcre/doc/pcreposix.txt index 4a7036f340..2d76f7cdcc 100644 --- a/srclib/pcre/doc/pcreposix.txt +++ b/srclib/pcre/doc/pcreposix.txt @@ -80,6 +80,15 @@ COMPILING A PATTERN The PCRE_MULTILINE option is set when the expression is passed for compilation to the native function. + In the absence of these flags, no options are passed to the + native function. This means the the regex is compiled with + PCRE default semantics. In particular, the way it handles + newline characters in the subject string is the Perl way, + not the POSIX way. Note that setting PCRE_MULTILINE has only + some of the effects specified for REG_NEWLINE. It does not + affect the way newlines are matched by . (they aren't) or a + negative class such as [^a] (they are). + The yield of regcomp() is zero on success, and non-zero oth- erwise. The preg structure is filled in on success, and one member of the structure is publicized: re_nsub contains the @@ -147,4 +156,4 @@ AUTHOR Cambridge CB2 3QG, England. Phone: +44 1223 334714 - Copyright (c) 1997-1999 University of Cambridge. + Copyright (c) 1997-2000 University of Cambridge. diff --git a/srclib/pcre/doc/perltest.txt b/srclib/pcre/doc/perltest.txt index 6c38ebe19f..5a404016b5 100644 --- a/srclib/pcre/doc/perltest.txt +++ b/srclib/pcre/doc/perltest.txt @@ -13,11 +13,17 @@ for perltest as well as for pcretest, and the special upper case modifiers such as /A that pcretest recognizes are not used in these files. The output should be identical, apart from the initial identifying banner. +For testing UTF-8 features, an alternative form of perltest, called perltest8, +is supplied. This requires Perl 5.6 or higher. It recognizes the special +modifier /8 that pcretest uses to invoke UTF-8 functionality. The testinput5 +file can be fed to perltest8. + The testinput2 and testinput4 files are not suitable for feeding to perltest, since they do make use of the special upper case modifiers and escapes that pcretest uses to test some features of PCRE. The first of these files also contains malformed regular expressions, in order to check that PCRE diagnoses -them correctly. +them correctly. Similarly, testinput6 tests UTF-8 features that do not relate +to Perl. Philip Hazel -January 2000 +August 2000 diff --git a/srclib/pcre/get.c b/srclib/pcre/get.c index 035668e301..55e736dc24 100644 --- a/srclib/pcre/get.c +++ b/srclib/pcre/get.c @@ -9,7 +9,7 @@ the file Tech.Notes for some information on the internals. Written by: Philip Hazel - Copyright (c) 1997-1999 University of Cambridge + Copyright (c) 1997-2001 University of Cambridge ----------------------------------------------------------------------------- Permission is granted to anyone to use this software for any purpose on any @@ -143,6 +143,25 @@ return 0; +/************************************************* +* Free store obtained by get_substring_list * +*************************************************/ + +/* This function exists for the benefit of people calling PCRE from non-C +programs that can call its functions, but not free() or (pcre_free)() directly. + +Argument: the result of a previous pcre_get_substring_list() +Returns: nothing +*/ + +void +pcre_free_substring_list(const char **pointer) +{ +(pcre_free)((void *)pointer); +} + + + /************************************************* * Copy captured string to new store * *************************************************/ @@ -186,4 +205,23 @@ substring[yield] = 0; return yield; } + + +/************************************************* +* Free store obtained by get_substring * +*************************************************/ + +/* This function exists for the benefit of people calling PCRE from non-C +programs that can call its functions, but not free() or (pcre_free)() directly. + +Argument: the result of a previous pcre_get_substring() +Returns: nothing +*/ + +void +pcre_free_substring(const char *pointer) +{ +(pcre_free)((void *)pointer); +} + /* End of get.c */ diff --git a/srclib/pcre/ltmain.sh b/srclib/pcre/ltmain.sh index 50515ad0b9..5959c479b0 100644 --- a/srclib/pcre/ltmain.sh +++ b/srclib/pcre/ltmain.sh @@ -1,7 +1,8 @@ # ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun ltconfig. +# NOTE: Changing this file will not affect anything until you rerun configure. # -# Copyright (C) 1996-1999 Free Software Foundation, Inc. +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify @@ -54,8 +55,8 @@ modename="$progname" # Constants. PROGRAM=ltmain.sh PACKAGE=libtool -VERSION=1.3.4 -TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)" +VERSION=1.4 +TIMESTAMP=" (1.920 2001/04/24 23:26:18)" default_mode= help="Try \`$progname --help' for more information." @@ -83,12 +84,6 @@ if test "${LANG+set}" = set; then save_LANG="$LANG"; LANG=C; export LANG fi -if test "$LTCONFIG_VERSION" != "$VERSION"; then - echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then echo "$modename: not configured to build any kind of library" 1>&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 @@ -113,16 +108,16 @@ do arg="$1" shift - case "$arg" in + case $arg in -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; *) optarg= ;; esac # If the previous option needs an argument, assign it. if test -n "$prev"; then - case "$prev" in + case $prev in execute_dlfiles) - eval "$prev=\"\$$prev \$arg\"" + execute_dlfiles="$execute_dlfiles $arg" ;; *) eval "$prev=\$arg" @@ -135,7 +130,7 @@ do fi # Have we seen a non-optional argument yet? - case "$arg" in + case $arg in --help) show_help=yes ;; @@ -146,7 +141,7 @@ do ;; --config) - sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0 + sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 exit 0 ;; @@ -211,12 +206,12 @@ if test -z "$show_help"; then # Infer the operation mode. if test -z "$mode"; then - case "$nonopt" in + case $nonopt in *cc | *++ | gcc* | *-gcc*) mode=link for arg do - case "$arg" in + case $arg in -c) mode=compile break @@ -261,12 +256,13 @@ if test -z "$show_help"; then help="Try \`$modename --help --mode=$mode' for more information." # These modes are in order of execution frequency so that they run quickly. - case "$mode" in + case $mode in # libtool compile mode compile) modename="$modename: compile" # Get the compilation command and the source file. base_compile= + prev= lastarg= srcfile="$nonopt" suppress_output= @@ -274,8 +270,34 @@ if test -z "$show_help"; then user_target=no for arg do + case $prev in + "") ;; + xcompiler) + # Aesthetically quote the previous argument. + prev= + lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + + case $arg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + + # Add the previous argument to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + continue + ;; + esac + # Accept any command-line options. - case "$arg" in + case $arg in -o) if test "$user_target" != "no"; then $echo "$modename: you cannot specify \`-o' more than once" 1>&2 @@ -288,9 +310,53 @@ if test -z "$show_help"; then build_old_libs=yes continue ;; + + -prefer-pic) + pic_mode=yes + continue + ;; + + -prefer-non-pic) + pic_mode=no + continue + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` + lastarg= + IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' + for arg in $args; do + IFS="$save_ifs" + + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + lastarg="$lastarg $arg" + done + IFS="$save_ifs" + lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + + # Add the arguments to base_compile. + if test -z "$base_compile"; then + base_compile="$lastarg" + else + base_compile="$base_compile $lastarg" + fi + continue + ;; esac - case "$user_target" in + case $user_target in next) # The next one is the -o target name user_target=yes @@ -316,10 +382,10 @@ if test -z "$show_help"; then lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly in scan - # sets, so we specify it separately. - case "$lastarg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + # Many Bourne shells cannot handle close brackets correctly + # in scan sets, so we specify it separately. + case $lastarg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") lastarg="\"$lastarg\"" ;; esac @@ -332,7 +398,7 @@ if test -z "$show_help"; then fi done - case "$user_target" in + case $user_target in set) ;; no) @@ -348,7 +414,7 @@ if test -z "$show_help"; then # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo xform='[cCFSfmso]' - case "$libobj" in + case $libobj in *.ada) xform=ada ;; *.adb) xform=adb ;; *.ads) xform=ads ;; @@ -363,7 +429,7 @@ if test -z "$show_help"; then libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - case "$libobj" in + case $libobj in *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; *) $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 @@ -387,10 +453,21 @@ if test -z "$show_help"; then $run $rm $removelist trap "$run $rm $removelist; exit 1" 1 2 15 + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in + cygwin* | mingw* | pw32* | os2*) + pic_mode=default + ;; + esac + if test $pic_mode = no && test "$deplibs_check_method" != pass_all; then + # non-PIC code in shared libraries is not supported + pic_mode=default + fi + # Calculate the filename of the output object if compiler does # not support -o with -c if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext} + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} lockfile="$output_obj.lock" removelist="$removelist $output_obj $lockfile" trap "$run $rm $removelist; exit 1" 1 2 15 @@ -402,7 +479,7 @@ if test -z "$show_help"; then # Lock this critical section if it is needed # We use this script file to make the link, it avoids creating a new file if test "$need_locks" = yes; then - until ln "$0" "$lockfile" 2>/dev/null; do + until $run ln "$0" "$lockfile" 2>/dev/null; do $show "Waiting for $lockfile to be removed" sleep 2 done @@ -434,8 +511,13 @@ compiler." # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile - # All platforms use -DPIC, to notify preprocessed assembler code. - command="$base_compile $srcfile $pic_flag -DPIC" + if test "$pic_mode" != no; then + # All platforms use -DPIC, to notify preprocessed assembler code. + command="$base_compile $srcfile $pic_flag -DPIC" + else + # Don't build PIC code + command="$base_compile $srcfile" + fi if test "$build_old_libs" = yes; then lo_libobj="$libobj" dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` @@ -506,7 +588,8 @@ compiler." fi # If we have no pic_flag, then copy the object into place and finish. - if test -z "$pic_flag" && test "$build_old_libs" = yes; then + if (test -z "$pic_flag" || test "$pic_mode" != default) && + test "$build_old_libs" = yes; then # Rename the .lo from within objdir to obj if test -f $obj; then $show $rm $obj @@ -546,7 +629,13 @@ compiler." # Only build a position-dependent object if we build old libraries. if test "$build_old_libs" = yes; then - command="$base_compile $srcfile" + if test "$pic_mode" != yes; then + # Don't build PIC code + command="$base_compile $srcfile" + else + # All platforms use -DPIC, to notify preprocessed assembler code. + command="$base_compile $srcfile $pic_flag -DPIC" + fi if test "$compiler_c_o" = yes; then command="$command -o $obj" output_obj="$obj" @@ -612,17 +701,17 @@ compiler." # Unlock the critical section if it was locked if test "$need_locks" != no; then - $rm "$lockfile" + $run $rm "$lockfile" fi exit 0 ;; # libtool link mode - link) + link | relink) modename="$modename: link" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) # It is impossible to link a dll without this setting, and # we shouldn't force the makefile maintainer to figure out # which system we are compiling for in order to pass an extra @@ -635,179 +724,12 @@ compiler." # -no-undefined on the libtool link line when we can be certain # that all symbols are satisfied, otherwise we get a static library. allow_undefined=yes - - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include -# #undef WIN32_LEAN_AND_MEAN -# #include -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include /* for printf() */ -# #include /* for open(), lseek(), read() */ -# #include /* for O_RDONLY, O_BINARY */ -# #include /* for strdup() */ -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (!dll) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i\?