From: Patrick McConnell Date: Fri, 6 Dec 2002 22:29:14 +0000 (+0000) Subject: Removed dos linefeeds, test this before doing rest of bcb5 X-Git-Tag: R_1_95_6~54 X-Git-Url: https://granicus.if.org/sourcecode?a=commitdiff_plain;h=f4f555f8a5a487627de362182f62c6cce8dac203;p=libexpat Removed dos linefeeds, test this before doing rest of bcb5 --- diff --git a/expat/bcb5/README.txt b/expat/bcb5/README.txt index cfa27832..000a76c9 100644 --- a/expat/bcb5/README.txt +++ b/expat/bcb5/README.txt @@ -1,87 +1,87 @@ - - Using a Borland compiler product - -The files in this directory support using both the free Borland -command-line compiler tools and the Borland C++ Builder IDE. The -project files have been tested with both versions 5 and 6 of the C++ -Builder product. - - Using the free BCC32 command line compiler - -After downloading and installing the free C++ Builder commandline -version, perform the following steps (assuming it was installed under -C:\Borland\BCC55): - -1) Add "C:\Borland\BCC55\BIN" to your path -2) Set the environment variable BCB to "C:\Borland\BCC55". -3) edit makefile.mak: enable or comment out the appropriate commands - under clean & distclean, depending on whether your OS can use - deltree /y or del /s/f/q. - -After that, you should simply cd to the bcb5 directory in your Expat -directory tree (same structure as CVS) and run "make all". - - Naming - -The libraries have the base name "libexpat" followed optionally by an -"s" (static) or a "w" (unicode version), then an underscore and -optionally "mt" (multi-threaded) and "d" (dynamic RTL). - -To change the name of the library a project file produces, edit the -project option source (see step 1 under Unicode below) and change -the name contained in the PROJECT tag. In a make file, change the -value assigned to the PROJECT variable. - - - Unicode Considerations - -There are no facilities in the BCB 5 GUI to create a unicode-enabled -application. Fortunately, it is not hard to do by hand. - -1. The startup .obj system file must be changed to the unicode version. -Go to Project|Edit Option Source, and scroll down to the ALLOBJ tag. Change -c0x32.obj to c0x32w.obj. Editing this file can be quirky, but usually the -following kludge will make the change stick. Close and save the file (CTRL-F4) -then open the options dialog (CTRL-Shift-F11), then click OK on the dialog -immediately without changing anything in it. If this doesn't work, you will -have to close the project completely and edit the .bpr file by hand. - -If you are using a make file, just change the startup .obj file assigned -to the ALLOBJ variable. - -2. Add the macro define XML_UNICODE_WCHAR_T. In the GUI that goes in the -options dialog, Directories/Conditionals tab, in the Conditional define -box. In a make file, put it in the USERDEFINES variable. - -3. Of course, your code has to be written for unicode. As a start, the "main" -function is called "wmain". The tchar macros are an interesting way to -write code that can easily switch between unicode and utf-8. If -these macros are used, then simply adding the conditional define _UNICODE -as well as XML_UNICODE_WCHAR_T will bring in the unicode versions of the -tchar macros. Otherwise the utf-8 versions are used. xmlwf uses its own -hand-rolled versions of the tchar macros which are switched on and off -by the XML_UNICODE macro, which itself is set by the XML_UNICODE_WCHAR_T -define. - - Threading - -The libexpat libraries are all built with the multi-threaded dynamic RTL's. -To create single-threaded libs, do the following: - -1. The compiler option for multi-threading must be turned off. Following the -instructions above to edit the option source, remove the -tWM option from -the CFLAG1 tag. In a make file, remove it from the CFLAG1 variable. - -2. The single threaded RTL must be called. change the RTL in the ALLLIB tag or -variable (GUI or makefile repectively) to the version without the "mt" in the -name. For example, change cw32mti.lib to cw32i.lib. - - Static RTL's - -To build the libs with static RTL's do the following, - -1. For the static expatlibs, in the Tlib tab on the options dialog, uncheck the -"Use dynamic RTL" box. For the dynamic expatlibs, in the Linker tab on the