ICU-20460 Adding mechanism to build unicore data into dat file.

diff --git a/icu4c/source/configure b/icu4c/source/configure
index 2ae7d6ff2198ca5cddc72826fcbb7b88d530517f..8fbdbe667b6c4b8bc2bcbe1194e2ec9756bc5353 100755 (executable)
--- a/icu4c/source/configure
+++ b/icu4c/source/configure
@@ -9133,6 +9133,7 @@ else
         --seqmode parallel \
         --src_dir "$srcdir/data" \
         --filter_file "$ICU_DATA_FILTER_FILE" \
+        $BUILDTOOL_OPTS \
         > data/rules.mk
     if test "$?" != "0"; then
         as_fn_error $? "Python failed to run; see above error." "$LINENO" 5

diff --git a/icu4c/source/configure.ac b/icu4c/source/configure.ac
index ef3e72fec4896ff7e6ead7c1e25a87c4ad7b87bc..5f8a32e65c29e129cc4f5021c42e373f2cc83a4d 100644 (file)
--- a/icu4c/source/configure.ac
+++ b/icu4c/source/configure.ac
@@ -1397,6 +1397,7 @@ else
         --seqmode parallel \
         --src_dir "$srcdir/data" \
         --filter_file "$ICU_DATA_FILTER_FILE" \
+        $ICU_DATA_BUILDTOOL_OPTS \
         > data/rules.mk
     if test "$?" != "0"; then
         AC_MSG_ERROR(Python failed to run; see above error.)

diff --git a/icu4c/source/data/BUILDRULES.py b/icu4c/source/data/BUILDRULES.py
index bdcd781418bd2257f02e5d92f8b93c48753fc4de..af1da51991efd55e7d8f3f680b1214a6a981c14e 100644 (file)
--- a/icu4c/source/data/BUILDRULES.py
+++ b/icu4c/source/data/BUILDRULES.py
@@ -29,6 +29,7 @@ def generate(config, glob, common_vars):
     requests += generate_brkitr_dictionaries(config, glob, common_vars)
     requests += generate_normalization(config, glob, common_vars)
     requests += generate_coll_ucadata(config, glob, common_vars)
+    requests += generate_full_unicore_data(config, glob, common_vars)
     requests += generate_unames(config, glob, common_vars)
     requests += generate_ulayout(config, glob, common_vars)
     requests += generate_misc(config, glob, common_vars)
@@ -273,7 +274,8 @@ def generate_brkitr_dictionaries(config, glob, common_vars):
 def generate_normalization(config, glob, common_vars):
     # NRM Files
     input_files = [InFile(filename) for filename in glob("in/*.nrm")]
-    input_files.remove(InFile("in/nfc.nrm"))  # nfc.nrm is pre-compiled into C++
+    # nfc.nrm is pre-compiled into C++; see generate_full_unicore_data
+    input_files.remove(InFile("in/nfc.nrm"))
     output_files = [OutFile(v.filename[3:]) for v in input_files]
     return [
         RepeatedExecutionRequest(
@@ -308,6 +310,36 @@ def generate_coll_ucadata(config, glob, common_vars):
     ]
 
 
+def generate_full_unicore_data(config, glob, common_vars):
+    # The core Unicode properties files (pnames.icu, uprops.icu, ucase.icu, ubidi.icu)
+    # are hardcoded in the common DLL and therefore not included in the data package any more.
+    # They are not built by default but need to be built for ICU4J data,
+    # both in the .jar and in the .dat file (if ICU4J uses the .dat file).
+    # See ICU-4497.
+    if not config.include_uni_core_data:
+        return []
+
+    basenames = [
+        "pnames.icu",
+        "uprops.icu",
+        "ucase.icu",
+        "ubidi.icu",
+        "nfc.nrm"
+    ]
+    input_files = [InFile("in/%s" % bn) for bn in basenames]
+    output_files = [OutFile(bn) for bn in basenames]
+    return [
+        RepeatedExecutionRequest(
+            name = "unicore",
+            category = "unicore",
+            input_files = input_files,
+            output_files = output_files,
+            tool = IcuTool("icupkg"),
+            args = "-t{ICUDATA_CHAR} {IN_DIR}/{INPUT_FILE} {OUT_DIR}/{OUTPUT_FILE}"
+        )
+    ]
+
+
 def generate_unames(config, glob, common_vars):
     # Unicode Character Names
     input_file = InFile("in/unames.icu")

