ac_help="$ac_help
--enable-cassert enable assertion checks (for debugging)"
ac_help="$ac_help
- --with-tcl build Tcl interfaces and pgtclsh"
+ --with-tcl build Tcl and Tk interfaces"
+ac_help="$ac_help
+ --without-tk do not build Tk interfaces if Tcl is enabled"
ac_help="$ac_help
--with-tclconfig=DIR tclConfig.sh and tkConfig.sh are in DIR"
ac_help="$ac_help
ac_help="$ac_help
--with-krb5[=DIR] build with Kerberos 5 support [/usr/athena]"
ac_help="$ac_help
- --with-krb-srvnam=NAME name of the PostgreSQL service principal in Kerberos"
+ --with-krb-srvnam=NAME name of the PostgreSQL service principal in Kerberos [postgres]"
ac_help="$ac_help
--with-openssl[=DIR] build with OpenSSL support [/usr/local/ssl]"
ac_help="$ac_help
--with-CXX build C++ modules (libpq++)"
ac_help="$ac_help
--enable-syslog enable logging to syslog"
-ac_help="$ac_help
- --with-x use the X Window System"
# Initialize some variables set by options.
# The variables have the same names as the options, with
IFS=$ac_save_IFS
-
-# We exclude tcl support unless user says --with-tcl
-echo $ac_n "checking setting USE_TCL""... $ac_c" 1>&6
-echo "configure:1529: checking setting USE_TCL" >&5
+#
+# Tcl/Tk
+#
+echo $ac_n "checking whether to build with Tcl""... $ac_c" 1>&6
+echo "configure:1530: checking whether to build with Tcl" >&5
# Check whether --with-tcl was given
if test x"${with_tcl+set}" = xset; then
case $with_tcl in
yes)
- USE_TCL=true; USE_TK=true; echo "$ac_t""enabled" 1>&6
+ :
;;
no)
- USE_TCL=; USE_TK=; echo "$ac_t""disabled" 1>&6
+ :
;;
*)
withval=$with_tcl
esac # $with_tcl
else
with_tcl=no
-USE_TCL=; USE_TK=; echo "$ac_t""disabled" 1>&6
+
fi
+echo "$ac_t""$with_tcl" 1>&6
+
+
+# If Tcl is enabled (above) then Tk is also, unless the user disables it using --without-tk
+echo $ac_n "checking whether to build with Tk""... $ac_c" 1>&6
+echo "configure:1554: checking whether to build with Tk" >&5
+if test "$with_tcl" = yes; then
+ # Check whether --with-tk was given
+if test x"${with_tk+set}" = xset; then
+ case $with_tk in
+ yes)
+ :
+ ;;
+ no)
+ :
+ ;;
+ *)
+ withval=$with_tk
+ { echo "configure: error: no argument expected for --with-tk option" 1>&2; exit 1; }
+ ;;
+ esac # $with_tk
+else
+ with_tk=yes
+fi
+else
+ with_tk=no
+fi
+echo "$ac_t""$with_tk" 1>&6
no)
{ echo "configure: error: argument required for --with-tclconfig option" 1>&2; exit 1; }
;;
- *)
- withval=$with_tclconfig
- TCL_DIRS=$withval
- ;;
esac # $with_tclconfig
fi
-
# We see if the path to the TK configuration scripts is specified.
# This will override the use of tclsh to find the paths to search.
no)
{ echo "configure: error: argument required for --with-tkconfig option" 1>&2; exit 1; }
;;
- *)
- withval=$with_tkconfig
- TK_DIRS=$withval
- ;;
esac # $with_tkconfig
fi
# Optionally build Perl modules (Pg.pm and PL/Perl)
#
echo $ac_n "checking whether to build Perl modules""... $ac_c" 1>&6
-echo "configure:1596: checking whether to build Perl modules" >&5
+echo "configure:1616: checking whether to build Perl modules" >&5
# Check whether --with-perl was given
if test x"${with_perl+set}" = xset; then
case $with_perl in
# Optionally build Python interface module
#
echo $ac_n "checking whether to build Python modules""... $ac_c" 1>&6
-echo "configure:1623: checking whether to build Python modules" >&5
+echo "configure:1643: checking whether to build Python modules" >&5
# Check whether --with-python was given
if test x"${with_python+set}" = xset; then
case $with_python in
# Extract the first word of "python", so it can be a program name with args.
set dummy python; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1632: checking for $ac_word" >&5
+echo "configure:1652: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_PYTHON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
python_extmakefile="${python_configdir}/Makefile.pre.in"
echo $ac_n "checking for Python extension makefile""... $ac_c" 1>&6
-echo "configure:1668: checking for Python extension makefile" >&5
+echo "configure:1688: checking for Python extension makefile" >&5
if test -f "${python_extmakefile}" ; then
echo "$ac_t""found" 1>&6
else
fi
echo $ac_n "checking whether to build the ODBC driver""... $ac_c" 1>&6
-echo "configure:1900: checking whether to build the ODBC driver" >&5
+echo "configure:1920: checking whether to build the ODBC driver" >&5
# Check whether --enable-odbc was given
if test x"${enable_odbc+set}" = xset; then
case $enable_odbc in
esac
cat > conftest.$ac_ext <<EOF
-#line 1953 "configure"
+#line 1973 "configure"
#include "confdefs.h"
#if __ELF__
yes
# Optionally build C++ code (i.e., libpq++)
#
echo $ac_n "checking whether to build C++ modules""... $ac_c" 1>&6
-echo "configure:1982: checking whether to build C++ modules" >&5
+echo "configure:2002: checking whether to build C++ modules" >&5
# Check whether --with-CXX was given
if test x"${with_CXX+set}" = xset; then
case $with_CXX in
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2010: checking for $ac_word" >&5
+echo "configure:2030: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2042: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
+echo "configure:2062: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 2053 "configure"
+#line 2073 "configure"
#include "confdefs.h"
int main(){return(0);}
EOF
-if { (eval echo configure:2058: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2078: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cxx_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2084: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2104: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:2089: checking whether we are using GNU C++" >&5
+echo "configure:2109: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:2098: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:2118: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:2117: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:2137: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:2149: checking how to run the C++ preprocessor" >&5
+echo "configure:2169: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 2162 "configure"
+#line 2182 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2167: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2187: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
ac_safe=`echo "string" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for string""... $ac_c" 1>&6
-echo "configure:2201: checking for string" >&5
+echo "configure:2221: checking for string" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2206 "configure"
+#line 2226 "configure"
#include "confdefs.h"
#include <string>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2211: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2231: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test x"$ac_cv_header_string" != xyes ; then
echo $ac_n "checking for class string in <string.h>""... $ac_c" 1>&6
-echo "configure:2238: checking for class string in <string.h>" >&5
+echo "configure:2258: checking for class string in <string.h>" >&5
if eval "test \"`echo '$''{'pgac_cv_class_string_in_string_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2243 "configure"
+#line 2263 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <stdlib.h>
string foo = "test"
; return 0; }
EOF
-if { (eval echo configure:2253: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2273: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
pgac_cv_class_string_in_string_h=yes
else
echo $ac_n "checking for namespace std in C++""... $ac_c" 1>&6
-echo "configure:2280: checking for namespace std in C++" >&5
+echo "configure:2300: checking for namespace std in C++" >&5
if eval "test \"`echo '$''{'pgac_cv_cxx_namespace_std'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cxx_cross
cat > conftest.$ac_ext <<EOF
-#line 2294 "configure"
+#line 2314 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:2307: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2327: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
pgac_cv_cxx_namespace_std=yes
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2363: checking for a BSD compatible install" >&5
+echo "configure:2383: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2445: checking for $ac_word" >&5
+echo "configure:2465: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
done
echo $ac_n "checking for flex""... $ac_c" 1>&6
-echo "configure:2475: checking for flex" >&5
+echo "configure:2495: checking for flex" >&5
if eval "test \"`echo '$''{'pgac_cv_path_flex'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:2543: checking whether ln -s works" >&5
+echo "configure:2563: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2566: checking for $ac_word" >&5
+echo "configure:2586: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "tar", so it can be a program name with args.
set dummy tar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2596: checking for $ac_word" >&5
+echo "configure:2616: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_tar'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2633: checking for $ac_word" >&5
+echo "configure:2653: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_PERL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2667: checking for $ac_word" >&5
+echo "configure:2687: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$YACC" || YACC="yacc"
+if test "$with_tk" = yes; then
+ # Extract the first word of "wish", so it can be a program name with args.