\'\ \ ]*|*]*|"") + qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test + ;; + *) qarg=$arg ;; + esac + libtool_args="$libtool_args $qarg" # If the previous option needs an argument, assign it. if test -n "$prev"; then - case "$prev" in + case $prev in output) compile_command="$compile_command @OUTPUT@" finalize_command="$finalize_command @OUTPUT@" ;; esac - case "$prev" in + case $prev in dlfiles|dlprefiles) if test "$preload" = no; then # Add the symbol object into the linking commands. @@ -905,7 +828,7 @@ compiler." finalize_command="$finalize_command @SYMFILE@" preload=yes fi - case "$arg" in + case $arg in *.la | *.lo) ;; # We handle these cases below. force) if test "$dlself" = no; then @@ -934,6 +857,7 @@ compiler." dlprefiles="$dlprefiles $arg" fi prev= + continue ;; esac ;; @@ -958,7 +882,7 @@ compiler." ;; rpath | xrpath) # We need an absolute path. - case "$arg" in + case $arg in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 @@ -979,17 +903,32 @@ compiler." prev= continue ;; + xcompiler) + compiler_flags="$compiler_flags $qarg" + prev= + compile_command="$compile_command $qarg" + finalize_command="$finalize_command $qarg" + continue + ;; + xlinker) + linker_flags="$linker_flags $qarg" + compiler_flags="$compiler_flags $wl$qarg" + prev= + compile_command="$compile_command $wl$qarg" + finalize_command="$finalize_command $wl$qarg" + continue + ;; *) eval "$prev=\"\$arg\"" prev= continue ;; esac - fi + fi # test -n $prev prevarg="$arg" - case "$arg" in + case $arg in -all-static) if test -n "$link_static_flag"; then compile_command="$compile_command $link_static_flag" @@ -1026,7 +965,7 @@ compiler." -export-symbols | -export-symbols-regex) if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: not more than one -exported-symbols argument allowed" + $echo "$modename: more than one -exported-symbols argument is not allowed" exit 1 fi if test "X$arg" = "X-export-symbols"; then @@ -1037,58 +976,65 @@ compiler." continue ;; + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in + no/*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; + esac + continue + ;; + -L*) dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` # We need an absolute path. - case "$dir" in + case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) absdir=`cd "$dir" && pwd` if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - absdir="$dir" + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 + exit 1 fi dir="$absdir" ;; esac - case " $deplibs " in - *" $arg "*) ;; - *) deplibs="$deplibs $arg";; - esac - case " $lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir";; + case "$deplibs " in + *" -L$dir "*) ;; + *) + deplibs="$deplibs -L$dir" + lib_search_path="$lib_search_path $dir" + ;; esac - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - dllsearchdir=`cd "$dir" && pwd || echo "$dir"` - case ":$dllsearchpath:" in - ::) dllsearchpath="$dllsearchdir";; - *":$dllsearchdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dllsearchdir";; + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; esac ;; esac + continue ;; -l*) - if test "$arg" = "-lc"; then - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*) - # These systems don't actually have c library (as such) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in + *-*-cygwin* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) continue ;; - esac - elif test "$arg" = "-lm"; then - case "$host" in - *-*-cygwin* | *-*-beos*) - # These systems don't actually have math library (as such) - continue + *-*-mingw* | *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue ;; esac fi deplibs="$deplibs $arg" + continue ;; -module) @@ -1096,6 +1042,25 @@ compiler." continue ;; + -no-fast-install) + fast_install=no + continue + ;; + + -no-install) + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + # The PATH hackery in wrapper scripts is required on Windows + # in order for the loader to find any dlls it needs. + $echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2 + $echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2 + fast_install=no + ;; + *) no_install=yes ;; + esac + continue + ;; + -no-undefined) allow_undefined=no continue @@ -1121,7 +1086,7 @@ compiler." -R*) dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` # We need an absolute path. - case "$dir" in + case $dir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) $echo "$modename: only absolute run-paths are allowed" 1>&2 @@ -1136,11 +1101,11 @@ compiler." ;; -static) - # If we have no pic_flag, then this is the same as -all-static. - if test -z "$pic_flag" && test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi + # The effects of -static are defined in a previous loop. + # We used to do the same as -all-static on platforms that + # didn't have a PIC flag, but the assumption that the effects + # would be equivalent was wrong. It would break on at least + # Digital Unix and AIX. continue ;; @@ -1154,28 +1119,71 @@ compiler." continue ;; + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` + arg= + IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Wl,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` + arg= + IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' + for flag in $args; do + IFS="$save_ifs" + case $flag in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + flag="\"$flag\"" + ;; + esac + arg="$arg $wl$flag" + compiler_flags="$compiler_flags $wl$flag" + linker_flags="$linker_flags $flag" + done + IFS="$save_ifs" + arg=`$echo "X$arg" | $Xsed -e "s/^ //"` + ;; + + -Xcompiler) + prev=xcompiler + continue + ;; + + -Xlinker) + prev=xlinker + continue + ;; + # Some other compiler flag. -* | +*) # Unknown arguments in both finalize_command and compile_command need # to be aesthetically quoted because they are evaled later. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") arg="\"$arg\"" ;; esac ;; - *.o | *.obj | *.a | *.lib) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A library object. + *.lo | *.$objext) + # A library or standard object. if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then + # This file was specified with -dlopen. + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $arg" prev= continue else @@ -1188,357 +1196,890 @@ compiler." # Preload the old-style object. dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` prev= + else + case $arg in + *.lo) libobjs="$libobjs $arg" ;; + *) objs="$objs $arg" ;; + esac fi - libobjs="$libobjs $arg" + ;; + + *.$libext) + # An archive. + deplibs="$deplibs $arg" + old_deplibs="$old_deplibs $arg" + continue ;; *.la) # A libtool-controlled library. - dlname= - libdir= - library_names= - old_library= + if test "$prev" = dlfiles; then + # This library was specified with -dlopen. + dlfiles="$dlfiles $arg" + prev= + elif test "$prev" = dlprefiles; then + # The library was specified with -dlpreopen. + dlprefiles="$dlprefiles $arg" + prev= + else + deplibs="$deplibs $arg" + fi + continue + ;; + + # Some other compiler argument. + *) + # Unknown arguments in both finalize_command and compile_command need + # to be aesthetically quoted because they are evaled later. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac + ;; + esac # arg + + # Now actually substitute the argument into the commands. + if test -n "$arg"; then + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + done # argument parsing loop + + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 + exit 1 + fi + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then + eval arg=\"$export_dynamic_flag_spec\" + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + fi + + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" + + if test -n "$shlibpath_var"; then + # get the directories listed in $shlibpath_var + eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` + else + shlib_search_path= + fi + eval sys_lib_search_path=\"$sys_lib_search_path_spec\" + eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" + + output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` + if test "X$output_objdir" = "X$output"; then + output_objdir="$objdir" + else + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. + if test ! -d $output_objdir; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir + status=$? + if test $status -ne 0 && test ! -d $output_objdir; then + exit $status + fi + fi + + # Determine the type of output + case $output in + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 + exit 1 + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; + *.la) linkmode=lib ;; + *) linkmode=prog ;; # Anything else should be a program. + esac + + specialdeplibs= + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) + for deplib in $deplibs; do + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + libs="$libs $deplib" + done + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries + notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" + for file in $dlfiles $dlprefiles; do + case $file in + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 + exit 1 + ;; + esac + done + ;; + prog) + compile_deplibs= + finalize_deplibs= + alldeplibs=no + newdlfiles= + newdlprefiles= + passes="conv scan dlopen dlpreopen link" + ;; + *) passes="conv" + ;; + esac + for pass in $passes; do + if test $linkmode = prog; then + # Determine which files to process + case $pass