From: Thomas Roessler Date: Wed, 21 Oct 1998 15:56:44 +0000 (+0000) Subject: Remove some automatically generated files from the CVS repository, X-Git-Tag: mutt-0-94-15-rel~33 X-Git-Url: https://granicus.if.org/sourcecode?a=commitdiff_plain;h=be360265a3bbe2eccc039e2006199eef8cbdba0b;p=mutt Remove some automatically generated files from the CVS repository, and add a script which generates them. --- diff --git a/INSTALL b/INSTALL index 92d4fbfc..f605eeb4 100644 --- a/INSTALL +++ b/INSTALL @@ -40,10 +40,15 @@ Installation Installing Mutt is rather painless through the use of the GNU autoconf package. Simply untar the Mutt distribution, and run the -``configure'' script. In most cases, it will automatically determine -everything it needs to know in order to compile. However, there are -a few options to ``configure'' to help it out, or change the default -behavior: +``configure'' script. If you have obtained the distribution from +the CVS repository, run the ``prepare'' script with the same command +line parameters you would pass to configure. It will set up mutt's +build environment and add the files which are present in the tar +balls, but not in the CVS repository. + +In most cases, configure will automatically determine everything it +needs to know in order to compile. However, there are a few options +to ``configure'' to help it out, or change the default behavior: --prefix=DIR install Mutt in DIR instead of /usr/local diff --git a/README b/README index 7ef63b32..5f0b5fb6 100644 --- a/README +++ b/README @@ -1,6 +1,11 @@ README for mutt-0.95 ==================== +If you got the mutt source code from the public CVS repository (CVS +root: :pserver:anonymous@ftp.guug.de:/home/roessler/cvs, password +anonymous), please read doc/devel-notes.txt to make sure that you +have a complete development environment. + Installation instructions are detailed in ``INSTALL''. The user manual is in doc/manual.txt. A list of major changes since diff --git a/aclocal.m4 b/aclocal.m4 deleted file mode 100644 index 275f5a19..00000000 --- a/aclocal.m4 +++ /dev/null @@ -1,521 +0,0 @@ -dnl aclocal.m4 generated automatically by aclocal 1.3 - -dnl Copyright (C) 1994, 1995, 1996, 1997, 1998 Free Software Foundation, Inc. -dnl This Makefile.in is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, -dnl with or without modifications, as long as this notice is preserved. - -dnl This program is distributed in the hope that it will be useful, -dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without -dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A -dnl PARTICULAR PURPOSE. - -# Like AC_CONFIG_HEADER, but automatically create stamp file. - -AC_DEFUN(AM_CONFIG_HEADER, -[AC_PREREQ([2.12]) -AC_CONFIG_HEADER([$1]) -dnl When config.status generates a header, we must update the stamp-h file. -dnl This file resides in the same directory as the config header -dnl that is generated. We must strip everything past the first ":", -dnl and everything past the last "/". -AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl -ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>, -<>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>, -<>; do - case " <<$>>CONFIG_HEADERS " in - *" <<$>>am_file "*<<)>> - echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx - ;; - esac - am_indx=`expr "<<$>>am_indx" + 1` -done<<>>dnl>>) -changequote([,]))]) - -# Do all the work for Automake. This macro actually does too much -- -# some checks are only needed if your package does certain things. -# But this isn't really a big deal. - -# serial 1 - -dnl Usage: -dnl AM_INIT_AUTOMAKE(package,version, [no-define]) - -AC_DEFUN(AM_INIT_AUTOMAKE, -[AC_REQUIRE([AM_PROG_INSTALL]) -PACKAGE=[$1] -AC_SUBST(PACKAGE) -VERSION=[$2] -AC_SUBST(VERSION) -dnl