+set dummy wish; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2722: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_path_WISH'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case "$WISH" in
+ /*)
+ ac_cv_path_WISH="$WISH" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ ac_cv_path_WISH="$WISH" # Let the user override the test with a dos path.
+ ;;
+ *)
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_path_WISH="$ac_dir/$ac_word"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+fi
+WISH="$ac_cv_path_WISH"
+if test -n "$WISH"; then
+ echo "$ac_t""$WISH" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ test -z "$WISH" && { echo "configure: error: \`wish' is required for Tk support" 1>&2; exit 1; }
+fi
##
##
echo $ac_n "checking for main in -lsfio""... $ac_c" 1>&6
-echo "configure:2705: checking for main in -lsfio" >&5
+echo "configure:2763: checking for main in -lsfio" >&5
ac_lib_var=`echo sfio'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsfio $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2713 "configure"
+#line 2771 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2720: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2778: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lncurses""... $ac_c" 1>&6
-echo "configure:2748: checking for main in -lncurses" >&5
+echo "configure:2806: checking for main in -lncurses" >&5
ac_lib_var=`echo ncurses'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lncurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2756 "configure"
+#line 2814 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2763: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2821: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for main in -lcurses""... $ac_c" 1>&6
-echo "configure:2789: checking for main in -lcurses" >&5
+echo "configure:2847: checking for main in -lcurses" >&5
ac_lib_var=`echo curses'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcurses $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2797 "configure"
+#line 2855 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2804: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2862: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -ltermcap""... $ac_c" 1>&6
-echo "configure:2834: checking for main in -ltermcap" >&5
+echo "configure:2892: checking for main in -ltermcap" >&5
ac_lib_var=`echo termcap'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ltermcap $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2842 "configure"
+#line 2900 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2849: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2907: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lreadline""... $ac_c" 1>&6
-echo "configure:2877: checking for main in -lreadline" >&5
+echo "configure:2935: checking for main in -lreadline" >&5
ac_lib_var=`echo readline'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lreadline $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2885 "configure"
+#line 2943 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2892: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2950: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for using_history in -lreadline""... $ac_c" 1>&6
-echo "configure:2920: checking for using_history in -lreadline" >&5
+echo "configure:2978: checking for using_history in -lreadline" >&5
ac_lib_var=`echo readline'_'using_history | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lreadline $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2928 "configure"
+#line 2986 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
using_history()
; return 0; }
EOF
-if { (eval echo configure:2939: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2997: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for main in -lhistory""... $ac_c" 1>&6
-echo "configure:2961: checking for main in -lhistory" >&5
+echo "configure:3019: checking for main in -lhistory" >&5
ac_lib_var=`echo history'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lhistory $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2969 "configure"
+#line 3027 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:2976: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3034: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$PORTNAME" != "aix" -a "$PORTNAME" != "alpha"
then
echo $ac_n "checking for main in -lbsd""... $ac_c" 1>&6
-echo "configure:3009: checking for main in -lbsd" >&5
+echo "configure:3067: checking for main in -lbsd" >&5
ac_lib_var=`echo bsd'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lbsd $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3017 "configure"
+#line 3075 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3024: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3082: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for setproctitle in -lutil""... $ac_c" 1>&6
-echo "configure:3053: checking for setproctitle in -lutil" >&5
+echo "configure:3111: checking for setproctitle in -lutil" >&5
ac_lib_var=`echo util'_'setproctitle | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lutil $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3061 "configure"
+#line 3119 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
setproctitle()
; return 0; }
EOF
-if { (eval echo configure:3072: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3130: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
-echo "configure:3100: checking for main in -lm" >&5
+echo "configure:3158: checking for main in -lm" >&5
ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3108 "configure"
+#line 3166 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3115: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3173: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -ldl""... $ac_c" 1>&6
-echo "configure:3143: checking for main in -ldl" >&5
+echo "configure:3201: checking for main in -ldl" >&5
ac_lib_var=`echo dl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3151 "configure"
+#line 3209 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3158: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3216: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
-echo "configure:3186: checking for main in -lsocket" >&5
+echo "configure:3244: checking for main in -lsocket" >&5
ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3194 "configure"
+#line 3252 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
-echo "configure:3229: checking for main in -lnsl" >&5
+echo "configure:3287: checking for main in -lnsl" >&5
ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3237 "configure"
+#line 3295 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3244: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lipc""... $ac_c" 1>&6
-echo "configure:3272: checking for main in -lipc" >&5
+echo "configure:3330: checking for main in -lipc" >&5
ac_lib_var=`echo ipc'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3280 "configure"
+#line 3338 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3287: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3345: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lIPC""... $ac_c" 1>&6
-echo "configure:3315: checking for main in -lIPC" >&5
+echo "configure:3373: checking for main in -lIPC" >&5
ac_lib_var=`echo IPC'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lIPC $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3323 "configure"
+#line 3381 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3388: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -llc""... $ac_c" 1>&6
-echo "configure:3358: checking for main in -llc" >&5
+echo "configure:3416: checking for main in -llc" >&5
ac_lib_var=`echo lc'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-llc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3366 "configure"
+#line 3424 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3373: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3431: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -ldld""... $ac_c" 1>&6
-echo "configure:3401: checking for main in -ldld" >&5
+echo "configure:3459: checking for main in -ldld" >&5
ac_lib_var=`echo dld'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldld $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3409 "configure"
+#line 3467 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3416: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3474: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lln""... $ac_c" 1>&6
-echo "configure:3444: checking for main in -lln" >&5
+echo "configure:3502: checking for main in -lln" >&5
ac_lib_var=`echo ln'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lln $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3452 "configure"
+#line 3510 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3459: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lld""... $ac_c" 1>&6
-echo "configure:3487: checking for main in -lld" >&5
+echo "configure:3545: checking for main in -lld" >&5
ac_lib_var=`echo ld'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lld $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3495 "configure"
+#line 3553 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3560: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lcompat""... $ac_c" 1>&6
-echo "configure:3530: checking for main in -lcompat" >&5
+echo "configure:3588: checking for main in -lcompat" >&5
ac_lib_var=`echo compat'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcompat $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3538 "configure"
+#line 3596 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3545: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3603: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lBSD""... $ac_c" 1>&6
-echo "configure:3573: checking for main in -lBSD" >&5
+echo "configure:3631: checking for main in -lBSD" >&5
ac_lib_var=`echo BSD'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lBSD $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3581 "configure"
+#line 3639 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3588: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3646: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lgen""... $ac_c" 1>&6
-echo "configure:3616: checking for main in -lgen" >&5
+echo "configure:3674: checking for main in -lgen" >&5
ac_lib_var=`echo gen'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lgen $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3624 "configure"
+#line 3682 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3631: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lPW""... $ac_c" 1>&6
-echo "configure:3659: checking for main in -lPW" >&5
+echo "configure:3717: checking for main in -lPW" >&5
ac_lib_var=`echo PW'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lPW $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3667 "configure"
+#line 3725 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3674: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3732: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for library containing crypt""... $ac_c" 1>&6
-echo "configure:3703: checking for library containing crypt" >&5
+echo "configure:3761: checking for library containing crypt" >&5
if eval "test \"`echo '$''{'ac_cv_search_crypt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
ac_cv_search_crypt="no"
cat > conftest.$ac_ext <<EOF
-#line 3710 "configure"
+#line 3768 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
crypt()
; return 0; }
EOF
-if { (eval echo configure:3721: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_crypt="none required"
else
test "$ac_cv_search_crypt" = "no" && for i in crypt; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3732 "configure"
