Notes on the Free Translation Project
*************************************
- Free software is going international! The Free Translation Project
-is a way to get maintainers of free software, translators, and users all
+Free software is going international! The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
together, so that will gradually become able to speak many languages.
A few packages already provide translations for their messages.
Quick configuration advice
==========================
- If you want to exploit the full power of internationalization, you
+If you want to exploit the full power of internationalization, you
should configure it using
./configure --with-included-gettext
INSTALL Matters
===============
- Some packages are "localizable" when properly installed; the
-programs they contain can be made to speak your own native language.
-Most such packages use GNU `gettext'. Other packages have their own
-ways to internationalization, predating GNU `gettext'.
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language. Most such
+packages use GNU `gettext'. Other packages have their own ways to
+internationalization, predating GNU `gettext'.
By default, this package will be installed to allow translation of
messages. It will automatically detect whether the system already
Using This Package
==================
- As a user, if your language has been installed for this package, you
+As a user, if your language has been installed for this package, you
only have to set the `LANG' environment variable to the appropriate
`LL_CC' combination. Here `LL' is an ISO 639 two-letter language code,
and `CC' is an ISO 3166 two-letter country code. For example, let's
read translations in German than English for when Swedish is not
available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+ Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003). During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
In the `LANGUAGE' environment variable, but not in the `LANG'
environment variable, `LL_CC' combinations can be abbreviated as `LL'
to denote the language's main dialect. For example, `de' is equivalent
Translating Teams
=================
- For the Free Translation Project to be a success, we need interested
+For the Free Translation Project to be a success, we need interested
people who like their own language and write it well, and who are also
able to synergize with other translators speaking the same language.
Each translation team has its own mailing list. The up-to-date list of
Available Packages
==================
- Languages are not equally supported in all packages. The following
-matrix shows the current state of internationalization, as of May 2003.
-The matrix shows, in regard of each package, for which languages PO
-files have been submitted to translation coordination, with a
+Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of January
+2004. The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
translation percentage of at least 50%.
- Ready PO files am az be bg ca cs da de el en en_GB eo es
- +-------------------------------------------+
- a2ps | [] [] [] [] |
- aegis | () |
- anubis | |
- ap-utils | |
- bash | [] [] [] |
- batchelor | |
- bfd | [] [] |
- binutils | [] [] |
- bison | [] [] [] |
- bluez-pin | [] [] |
- clisp | |
- clisp | [] [] [] |
- coreutils | [] [] [] [] |
- cpio | [] [] [] |
- darkstat | () [] |
- diffutils | [] [] [] [] [] [] [] |
- e2fsprogs | [] [] |
- enscript | [] [] [] [] |
- error | [] [] [] [] [] |
- fetchmail | [] () [] [] [] [] |
- fileutils | [] [] [] |
- findutils | [] [] [] [] [] [] |
- flex | [] [] [] [] |
- gas | [] |
- gawk | [] [] [] [] |
- gcal | [] |
- gcc | [] [] |
- gettext | [] [] [] [] [] |
- gettext-runtime | [] [] [] [] [] |
- gettext-tools | [] [] |
- gimp-print | [] [] [] [] [] |
- gliv | |
- glunarclock | [] [] [] |
- gnucash | () [] |
- gnucash-glossary | [] () [] |
- gnupg | [] () [] [] [] [] |
- gpe-calendar | [] |
- gpe-conf | [] |
- gpe-contacts | [] |
- gpe-edit | |
- gpe-login | [] |
- gpe-ownerinfo | [] |
- gpe-sketchbook | [] |
- gpe-timesheet | |
