Remove silent_mode. You get the same functionality with "pg_ctl -l

postmaster.log", or nohup.

There was a small issue with LINUX_OOM_ADJ and silent_mode, namely that with
silent_mode the postmaster process incorrectly used the OOM settings meant
for backend processes. We certainly could've fixed that directly, but since
silent_mode was redundant anyway, we might as well just remove it.

diff --git a/doc/src/sgml/config.sgml b/doc/src/sgml/config.sgml
index 3f6986fc1bea680e1de8d3343569f97b54595392..bce9520a6504c58d9d0889745e4655f8ced62841 100644 (file)
--- a/doc/src/sgml/config.sgml
+++ b/doc/src/sgml/config.sgml
@@ -3201,36 +3201,6 @@ local0.*    /var/log/postgresql
        </listitem>
       </varlistentry>
 
-     <varlistentry id="guc-silent-mode" xreflabel="silent_mode">
-      <term><varname>silent_mode</varname> (<type>boolean</type>)</term>
-      <indexterm>
-       <primary><varname>silent_mode</> configuration parameter</primary>
-      </indexterm>
-      <listitem>
-       <para>
-        Runs the server silently. If this parameter is set, the server
-        will automatically run in background and disassociate from the
-        controlling terminal.
-        This parameter can only be set at server start.
-       </para>
-
-       <caution>
-       <para>
-        When this parameter is set,
-        the server's standard output and standard error are redirected
-        to the file <filename>postmaster.log</> within the data directory.
-        There is no provision for rotating this file, so it will grow
-        indefinitely unless server log output is redirected elsewhere
-        by other settings.  It is recommended that <varname>log_destination</>
-        be set to <literal>syslog</> or that <varname>logging_collector</> be
-        enabled when using this option.  Even with those measures, errors
-        reported early during startup may appear in
-        <filename>postmaster.log</> rather than the normal log destination.
-       </para>
-       </caution>
-      </listitem>
-     </varlistentry>
-
       </variablelist>
     </sect2>
      <sect2 id="runtime-config-logging-when">

diff --git a/src/backend/postmaster/postmaster.c b/src/backend/postmaster/postmaster.c
index 6572292a40f72f13a36c4eeaacf5be224bf4246f..b9bd50c6713052d386d79525bea1d11c517f3363 100644 (file)
--- a/src/backend/postmaster/postmaster.c
+++ b/src/backend/postmaster/postmaster.c
@@ -58,8 +58,7 @@
  * Error Reporting:
  *             Use write_stderr() only for reporting "interactive" errors
  *             (essentially, bogus arguments on the command line).  Once the
- *             postmaster is launched, use ereport().  In particular, don't use
- *             write_stderr() for anything that occurs after pmdaemonize.
+ *             postmaster is launched, use ereport().
  *
  *-------------------------------------------------------------------------
  */
@@ -192,7 +191,6 @@ static int  SendStop = false;
 
 /* still more option variables */
 bool           EnableSSL = false;
-bool           SilentMode = false; /* silent_mode */
 
 int                    PreAuthDelay = 0;
 int                    AuthenticationTimeout = 60;
@@ -326,7 +324,6 @@ static DNSServiceRef bonjour_sdref = NULL;
  */
 static void getInstallationPaths(const char *argv0);
 static void checkDataDir(void);
-static void pmdaemonize(void);
 static Port *ConnCreate(int serverFd);
 static void ConnFree(Port *port);
 static void reset_shared(int port);
@@ -777,15 +774,6 @@ PostmasterMain(int argc, char *argv[])
                         (errmsg_internal("-----------------------------------------")));
        }
 
-       /*
-        * Fork away from controlling terminal, if silent_mode specified.
-        *
-        * Must do this before we grab any interlock files, else the interlocks
-        * will show the wrong PID.
-        */
-       if (SilentMode)
-               pmdaemonize();
-
        /*
         * Create lockfile for data directory.
         *
@@ -1270,105 +1258,6 @@ checkDataDir(void)
        FreeFile(fp);
 }
 