test to see if srcdir already configured -if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then - AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) -fi -ifelse([$3],, -AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE") -AC_DEFINE_UNQUOTED(VERSION, "$VERSION")) -AC_REQUIRE([AM_SANITY_CHECK]) -AC_REQUIRE([AC_ARG_PROGRAM]) -dnl FIXME This is truly gross. -missing_dir=`cd $ac_aux_dir && pwd` -AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) -AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) -AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) -AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) -AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) -AC_REQUIRE([AC_PROG_MAKE_SET])]) - - -# serial 1 - -AC_DEFUN(AM_PROG_INSTALL, -[AC_REQUIRE([AC_PROG_INSTALL]) -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' -AC_SUBST(INSTALL_SCRIPT)dnl -]) - -# -# Check to make sure that the build environment is sane. -# - -AC_DEFUN(AM_SANITY_CHECK, -[AC_MSG_CHECKING([whether build environment is sane]) -# Just in case -sleep 1 -echo timestamp > conftestfile -# Do `set' in a subshell so we don't clobber the current shell's -# arguments. Must try -L first in case configure is actually a -# symlink; some systems play weird games with the mod time of symlinks -# (eg FreeBSD returns the mod time of the symlink's containing -# directory). -if ( - set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` - if test "[$]*" = "X"; then - # -L didn't work. - set X `ls -t $srcdir/configure conftestfile` - fi - if test "[$]*" != "X $srcdir/configure conftestfile" \ - && test "[$]*" != "X conftestfile $srcdir/configure"; then - - # If neither matched, then we have a broken ls. This can happen - # if, for instance, CONFIG_SHELL is bash and it inherits a - # broken ls alias from the environment. This has actually - # happened. Such a system could not be considered "sane". - AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken -alias in your environment]) - fi - - test "[$]2" = conftestfile - ) -then - # Ok. - : -else - AC_MSG_ERROR([newly created file is older than distributed files! -Check your system clock]) -fi -rm -f conftest* -AC_MSG_RESULT(yes)]) - -dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) -dnl The program must properly implement --version. -AC_DEFUN(AM_MISSING_PROG, -[AC_MSG_CHECKING(for working $2) -# Run test in a subshell; some versions of sh will print an error if -# an executable is not found, even if stderr is redirected. -# Redirect stdin to placate older versions of autoconf. Sigh. -if ($2 --version) < /dev/null > /dev/null 2>&1; then - $1=$2 - AC_MSG_RESULT(found) -else - $1="$3/missing $2" - AC_MSG_RESULT(missing) -fi -AC_SUBST($1)]) - -# Macro to add for using GNU gettext. -# Ulrich Drepper , 1995. -# -# This file can be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU Public License -# but which still want to provide support for the GNU gettext functionality. -# Please note that the actual code is *not* freely available. - -# serial 5 - -AC_DEFUN(AM_WITH_NLS, - [AC_MSG_CHECKING([whether NLS is requested]) - dnl Default is enabled NLS - AC_ARG_ENABLE(nls, - [ --disable-nls do not use Native Language Support], - USE_NLS=$enableval, USE_NLS=yes) - AC_MSG_RESULT($USE_NLS) - AC_SUBST(USE_NLS) - - USE_INCLUDED_LIBINTL=no - - dnl If we use NLS figure out what method - if test "$USE_NLS" = "yes"; then - AC_DEFINE(ENABLE_NLS) - AC_MSG_CHECKING([whether included gettext is requested]) - AC_ARG_WITH(included-gettext, - [ --with-included-gettext use the GNU gettext library included here], - nls_cv_force_use_gnu_gettext=$withval, - nls_cv_force_use_gnu_gettext=no) - AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) - - nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" - if