- gpe-today | [] |
- gpe-todo | [] |
- gphoto2 | [] [] [] [] |
- gprof | [] [] |
- gpsdrive | () () () |
- grep | [] [] [] [] [] |
- gretl | [] |
- hello | [] [] [] [] [] [] |
- id-utils | [] [] |
- indent | [] [] [] [] |
- jpilot | [] [] [] [] |
- jwhois | [] |
- kbd | [] [] [] [] [] |
- ld | [] [] |
- libc | [] [] [] [] [] [] |
- libgpewidget | [] |
- libiconv | [] [] [] [] [] |
- lifelines | [] () |
- lilypond | [] |
- lingoteach | |
- lingoteach_lessons | () () |
- lynx | [] [] [] [] |
- m4 | [] [] [] [] |
- mailutils | [] [] |
- make | [] [] [] |
- man-db | [] () [] [] () |
- mysecretdiary | [] [] [] |
- nano | [] () [] [] [] |
- nano_1_0 | [] () [] [] [] |
- opcodes | [] [] |
- parted | [] [] [] [] [] |
- ptx | [] [] [] [] [] |
- python | |
- radius | |
- recode | [] [] [] [] [] [] |
- screem | |
- sed | [] [] [] [] [] |
- sh-utils | [] [] [] |
- sharutils | [] [] [] [] [] [] |
- sketch | [] () [] |
- soundtracker | [] [] [] |
- sp | [] |
- tar | [] [] [] [] |
- texinfo | [] [] [] [] |
- textutils | [] [] [] [] |
- tin | () () |
- util-linux | [] [] [] [] [] |
- vorbis-tools | [] [] [] |
- wastesedge | () |
- wdiff | [] [] [] [] |
- wget | [] [] [] [] [] [] [] |
- xchat | [] [] [] |
- xpad | |
- +-------------------------------------------+
- am az be bg ca cs da de el en en_GB eo es
- 0 1 4 2 31 17 54 60 14 1 4 12 56
+ Ready PO files af am ar az be bg bs ca cs da de el en en_GB eo es
+ +----------------------------------------------------+
+ a2ps | [] [] [] [] |
+ aegis | () |
+ ant-phone | () |
+ anubis | |
+ ap-utils | |
+ aspell | [] |
+ bash | [] [] [] [] |
+ batchelor | |
+ bfd | [] [] |
+ binutils | [] [] |
+ bison | [] [] [] |
+ bluez-pin | [] [] [] |
+ clisp | |
+ clisp | [] [] [] |
+ console-tools | [] [] |
+ coreutils | [] [] [] [] |
+ cpio | [] [] [] |
+ darkstat | [] () [] |
+ diffutils | [] [] [] [] [] [] [] |
+ e2fsprogs | [] [] [] |
+ enscript | [] [] [] [] |
+ error | [] [] [] [] [] |
+ fetchmail | [] () [] [] [] [] |
+ fileutils | [] [] [] |
+ findutils | [] [] [] [] [] [] [] |
+ flex | [] [] [] [] |
+ fslint | |
+ gas | [] |
+ gawk | [] [] [] [] |
+ gbiff | [] |
+ gcal | [] |
+ gcc | [] [] |
+ gettext | [] [] [] [] [] |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] |
+ gettext-tools | [] [] [] |
+ gimp-print | [] [] [] [] [] |
+ gliv | |
+ glunarclock | [] [] |
+ gnubiff | [] |
+ gnucash | [] () [] [] |
+ gnucash-glossary | [] () [] |
+ gnupg | [] () [] [] [] [] |
+ gpe-aerial | [] |
+ gpe-beam | [] [] |
+ gpe-calendar | [] [] |
+ gpe-clock | [] [] |
+ gpe-conf | [] [] |
+ gpe-contacts | [] [] |
+ gpe-edit | [] |
+ gpe-go | [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] |
+ gpe-taskmanager | [] [] |
+ gpe-timesheet | [] |
+ gpe-today | [] [] |
+ gpe-todo | [] [] |
+ gphoto2 | [] [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | () () () |
+ gramadoir | [] |
+ grep | [] [] [] [] [] [] |
+ gretl | [] |
+ gtick | [] () |
+ hello | [] [] [] [] [] [] |
+ id-utils | [] [] |
+ indent | [] [] [] [] |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_1 | [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_3166_3 | [] |
+ iso_4217 | [] [] [] [] |
+ iso_639 | |
+ jpilot | [] [] [] |
+ jtag | |
+ jwhois | [] |
+ kbd | [] [] [] [] [] |
+ latrine | () |
+ ld | [] [] |
+ libc | [] [] [] [] [] [] |
+ libgpewidget | [] [] |
+ libiconv | [] [] [] [] [] |
+ lifelines | [] () |
+ lilypond | [] |
+ lingoteach | |
+ lingoteach_lessons | () () |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailutils | [] [] |
+ make | [] [] [] |
+ man-db | [] () [] [] () |
+ minicom | [] [] [] |
+ mysecretdiary | [] [] [] |
+ nano | [] () [] [] [] |
+ nano_1_0 | [] () [] [] [] |
+ opcodes | [] |
+ parted | [] [] [] [] [] |
+ ptx | [] [] [] [] [] |
+ python | |
+ radius | [] |
+ recode | [] [] [] [] [] [] [] |
+ rpm | [] [] |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] |
+ sed | [] [] [] [] [] [] |
+ sh-utils | [] [] [] |
+ shared-mime-info | |
+ sharutils | [] [] [] [] [] [] |
+ silky | () |
+ skencil | [] () [] |
+ sketch | [] () [] |
+ soundtracker | [] [] [] |
+ sp | [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] |