+#line 3790 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
crypt()
; return 0; }
EOF
-if { (eval echo configure:3743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3801: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_crypt="-l$i"
break
fi
echo $ac_n "checking for inflate in -lz""... $ac_c" 1>&6
-echo "configure:3764: checking for inflate in -lz" >&5
+echo "configure:3822: checking for inflate in -lz" >&5
ac_lib_var=`echo z'_'inflate | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lz $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3772 "configure"
+#line 3830 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
inflate()
; return 0; }
EOF
-if { (eval echo configure:3783: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3841: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_krb4" = yes ; then
echo $ac_n "checking for des_encrypt in -ldes""... $ac_c" 1>&6
-echo "configure:3813: checking for des_encrypt in -ldes" >&5
+echo "configure:3871: checking for des_encrypt in -ldes" >&5
ac_lib_var=`echo des'_'des_encrypt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldes $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3821 "configure"
+#line 3879 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
des_encrypt()
; return 0; }
EOF
-if { (eval echo configure:3832: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for krb_sendauth in -lkrb""... $ac_c" 1>&6
-echo "configure:3861: checking for krb_sendauth in -lkrb" >&5
+echo "configure:3919: checking for krb_sendauth in -lkrb" >&5
ac_lib_var=`echo krb'_'krb_sendauth | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lkrb $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3869 "configure"
+#line 3927 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
krb_sendauth()
; return 0; }
EOF
-if { (eval echo configure:3880: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3938: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_krb5" = yes ; then
echo $ac_n "checking for main in -lcom_err""... $ac_c" 1>&6
-echo "configure:3912: checking for main in -lcom_err" >&5
+echo "configure:3970: checking for main in -lcom_err" >&5
ac_lib_var=`echo com_err'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcom_err $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3920 "configure"
+#line 3978 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3985: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lcrypto""... $ac_c" 1>&6
-echo "configure:3956: checking for main in -lcrypto" >&5
+echo "configure:4014: checking for main in -lcrypto" >&5
ac_lib_var=`echo crypto'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcrypto $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3964 "configure"
+#line 4022 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:3971: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4029: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for main in -lkrb5""... $ac_c" 1>&6
-echo "configure:4000: checking for main in -lkrb5" >&5
+echo "configure:4058: checking for main in -lkrb5" >&5
ac_lib_var=`echo krb5'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lkrb5 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4008 "configure"
+#line 4066 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:4015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_openssl" = yes ; then
echo $ac_n "checking for CRYPTO_new_ex_data in -lcrypto""... $ac_c" 1>&6
-echo "configure:4047: checking for CRYPTO_new_ex_data in -lcrypto" >&5
+echo "configure:4105: checking for CRYPTO_new_ex_data in -lcrypto" >&5
ac_lib_var=`echo crypto'_'CRYPTO_new_ex_data | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcrypto $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4055 "configure"
+#line 4113 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
CRYPTO_new_ex_data()
; return 0; }
EOF
-if { (eval echo configure:4066: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for SSL_library_init in -lssl""... $ac_c" 1>&6
-echo "configure:4095: checking for SSL_library_init in -lssl" >&5
+echo "configure:4153: checking for SSL_library_init in -lssl" >&5
ac_lib_var=`echo ssl'_'SSL_library_init | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lssl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4103 "configure"
+#line 4161 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
SSL_library_init()
; return 0; }
EOF
-if { (eval echo configure:4114: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4172: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4152: checking for $ac_hdr" >&5
+echo "configure:4210: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4157 "configure"
+#line 4215 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4162: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4220: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4193: checking for $ac_hdr" >&5
+echo "configure:4251: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4198 "configure"
+#line 4256 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4203: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4261: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4233: checking for $ac_hdr" >&5
+echo "configure:4291: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4238 "configure"
+#line 4296 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4243: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4301: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$with_krb4" = yes ; then
ac_safe=`echo "krb.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for krb.h""... $ac_c" 1>&6
-echo "configure:4273: checking for krb.h" >&5
+echo "configure:4331: checking for krb.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4278 "configure"
+#line 4336 "configure"
#include "confdefs.h"
#include <krb.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4283: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4341: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$with_krb5" = yes ; then
ac_safe=`echo "krb5.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for krb5.h""... $ac_c" 1>&6
-echo "configure:4310: checking for krb5.h" >&5
+echo "configure:4368: checking for krb5.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4315 "configure"
+#line 4373 "configure"
#include "confdefs.h"
#include <krb5.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4320: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4378: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "com_err.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for com_err.h""... $ac_c" 1>&6
-echo "configure:4344: checking for com_err.h" >&5
+echo "configure:4402: checking for com_err.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4349 "configure"
+#line 4407 "configure"
#include "confdefs.h"
#include <com_err.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4354: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4412: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test "$with_openssl" = yes ; then
ac_safe=`echo "openssl/ssl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for openssl/ssl.h""... $ac_c" 1>&6
-echo "configure:4381: checking for openssl/ssl.h" >&5
+echo "configure:4439: checking for openssl/ssl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4386 "configure"
+#line 4444 "configure"
#include "confdefs.h"
#include <openssl/ssl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4391: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4449: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_safe=`echo "openssl/err.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for openssl/err.h""... $ac_c" 1>&6
-echo "configure:4415: checking for openssl/err.h" >&5
+echo "configure:4473: checking for openssl/err.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4420 "configure"
+#line 4478 "configure"
#include "confdefs.h"
#include <openssl/err.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4425: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4483: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
## Types, structures, compiler characteristics
##
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:4454: checking for working const" >&5
+echo "configure:4512: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4459 "configure"
+#line 4517 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:4508: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4566: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:4529: checking for inline" >&5
+echo "configure:4587: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 4536 "configure"
+#line 4594 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:4543: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4601: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:4571: checking for preprocessor stringizing operator" >&5
+echo "configure:4629: checking for preprocessor stringizing operator" >&5
if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4576 "configure"
+#line 4634 "configure"
#include "confdefs.h"
#define x(y) #y
echo "$ac_t""${ac_cv_c_stringize}" 1>&6
echo $ac_n "checking for signed types""... $ac_c" 1>&6
-echo "configure:4606: checking for signed types" >&5
+echo "configure:4664: checking for signed types" >&5
if eval "test \"`echo '$''{'pgac_cv_c_signed'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4611 "configure"
+#line 4669 "configure"
#include "confdefs.h"
int main() {
signed char c; signed short s; signed int i;
; return 0; }
EOF
-if { (eval echo configure:4618: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4676: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
pgac_cv_c_signed=yes
else
fi
echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:4638: checking for volatile" >&5
+echo "configure:4696: checking for volatile" >&5
if eval "test \"`echo '$''{'pgac_cv_c_volatile'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4643 "configure"
+#line 4701 "configure"
#include "confdefs.h"
int main() {
extern volatile int i;
; return 0; }
EOF
-if { (eval echo configure:4650: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4708: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
pgac_cv_c_volatile=yes
else
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:4670: checking whether struct tm is in sys/time.h or time.h" >&5
+echo "configure:4728: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4675 "configure"
+#line 4733 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
-if { (eval echo configure:4683: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4741: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
fi
echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6
-echo "configure:4704: checking for tm_zone in struct tm" >&5
+echo "configure:4762: checking for tm_zone in struct tm" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4709 "configure"
+#line 4767 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_cv_struct_tm>
struct tm tm; tm.tm_zone;
; return 0; }
EOF
-if { (eval echo configure:4717: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4775: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm_zone=yes
else
else
echo $ac_n "checking for tzname""... $ac_c" 1>&6
-echo "configure:4737: checking for tzname" >&5
+echo "configure:4795: checking for tzname" >&5
if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4742 "configure"
+#line 4800 "configure"
#include "confdefs.h"
#include <time.h>
#ifndef tzname /* For SGI. */
atoi(*tzname);
; return 0; }
EOF
-if { (eval echo configure:4752: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_var_tzname=yes
else
fi
echo $ac_n "checking for union semun""... $ac_c" 1>&6