diff --git a/icu4c/source/data/Makefile.in b/icu4c/source/data/Makefile.in
index 449c2696e682163bd050baafb9d345b33c8ed62a..43a8e01901ca4ca166e9ab59f7a106b3e39671e0 100644 (file)
--- a/icu4c/source/data/Makefile.in
+++ b/icu4c/source/data/Makefile.in
@@ -82,35 +82,8 @@ endif
 OUTTMPDIR=$(OUTDIR)/tmp
 MAINBUILDDIR=$(OUTDIR)/build
 BUILDDIR=$(MAINBUILDDIR)/$(ICUDATA_PLATFORM_NAME)
-UNICODEDATADIR=$(SRCDATADIR)/unidata
-LOCSRCDIR=$(SRCDATADIR)/locales
-CURRSRCDIR=$(SRCDATADIR)/curr
-CURRBLDDIR=$(BUILDDIR)/curr
-LANGSRCDIR=$(SRCDATADIR)/lang
-LANGBLDDIR=$(BUILDDIR)/lang
-REGIONSRCDIR=$(SRCDATADIR)/region
-REGIONBLDDIR=$(BUILDDIR)/region
-ZONESRCDIR=$(SRCDATADIR)/zone
-ZONEBLDDIR=$(BUILDDIR)/zone
-UNITSRCDIR=$(SRCDATADIR)/unit
-UNITBLDDIR=$(BUILDDIR)/unit
-COLSRCDIR=$(SRCDATADIR)/coll
-COLBLDDIR=$(BUILDDIR)/coll
-RBNFSRCDIR=$(SRCDATADIR)/rbnf
-RBNFBLDDIR=$(BUILDDIR)/rbnf
-TRANSLITSRCDIR=$(SRCDATADIR)/translit
-TRANSLITBLDDIR=$(BUILDDIR)/translit
 MISCSRCDIR=$(SRCDATADIR)/misc
-BRKSRCDIR=$(SRCDATADIR)/brkitr
-BRKBLDDIR=$(BUILDDIR)/brkitr
-DICTSRCDIR=$(BRKSRCDIR)/dictionaries
-BRKRULESRCDIR=$(BRKSRCDIR)/rules
-MISCSRCDIR=$(SRCDATADIR)/misc
-UCMSRCDIR=$(SRCDATADIR)/mappings
-SPREPSRCDIR=$(SRCDATADIR)/sprep
-COMINCDIR=$(top_srcdir)/common/unicode
 SRCLISTDEPS=Makefile $(srcdir)/Makefile.in
-BUILD_DIRS=$(OUTDIR) $(MAINBUILDDIR) $(BUILDDIR) $(CURRBLDDIR) $(LANGBLDDIR) $(REGIONBLDDIR) $(ZONEBLDDIR) $(UNITBLDDIR) $(BRKBLDDIR) $(COLBLDDIR) $(RBNFBLDDIR) $(TRANSLITBLDDIR) $(OUTTMPDIR) $(OUTTMPDIR_390STUB) $(OUTTMPDIR)/$(CURR_TREE) $(OUTTMPDIR)/$(LANG_TREE) $(OUTTMPDIR)/$(REGION_TREE) $(OUTTMPDIR)/$(ZONE_TREE) $(OUTTMPDIR)/$(UNIT_TREE) $(OUTTMPDIR)/$(COLLATION_TREE) $(OUTTMPDIR)/$(RBNF_TREE) $(OUTTMPDIR)/$(TRANSLIT_TREE) $(OUTTMPDIR)/$(BREAK_TREE)
 