+ textutils | [] [] [] [] |
+ tin | () () |
+ tp-robot | |
+ tuxpaint | [] [] [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] [] [] [] |
+ vorbis-tools | [] [] [] [] |
+ wastesedge | () |
+ wdiff | [] [] [] [] |
+ wget | [] [] [] [] [] [] |
+ xchat | [] [] [] [] |
+ xfree86_xkb_xml | [] [] |
+ xpad | [] |
+ +----------------------------------------------------+
+ af am ar az be bg bs ca cs da de el en en_GB eo es
+ 4 0 0 1 9 4 1 40 41 60 78 17 1 5 13 68
- et fa fi fr ga gl he hr hu id it ja ko
- +----------------------------------------+
- a2ps | [] [] [] () () |
- aegis | |
- anubis | [] |
- ap-utils | [] |
- bash | [] [] |
- batchelor | [] |
- bfd | [] [] |
- binutils | [] [] |
- bison | [] [] [] [] |
- bluez-pin | [] [] [] [] |
- clisp | |
- clisp | [] |
- coreutils | [] [] [] [] |
- cpio | [] [] [] [] |
- darkstat | () [] [] [] |
- diffutils | [] [] [] [] [] [] [] |
- e2fsprogs | |
- enscript | [] [] |
- error | [] [] [] [] |
- fetchmail | [] |
- fileutils | [] [] [] [] [] |
- findutils | [] [] [] [] [] [] [] [] [] [] [] |
- flex | [] [] |
- gas | [] |
- gawk | [] [] |
- gcal | [] |
- gcc | [] |
- gettext | [] [] [] |
- gettext-runtime | [] [] [] [] |
- gettext-tools | [] |
- gimp-print | [] [] |
- gliv | () |
- glunarclock | [] [] [] [] |
- gnucash | [] |
- gnucash-glossary | [] |
- gnupg | [] [] [] [] [] [] [] |
- gpe-calendar | [] |
- gpe-conf | |
- gpe-contacts | [] |
- gpe-edit | [] [] |
- gpe-login | [] |
- gpe-ownerinfo | [] [] [] |
- gpe-sketchbook | [] |
- gpe-timesheet | [] [] [] |
- gpe-today | [] [] |
- gpe-todo | [] [] |
- gphoto2 | [] [] [] |
- gprof | [] [] |
- gpsdrive | () [] () () |
- grep | [] [] [] [] [] [] [] [] [] [] [] |
- gretl | [] |
- hello | [] [] [] [] [] [] [] [] [] [] [] [] [] |
- id-utils | [] [] [] |
- indent | [] [] [] [] [] [] [] [] |
- jpilot | [] () |
- jwhois | [] [] [] [] |
- kbd | [] |
- ld | [] |
- libc | [] [] [] [] [] [] |
- libgpewidget | [] [] [] |
- libiconv | [] [] [] [] [] [] [] [] |
- lifelines | () |
- lilypond | [] |
- lingoteach | [] [] |
- lingoteach_lessons | |
- lynx | [] [] [] [] |
- m4 | [] [] [] [] |
- mailutils | |
- make | [] [] [] [] [] [] |
- man-db | [] () () |
- mysecretdiary | [] [] |
- nano | [] [] [] [] |
- nano_1_0 | [] [] [] [] |
- opcodes | [] [] |
- parted | [] [] [] |
- ptx | [] [] [] [] [] [] [] |
- python | |
- radius | |
- recode | [] [] [] [] [] [] |
- screem | |
- sed | [] [] [] [] [] [] [] [] |
- sh-utils | [] [] [] [] [] [] |
- sharutils | [] [] [] [] [] |
- sketch | [] |
- soundtracker | [] [] [] |
- sp | [] () |
- tar | [] [] [] [] [] [] [] [] [] |
- texinfo | [] [] [] [] |
- textutils | [] [] [] [] [] |
- tin | [] () |
- util-linux | [] [] [] [] () [] |
- vorbis-tools | [] |
- wastesedge | () |
- wdiff | [] [] [] [] [] |
- wget | [] [] [] [] [] [] [] [] |
- xchat | [] [] [] |
- xpad | |
- +----------------------------------------+
- et fa fi fr ga gl he hr hu id it ja ko
- 20 1 15 73 14 24 8 10 30 31 19 31 9
+ et eu fa fi fr ga gl he hr hu id is it ja ko lg
+ +-------------------------------------------------+
+ a2ps | [] [] [] () () |
+ aegis | |
+ ant-phone | [] |
+ anubis | [] |
+ ap-utils | [] |
+ aspell | [] [] |
+ bash | [] [] |
+ batchelor | [] [] |
+ bfd | [] |
+ binutils | [] [] |
+ bison | [] [] [] [] |
+ bluez-pin | [] [] [] [] [] |
+ clisp | |
+ clisp | [] |
+ console-tools | |
+ coreutils | [] [] [] [] [] [] |
+ cpio | [] [] [] [] |
+ darkstat | () [] [] [] |
+ diffutils | [] [] [] [] [] [] [] |
+ e2fsprogs | |
+ enscript | [] [] |
+ error | [] [] [] [] |
+ fetchmail | [] |
+ fileutils | [] [] [] [] [] [] |
+ findutils | [] [] [] [] [] [] [] [] [] [] [] |
+ flex | [] [] [] |
+ fslint | [] |
+ gas | [] |
+ gawk | [] [] [] |
+ gbiff | [] |
+ gcal | [] |
+ gcc | [] |
+ gettext | [] [] [] |
+ gettext-examples | [] [] |
+ gettext-runtime | [] [] [] [] [] |
+ gettext-tools | [] [] [] |
+ gimp-print | [] [] |
+ gliv | () |
+ glunarclock | [] [] [] [] |
+ gnubiff | [] |
+ gnucash | () [] |
+ gnucash-glossary | [] |
+ gnupg | [] [] [] [] [] [] [] |
+ gpe-aerial | [] |
+ gpe-beam | [] |
+ gpe-calendar | [] [] [] |