-echo "configure:4774: checking for union semun" >&5
+echo "configure:4832: checking for union semun" >&5
if eval "test \"`echo '$''{'pgac_cv_union_semun'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4779 "configure"
+#line 4837 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/ipc.h>
union semun semun;
; return 0; }
EOF
-if { (eval echo configure:4788: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4846: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
pgac_cv_union_semun=yes
else
## Functions, global variables
##
echo $ac_n "checking for int timezone""... $ac_c" 1>&6
-echo "configure:4813: checking for int timezone" >&5
+echo "configure:4871: checking for int timezone" >&5
if eval "test \"`echo '$''{'pgac_cv_var_int_timezone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4818 "configure"
+#line 4876 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
int res = timezone / 60;
; return 0; }
EOF
-if { (eval echo configure:4825: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4883: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
pgac_cv_var_int_timezone=yes
else
fi
echo $ac_n "checking types of arguments for accept()""... $ac_c" 1>&6
-echo "configure:4845: checking types of arguments for accept()" >&5
+echo "configure:4903: checking types of arguments for accept()" >&5
if eval "test \"`echo '$''{'ac_cv_func_accept_arg1'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_cv_func_accept_arg2 in 'struct sockaddr *' 'const struct sockaddr *' 'void *'; do
for ac_cv_func_accept_arg3 in 'int' 'size_t' 'socklen_t' 'unsigned int'; do
cat > conftest.$ac_ext <<EOF
-#line 4859 "configure"
+#line 4917 "configure"
#include "confdefs.h"
#ifdef HAVE_SYS_TYPES_H
#include <sys/types.h>
; return 0; }
EOF
-if { (eval echo configure:4872: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4930: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_not_found=no; break 3
else
echo $ac_n "checking whether gettimeofday takes only one argument""... $ac_c" 1>&6
-echo "configure:4909: checking whether gettimeofday takes only one argument" >&5
+echo "configure:4967: checking whether gettimeofday takes only one argument" >&5
if eval "test \"`echo '$''{'pgac_cv_func_gettimeofday_1arg'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4914 "configure"
+#line 4972 "configure"
#include "confdefs.h"
#include <sys/time.h>
int main() {
gettimeofday(tp,tzp);
; return 0; }
EOF
-if { (eval echo configure:4923: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4981: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
pgac_cv_func_gettimeofday_1arg=no
else
fi
echo $ac_n "checking for fcntl(F_SETLK)""... $ac_c" 1>&6
-echo "configure:4944: checking for fcntl(F_SETLK)" >&5
+echo "configure:5002: checking for fcntl(F_SETLK)" >&5
case $host_os in
linux*) echo "$ac_t""broken on Linux" 1>&6 ;;
*)
cat > conftest.$ac_ext <<EOF
-#line 4949 "configure"
+#line 5007 "configure"
#include "confdefs.h"
#include <stdio.h>
#include <fcntl.h>
fcntl(0, F_SETLK, &lck);
; return 0; }
EOF
-if { (eval echo configure:4961: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5019: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_FCNTL_SETLK 1
for ac_func in fcvt getopt_long memmove pstat setproctitle setsid sigprocmask sysconf waitpid
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4980: checking for $ac_func" >&5
+echo "configure:5038: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4985 "configure"
+#line 5043 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5008: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5066: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for PS_STRINGS""... $ac_c" 1>&6
-echo "configure:5034: checking for PS_STRINGS" >&5
+echo "configure:5092: checking for PS_STRINGS" >&5
if eval "test \"`echo '$''{'pgac_cv_var_PS_STRINGS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5039 "configure"
+#line 5097 "configure"
#include "confdefs.h"
#include <machine/vmparam.h>
#include <sys/exec.h>
PS_STRINGS->ps_argvstr = "foo";
; return 0; }
EOF
-if { (eval echo configure:5049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5107: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
pgac_cv_var_PS_STRINGS=yes
else
SNPRINTF=''
echo $ac_n "checking for snprintf""... $ac_c" 1>&6
-echo "configure:5071: checking for snprintf" >&5
+echo "configure:5129: checking for snprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_snprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5076 "configure"
+#line 5134 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char snprintf(); below. */
; return 0; }
EOF
-if { (eval echo configure:5099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_snprintf=yes"
else
fi
echo $ac_n "checking for vsnprintf""... $ac_c" 1>&6
-echo "configure:5123: checking for vsnprintf" >&5
+echo "configure:5181: checking for vsnprintf" >&5
if eval "test \"`echo '$''{'ac_cv_func_vsnprintf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5128 "configure"
+#line 5186 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vsnprintf(); below. */
; return 0; }
EOF
-if { (eval echo configure:5151: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5209: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vsnprintf=yes"
else
cat > conftest.$ac_ext <<EOF
-#line 5176 "configure"
+#line 5234 "configure"
#include "confdefs.h"
#include <stdio.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 5191 "configure"
+#line 5249 "configure"
#include "confdefs.h"
#include <stdio.h>
EOF
# do this one the hard way in case isinf() is a macro
echo $ac_n "checking for isinf""... $ac_c" 1>&6
-echo "configure:5208: checking for isinf" >&5
+echo "configure:5266: checking for isinf" >&5
if eval "test \"`echo '$''{'ac_cv_func_isinf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5213 "configure"
+#line 5271 "configure"
#include "confdefs.h"
#include <math.h>
double x = 0.0; int res = isinf(x);
; return 0; }
EOF
-if { (eval echo configure:5221: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5279: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_isinf=yes
else
for ac_func in fpclass fp_class fp_class_d class
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5247: checking for $ac_func" >&5
+echo "configure:5305: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5252 "configure"
+#line 5310 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5333: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking for getrusage""... $ac_c" 1>&6
-echo "configure:5303: checking for getrusage" >&5
+echo "configure:5361: checking for getrusage" >&5
if eval "test \"`echo '$''{'ac_cv_func_getrusage'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5308 "configure"
+#line 5366 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char getrusage(); below. */
; return 0; }
EOF
-if { (eval echo configure:5331: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5389: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_getrusage=yes"
else
echo $ac_n "checking for srandom""... $ac_c" 1>&6
-echo "configure:5356: checking for srandom" >&5
+echo "configure:5414: checking for srandom" >&5
if eval "test \"`echo '$''{'ac_cv_func_srandom'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5361 "configure"
+#line 5419 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char srandom(); below. */
; return 0; }
EOF
-if { (eval echo configure:5384: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_srandom=yes"
else
echo $ac_n "checking for gethostname""... $ac_c" 1>&6
-echo "configure:5409: checking for gethostname" >&5
+echo "configure:5467: checking for gethostname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5414 "configure"
+#line 5472 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostname(); below. */
; return 0; }
EOF
-if { (eval echo configure:5437: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5495: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostname=yes"
else
echo $ac_n "checking for random""... $ac_c" 1>&6
-echo "configure:5462: checking for random" >&5
+echo "configure:5520: checking for random" >&5
if eval "test \"`echo '$''{'ac_cv_func_random'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5467 "configure"
+#line 5525 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char random(); below. */
; return 0; }
EOF
-if { (eval echo configure:5490: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5548: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_random=yes"
else
echo $ac_n "checking for inet_aton""... $ac_c" 1>&6
-echo "configure:5515: checking for inet_aton" >&5
+echo "configure:5573: checking for inet_aton" >&5
if eval "test \"`echo '$''{'ac_cv_func_inet_aton'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5520 "configure"
+#line 5578 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char inet_aton(); below. */
; return 0; }
EOF
-if { (eval echo configure:5543: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_inet_aton=yes"
else
echo $ac_n "checking for strerror""... $ac_c" 1>&6
-echo "configure:5568: checking for strerror" >&5
+echo "configure:5626: checking for strerror" >&5
if eval "test \"`echo '$''{'ac_cv_func_strerror'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5573 "configure"
+#line 5631 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char strerror(); below. */
; return 0; }
EOF
-if { (eval echo configure:5596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_strerror=yes"
else
echo $ac_n "checking for strdup""... $ac_c" 1>&6
-echo "configure:5622: checking for strdup" >&5
+echo "configure:5680: checking for strdup" >&5
if eval "test \"`echo '$''{'ac_cv_func_strdup'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5627 "configure"
+#line 5685 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char strdup(); below. */
; return 0; }
EOF
-if { (eval echo configure:5650: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5708: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_strdup=yes"
else
echo $ac_n "checking for strtol""... $ac_c" 1>&6
-echo "configure:5675: checking for strtol" >&5
+echo "configure:5733: checking for strtol" >&5
if eval "test \"`echo '$''{'ac_cv_func_strtol'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5680 "configure"
+#line 5738 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char strtol(); below. */
; return 0; }
EOF
-if { (eval echo configure:5703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5761: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_strtol=yes"
else
echo $ac_n "checking for strtoul""... $ac_c" 1>&6
-echo "configure:5728: checking for strtoul" >&5
+echo "configure:5786: checking for strtoul" >&5
if eval "test \"`echo '$''{'ac_cv_func_strtoul'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5733 "configure"
+#line 5791 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char strtoul(); below. */
; return 0; }
EOF
-if { (eval echo configure:5756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5814: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_strtoul=yes"
else
echo $ac_n "checking for strcasecmp""... $ac_c" 1>&6
-echo "configure:5781: checking for strcasecmp" >&5
+echo "configure:5839: checking for strcasecmp" >&5
if eval "test \"`echo '$''{'ac_cv_func_strcasecmp'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5786 "configure"
+#line 5844 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char strcasecmp(); below. */
; return 0; }
EOF
-if { (eval echo configure:5809: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5867: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_strcasecmp=yes"
else
echo $ac_n "checking for cbrt""... $ac_c" 1>&6
-echo "configure:5834: checking for cbrt" >&5
