-# Copyright 1999-2015 ImageMagick Studio LLC, a non-profit organization
-# dedicated to making software imaging solutions freely available.
-#
-# You may not use this file except in compliance with the License. You may
-# obtain a copy of the License at
-#
-# http://www.imagemagick.org/script/license.php
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-#
-# Exercise all regression tests:
-#
-# make test
-#
-# Exersise one regression test:
-#
-# make TEST_VERBOSE=1 TEST_FILES=t/filter.t test
-#
-
-use ExtUtils::MakeMaker;
-use Config;
-use File::Spec::Functions qw/catfile catdir devnull catpath splitpath/;
-use Cwd;
-
-sub AutodetectWin32gcc {
- my $wrkdir = getcwd();
- my $devnull = devnull();
-
- my @incdir = ();
- my @libdir = ($wrkdir);
- my @bindir = ();
-
- #try to get configuration info via identify or convert utilities
- my $conf = `identify -list Configure 2>$devnull` || `convert -list Configure 2>$devnull`;
- foreach my $line (split '\n', $conf) {
- if ($line =~ /^Path:\s+(.*)/) {
- my ($vol,$dir,$file) = splitpath($1);
- next unless $dir;
- my $dirpath = catpath( $vol, $dir);
- my (@l,@b,@i) = ( (),(),() );
-
- # try to detect 'lib' dir
- push @l, catfile($dirpath,'lib');
- push @l, catfile($dirpath,'..','lib');
- push @l, catfile($dirpath,'..','..','lib');
- push @l, catfile($dirpath,'..','..','..','lib');
- foreach (@l) { push @libdir, $_ if (-d $_) };
-
- # try to detect 'bin' dir
- push @b, catfile($dirpath);
- push @b, catfile($dirpath,'bin');
- push @b, catfile($dirpath,'..');
- push @b, catfile($dirpath,'..','bin');
- push @b, catfile($dirpath,'..','..');
- push @b, catfile($dirpath,'..','..','bin');
- push @b, catfile($dirpath,'..','..','..');
- push @b, catfile($dirpath,'..','..','..','bin');
- foreach (@b) { push @bindir, $_ if (-e "$_/convert.exe" || -e "$_/identify.exe") };
-
- # try to detect 'include' dir
- push @i, catfile($dirpath,'include');
- push @i, catfile($dirpath,'include','ImageMagick');
- push @i, catfile($dirpath,'..','include');
- push @i, catfile($dirpath,'..','include','ImageMagick');
- push @i, catfile($dirpath,'..','..','include');
- push @i, catfile($dirpath,'..','..','include','ImageMagick');
- push @i, catfile($dirpath,'..','..','..','include');
- push @i, catfile($dirpath,'..','..','..','include','ImageMagick');
- foreach (@i) { push @incdir, $_ if (-e "$_/MagickCore/MagickCore.h") };
- }
- };
-
- foreach my $bin (@bindir) {
- opendir(my $bindir, $bin) or die qq{Cannot opendir $bin: $!};
- my @dlls = map {catfile($bin, $_)} grep /^\S*magick[^\+]\S*?\.dll$/i, readdir $bindir;
- foreach my $d (@dlls) {
- unlink "$wrkdir/libMagickCore.def", "$wrkdir/libMagickCore.a";
- system("pexports \"$d\" >\"$wrkdir/libMagickCore.def\" 2>$devnull");
- open(DEF, "<$wrkdir/libMagickCore.def");
- my @found = grep(/MagickCoreGenesis/, <DEF>); #checking if we have taken the right DLL
- close(DEF);
- next unless(@found);
- print STDERR "Gonna create 'libMagickCore.a' from '$d'\n";
- system("dlltool -D \"$d\" -d \"$wrkdir/libMagickCore.def\" -l \"$wrkdir/libMagickCore.a\" 2>$devnull");
- last if -s "$wrkdir/libMagickCore.a";
- }
- last if -s "$wrkdir/libMagickCore.a";
- }
-
- unless(@incdir && @libdir && @bindir && (-s "$wrkdir/libMagickCore.a")) {
- print STDERR <<EOF
-################################### WARNING! ###################################
-# It seems that you are trying to install Perl::Magick on a MS Windows box with
-# perl + gcc compiler (e.g. strawberry perl), however we cannot find ImageMagick
-# binaries installed on your system.
