Apache suEXEC Support

+ + suEXEC Support + +

The suEXEC feature provides + Apache users the ability + to run CGI and SSI programs + under user IDs different from the user ID of the calling + web-server. Normally, when a CGI or SSI program executes, it + runs as the same user who is running the web server.

+ +

Used properly, this feature can reduce + considerably the security risks involved with allowing users to + develop and run private CGI or SSI programs. However, if suEXEC + is improperly configured, it can cause any number of problems + and possibly create new holes in your computer's security. If + you aren't familiar with managing setuid root programs and the + security issues they present, we highly recommend that you not + consider using suEXEC.

+ +

Before we begin + +

Before jumping head-first into this document, + you should be aware of the assumptions made on the part of the + Apache Group and this document.

+ +

First, it is assumed that you are using a UNIX + derivate operating system that is capable of + setuid and setgid operations. + All command examples are given in this regard. Other platforms, + if they are capable of supporting suEXEC, may differ in their + configuration.

+ +

Second, it is assumed you are familiar with + some basic concepts of your computer's security and its + administration. This involves an understanding of + setuid/setgid operations and the various + effects they may have on your system and its level of + security.

+ +

Third, it is assumed that you are using an + unmodified version of suEXEC code. All code + for suEXEC has been carefully scrutinized and tested by the + developers as well as numerous beta testers. Every precaution + has been taken to ensure a simple yet solidly safe base of + code. Altering this code can cause unexpected problems and new + security risks. It is highly recommended you + not alter the suEXEC code unless you are well versed in the + particulars of security programming and are willing to share + your work with the Apache Group for consideration.

+ +

Fourth, and last, it has been the decision of + the Apache Group to NOT make suEXEC part of + the default installation of Apache. To this end, suEXEC + configuration requires of the administrator careful attention + to details. After due consideration has been given to the + various settings for suEXEC, the administrator may install + suEXEC through normal installation methods. The values for + these settings need to be carefully determined and specified by + the administrator to properly maintain system security during + the use of suEXEC functionality. It is through this detailed + process that the Apache Group hopes to limit suEXEC + installation only to those who are careful and determined + enough to use it.

+ +

Still with us? Yes? Good. Let's move on!

+ +

suEXEC Security Model + +

Before we begin configuring and installing + suEXEC, we will first discuss the security model you are about + to implement. By doing so, you may better understand what + exactly is going on inside suEXEC and what precautions are + taken to ensure your system's security.

+ +

suEXEC is based on a setuid + "wrapper" program that is called by the main Apache web server. + This wrapper is called when an HTTP request is made for a CGI + or SSI program that the administrator has designated to run as + a userid other than that of the main server. When such a + request is made, Apache provides the suEXEC wrapper with the + program's name and the user and group IDs under which the + program is to execute.

+ +

The wrapper then employs the following process + to determine success or failure -- if any one of these + conditions fail, the program logs the failure and exits with an + error, otherwise it will continue:

+ +

+ Was the wrapper called with the proper number of + arguments? + +
+ The wrapper will only execute if it is given the proper + number of arguments. The proper argument format is known + to the Apache web server. If the wrapper is not receiving + the proper number of arguments, it is either being + hacked, or there is something wrong with the suEXEC + portion of your Apache binary. +
+
+ Is the user executing this wrapper a valid user of + this system? + +
+ This is to ensure that the user executing the wrapper is + truly a user of the system. +
+
+ Is this valid user allowed to run the + wrapper? + +
+ Is this user the user allowed to run this wrapper? Only + one user (the Apache user) is allowed to execute this + program. +
+
+ Does the target program have an unsafe hierarchical + reference? + +
+ Does the target program contain a leading '/' or have a + '..' backreference? These are not allowed; the target + program must reside within the Apache webspace. +
+
+ Is the target user name valid? + +
+ Does the target user exist? +
+
+ Is the target group name valid? + +
+ Does the target group exist? +
+
+ Is the target user NOT superuser? + + +
+ Presently, suEXEC does not allow 'root' to execute + CGI/SSI programs. +
+
+ Is the target userid ABOVE the minimum ID + number? + +
+ The minimum user ID number is specified during + configuration. This allows you to set the lowest possible + userid that will be allowed to execute CGI/SSI programs. + This is useful to block out "system" accounts. +
+
+ Is the target group NOT the superuser + group? + +
+ Presently, suEXEC does not allow the 'root' group to + execute CGI/SSI programs. +
+
+ Is the target groupid ABOVE the minimum ID + number? + +
+ The minimum group ID number is specified during + configuration. This allows you to set the lowest possible + groupid that will be allowed to execute CGI/SSI programs. + This is useful to block out "system" groups. +
+
+ Can the wrapper successfully become the target user + and group? + +
+ Here is where the program becomes the target user and + group via setuid and setgid calls. The group access list + is also initialized with all of the groups of which the + user is a member. +
+
+ Does the directory in which the program resides + exist? + +
+ If it doesn't exist, it can't very well contain files. +
+
+ Is the directory within the Apache + webspace? + +
+ If the request is for a regular portion of the server, is + the requested directory within the server's document + root? If the request is for a UserDir, is the requested + directory within the user's document root? +
+
+ Is the directory NOT writable by anyone + else? + +
+ We don't want to open up the directory to others; only + the owner user may be able to alter this directories + contents. +
+
+ Does the target program exist? + +
+ If it doesn't exists, it can't very well be executed. +
+
+ Is the target program NOT writable by + anyone else? + +
+ We don't want to give anyone other than the owner the + ability to change the program. +
+
+ Is the target program NOT setuid or + setgid? + +
+ We do not want to execute programs that will then change + our UID/GID again. +
+
+ Is the target user/group the same as the program's + user/group? + +
+ Is the user the owner of the file? +
+
+ Can we successfully clean the process environment + to ensure safe operations? + +
+ suEXEC cleans the process' environment by establishing a + safe execution PATH (defined during configuration), as + well as only passing through those variables whose names + are listed in the safe environment list (also created + during configuration). +
+
+ Can we successfully become the target program and + execute? + +
+ Here is where suEXEC ends and the target program begins. +
+

+ +

This is the standard operation of the the + suEXEC wrapper's security model. It is somewhat stringent and + can impose new limitations and guidelines for CGI/SSI design, + but it was developed carefully step-by-step with security in + mind.

+ +

For more information as to how this security + model can limit your possibilities in regards to server + configuration, as well as what security risks can be avoided + with a proper suEXEC setup, see the "Beware the Jabberwock" section of this + document.

+ +

Configuring & Installing + suEXEC + +

Here's where we begin the fun.

+ +

suEXEC configuration + options
+

+ +

--enable-suexec: This option enables the suEXEC feature which is never + installed or activated by default. At least one + --with-suexec-xxxxx option has to be provided together with the + --enable-suexec option to let APACI accept your request for + using the suEXEC feature.
--with-suexec-bin=PATH: The path to the suexec binary must be hard-coded in + the server for security reasons. Use this option to override + the default path. e.g. + --with-suexec-bin=/usr/sbin/suexec
--with-suexec-caller=UID: The username under which + Apache normally runs. This is the only user allowed to + execute this program.
--with-suexec-userdir=DIR: Define to be the subdirectory under users' home + directories where suEXEC access should be allowed. All + executables under this directory will be executable by suEXEC + as the user so they should be "safe" programs. If you are + using a "simple" UserDir directive (ie. one without a "*" in + it) this should be set to the same value. suEXEC will not + work properly in cases where the UserDir directive points to + a location that is not the same as the user's home directory + as referenced in the passwd file. Default value is + "public_html".
+ If you have virtual hosts with a different UserDir for each, + you will need to define them to all reside in one parent + directory; then name that parent directory here. If + this is not defined properly, "~userdir" cgi requests will + not work!
--with-suexec-docroot=DIR: Define as the DocumentRoot set for Apache. This will be + the only hierarchy (aside from UserDirs) that can be used for + suEXEC behavior. The default directory is the --datadir value + with the suffix "/htdocs", e.g. if you configure + with "--datadir=/home/apache" the directory + "/home/apache/htdocs" is used as document root for the suEXEC + wrapper.
--with-suexec-uidmin=UID: Define this as the lowest UID allowed to be a target user + for suEXEC. For most systems, 500 or 100 is common. Default + value is 100.
--with-suexec-gidmin=GID: Define this as the lowest GID allowed to be a target + group for suEXEC. For most systems, 100 is common and + therefore used as default value.
--with-suexec-logfile=FILE: This defines the filename to which all suEXEC + transactions and errors are logged (useful for auditing and + debugging purposes). By default the logfile is named + "suexec_log" and located in your standard logfile directory + (--logfiledir).
--with-suexec-safepath=PATH: Define a safe PATH environment to pass to CGI + executables. Default value is + "/usr/local/bin:/usr/bin:/bin".