 # Variable names for rules.mk
 OUT_DIR=$(BUILDDIR)
@@ -145,7 +118,7 @@ check-exhaustive: check
 distclean-local: clean
        $(RMV) Makefile
 
-all-local: build-dir icupkg.inc build-local packagedata $(POST_DATA_BUILD) $(OS390PKG)
+all-local: icupkg.inc build-local packagedata $(POST_DATA_BUILD) $(OS390PKG)
 
 dist-local:
 
@@ -153,7 +126,7 @@ clean-map:
        -test -z *.map || $(RMV) *.map
 
 clean-local: cleanpackage cleanfiles clean-map
-       $(RMV) build-dir* build-local packagedata uni-core-data
+       $(RMV) $(OUTDIR) build-local packagedata uni-core-data
 
 cleanfiles:
        test -z "$(CLEANFILES)" || $(RMV) $(CLEANFILES)
@@ -252,7 +225,7 @@ include $(top_builddir)/$(subdir)/rules.mk
 ifeq ($(ENABLE_SO_VERSION_DATA),1)
 ifeq ($(PKGDATA_MODE),dll)
 SO_VERSION_DATA = $(OUTTMPDIR)/icudata.res
-$(SO_VERSION_DATA) : $(MISCSRCDIR)/icudata.rc | build-dir
+$(SO_VERSION_DATA) : $(MISCSRCDIR)/icudata.rc
 ifeq ($(MSYS_RC_MODE),1)
        rc.exe -i$(srcdir)/../common -i$(top_builddir)/common -fo$@ $(CPPFLAGS) $<
 else
@@ -264,36 +237,6 @@ endif
 PKGDATA_LIST = $(TMP_DIR)/icudata.lst
 
 
-##### Define all the data files. the build rule that depends on them is below.
-# X_FILES_SHORT = just the base names (for lists)
-# X_FILES = full paths (for dependency)
-
-## DAT files - Misc. data files.
-#  2005-may-05 Removed Unicode properties files (unorm.icu, uprops.icu, ucase.icu, ubidi.icu)
-#  from data build. See Jitterbug 4497. (makedata.mak revision 1.117)
-#  2010-dec Removed pnames.icu.
-# These are now hardcoded in ICU4C and only loaded in ICU4J.
-#
-DAT_FILES_SHORT=unames.icu cnvalias.icu coll/ucadata.icu nfkc.nrm nfkc_cf.nrm uts46.nrm
-DAT_FILES=$(DAT_FILES_SHORT:%=$(BUILDDIR)/%)
-
-## All generated files
-ALL_FILES = $(DAT_FILES) $(CNV_FILES) $(CNV_FILES_SPECIAL) $(BRK_FILES) $(DICT_FILES) $(RES_FILES) $(INDEX_RES_FILE) $(CURR_FILES) $(LANG_FILES) $(REGION_FILES) $(ZONE_FILES) $(UNIT_FILES) $(COLLATION_FILES) $(BRK_RES_FILES) $(RBNF_FILES) $(TRANSLIT_FILES) $(SPREP_FILES) $(CFU_FILES)
-ALL_INDEX_SRC_FILES = $(PKGDATA_LIST) $(INDEX_FILE) $(CURR_INDEX_FILE) $(LANG_INDEX_FILE) $(REGION_INDEX_FILE) $(ZONE_INDEX_FILE) $(UNIT_INDEX_FILE) $(COLLATION_INDEX_FILE) $(BRK_RES_INDEX_FILE) $(RBNF_INDEX_FILE)
-# a list to use in the .lst files (package-relative)
-COLL_FILES_LIST=$(COLLATION_FILES_SHORT) $(COLLATION_INDEX_RES_SHORT)
-BRK_FILES_LIST=$(BRK_FILES_SHORT) $(BRK_RES_FILES_SHORT) $(BRK_RES_INDEX_RES_SHORT) $(DICT_FILES_SHORT)
-LOCALE_FILES_LIST= $(RES_FILES_SHORT) $(LANG_FILES_SHORT) $(REGION_FILES_SHORT) $(ZONE_FILES_SHORT) $(UNIT_FILES_SHORT)
-MISC_FILES_LIST=$(DAT_FILES_SHORT) $(CNV_FILES_SHORT) $(CNV_FILES_SHORT_SPECIAL) $(CURR_FILES_SHORT) $(RBNF_FILES_SHORT) $(RBNF_INDEX_RES_SHORT) $(TRANSLIT_FILES_SHORT) $(SPREP_FILES_SHORT) $(CFU_FILES_SHORT)
-UNI_CORE_DATA=pnames.icu uprops.icu ucase.icu ubidi.icu nfc.nrm
-UNI_CORE_TARGET_DATA=$(UNI_CORE_DATA:%=$(BUILDDIR)/%)
-
-ifneq ($(INCLUDE_UNI_CORE_DATA),)
-MISC_FILES_LIST+=$(UNI_CORE_DATA)
-build-local: uni-core-data
-       echo timestamp > $@
-endif
-
 #####################################################
 # General data build rules
 
