From: William A. Rowe Jr Date: Mon, 20 Dec 2010 23:36:12 +0000 (+0000) Subject: Text, please X-Git-Tag: 2.3.11~359 X-Git-Url: https://granicus.if.org/sourcecode?a=commitdiff_plain;h=956c10f79c5d22503a7627691b780eecbd0890f1;p=apache Text, please git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@1051318 13f79535-47bb-0310-9956-ffa450edef68 --- diff --git a/modules/cluster/NWGNUmakefile b/modules/cluster/NWGNUmakefile index 8a78d45f49..fad97bfd17 100644 --- a/modules/cluster/NWGNUmakefile +++ b/modules/cluster/NWGNUmakefile @@ -1,246 +1,246 @@ -# -# Declare the sub-directories to be built here -# - -SUBDIRS = \ - $(EOLIST) - -# -# Get the 'head' of the build environment. This includes default targets and -# paths to tools -# - -include $(AP_WORK)\build\NWGNUhead.inc - -# -# build this level's files - -# -# Make sure all needed macro's are defined -# - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/modheartbeat.nlm \ - $(OBJDIR)/modheartmonitor.nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - copy $(OBJDIR)\*.nlm $(INSTALL)\$(BASEDIR)\modules\*.* - -# -# Any specialized rules here -# - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - - +# +# Declare the sub-directories to be built here +# + +SUBDIRS = \ + $(EOLIST) + +# +# Get the 'head' of the build environment. This includes default targets and +# paths to tools +# + +include $(AP_WORK)\build\NWGNUhead.inc + +# +# build this level's files + +# +# Make sure all needed macro's are defined +# + +# +# These directories will be at the beginning of the include list, followed by +# INCDIRS +# +XINCDIRS += \ + $(EOLIST) + +# +# These flags will come after CFLAGS +# +XCFLAGS += \ + $(EOLIST) + +# +# These defines will come after DEFINES +# +XDEFINES += \ + $(EOLIST) + +# +# These flags will be added to the link.opt file +# +XLFLAGS += \ + $(EOLIST) + +# +# These values will be appended to the correct variables based on the value of +# RELEASE +# +ifeq "$(RELEASE)" "debug" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "noopt" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "release" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +# +# These are used by the link target if an NLM is being generated +# This is used by the link 'name' directive to name the nlm. If left blank +# TARGET_nlm (see below) will be used. +# +NLM_NAME = + +# +# This is used by the link '-desc ' directive. +# If left blank, NLM_NAME will be used. +# +NLM_DESCRIPTION = + +# +# This is used by the '-threadname' directive. If left blank, +# NLM_NAME Thread will be used. +# +NLM_THREAD_NAME = + +# +# If this is specified, it will override VERSION value in +# $(AP_WORK)\build\NWGNUenvironment.inc +# +NLM_VERSION = + +# +# If this is specified, it will override the default of 64K +# +NLM_STACK_SIZE = + + +# +# If this is specified it will be used by the link '-entry' directive +# +NLM_ENTRY_SYM = + +# +# If this is specified it will be used by the link '-exit' directive +# +NLM_EXIT_SYM = + +# +# If this is specified it will be used by the link '-check' directive +# +NLM_CHECK_SYM = + +# +# If these are specified it will be used by the link '-flags' directive +# +NLM_FLAGS = + +# +# If this is specified it will be linked in with the XDCData option in the def +# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled +# by setting APACHE_UNIPROC in the environment +# +XDCDATA = + +# +# If there is an NLM target, put it here +# +TARGET_nlm = \ + $(OBJDIR)/modheartbeat.nlm \ + $(OBJDIR)/modheartmonitor.nlm \ + $(EOLIST) + +# +# If there is an LIB target, put it here +# +TARGET_lib = \ + $(EOLIST) + +# +# These are the OBJ files needed to create the NLM target above. +# Paths must all use the '/' character +# +FILES_nlm_objs = \ + $(EOLIST) + +# +# These are the LIB files needed to create the NLM target above. +# These will be added as a library command in the link.opt file. +# +FILES_nlm_libs = \ + $(EOLIST) + +# +# These are the modules that the above NLM target depends on to load. +# These will be added as a module command in the link.opt file. +# +FILES_nlm_modules = \ + $(EOLIST) + +# +# If the nlm has a msg file, put it's path here +# +FILE_nlm_msg = + +# +# If the nlm has a hlp file put it's path here +# +FILE_nlm_hlp = + +# +# If this is specified, it will override $(NWOS)\copyright.txt. +# +FILE_nlm_copyright = + +# +# Any additional imports go here +# +FILES_nlm_Ximports = \ + $(EOLIST) + +# +# Any symbols exported to here +# +FILES_nlm_exports = \ + $(EOLIST) + +# +# These are the OBJ files needed to create the LIB target above. +# Paths must all use the '/' character +# +FILES_lib_objs = \ + $(EOLIST) + +# +# implement targets and dependancies (leave this section alone) +# + +libs :: $(OBJDIR) $(TARGET_lib) + +nlms :: libs $(TARGET_nlm) + +# +# Updated this target to create necessary directories and copy files to the +# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) +# +install :: nlms FORCE + copy $(OBJDIR)\*.nlm $(INSTALL)\$(BASEDIR)\modules\*.* + +# +# Any specialized rules here +# + +# +# Include the 'tail' makefile that has targets that depend on variables defined +# in this makefile +# + +include $(AP_WORK)\build\NWGNUtail.inc + + diff --git a/modules/cluster/NWGNUmodheartbeat b/modules/cluster/NWGNUmodheartbeat index ba208472b0..e25f95b65f 100644 --- a/modules/cluster/NWGNUmodheartbeat +++ b/modules/cluster/NWGNUmodheartbeat @@ -1,257 +1,257 @@ -# -# Declare the sub-directories to be built here -# - -SUBDIRS = \ - $(EOLIST) - -# -# Get the 'head' of the build environment. This includes default targets and -# paths to tools -# - -include $(AP_WORK)\build\NWGNUhead.inc - -# -# build this level's files - -# -# Make sure all needed macro's are defined -# - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(APR)/include \ - $(APRUTIL)/include \ - $(AP_WORK)/include \ - $(AP_WORK)/modules/core \ - $(NWOS) \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = modheartbeat - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) Heart Beat Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = modheartbeat - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/modheartbeat.nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_heartbeat.