in + dlopen) + libs="$dlfiles" + save_deplibs="$deplibs" # Collect dlpreopened libraries + deplibs= + ;; + dlpreopen) libs="$dlprefiles" ;; + link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; + esac + fi + for deplib in $libs; do + lib= + found=no + case $deplib in + -l*) + if test $linkmode = oldlib && test $linkmode = obj; then + $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 + continue + fi + if test $pass = conv; then + deplibs="$deplib $deplibs" + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do + # Search the libtool library + lib="$searchdir/lib${name}.la" + if test -f "$lib"; then + found=yes + break + fi + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library + if test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" + test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue + fi + ;; # -l + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" + test $pass = conv && continue + newdependency_libs="$deplib $newdependency_libs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + prog) + if test $pass = conv; then + deplibs="$deplib $deplibs" + continue + fi + if test $pass = scan; then + deplibs="$deplib $deplibs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + ;; + *) + $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 + ;; + esac # linkmode + continue + ;; # -L + -R*) + if test $pass = link; then + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + # Make sure the xrpath contains only unique directories. + case "$xrpath " in + *" $dir "*) ;; + *) xrpath="$xrpath $dir" ;; + esac + fi + deplibs="$deplib $deplibs" + continue + ;; + *.la) lib="$deplib" ;; + *.$libext) + if test $pass = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) + if test "$deplibs_check_method" != pass_all; then + echo + echo "*** Warning: This library needs some functionality provided by $deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + else + echo + echo "*** Warning: Linking the shared library $output against the" + echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue + ;; + prog) + if test $pass != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi + continue + ;; + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) + if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" + fi + continue + ;; + %DEPLIBS%) + alldeplibs=yes + continue + ;; + esac # case $deplib + if test $found = yes || test -f "$lib"; then : + else + $echo "$modename: cannot find the library \`$lib'" 1>&2 + exit 1 + fi # Check to see that this really is a libtool archive. - if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else - $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2 + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 fi + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` + test "X$ladir" = "X$lib" && ladir="." + + dlname= + dlopen= + dlpreopen= + libdir= + library_names= + old_library= # If the library was installed with an old release of libtool, # it will not redefine variable installed. installed=yes # Read the .la file - # If there is no directory component, then add one. - case "$arg" in - */* | *\\*) . $arg ;; - *) . ./$arg ;; + case $lib in + */* | *\\*) . $lib ;; + *) . ./$lib ;; esac + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || + { test $linkmode = oldlib && test $linkmode = obj; }; then + # Add dl[pre]opened files of deplib + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + + if test $pass = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 + exit 1 + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" + old_convenience="$old_convenience $ladir/$objdir/$old_library" + tmp_libs= + for deplib in $dependency_libs; do + deplibs="$deplib $deplibs" + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + tmp_libs="$tmp_libs $deplib" + done + elif test $linkmode != prog && test $linkmode != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 + exit 1 + fi + continue + fi # $pass = conv + # Get the name of the library we link against. linklib= for l in $old_library $library_names; do linklib="$l" done - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$arg'" 1>&2 + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 exit 1 fi - # Find the relevant object directory and library name. - name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'` - - if test "X$installed" = Xyes; then - dir="$libdir" - else - dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$arg"; then - dir="$objdir" + # This library was specified with -dlopen. + if test $pass = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 + exit 1 + fi + if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking + # statically, we need to preload. + dlprefiles="$dlprefiles $lib" else - dir="$dir/$objdir" + newdlfiles="$newdlfiles $lib" fi - fi - - if test -n "$dependency_libs"; then - # Extract -R and -L from dependency_libs - temp_deplibs= - for deplib in $dependency_libs; do - case "$deplib" in - -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - case " $rpath $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - -L*) case "$compile_command $temp_deplibs " in - *" $deplib "*) ;; - *) temp_deplibs="$temp_deplibs $deplib";; - esac - temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'` - case " $lib_search_path " in - *" $temp_dir "*) ;; - *) lib_search_path="$lib_search_path $temp_dir";; - esac - ;; - *) temp_deplibs="$temp_deplibs $deplib";; - esac - done - dependency_libs="$temp_deplibs" - fi - - if test -z "$libdir"; then - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" - deplibs="$deplibs$dependency_libs" - compile_command="$compile_command $dir/$old_library$dependency_libs" - finalize_command="$finalize_command $dir/$old_library$dependency_libs" continue - fi + fi # $pass = dlopen - # This library was specified with -dlopen. - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking statically, - # we need to preload. - prev=dlprefiles - else - # We should not create a dependency on this library, but we - # may need any libraries it requires. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" - prev= - continue + # We need an absolute path. + case $ladir in + [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; + *) + abs_ladir=`cd "$ladir" && pwd` + if test -z "$abs_ladir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2 + $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 + abs_ladir="$ladir" fi - fi + ;; + esac + laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - # The library was specified with -dlpreopen. - if test "$prev" = dlprefiles; then + # Find the relevant object directory and library name. + if test "X$installed" = Xyes; then + if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then + $echo "$modename: warning: library \`$lib' was moved." 1>&2 + dir="$ladir" + absdir="$abs_ladir" + libdir="$abs_ladir" + else + dir="$libdir" + absdir="$libdir" + fi + else + dir="$ladir/$objdir" + absdir="$abs_ladir/$objdir" + # Remove this search path later + notinst_path="$notinst_path $abs_ladir" + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + + # This library was specified with -dlpreopen. + if test $pass = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 + exit 1 + fi # Prefer using a static library (so that no silly _DYNAMIC symbols # are required to link). if test -n "$old_library"; then - dlprefiles="$dlprefiles $dir/$old_library" + newdlprefiles="$newdlprefiles $dir/$old_library" + # Otherwise, use the dlname, so that lt_dlopen finds it. + elif test -n "$dlname"; then + newdlprefiles="$newdlprefiles $dir/$dlname" else - dlprefiles="$dlprefiles $dir/$linklib" + newdlprefiles="$newdlprefiles $dir/$linklib" fi - prev= + fi # $pass = dlpreopen + + if test -z "$libdir"; then + # Link the convenience library + if test $linkmode = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else + deplibs="$lib $deplibs" + fi + continue fi - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - link_against_libtool_libs="$link_against_libtool_libs $arg" - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac + if test $linkmode = prog && test $pass != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + + linkalldeplibs=no + if test "$link_all_deplibs" != no || test -z "$library_names" || + test "$build_libtool_libs" = no; then + linkalldeplibs=yes fi - # We need an absolute path. - case "$dir" in - [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - absdir="$dir" + tmp_libs= + for deplib in $dependency_libs; do + case $deplib in + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? + if test $linkalldeplibs = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths + # or/and link against static libraries + newdependency_libs="$deplib $newdependency_libs" fi - ;; - esac - - # This is the magic to use -rpath. - # Skip directories that are in the system default run-time - # search path, unless they have been requested with -R. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; esac - ;; - esac + tmp_libs="$tmp_libs $deplib" + done # for deplib + continue + fi # $linkmode = prog... - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in + link_static=no # Whether the deplib will be linked statically + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # Link against this shared library + + if test "$linkmode,$pass" = "prog,link" || + { test $linkmode = lib && test $hardcode_into_libs = yes; }; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. + case " $sys_lib_dlsearch_path " in + *" $absdir "*) ;; + *) + case "$compile_rpath " in + *" $absdir "*) ;; + *) compile_rpath="$compile_rpath $absdir" + esac + ;; + esac + case " $sys_lib_dlsearch_path " in *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" + *) + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" + esac + ;; esac - ;; - esac + if test $linkmode = prog; then + # We need to hardcode the library path + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi + fi + fi # $linkmode,$pass = prog,link... - lib_linked=yes - case "$hardcode_action" in - immediate | unsupported) - if test "$hardcode_direct" = no; then - compile_command="$compile_command $dir/$linklib" - deplibs="$deplibs $dir/$linklib" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - dllsearchdir=`cd "$dir" && pwd || echo "$dir"` - if test -n "$dllsearchpath"; then - dllsearchpath="$dllsearchpath:$dllsearchdir" - else - dllsearchpath="$dllsearchdir" - fi - ;; - esac - elif test "$hardcode_minus_L" = no; then - case "$host" in - *-*-sunos*) - compile_shlibpath="$compile_shlibpath$dir:" + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname + set dummy $library_names + realname="$2" + shift; shift + libname=`eval \\$echo \"$libname_spec\"` + # use dlname if we got it. it's perfectly good, no? + if test -n "$dlname"; then + soname="$dlname" + elif test -n "$soname_spec"; then + # bleh windows + case $host in + *cygwin*) + major=`expr $current - $age` + versuffix="-$major" ;; esac - case "$compile_command " in - *" -L$dir "*) ;; - *) compile_command="$compile_command -L$dir";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -L$dir -l$name" - elif test "$hardcode_shlibpath_var" = no; then - case ":$compile_shlibpath:" in - *":$dir:"*) ;; - *) compile_shlibpath="$compile_shlibpath$dir:";; + eval soname=\"$soname_spec\" + else + soname="$realname" + fi + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" + soname=`echo $soroot | sed -e 's/^.