options -dialog, uncheck "Use dynamic RTL". If you are using a make file, remove the _RTLDLL -assignment to the SYSDEFINES variable, and change the RTL to the version without an -"i" in the ALLLIB variable. For example, cw32mti.lib would become wc32mt.lib. + + Using a Borland compiler product + +The files in this directory support using both the free Borland +command-line compiler tools and the Borland C++ Builder IDE. The +project files have been tested with both versions 5 and 6 of the C++ +Builder product. + + Using the free BCC32 command line compiler + +After downloading and installing the free C++ Builder commandline +version, perform the following steps (assuming it was installed under +C:\Borland\BCC55): + +1) Add "C:\Borland\BCC55\BIN" to your path +2) Set the environment variable BCB to "C:\Borland\BCC55". +3) edit makefile.mak: enable or comment out the appropriate commands + under clean & distclean, depending on whether your OS can use + deltree /y or del /s/f/q. + +After that, you should simply cd to the bcb5 directory in your Expat +directory tree (same structure as CVS) and run "make all". + + Naming + +The libraries have the base name "libexpat" followed optionally by an +"s" (static) or a "w" (unicode version), then an underscore and +optionally "mt" (multi-threaded) and "d" (dynamic RTL). + +To change the name of the library a project file produces, edit the +project option source (see step 1 under Unicode below) and change +the name contained in the PROJECT tag. In a make file, change the +value assigned to the PROJECT variable. + + + Unicode Considerations + +There are no facilities in the BCB 5 GUI to create a unicode-enabled +application. Fortunately, it is not hard to do by hand. + +1. The startup .obj system file must be changed to the unicode version. +Go to Project|Edit Option Source, and scroll down to the ALLOBJ tag. Change +c0x32.obj to c0x32w.obj. Editing this file can be quirky, but usually the +following kludge will make the change stick. Close and save the file (CTRL-F4) +then open the options dialog (CTRL-Shift-F11), then click OK on the dialog +immediately without changing anything in it. If this doesn't work, you will +have to close the project completely and edit the .bpr file by hand. + +If you are using a make file, just change the startup .obj file assigned +to the ALLOBJ variable. + +2. Add the macro define XML_UNICODE_WCHAR_T. In the GUI that goes in the +options dialog, Directories/Conditionals tab, in the Conditional define +box. In a make file, put it in the USERDEFINES variable. + +3. Of course, your code has to be written for unicode. As a start, the "main" +function is called "wmain". The tchar macros are an interesting way to +write code that can easily switch between unicode and utf-8. If +these macros are used, then simply adding the conditional define _UNICODE +as well as XML_UNICODE_WCHAR_T will bring in the unicode versions of the +tchar macros. Otherwise the utf-8 versions are used. xmlwf uses its own +hand-rolled versions of the tchar macros which are switched on and off +by the XML_UNICODE macro, which itself is set by the XML_UNICODE_WCHAR_T +define. + + Threading + +The libexpat libraries are all built with the multi-threaded dynamic RTL's. +To create single-threaded libs, do the following: + +1. The compiler option for multi-threading must be turned off. Following the +instructions above to edit the option source, remove the -tWM option from +the CFLAG1 tag. In a make file, remove it from the CFLAG1 variable. + +2. The single threaded RTL must be called. change the RTL in the ALLLIB tag or +variable (GUI or makefile repectively) to the version without the "mt" in the +name. For example, change cw32mti.lib to cw32i.lib. + + Static RTL's + +To build the libs with static RTL's do the following, + +1. For the static expatlibs, in the Tlib tab on the options dialog, uncheck the +"Use dynamic RTL" box. For the dynamic expatlibs, in the Linker tab on the options +dialog, uncheck "Use dynamic RTL". If you are using a make file, remove the _RTLDLL +assignment to the SYSDEFINES variable, and change the RTL to the version without an +"i" in the ALLLIB variable. For example, cw32mti.lib would become wc32mt.lib.