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @libc.imp \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - heartbeat_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - -# -# Any specialized rules here -# - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - - +# +# Declare the sub-directories to be built here +# + +SUBDIRS = \ + $(EOLIST) + +# +# Get the 'head' of the build environment. This includes default targets and +# paths to tools +# + +include $(AP_WORK)\build\NWGNUhead.inc + +# +# build this level's files + +# +# Make sure all needed macro's are defined +# + +# +# These directories will be at the beginning of the include list, followed by +# INCDIRS +# +XINCDIRS += \ + $(APR)/include \ + $(APRUTIL)/include \ + $(AP_WORK)/include \ + $(AP_WORK)/modules/core \ + $(NWOS) \ + $(EOLIST) + +# +# These flags will come after CFLAGS +# +XCFLAGS += \ + $(EOLIST) + +# +# These defines will come after DEFINES +# +XDEFINES += \ + $(EOLIST) + +# +# These flags will be added to the link.opt file +# +XLFLAGS += \ + $(EOLIST) + +# +# These values will be appended to the correct variables based on the value of +# RELEASE +# +ifeq "$(RELEASE)" "debug" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "noopt" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "release" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +# +# These are used by the link target if an NLM is being generated +# This is used by the link 'name' directive to name the nlm. If left blank +# TARGET_nlm (see below) will be used. +# +NLM_NAME = modheartbeat + +# +# This is used by the link '-desc ' directive. +# If left blank, NLM_NAME will be used. +# +NLM_DESCRIPTION = Apache $(VERSION_STR) Heart Beat Module + +# +# This is used by the '-threadname' directive. If left blank, +# NLM_NAME Thread will be used. +# +NLM_THREAD_NAME = modheartbeat + +# +# If this is specified, it will override VERSION value in +# $(AP_WORK)\build\NWGNUenvironment.inc +# +NLM_VERSION = + +# +# If this is specified, it will override the default of 64K +# +NLM_STACK_SIZE = 8192 + + +# +# If this is specified it will be used by the link '-entry' directive +# +NLM_ENTRY_SYM = _LibCPrelude + +# +# If this is specified it will be used by the link '-exit' directive +# +NLM_EXIT_SYM = _LibCPostlude + +# +# If this is specified it will be used by the link '-check' directive +# +NLM_CHECK_SYM = + +# +# If these are specified it will be used by the link '-flags' directive +# +NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION + +# +# If this is specified it will be linked in with the XDCData option in the def +# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled +# by setting APACHE_UNIPROC in the environment +# +XDCDATA = + +# +# If there is an NLM target, put it here +# +TARGET_nlm = \ + $(OBJDIR)/modheartbeat.nlm \ + $(EOLIST) + +# +# If there is an LIB target, put it here +# +TARGET_lib = \ + $(EOLIST) + +# +# These are the OBJ files needed to create the NLM target above. +# Paths must all use the '/' character +# +FILES_nlm_objs = \ + $(OBJDIR)/mod_heartbeat.o \ + $(EOLIST) + +# +# These are the LIB files needed to create the NLM target above. +# These will be added as a library command in the link.opt file. +# +FILES_nlm_libs = \ + libcpre.o \ + $(EOLIST) + +# +# These are the modules that the above NLM target depends on to load. +# These will be added as a module command in the link.opt file. +# +FILES_nlm_modules = \ + aprlib \ + libc \ + $(EOLIST) + +# +# If the nlm has a msg file, put it's path here +# +FILE_nlm_msg = + +# +# If the nlm has a hlp file put it's path here +# +FILE_nlm_hlp = + +# +# If this is specified, it will override $(NWOS)\copyright.txt. +# +FILE_nlm_copyright = + +# +# Any additional imports go here +# +FILES_nlm_Ximports = \ + @$(APR)/aprlib.imp \ + @$(NWOS)/httpd.imp \ + @libc.imp \ + $(EOLIST) + +# +# Any symbols exported to here +# +FILES_nlm_exports = \ + heartbeat_module \ + $(EOLIST) + +# +# These are the OBJ files needed to create the LIB target above. +# Paths must all use the '/' character +# +FILES_lib_objs = \ + $(EOLIST) + +# +# implement targets and dependancies (leave this section alone) +# + +libs :: $(OBJDIR) $(TARGET_lib) + +nlms :: libs $(TARGET_nlm) + +# +# Updated this target to create necessary directories and copy files to the +# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) +# +install :: nlms FORCE + +# +# Any specialized rules here +# + +# +# Include the 'tail' makefile that has targets that depend on variables defined +# in this makefile +# + +include $(AP_WORK)\build\NWGNUtail.inc + + diff --git a/modules/cluster/NWGNUmodheartmonitor b/modules/cluster/NWGNUmodheartmonitor index bdb96755c5..c298fc7aea 100644 --- a/modules/cluster/NWGNUmodheartmonitor +++ b/modules/cluster/NWGNUmodheartmonitor @@ -1,257 +1,257 @@ -# -# Declare the sub-directories to be built here -# - -SUBDIRS = \ - $(EOLIST) - -# -# Get the 'head' of the build environment. This includes default targets and -# paths to tools -# - -include $(AP_WORK)\build\NWGNUhead.inc - -# -# build this level's files - -# -# Make sure all needed macro's are defined -# - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(APR)/include \ - $(APRUTIL)/include \ - $(AP_WORK)/include \ - $(AP_WORK)/modules/core \ - $(NWOS) \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = modheartmonitor - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) Heart Beat Monitor Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = modheartmonitor - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/modheartmonitor.nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_heartmonitor.