+ gpe-clock | [] |
+ gpe-conf | [] |
+ gpe-contacts | [] [] |
+ gpe-edit | [] [] |
+ gpe-go | [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] [] |
+ gpe-sketchbook | [] |
+ gpe-su | [] |
+ gpe-taskmanager | [] |
+ gpe-timesheet | [] [] [] |
+ gpe-today | [] [] |
+ gpe-todo | [] [] |
+ gphoto2 | [] [] [] |
+ gprof | [] [] |
+ gpsdrive | () () () |
+ gramadoir | [] [] |
+ grep | [] [] [] [] [] [] [] [] [] [] [] |
+ gretl | [] [] |
+ gtick | [] [] [] |
+ hello | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ id-utils | [] [] [] [] |
+ indent | [] [] [] [] [] [] [] [] [] |
+ iso_3166 | [] [] [] [] [] [] [] |
+ iso_3166_1 | [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_3166_3 | |
+ iso_4217 | [] [] [] [] [] [] |
+ iso_639 | |
+ jpilot | [] () |
+ jtag | [] |
+ jwhois | [] [] [] [] |
+ kbd | [] |
+ latrine | [] |
+ ld | [] |
+ libc | [] [] [] [] [] [] |
+ libgpewidget | [] [] [] [] |
+ libiconv | [] [] [] [] [] [] [] [] [] |
+ lifelines | () |
+ lilypond | [] |
+ lingoteach | [] [] |
+ lingoteach_lessons | |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailutils | |
+ make | [] [] [] [] [] [] |
+ man-db | () () |
+ minicom | [] [] [] [] |
+ mysecretdiary | [] [] |
+ nano | [] [] [] [] |
+ nano_1_0 | [] [] [] [] |
+ opcodes | [] |
+ parted | [] [] [] |
+ ptx | [] [] [] [] [] [] [] |
+ python | |
+ radius | [] |
+ recode | [] [] [] [] [] [] |
+ rpm | [] [] |
+ screem | |
+ scrollkeeper | [] |
+ sed | [] [] [] [] [] [] [] [] [] |
+ sh-utils | [] [] [] [] [] [] [] |
+ shared-mime-info | [] [] [] |
+ sharutils | [] [] [] [] [] |
+ silky | () [] () () |
+ skencil | [] |
+ sketch | [] |
+ soundtracker | [] [] |
+ sp | [] () |
+ tar | [] [] [] [] [] [] [] [] [] |
+ texinfo | [] [] [] [] |
+ textutils | [] [] [] [] [] [] |
+ tin | [] () |
+ tp-robot | [] |
+ tuxpaint | [] [] [] [] [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | [] [] |
+ util-linux | [] [] [] [] () [] |
+ vorbis-tools | [] |
+ wastesedge | () |
+ wdiff | [] [] [] [] [] [] |
+ wget | [] [] [] [] [] [] [] |
+ xchat | [] [] [] |
+ xfree86_xkb_xml | [] [] |
+ xpad | [] [] |
+ +-------------------------------------------------+
+ et eu fa fi fr ga gl he hr hu id is it ja ko lg
+ 22 2 1 26 106 28 24 8 10 41 33 1 26 33 12 0
- lg lt lv ms nb nl nn no pl pt pt_BR ro
- +----------------------------------------+
- a2ps | [] [] () () () [] [] |
- aegis | () |
- anubis | [] [] |
- ap-utils | () |
- bash | [] |
- batchelor | |
- bfd | |
- binutils | |
- bison | [] [] [] [] |
- bluez-pin | [] |
- clisp | |
- clisp | [] |
- coreutils | [] |
- cpio | [] [] [] |
- darkstat | [] [] [] [] |
- diffutils | [] [] [] |
- e2fsprogs | |
- enscript | [] [] |
- error | [] [] |
- fetchmail | () () |
- fileutils | [] |
- findutils | [] [] [] [] |
- flex | [] |
- gas | |
- gawk | [] |
- gcal | |
- gcc | |
- gettext | [] |
- gettext-runtime | [] |
- gettext-tools | |
- gimp-print | [] |
- gliv | [] |
- glunarclock | [] |
- gnucash | |
- gnucash-glossary | [] [] |
- gnupg | |
- gpe-calendar | [] [] |
- gpe-conf | [] [] |
- gpe-contacts | [] |
- gpe-edit | [] [] |
- gpe-login | [] [] |
- gpe-ownerinfo | [] [] |
- gpe-sketchbook | [] [] |
- gpe-timesheet | [] [] |
- gpe-today | [] [] |
- gpe-todo | [] [] |
- gphoto2 | |
- gprof | [] |
- gpsdrive | () () () |
- grep | [] [] [] [] |
- gretl | |
- hello | [] [] [] [] [] [] [] [] [] |
- id-utils | [] [] [] |
- indent | [] [] [] |
- jpilot | () () |
- jwhois | [] [] [] |
- kbd | |
- ld | |
- libc | [] [] [] [] |
- libgpewidget | [] [] |
- libiconv | [] [] |
- lifelines | |
- lilypond | [] |
- lingoteach | |
- lingoteach_lessons | |
- lynx | [] [] |
- m4 | [] [] [] [] |
- mailutils | |
- make | [] [] |
- man-db | [] |
- mysecretdiary | [] |
- nano | [] [] [] [] |
- nano_1_0 | [] [] [] [] |
- opcodes | [] [] [] |
- parted | [] [] [] |
- ptx | [] [] [] [] [] [] [] |
- python | |
- radius | |
- recode | [] [] [] |
- screem | |
- sed | [] [] |
- sh-utils | [] |
- sharutils | [] |
- sketch | [] |
- soundtracker | |
- sp | |
- tar | [] [] [] [] [] [] |
- texinfo | [] |
- textutils | [] |
- tin | |
- util-linux | [] [] |