*\///'` + newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + eval cmds=\"$extract_expsyms_cmds\" + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + + # Create $newlib + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + eval cmds=\"$old_archive_from_expsyms_cmds\" + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" + fi + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib + fi # test -n $old_archive_from_expsyms_cmds + + if test $linkmode = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= + lib_linked=yes + case $hardcode_action in + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; + esac + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = no; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + relink) + if test "$hardcode_direct" = yes; then + add="$dir/$linklib" + elif test "$hardcode_minus_L" = yes; then + add_dir="-L$dir" + add="-l$name" + elif test "$hardcode_shlibpath_var" = yes; then + add_shlibpath="$dir" + add="-l$name" + else + lib_linked=no + fi + ;; + *) lib_linked=no ;; + esac + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" + exit 1 + fi + + if test -n "$add_shlibpath"; then + case :$compile_shlibpath: in + *":$add_shlibpath:"*) ;; + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -l$name" + fi + if test $linkmode = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" else - lib_linked=no + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + if test "$hardcode_direct" != yes && \ + test "$hardcode_minus_L" != yes && \ + test "$hardcode_shlibpath_var" = yes; then + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + fi fi - ;; + fi - relink) + if test $linkmode = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= + # Finalize command for both is simple: just hardcode it. if test "$hardcode_direct" = yes; then - compile_command="$compile_command $absdir/$linklib" - deplibs="$deplibs $absdir/$linklib" + add="$libdir/$linklib" elif test "$hardcode_minus_L" = yes; then - case "$compile_command " in - *" -L$absdir "*) ;; - *) compile_command="$compile_command -L$absdir";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -L$absdir -l$name" + add_dir="-L$libdir" + add="-l$name" elif test "$hardcode_shlibpath_var" = yes; then - case ":$compile_shlibpath:" in - *":$absdir:"*) ;; - *) compile_shlibpath="$compile_shlibpath$absdir:";; + case :$finalize_shlibpath: in + *":$libdir:"*) ;; + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -l$name" + add="-l$name" else - lib_linked=no + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + add="-l$name" fi - ;; - - *) - lib_linked=no - ;; - esac - - if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit 1 - fi - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - finalize_command="$finalize_command $libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - case "$finalize_command " in - *" -L$libdir "*) ;; - *) finalize_command="$finalize_command -L$libdir";; - esac - finalize_command="$finalize_command -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case ":$finalize_shlibpath:" in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:";; - esac - finalize_command="$finalize_command -l$name" - else - # We cannot seem to hardcode it, guess we'll fake it. - case "$finalize_command " in - *" -L$dir "*) ;; - *) finalize_command="$finalize_command -L$libdir";; - esac - finalize_command="$finalize_command -l$name" + if test $linkmode = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else + test -n "$add_dir" && deplibs="$add_dir $deplibs" + test -n "$add" && deplibs="$add $deplibs" + fi fi - else - # Transform directly to old archives if we don't build new libraries. - if test -n "$pic_flag" && test -z "$old_library"; then - $echo "$modename: cannot find static library for \`$arg'" 1>&2 - exit 1 + elif test $linkmode = prog; then + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue fi + # Try to link the static library # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. if test "$hardcode_direct" != unsupported; then test -n "$old_library" && linklib="$old_library" - compile_command="$compile_command $dir/$linklib" - finalize_command="$finalize_command $dir/$linklib" + compile_deplibs="$dir/$linklib $compile_deplibs" + finalize_deplibs="$dir/$linklib $finalize_deplibs" else - case "$compile_command " in - *" -L$dir "*) ;; - *) compile_command="$compile_command -L$dir";; - esac - compile_command="$compile_command -l$name" - case "$finalize_command " in - *" -L$dir "*) ;; - *) finalize_command="$finalize_command -L$dir";; - esac - finalize_command="$finalize_command -l$name" + compile_deplibs="-l$name -L$dir $compile_deplibs" + finalize_deplibs="-l$name -L$dir $finalize_deplibs" + fi + elif test "$build_libtool_libs" = yes; then + # Not a shared library + if test "$deplibs_check_method" != pass_all; then + # We're trying link a shared library against a static one + # but the system doesn't support it. + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. + echo + echo "*** Warning: This library needs some functionality provided by $lib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then + echo "*** Therefore, libtool will create a static module, that should work " + echo "*** as long as the dlopening application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi + else + convenience="$convenience $dir/$old_library" + old_convenience="$old_convenience $dir/$old_library" + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + + if test $linkmode = lib; then + if test -n "$dependency_libs" && + { test $hardcode_into_libs != yes || test $build_old_libs = yes || + test $link_static = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do + case $libdir in + -R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'` + case " $xrpath " in + *" $temp_xrpath "*) ;; + *) xrpath="$xrpath $temp_xrpath";; + esac;; + *) temp_deplibs="$temp_deplibs $libdir";; + esac + done + dependency_libs="$temp_deplibs" fi - fi - - # Add in any libraries that this one depends upon. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" - continue - ;; - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - ;; - esac + newlib_search_path="$newlib_search_path $absdir" + # Link against this library + test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" + # ... and its dependency_libs + tmp_libs= + for deplib in $dependency_libs; do + newdependency_libs="$deplib $newdependency_libs" + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + tmp_libs="$tmp_libs $deplib" + done - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" + if test $link_all_deplibs != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in + -L*) path="$deplib" ;; + *.la) + dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'` + test "X$dir" = "X$deplib" && dir="." + # We need an absolute path. + case $dir in + [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; + *) + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 + absdir="$dir" + fi + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then + path="-L$absdir/$objdir" + else + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit 1 + fi + if test "$absdir" != "$libdir"; then + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi + path="-L$absdir" + fi + ;; + *) continue ;; + esac + case " $deplibs " in + *" $path "*) ;; + *) deplibs="$deplibs $path" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs + if test $pass = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done fi - done - - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` - libobjs_save="$libobjs" - - case "$output" in - "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; + if test $pass != dlopen; then + test $pass != scan && dependency_libs="$newdependency_libs" + if test $pass != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do + case "$lib_search_path " in + *" $dir "*) ;; + *) lib_search_path="$lib_search_path $dir" ;; + esac + done + newlib_search_path= + fi - *.a | *.lib) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into archives" 1>&2 - exit 1 + if test "$linkmode,$pass" != "prog,link"; then + vars="deplibs" + else + vars="compile_deplibs finalize_deplibs" + fi + for var in $vars dependency_libs; do + # Add libraries to $var in reverse order + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; + *) + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac + done + tmp_libs= + for deplib in $new_libs; do + case $deplib in + -L*) + case " $tmp_libs " in + *" $deplib "*) ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + ;; + *) tmp_libs="$tmp_libs $deplib" ;; + esac + done + eval $var=\"$tmp_libs\" + done # for var fi - - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 + if test "$pass" = "conv" && + { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then + libs="$deplibs" # reset libs + deplibs= fi + done # for pass + if test $linkmode = prog; then + dlfiles="$newdlfiles" + dlprefiles="$newdlprefiles" + fi + case $linkmode in + oldlib) if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 fi @@ -1566,11 +2107,12 @@ compiler." # Now set the variables for building old libraries. build_libtool_libs=no oldlibs="$output" + objs="$objs$old_deplibs" ;; - *.la) + lib) # Make sure we only generate libraries of the form `libNAME.la'. - case "$outputname" in + case $outputname in lib*) name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` eval libname=\"$libname_spec\" @@ -1591,26 +2133,20 @@ compiler." ;; esac - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - if test -n "$objs"; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1 - exit 1 - fi - - # How the heck are we supposed to write a wrapper for a shared library? - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2 - exit 1 + if test "$deplibs_check_method" != pass_all; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 + exit 1 + else + echo + echo "*** Warning: Linking the shared library $output against the non-libtool" + echo "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi fi - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2 + if test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2 fi set dummy $rpath @@ -1628,7 +2164,6 @@ compiler." build_libtool_libs=convenience build_old_libs=yes fi - dependency_libs="$deplibs" if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 @@ -1655,8 +2190,8 @@ compiler." age="$4" # Check that each of the things are valid numbers. - case "$current" in - 0 | [1-9] | [1-9][0-9]*) ;; + case $current in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 @@ -1664,8 +2199,8 @@ compiler." ;; esac - case "$revision" in - 0 | [1-9] | [1-9][0-9]*) ;; + case $revision in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 @@ -1673,8 +2208,8 @@ compiler." ;; esac - case "$age" in - 0 | [1-9] | [1-9][0-9]*) ;; + case $age in + 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; *) $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 $echo "$modename: \`$vinfo' is not valid version information" 1>&2 @@ -1688,16 +2223,35 @@ compiler." exit 1 fi - # Calculate the version variables. - major= - versuffix= - verstring= - case "$version_type" in - none) ;; + # Calculate the version variables. + major= + versuffix= + verstring= + case $version_type in + none) ;; + + darwin) + # Like Linux, but with the current version available in + # verstring for coding it into the library header + major=.