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @libc.imp \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - heartmonitor_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - -# -# Any specialized rules here -# - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - - +# +# Declare the sub-directories to be built here +# + +SUBDIRS = \ + $(EOLIST) + +# +# Get the 'head' of the build environment. This includes default targets and +# paths to tools +# + +include $(AP_WORK)\build\NWGNUhead.inc + +# +# build this level's files + +# +# Make sure all needed macro's are defined +# + +# +# These directories will be at the beginning of the include list, followed by +# INCDIRS +# +XINCDIRS += \ + $(APR)/include \ + $(APRUTIL)/include \ + $(AP_WORK)/include \ + $(AP_WORK)/modules/core \ + $(NWOS) \ + $(EOLIST) + +# +# These flags will come after CFLAGS +# +XCFLAGS += \ + $(EOLIST) + +# +# These defines will come after DEFINES +# +XDEFINES += \ + $(EOLIST) + +# +# These flags will be added to the link.opt file +# +XLFLAGS += \ + $(EOLIST) + +# +# These values will be appended to the correct variables based on the value of +# RELEASE +# +ifeq "$(RELEASE)" "debug" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "noopt" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "release" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +# +# These are used by the link target if an NLM is being generated +# This is used by the link 'name' directive to name the nlm. If left blank +# TARGET_nlm (see below) will be used. +# +NLM_NAME = modheartmonitor + +# +# This is used by the link '-desc ' directive. +# If left blank, NLM_NAME will be used. +# +NLM_DESCRIPTION = Apache $(VERSION_STR) Heart Beat Monitor Module + +# +# This is used by the '-threadname' directive. If left blank, +# NLM_NAME Thread will be used. +# +NLM_THREAD_NAME = modheartmonitor + +# +# If this is specified, it will override VERSION value in +# $(AP_WORK)\build\NWGNUenvironment.inc +# +NLM_VERSION = + +# +# If this is specified, it will override the default of 64K +# +NLM_STACK_SIZE = 8192 + + +# +# If this is specified it will be used by the link '-entry' directive +# +NLM_ENTRY_SYM = _LibCPrelude + +# +# If this is specified it will be used by the link '-exit' directive +# +NLM_EXIT_SYM = _LibCPostlude + +# +# If this is specified it will be used by the link '-check' directive +# +NLM_CHECK_SYM = + +# +# If these are specified it will be used by the link '-flags' directive +# +NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION + +# +# If this is specified it will be linked in with the XDCData option in the def +# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled +# by setting APACHE_UNIPROC in the environment +# +XDCDATA = + +# +# If there is an NLM target, put it here +# +TARGET_nlm = \ + $(OBJDIR)/modheartmonitor.nlm \ + $(EOLIST) + +# +# If there is an LIB target, put it here +# +TARGET_lib = \ + $(EOLIST) + +# +# These are the OBJ files needed to create the NLM target above. +# Paths must all use the '/' character +# +FILES_nlm_objs = \ + $(OBJDIR)/mod_heartmonitor.o \ + $(EOLIST) + +# +# These are the LIB files needed to create the NLM target above. +# These will be added as a library command in the link.opt file. +# +FILES_nlm_libs = \ + libcpre.o \ + $(EOLIST) + +# +# These are the modules that the above NLM target depends on to load. +# These will be added as a module command in the link.opt file. +# +FILES_nlm_modules = \ + aprlib \ + libc \ + $(EOLIST) + +# +# If the nlm has a msg file, put it's path here +# +FILE_nlm_msg = + +# +# If the nlm has a hlp file put it's path here +# +FILE_nlm_hlp = + +# +# If this is specified, it will override $(NWOS)\copyright.txt. +# +FILE_nlm_copyright = + +# +# Any additional imports go here +# +FILES_nlm_Ximports = \ + @$(APR)/aprlib.imp \ + @$(NWOS)/httpd.imp \ + @libc.imp \ + $(EOLIST) + +# +# Any symbols exported to here +# +FILES_nlm_exports = \ + heartmonitor_module \ + $(EOLIST) + +# +# These are the OBJ files needed to create the LIB target above. +# Paths must all use the '/' character +# +FILES_lib_objs = \ + $(EOLIST) + +# +# implement targets and dependancies (leave this section alone) +# + +libs :: $(OBJDIR) $(TARGET_lib) + +nlms :: libs $(TARGET_nlm) + +# +# Updated this target to create necessary directories and copy files to the +# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) +# +install :: nlms FORCE + +# +# Any specialized rules here +# + +# +# Include the 'tail' makefile that has targets that depend on variables defined +# in this makefile +# + +include $(AP_WORK)\build\NWGNUtail.inc + + diff --git a/modules/experimental/NWGNUnoloris b/modules/experimental/NWGNUnoloris index e25a89c9c7..461576fca4 100644 --- a/modules/experimental/NWGNUnoloris +++ b/modules/experimental/NWGNUnoloris @@ -1,256 +1,256 @@ -# -# Declare the sub-directories to be built here -# - -SUBDIRS = \ - $(EOLIST) - -# -# Get the 'head' of the build environment. This includes default targets and -# paths to tools -# - -include $(AP_WORK)\build\NWGNUhead.inc - -# -# build this level's files - -# -# Make sure all needed macro's are defined -# - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(APR)/include \ - $(APRUTIL)/include \ - $(AP_WORK)/include \ - $(NWOS) \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = noloris - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) No-Slowloris Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = $(NLM_NAME) Module - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/$(NLM_NAME).nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_noloris.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @libc.imp \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - noloris_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - -# -# Any specialized rules here -# - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - - +# +# Declare the sub-directories to be built here +# + +SUBDIRS = \ + $(EOLIST) + +# +# Get the 'head' of the build environment. This includes default targets and +# paths to tools +# + +include $(AP_WORK)\build\NWGNUhead.inc + +# +# build this level's files + +# +# Make sure all needed macro's are defined +# + +# +# These directories will be at the beginning of the include list, followed by +# INCDIRS +# +XINCDIRS += \ + $(APR)/include \ + $(APRUTIL)/include \ + $(AP_WORK)/include \ + $(NWOS) \ + $(EOLIST) + +# +# These flags will come after CFLAGS +# +XCFLAGS += \ + $(EOLIST) + +# +# These defines will come after DEFINES +# +XDEFINES += \ + $(EOLIST) + +# +# These flags will be added to the link.opt file +# +XLFLAGS += \ + $(EOLIST) + +# +# These values will be appended to the correct variables based on the value of +# RELEASE +# +ifeq "$(RELEASE)" "debug" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "noopt" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "release" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +# +# These are used by the link target if an NLM is being generated +# This is used by the link 'name' directive to name the nlm. If left blank +# TARGET_nlm (see below) will be used. +# +NLM_NAME = noloris + +# +# This is used by the link '-desc ' directive. +# If left blank, NLM_NAME will be used. +# +NLM_DESCRIPTION = Apache $(VERSION_STR) No-Slowloris Module + +# +# This is used by the '-threadname' directive. If left blank, +# NLM_NAME Thread will be used. +# +NLM_THREAD_NAME = $(NLM_NAME) Module + +# +# If this is specified, it will override VERSION value in +# $(AP_WORK)\build\NWGNUenvironment.inc +# +NLM_VERSION = + +# +# If this is specified, it will override the default of 64K +# +NLM_STACK_SIZE = 8192 + + +# +# If this is specified it will be used by the link '-entry' directive +# +NLM_ENTRY_SYM = _LibCPrelude + +# +# If this is specified it will be used by the link '-exit' directive +# +NLM_EXIT_SYM = _LibCPostlude + +# +# If this is specified it will be used by the link '-check' directive +# +NLM_CHECK_SYM = + +# +# If these are specified it will be used by the link '-flags' directive +# +NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION + +# +# If this is specified it will be linked in with the XDCData option in the def +# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled +# by setting APACHE_UNIPROC in the environment +# +XDCDATA = + +# +# If there is an NLM target, put it here +# +TARGET_nlm = \ + $(OBJDIR)/$(NLM_NAME).nlm \ + $(EOLIST) + +# +# If there is an LIB target, put it here +# +TARGET_lib = \ + $(EOLIST) + +# +# These are the OBJ files needed to create the NLM target above. +# Paths must all use the '/' character +# +FILES_nlm_objs = \ + $(OBJDIR)/mod_noloris.o \ + $(EOLIST) + +# +# These are the LIB files needed to create the NLM target above. +# These will be added as a library command in the link.opt file. +# +FILES_nlm_libs = \ + libcpre.o \ + $(EOLIST) + +# +# These are the modules that the above NLM target depends on to load. +# These will be added as a module command in the link.opt file. +# +FILES_nlm_modules = \ + aprlib \ + libc \ + $(EOLIST) + +# +# If the nlm has a msg file, put it's path here +# +FILE_nlm_msg = + +# +# If the nlm has a hlp file put it's path here +# +FILE_nlm_hlp = + +# +# If this is specified, it will override $(NWOS)\copyright.txt. +# +FILE_nlm_copyright = + +# +# Any additional imports go here +# +FILES_nlm_Ximports = \ + @$(APR)/aprlib.imp \ + @$(NWOS)/httpd.imp \ + @libc.imp \ + $(EOLIST) + +# +# Any symbols exported to here +# +FILES_nlm_exports = \ + noloris_module \ + $(EOLIST) + +# +# These are the OBJ files needed to create the LIB target above. +# Paths must all use the '/' character +# +FILES_lib_objs = \ + $(EOLIST) + +# +# implement targets and dependancies (leave this section alone) +# + +libs :: $(OBJDIR) $(TARGET_lib) + +nlms :: libs $(TARGET_nlm) + +# +# Updated this target to create necessary directories and copy files to the +# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) +# +install :: nlms FORCE + +# +# Any specialized rules here +# + +# +# Include the 'tail' makefile that has targets that depend on variables defined +# in this makefile +# + +include $(AP_WORK)\build\NWGNUtail.inc + + diff --git a/modules/filters/NWGNUreflector b/modules/filters/NWGNUreflector index 81a59ebf47..1c17e9f090 100644 --- a/modules/filters/NWGNUreflector +++ b/modules/filters/NWGNUreflector @@ -1,256 +1,256 @@ -# -# Declare the sub-directories to be built here -# - -SUBDIRS = \ - $(EOLIST) - -# -# Get the 'head' of the build environment. This includes default targets and -# paths to tools -# - -include $(AP_WORK)\build\NWGNUhead.inc - -# -# build this level's files - -# -# Make sure all needed macro's are defined -# - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(APR)/include \ - $(APRUTIL)/include \ - $(AP_WORK)/include \ - $(NWOS) \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = reflector - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) Reflector Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = reflector - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/reflector.nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_reflector.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @libc.imp \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - reflector_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - -# -# Any specialized rules here -# - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - - +# +# Declare the sub-directories to be built here +# + +SUBDIRS = \ + $(EOLIST) + +# +# Get the 'head' of the build environment. This includes default targets and +# paths to tools +# + +include $(AP_WORK)\build\NWGNUhead.inc + +# +# build this level's files + +# +# Make sure all needed macro's are defined +# + +# +# These directories will be at the beginning of the include list, followed by +# INCDIRS +# +XINCDIRS += \ + $(APR)/include \ + $(APRUTIL)/include \ + $(AP_WORK)/include \ + $(NWOS) \ + $(EOLIST) + +# +# These flags will come after CFLAGS +# +XCFLAGS += \ + $(EOLIST) + +# +# These defines will come after DEFINES +# +XDEFINES += \ + $(EOLIST) + +# +# These flags will be added to the link.opt file +# +XLFLAGS += \ + $(EOLIST) + +# +# These values will be appended to the correct variables based on the value of +# RELEASE +# +ifeq "$(RELEASE)" "debug" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "noopt" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "release" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +# +# These are used by the link target if an NLM is being generated +# This is used by the link 'name' directive to name the nlm. If left blank +# TARGET_nlm (see below) will be used. +# +NLM_NAME = reflector + +# +# This is used by the link '-desc ' directive. +# If left blank, NLM_NAME will be used. +# +NLM_DESCRIPTION = Apache $(VERSION_STR) Reflector Module + +# +# This is used by the '-threadname' directive. If left blank, +# NLM_NAME Thread will be used. +# +NLM_THREAD_NAME = reflector + +# +# If this is specified, it will override VERSION value in +# $(AP_WORK)\build\NWGNUenvironment.inc +# +NLM_VERSION = + +# +# If this is specified, it will override the default of 64K +# +NLM_STACK_SIZE = 8192 + + +# +# If this is specified it will be used by the link '-entry' directive +# +NLM_ENTRY_SYM = _LibCPrelude + +# +# If this is specified it will be used by the link '-exit' directive +# +NLM_EXIT_SYM = _LibCPostlude + +# +# If this is specified it will be used by the link '-check' directive +# +NLM_CHECK_SYM = + +# +# If these are specified it will be used by the link '-flags' directive +# +NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION + +# +# If this is specified it will be linked in with the XDCData option in the def +# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled +# by setting APACHE_UNIPROC in the environment +# +XDCDATA = + +# +# If there is an NLM target, put it here +# +TARGET_nlm = \ + $(OBJDIR)/reflector.nlm \ + $(EOLIST) + +# +# If there is an LIB target, put it here +# +TARGET_lib = \ + $(EOLIST) + +# +# These are the OBJ files needed to create the NLM target above. +# Paths must all use the '/' character +# +FILES_nlm_objs = \ + $(OBJDIR)/mod_reflector.o \ + $(EOLIST) + +# +# These are the LIB files needed to create the NLM target above. +# These will be added as a library command in the link.opt file. +# +FILES_nlm_libs = \ + libcpre.o \ + $(EOLIST) + +# +# These are the modules that the above NLM target depends on to load. +# These will be added as a module command in the link.opt file. +# +FILES_nlm_modules = \ + aprlib \ + libc \ + $(EOLIST) + +# +# If the nlm has a msg file, put it's path here +# +FILE_nlm_msg = + +# +# If the nlm has a hlp file put it's path here +# +FILE_nlm_hlp = + +# +# If this is specified, it will override $(NWOS)\copyright.txt. +# +FILE_nlm_copyright = + +# +# Any additional imports go here +# +FILES_nlm_Ximports = \ + @$(APR)/aprlib.imp \ + @$(NWOS)/httpd.imp \ + @libc.imp \ + $(EOLIST) + +# +# Any symbols exported to here +# +FILES_nlm_exports = \ + reflector_module \ + $(EOLIST) + +# +# These are the OBJ files needed to create the LIB target above. +# Paths must all use the '/' character +# +FILES_lib_objs = \ + $(EOLIST) + +# +# implement targets and dependancies (leave this section alone) +# + +libs :: $(OBJDIR) $(TARGET_lib) + +nlms :: libs $(TARGET_nlm) + +# +# Updated this target to create necessary directories and copy files to the +# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) +# +install :: nlms FORCE + +# +# Any specialized rules here +# + +# +# Include the 'tail' makefile that has targets that depend on variables defined +# in this makefile +# + +include $(AP_WORK)\build\NWGNUtail.inc + + diff --git a/modules/lua/NWGNUmakefile b/modules/lua/NWGNUmakefile index d1adaa8668..0b9a3094c5 100644 --- a/modules/lua/NWGNUmakefile +++ b/modules/lua/NWGNUmakefile @@ -1,272 +1,272 @@ -# -# Declare the sub-directories to be built here -# - -SUBDIRS = \ - $(EOLIST) - -# -# Get the 'head' of the build environment. This includes default targets and -# paths to tools -# - -include $(AP_WORK)\build\NWGNUhead.inc - -# -# build this level's files - -# -# Make sure all needed macro's are defined -# - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(APR)/include \ - $(APRUTIL)/include \ - $(AP_WORK)/include \ - $(AP_WORK)/modules/http \ - $(NWOS) \ - $(LUASRC)/src \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - -opt nointrinsics \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - -L$(OBJDIR) \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = mod_lua - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) LUA Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = LUA Module - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/$(NLM_NAME).nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(OBJDIR)/lua.lib \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_lua.o \ - $(OBJDIR)/lua_apr.o \ - $(OBJDIR)/lua_config.o \ - $(OBJDIR)/lua_request.o \ - $(OBJDIR)/lua_vmprep.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(OBJDIR)/lua.lib \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @libc.imp \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - lua_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -UNWANTED = $(LUASRC)/src/lua.c $(LUASRC)/src/luac.c $(LUASRC)/src/print.c - -FILES_lib_objs = \ - $(patsubst $(LUASRC)/src/%.c,$(OBJDIR)/%.o, $(filter-out $(UNWANTED), $(wildcard $(LUASRC)/src/*.c))) \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - copy $(OBJDIR)\*.nlm $(INSTALL)\$(BASEDIR)\modules\*.* - -# -# Any specialized rules here -# - -vpath %.c $(LUASRC)/src - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - - +# +# Declare the sub-directories to be built here +# + +SUBDIRS = \ + $(EOLIST) + +# +# Get the 'head' of the build environment. This includes default targets and +# paths to tools +# + +include $(AP_WORK)\build\NWGNUhead.inc + +# +# build this level's files + +# +# Make sure all needed macro's are defined +# + +# +# These directories will be at the beginning of the include list, followed by +# INCDIRS +# +XINCDIRS += \ + $(APR)/include \ + $(APRUTIL)/include \ + $(AP_WORK)/include \ + $(AP_WORK)/modules/http \ + $(NWOS) \ + $(LUASRC)/src \ + $(EOLIST) + +# +# These flags will come after CFLAGS +# +XCFLAGS += \ + -opt nointrinsics \ + $(EOLIST) + +# +# These defines will come after DEFINES +# +XDEFINES += \ + $(EOLIST) + +# +# These flags will be added to the link.opt file +# +XLFLAGS += \ + -L$(OBJDIR) \ + $(EOLIST) + +# +# These values will be appended to the correct variables based on the value of +# RELEASE +# +ifeq "$(RELEASE)" "debug" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "noopt" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "release" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +# +# These are used by the link target if an NLM is being generated +# This is used by the link 'name' directive to name the nlm. If left blank +# TARGET_nlm (see below) will be used. +# +NLM_NAME = mod_lua + +# +# This is used by the link '-desc ' directive. +# If left blank, NLM_NAME will be used. +# +NLM_DESCRIPTION = Apache $(VERSION_STR) LUA Module + +# +# This is used by the '-threadname' directive. If left blank, +# NLM_NAME Thread will be used. +# +NLM_THREAD_NAME = LUA Module + +# +# If this is specified, it will override VERSION value in +# $(AP_WORK)\build\NWGNUenvironment.inc +# +NLM_VERSION = + +# +# If this is specified, it will override the default of 64K +# +NLM_STACK_SIZE = 8192 + + +# +# If this is specified it will be used by the link '-entry' directive +# +NLM_ENTRY_SYM = _LibCPrelude + +# +# If this is specified it will be used by the link '-exit' directive +# +NLM_EXIT_SYM = _LibCPostlude + +# +# If this is specified it will be used by the link '-check' directive +# +NLM_CHECK_SYM = + +# +# If these are specified it will be used by the link '-flags' directive +# +NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION + +# +# If this is specified it will be linked in with the XDCData option in the def +# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled +# by setting APACHE_UNIPROC in the environment +# +XDCDATA = + +# +# If there is an NLM target, put it here +# +TARGET_nlm = \ + $(OBJDIR)/$(NLM_NAME).nlm \ + $(EOLIST) + +# +# If there is an LIB target, put it here +# +TARGET_lib = \ + $(OBJDIR)/lua.lib \ + $(EOLIST) + +# +# These are the OBJ files needed to create the NLM target above. +# Paths must all use the '/' character +# +FILES_nlm_objs = \ + $(OBJDIR)/mod_lua.o \ + $(OBJDIR)/lua_apr.o \ + $(OBJDIR)/lua_config.o \ + $(OBJDIR)/lua_request.o \ + $(OBJDIR)/lua_vmprep.o \ + $(EOLIST) + +# +# These are the LIB files needed to create the NLM target above. +# These will be added as a library command in the link.opt file. +# +FILES_nlm_libs = \ + libcpre.o \ + $(OBJDIR)/lua.lib \ + $(EOLIST) + +# +# These are the modules that the above NLM target depends on to load. +# These will be added as a module command in the link.opt file. +# +FILES_nlm_modules = \ + aprlib \ + libc \ + $(EOLIST) + +# +# If the nlm has a msg file, put it's path here +# +FILE_nlm_msg = + +# +# If the nlm has a hlp file put it's path here +# +FILE_nlm_hlp = + +# +# If this is specified, it will override $(NWOS)\copyright.txt. +# +FILE_nlm_copyright = + +# +# Any additional imports go here +# +FILES_nlm_Ximports = \ + @$(APR)/aprlib.imp \ + @$(NWOS)/httpd.imp \ + @libc.imp \ + $(EOLIST) + +# +# Any symbols exported to here +# +FILES_nlm_exports = \ + lua_module \ + $(EOLIST) + +# +# These are the OBJ files needed to create the LIB target above. +# Paths must all use the '/' character +# +UNWANTED = $(LUASRC)/src/lua.c $(LUASRC)/src/luac.c $(LUASRC)/src/print.c + +FILES_lib_objs = \ + $(patsubst $(LUASRC)/src/%.c,$(OBJDIR)/%.o, $(filter-out $(UNWANTED), $(wildcard $(LUASRC)/src/*.c))) \ + $(EOLIST) + +# +# implement targets and dependancies (leave this section alone) +# + +libs :: $(OBJDIR) $(TARGET_lib) + +nlms :: libs $(TARGET_nlm) + +# +# Updated this target to create necessary directories and copy files to the +# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) +# +install :: nlms FORCE + copy $(OBJDIR)\*.nlm $(INSTALL)\$(BASEDIR)\modules\*.* + +# +# Any specialized rules here +# + +vpath %.c $(LUASRC)/src + +# +# Include the 'tail' makefile that has targets that depend on variables defined +# in this makefile +# + +include $(AP_WORK)\build\NWGNUtail.inc + + diff --git a/modules/proxy/NWGNUproxyfcgi b/modules/proxy/NWGNUproxyfcgi index acb9a36498..c35d8c0e5f 100644 --- a/modules/proxy/NWGNUproxyfcgi +++ b/modules/proxy/NWGNUproxyfcgi @@ -1,262 +1,262 @@ -# -# Make sure all needed macro's are defined -# - -# -# Get the 'head' of the build environment if necessary. This includes default -# targets and paths to tools -# - -ifndef EnvironmentDefined -include $(AP_WORK)\build\NWGNUhead.inc -endif - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(APR)/include \ - $(APRUTIL)/include \ - $(AP_WORK)/include \ - $(AP_WORK)/modules/http \ - $(NWOS) \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - -relax_pointers \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = proxyfcgi - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) Proxy Fast CGI Sub-Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = Proxy FCGI Module - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/proxyfcgi.nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_proxy_fcgi.o \ - $(OBJDIR)/proxy_util.o \ - $(OBJDIR)/libprews.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - proxy \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @$(OBJDIR)/mod_proxy.imp \ - @libc.imp \ - $(EOLIST) - -# Don't link with Winsock if standard sockets are being used -ifndef USE_STDSOCKETS -FILES_nlm_Ximports += @ws2nlm.imp \ - $(EOLIST) -endif - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - proxy_fcgi_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - -# -# Any specialized rules here -# - -vpath %.c ../arch/netware - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - - +# +# Make sure all needed macro's are defined +# + +# +# Get the 'head' of the build environment if necessary. This includes default +# targets and paths to tools +# + +ifndef EnvironmentDefined +include $(AP_WORK)\build\NWGNUhead.inc +endif + +# +# These directories will be at the beginning of the include list, followed by +# INCDIRS +# +XINCDIRS += \ + $(APR)/include \ + $(APRUTIL)/include \ + $(AP_WORK)/include \ + $(AP_WORK)/modules/http \ + $(NWOS) \ + $(EOLIST) + +# +# These flags will come after CFLAGS +# +XCFLAGS += \ + -relax_pointers \ + $(EOLIST) + +# +# These defines will come after DEFINES +# +XDEFINES += \ + $(EOLIST) + +# +# These flags will be added to the link.opt file +# +XLFLAGS += \ + $(EOLIST) + +# +# These values will be appended to the correct variables based on the value of +# RELEASE +# +ifeq "$(RELEASE)" "debug" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "noopt" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "release" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +# +# These are used by the link target if an NLM is being generated +# This is used by the link 'name' directive to name the nlm. If left blank +# TARGET_nlm (see below) will be used. +# +NLM_NAME = proxyfcgi + +# +# This is used by the link '-desc ' directive. +# If left blank, NLM_NAME will be used. +# +NLM_DESCRIPTION = Apache $(VERSION_STR) Proxy Fast CGI Sub-Module + +# +# This is used by the '-threadname' directive. If left