+echo "configure:5892: checking for cbrt" >&5
if eval "test \"`echo '$''{'ac_cv_func_cbrt'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5839 "configure"
+#line 5897 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char cbrt(); below. */
; return 0; }
EOF
-if { (eval echo configure:5862: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5920: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_cbrt=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for cbrt in -lm""... $ac_c" 1>&6
-echo "configure:5883: checking for cbrt in -lm" >&5
+echo "configure:5941: checking for cbrt in -lm" >&5
ac_lib_var=`echo m'_'cbrt | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5891 "configure"
+#line 5949 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
cbrt()
; return 0; }
EOF
-if { (eval echo configure:5902: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5960: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for rint""... $ac_c" 1>&6
-echo "configure:5940: checking for rint" >&5
+echo "configure:5998: checking for rint" >&5
if eval "test \"`echo '$''{'ac_cv_func_rint'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5945 "configure"
+#line 6003 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char rint(); below. */
; return 0; }
EOF
-if { (eval echo configure:5968: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6026: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_rint=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for rint in -lm""... $ac_c" 1>&6
-echo "configure:5989: checking for rint in -lm" >&5
+echo "configure:6047: checking for rint in -lm" >&5
ac_lib_var=`echo m'_'rint | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $HPUXMATHLIB $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5997 "configure"
+#line 6055 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
rint()
; return 0; }
EOF
-if { (eval echo configure:6008: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6066: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
cat > conftest.$ac_ext <<EOF
-#line 6035 "configure"
+#line 6093 "configure"
#include "confdefs.h"
#include <readline.h>
EOF
else
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 6049 "configure"
+#line 6107 "configure"
#include "confdefs.h"
#include <readline/readline.h>
EOF
for ac_func in filename_completion_function
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6071: checking for $ac_func" >&5
+echo "configure:6129: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6076 "configure"
+#line 6134 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
#define $ac_tr_func 1
EOF
cat > conftest.$ac_ext <<EOF
-#line 6118 "configure"
+#line 6176 "configure"
#include "confdefs.h"
#include <readline.h>
EOF
else
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 6132 "configure"
+#line 6190 "configure"
#include "confdefs.h"
#include <readline/readline.h>
EOF
echo $ac_n "checking for finite""... $ac_c" 1>&6
-echo "configure:6160: checking for finite" >&5
+echo "configure:6218: checking for finite" >&5
cat > conftest.$ac_ext <<EOF
-#line 6162 "configure"
+#line 6220 "configure"
#include "confdefs.h"
#include <math.h>
int main() {
int dummy=finite(1.0);
; return 0; }
EOF
-if { (eval echo configure:6169: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6227: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_FINITE 1
rm -f conftest*
echo $ac_n "checking for sigsetjmp""... $ac_c" 1>&6
-echo "configure:6184: checking for sigsetjmp" >&5
+echo "configure:6242: checking for sigsetjmp" >&5
cat > conftest.$ac_ext <<EOF
-#line 6186 "configure"
+#line 6244 "configure"
#include "confdefs.h"
#include <setjmp.h>
int main() {
sigjmp_buf x; sigsetjmp(x, 1);
; return 0; }
EOF
-if { (eval echo configure:6193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6251: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_SIGSETJMP 1
case $enable_syslog in
yes)
echo $ac_n "checking for syslog""... $ac_c" 1>&6
-echo "configure:6213: checking for syslog" >&5
+echo "configure:6271: checking for syslog" >&5
if eval "test \"`echo '$''{'ac_cv_func_syslog'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6218 "configure"
+#line 6276 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char syslog(); below. */
; return 0; }
EOF
-if { (eval echo configure:6241: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6299: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_syslog=yes"
else
echo $ac_n "checking whether long int is 64 bits""... $ac_c" 1>&6
-echo "configure:6281: checking whether long int is 64 bits" >&5
+echo "configure:6339: checking whether long int is 64 bits" >&5
if eval "test \"`echo '$''{'pgac_cv_type_long_int_64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "configure: warning: 64 bit arithmetic disabled when cross-compiling" 1>&2
else
cat > conftest.$ac_ext <<EOF
-#line 6290 "configure"
+#line 6348 "configure"
#include "confdefs.h"
typedef long int int64;
exit(! does_int64_work());
}
EOF
-if { (eval echo configure:6319: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6377: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
pgac_cv_type_long_int_64=yes
else
if test x"$HAVE_LONG_INT_64" = x"no" ; then
echo $ac_n "checking whether long long int is 64 bits""... $ac_c" 1>&6
-echo "configure:6346: checking whether long long int is 64 bits" >&5
+echo "configure:6404: checking whether long long int is 64 bits" >&5
if eval "test \"`echo '$''{'pgac_cv_type_long_long_int_64'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "configure: warning: 64 bit arithmetic disabled when cross-compiling" 1>&2
else
cat > conftest.$ac_ext <<EOF
-#line 6355 "configure"
+#line 6413 "configure"
#include "confdefs.h"
typedef long long int int64;
exit(! does_int64_work());
}
EOF
-if { (eval echo configure:6384: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
pgac_cv_type_long_long_int_64=yes
else
if [ x"$HAVE_LONG_LONG_INT_64" = xyes ] ; then
if [ x$SNPRINTF = x ] ; then
echo $ac_n "checking whether snprintf handles 'long long int' as %lld""... $ac_c" 1>&6
-echo "configure:6415: checking whether snprintf handles 'long long int' as %lld" >&5
+echo "configure:6473: checking whether snprintf handles 'long long int' as %lld" >&5
if test "$cross_compiling" = yes; then
echo "$ac_t""assuming not on target machine" 1>&6
# Force usage of our own snprintf, since we cannot test foreign snprintf
else
cat > conftest.$ac_ext <<EOF
-#line 6424 "configure"
+#line 6482 "configure"
#include "confdefs.h"
#include <stdio.h>
typedef long long int int64;
exit(! does_int64_snprintf_work());
}
EOF
-if { (eval echo configure:6451: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6509: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
echo "$ac_t""yes" 1>&6
INT64_FORMAT='"%lld"'
rm -fr conftest*
echo "$ac_t""no" 1>&6
echo $ac_n "checking whether snprintf handles 'long long int' as %qd""... $ac_c" 1>&6
-echo "configure:6462: checking whether snprintf handles 'long long int' as %qd" >&5
+echo "configure:6520: checking whether snprintf handles 'long long int' as %qd" >&5
if test "$cross_compiling" = yes; then
echo "$ac_t""assuming not on target machine" 1>&6
# Force usage of our own snprintf, since we cannot test foreign snprintf
else
cat > conftest.$ac_ext <<EOF
-#line 6471 "configure"
+#line 6529 "configure"
#include "confdefs.h"
#include <stdio.h>
typedef long long int int64;
exit(! does_int64_snprintf_work());
}
EOF
-if { (eval echo configure:6498: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6556: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
echo "$ac_t""yes" 1>&6
INT64_FORMAT='"%qd"'
echo $ac_n "checking alignment of short""... $ac_c" 1>&6
-echo "configure:6537: checking alignment of short" >&5
+echo "configure:6595: checking alignment of short" >&5
if eval "test \"`echo '$''{'pgac_cv_alignof_short'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
pgac_cv_alignof_short='sizeof(short)'
else
cat > conftest.$ac_ext <<EOF
-#line 6545 "configure"
+#line 6603 "configure"
#include "confdefs.h"
#include <stdio.h>
struct { char filler; short field; } mystruct;
exit(0);
}
EOF
-if { (eval echo configure:6557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6615: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
pgac_cv_alignof_short=`cat conftestval`
else
echo $ac_n "checking alignment of int""... $ac_c" 1>&6
-echo "configure:6577: checking alignment of int" >&5
+echo "configure:6635: checking alignment of int" >&5
if eval "test \"`echo '$''{'pgac_cv_alignof_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
pgac_cv_alignof_int='sizeof(int)'
else
cat > conftest.$ac_ext <<EOF
-#line 6585 "configure"
+#line 6643 "configure"
#include "confdefs.h"
#include <stdio.h>
struct { char filler; int field; } mystruct;
exit(0);
}
EOF
-if { (eval echo configure:6597: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
pgac_cv_alignof_int=`cat conftestval`
else
echo $ac_n "checking alignment of long""... $ac_c" 1>&6
-echo "configure:6617: checking alignment of long" >&5
+echo "configure:6675: checking alignment of long" >&5
if eval "test \"`echo '$''{'pgac_cv_alignof_long'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
pgac_cv_alignof_long='sizeof(long)'
else
cat > conftest.$ac_ext <<EOF
-#line 6625 "configure"
+#line 6683 "configure"
#include "confdefs.h"
#include <stdio.h>
struct { char filler; long field; } mystruct;
exit(0);
}
EOF
-if { (eval echo configure:6637: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6695: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
pgac_cv_alignof_long=`cat conftestval`
else
if [ x"$HAVE_LONG_LONG_INT_64" = xyes ] ; then
echo $ac_n "checking alignment of long long int""... $ac_c" 1>&6
-echo "configure:6658: checking alignment of long long int" >&5
+echo "configure:6716: checking alignment of long long int" >&5
if eval "test \"`echo '$''{'pgac_cv_alignof_long_long_int'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
pgac_cv_alignof_long_long_int='sizeof(long long int)'
else
cat > conftest.$ac_ext <<EOF
-#line 6666 "configure"
+#line 6724 "configure"
#include "confdefs.h"
#include <stdio.h>
struct { char filler; long long int field; } mystruct;
exit(0);
}
EOF
-if { (eval echo configure:6678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6736: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
pgac_cv_alignof_long_long_int=`cat conftestval`
else
fi
echo $ac_n "checking alignment of double""... $ac_c" 1>&6
-echo "configure:6699: checking alignment of double" >&5
+echo "configure:6757: checking alignment of double" >&5
if eval "test \"`echo '$''{'pgac_cv_alignof_double'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
pgac_cv_alignof_double='sizeof(double)'
else
cat > conftest.$ac_ext <<EOF
-#line 6707 "configure"
+#line 6765 "configure"
#include "confdefs.h"
#include <stdio.h>
struct { char filler; double field; } mystruct;
exit(0);
}
EOF
-if { (eval echo configure:6719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6777: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
pgac_cv_alignof_double=`cat conftestval`
else
echo $ac_n "checking for POSIX signal interface""... $ac_c" 1>&6
-echo "configure:6757: checking for POSIX signal interface" >&5
+echo "configure:6815: checking for POSIX signal interface" >&5
if eval "test \"`echo '$''{'pgac_cv_func_posix_signals'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6762 "configure"
+#line 6820 "configure"
#include "confdefs.h"
#include <signal.h>
sigaction(0, &act, &oact);
; return 0; }
EOF
-if { (eval echo configure:6773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
pgac_cv_func_posix_signals=yes
else
-
-if test -z "$TCL_DIRS"
-then
- # Extract the first word of "tclsh", so it can be a program name with args.