test "$nls_cv_force_use_gnu_gettext" != "yes"; then - dnl User does not insist on using GNU NLS library. Figure out what - dnl to use. If gettext or catgets are available (in this order) we - dnl use this. Else we have to fall back to GNU NLS library. - dnl catgets is only used if permitted by option --with-catgets. - nls_cv_header_intl= - nls_cv_header_libgt= - CATOBJEXT=NONE - - AC_CHECK_HEADER(libintl.h, - [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc, - [AC_TRY_LINK([#include ], [return (int) gettext ("")], - gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)]) - - if test "$gt_cv_func_gettext_libc" != "yes"; then - AC_CHECK_LIB(intl, bindtextdomain, - [AC_CHECK_LIB(intl, gettext, - gt_cv_func_gettext_libintl=yes, - gt_cv_func_gettext_libintl=no)]) - fi - - if test "$gt_cv_func_gettext_libintl" = "yes" ; then - LIBS="-lintl $LIBS" - fi - - if test "$gt_cv_func_gettext_libc" = "yes" \ - || test "$gt_cv_func_gettext_libintl" = "yes"; then - AC_DEFINE(HAVE_GETTEXT) - AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl - if test "$MSGFMT" != "no"; then - AC_CHECK_FUNCS(dcgettext) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) - AC_TRY_LINK(, [extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr], - [CATOBJEXT=.gmo - DATADIRNAME=share], - [CATOBJEXT=.mo - DATADIRNAME=lib]) - INSTOBJEXT=.mo - fi - fi - ]) - - if test "$CATOBJEXT" = "NONE"; then - AC_MSG_CHECKING([whether catgets can be used]) - AC_ARG_WITH(catgets, - [ --with-catgets use catgets functions if available], - nls_cv_use_catgets=$withval, nls_cv_use_catgets=no) - AC_MSG_RESULT($nls_cv_use_catgets) - - if test "$nls_cv_use_catgets" = "yes"; then - dnl No gettext in C library. Try catgets next. - AC_CHECK_LIB(i, main) - AC_CHECK_FUNC(catgets, - [AC_DEFINE(HAVE_CATGETS) - INTLOBJS="\$(CATOBJS)" - AC_PATH_PROG(GENCAT, gencat, no)dnl - if test "$GENCAT" != "no"; then - AC_PATH_PROG(GMSGFMT, gmsgfmt, no) - if test "$GMSGFMT" = "no"; then - AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no) - fi - AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) - USE_INCLUDED_LIBINTL=yes - CATOBJEXT=.cat - INSTOBJEXT=.cat - DATADIRNAME=lib - INTLDEPS='$(top_builddir)/intl/libintl.a' - INTLLIBS=$INTLDEPS - LIBS=`echo $LIBS | sed -e 's/-lintl//'` - nls_cv_header_intl=intl/libintl.h - nls_cv_header_libgt=intl/libgettext.h - fi]) - fi - fi - - if test "$CATOBJEXT" = "NONE"; then - dnl Neither gettext nor catgets in included in the C library. - dnl Fall back on GNU gettext library. - nls_cv_use_gnu_gettext=yes - fi - fi - - if test "$nls_cv_use_gnu_gettext" = "yes"; then - dnl Mark actions used to generate GNU NLS library. - INTLOBJS="\$(GETTOBJS)" - AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt) - AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) - AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, - [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :) - AC_SUBST(MSGFMT) - USE_INCLUDED_LIBINTL=yes - CATOBJEXT=.gmo - INSTOBJEXT=.mo - DATADIRNAME=share - INTLDEPS='$(top_builddir)/intl/libintl.a' - INTLLIBS=$INTLDEPS - LIBS=`echo $LIBS | sed -e 's/-lintl//'` - nls_cv_header_intl=intl/libintl.h - nls_cv_header_libgt=intl/libgettext.h - fi - - dnl Test whether we really found GNU xgettext. - if test "$XGETTEXT" != ":"; then - dnl If it is no GNU xgettext we define it as : so that the - dnl Makefiles still can work. - if $XGETTEXT --omit-header /dev/null 2> /dev/null; then - : ; - else - AC_MSG_RESULT( - [found xgettext program is not GNU xgettext; ignore it]) - XGETTEXT=":" - fi - fi - - # We need to process the po/ directory. - POSUB=po - else - DATADIRNAME=share - nls_cv_header_intl=intl/libintl.h - nls_cv_header_libgt=intl/libgettext.h - fi - AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl) - AC_OUTPUT_COMMANDS( - [case "$CONFIG_FILES" in *po/Makefile.in*) - sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile - esac]) - - - # If this is used in GNU gettext we have to set USE_NLS to `yes' - # because some of the sources are only built for this goal. - if test "$PACKAGE" = gettext; then - USE_NLS=yes - USE_INCLUDED_LIBINTL=yes - fi - - dnl These rules are solely for the distribution goal. While doing this - dnl we only have to keep exactly one list of the available catalogs - dnl in configure.in. - for lang in $ALL_LINGUAS; do - GMOFILES="$GMOFILES $lang.gmo" - POFILES="$POFILES $lang.po" - done - - dnl Make all variables we use known to autoconf. - AC_SUBST(USE_INCLUDED_LIBINTL) - AC_SUBST(CATALOGS) - AC_SUBST(CATOBJEXT) - AC_SUBST(DATADIRNAME) - AC_SUBST(GMOFILES) - AC_SUBST(INSTOBJEXT) - AC_SUBST(INTLDEPS) - AC_SUBST(INTLLIBS) - AC_SUBST(INTLOBJS) - AC_SUBST(POFILES) - AC_SUBST(POSUB) - ]) - -AC_DEFUN(AM_GNU_GETTEXT, - [AC_REQUIRE([AC_PROG_MAKE_SET])dnl - AC_REQUIRE([AC_PROG_CC])dnl - AC_REQUIRE([AC_PROG_RANLIB])dnl - AC_REQUIRE([AC_ISC_POSIX])dnl - AC_REQUIRE([AC_HEADER_STDC])dnl - AC_REQUIRE([AC_C_CONST])dnl - AC_REQUIRE([AC_C_INLINE])dnl - AC_REQUIRE([AC_TYPE_OFF_T])dnl - AC_REQUIRE([AC_TYPE_SIZE_T])dnl - AC_REQUIRE([AC_FUNC_ALLOCA])dnl - AC_REQUIRE([AC_FUNC_MMAP])dnl - - AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \ -unistd.h sys/param.h]) - AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \ -strdup __argz_count __argz_stringify __argz_next]) - - if test "${ac_cv_func_stpcpy+set}" != "set"; then - AC_CHECK_FUNCS(stpcpy) - fi - if test "${ac_cv_func_stpcpy}" = "yes"; then - AC_DEFINE(HAVE_STPCPY) - fi - - AM_LC_MESSAGES - AM_WITH_NLS - - if test "x$CATOBJEXT" != "x"; then - if test "x$ALL_LINGUAS" = "x"; then - LINGUAS= - else - AC_MSG_CHECKING(for catalogs to be installed) - NEW_LINGUAS= - for lang in ${LINGUAS=$ALL_LINGUAS}; do - case "$ALL_LINGUAS" in - *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; - esac - done - LINGUAS=$NEW_LINGUAS - AC_MSG_RESULT($LINGUAS) - fi - - dnl Construct list of names of catalog files to be constructed. - if test -n "$LINGUAS"; then - for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done - fi - fi - - dnl The reference to in the installed file - dnl must be resolved because we cannot expect the users of this - dnl to define HAVE_LOCALE_H. - if test $ac_cv_header_locale_h = yes; then - INCLUDE_LOCALE_H="#include " - else - INCLUDE_LOCALE_H="\ -/* The system does not provide the header . Take care yourself. */" - fi - AC_SUBST(INCLUDE_LOCALE_H) - - dnl Determine which catalog format we have (if any is needed) - dnl For now we know about two different formats: - dnl Linux libc-5 and the normal X/Open format - test -d intl || mkdir intl - if test "$CATOBJEXT" = ".cat"; then - AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen) - - dnl Transform the SED scripts while copying because some dumb SEDs - dnl cannot handle comments. - sed -e '/^#/d' $srcdir/intl/$msgformat-msg.sed > intl/po2msg.sed - fi - dnl po2tbl.sed is always needed. - sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \ - $srcdir/intl/po2tbl.sed.in > intl/po2tbl.sed - - dnl In the intl/Makefile.in we have a special dependency which makes - dnl only sense for gettext. We comment this out for non-gettext - dnl packages. - if test "$PACKAGE" = "gettext"; then - GT_NO="#NO#" - GT_YES= - else - GT_NO= - GT_YES="#YES#" - fi - AC_SUBST(GT_NO) - AC_SUBST(GT_YES) - - dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly - dnl find the mkinstalldirs script in another subdir but ($top_srcdir). - dnl Try to locate is. - MKINSTALLDIRS= - if test -n "$ac_aux_dir"; then - MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" - fi - if test -z "$MKINSTALLDIRS"; then - MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" - fi - AC_SUBST(MKINSTALLDIRS) - - dnl *** For now the libtool support in intl/Makefile is not for real. - l= - AC_SUBST(l) - - dnl Generate list of files to be processed by xgettext which will - dnl be included in po/Makefile. - test -d po || mkdir po - if test "x$srcdir" != "x."; then - if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then - posrcprefix="$srcdir/" - else - posrcprefix="../$srcdir/" - fi - else - posrcprefix="../" - fi - rm -f po/POTFILES - sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ - < $srcdir/po/POTFILES.in > po/POTFILES - ]) - -# Search path for a program which passes the given test. -# Ulrich Drepper , 1996. -# -# This file can be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU Public License -# but which still want to provide support for the GNU gettext functionality. -# Please note that the actual code is *not* freely available. - -# serial 1 - -dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, -dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) -AC_DEFUN(AM_PATH_PROG_WITH_TEST, -[# Extract the first word of "$2", so it can be a program name with args. -set dummy $2; ac_word=[$]2 -AC_MSG_CHECKING([for $ac_word]) -AC_CACHE_VAL(ac_cv_path_$1, -[case "[$]$1" in - /*) - ac_cv_path_$1="[$]$1" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in ifelse([$5], , $PATH, [$5]); do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if [$3]; then - ac_cv_path_$1="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" -dnl If no 4th arg is given, leave the cache variable unset, -dnl so AC_PATH_PROGS will keep looking. -ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" -])dnl - ;; -esac])dnl -$1="$ac_cv_path_$1" -if test -n "[$]$1"; then - AC_MSG_RESULT([$]$1) -else - AC_MSG_RESULT(no) -fi -AC_SUBST($1)dnl -]) - -# Check whether LC_MESSAGES is available in . -# Ulrich Drepper , 1995. -# -# This file can be copied and used freely without restrictions. It can -# be used in projects which are not available under the GNU Public License -# but which still want to provide support for the GNU gettext functionality. -# Please note that the actual code is *not* freely available. - -# serial 1 - -AC_DEFUN(AM_LC_MESSAGES, - [if test $ac_cv_header_locale_h = yes; then - AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, - [AC_TRY_LINK([#include ], [return LC_MESSAGES], - am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) - if test $am_cv_val_LC_MESSAGES = yes; then - AC_DEFINE(HAVE_LC_MESSAGES) - fi - fi]) - diff --git a/config.h.in b/config.h.in deleted file mode 100644 index ea7c037c..00000000 --- a/config.h.in +++ /dev/null @@ -1,327 +0,0 @@ -/* config.h.in. Generated automatically from configure.in by autoheader. */ -/* $Id$ */ - -/* Is this the international version? */ -#undef SUBVERSION - -/* The "real" version string */ -#undef VERSION - -/* The package name */ -#undef PACKAGE - -/* Where to put l10n data */ -#undef MUTTLOCALEDIR - -/* Enable debugging info */ -#define DEBUG - -/* Does your version of PGP support the PGPPASSFD environment variable? */ -#define HAVE_PGPPASSFD - -/* Disable the X-Mailer header? */ -#undef NO_XMAILER - -/* What is your domain name? */ -#undef DOMAIN - -/* Define if using alloca.c. */ -#undef C_ALLOCA - -/* Define to empty if the keyword does not work. */ -#undef const - -/* Define to one of _getb67, GETB67, getb67 for Cray-2 and Cray-YMP systems. - This function is required for alloca.c support on those systems. */ -#undef CRAY_STACKSEG_END - -/* Define if you have alloca, as a function or macro. */ -#undef HAVE_ALLOCA - -/* Define if you have and it