blank, +# NLM_NAME Thread will be used. +# +NLM_THREAD_NAME = Proxy FCGI Module + +# +# If this is specified, it will override VERSION value in +# $(AP_WORK)\build\NWGNUenvironment.inc +# +NLM_VERSION = + +# +# If this is specified, it will override the default of 64K +# +NLM_STACK_SIZE = 8192 + + +# +# If this is specified it will be used by the link '-entry' directive +# +NLM_ENTRY_SYM = _LibCPrelude + +# +# If this is specified it will be used by the link '-exit' directive +# +NLM_EXIT_SYM = _LibCPostlude + +# +# If this is specified it will be used by the link '-check' directive +# +NLM_CHECK_SYM = + +# +# If these are specified it will be used by the link '-flags' directive +# +NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION + +# +# If this is specified it will be linked in with the XDCData option in the def +# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled +# by setting APACHE_UNIPROC in the environment +# +XDCDATA = + +# +# If there is an NLM target, put it here +# +TARGET_nlm = \ + $(OBJDIR)/proxyfcgi.nlm \ + $(EOLIST) + +# +# If there is an LIB target, put it here +# +TARGET_lib = \ + $(EOLIST) + +# +# These are the OBJ files needed to create the NLM target above. +# Paths must all use the '/' character +# +FILES_nlm_objs = \ + $(OBJDIR)/mod_proxy_fcgi.o \ + $(OBJDIR)/proxy_util.o \ + $(OBJDIR)/libprews.o \ + $(EOLIST) + +# +# These are the LIB files needed to create the NLM target above. +# These will be added as a library command in the link.opt file. +# +FILES_nlm_libs = \ + libcpre.o \ + $(EOLIST) + +# +# These are the modules that the above NLM target depends on to load. +# These will be added as a module command in the link.opt file. +# +FILES_nlm_modules = \ + aprlib \ + libc \ + proxy \ + $(EOLIST) + +# +# If the nlm has a msg file, put it's path here +# +FILE_nlm_msg = + +# +# If the nlm has a hlp file put it's path here +# +FILE_nlm_hlp = + +# +# If this is specified, it will override $(NWOS)\copyright.txt. +# +FILE_nlm_copyright = + +# +# Any additional imports go here +# +FILES_nlm_Ximports = \ + @$(APR)/aprlib.imp \ + @$(NWOS)/httpd.imp \ + @$(OBJDIR)/mod_proxy.imp \ + @libc.imp \ + $(EOLIST) + +# Don't link with Winsock if standard sockets are being used +ifndef USE_STDSOCKETS +FILES_nlm_Ximports += @ws2nlm.imp \ + $(EOLIST) +endif + +# +# Any symbols exported to here +# +FILES_nlm_exports = \ + proxy_fcgi_module \ + $(EOLIST) + +# +# These are the OBJ files needed to create the LIB target above. +# Paths must all use the '/' character +# +FILES_lib_objs = \ + $(EOLIST) + +# +# implement targets and dependancies (leave this section alone) +# + +libs :: $(OBJDIR) $(TARGET_lib) + +nlms :: libs $(TARGET_nlm) + +# +# Updated this target to create necessary directories and copy files to the +# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) +# +install :: nlms FORCE + +# +# Any specialized rules here +# + +vpath %.c ../arch/netware + +# +# Include the 'tail' makefile that has targets that depend on variables defined +# in this makefile +# + +include $(AP_WORK)\build\NWGNUtail.inc + + diff --git a/modules/proxy/mod_serf.dsp b/modules/proxy/mod_serf.dsp index cb11a017b6..4301c70d94 100644 --- a/modules/proxy/mod_serf.dsp +++ b/modules/proxy/mod_serf.dsp @@ -1,123 +1,123 @@ -# Microsoft Developer Studio Project File - Name="mod_serf" - Package Owner=<4> -# Microsoft Developer Studio Generated Build File, Format Version 6.00 -# ** DO NOT EDIT ** - -# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102 - -CFG=mod_serf - Win32 Release -!MESSAGE This is not a valid makefile. To build this project using NMAKE, -!MESSAGE use the Export Makefile command and run -!MESSAGE -!MESSAGE NMAKE /f "mod_serf.mak". -!MESSAGE -!MESSAGE You can specify a configuration when running NMAKE -!MESSAGE by defining the macro CFG on the command line. For example: -!MESSAGE -!MESSAGE NMAKE /f "mod_serf.mak" CFG="mod_serf - Win32 Release" -!MESSAGE -!MESSAGE Possible choices for configuration are: -!MESSAGE -!MESSAGE "mod_serf - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library") -!MESSAGE "mod_serf - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library") -!MESSAGE - -# Begin Project -# PROP AllowPerConfigDependencies 0 -# PROP Scc_ProjName "" -# PROP Scc_LocalPath "" -CPP=cl.exe -MTL=midl.exe -RSC=rc.exe - -!IF "$(CFG)" == "mod_serf - Win32 Release" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 0 -# PROP BASE Output_Dir "Release" -# PROP BASE Intermediate_Dir "Release" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 0 -# PROP Output_Dir "Release" -# PROP Intermediate_Dir "Release" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /FD /c -# ADD CPP /nologo /MD /W3 /O2 /Oy- /Zi /I "../../include" /I "../../srclib/apr/include" /I "../../srclib/apr-util/include" /I "../../srclib/serf" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /Fd"Release\mod_serf_src" /FD /c -# ADD BASE MTL /nologo /D "NDEBUG" /win32 -# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32 -# ADD BASE RSC /l 0x809 /d "NDEBUG" -# ADD RSC /l 0x409 /fo"Release/mod_serf.res" /i "../../include" /i "../../srclib/apr/include" /d "NDEBUG" /d BIN_NAME="mod_serf.so" /d LONG_NAME="serf_module for Apache" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /out:".\Release\mod_serf.so" /base:@..\..\os\win32\BaseAddr.ref,mod_serf.so -# ADD LINK32 libserf.lib kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /incremental:no /debug /out:".\Release\mod_serf.so" /libpath:..\..\srclib\serf\Release /base:@..\..\os\win32\BaseAddr.ref,mod_serf.so /opt:ref -# Begin Special Build Tool -TargetPath=.