- vorbis-tools | [] [] |
- wastesedge | |
- wdiff | [] [] [] [] |
- wget | [] [] [] |
- xchat | [] [] |
- xpad | [] |
- +----------------------------------------+
- lg lt lv ms nb nl nn no pl pt pt_BR ro
- 0 0 2 11 7 26 3 4 18 15 34 34
+ lt lv mk mn ms mt nb nl nn no nso pl pt pt_BR ro ru
+ +-----------------------------------------------------+
+ a2ps | [] [] () () [] [] [] |
+ aegis | () () () |
+ ant-phone | [] [] |
+ anubis | [] [] [] [] [] [] |
+ ap-utils | [] () [] |
+ aspell | [] |
+ bash | [] [] [] |
+ batchelor | [] |
+ bfd | [] |
+ binutils | [] |
+ bison | [] [] [] [] [] |
+ bluez-pin | [] [] [] |
+ clisp | |
+ clisp | [] |
+ console-tools | [] |
+ coreutils | [] [] |
+ cpio | [] [] [] [] [] |
+ darkstat | [] [] [] [] |
+ diffutils | [] [] [] [] [] [] |
+ e2fsprogs | [] |
+ enscript | [] [] [] [] |
+ error | [] [] [] |
+ fetchmail | [] [] () [] |
+ fileutils | [] [] [] |
+ findutils | [] [] [] [] [] |
+ flex | [] [] [] [] |
+ fslint | [] [] |
+ gas | |
+ gawk | [] [] [] |
+ gbiff | [] [] |
+ gcal | |
+ gcc | |
+ gettext | [] [] [] |
+ gettext-examples | [] [] [] |
+ gettext-runtime | [] [] [] [] |
+ gettext-tools | [] [] |
+ gimp-print | [] |
+ gliv | [] [] [] |
+ glunarclock | [] [] [] [] |
+ gnubiff | [] |
+ gnucash | [] [] () [] |
+ gnucash-glossary | [] [] |
+ gnupg | [] |
+ gpe-aerial | [] [] [] [] |
+ gpe-beam | [] [] [] [] |
+ gpe-calendar | [] [] [] [] |
+ gpe-clock | [] [] [] [] |
+ gpe-conf | [] [] [] [] |
+ gpe-contacts | [] [] [] [] |
+ gpe-edit | [] [] [] [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] [] [] [] |
+ gpe-ownerinfo | [] [] [] [] |
+ gpe-sketchbook | [] [] [] [] |
+ gpe-su | [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] |
+ gpe-timesheet | [] [] [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] [] [] [] |
+ gphoto2 | [] |
+ gprof | [] [] |
+ gpsdrive | () () [] |
+ gramadoir | () [] |
+ grep | [] [] [] [] [] |
+ gretl | |
+ gtick | [] [] [] |
+ hello | [] [] [] [] [] [] [] [] [] [] |
+ id-utils | [] [] [] [] |
+ indent | [] [] [] [] |
+ iso_3166 | [] [] [] |
+ iso_3166_1 | [] [] |
+ iso_3166_2 | |
+ iso_3166_3 | [] |
+ iso_4217 | [] [] [] [] [] [] [] [] |
+ iso_639 | [] |
+ jpilot | () () |
+ jtag | |
+ jwhois | [] [] [] [] () |
+ kbd | [] [] [] |
+ latrine | [] |
+ ld | |
+ libc | [] [] [] [] |
+ libgpewidget | [] [] [] |
+ libiconv | [] [] [] [] [] |
+ lifelines | |
+ lilypond | |
+ lingoteach | |
+ lingoteach_lessons | |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] [] |
+ mailutils | [] [] [] |
+ make | [] [] [] [] |
+ man-db | [] |
+ minicom | [] [] [] [] |
+ mysecretdiary | [] [] [] |
+ nano | [] [] [] [] [] |
+ nano_1_0 | [] [] [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] [] [] |
+ ptx | [] [] [] [] [] [] [] [] |
+ python | |
+ radius | [] [] |
+ recode | [] [] [] [] |
+ rpm | [] [] [] |
+ screem | |
+ scrollkeeper | [] [] [] [] [] |
+ sed | [] [] [] |
+ sh-utils | [] [] |
+ shared-mime-info | [] [] |
+ sharutils | [] [] |
+ silky | () |
+ skencil | [] [] |
+ sketch | [] [] |
+ soundtracker | |
+ sp | |
+ tar | [] [] [] [] [] [] |
+ texinfo | [] [] [] [] |
+ textutils | [] [] |
+ tin | |
+ tp-robot | [] |
+ tuxpaint | [] [] [] [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] [] |
+ vorbis-tools | [] [] [] |
+ wastesedge | |
+ wdiff | [] [] [] [] [] |
+ wget | [] [] [] |
+ xchat | [] [] [] |
+ xfree86_xkb_xml | [] [] |
+ xpad | [] [] |
+ +-----------------------------------------------------+
+ lt lv mk mn ms mt nb nl nn no nso pl pt pt_BR ro ru
+ 1 2 0 3 12 0 10 69 6 7 1 40 26 36 76 63
- ru sk sl sr sv ta tr uk vi wa zh_CN zh_TW
- +-------------------------------------------+
- a2ps | [] [] [] [] [] | 16
- aegis | () | 0
- anubis | [] [] | 5
- ap-utils | () | 1
- bash | [] | 7
- batchelor | | 1
- bfd | [] [] [] | 7
- binutils | [] [] [] | 7
- bison | [] [] | 13
- bluez-pin | | 7
- clisp | | 0
- clisp | | 5
- coreutils | [] [] [] [] [] | 14
- cpio | [] [] [] | 13
- darkstat | [] () () | 9
- diffutils | [] [] [] [] | 21
- e2fsprogs | [] | 3
- enscript | [] [] [] | 11
- error | [] [] [] | 14
- fetchmail | [] | 7
- fileutils | [] [] [] [] [] [] | 15