-set dummy tclsh; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6802: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_TCLSH'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$TCLSH" in
- /*)
- ac_cv_path_TCLSH="$TCLSH" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_TCLSH="$TCLSH" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_TCLSH="$ac_dir/$ac_word"
- break
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-fi
-TCLSH="$ac_cv_path_TCLSH"
-if test -n "$TCLSH"; then
- echo "$ac_t""$TCLSH" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test -z "$TCLSH"
- then
- # Extract the first word of "tcl", so it can be a program name with args.
-set dummy tcl; ac_word=$2
+# Check for Tcl configuration script tclConfig.sh
+if test "$with_tcl" = yes; then
+ for ac_prog in tclsh tcl
+do
+# Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6839: checking for $ac_word" >&5
+echo "configure:6861: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_TCLSH'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
- if test -z "$TCLSH"
- then
- echo "configure: warning: TCL/TK support disabled; tcl shell is not in your path" 1>&2
- USE_TCL=
- fi
- fi
-fi
-
-if test "$USE_TCL" = true
-then
- echo $ac_n "checking for tclConfig.sh""... $ac_c" 1>&6
-echo "configure:6882: checking for tclConfig.sh" >&5
- TCL_CONFIG_SH=
- library_dirs=
- if test -z "$TCL_DIRS"
- then
- library_dirs=`echo 'puts $auto_path' | $TCLSH`
- fi
- library_dirs="$TCL_DIRS $TK_DIRS $library_dirs"
- for dir in $library_dirs; do
- if test -d "$dir" -a -r "$dir/tclConfig.sh"; then
- TCL_CONFIG_SH=$dir/tclConfig.sh
- break
- fi
- done
- if test -z "$TCL_CONFIG_SH"; then
- echo "$ac_t""no" 1>&6
- echo "configure: warning: TCL/TK support disabled; Tcl configuration script missing" 1>&2
- USE_TCL=
- else
- echo "$ac_t""$TCL_CONFIG_SH" 1>&6
-
- fi
-fi
+test -n "$TCLSH" && break
+done
-USE_TK=$USE_TCL # If TCL is disabled, disable TK
+echo $ac_n "checking for tclConfig.sh""... $ac_c" 1>&6
+echo "configure:6897: checking for tclConfig.sh" >&5
+# Let user override test
+if test -z "$TCL_CONFIG_SH"; then
+ pgac_test_dirs="$with_tclconfig"
-if test "$USE_TK" = true
-then
- echo $ac_n "checking for tkConfig.sh""... $ac_c" 1>&6
-echo "configure:6911: checking for tkConfig.sh" >&5
- TK_CONFIG_SH=
- # library_dirs are set in the check for TCL
- for dir in $library_dirs
- do
- if test -d "$dir" -a -r "$dir/tkConfig.sh"
- then
- TK_CONFIG_SH=$dir/tkConfig.sh
- break
- fi
- done
- if test -z "$TK_CONFIG_SH"
- then
- echo "$ac_t""no" 1>&6
- echo "configure: warning: TK support disabled; Tk configuration script missing" 1>&2
- USE_TK=
- else
- echo "$ac_t""$TK_CONFIG_SH" 1>&6
-
- # Extract the first word of "wish", so it can be a program name with args.
-set dummy wish; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6933: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_path_WISH'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- case "$WISH" in
- /*)
- ac_cv_path_WISH="$WISH" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_WISH="$WISH" # Let the user override the test with a dos path.
- ;;
- *)
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_path_WISH="$ac_dir/$ac_word"
- break
+ set X $pgac_test_dirs; shift
+ if test $# -eq 0; then
+ test -z "$TCLSH" && { echo "configure: error: unable to locate tclConfig.sh because no Tcl shell was found" 1>&2; exit 1; }
+ set X `echo 'puts $auto_path' | $TCLSH`; shift
fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac
-fi
-WISH="$ac_cv_path_WISH"
-if test -n "$WISH"; then
- echo "$ac_t""$WISH" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
- fi
+ for pgac_dir; do
+ if test -r "$pgac_dir/tclConfig.sh"; then
+ TCL_CONFIG_SH=$pgac_dir/tclConfig.sh
+ break
+ fi
+ done
fi
+if test -z "$TCL_CONFIG_SH"; then
+ echo "$ac_t""no" 1>&6
+ { echo "configure: error: file \`tclConfig.sh' is required for Tcl" 1>&2; exit 1; }
+else
+ echo "$ac_t""$TCL_CONFIG_SH" 1>&6
+fi
-USE_X=$USE_TK
-if test "$USE_X" = true; then
+fi
- ice_save_LIBS="$LIBS"
- ice_save_CFLAGS="$CFLAGS"
- ice_save_CPPFLAGS="$CPPFLAGS"
- ice_save_LDFLAGS="$LDFLAGS"
+# Check for Tk configuration script tkConfig.sh
+if test "$with_tk" = yes; then
+ echo $ac_n "checking for tkConfig.sh""... $ac_c" 1>&6
+echo "configure:6930: checking for tkConfig.sh" >&5
+# Let user override test
+if test -z "$TK_CONFIG_SH"; then
+ pgac_test_dirs="$with_tkconfig $with_tclconfig"
- # If we find X, set shell vars x_includes and x_libraries to the
-# paths, otherwise set no_x=yes.
-# Uses ac_ vars as temps to allow command line to override cache and checks.
-# --without-x overrides everything else, but does not touch the cache.
-echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:6984: checking for X" >&5
+ set X $pgac_test_dirs; shift
+ if test $# -eq 0; then
+ test -z "$TCLSH" && { echo "configure: error: unable to locate tkConfig.sh because no Tcl shell was found" 1>&2; exit 1; }
+ set X `echo 'puts $auto_path' | $TCLSH`; shift
+ fi
-# Check whether --with-x or --without-x was given.
-if test "${with_x+set}" = set; then
- withval="$with_x"
- :
+ for pgac_dir; do
+ if test -r "$pgac_dir/tkConfig.sh"; then
+ TK_CONFIG_SH=$pgac_dir/tkConfig.sh
+ break
+ fi
+ done
fi
-# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
-if test "x$with_x" = xno; then
- # The user explicitly disabled X.
- have_x=disabled
-else
- if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
- # Both variables are already set.
- have_x=yes
- else
-if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
+if test -z "$TK_CONFIG_SH"; then
+ echo "$ac_t""no" 1>&6
+ { echo "configure: error: file \`tkConfig.sh' is required for Tk" 1>&2; exit 1; }
else
- # One or both of the vars are not set, and there is no cached value.