\Release\mod_serf.so -SOURCE="$(InputPath)" -PostBuild_Desc=Embed .manifest -PostBuild_Cmds=if exist $(TargetPath).manifest mt.exe -manifest $(TargetPath).manifest -outputresource:$(TargetPath);2 -# End Special Build Tool - -!ELSEIF "$(CFG)" == "mod_serf - Win32 Debug" - -# PROP BASE Use_MFC 0 -# PROP BASE Use_Debug_Libraries 1 -# PROP BASE Output_Dir "Debug" -# PROP BASE Intermediate_Dir "Debug" -# PROP BASE Target_Dir "" -# PROP Use_MFC 0 -# PROP Use_Debug_Libraries 1 -# PROP Output_Dir "Debug" -# PROP Intermediate_Dir "Debug" -# PROP Ignore_Export_Lib 0 -# PROP Target_Dir "" -# ADD BASE CPP /nologo /MDd /W3 /EHsc /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /FD /c -# ADD CPP /nologo /MDd /W3 /EHsc /Zi /Od /I "../../include" /I "../../srclib/apr/include" /I "../../srclib/apr-util/include" /I "../../srclib/serf" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /Fd"Debug\mod_serf_src" /FD /c -# ADD BASE MTL /nologo /D "_DEBUG" /win32 -# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32 -# ADD BASE RSC /l 0x809 /d "_DEBUG" -# ADD RSC /l 0x409 /fo"Debug/mod_serf.res" /i "../../include" /i "../../srclib/apr/include" /d "_DEBUG" /d BIN_NAME="mod_serf.so" /d LONG_NAME="serf_module for Apache" -BSC32=bscmake.exe -# ADD BASE BSC32 /nologo -# ADD BSC32 /nologo -LINK32=link.exe -# ADD BASE LINK32 kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /incremental:no /debug /out:".\Debug\mod_serf.so" /base:@..\..\os\win32\BaseAddr.ref,mod_serf.so -# ADD LINK32 libserf.lib kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /incremental:no /debug /out:".\Debug\mod_serf.so" /libpath:..\..\srclib\serf\Debug /base:@..\..\os\win32\BaseAddr.ref,mod_serf.so -# Begin Special Build Tool -TargetPath=.\Debug\mod_serf.so -SOURCE="$(InputPath)" -PostBuild_Desc=Embed .manifest -PostBuild_Cmds=if exist $(TargetPath).manifest mt.exe -manifest $(TargetPath).manifest -outputresource:$(TargetPath);2 -# End Special Build Tool - -!ENDIF - -# Begin Target - -# Name "mod_serf - Win32 Release" -# Name "mod_serf - Win32 Debug" -# Begin Group "Source Files" - -# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90" -# Begin Source File - -SOURCE=.\mod_serf.c -# End Source File -# End Group -# Begin Group "Header Files" - -# PROP Default_Filter ".h" -# Begin Source File - -SOURCE=.\mod_proxy.h -# End Source File -# End Group -# Begin Source File - -SOURCE=..\..\build\win32\httpd.rc -# End Source File -# End Target -# End Project +# Microsoft Developer Studio Project File - Name="mod_serf" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** DO NOT EDIT ** + +# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102 + +CFG=mod_serf - Win32 Release +!MESSAGE This is not a valid makefile. To build this project using NMAKE, +!MESSAGE use the Export Makefile command and run +!MESSAGE +!MESSAGE NMAKE /f "mod_serf.mak". +!MESSAGE +!MESSAGE You can specify a configuration when running NMAKE +!MESSAGE by defining the macro CFG on the command line. For example: +!MESSAGE +!MESSAGE NMAKE /f "mod_serf.mak" CFG="mod_serf - Win32 Release" +!MESSAGE +!MESSAGE Possible choices for configuration are: +!MESSAGE +!MESSAGE "mod_serf - Win32 Release" (based on "Win32 (x86) Dynamic-Link Library") +!MESSAGE "mod_serf - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +MTL=midl.exe +RSC=rc.exe + +!IF "$(CFG)" == "mod_serf - Win32 Release" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir "Release" +# PROP BASE Intermediate_Dir "Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir "Release" +# PROP Intermediate_Dir "Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MD /W3 /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /FD /c +# ADD CPP /nologo /MD /W3 /O2 /Oy- /Zi /I "../../include" /I "../../srclib/apr/include" /I "../../srclib/apr-util/include" /I "../../srclib/serf" /D "NDEBUG" /D "WIN32" /D "_WINDOWS" /Fd"Release\mod_serf_src" /FD /c +# ADD BASE MTL /nologo /D "NDEBUG" /win32 +# ADD MTL /nologo /D "NDEBUG" /mktyplib203 /win32 +# ADD BASE RSC /l 0x809 /d "NDEBUG" +# ADD RSC /l 0x409 /fo"Release/mod_serf.res" /i "../../include" /i "../../srclib/apr/include" /d "NDEBUG" /d BIN_NAME="mod_serf.so" /d LONG_NAME="serf_module for Apache" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /out:".\Release\mod_serf.so" /base:@..\..\os\win32\BaseAddr.ref,mod_serf.so +# ADD LINK32 libserf.lib kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /incremental:no /debug /out:".\Release\mod_serf.so" /libpath:..\..\srclib\serf\Release /base:@..\..\os\win32\BaseAddr.ref,mod_serf.so /opt:ref +# Begin Special Build Tool +TargetPath=.\Release\mod_serf.so +SOURCE="$(InputPath)" +PostBuild_Desc=Embed .manifest +PostBuild_Cmds=if exist $(TargetPath).manifest mt.exe -manifest $(TargetPath).manifest -outputresource:$(TargetPath);2 +# End Special Build Tool + +!ELSEIF "$(CFG)" == "mod_serf - Win32 Debug" + +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 1 +# PROP BASE Output_Dir "Debug" +# PROP BASE Intermediate_Dir "Debug" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 1 +# PROP Output_Dir "Debug" +# PROP Intermediate_Dir "Debug" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir "" +# ADD BASE CPP /nologo /MDd /W3 /EHsc /Zi /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /FD /c +# ADD CPP /nologo /MDd /W3 /EHsc /Zi /Od /I "../../include" /I "../../srclib/apr/include" /I "../../srclib/apr-util/include" /I "../../srclib/serf" /D "_DEBUG" /D "WIN32" /D "_WINDOWS" /Fd"Debug\mod_serf_src" /FD /c +# ADD BASE MTL /nologo /D "_DEBUG" /win32 +# ADD MTL /nologo /D "_DEBUG" /mktyplib203 /win32 +# ADD BASE RSC /l 0x809 /d "_DEBUG" +# ADD RSC /l 0x409 /fo"Debug/mod_serf.res" /i "../../include" /i "../../srclib/apr/include" /d "_DEBUG" /d BIN_NAME="mod_serf.so" /d LONG_NAME="serf_module for Apache" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /incremental:no /debug /out:".\Debug\mod_serf.so" /base:@..\..\os\win32\BaseAddr.ref,mod_serf.so +# ADD LINK32 libserf.lib kernel32.lib ws2_32.lib mswsock.lib /nologo /subsystem:windows /dll /incremental:no /debug /out:".\Debug\mod_serf.so" /libpath:..\..\srclib\serf\Debug /base:@..\..\os\win32\BaseAddr.ref,mod_serf.so +# Begin Special Build Tool +TargetPath=.\Debug\mod_serf.so +SOURCE="$(InputPath)" +PostBuild_Desc=Embed .manifest +PostBuild_Cmds=if exist $(TargetPath).manifest mt.exe -manifest $(TargetPath).manifest -outputresource:$(TargetPath);2 +# End Special Build Tool + +!ENDIF + +# Begin Target + +# Name "mod_serf - Win32 Release" +# Name "mod_serf - Win32 Debug" +# Begin Group "Source Files" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\mod_serf.c +# End Source File +# End Group +# Begin Group "Header Files" + +# PROP Default_Filter ".h" +# Begin Source File + +SOURCE=.\mod_proxy.h +# End Source File +# End Group +# Begin Source File + +SOURCE=..\..\build\win32\httpd.rc +# End Source File +# End Target +# End Project