-Installation instructions for psmisc package
-============================================
+Basic Installation
+==================
-To compile this program you will need ncurses.
+ These are generic installation instructions.
-I built it with this:
- autoconf 2.53
- automake 1.5
- libtool 1.4.2a
- gcc 2.95.4
- make 3.77
- glibc 2.2.5
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
-All on a Debian GNU/Linux system.
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
-To build this, type
- ./configure
- make
+ The file `configure.in' is used to create `configure' by a program
+called `autoconf'. You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
-To install fuser, killall, pstree and their man pagess, type:
- make install
+The simplest way to compile this package is:
-To get pidof, link killall to pidof:
- ln -s killall pidof
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. You can give `configure'
+initial values for variables by setting them in the environment. Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+ CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+ env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory. After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+ By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on. Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+ CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+ If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+ Use and save the results of the tests in FILE instead of
+ `./config.cache'. Set FILE to `/dev/null' to disable caching, for
+ debugging `configure'.
+
+`--help'
+ Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--version'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`configure' also accepts some other, not widely useful, options.
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = intl/Makefile
+CONFIG_CLEAN_FILES =
DIST_SOURCES =
RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
uninstall-info-recursive all-recursive install-data-recursive \
install-exec-recursive installdirs-recursive install-recursive \
uninstall-recursive check-recursive installcheck-recursive
-DIST_COMMON = README ./stamp-h.in ABOUT-NLS AUTHORS COPYING ChangeLog \
- INSTALL Makefile.am Makefile.in NEWS aclocal.m4 config.guess \
- config.h.in config.sub configure configure.in depcomp \
- install-sh ltmain.sh missing mkinstalldirs
+DIST_COMMON = README ././stamp-h.in ./stamp-h.in ABOUT-NLS AUTHORS \
+ COPYING ChangeLog INSTALL Makefile.am Makefile.in NEWS \
+ aclocal.m4 config.guess config.h.in config.sub configure \
+ configure.in depcomp install-sh ltmain.sh missing mkinstalldirs
DIST_SUBDIRS = $(SUBDIRS)
all: config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
distclean-hdr:
-rm -f config.h
-intl/Makefile: $(top_builddir)/config.status $(top_srcdir)/intl/Makefile.in
- cd $(top_builddir) && CONFIG_FILES=$@ CONFIG_HEADERS= CONFIG_LINKS= $(SHELL) ./config.status
uninstall-info-am:
# This directory's subdirectories are mostly independent; you can cd
distdir: $(DISTFILES)
-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
mkdir $(distdir)
- $(mkinstalldirs) $(distdir)/intl $(distdir)/po
+ $(mkinstalldirs) $(distdir)/./. $(distdir)/po
@for file in $(DISTFILES); do \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002 Free Software Foundation, Inc.
-timestamp='2002-03-20'
+timestamp='2002-05-29'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
/usr/sbin/$sysctl 2>/dev/null || echo unknown)`
case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
Motorola:PowerMAX_OS:*:*)
echo powerpc-motorola-powermax
exit 0 ;;
+ Night_Hawk:*:*:PowerMAX_OS)
+ echo powerpc-harris-powermax
+ exit 0 ;;
Night_Hawk:Power_UNIX:*:*)
echo powerpc-harris-powerunix
exit 0 ;;
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
elif /bin/uname -X 2>/dev/null >/dev/null ; then
- UNAME_REL=`(/bin/uname -X|egrep Release|sed -e 's/.*= //')`
- (/bin/uname -X|egrep i80486 >/dev/null) && UNAME_MACHINE=i486
- (/bin/uname -X|egrep '^Machine.*Pentium' >/dev/null) \
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
&& UNAME_MACHINE=i586
- (/bin/uname -X|egrep '^Machine.*Pent ?II' >/dev/null) \
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
&& UNAME_MACHINE=i686
- (/bin/uname -X|egrep '^Machine.*Pentium Pro' >/dev/null) \
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
&& UNAME_MACHINE=i686
echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
else
exit 0 ;;
M68*:*:R3V[567]*:*)
test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;;
- 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0)
+ 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
# 2000, 2001, 2002 Free Software Foundation, Inc.
-timestamp='2002-03-07'
+timestamp='2002-06-21'
# This file is (in principle) common to ALL GNU software.
# The presence of a machine in this file suggests that SOME GNU software
| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
| c4x | clipper \
- | d10v | d30v | dsp16xx \
- | fr30 \
+ | d10v | d30v | dlx | dsp16xx \
+ | fr30 | frv \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| i370 | i860 | i960 | ia64 \
+ | ip2k \
| m32r | m68000 | m68k | m88k | mcore \
- | mips | mips16 | mips64 | mips64el | mips64orion | mips64orionel \
- | mips64vr4100 | mips64vr4100el | mips64vr4300 \
- | mips64vr4300el | mips64vr5000 | mips64vr5000el \
- | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \
- | mipsisa32 | mipsisa64 \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64orion | mips64orionel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipstx39 | mipstx39el \
| mn10200 | mn10300 \
| ns16k | ns32k \
| openrisc | or32 \
| pdp10 | pdp11 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
| pyramid \
- | sh | sh[34] | sh[34]eb | shbe | shle | sh64 \
+ | sh | sh[1234] | sh3e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
| sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \
| strongarm \
| tahoe | thumb | tic80 | tron \
| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
- | arm-* | armbe-* | armle-* | armv*-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* \
| bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c54x-* \
| clipper-* | cydra-* \
- | d10v-* | d30v-* \
+ | d10v-* | d30v-* | dlx-* \
| elxsi-* \
- | f30[01]-* | f700-* | fr30-* | fx80-* \
+ | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| i*86-* | i860-* | i960-* | ia64-* \
+ | ip2k-* \
| m32r-* \
| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
| m88110-* | m88k-* | mcore-* \
- | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \
- | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \
- | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \
- | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipstx39 | mipstx39el \
| none-* | np1-* | ns16k-* | ns32k-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
| pyramid-* \
| romp-* | rs6000-* \
- | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* | sh64-* \
+ | sh-* | sh[1234]-* | sh3e-* | sh[34]eb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \
| sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
| tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \
we32k)
basic_machine=we32k-att
;;
- sh3 | sh4 | sh3eb | sh4eb)
+ sh3 | sh4 | sh3eb | sh4eb | sh[1234]le | sh3ele)
basic_machine=sh-unknown
;;
sh64)
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova*)
+ | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* | -powermax*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
-ptx*)
vendor=sequent
;;
- -vxsim* | -vxworks*)
+ -vxsim* | -vxworks* | -windiss*)
vendor=wrs
;;
-aux*)
fi
-ac_config_files="$ac_config_files Makefile doc/Makefile src/Makefile po/Makefile.in po/Makefile.in m4/Makefile intl/Makefile"
+ac_config_files="$ac_config_files Makefile doc/Makefile src/Makefile po/Makefile.in po/Makefile.in m4/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
"po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
"po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
"m4/Makefile" ) CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;;
- "intl/Makefile" ) CONFIG_FILES="$CONFIG_FILES intl/Makefile" ;;
"default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
"default-2" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-2" ;;
"config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
dnl Checks for Large File System
AC_SYS_LARGEFILE
-AC_OUTPUT(Makefile doc/Makefile src/Makefile po/Makefile.in po/Makefile.in m4/Makefile intl/Makefile)
+AC_OUTPUT(Makefile doc/Makefile src/Makefile po/Makefile.in po/Makefile.in m4/Makefile )
projects / psmisc / commitdiff