@@ -301,10 +244,10 @@ endif
 CLEANFILES = *~ icupkg.inc *.x
 
 ifeq ($(ICUDATA_SOURCE_ARCHIVE),)
-build-local: build-dir $(SO_VERSION_DATA) $(ICUDATA_ALL_OUTPUT_FILES) $(PKGDATA_LIST) $(OS390LIST)
+build-local: $(SO_VERSION_DATA) $(ICUDATA_ALL_OUTPUT_FILES) $(PKGDATA_LIST) $(OS390LIST)
        echo timestamp > $@
 else
-build-local: build-dir $(SO_VERSION_DATA) $(PKGDATA_LIST) $(OS390LIST)
+build-local: $(SO_VERSION_DATA) $(PKGDATA_LIST) $(OS390LIST)
        echo timestamp > $@
 $(PKGDATA_LIST): $(SRCLISTDEPS) $(ICUDATA_SOURCE_ARCHIVE)
 ifneq ($(ICUDATA_SOURCE_IS_NATIVE_TARGET),YES)
@@ -317,32 +260,12 @@ endif
 endif
 
 
-$(BUILD_DIRS): build-dir
-
-build-dir:
-       @-$(RMV) $@
-       echo timestamp > $@.tmp
-       @list='$(BUILD_DIRS)'; \
-       for dir in $$list; do \
-         if ! test -d $$dir; then \
-           echo $(MKINSTALLDIRS) $(BUILD_DIRS); \
-           $(MKINSTALLDIRS) $(BUILD_DIRS); \
-         fi; \
-       done
-       mv $@.tmp $@
-
-# The | is an order-only prerequisite. This helps when the -j option is used,
-# and we don't want the files to be built before the directories are built.
-ifneq ($(filter order-only,$(.FEATURES)),)
-$(ALL_FILES) $(ALL_INDEX_SRC_FILES): | build-dir
-endif
-
 # if the tzcode directory contains a new tzdata*.tar.gz file, use it for zoneinfo
 ifeq ($(TZDATA),)
 TZDATA = $(firstword $(wildcard $(top_builddir)/tools/tzcode/tzdata*.tar.gz) $(wildcard $(top_srcdir)/tools/tzcode/tzdata*.tar.gz))
 endif
 
-# TODO: Make the TZDATA override part of Python buildtool
+# TODO(ICU-20466): Make the TZDATA override part of Python buildtool
 ifneq ($(TZDATA),)
 