`expr $current - $age` + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` + verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" + ;; + + freebsd-aout) + major=".$current" + versuffix=".$current.$revision"; + ;; + + freebsd-elf) + major=".$current" + versuffix=".$current"; + ;; irix) major=`expr $current - $age + 1` - versuffix="$major.$revision" verstring="sgi$major.$revision" # Add in all the interfaces that we are compatible with. @@ -1707,6 +2261,10 @@ compiler." loop=`expr $loop - 1` verstring="sgi$major.$iface:$verstring" done + + # Before this point, $major must not contain `.'. + major=.$major + versuffix="$major.$revision" ;; linux) @@ -1736,21 +2294,11 @@ compiler." versuffix=".$current.$revision" ;; - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current"; - ;; - windows) - # Like Linux, but with '-' rather than '.', since we only - # want one extension on Windows 95. + # Use '-' rather than '.', since we only want one + # extension on DOS 8.3 filesystems. major=`expr $current - $age` - versuffix="-$major-$age-$revision" + versuffix="-$major" ;; *) @@ -1777,7 +2325,7 @@ compiler." versuffix= verstring="" fi - + # Check to see if the archive will have undefined symbols. if test "$allow_undefined" = yes; then if test "$allow_undefined_flag" = unsupported; then @@ -1789,30 +2337,12 @@ compiler." # Don't allow undefined symbols. allow_undefined_flag="$no_undefined_flag" fi - - dependency_libs="$deplibs" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *) - # Add libc to deplibs on all other systems. - deplibs="$deplibs -lc" - ;; - esac fi - # Create the output directory, or remove our outputs if we need to. - if test -d $output_objdir; then + if test "$mode" != relink; then + # Remove our outputs. $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* - else - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi fi # Now set the variables for building old libraries. @@ -1823,7 +2353,70 @@ compiler." oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` fi + # Eliminate all temporary directories. + for path in $notinst_path; do + lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` + deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` + dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` + done + + if test -n "$xrpath"; then + # If the user specified any rpath flags, then add them. + temp_xrpath= + for libdir in $xrpath; do + temp_xrpath="$temp_xrpath -R$libdir" + case "$finalize_rpath " in + *" $libdir "*) ;; + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done + if test $hardcode_into_libs != yes || test $build_old_libs = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi + + # Make sure dlfiles contains only unique files that won't be dlpreopened + old_dlfiles="$dlfiles" + dlfiles= + for lib in $old_dlfiles; do + case " $dlprefiles $dlfiles " in + *" $lib "*) ;; + *) dlfiles="$dlfiles $lib" ;; + esac + done + + # Make sure dlprefiles contains only unique files + old_dlprefiles="$dlprefiles" + dlprefiles= + for lib in $old_dlprefiles; do + case "$dlprefiles " in + *" $lib "*) ;; + *) dlprefiles="$dlprefiles $lib" ;; + esac + done + if test "$build_libtool_libs" = yes; then + if test -n "$rpath"; then + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) + # these systems don't actually have a c library (as such)! + ;; + *-*-rhapsody* | *-*-darwin1.[012]) + # Rhapsody C library is in the System framework + deplibs="$deplibs -framework System" + ;; + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; + *) + # Add libc to deplibs on all other systems if necessary. + if test $build_libtool_need_lc = "yes"; then + deplibs="$deplibs -lc" + fi + ;; + esac + fi + # Transform deplibs into only deplibs that can be linked in shared. name_save=$name libname_save=$libname @@ -1838,7 +2431,7 @@ compiler." major="" newdeplibs= droppeddeps=no - case "$deplibs_check_method" in + case $deplibs_check_method in pass_all) # Don't check for shared/static. Everything works. # This might be a little naive. We might want to check @@ -1863,7 +2456,7 @@ EOF for i in $deplibs; do name="`expr $i : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then + if test -n "$name" && test "$name" != "0"; then libname=`eval \\$echo \"$libname_spec\"` deplib_matches=`eval \\$echo \"$library_names_spec\"` set dummy $deplib_matches @@ -1888,7 +2481,7 @@ EOF for i in $deplibs; do name="`expr $i : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then + if test -n "$name" && test "$name" != "0"; then $rm conftest $CC -o conftest conftest.c $i # Did it work? @@ -1924,19 +2517,19 @@ EOF ;; file_magic*) set dummy $deplibs_check_method - file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`" + file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` for a_deplib in $deplibs; do name="`expr $a_deplib : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then + if test -n "$name" && test "$name" != "0"; then libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path; do + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do # Follow soft links. if ls -lLd "$potent_lib" 2>/dev/null \ | grep " -> " >/dev/null; then - continue + continue fi # The statement above tries to avoid entering an # endless loop below, in case of cyclic links. @@ -1946,7 +2539,7 @@ EOF potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do potliblink=`ls -ld $potlib | sed 's/.* -> //'` - case "$potliblink" in + case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac @@ -1974,6 +2567,40 @@ EOF fi done # Gone through all deplibs. ;; + match_pattern*) + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do + name="`expr $a_deplib : '-l\(.*\)'`" + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then + libname=`eval \\$echo \"$libname_spec\"` + for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do + potential_libs=`ls $i/$libname[.-]* 2>/dev/null` + for potent_lib in $potential_libs; do + if eval echo \"$potent_lib\" 2>/dev/null \ + | sed 10q \ + | egrep "$match_pattern_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi + done + done + if test -n "$a_deplib" ; then + droppeddeps=yes + echo + echo "*** Warning: This library needs some functionality provided by $a_deplib." + echo "*** I have the capability to make that library automatically link in when" + echo "*** you link to this library. But I can only do this if you have a" + echo "*** shared version of the library, which you do not appear to have." + fi + else + # Add a -L argument. + newdeplibs="$newdeplibs $a_deplib" + fi + done # Gone through all deplibs. + ;; none | unknown | *) newdeplibs="" if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ @@ -1996,6 +2623,13 @@ EOF libname=$libname_save name=$name_save + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + if test "$droppeddeps" = yes; then if test "$module" = yes; then echo @@ -2021,6 +2655,21 @@ EOF echo "*** The inter-library dependencies that have been dropped here will be" echo "*** automatically added whenever a program is linked with this library" echo "*** or is declared to -dlopen it." + + if test $allow_undefined = no; then + echo + echo "*** Since this library must not contain undefined symbols," + echo "*** because either the platform does not support them or" + echo "*** it was explicitly requested with -no-undefined," + echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module + build_old_libs=yes + else + build_libtool_libs=no + fi + fi fi fi # Done checking deplibs! @@ -2031,9 +2680,64 @@ EOF library_names= old_library= dlname= - + # Test again, we may have decided not to build it any more if test "$build_libtool_libs" = yes; then + if test $hardcode_into_libs = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= + rpath="$finalize_rpath" + test "$mode" != relink && rpath="$compile_rpath$rpath" + for libdir in $rpath; do + if test -n "$hardcode_libdir_flag_spec"; then + if test -n "$hardcode_libdir_separator"; then + if test -z "$hardcode_libdirs"; then + hardcode_libdirs="$libdir" + else + # Just accumulate the unique libdirs. + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in + *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) + ;; + *) + hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" + ;; + esac + fi + else + eval flag=\"$hardcode_libdir_flag_spec\" + dep_rpath="$dep_rpath $flag" + fi + elif test -n "$runpath_var"; then + case "$perm_rpath " in + *" $libdir "*) ;; + *) perm_rpath="$perm_rpath $libdir" ;; + esac + fi + done + # Substitute the hardcoded libdirs into the rpath. + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" + eval dep_rpath=\"$hardcode_libdir_flag_spec\" + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. + rpath= + for dir in $perm_rpath; do + rpath="$rpath$dir:" + done + eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" + fi + test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" + fi + + shlibpath="$finalize_shlibpath" + test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" + if test -n "$shlibpath"; then + eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" + fi + # Get the real and link names of the library. eval library_names=\"$library_names_spec\" set dummy $library_names @@ -2045,6 +2749,7 @@ EOF else soname="$realname" fi + test -z "$dlname" && dlname=$soname lib="$output_objdir/$realname" for link @@ -2116,7 +2821,7 @@ EOF for xlib in $convenience; do # Extract the objects. - case "$xlib" in + case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac @@ -2141,7 +2846,12 @@ EOF if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then eval flag=\"$thread_safe_flag_spec\" - linkopts="$linkopts $flag" + linker_flags="$linker_flags $flag" + fi + + # Make a backup of the uninstalled library when relinking + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $? fi # Do each of the archive commands. @@ -2158,6 +2868,12 @@ EOF done IFS="$save_ifs" + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? + exit 0 + fi + # Create links to the real library. for linkname in $linknames; do if test "$realname" != "$linkname"; then @@ -2174,12 +2890,7 @@ EOF fi ;; - *.lo | *.o | *.obj) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into objects" 1>&2 - exit 1 - fi - + obj) if test -n "$deplibs"; then $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 fi @@ -2204,9 +2915,9 @@ EOF $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 fi - case "$output" in + case $output in *.lo) - if test -n "$objs"; then + if test -n "$objs$old_deplibs"; then $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 exit 1 fi @@ -2230,7 +2941,7 @@ EOF gentop= # reload_cmds runs $LD directly, so let us get rid of # -Wl from whole_archive_flag_spec - wl= + wl= if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then @@ -2249,7 +2960,7 @@ EOF for xlib in $convenience; do # Extract the objects. - case "$xlib" in + case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac @@ -2273,7 +2984,7 @@ EOF fi # Create the old-style object. - reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test output="$obj" eval cmds=\"$reload_cmds\" @@ -2308,7 +3019,7 @@ EOF exit 0 fi - if test -n "$pic_flag"; then + if test -n "$pic_flag" || test "$pic_mode" != default; then # Only do commands if we really have different PIC objects. reload_objs="$libobjs $reload_conv_objs" output="$libobj" @@ -2344,8 +3055,10 @@ EOF exit 0 ;; - # Anything else should be a program. - *) + prog) + case $host in + *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; + esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 fi @@ -2355,20 +3068,27 @@ EOF fi if test "$preload" = yes; then - if test "$dlopen" = unknown && test "$dlopen_self" = unknown && + if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown && test "$dlopen_self_static" = unknown; then $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi + fi fi - + + case $host in + *-*-rhapsody* | *-*-darwin1.[012]) + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + ;; + esac + + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + if test -n "$rpath$xrpath"; then # If the user specified any rpath flags, then add them. for libdir in $rpath $xrpath; do # This is the magic to use -rpath. - case "$compile_rpath " in - *" $libdir "*) ;; - *) compile_rpath="$compile_rpath $libdir" ;; - esac case "$finalize_rpath " in *" $libdir "*) ;; *) finalize_rpath="$finalize_rpath $libdir" ;; @@ -2386,7 +3106,7 @@ EOF hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) @@ -2404,6 +3124,14 @@ EOF *) perm_rpath="$perm_rpath $libdir" ;; esac fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac + ;; + esac done # Substitute the hardcoded libdirs into the rpath. if test -n "$hardcode_libdir_separator" && @@ -2422,7 +3150,7 @@ EOF hardcode_libdirs="$libdir" else # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in + case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) ;; *) @@ -2449,23 +3177,6 @@ EOF fi finalize_rpath="$rpath" - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - - # Create the binary in the object directory, then wrap it. - if test ! -d $output_objdir; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi - fi - if test -n "$libobjs" && test "$build_old_libs" = yes; then # Transform all the library objects into standard objects. compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` @@ -2482,7 +3193,7 @@ EOF fi if test -n "$dlsyms"; then - case "$dlsyms" in + case $dlsyms in "") ;; *.c) # Discover the nlist of each of the dlfiles. @@ -2514,7 +3225,7 @@ extern \"C\" { test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` for arg in $progfiles; do $show "extracting global C symbols from \`$arg'" $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" @@ -2524,7 +3235,7 @@ extern \"C\" { $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' fi - + if test -n "$export_symbols_regex"; then $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' $run eval '$mv "$nlist"T "$nlist"' @@ -2613,13 +3324,13 @@ static const void *lt_preloaded_setup() { fi pic_flag_for_symtable= - case "$host" in + case $host in # compiling the symbol table file with pic_flag works around # a FreeBSD bug that causes programs to crash when -lm is # linked before any other PIC object. But we must not use # pic_flag when linking with -static. The problem exists in # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) case "$compile_command " in *" -static "*) ;; *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; @@ -2658,7 +3369,7 @@ static const void *lt_preloaded_setup() { finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` fi - if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then + if test $need_relink = no || test "$build_libtool_libs" != yes; then # Replace the output file specification. compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` link_command="$compile_command$compile_rpath" @@ -2667,7 +3378,7 @@ static const void *lt_preloaded_setup() { $show "$link_command" $run eval "$link_command" status=$? - + # Delete the generated files. if test -n "$dlsyms"; then $show "$rm $output_objdir/${outputname}S.${objext}" @@ -2681,7 +3392,7 @@ static const void *lt_preloaded_setup() { # We should set the shlibpath_var rpath= for dir in $temp_rpath; do - case "$dir" in + case $dir in [\\/]* | [A-Za-z]:[\\/]*) # Absolute path. rpath="$rpath$dir:" @@ -2723,11 +3434,24 @@ static const void *lt_preloaded_setup() { fi fi + if test "$no_install" = yes; then + # We don't need to create a wrapper script. + link_command="$compile_var$compile_command$compile_rpath" + # Replace the output file specification. + link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + # Delete the old output file. + $run $rm $output + # Link the executable and exit + $show "$link_command" + $run eval "$link_command" || exit $? + exit 0 + fi + if test "$hardcode_action" = relink; then # Fast installation is not supported link_command="$compile_var$compile_command$compile_rpath" relink_command="$finalize_var$finalize_command$finalize_rpath" - + $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 $echo "$modename: \`$output' will be relinked during installation" 1>&2 else @@ -2747,7 +3471,7 @@ static const void *lt_preloaded_setup() { # Replace the output file specification. link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - + # Delete the old output files. $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname @@ -2759,12 +3483,24 @@ static const void *lt_preloaded_setup() { # Quote the relink command for shipping. if test -n "$relink_command"; then + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + relink_command="cd `pwd`; $relink_command" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi # Quote $echo for shipping. if test "X$echo" = "X$SHELL $0 --fallback-echo"; then - case "$0" in + case $0 in [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; *) qecho="$SHELL `pwd`/$0 --fallback-echo";; esac @@ -2780,6 +3516,11 @@ static const void *lt_preloaded_setup() { case $output in *.exe) output=`echo $output|sed 's,.exe$,,'` ;; esac + # test for cygwin because mv fails w/o .exe extensions + case $host in + *cygwin*) exeext=.exe ;; + *) exeext= ;; + esac $rm $output trap "$rm $output; exit 1" 1 2 15 @@ -2809,7 +3550,7 @@ relink_command=\"$relink_command\" # This environment variable determines our operation mode. if test \"\$libtool_install_magic\" = \"$magic\"; then # install mode needs the following variable: - link_against_libtool_libs='$link_against_libtool_libs' + notinst_deplibs='$notinst_deplibs' else # When we are sourced in execute mode, \$file and \$echo are already set. if test \"\$libtool_execute_magic\" != \"$magic\"; then @@ -2842,7 +3583,7 @@ else # If there was a directory component, then change thisdir. if test \"x\$destdir\" != \"x\$file\"; then case \"\$destdir\" in - [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;; + [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; *) thisdir=\"\$thisdir/\$destdir\" ;; esac fi @@ -2858,9 +3599,9 @@ else if test "$fast_install" = yes; then echo >> $output "\ - program=lt-'$outputname' + program=lt-'$outputname'$exeext progdir=\"\$thisdir/$objdir\" - + if test ! -f \"\$progdir/\$program\" || \\ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then @@ -2877,7 +3618,7 @@ else # relink executable if necessary if test -n \"\$relink_command\"; then - if (cd \"\$thisdir\" && eval \$relink_command); then : + if (eval \$relink_command); then : else $rm \"\$progdir/\$file\" exit 1 @@ -2927,13 +3668,21 @@ else # Run the actual program with our arguments. " case $host in - *-*-cygwin* | *-*-mingw | *-*-os2*) - # win32 systems need to use the prog path for dll - # lookup to work + # win32 systems need to use the prog path for dll + # lookup to work + *-*-cygwin* | *-*-pw32*) + $echo >> $output "\ + exec \$progdir/\$program \${1+\"\$@\"} +" + ;; + + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) $echo >> $output "\ exec \$progdir\\\\\$program \${1+\"\$@\"} " ;; + *) $echo >> $output "\ # Export the path to the program. @@ -2975,7 +3724,7 @@ fi\ oldobjs="$libobjs_save" build_libtool_libs=no else - oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` + oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` fi addlibs="$old_convenience" fi @@ -2991,11 +3740,11 @@ fi\ exit $status fi generated="$generated $gentop" - + # Add in members from convenience archives. for xlib in $addlibs; do # Extract the objects. - case "$xlib" in + case $xlib in [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; *) xabs=`pwd`"/$xlib" ;; esac @@ -3056,19 +3805,26 @@ fi\ fi # Now create the libtool archive. - case "$output" in + case $output in *.la) old_library= test "$build_old_libs" = yes && old_library="$libname.