Add support for C++ in Configure

A note: this will form object file names by changing '.cc' to
'_cc.o'.  This will permit other configuration code to recognise these
object files were built for C++ rather than C.

Reviewed-by: Rich Salz <rsalz@openssl.org>

diff --git a/Configurations/README b/Configurations/README
index da64e8c79bf8aa45ed242e907a48af719062e68a..0b82dedca903723a9fa5e9ded5c4a6e8d64be24e 100644 (file)
--- a/Configurations/README
+++ b/Configurations/README
@@ -17,12 +17,20 @@ In each table entry, the following keys are significant:
         sys_id          => System identity for systems where that
                            is difficult to determine automatically.
 
-        cc              => The compiler command, usually one of "cc",
+        cc              => The C compiler command, usually one of "cc",
                            "gcc" or "clang".  This command is normally
                            also used to link object files and
                            libraries into the final program.
+        cxx             => The C++ compiler command, usually one of
+                           "c++", "g++" or "clang++".  This command is
+                           also used when linking a program where at
+                           least one of the object file is made from
+                           C++ source.
         cflags          => Flags that are used at all times when
-                           compiling.
+                           compiling C object files.
+        cxxflags        => Flags that are used at all times when
+                           compiling C++ object files.  If unset, it
+                           gets the same value as cflags.
         defines         => As an alternative, macro definitions may be
                            present here instead of in `cflags'.  If
                            given here, they MUST be as an array of the

diff --git a/Configure b/Configure
index bfb9dbf4dca59a6388fc07d682ff17d1f39927a4..024b93fb3aace58d84688f8fdb3d5fec144d6108 100755 (executable)
--- a/Configure
+++ b/Configure
@@ -222,6 +222,8 @@ if (grep /^reconf(igure)?$/, @argvcopy) {
            if defined($configdata::config{cross_compile_prefix});
        $ENV{CC} = $configdata::config{cc}
            if defined($configdata::config{cc});
+       $ENV{CXX} = $configdata::config{cxx}
+           if defined($configdata::config{cxx});
        $ENV{BUILDFILE} = $configdata::config{build_file}
            if defined($configdata::config{build_file});
        $ENV{$local_config_envname} = $configdata::config{local_config_dir}
@@ -231,6 +233,7 @@ if (grep /^reconf(igure)?$/, @argvcopy) {
        print "    CROSS_COMPILE = ",$ENV{CROSS_COMPILE},"\n"
            if $ENV{CROSS_COMPILE};
        print "    CC = ",$ENV{CC},"\n" if $ENV{CC};
+       print "    CXX = ",$ENV{CXX},"\n" if $ENV{CXX};
        print "    BUILDFILE = ",$ENV{BUILDFILE},"\n" if $ENV{BUILDFILE};
        print "    $local_config_envname = ",$ENV{$local_config_envname},"\n"
            if $ENV{$local_config_envname};
@@ -927,6 +930,7 @@ my %conf_files = map { $_ => 1 } (@{$target{_conf_fname_int}});
 $config{conf_files} = [ sort keys %conf_files ];
 %target = ( %{$table{DEFAULTS}}, %target );
 
+$target{cxxflags}=$target{cflags} unless defined $target{cxxflags};
 $target{exe_extension}="";
 $target{exe_extension}=".exe" if ($config{target} eq "DJGPP"
                                   || $config{target} =~ /^(?:Cygwin|mingw)/);
@@ -962,6 +966,7 @@ $target{build_file} = $ENV{BUILDFILE} || $target{build_file} || "Makefile";
 
 # Cache information necessary for reconfiguration
 $config{cc} = $target{cc};
+$config{cxx} = $target{cxx};
 $config{build_file} = $target{build_file};
 
 # For cflags, lflags, plib_lflags, ex_libs and defines, add the debug_
@@ -969,6 +974,7 @@ $config{build_file} = $target{build_file};
 # Do it in such a way that no spurious space is appended (hence the grep).
 $config{defines} = [];
 $config{cflags} = "";
+$config{cxxflags} = "";
 $config{ex_libs} = "";
 $config{shared_ldflag} = "";
 
@@ -1747,9 +1753,11 @@ EOF
                 if (! -f $s) {
                     $s = cleanfile($buildd, $_, $blddir);
                 }
-                # We recognise C and asm files
-                if ($s =~ /\.[csS]\b$/) {
-                    (my $o = $_) =~ s/\.[csS]\b$/.o/;
+                # We recognise C++, C and asm files
+                if ($s =~ /\.(cc|cpp|c|s|S)$/) {
+                    my $o = $_;
+                    $o =~ s/\.[csS]$/.o/; # C and assembler
+                    $o =~ s/\.(cc|cpp)$/_cc.o/; # C++
                     $o = cleanfile($buildd, $o, $blddir);
                     $unified_info{sources}->{$ddest}->{$o} = 1;
                     $unified_info{sources}->{$o}->{$s} = 1;
@@ -1773,9 +1781,11 @@ EOF
                 if (! -f $s) {
                     $s = cleanfile($buildd, $_, $blddir);
                 }
-                # We recognise C and asm files
-                if ($s =~ /\.[csS]\b$/) {
-                    (my $o = $_) =~ s/\.[csS]\b$/.o/;
+                # We recognise C++, C and asm files
+                if ($s =~ /\.(cc|cpp|c|s|S)$/) {
+                    my $o = $_;
+                    $o =~ s/\.[csS]$/.o/; # C and assembler
+                    $o =~ s/\.(cc|cpp)$/_cc.o/; # C++
                     $o = cleanfile($buildd, $o, $blddir);
                     $unified_info{shared_sources}->{$ddest}->{$o} = 1;
                     $unified_info{sources}->{$o}->{$s} = 1;
@@ -1898,7 +1908,9 @@ EOF
 foreach (grep /_(asm|aux)_src$/, keys %target) {
     my $src = $_;
     (my $obj = $_) =~ s/_(asm|aux)_src$/_obj/;
-    ($target{$obj} = $target{$src}) =~ s/\.[csS]\b/.o/g;
+    $target{$obj} = $target{$src};
+    $target{$obj} =~ s/\.[csS]\b/.o/g; # C and assembler
+    $target{$obj} =~ s/\.(cc|cpp)\b/_cc.o/g; # C++
 }
 
 # Write down our configuration where it fits #########################
@@ -2033,6 +2045,10 @@ print "PERLVERSION   =$Config{version} for $Config{archname}\n";
 print "HASHBANGPERL  =$config{hashbangperl}\n";
 print "CC            =$config{cross_compile_prefix}$target{cc}\n";
 print "CFLAG         =$target{cflags} $config{cflags}\n";
+print "CXX           =$config{cross_compile_prefix}$target{cxx}\n"
+    if defined $target{cxx};
+print "CXXFLAG       =$target{cxxflags} $config{cxxflags}\n"
+    if defined $target{cxx};
 print "DEFINES       =",join(" ", @{$target{defines}}, @{$config{defines}}),"\n";
 #print "RANLIB        =", $target{ranlib} eq '$(CROSS_COMPILE)ranlib' ?
 #                             "$config{cross_compile_prefix}ranlib" :