- findutils | [] [] [] [] [] [] | 27
- flex | [] [] [] | 10
- gas | [] | 3
- gawk | [] [] | 9
- gcal | [] [] | 4
- gcc | [] | 4
- gettext | [] [] [] [] [] [] | 15
- gettext-runtime | [] [] [] [] [] [] | 16
- gettext-tools | [] [] | 5
- gimp-print | [] [] | 10
- gliv | | 1
- glunarclock | [] [] [] | 11
- gnucash | [] [] | 4
- gnucash-glossary | [] [] [] | 8
- gnupg | [] [] [] [] | 16
- gpe-calendar | [] | 5
- gpe-conf | | 3
- gpe-contacts | [] | 4
- gpe-edit | [] | 5
- gpe-login | [] | 5
- gpe-ownerinfo | [] | 7
- gpe-sketchbook | [] | 5
- gpe-timesheet | [] | 6
- gpe-today | [] | 6
- gpe-todo | [] | 6
- gphoto2 | [] [] | 9
- gprof | [] [] | 7
- gpsdrive | [] [] | 3
- grep | [] [] [] [] | 24
- gretl | | 2
- hello | [] [] [] [] [] | 33
- id-utils | [] [] [] | 11
- indent | [] [] [] [] | 19
- jpilot | [] [] [] [] [] | 10
- jwhois | () () [] [] | 10
- kbd | [] [] | 8
- ld | [] [] | 5
- libc | [] [] [] [] | 20
- libgpewidget | | 6
- libiconv | [] [] [] [] [] [] | 21
- lifelines | [] | 2
- lilypond | [] | 4
- lingoteach | | 2
- lingoteach_lessons | () | 0
- lynx | [] [] [] [] | 14
- m4 | [] [] [] | 15
- mailutils | | 2
- make | [] [] [] [] | 15
- man-db | [] | 6
- mysecretdiary | [] [] | 8
- nano | [] [] [] | 15
- nano_1_0 | [] [] [] | 15
- opcodes | [] [] | 9
- parted | [] [] | 13
- ptx | [] [] [] | 22
- python | | 0
- radius | | 0
- recode | [] [] [] [] | 19
- screem | [] | 1
- sed | [] [] [] [] [] | 20
- sh-utils | [] [] [] | 13
- sharutils | [] [] [] [] | 16
- sketch | [] | 5
- soundtracker | [] | 7
- sp | [] | 3
- tar | [] [] [] [] [] | 24
- texinfo | [] [] [] [] | 13
- textutils | [] [] [] [] [] | 15
- tin | | 1
- util-linux | [] [] | 14
- vorbis-tools | [] | 7
- wastesedge | | 0
- wdiff | [] [] [] [] | 17
- wget | [] [] [] [] [] [] [] | 25
- xchat | [] [] [] | 11
- xpad | | 1
- +-------------------------------------------+
- 50 teams ru sk sl sr sv ta tr uk vi wa zh_CN zh_TW
- 97 domains 32 19 16 0 56 0 48 10 1 1 12 23 913
+ sk sl sr sv ta th tr uk ven vi wa xh zh_CN zh_TW zu
+ +-----------------------------------------------------+
+ a2ps | [] [] [] [] | 16
+ aegis | | 0
+ ant-phone | | 3
+ anubis | [] [] | 9
+ ap-utils | () | 3
+ aspell | | 4
+ bash | | 9
+ batchelor | | 3
+ bfd | [] [] | 6
+ binutils | [] [] [] | 8
+ bison | [] [] | 14
+ bluez-pin | [] [] [] | 14
+ clisp | | 0
+ clisp | | 5
+ console-tools | | 3
+ coreutils | [] [] [] [] | 16
+ cpio | [] [] | 14
+ darkstat | [] [] [] () () | 12
+ diffutils | [] [] [] | 23
+ e2fsprogs | [] [] | 6
+ enscript | [] [] | 12
+ error | [] [] [] | 15
+ fetchmail | [] [] | 11
+ fileutils | [] [] [] [] [] | 17
+ findutils | [] [] [] [] [] [] | 29
+ flex | [] [] | 13
+ fslint | | 3
+ gas | [] | 3
+ gawk | [] [] | 12
+ gbiff | | 4
+ gcal | [] [] | 4
+ gcc | [] | 4
+ gettext | [] [] [] [] [] | 16
+ gettext-examples | [] [] [] [] [] | 14
+ gettext-runtime | [] [] [] [] [] [] [] [] | 22
+ gettext-tools | [] [] [] [] [] [] | 14
+ gimp-print | [] [] | 10
+ gliv | | 3
+ glunarclock | [] [] [] | 13
+ gnubiff | | 3
+ gnucash | [] [] | 9
+ gnucash-glossary | [] [] [] | 8
+ gnupg | [] [] [] [] | 17
+ gpe-aerial | [] | 7
+ gpe-beam | [] | 8
+ gpe-calendar | [] [] [] [] | 13
+ gpe-clock | [] [] [] | 10
+ gpe-conf | [] [] | 9
+ gpe-contacts | [] [] [] | 11
+ gpe-edit | [] [] [] [] [] | 12
+ gpe-go | | 5
+ gpe-login | [] [] [] [] [] | 13
+ gpe-ownerinfo | [] [] [] [] | 13
+ gpe-sketchbook | [] [] | 9
+ gpe-su | [] [] [] | 10
+ gpe-taskmanager | [] [] [] | 10
+ gpe-timesheet | [] [] [] [] | 12
+ gpe-today | [] [] [] [] [] | 13
+ gpe-todo | [] [] [] [] | 12
+ gphoto2 | [] [] [] | 11
+ gprof | [] [] | 9
+ gpsdrive | [] [] | 3
+ gramadoir | [] | 5
+ grep | [] [] [] [] | 26
+ gretl | | 3
+ gtick | | 7
+ hello | [] [] [] [] [] | 34
+ id-utils | [] [] | 12
+ indent | [] [] [] [] | 21
+ iso_3166 | [] [] [] [] [] [] [] | 27
+ iso_3166_1 | [] [] [] | 16
+ iso_3166_2 | | 0
+ iso_3166_3 | | 2
+ iso_4217 | [] [] [] [] [] [] | 24
+ iso_639 | | 1
+ jpilot | [] [] [] [] [] | 9
+ jtag | [] | 2
+ jwhois | () [] [] | 11
+ kbd | [] [] | 11
+ latrine | | 2
+ ld | [] [] | 5
+ libc | [] [] [] [] | 20
+ libgpewidget | [] [] [] [] | 13