$libext" $show "creating $output" - if test -n "$xrpath"; then - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - done - dependency_libs="$temp_xrpath $dependency_libs" - fi + # Preserve any variables that may affect compiler behavior + for var in $variables_saved_for_relink; do + if eval test -z \"\${$var+set}\"; then + relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" + elif eval var_value=\$$var; test -z "$var_value"; then + relink_command="$var=; export $var; $relink_command" + else + var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"` + relink_command="$var=\"$var_value\"; export $var; $relink_command" + fi + done + # Quote the link command for shipping. + relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` # Only create the output if not a dry run. if test -z "$run"; then @@ -3078,8 +3834,52 @@ fi\ break fi output="$output_objdir/$outputname"i + # Replace all uninstalled libtool libraries with the installed ones + newdependency_libs= + for deplib in $dependency_libs; do + case $deplib in + *.la) + name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdependency_libs="$newdependency_libs $libdir/$name" + ;; + *) newdependency_libs="$newdependency_libs $deplib" ;; + esac + done + dependency_libs="$newdependency_libs" + newdlfiles= + for lib in $dlfiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdlfiles="$newdlfiles $libdir/$name" + done + dlfiles="$newdlfiles" + newdlprefiles= + for lib in $dlprefiles; do + name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` + eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + exit 1 + fi + newdlprefiles="$newdlprefiles $libdir/$name" + done + dlprefiles="$newdlprefiles" fi $rm $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in + *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac $echo > $output "\ # $outputname - a libtool library file # Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP @@ -3088,7 +3888,7 @@ fi\ # It is necessary for linking the library. # The name that we can dlopen(3). -dlname='$dlname' +dlname='$tdlname' # Names of this library. library_names='$library_names' @@ -3107,16 +3907,23 @@ revision=$revision # Is this an already installed library? installed=$installed +# Files to dlopen/dlpreopen +dlopen='$dlfiles' +dlpreopen='$dlprefiles' + # Directory that this library needs to be installed in: -libdir='$install_libdir'\ -" +libdir='$install_libdir'" + if test "$installed" = no && test $need_relink = yes; then + $echo >> $output "\ +relink_command=\"$relink_command\"" + fi done fi # Do a symbolic link so that the libtool archive can be found in # LD_LIBRARY_PATH before the program is installed. $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $? + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? ;; esac exit 0 @@ -3128,10 +3935,12 @@ libdir='$install_libdir'\ # There may be an optional sh(1) argument at the beginning of # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. + $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then # Aesthetically quote it. arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case "$arg" in + case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; @@ -3147,7 +3956,7 @@ libdir='$install_libdir'\ # The real first argument should be the name of the installation program. # Aesthetically quote it. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in + case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; @@ -3170,7 +3979,7 @@ libdir='$install_libdir'\ continue fi - case "$arg" in + case $arg in -d) isdir=yes ;; -f) prev="-f" ;; -g) prev="-g" ;; @@ -3195,7 +4004,7 @@ libdir='$install_libdir'\ # Aesthetically quote the argument. arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in + case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) arg="\"$arg\"" ;; @@ -3246,11 +4055,11 @@ libdir='$install_libdir'\ exit 1 fi fi - case "$destdir" in + case $destdir in [\\/]* | [A-Za-z]:[\\/]*) ;; *) for file in $files; do - case "$file" in + case $file in *.lo) ;; *) $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 @@ -3272,8 +4081,8 @@ libdir='$install_libdir'\ for file in $files; do # Do each installation. - case "$file" in - *.a | *.lib) + case $file in + *.$libext) # Do the static libraries later. staticlibs="$staticlibs $file" ;; @@ -3289,8 +4098,9 @@ libdir='$install_libdir'\ library_names= old_library= + relink_command= # If there is no directory component, then add one. - case "$file" in + case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac @@ -3309,10 +4119,20 @@ libdir='$install_libdir'\ esac fi - dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/" + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/ test "X$dir" = "X$file/" && dir= dir="$dir$objdir" + if test -n "$relink_command"; then + $echo "$modename: warning: relinking \`$file'" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 + continue + fi + fi + # See the names of the shared library. set dummy $library_names if test -n "$2"; then @@ -3320,9 +4140,16 @@ libdir='$install_libdir'\ shift shift + srcname="$realname" + test -n "$relink_command" && srcname="$realname"T + # Install the shared library and build the symlinks. - $show "$install_prog $dir/$realname $destdir/$realname" - $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $? + $show "$install_prog $dir/$srcname $destdir/$realname" + $run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$striplib $destdir/$realname" + $run eval "$striplib $destdir/$realname" || exit $? + fi if test $# -gt 0; then # Delete the old symlinks, and create new ones. @@ -3369,11 +4196,11 @@ libdir='$install_libdir'\ fi # Deduce the name of the destination old-style object file. - case "$destfile" in + case $destfile in *.lo) staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` ;; - *.o | *.obj) + *.$objext) staticdest="$destfile" destfile= ;; @@ -3412,39 +4239,46 @@ libdir='$install_libdir'\ # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - link_against_libtool_libs= + notinst_deplibs= relink_command= # If there is no directory component, then add one. - case "$file" in + case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac # Check the variables that should have been set. - if test -z "$link_against_libtool_libs"; then + if test -z "$notinst_deplibs"; then $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 exit 1 fi finalize=yes - for lib in $link_against_libtool_libs; do + for lib in $notinst_deplibs; do # Check to see that each library is installed. libdir= if test -f "$lib"; then # If there is no directory component, then add one. - case "$lib" in + case $lib in */* | *\\*) . $lib ;; *) . ./$lib ;; esac fi - libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`" + libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test if test -n "$libdir" && test ! -f "$libfile"; then $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 finalize=no fi done + relink_command= + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; + *) . ./$file ;; + esac + outputname= if test "$fast_install" = no && test -n "$relink_command"; then if test "$finalize" = yes && test -z "$run"; then @@ -3456,6 +4290,7 @@ libdir='$install_libdir'\ $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 continue fi + file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` outputname="$tmpdir/$file" # Replace the output file specification. relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` @@ -3477,6 +4312,23 @@ libdir='$install_libdir'\ fi fi + # remove .exe since cygwin /usr/bin/install will append another + # one anyways + case $install_prog,$host in + /usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok + ;; + *.exe:*) + destfile=$destfile.exe + ;; + *:*.exe) + destfile=`echo $destfile | sed -e 's,.exe$,,'` + ;; + esac + ;; + esac $show "$install_prog$stripme $file $destfile" $run eval "$install_prog\$stripme \$file \$destfile" || exit $? test -n "$outputname" && ${rm}r "$tmpdir" @@ -3493,6 +4345,11 @@ libdir='$install_libdir'\ $show "$install_prog $file $oldlib" $run eval "$install_prog \$file \$oldlib" || exit $? + if test -n "$stripme" && test -n "$striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + # Do each command in the postinstall commands. eval cmds=\"$old_postinstall_cmds\" IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' @@ -3553,7 +4410,7 @@ libdir='$install_libdir'\ fi # Exit here if they wanted silent mode. - test "$show" = : && exit 0 + test "$show" = ":" && exit 0 echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" @@ -3563,7 +4420,7 @@ libdir='$install_libdir'\ echo echo "If you ever happen to want to link against installed libraries" echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use \`-LLIBDIR'" + echo "specify the full pathname of the library, or use the \`-LLIBDIR'" echo "flag during linking and do at least one of the following:" if test -n "$shlibpath_var"; then echo " - add LIBDIR to the \`$shlibpath_var' environment variable" @@ -3613,7 +4470,7 @@ libdir='$install_libdir'\ fi dir= - case "$file" in + case $file in *.la) # Check to see that this really is a libtool archive. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : @@ -3628,7 +4485,7 @@ libdir='$install_libdir'\ library_names= # If there is no directory component, then add one. - case "$file" in + case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac @@ -3683,13 +4540,13 @@ libdir='$install_libdir'\ args= for file do - case "$file" in + case $file in -*) ;; *) # Do a test to see if this is really a libtool program. if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. - case "$file" in + case $file in */* | *\\*) . $file ;; *) . ./$file ;; esac @@ -3706,8 +4563,8 @@ libdir='$install_libdir'\ if test -z "$run"; then if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" + # Export the shlibpath_var. + eval "export $shlibpath_var" fi # Restore saved enviroment variables @@ -3726,23 +4583,30 @@ libdir='$install_libdir'\ else # Display what would be done. if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" + eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" + $echo "export $shlibpath_var" fi $echo "$cmd$args" exit 0 fi ;; - # libtool uninstall mode - uninstall) - modename="$modename: uninstall" + # libtool clean and uninstall mode + clean | uninstall) + modename="$modename: $mode" rm="$nonopt" files= + rmforce= + exit_status=0 + + # This variable tells wrapper scripts just to set variables rather + # than running their programs. + libtool_install_magic="$magic" for arg do - case "$arg" in + case $arg in + -f) rm="$rm $arg"; rmforce=yes ;; -*) rm="$rm $arg" ;; *) files="$files $arg" ;; esac @@ -3754,14 +4618,42 @@ libdir='$install_libdir'\ exit 1 fi + rmdirs= + for file in $files; do dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. + if test "X$dir" = "X$file"; then + dir=. + objdir="$objdir" + else + objdir="$dir/$objdir" + fi name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` + test $mode = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates + if test $mode = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; + esac + fi + + # Don't error if the file doesn't exist and rm -f was used. + if (test -L "$file") >/dev/null 2>&1 \ + || (test -h "$file") >/dev/null 2>&1 \ + || test -f "$file"; then + : + elif test -d "$file"; then + exit_status=1 + continue + elif test "$rmforce" = yes; then + continue + fi rmfiles="$file" - case "$name" in + case $name in *.la) # Possibly a libtool archive, so