-#
-# Please check the following prerequisites:
-#
-# 1) You need to have installed ImageMagick Windows binaries from
-# http://www.imagemagick.org/script/binary-releases.php#windows
-#
-# 2) We only support dynamic (DLL) ImageMagick binaries
-# note: it is not possible to mix 32/64-bit binaries of perl and ImageMagick
-#
-# 3) During installation select that you want to install ImageMagick's
-# development files (libraries+headers)
-#
-# 4) You also need to have ImageMagick's directory in your PATH
-# note: we are checking the presence of convert.exe and/or identify.exe tools
-#
-# 5) You might need Visual C++ Redistributable Package installed on your system
-# see instructions on ImageMagick's Binary Release webpage
-#
-# We are gonna continue, but chances for successful build are very low!
-################################################################################
-EOF
- }
-
- my $inc = join ' ', map "-I\"$_\"", @incdir;
- my $lib = join ' ', map "-L\"$_\"", @libdir;
-
- return ($inc, $lib);
-}
-
-sub AutodetectDelegates {
- #try to get configuration info via identify or convert utilities
- my $devnull = devnull();
- my $conf = `identify -list Configure 2>$devnull` || `convert -list Configure 2>$devnull`;
- my @delegates = ();
- foreach my $line (split '\n', $conf) {
- next unless $line =~ /^DELEGATES\s+/;
- (undef, @delegates) = split /\s+/, $line;
- last;
- };
- return @delegates;
-}
-
-# Compute test specification
-my $delegate_tests='t/*.t';
-my @tested_delegates = qw/bzlib djvu fftw fontconfig freetype jpeg jng openjp2 lcms png rsvg tiff x11 xml wmf zlib/;
-my @supported_delegates = AutodetectDelegates();
-# find the intersection of tested and supported delegates
-my %seen_delegates = ();
-$seen_delegates{$_}++ for @supported_delegates;
-foreach my $delegate (@tested_delegates) {
- if ( $seen_delegates{$delegate} ) {
- if ( -d "t/$delegate" ) {
- if ( defined($ENV{'DISPLAY'}) && ($^O ne 'MSWin32') ) {
- if ( defined $ENV{'DISPLAY'} ) {
- $delegate_tests .= " t/$delegate/*.t";
- }
- next;
- }
- $delegate_tests .= " t/$delegate/*.t";
- }
- }
-}
-
-# defaults for LIBS & INC & CCFLAGS params that we later pass to Writemakefile
-my $INC_magick = '-I../ -I.. -DMAGICKCORE_HDRI_ENABLE=1 -DMAGICKCORE_QUANTUM_DEPTH=16 -I"' . $Config{'usrinc'} . '/ImageMagick"';
-my $LIBS_magick = '-L../MagickCore/.libs -lMagickCore-7.Q16HDRI -lperl -lm';
-my $CCFLAGS_magick = "$Config{'ccflags'} -I/usr/include/libxml2 -I/usr/include/libpng16 -pthread -I/usr/include/pango-1.0 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib64/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libdrm -I/usr/include/OpenEXR -fopenmp -g -O2 -Wall -mtune=sandybridge -fexceptions -DMAGICKCORE_HDRI_ENABLE=1 -DMAGICKCORE_QUANTUM_DEPTH=16";
-my $LDFLAGS_magick = "-L../MagickCore/.libs -lMagickCore-7.Q16HDRI $Config{'ldflags'} ";
-my $LDDLFLAGS_magick = "-L../MagickCore/.libs -lMagickCore-7.Q16HDRI $Config{'lddlflags'} ";
-
-if (($^O eq 'MSWin32') && ($Config{cc} =~ /gcc/)) {
- my($Ipaths, $Lpaths) = AutodetectWin32gcc();
-
- #
- # Setup for strawberry perl.