+ libiconv | [] [] [] [] [] [] [] [] | 27
+ lifelines | [] | 2
+ lilypond | [] | 3
+ lingoteach | | 2
+ lingoteach_lessons | () | 0
+ lynx | [] [] [] | 14
+ m4 | [] [] | 15
+ mailutils | | 5
+ make | [] [] [] | 16
+ man-db | [] | 5
+ minicom | | 11
+ mysecretdiary | [] [] | 10
+ nano | [] [] [] [] | 17
+ nano_1_0 | [] [] [] | 17
+ opcodes | [] [] | 6
+ parted | [] [] [] | 15
+ ptx | [] [] | 22
+ python | | 0
+ radius | | 4
+ recode | [] [] [] | 20
+ rpm | [] [] | 9
+ screem | [] [] | 2
+ scrollkeeper | [] [] [] | 15
+ sed | [] [] [] [] [] [] | 24
+ sh-utils | [] [] | 14
+ shared-mime-info | [] [] | 7
+ sharutils | [] [] [] [] | 17
+ silky | () | 3
+ skencil | [] | 6
+ sketch | [] | 6
+ soundtracker | [] [] | 7
+ sp | [] | 3
+ tar | [] [] [] [] [] | 24
+ texinfo | [] [] [] | 14
+ textutils | [] [] [] [] | 16
+ tin | | 1
+ tp-robot | | 2
+ tuxpaint | [] [] [] [] [] | 29
+ unicode-han-tra... | | 0
+ unicode-transla... | | 2
+ util-linux | [] [] | 15
+ vorbis-tools | | 8
+ wastesedge | | 0
+ wdiff | [] [] [] | 18
+ wget | [] [] [] [] [] [] [] [] | 24
+ xchat | [] [] [] [] [] | 15
+ xfree86_xkb_xml | [] [] [] [] [] | 11
+ xpad | | 5
+ +-----------------------------------------------------+
+ 63 teams sk sl sr sv ta th tr uk ven vi wa xh zh_CN zh_TW zu
+ 131 domains 47 19 28 83 0 0 59 13 1 1 11 0 22 22 0 1373
Some counters in the preceding matrix are higher than the number of
visible blocks let us expect. This is because a few extra PO files are
lag between the mere existence a PO file and its wide availability in a
distribution.
- If May 2003 seems to be old, you may fetch a more recent copy of
+ If January 2004 seems to be old, you may fetch a more recent copy of
this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
matrix with full percentage details can be found at
`http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'.
Using `gettext' in new packages
===============================
- If you are writing a freely available program and want to
+If you are writing a freely available program and want to
internationalize it you are welcome to use GNU `gettext' in your
package. Of course you have to respect the GNU Library General Public
License which covers the use of the GNU `gettext' library. This means
+2004-04-05 gettextize <bug-gnu-gettext@gnu.org>
+
+ * Makefile.am (SUBDIRS): Add m4.
+ (SUBDIRS): Remove intl.
+ (ACLOCAL_AMFLAGS): New variable.
+ (EXTRA_DIST): Add config.rpath.
+ * configure.in (AC_CONFIG_FILES): Add m4/Makefile.
+
Changes in 21.5
not-yet-released
* Sven Dahl provides a patch for using psmisc with uclibc
SUBDIRS = m4 doc src po icons
-EXTRA_DIST= config.rpath ABOUT-NLS mkinstalldirs
+EXTRA_DIST= config.rpath config.rpath ABOUT-NLS mkinstalldirs
+#ACLOCAL_AMFLAGS = -I m4
+
ACLOCAL_AMFLAGS = -I m4
@%:@! /bin/sh
@%:@ Guess values for system-dependent variables and create Makefiles.
-@%:@ Generated by GNU Autoconf 2.58.
+@%:@ Generated by GNU Autoconf 2.59.
@%:@
@%:@ Copyright (C) 2003 Free Software Foundation, Inc.
@%:@ This configure script is free software; the Free Software Foundation
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION EXEEXT OBJEXT ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh INSTALL_STRIP_PROGRAM AWK SET_MAKE AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH DEPDIR CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC am__include am__quote CCDEPMODE CPP build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL FLASK_LINUX FLASK_LIB TERMCAP_LIB INO_T_IS_LONG_LONG INO_T_IS_INT MKINSTALLDIRS USE_NLS MSGFMT GMSGFMT XGETTEXT MSGMERGE LIBICONV LTLIBICONV INTLLIBS LIBINTL LTLIBINTL POSUB LIB@&t@OBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP build build_cpu build_vendor build_os host host_cpu host_vendor host_os EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CXX CXXFLAGS ac_ct_CXX CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL FLASK_LINUX FLASK_LIB TERMCAP_LIB INO_T_IS_LONG_LONG INO_T_IS_INT MKINSTALLDIRS USE_NLS MSGFMT GMSGFMT XGETTEXT MSGMERGE LIBICONV LTLIBICONV INTLLIBS LIBINTL LTLIBINTL POSUB LIB@&t@OBJS LTLIBOBJS'
ac_subst_files=''
