From: Rong Tao <rongtao@cestc.cn>
Date: Mon, 20 Jun 2022 01:34:05 +0000 (+0800)
Subject: Remove whitespace characters at the end of a line
X-Git-Tag: v12.7.1~41^2
X-Git-Url: https://granicus.if.org/sourcecode?a=commitdiff_plain;h=b104746309a0605ca0b08e6c5919c76698447984;p=sysstat

Remove whitespace characters at the end of a line
---

diff --git a/README.md b/README.md
index 051da57..390e3cf 100644
--- a/README.md
+++ b/README.md
@@ -146,7 +146,7 @@ can enter the following option to activate data collecting (either using cron or
 $ ./configure --enable-install-cron
 ```
 
-Enter `./configure --help` to display all possible options.  
+Enter `./configure --help` to display all possible options.
 Note: There is another way to configure sysstat instead of entering `./configure`:
 This is the **Interactive Configuration script** (_iconfig_) which will ask you
 for the value of the main sysstat variables and parameters.
diff --git a/configure.in b/configure.in
index c17a5eb..d677480 100644
--- a/configure.in
+++ b/configure.in
@@ -379,7 +379,7 @@ else
 fi
 AC_MSG_RESULT($SA_DIR)
 if test ! -d $SA_DIR; then
-   echo "INFO: Directory ${SA_DIR} will be created during installation stage." 
+   echo "INFO: Directory ${SA_DIR} will be created during installation stage."
 fi
 AC_SUBST(SA_DIR)
 
@@ -404,7 +404,7 @@ else
 fi
 AC_MSG_RESULT($SYSCONFIG_DIR)
 if test ! -d $SYSCONFIG_DIR; then
-   echo "INFO: Directory ${SYSCONFIG_DIR} will be created during installation stage." 
+   echo "INFO: Directory ${SYSCONFIG_DIR} will be created during installation stage."
 fi
 AC_SUBST(SYSCONFIG_DIR)
 
@@ -436,15 +436,15 @@ AC_MSG_RESULT($AUX_NLS)
 AC_CHECK_LIB(intl, gettext, LFINTL="-lintl")
 AC_SUBST(LFINTL)
 LACKING_GETTEXT="n"
-if test $AUX_NLS = "yes" &&  test x$MSGFMT != x"msgfmt"; then 
+if test $AUX_NLS = "yes" &&  test x$MSGFMT != x"msgfmt"; then
    echo "WARNING: msgfmt command not found!"
    LACKING_GETTEXT="y"
 fi
-if test $AUX_NLS = "yes" &&  test x$XGETTEXT != x"xgettext"; then 
+if test $AUX_NLS = "yes" &&  test x$XGETTEXT != x"xgettext"; then
    echo "WARNING: xgettext command not found!"
    LACKING_GETTEXT="y"
 fi
-if test $AUX_NLS = "yes" &&  test x$MSGMERGE != x"msgmerge"; then 
+if test $AUX_NLS = "yes" &&  test x$MSGMERGE != x"msgmerge"; then
    echo "WARNING: msgmerge command not found!"
    LACKING_GETTEXT="y"
 fi
@@ -475,7 +475,7 @@ AC_SUBST(LTO)
 
 # Data history to keep by sa2
 AC_MSG_CHECKING(number of daily data files to keep)
-AC_ARG_VAR([history],[number of daily data files to keep (default value is 7)]) 
+AC_ARG_VAR([history],[number of daily data files to keep (default value is 7)])
 if test x$history = x""; then
    HISTORY=7
 else
@@ -521,9 +521,9 @@ if test x$man_group = x""; then
    AC_MSG_RESULT($MAN_GROUP)
 else
    grep ^$man_group: /etc/group >/dev/null 2>&1
-   if test $? = 1; then 
+   if test $? = 1; then
       MAN_GROUP=$GRP
-      AC_MSG_RESULT($MAN_GROUP) 
+      AC_MSG_RESULT($MAN_GROUP)
       echo "WARNING: Group ${man_group} not found: Using ${GRP} instead"
    else
       MAN_GROUP=$man_group
@@ -579,14 +579,14 @@ AC_SUBST(CLEAN_SA_DIR)
 
 # Start crontab
 AC_MSG_CHECKING(whether cron should start sar automatically)
-AC_ARG_ENABLE(install-cron, 
+AC_ARG_ENABLE(install-cron,
 	      AC_HELP_STRING([--enable-install-cron],
 			     [install a crontab to start sar]),
 			     INSTALL_CRON=$enableval,INSTALL_CRON=n)
 if test $INSTALL_CRON != "yes"; then
    INSTALL_CRON=n
    AUX_CRON=no
-else 
+else
    INSTALL_CRON=y
    AUX_CRON=yes
 fi
@@ -595,7 +595,7 @@ AC_SUBST(INSTALL_CRON)
 
 # Crontab owner
 CUSR="root"
-if test $INSTALL_CRON = "y"; then 
+if test $INSTALL_CRON = "y"; then
    AC_MSG_CHECKING(crontab owner)
    AC_ARG_VAR([cron_owner],[crontab owner])
    if test x$cron_owner = x""; then
@@ -607,17 +607,17 @@ if test $INSTALL_CRON = "y"; then
          CRON_OWNER=$CUSR;
          AC_MSG_RESULT($CRON_OWNER)
          echo "WARNING: User ${cron_owner} not found: Using ${CUSR} instead."