+ +

Checking your suEXEC + setup
+ Before you compile and install the suEXEC wrapper you can + check the configuration with the --layout option.
+ Example output:

+ + + suEXEC setup:
+ suexec binary: /usr/local/apache/sbin/suexec
+ document root: /usr/local/apache/share/htdocs
+ userdir suffix: public_html
+ logfile: /usr/local/apache/var/log/suexec_log
+ safe path: /usr/local/bin:/usr/bin:/bin
+ caller ID: www
+ minimum user ID: 100
+ minimum group ID: 100
+ + +

Compiling and installing the suEXEC + wrapper
+ If you have enabled the suEXEC feature with the + --enable-suexec option the suexec binary (together with Apache + itself) is automatically built if you execute the command + "make".
+ After all components have been built you can execute the + command "make install" to install them. The binary image + "suexec" is installed in the directory defined by the --sbindir + option. Default location is + "/usr/local/apache/sbin/suexec".
+ Please note that you need root + privileges for the installation step. In order + for the wrapper to set the user ID, it must be installed as + owner root and must have the setuserid + execution bit set for file modes.

+ +

Enabling & Disabling + suEXEC + +

Upon startup of Apache, it looks for the file + "suexec" in the "sbin" directory (default is + "/usr/local/apache/sbin/suexec"). If Apache finds a properly + configured suEXEC wrapper, it will print the following message + to the error log:

+ + [notice] suEXEC mechanism enabled (wrapper: /path/to/suexec) + +

If you don't see this message at server startup, the server is + most likely not finding the wrapper program where it expects + it, or the executable is not installed setuid root.

+ +

If you want to enable the suEXEC mechanism for the first time + and an Apache server is already running you must kill and + restart Apache. Restarting it with a simple HUP or USR1 signal + will not be enough.

If you want to disable suEXEC you should kill and restart + Apache after you have removed the "suexec" file.

+ +

Using suEXEC + +

Virtual Hosts:
One way to use the suEXEC + wrapper is through the SuexecUserGroup directive in + VirtualHost definitions. By + setting this directive to values different from the main server + user ID, all requests for CGI resources will be executed as the + User and Group defined for that VirtualHost. If this + directive is not specified for a VirtualHost then the main server userid + is assumed.

+ +

User directories:
+ The suEXEC wrapper can also be used to execute CGI programs as + the user to which the request is being directed. This is + accomplished by using the "~" + character prefixing the user ID for whom execution is desired. + The only requirement needed for this feature to work is for CGI + execution to be enabled for the user and that the script must + meet the scrutiny of the security checks + above.

+ +

Debugging suEXEC + +

The suEXEC wrapper will write log information + to the file defined with the --with-suexec-logfile option as + indicated above. If you feel you have configured and installed + the wrapper properly, have a look at this log and the error_log + for the server to see where you may have gone astray.

+ +

Beware the Jabberwock: + Warnings & Examples + +

NOTE! This section may not be + complete. For the latest revision of this section of the + documentation, see the Apache Group's Online + Documentation version.

+ +

There are a few points of interest regarding + the wrapper that can cause limitations on server setup. Please + review these before submitting any "bugs" regarding suEXEC.

+ +

suEXEC Points Of Interest
+ Hierarchy limitations + +
+ For security and efficiency reasons, all suexec requests + must remain within either a top-level document root for + virtual host requests, or one top-level personal document + root for userdir requests. For example, if you have four + VirtualHosts configured, you would need to structure all + of your VHosts' document roots off of one main Apache + document hierarchy to take advantage of suEXEC for + VirtualHosts. (Example forthcoming.) +
+
+ suEXEC's PATH environment variable + +
+ This can be a dangerous thing to change. Make certain + every path you include in this define is a + trusted directory. You don't want to + open people up to having someone from across the world + running a trojan horse on them. +
+
+ Altering the suEXEC code + +
+ Again, this can cause Big Trouble if you + try this without knowing what you are doing. Stay away + from it if at all possible. +
+

+ +

Apache suEXEC Support

What is suEXEC?

Apache HTTP Server Version 2.0

suEXEC Support

Before we begin

Before we begin.

suEXEC Security Model

suEXEC Security Model

Configuring & Installing + suEXEC

Configuring & Installing - suEXEC

Enabling & Disabling - suEXEC

Enabling & Disabling + suEXEC

Using suEXEC

Using suEXEC

Debugging suEXEC

Debugging suEXEC

Beware the Jabberwock: - Warnings & Examples

Beware the Jabberwock: + Warnings & Examples

Apache HTTP Server Version 2.0