should be used (not on Ultrix). */ -#undef HAVE_ALLOCA_H - -/* Define if you have a working `mmap' system call. */ -#undef HAVE_MMAP - -/* Define as __inline if that's what the C compiler calls it. */ -#undef inline - -/* Define to `long' if doesn't define. */ -#undef off_t - -/* Define to `int' if doesn't define. */ -#undef pid_t - -/* Define if you need to in order for stat and other things to work. */ -#undef _POSIX_SOURCE - -/* Define as the return type of signal handlers (int or void). */ -#undef RETSIGTYPE - -/* Define to `unsigned' if doesn't define. */ -#undef size_t - -/* If using the C implementation of alloca, define if you know the - direction of stack growth for your system; otherwise it will be - automatically deduced at run-time. - STACK_DIRECTION > 0 => grows toward higher addresses - STACK_DIRECTION < 0 => grows toward lower addresses - STACK_DIRECTION = 0 => direction of growth unknown - */ -#undef STACK_DIRECTION - -/* Define if you have the ANSI C header files. */ -#undef STDC_HEADERS - -/* Define if `sys_siglist' is declared by . */ -#undef SYS_SIGLIST_DECLARED - -/* Mutt version info */ -#undef VERSION - -/* use dotlocking to lock mailboxes? */ -#undef USE_DOTLOCK - -/* use flock() to lock mailboxes? */ -#undef USE_FLOCK - -/* Use fcntl() to lock folders? */ -#undef USE_FCNTL - -/* - * Define if you have problems with mutt not detecting new/old mailboxes - * over NFS. Some NFS implementations incorrectly cache the attributes - * of small files. - */ -#undef NFS_ATTRIBUTE_HACK - -/* Do you want support for the POP3 protocol? (--enable-pop) */ -#undef USE_POP - -/* Do you want support for the IMAP protocol? (--enable-imap) */ -#undef USE_IMAP - -/* - * Is mail spooled to the user's home directory? If defined, MAILPATH should - * be set to the filename of the spool mailbox relative the the home - * directory. - * use: configure --with-homespool=FILE - */ -#undef HOMESPOOL - -/* Where new mail is spooled */ -#undef MAILPATH - -/* Where to find sendmail on your system */ -#undef SENDMAIL - -/* Where is PGP located on your system? */ -#undef _PGPPATH - -/* Where is PGP 2.* located on your system? */ -#undef _PGPV2PATH - -/* Where is PGP 5 located on your system? */ -#undef _PGPV3PATH - -/* Where is GNU Privacy Guard located on your system? */ -#undef _PGPGPGPATH - -/* Do we have PGP 2.*? */ -#undef HAVE_PGP2 - -/* Do we have PGP 5.0 or up? */ -#undef HAVE_PGP5 - -/* Do we have GPG? */ -#undef HAVE_GPG - -/* Where to find ispell on your system? */ -#undef ISPELL - -/* Should Mutt run setgid "mail" ? */ -#undef USE_SETGID - -/* Does your curses library support color? */ -#undef HAVE_COLOR - -/* Are we using GNU rx? */ -#undef USE_GNU_RX - -/* Compiling with SLang instead of curses/ncurses? */ -#undef USE_SLANG_CURSES - -/* program to use for shell commands */ -#define EXECSHELL "/bin/sh" - -/* The "buffy_size" feature */ -#undef BUFFY_SIZE - -/* The result of isprint() is unreliable? */ -#undef LOCALES_HACK - -/* Enable exact regeneration of email addresses as parsed? NOTE: this requires - significant more memory when defined. */ -#undef EXACT_ADDRESS - -/* Does your system have the snprintf() call? */ -#undef HAVE_SNPRINTF - -/* Does your system have the vsnprintf() call? */ -#undef HAVE_VSNPRINTF - -/* Does your system have the fchdir() call? */ -#undef HAVE_FCHDIR - -/* Define if your locale.h file contains LC_MESSAGES. */ -#undef HAVE_LC_MESSAGES - -/* Define to 1 if NLS is requested. */ -#undef ENABLE_NLS - -/* Define as 1 if you have catgets and don't want to use GNU gettext. */ -#undef HAVE_CATGETS - -/* Define as 1 if you have gettext and don't want to use GNU gettext. */ -#undef HAVE_GETTEXT - -#undef HAVE_STPCPY - -/* The number of bytes in a long. */ -#undef