-
-/*
- * Fork away from the controlling terminal (silent_mode option)
- *
- * Since this requires disconnecting from stdin/stdout/stderr (in case they're
- * linked to the terminal), we re-point stdin to /dev/null and stdout/stderr
- * to "postmaster.log" in the data directory, where we're already chdir'd.
- */
-static void
-pmdaemonize(void)
-{
-#ifndef WIN32
-       const char *pmlogname = "postmaster.log";
-       int                     dvnull;
-       int                     pmlog;
-       pid_t           pid;
-       int                     res;
-
-       /*
-        * Make sure we can open the files we're going to redirect to.  If this
-        * fails, we want to complain before disconnecting.  Mention the full path
-        * of the logfile in the error message, even though we address it by
-        * relative path.
-        */
-       dvnull = open(DEVNULL, O_RDONLY, 0);
-       if (dvnull < 0)
-       {
-               write_stderr("%s: could not open file \"%s\": %s\n",
-                                        progname, DEVNULL, strerror(errno));
-               ExitPostmaster(1);
-       }
-       pmlog = open(pmlogname, O_CREAT | O_WRONLY | O_APPEND, S_IRUSR | S_IWUSR);
-       if (pmlog < 0)
-       {
-               write_stderr("%s: could not open log file \"%s/%s\": %s\n",
-                                        progname, DataDir, pmlogname, strerror(errno));
-               ExitPostmaster(1);
-       }
-
-       /*
-        * Okay to fork.
-        */
-       pid = fork_process();
-       if (pid == (pid_t) -1)
-       {
-               write_stderr("%s: could not fork background process: %s\n",
-                                        progname, strerror(errno));
-               ExitPostmaster(1);
-       }
-       else if (pid)
-       {                                                       /* parent */
-               /* Parent should just exit, without doing any atexit cleanup */
-               _exit(0);
-       }
-
-       MyProcPid = PostmasterPid = getpid();           /* reset PID vars to child */
-
-       MyStartTime = time(NULL);
-
-       /*
-        * Some systems use setsid() to dissociate from the TTY's process group,
-        * while on others it depends on stdin/stdout/stderr.  Do both if
-        * possible.
-        */
-#ifdef HAVE_SETSID
-       if (setsid() < 0)
-       {
-               write_stderr("%s: could not dissociate from controlling TTY: %s\n",
-                                        progname, strerror(errno));
-               ExitPostmaster(1);
-       }
-#endif
-
-       /*
-        * Reassociate stdin/stdout/stderr.  fork_process() cleared any pending
-        * output, so this should be safe.      The only plausible error is EINTR,
-        * which just means we should retry.
-        */
-       do
-       {
-               res = dup2(dvnull, 0);
-       } while (res < 0 && errno == EINTR);
-       close(dvnull);
-       do
-       {
-               res = dup2(pmlog, 1);
-       } while (res < 0 && errno == EINTR);
-       do
-       {
-               res = dup2(pmlog, 2);
-       } while (res < 0 && errno == EINTR);
-       close(pmlog);
-#else                                                  /* WIN32 */
-       /* not supported */
-       elog(FATAL, "silent_mode is not supported under Windows");
-#endif   /* WIN32 */
-}
-
-
 /*
  * Main idle loop of postmaster
  */

diff --git a/src/backend/utils/misc/guc.c b/src/backend/utils/misc/guc.c
index 6e85cb533576abab4678e1d5ee4e573cc490f12d..c5782e2de2f9dbb92dfb3cdb62540f068be397f7 100644 (file)
--- a/src/backend/utils/misc/guc.c
+++ b/src/backend/utils/misc/guc.c
@@ -824,16 +824,6 @@ static struct config_bool ConfigureNamesBool[] =
                true,
                NULL, NULL, NULL
        },
-       {
-               {"silent_mode", PGC_POSTMASTER, LOGGING_WHERE,
-                       gettext_noop("Runs the server silently."),
-                       gettext_noop("If this parameter is set, the server will automatically run in the "
-                                "background and any controlling terminals are dissociated.")
-               },
-               &SilentMode,
-               false,
-               NULL, NULL, NULL
-       },
        {
                {"log_checkpoints", PGC_SIGHUP, LOGGING_WHAT,
                        gettext_noop("Logs each checkpoint."),

diff --git a/src/backend/utils/misc/postgresql.conf.sample b/src/backend/utils/misc/postgresql.conf.sample
index 655dad42c7111e1c69202ca17de4882c53efdcaf..229d0e86a9b4fbe47b41c9ee2389f53ef75fd0f1 100644 (file)
--- a/src/backend/utils/misc/postgresql.conf.sample
+++ b/src/backend/utils/misc/postgresql.conf.sample
@@ -300,11 +300,6 @@
 #syslog_facility = 'LOCAL0'
 #syslog_ident = 'postgres'
 
-#silent_mode = off                     # Run server silently.
-                                       # DO NOT USE without syslog or
-                                       # logging_collector
-                                       # (change requires restart)
-
 
 # - When to Log -