verify it. if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then @@ -3769,38 +4661,43 @@ libdir='$install_libdir'\ # Delete the libtool libraries and symlinks. for n in $library_names; do - rmfiles="$rmfiles $dir/$n" + rmfiles="$rmfiles $objdir/$n" done - test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library" - - $show "$rm $rmfiles" - $run $rm $rmfiles - - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" + test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + + if test $mode = uninstall; then + if test -n "$library_names"; then + # Do each command in the postuninstall commands. + eval cmds=\"$postuninstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + if test $? != 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" - fi + fi - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. + eval cmds=\"$old_postuninstall_cmds\" + IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" + if test $? != 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. fi - - # FIXME: should reinstall the best remaining shared library. fi ;; @@ -3809,17 +4706,35 @@ libdir='$install_libdir'\ oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` rmfiles="$rmfiles $dir/$oldobj" fi - $show "$rm $rmfiles" - $run $rm $rmfiles ;; *) - $show "$rm $rmfiles" - $run $rm $rmfiles + # Do a test to see if this is a libtool program. + if test $mode = clean && + (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + relink_command= + . $dir/$file + + rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" + if test "$fast_install" = yes && test -n "$relink_command"; then + rmfiles="$rmfiles $objdir/lt-$name" + fi + fi ;; esac + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 done - exit 0 + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do + if test -d "$dir"; then + $show "rmdir $dir" + $run rmdir $dir >/dev/null 2>&1 + fi + done + + exit $exit_status ;; "") @@ -3835,7 +4750,7 @@ libdir='$install_libdir'\ fi # test -z "$show_help" # We need to display help for each of the modes. -case "$mode" in +case $mode in "") $echo \ "Usage: $modename [OPTION]... [MODE-ARG]... @@ -3854,6 +4769,7 @@ Provide generalized library-building support services. MODE must be one of the following: + clean remove files from the build directory compile compile a source file into a libtool object execute automatically set library path, then run a program finish complete the installation of libtool libraries @@ -3866,6 +4782,20 @@ a more detailed description of MODE." exit 0 ;; +clean) + $echo \ +"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE... + +Remove files from the build directory. + +RM is the name of the program to use to delete files associated with each FILE +(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed +to RM. + +If FILE is a libtool library, object or program, all the files associated +with it are deleted. Otherwise, only FILE itself is deleted using RM." + ;; + compile) $echo \ "Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE @@ -3875,6 +4805,8 @@ Compile a source file into a libtool library object. This mode accepts the following additional options: -o OUTPUT-FILE set the output file name to OUTPUT-FILE + -prefer-pic try to building PIC objects only + -prefer-non-pic try to building non-PIC objects only -static always build a \`.o' file suitable for static linking COMPILE-COMMAND is a command to be used in creating a \`standard' object file @@ -3954,6 +4886,8 @@ The following components of LINK-COMMAND are treated specially: -LLIBDIR search LIBDIR for required installed libraries -lNAME OUTPUT-FILE requires the installed library libNAME -module build a library that can dlopened + -no-fast-install disable the fast-install mode + -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects -release RELEASE specify package release information diff --git a/srclib/pcre/maketables.c b/srclib/pcre/maketables.c index c0f06c0375..01078f19e6 100644 --- a/srclib/pcre/maketables.c +++ b/srclib/pcre/maketables.c @@ -8,7 +8,7 @@ and semantics are as close as possible to those of the Perl 5 language. Written by: Philip Hazel - Copyright (c) 1997-2000 University of Cambridge + Copyright (c) 1997-2001 University of Cambridge ----------------------------------------------------------------------------- Permission is granted to anyone to use this software for any purpose on any @@ -58,7 +58,7 @@ Arguments: none Returns: pointer to the contiguous block of data */ -unsigned const char * +const unsigned char * pcre_maketables(void) { unsigned char *yield, *p; diff --git a/srclib/pcre/pcreposix.h b/srclib/pcre/pcreposix.h index 7660acbd55..e70af2de84 100644 --- a/srclib/pcre/pcreposix.h +++ b/srclib/pcre/pcreposix.h @@ -2,7 +2,7 @@ * Perl-Compatible Regular Expressions * *************************************************/ -/* Copyright (c) 1997-2000 University of Cambridge */ +/* Copyright (c) 1997-2001 University of Cambridge */ #ifndef _PCREPOSIX_H #define _PCREPOSIX_H diff --git a/srclib/pcre/perltest b/srclib/pcre/perltest index 1e96c792b9..e6f797498c 100755 --- a/srclib/pcre/perltest +++ b/srclib/pcre/perltest @@ -9,7 +9,7 @@ sub pchars { my($t) = ""; -foreach $c (split(//, @_[0])) +foreach $c (split(//, $_[0])) { if (ord $c >= 32 && ord $c < 127) { $t .= $c; } else { $t .= sprintf("\\x%02x", ord $c); } diff --git a/srclib/pcre/study.c b/srclib/pcre/study.c index 676db94665..f924543d21 100644 --- a/srclib/pcre/study.c +++ b/srclib/pcre/study.c @@ -9,7 +9,7 @@ the file Tech.Notes for some information on the internals. Written by: Philip Hazel - Copyright (c) 1997-2000 University of Cambridge + Copyright (c) 1997-2001 University of Cambridge ----------------------------------------------------------------------------- Permission is granted to anyone to use this software for any purpose on any @@ -104,8 +104,6 @@ do while (try_next) { - try_next = FALSE; - /* If a branch starts with a bracket or a positive lookahead assertion, recurse to set bits from within them. That's all for this branch. */ @@ -113,6 +111,7 @@ do { if (!set_start_bits(tcode, start_bits, caseless, cd)) return FALSE; + try_next = FALSE; } else switch(*tcode) @@ -120,12 +119,17 @@ do default: return FALSE; + /* Skip over extended extraction bracket number */ + + case OP_BRANUMBER: + tcode += 3; + break; + /* Skip over lookbehind and negative lookahead assertions */ case OP_ASSERT_NOT: case OP_ASSERTBACK: case OP_ASSERTBACK_NOT: - try_next = TRUE; do tcode += (tcode[1] << 8) + tcode[2]; while (*tcode == OP_ALT); tcode += 3; break; @@ -135,7 +139,6 @@ do case OP_OPT: caseless = (tcode[1] & PCRE_CASELESS) != 0; tcode += 2; - try_next = TRUE; break; /* BRAZERO does the bracket, but carries on. */ @@ -147,7 +150,6 @@ do dummy = 1; do tcode += (tcode[1] << 8) + tcode[2]; while (*tcode == OP_ALT); tcode += 3; - try_next = TRUE; break; /* Single-char * or ? sets the bit and tries the next item */ @@ -158,7 +160,6 @@ do case OP_MINQUERY: set_bit(start_bits, tcode[1], caseless, cd); tcode += 2; - try_next = TRUE; break; /* Single-char upto sets the bit and tries the next */ @@ -167,7 +168,6 @@ do case OP_MINUPTO: set_bit(start_bits, tcode[3], caseless, cd); tcode += 4; - try_next = TRUE; break; /* At least one single char sets the bit and stops */ @@ -181,6 +181,7 @@ do case OP_PLUS: case OP_MINPLUS: set_bit(start_bits, tcode[1], caseless, cd); + try_next = FALSE; break; /* Single character type sets the bits and stops */ @@ -188,31 +189,37 @@ do case OP_NOT_DIGIT: for (c = 0; c < 32; c++) start_bits[c] |= ~cd->cbits[c+cbit_digit]; + try_next = FALSE; break; case OP_DIGIT: for (c = 0; c < 32; c++) start_bits[c] |= cd->cbits[c+cbit_digit]; + try_next = FALSE; break; case OP_NOT_WHITESPACE: for (c = 0; c < 32; c++) start_bits[c] |= ~cd->cbits[c+cbit_space]; + try_next = FALSE; break; case OP_WHITESPACE: for (c = 0; c < 32; c++) start_bits[c] |= cd->cbits[c+cbit_space]; + try_next = FALSE; break; case OP_NOT_WORDCHAR: for (c = 0; c < 32; c++) start_bits[c] |= ~cd->cbits[c+cbit_word]; + try_next = FALSE; break; case OP_WORDCHAR: for (c = 0; c < 32; c++) start_bits[c] |= cd->cbits[c+cbit_word]; + try_next = FALSE; break; /* One or more character type fudges the pointer and restarts, knowing @@ -221,12 +228,10 @@ do case OP_TYPEPLUS: case OP_TYPEMINPLUS: tcode++; - try_next = TRUE; break; case OP_TYPEEXACT: tcode += 3; - try_next = TRUE; break; /* Zero or more repeats of character types set the bits and then @@ -274,7 +279,6 @@ do } tcode += 2; - try_next = TRUE; break; /* Character class: set the bits and either carry on or not, @@ -292,16 +296,16 @@ do case OP_CRQUERY: case OP_CRMINQUERY: tcode++; - try_next = TRUE; break; case OP_CRRANGE: case OP_CRMINRANGE: - if (((tcode[1] << 8) + tcode[2]) == 0) - { - tcode += 5; - try_next = TRUE; - } + if (((tcode[1] << 8) + tcode[2]) == 0) tcode += 5; + else try_next = FALSE; + break; + + default: + try_next = FALSE; break; } } diff --git a/srclib/pcre/testdata/testinput1 b/srclib/pcre/testdata/testinput1 index d72a2c580b..66df9b3d79 100644 --- a/srclib/pcre/testdata/testinput1 +++ b/srclib/pcre/testdata/testinput1 @@ -1441,10 +1441,6 @@ ABCabc abcABC -/(main(O)?)+/ - mainmain - mainOmain - /ab{3cd/ ab{3cd @@ -1898,4 +1894,57 @@ //g abc -/ End of test input / +/]{0,})>]{0,})>([\d]{0,}\.)(.*)((
([\w\W\s\d][^<>]{0,})|[\s]{0,}))<\/a><\/TD>]{0,})>([\w\W\s\d][^<>]{0,})<\/TD>]{0,})>([\w\W\s\d][^<>]{0,})<\/TD><\/TR>/is + 43.Word Processor
(N-1286)Lega lstaff.comCA - Statewide + +/a[^a]b/ + acb + a\nb + +/a.b/ + acb + *** Failers + a\nb + +/a[^a]b/s + acb + a\nb + +/a.b/s + acb + a\nb + +/^(b+?|a){1,2}?c/ + bac + bbac + bbbac + bbbbac + bbbbbac + +/^(b+|a){1,2}?c/ + bac + bbac + bbbac + bbbbac + bbbbbac + +/(?!\A)x/m + x\nb\n + a\bx\n + +/\x0{ab}/ + \0{ab} + +/(A|B)*?CD/ + CD + +/(A|B)*CD/ + CD + +/(AB)*?\1/ + ABABAB + +/(AB)*\1/ + ABABAB + +/ End of testinput1 / diff --git a/srclib/pcre/testdata/testinput2 b/srclib/pcre/testdata/testinput2 index 1d9504cec2..f41478e104 100644 --- a/srclib/pcre/testdata/testinput2 +++ b/srclib/pcre/testdata/testinput2 @@ -40,8 +40,6 @@ /[\B]/ -/[a-\w]/ - /[z-a]/ /^*/ @@ -707,4 +705,19 @@ Ab AB -/ End of test input / +/[\200-\410]/ + +/^(?(0)f|b)oo/ + +/This one's here because of the large output vector needed/ + +/(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\d+(?:\s|$))(\w+)\s+(\270)/ + \O900 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 ABC ABC + +/This one's here because Perl does this differently and PCRE can't at present/ + +/(main(O)?)+/ + mainmain + mainOmain + +/ End of testinput2 / diff --git a/srclib/pcre/testdata/testinput4 b/srclib/pcre/testdata/testinput4 index c23b52aceb..f2878965f6 100644 --- a/srclib/pcre/testdata/testinput4 +++ b/srclib/pcre/testdata/testinput4 @@ -62,3 +62,4 @@ *** Failers école +/ End of testinput4 /