SIZEOF_LONG - -/* Define if you have the __argz_count function. */ -#undef HAVE___ARGZ_COUNT - -/* Define if you have the __argz_next function. */ -#undef HAVE___ARGZ_NEXT - -/* Define if you have the __argz_stringify function. */ -#undef HAVE___ARGZ_STRINGIFY - -/* Define if you have the bkgdset function. */ -#undef HAVE_BKGDSET - -/* Define if you have the curs_set function. */ -#undef HAVE_CURS_SET - -/* Define if you have the dcgettext function. */ -#undef HAVE_DCGETTEXT - -/* Define if you have the fchdir function. */ -#undef HAVE_FCHDIR - -/* Define if you have the ftruncate function. */ -#undef HAVE_FTRUNCATE - -/* Define if you have the getcwd function. */ -#undef HAVE_GETCWD - -/* Define if you have the getpagesize function. */ -#undef HAVE_GETPAGESIZE - -/* Define if you have the meta function. */ -#undef HAVE_META - -/* Define if you have the munmap function. */ -#undef HAVE_MUNMAP - -/* Define if you have the putenv function. */ -#undef HAVE_PUTENV - -/* Define if you have the regcomp function. */ -#undef HAVE_REGCOMP - -/* Define if you have the resizeterm function. */ -#undef HAVE_RESIZETERM - -/* Define if you have the setegid function. */ -#undef HAVE_SETEGID - -/* Define if you have the setenv function. */ -#undef HAVE_SETENV - -/* Define if you have the setlocale function. */ -#undef HAVE_SETLOCALE - -/* Define if you have the srand48 function. */ -#undef HAVE_SRAND48 - -/* Define if you have the stpcpy function. */ -#undef HAVE_STPCPY - -/* Define if you have the strcasecmp function. */ -#undef HAVE_STRCASECMP - -/* Define if you have the strchr function. */ -#undef HAVE_STRCHR - -/* Define if you have the strdup function. */ -#undef HAVE_STRDUP - -/* Define if you have the strerror function. */ -#undef HAVE_STRERROR - -/* Define if you have the strftime function. */ -#undef HAVE_STRFTIME - -/* Define if you have the typeahead function. */ -#undef HAVE_TYPEAHEAD - -/* Define if you have the use_default_colors function. */ -#undef HAVE_USE_DEFAULT_COLORS - -/* Define if you have the header file. */ -#undef HAVE_ARGZ_H - -/* Define if you have the header file. */ -#undef HAVE_GETOPT_H - -/* Define if you have the header file. */ -#undef HAVE_LIMITS_H - -/* Define if you have the header file. */ -#undef HAVE_LOCALE_H - -/* Define if you have the header file. */ -#undef HAVE_MALLOC_H - -/* Define if you have the header file. */ -#undef HAVE_NCURSES_H - -/* Define if you have the header file. */ -#undef HAVE_NL_TYPES_H - -/* Define if you have the header file. */ -#undef HAVE_STDARG_H - -/* Define if you have the header file. */ -#undef HAVE_STRING_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_IOCTL_H - -/* Define if you have the header file. */ -#undef HAVE_SYS_PARAM_H - -/* Define if you have the header file. */ -#undef HAVE_SYSEXITS_H - -/* Define if you have the header file. */ -#undef HAVE_UNISTD_H - -/* Define if you have the i library (-li). */ -#undef HAVE_LIBI - -/* Define if you have the intl library (-lintl). */ -#undef HAVE_LIBINTL - -/* Define if you have the nsl library (-lnsl). */ -#undef HAVE_LIBNSL - -/* Define if you have the socket library (-lsocket). */ -#undef HAVE_LIBSOCKET - -/* Define if you have the x library (-lx). */ -#undef HAVE_LIBX diff --git a/prepare b/prepare new file mode 100755 index 00000000..51b96ad5 --- /dev/null +++ b/prepare @@ -0,0 +1,16 @@ +#!/bin/sh -- + +if aclocal && autoconf && autoheader && automake --foreign && ./configure $@ +then + echo + echo "The mutt source code was successfully prepared." + echo "Type make && make install to build and install mutt." + echo +else + echo + echo "Some part of the preparation process failed." + echo "Please refer to doc/building-from-cvs.txt for" + echo "details." + echo + exit 1 +fi