-ac_x_includes=NO ac_x_libraries=NO
-rm -fr conftestdir
-if mkdir conftestdir; then
- cd conftestdir
- # Make sure to not put "make" in the Imakefile rules, since we grep it out.
- cat > Imakefile <<'EOF'
-acfindx:
- @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
-EOF
- if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
- eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
- # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
- for ac_extension in a so sl; do
- if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
- test -f $ac_im_libdir/libX11.$ac_extension; then
- ac_im_usrlibdir=$ac_im_libdir; break
- fi
- done
- # Screen out bogus values from the imake configuration. They are
- # bogus both because they are the default anyway, and because
- # using them would break gcc on systems where it needs fixed includes.
- case "$ac_im_incroot" in
- /usr/include) ;;
- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
- esac
- case "$ac_im_usrlibdir" in
- /usr/lib | /lib) ;;
- *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
- esac
- fi
- cd ..
- rm -fr conftestdir
+ echo "$ac_t""$TK_CONFIG_SH" 1>&6
fi
-if test "$ac_x_includes" = NO; then
- # Guess where to find include files, by looking for this one X11 .h file.
- test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
- # First, try using that file with no special directory specified.
-cat > conftest.$ac_ext <<EOF
-#line 7046 "configure"
-#include "confdefs.h"
-#include <$x_direct_test_include>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- # We can compile using X headers with no special include directory.
-ac_x_includes=
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- # Look for the header file in a standard set of common directories.
-# Check X11 before X11Rn because it is often a symlink to the current release.
- for ac_dir in \
- /usr/X11/include \
- /usr/X11R6/include \
- /usr/X11R5/include \
- /usr/X11R4/include \
- \
- /usr/include/X11 \
- /usr/include/X11R6 \
- /usr/include/X11R5 \
- /usr/include/X11R4 \
- \
- /usr/local/X11/include \
- /usr/local/X11R6/include \
- /usr/local/X11R5/include \
- /usr/local/X11R4/include \
- \
- /usr/local/include/X11 \
- /usr/local/include/X11R6 \
- /usr/local/include/X11R5 \
- /usr/local/include/X11R4 \
- \
- /usr/X386/include \
- /usr/x386/include \
- /usr/XFree86/include/X11 \
- \
- /usr/include \
- /usr/local/include \
- /usr/unsupported/include \
- /usr/athena/include \
- /usr/local/x11r5/include \
- /usr/lpp/Xamples/include \
- \
- /usr/openwin/include \
- /usr/openwin/share/include \
- ; \
- do
- if test -r "$ac_dir/$x_direct_test_include"; then
- ac_x_includes=$ac_dir
- break
- fi
- done
-fi
-rm -f conftest*
-fi # $ac_x_includes = NO
-if test "$ac_x_libraries" = NO; then
- # Check for the libraries.
+fi
- test -z "$x_direct_test_library" && x_direct_test_library=Xt
- test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
- # See if we find them without any special options.
- # Don't add to $LIBS permanently.
- ac_save_LIBS="$LIBS"
- LIBS="-l$x_direct_test_library $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7120 "configure"
-#include "confdefs.h"
+# Finally ready to produce output files ...
-int main() {
-${x_direct_test_function}()
-; return 0; }
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
EOF
-if { (eval echo configure:7127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
-# We can link X programs with no special library path.
-ac_x_libraries=
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
-# First see if replacing the include by lib works.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
- /usr/X11/lib \
- /usr/X11R6/lib \
- /usr/X11R5/lib \
- /usr/X11R4/lib \
- \
- /usr/lib/X11 \
- /usr/lib/X11R6 \
- /usr/lib/X11R5 \
- /usr/lib/X11R4 \
- \
- /usr/local/X11/lib \
- /usr/local/X11R6/lib \
- /usr/local/X11R5/lib \
- /usr/local/X11R4/lib \
- \
- /usr/local/lib/X11 \
- /usr/local/lib/X11R6 \
- /usr/local/lib/X11R5 \
- /usr/local/lib/X11R4 \
- \
- /usr/X386/lib \
- /usr/x386/lib \
- /usr/XFree86/lib/X11 \
- \
- /usr/lib \
- /usr/local/lib \
- /usr/unsupported/lib \
- /usr/athena/lib \
- /usr/local/x11r5/lib \
- /usr/lpp/Xamples/lib \
- /lib/usr/lib/X11 \
- \
- /usr/openwin/lib \
- /usr/openwin/share/lib \
- ; \
-do
- for ac_extension in a so sl; do
- if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
- ac_x_libraries=$ac_dir
- break 2
- fi
- done
-done
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
fi
-rm -f conftest*
-fi # $ac_x_libraries = NO
+rm -f confcache
-if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
- # Didn't find X anywhere. Cache the known absence of X.
- ac_cv_have_x="have_x=no"
-else
- # Record where we found X for the cache.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
-fi
-fi
- fi
- eval "$ac_cv_have_x"
-fi # $with_x != no
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-if test "$have_x" != yes; then
- echo "$ac_t""$have_x" 1>&6
- no_x=yes
-else
- # If each of the values was on the command line, it overrides each guess.
- test "x$x_includes" = xNONE && x_includes=$ac_x_includes
- test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
- # Update the cache value to reflect the command line values.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
- echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
fi
-if test "$no_x" = yes; then
- # Not all programs may use this symbol, but it does not hurt to define it.
- cat >> confdefs.h <<\EOF
-#define X_DISPLAY_MISSING 1
-EOF
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
- X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS=
-else
- if test -n "$x_includes"; then
- X_CFLAGS="$X_CFLAGS -I$x_includes"
- fi
-
- # It would also be nice to do this for all -L options, not just this one.
- if test -n "$x_libraries"; then
- X_LIBS="$X_LIBS -L$x_libraries"
- # For Solaris; some versions of Sun CC require a space after -R and
- # others require no space. Words are not sufficient . . . .
- case "`(uname -sr) 2>/dev/null`" in
- "SunOS 5"*)
- echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:7233: checking whether -R must be followed by a space" >&5
- ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
- cat > conftest.$ac_ext <<EOF
-#line 7236 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:7243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_R_nospace=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_R_nospace=no
-fi
-rm -f conftest*
- if test $ac_R_nospace = yes; then
- echo "$ac_t""no" 1>&6
- X_LIBS="$X_LIBS -R$x_libraries"
- else
- LIBS="$ac_xsave_LIBS -R $x_libraries"
- cat > conftest.$ac_ext <<EOF
-#line 7259 "configure"
-#include "confdefs.h"
-
-int main() {
-
-; return 0; }
-EOF
-if { (eval echo configure:7266: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- ac_R_space=yes
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_R_space=no
-fi
-rm -f conftest*
- if test $ac_R_space = yes; then
- echo "$ac_t""yes" 1>&6
- X_LIBS="$X_LIBS -R $x_libraries"
- else
- echo "$ac_t""neither works" 1>&6
- fi
- fi
- LIBS="$ac_xsave_LIBS"
- esac
- fi
-
- # Check for system-dependent libraries X programs must link with.
- # Do this before checking for the system-independent R6 libraries
- # (-lICE), since we may need -lsocket or whatever for X linking.
-
- if test "$ISC" = yes; then
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet"
- else
- # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X
- # libraries were built with DECnet support. And karl@cs.umb.edu says
- # the Alpha needs dnet_stub (dnet does not exist).
- echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:7298: checking for dnet_ntoa in -ldnet" >&5
-ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ldnet $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7306 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char dnet_ntoa();
-
-int main() {
-dnet_ntoa()
-; return 0; }
-EOF
-if { (eval echo configure:7317: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test $ac_cv_lib_dnet_dnet_ntoa = no; then
- echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:7339: checking for dnet_ntoa in -ldnet_stub" >&5
-ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-ldnet_stub $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7347 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char dnet_ntoa();
-
-int main() {
-dnet_ntoa()
-; return 0; }
-EOF
-if { (eval echo configure:7358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
-else
- echo "$ac_t""no" 1>&6
-fi
-
- fi
-
- # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT,
- # to get the SysV transport functions.
- # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4)
- # needs -lnsl.
- # The nsl library prevents programs from opening the X display
- # on Irix 5.2, according to dickey@clark.net.
- echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:7387: checking for gethostbyname" >&5
-if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 7392 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char gethostbyname(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char gethostbyname();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
-choke me
-#else
-gethostbyname();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:7415: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_gethostbyname=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_gethostbyname=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test $ac_cv_func_gethostbyname = no; then
- echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:7436: checking for gethostbyname in -lnsl" >&5
-ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lnsl $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7444 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char gethostbyname();
-
-int main() {
-gethostbyname()
-; return 0; }
-EOF
-if { (eval echo configure:7455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
-else
- echo "$ac_t""no" 1>&6
-fi
-
- fi
-
- # lieder@skyler.mavd.honeywell.com says without -lsocket,
- # socket/setsockopt and other routines are undefined under SCO ODT
- # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary
- # on later versions), says simon@lia.di.epfl.ch: it contains
- # gethostby* variants that don't use the nameserver (or something).
- # -lsocket must be given before -lnsl if both are needed.
- # We assume that if connect needs -lnsl, so does gethostbyname.
- echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:7485: checking for connect" >&5
-if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 7490 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char connect(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char connect();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_connect) || defined (__stub___connect)
-choke me
-#else
-connect();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:7513: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_connect=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_connect=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test $ac_cv_func_connect = no; then
- echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:7534: checking for connect in -lsocket" >&5
-ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7542 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char connect();
-
-int main() {
-connect()
-; return 0; }
-EOF
-if { (eval echo configure:7553: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
-else
- echo "$ac_t""no" 1>&6
-fi
-
- fi
-
- # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
- echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:7577: checking for remove" >&5
-if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 7582 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char remove(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char remove();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_remove) || defined (__stub___remove)
-choke me
-#else
-remove();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:7605: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_remove=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_remove=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test $ac_cv_func_remove = no; then
- echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:7626: checking for remove in -lposix" >&5
-ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lposix $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7634 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char remove();
-
-int main() {
-remove()
-; return 0; }
-EOF
-if { (eval echo configure:7645: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
-else
- echo "$ac_t""no" 1>&6
-fi
-
- fi
-
- # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
- echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:7669: checking for shmat" >&5
-if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 7674 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char shmat(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char shmat();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_shmat) || defined (__stub___shmat)
-choke me
-#else
-shmat();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:7697: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_shmat=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_shmat=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test $ac_cv_func_shmat = no; then
- echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:7718: checking for shmat in -lipc" >&5
-ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lipc $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7726 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char shmat();
-
-int main() {
-shmat()
-; return 0; }
-EOF
-if { (eval echo configure:7737: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
-else
- echo "$ac_t""no" 1>&6
-fi
-
- fi
- fi
-
- # Check for libraries that X11R6 Xt/Xaw programs need.
- ac_save_LDFLAGS="$LDFLAGS"
- test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries"
- # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
- # check for ICE first), but we must link in the order -lSM -lICE or
- # we get undefined symbols. So assume we have SM if we have ICE.
- # These have to be linked with before -lX11, unlike the other
- # libraries we check for below, so use a different variable.
- # --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
- echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:7770: checking for IceConnectionNumber in -lICE" >&5
-ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lICE $X_EXTRA_LIBS $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7778 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char IceConnectionNumber();
-
-int main() {
-IceConnectionNumber()
-; return 0; }
-EOF
-if { (eval echo configure:7789: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE"
-else
- echo "$ac_t""no" 1>&6
-fi
-
- LDFLAGS="$ac_save_LDFLAGS"
-
-fi
-
-
- LIBS="$LIBS $X_EXTRA_LIBS"
- CFLAGS="$CFLAGS $X_CFLAGS"
- CPPFLAGS="$CPPFLAGS $X_CFLAGS"
- LDFLAGS="$LDFLAGS $X_LIBS"
-
-
- X11_LIBS=""
- echo $ac_n "checking for XOpenDisplay in -lX11""... $ac_c" 1>&6
-echo "configure:7822: checking for XOpenDisplay in -lX11" >&5
-ac_lib_var=`echo X11'_'XOpenDisplay | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lX11 ${X_PRE_LIBS} $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 7830 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char XOpenDisplay();
-
-int main() {
-XOpenDisplay()
-; return 0; }
-EOF
-if { (eval echo configure:7841: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- X11_LIBS="-lX11"
-else
- echo "$ac_t""no" 1>&6
-fi
-
- if test "$X11_LIBS" = ""; then
- echo "configure: warning: The X11 library '-lX11' could not be found,
-so TK support will be disabled. To enable TK support,
-please use the configure options '--x-includes=DIR'
-and '--x-libraries=DIR' to specify the X location.
-See the file 'config.log' for further diagnostics." 1>&2
- USE_TK=
- fi
-
-
-
-
- LIBS="$ice_save_LIBS"
- CFLAGS="$ice_save_CFLAGS"
- CPPFLAGS="$ice_save_CPPFLAGS"
- LDFLAGS="$ice_save_LDFLAGS"
-fi
-
-
-trap '' 1 2 15
-cat > confcache <<\EOF
-# This file is a shell script that caches the results of configure
-# tests run on this system so they can be shared between configure
-# scripts and configure runs. It is not useful on other systems.
-# If it contains results you don't want to keep, you may remove or edit it.
-#
-# By default, configure uses ./config.cache as the cache file,
-# creating it if it does not exist already. You can give configure
-# the --cache-file=FILE option to use a different cache file; that is
-# what configure does when it calls configure scripts in
-# subdirectories, so they share the cache.
-# Giving --cache-file=/dev/null disables caching, for debugging configure.
-# config.status only pays attention to the cache file if you give it the
-# --recheck option to rerun configure.
-#
-EOF
-# The following way of writing the cache mishandles newlines in values,
-# but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
-# Ultrix sh set writes to stderr and can't be redirected directly,
-# and sets the high bit in the cache file unless we assign to the vars.
-(set) 2>&1 |
- case `(ac_space=' '; set | grep ac_space) 2>&1` in
- *ac_space=\ *)
- # `set' does not quote correctly, so add quotes (double-quote substitution
- # turns \\\\ into \\, and sed turns \\ into \).
- sed -n \
- -e "s/'/'\\\\''/g" \
- -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
- ;;
- *)
- # `set' quotes correctly as required by POSIX, so do not add quotes.
- sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
- ;;
- esac >> confcache
-if cmp -s $cache_file confcache; then
- :
-else
- if test -w $cache_file; then
- echo "updating cache $cache_file"
- cat confcache > $cache_file
- else
- echo "not updating unwritable cache $cache_file"
- fi
-fi
-rm -f confcache
-
-trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
-
-test "x$prefix" = xNONE && prefix=$ac_default_prefix
-# Let make expand exec_prefix.
-test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
-
-# Any assignment to VPATH causes Sun make to only execute
-# the first set of double-colon rules, so remove it if not needed.
-# If there is a colon in the path, we need to keep it.
-if test "x$srcdir" = x.; then
- ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
-fi
-
-trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
-
-DEFS=-DHAVE_CONFIG_H
+DEFS=-DHAVE_CONFIG_H
# Without the "./", some shells look in PATH for config.status.
: ${CONFIG_STATUS=./config.status}
s%@DL_LIB@%$DL_LIB%g
s%@autodepend@%$autodepend%g
s%@INCLUDES@%$INCLUDES%g
-s%@USE_TCL@%$USE_TCL%g
-s%@USE_TK@%$USE_TK%g
+s%@with_tcl@%$with_tcl%g
+s%@with_tk@%$with_tk%g
s%@with_perl@%$with_perl%g
s%@PYTHON@%$PYTHON%g
s%@python_version@%$python_version%g
s%@PERL@%$PERL%g
s%@YACC@%$YACC%g
s%@YFLAGS@%$YFLAGS%g
+s%@WISH@%$WISH%g
s%@SNPRINTF@%$SNPRINTF%g
s%@ISINF@%$ISINF%g
s%@GETRUSAGE@%$GETRUSAGE%g
s%@TCLSH@%$TCLSH%g
s%@TCL_CONFIG_SH@%$TCL_CONFIG_SH%g
s%@TK_CONFIG_SH@%$TK_CONFIG_SH%g
-s%@WISH@%$WISH%g
-s%@X_CFLAGS@%$X_CFLAGS%g
-s%@X_PRE_LIBS@%$X_PRE_LIBS%g
-s%@X_LIBS@%$X_LIBS%g
-s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g
-s%@X11_LIBS@%$X11_LIBS%g
CEOF
EOF
EOF
cat >> $CONFIG_STATUS <<\EOF
-echo timestamp > src/include/stamp-h
+echo "timestamp file" > src/include/stamp-h
exit 0
EOF
projects / postgresql / commitdiff