 TZCODE_DIR=$(top_builddir)/tools/tzcode
@@ -362,14 +285,6 @@ $(ZONEINFO): $(TZDATA)
 # end of zoneinfo-generation
 endif
 
-# The core Unicode properties files (pnames.icu, uprops.icu, ucase.icu, ubidi.icu)
-# are hardcoded in the common DLL and therefore not included in the data package any more.
-# They are not built by default but need to be built for ICU4J data and for getting the .c source files
-# when updating the Unicode data.
-uni-core-data: build-dir $(UNI_CORE_TARGET_DATA)
-       @echo Unicode .icu files built to $(BUILDDIR)
-       echo timestamp > $@
-
 # Build the ICU4J icudata.jar.
 # Command line:
 #   (Run this from the output data folder which may not be .../source/data in an out-of-source build.)
@@ -385,19 +300,11 @@ ICU4J_TZDATA_FILES=zoneinfo64 metaZones timezoneTypes windowsZones
 ICU4J_DATA_DIRNAME=com/ibm/icu/impl/data/$(ICUDATA_BASENAME_VERSION)b
 ICU4J_TZDATA_PATHS=$(ICU4J_TZDATA_FILES:%="$(ICU4J_DATA_DIRNAME)/%.res")
 
-# Targets for prebuilt Unicode data
-$(BUILDDIR)/%.icu: $(SRCDATADIR)/in/%.icu | $(DIRS)
-       $(INVOKE) $(TOOLBINDIR)/icupkg -t$(ICUDATA_CHAR) $< $@
-
-$(BUILDDIR)/nfc.nrm: $(SRCDATADIR)/in/nfc.nrm | $(DIRS)
-       $(INVOKE) $(TOOLBINDIR)/icupkg -t$(ICUDATA_CHAR) $< $@
-
 # generate icu4j-related data to $(OUTDIR)/icu4j/com/ibm/icu/impl/data/...
-generate-data: build-dir packagedata $(OUTTMPDIR)/$(ICUDATA_PLATFORM_NAME).dat uni-core-data
+generate-data: packagedata $(OUTTMPDIR)/$(ICUDATA_PLATFORM_NAME).dat
        mkdir -p $(OUTDIR)/icu4j/$(ICU4J_DATA_DIRNAME)
        mkdir -p $(OUTDIR)/icu4j/tzdata/$(ICU4J_DATA_DIRNAME)
-       echo $(UNI_CORE_DATA) > $(OUTDIR)/icu4j/add.txt
-       $(INVOKE) $(TOOLBINDIR)/icupkg $(OUTTMPDIR)/$(ICUDATA_PLATFORM_NAME).dat $(OUTDIR)/icu4j/$(ICUDATA_BASENAME_VERSION)b.dat -a $(OUTDIR)/icu4j/add.txt -s $(BUILDDIR) -x '*' -tb -d $(OUTDIR)/icu4j/$(ICU4J_DATA_DIRNAME)
+       $(INVOKE) $(TOOLBINDIR)/icupkg $(OUTTMPDIR)/$(ICUDATA_PLATFORM_NAME).dat $(OUTDIR)/icu4j/$(ICUDATA_BASENAME_VERSION)b.dat -s $(BUILDDIR) -x '*' -tb -d $(OUTDIR)/icu4j/$(ICU4J_DATA_DIRNAME)
        mv $(ICU4J_TZDATA_PATHS:%=$(OUTDIR)/icu4j/%) "$(OUTDIR)/icu4j/tzdata/$(ICU4J_DATA_DIRNAME)"
 