-      else 
+      else
          CRON_OWNER=$cron_owner
          AC_MSG_RESULT($CRON_OWNER)
       fi
    fi
    echo "INFO: Crontab for ${CRON_OWNER} will be saved in current directory if necessary"
-   if test $CRON_OWNER = "root"; then 
+   if test $CRON_OWNER = "root"; then
       SU_C_OWNER=""
       QUOTE=""
       REM_CHOWN="# REM_CHOWN"
-   else 
+   else
       SU_C_OWNER="su $CRON_OWNER -c "
       QUOTE=\"
       # " (ignore this line)
@@ -653,14 +653,14 @@ if test $INSTALL_CRON = "y"; then
 
 #  Check whether sadc should collect all possible activities
    AC_MSG_CHECKING(whether sadc should collect all possible activities)
-   AC_ARG_ENABLE(collect-all, 
+   AC_ARG_ENABLE(collect-all,
 	         AC_HELP_STRING([--enable-collect-all],
 			        [collect all possible activities]),
 			        COLLECT_ALL=$enableval,COLLECT_ALL=n)
    if test $COLLECT_ALL != "yes"; then
       COLLECT_ALL=""
       AUX_COLL=no
-   else 
+   else
       COLLECT_ALL="-S XALL"
       AUX_COLL=yes
    fi
@@ -731,7 +731,7 @@ AC_SUBST(mandir)
 
 # Check whether debug mode should be activated
 AC_MSG_CHECKING(whether debug mode should be activated)
-AC_ARG_ENABLE(debuginfo, 
+AC_ARG_ENABLE(debuginfo,
 	      AC_HELP_STRING([--enable-debuginfo],
 			     [enable debug output (--debuginfo option)]),
 			     WITH_DEBUG=yes ; DFLAGS="$DFLAGS -DDEBUG" , WITH_DEBUG=no)
diff --git a/contrib/isag/isag b/contrib/isag/isag
index 30b6d1a..79ac4a4 100755
--- a/contrib/isag/isag
+++ b/contrib/isag/isag
@@ -398,7 +398,7 @@ set sag_latest_file ""
 # sar switches as names for object-instances (final and current)
 set  prog_swtch [list b B q r R S u v w W]
 
-# maximal and current values for each graph indexed by sar switch i.e. for cpu 
+# maximal and current values for each graph indexed by sar switch i.e. for cpu
 # is index u not -u
 
 foreach l $prog_swtch {
diff --git a/contrib/isag/isag.1 b/contrib/isag/isag.1
index 8d4c199..11feb44 100644
--- a/contrib/isag/isag.1
+++ b/contrib/isag/isag.1
@@ -162,16 +162,16 @@ Specify the pathname where are located the daily data files.
 Default path is: \fI/var/log/sa\fR
 .Ip "\-c config_file" 4
 .IX Item "-c config_file"
-Specify the configuration file used by the \fIisag\fR command. 
+Specify the configuration file used by the \fIisag\fR command.
 The contents of this file may depend on \fIisag\fR version number.
 Default config file is: \fI$HOME/.isag.cfg\fR.
 .Ip "\-ght gr_height" 4
 .IX Item "-ght gr_height"
-Specify the height of the chart area. 
+Specify the height of the chart area.
 Default value is: \fI400\fR.
 .Ip "\-gwd gr_width" 4
 .IX Item "-gwd gr_width"
-Specify the width of the chart area. 
+Specify the width of the chart area.
 Default value is: \fI720\fR.
 .SH "CONFIG FILE"
 .IX Header "CONFIG FILE"
diff --git a/man/sadf.in b/man/sadf.in
index 79f997a..0335311 100644
--- a/man/sadf.in
+++ b/man/sadf.in
@@ -34,7 +34,7 @@ file. This file must have been created by a version of
 uses the standard system activity daily data file.
 It is also possible to enter
 .BR "-1" ", " "-2 " "etc. as an argument to " "sadf"
-to display data of that days ago. For example, 
+to display data of that days ago. For example,
 .B -1
 will point at the standard system activity file of yesterday.