- #
- $INC_magick = "$Ipaths";
- $LIBS_magick = "-lMagickCore-7.Q16HDRI";
- $CCFLAGS_magick = "$Config{'ccflags'}";
- $LDFLAGS_magick = "$Config{'ldflags'} $Lpaths ";
- $LDDLFLAGS_magick = "$Config{'lddlflags'} $Lpaths ";
-}
-
-# See lib/ExtUtils/MakeMaker.pm for details of how to influence
-# the contents of the Makefile that is written.
-WriteMakefile
- (
- # Module description
- 'ABSTRACT' => 'ImageMagick PERL Extension',
-
- # Perl module name is Image::Magick
- 'NAME' => 'Image::Magick',
-
- # Module author
- 'AUTHOR' => 'ImageMagick Studio LLC',
-
- # Module version
- 'VERSION' => '7.00',
-
- # Prerequisite version
- 'PREREQ_PM' => {'parent' => '0'},
-
- # Preprocessor defines
- 'DEFINE' => ' -D_LARGE_FILES=1 -DHAVE_CONFIG_H', # e.g., '-DHAVE_SOMETHING'
-
- # Header search specfication and preprocessor flags
- 'INC' => $INC_magick,
-
- # C compiler
- #'CC' => 'gcc',
-
- # C pre-processor flags (e.g. -I & -D options)
- # 'CPPFLAGS' => "$Config{'cppflags'} -DMAGICKCORE_HDRI_ENABLE=1 -DMAGICKCORE_QUANTUM_DEPTH=16",
-
- # C compiler flags (e.g. -O -g)
- 'CCFLAGS' => $CCFLAGS_magick,
-
- # Linker
- #'LD' => $Config{'ld'} == $Config{'cc'} ? 'gcc' : $Config{'ld'},
-
- # Linker flags for building an executable
- 'LDFLAGS' => $LDFLAGS_magick,
-
- # Linker flags for building a dynamically loadable module
- 'LDDLFLAGS' => $LDDLFLAGS_magick,
-
- # Install PerlMagick binary into ImageMagick bin directory
- 'INSTALLBIN' => '/usr/local/bin',
-
- # Library specification
- 'LIBS' => [ $LIBS_magick ],
-
- # Perl binary name (if a Perl binary is built)
- 'MAP_TARGET' => 'PerlMagick',
-
- # Let CFLAGS drive optimization flags by setting OPTIMIZE to empty
- # 'OPTIMIZE' => '',
-
- # Use same compiler as ImageMagick
- 'PERLMAINCC' => 'g++ -fopenmp',
- 'AR' => 'ar',
- 'LD' => 'g++',
-
- # Set Perl installation prefix to ImageMagick installation prefix
-# 'PREFIX' => '/usr/local',
-
- # Include delegate directories in tests
- test => { TESTS => $delegate_tests},
-
- ($Config{'archname'} =~ /-object$/i ? ('CAPI' => 'TRUE') : ()),
-
- # sane version
- depend => { '$(FIRST_MAKEFILE)' => '$(VERSION_FROM)' }
-);
-
-
-#
-# Substitutions for "makeaperl" section.
-#
-sub MY::makeaperl {
- package MY; # so that "SUPER" works right
- my $inherited = shift->SUPER::makeaperl(@_);
-
- # Stinky ExtUtils::MM_Unix likes to append its own library path to $(CC),
- # prior to any user-specified library path so that an installed library is
- # used rather than the library just built. This substitution function
- # tries to insert our library path first. Also, use the same compiler used
- # to build perlmain.c to link so that a C++ compiler may be used if
- # necessary.
- $inherited =~ s:MAP_LINKCMD\s.*\s*\$\(CC\):MAP_LINKCMD = \$(PERLMAINCC) -L/usr/local/lib: ;
- $inherited;
- }
projects / imagemagick / commitdiff