 $(OUTDIR)/icu4j/icutzdata.jar: generate-data
@@ -408,6 +315,7 @@ $(OUTDIR)/icu4j/icutzdata.jar: generate-data
 # - swap the ICU data
 # - extract all data items
 # - package them into the .jar file
+# TODO(ICU-20466): Move this to Python
 $(OUTDIR)/icu4j/icudata.jar: generate-data
        $(JAR) cf $(OUTDIR)/icu4j/icudata.jar -C $(OUTDIR)/icu4j $(ICU4J_DATA_DIRNAME)/
 

diff --git a/icu4c/source/data/buildtool/__main__.py b/icu4c/source/data/buildtool/__main__.py
index 6bc2ef9ac7dec00c0fc34e0a3ccb55b9f24fc6d2..41435330355d564ad1522feefeb9b8b52263393e 100644 (file)
--- a/icu4c/source/data/buildtool/__main__.py
+++ b/icu4c/source/data/buildtool/__main__.py
@@ -84,6 +84,12 @@ flag_parser.add_argument(
     choices = ["unihan", "implicithan"],
     default = "unihan"
 )
+flag_parser.add_argument(
+    "--include_uni_core_data",
+    help = "Include the full Unicode core data in the dat file.",
+    default = False,
+    action = "store_true"
+)
 flag_parser.add_argument(
     "--seqmode",
     help = "Whether to optimize rules to be run sequentially (fewer threads) or in parallel (many threads). Defaults to 'sequential', which is better for unix-exec and windows-exec modes. 'parallel' is often better for massively parallel build systems.",
@@ -119,9 +125,13 @@ class Config(object):
     def __init__(self, args):
         # Process arguments
         self.max_parallel = (args.seqmode == "parallel")
+
         # Either "unihan" or "implicithan"
         self.coll_han_type = args.collation_ucadata
 
+        # Boolean: Whether to include core Unicode data files in the .dat file
+        self.include_uni_core_data = args.include_uni_core_data
+
         # Default fields before processing filter file
         self.filters_json_data = {}
 

diff --git a/icu4c/source/data/icu4j-readme.txt b/icu4c/source/data/icu4j-readme.txt
index 943d722dedf7abbf043c46a825517fb0fb785c7c..00033adcfb3b32aca1df4246ddaa94ac2d07d14f 100644 (file)
--- a/icu4c/source/data/icu4j-readme.txt
+++ b/icu4c/source/data/icu4j-readme.txt
@@ -17,9 +17,15 @@ In the following,
         $icu4j_root is the ICU4J root directory
         $jdk_bin is the JDK bin directory (for the jar tool)
 
-1. Download and build ICU4C. For more instructions on downloading and building
-        ICU4C, see the ICU4C readme at:
-        http://source.icu-project.org/repos/icu/trunk/icu4c/readme.html#HowToBuild
+1. Download, configure, and build ICU4C. When you configure ICU4C, you must
+   set the environment variable ICU_DATA_BUILDTOOL_OPTS to
+   "--include_uni_core_data" to build additional required ICU4J data:
+
+        ICU_DATA_BUILDTOOL_OPTS=--include_uni_core_data ./runConfigureICU Linux
+
+   For more instructions on downloading and building ICU4C,
+   see the ICU4C readme at:
+        https://htmlpreview.github.io/?https://github.com/unicode-org/icu/blob/master/icu4c/readme.html#HowToBuild
         (Windows: build as 'x86, Release' otherwise you will have to set 'CFG' differently below.)
 
     *NOTE* You should do a full rebuild after any data changes.

diff --git a/icu4c/source/data/makedata.mak b/icu4c/source/data/makedata.mak
index f9e85094432d03f78f71ce3e34453303d4a9d1b9..9991d062f69385080566e11b6eb8e1435b9229e0 100644 (file)
--- a/icu4c/source/data/makedata.mak
+++ b/icu4c/source/data/makedata.mak
@@ -240,6 +240,8 @@ $(COREDATA_TS):
                --tool_cfg "$(CFG)" \
                --out_dir "$(ICUBLD_PKG)" \
                --tmp_dir "$(ICUTMP)"
+               --filter_file "$(ICU_DATA_FILTER_FILE)" \
+               $(ICU_DATA_BUILDTOOL_OPTS) \
        @echo "timestamp" > $(COREDATA_TS)