 .PP
diff --git a/man/sar.in b/man/sar.in
index d979542..eec9912 100644
--- a/man/sar.in
+++ b/man/sar.in
@@ -1591,7 +1591,7 @@ is not indicative of any kind of issue simply because of the color. It only indi
 ranges of values.
 .TP
 .B S_COLORS_SGR
-Specify the colors and other attributes used to display statistics on the terminal. 
+Specify the colors and other attributes used to display statistics on the terminal.
 Its value is a colon-separated list of capabilities that defaults to
 .BR "C=33;22:H=31;1:I=32;22:M=35;1:N=34;1:R=31;22:Z=34;22" "."
 Supported capabilities are:
diff --git a/man/tapestat.1 b/man/tapestat.1
index 7ee64b1..b7be29c 100644
--- a/man/tapestat.1
+++ b/man/tapestat.1
@@ -34,7 +34,7 @@ The
 .B tapestat
 report provides statistics for each tape drive connected to the system.
 The following data are displayed:
-.IP r/s 
+.IP r/s
 The number of reads issued expressed as the number per second averaged over the interval.
 .IP w/s
 The number of writes issued expressed as the number per second averaged over the interval.
@@ -107,7 +107,7 @@ It is possible for a percentage value (read, write, or other) to be greater than
 command will never show a percentage value more than 999).
 If rewinding a tape takes 40 seconds where the interval time is 5 seconds the %Oa value
 would show as 0 in the intervals before the rewind completed and then show as approximately
-800 percent when the rewind completes. 
+800 percent when the rewind completes.
 
 Similar values will be observed for %Rd and %Wr if a tape drive stops reading or writing
 and then restarts (that is it stopped streaming). In such a case you may see the r/s or w/s drop to zero and the %Rd/%Wr value could be higher than 100 when reading or writing continues
diff --git a/nls/README-nls b/nls/README-nls
index cbfb242..fa5e929 100644
--- a/nls/README-nls
+++ b/nls/README-nls
@@ -36,7 +36,7 @@ If you use the (Tab) C shell, you would have entered:
 Here is a complete example with iostat:
 
 $ export LANG=en_US
-$ iostat -V 
+$ iostat -V
 sysstat version 5.1.4
 (C) Sebastien Godard
 Usage: iostat [ options... ] [ <interval> [ <count> ] ]
diff --git a/nls/da.po b/nls/da.po
index 5aa2dd8..a8f2e74 100644
--- a/nls/da.po
+++ b/nls/da.po
@@ -267,7 +267,7 @@ msgstr ""
 "\t\tStatistik for afbrydelser [A_IRQ]\n"
 
 # clock ? tog fra KDE ksysguard (klok)
-# øjeblikkelig klokfrekvens / "CPU-klokfrevens lige nu:"/"CPUens 
+# øjeblikkelig klokfrekvens / "CPU-klokfrevens lige nu:"/"CPUens
 # klokfrekvens lige nu
 # spændingsinddata eller spændingsindgange.
 #: sar.c:155
diff --git a/svg_stats.c b/svg_stats.c
index 94f6662..403f084 100644
--- a/svg_stats.c
+++ b/svg_stats.c
@@ -174,7 +174,7 @@ void save_extrema(unsigned int types_nr[], void *cs, void *ps, unsigned long lon
  ***************************************************************************
  * Find the min and max values of all the graphs that will be drawn in the
  * same view. The graphs have their own min and max values in
- * spmin[pos...pos+n-1] and spmax[pos...pos+n-1]. 
+ * spmin[pos...pos+n-1] and spmax[pos...pos+n-1].
  *
  * IN:
  * @pos		Position in array for the first graph extrema value.
diff --git a/sysstat.ioconf b/sysstat.ioconf
index eefe875..0559038 100644
--- a/sysstat.ioconf
+++ b/sysstat.ioconf
@@ -66,7 +66,7 @@
 #4:0:0:NODEV
 #5:0:0:NODEV
 #6:0:0:NODEV
-7:loop:*:0:d:256:*:1:Loop Devices 
+7:loop:*:0:d:256:*:1:Loop Devices
 
 8:sd:*:0:a:16:*:16:SCSI - Controller %d
 65:8:1:
diff --git a/tapestat.h b/tapestat.h
index b611910..9e41102 100644
--- a/tapestat.h
+++ b/tapestat.h
@@ -1,7 +1,7 @@
 /*
  * tapestat: report tape statistics
  * (C) 2015 Hewlett-Packard Development Company, L.P.
- * 
+ *
  * Initial revision by Shane M. SEYMOUR (shane.seymour <at> hpe.com)
  * Modified for sysstat by Sebastien GODARD (sysstat <at> orange.fr)
  */