# Initialize some variables set by options.
Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --disable-dependency-tracking Speeds up one-time builds
- --enable-dependency-tracking Do not reject slow dependency extractors
--enable-shared@<:@=PKGS@:>@
build shared libraries @<:@default=yes@:>@
--enable-static@<:@=PKGS@:>@
build static libraries @<:@default=yes@:>@
--enable-fast-install@<:@=PKGS@:>@
optimize for fast installation @<:@default=yes@:>@
- --disable-libtool-lock
- avoid locking (might break parallel builds)
+ --disable-libtool-lock avoid locking (might break parallel builds)
--enable-flask Enable Security-Enhanced Linux features
--disable-nls do not use Native Language Support
--disable-rpath do not hardcode runtime library paths
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-gnu-ld
- assume the C compiler uses GNU ld @<:@default=no@:>@
- --with-pic
- try to use only PIC/non-PIC objects @<:@default=use both@:>@
+ --with-gnu-ld assume the C compiler uses GNU ld @<:@default=no@:>@
+ --with-pic try to use only PIC/non-PIC objects @<:@default=use
+ both@:>@
--with-tags@<:@=TAGS@:>@
include additional configurations @<:@automatic@:>@
--with-gnu-ld assume the C compiler uses GNU ld default=no
--without-libintl-prefix don't search for libintl in includedir and libdir
Some influential environment variables:
- CC
- C compiler command
- CFLAGS
- C compiler flags
- LDFLAGS
- linker flags, e.g. -L<lib dir> if you have
- libraries in a nonstandard directory <lib dir>
- CPPFLAGS
- C/C++ preprocessor flags, e.g. -I<include dir> if you
- have headers in a nonstandard directory <include dir>
- CPP
- C preprocessor
- CXX
- C++ compiler command
- CXXFLAGS
- C++ compiler flags
- CXXCPP
- C++ preprocessor
- F77
- Fortran 77 compiler command
- FFLAGS
- Fortran 77 compiler flags
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ CPPFLAGS C/C++ preprocessor flags, e.g. -I<include dir> if you have
+ headers in a nonstandard directory <include dir>
+ CPP C preprocessor
+ CXX C++ compiler command
+ CXXFLAGS C++ compiler flags
+ CXXCPP C++ preprocessor
+ F77 Fortran 77 compiler command
+ FFLAGS Fortran 77 compiler flags
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me, which was
-generated by GNU Autoconf 2.58. Invocation command line was
+generated by GNU Autoconf 2.59. Invocation command line was
$ $0 $@
-
-
-
- ac_config_headers="$ac_config_headers config.h"
-
+
+ ac_config_headers="$ac_config_headers config.h"
+
+ ac_config_commands="$ac_config_commands default-1"
+
+am__api_version="1.4"
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
# Just in case
sleep 1
-echo timestamp > conftest.file
+echo timestamp > conftestfile
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
- set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
- set X `ls -t $srcdir/configure conftest.file`
+ set X `ls -t $srcdir/configure conftestfile`
fi
- rm -f conftest.file
- if test "$*" != "X $srcdir/configure conftest.file" \
- && test "$*" != "X conftest.file $srcdir/configure"; then
+ if test "$*" != "X $srcdir/configure conftestfile" \
+ && test "$*" != "X conftestfile $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
{ (exit 1); exit 1; }; }
fi
- test "$2" = conftest.file
+ test "$2" = conftestfile
)
then
# Ok.
Check your system clock" >&2;}
{ (exit 1); exit 1; }; }
fi
+rm -f conftest*
echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6
test "$program_prefix" != NONE &&
program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
rm conftest.sed
-
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd`
-
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
- am_missing_run="$MISSING --run "
-else
- am_missing_run=
- am_backtick='`'
- { echo "$as_me:$LINENO: WARNING: ${am_backtick}missing' script is too old or missing" >&5
-echo "$as_me: WARNING: ${am_backtick}missing' script is too old or missing" >&2;}
-fi
-
-for ac_prog in gawk mawk nawk awk
-do
- # Extract the first word of "$ac_prog", so it can be a program name with args.
-set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_AWK+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -n "$AWK"; then
- ac_cv_prog_AWK="$AWK" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_AWK="$ac_prog"
- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
-done
-
-fi
-fi
-AWK=$ac_cv_prog_AWK
-if test -n "$AWK"; then
- echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
-else
- echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
- test -n "$AWK" && break
-done
-
echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
SET_MAKE="MAKE=${MAKE-make}"
fi
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
-if test "${enable_dependency_tracking+set}" = set; then
- enableval="$enable_dependency_tracking"
-
-fi;
-if test "x$enable_dependency_tracking" != xno; then
- am_depcomp="$ac_aux_dir/depcomp"
- AMDEPBACKSLASH='\'
-fi
-
-
-if test "x$enable_dependency_tracking" != xno; then
- AMDEP_TRUE=
- AMDEP_FALSE='#'
-else
- AMDEP_TRUE='#'
- AMDEP_FALSE=
-fi
-
+PACKAGE=psmisc
+VERSION=21.5cvs
-rm -f .deps 2>/dev/null
-mkdir .deps 2>/dev/null
-if test -d .deps; then
- DEPDIR=.deps
-else
- # MS-DOS does not allow filenames that begin with a dot.
- DEPDIR=_deps
-fi
-rmdir .deps 2>/dev/null
-
-
-# test to see if srcdir already configured
-if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" &&
- test -f $srcdir/config.status; then
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
{ { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5
echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
{ (exit 1); exit 1; }; }
fi
-# Define the identity of the package.
-PACKAGE=psmisc
-VERSION=21.5cvs
-
cat >>confdefs.h <<_ACEOF
@%:@define PACKAGE "$PACKAGE"
_ACEOF
_ACEOF
-# Autoconf 2.50 wants to disallow AM_ names. We explicitly allow
-# the ones we care about.
-
-# Autoconf 2.50 always computes EXEEXT. However we need to be
-# compatible with 2.13, for now. So we always define EXEEXT, but we
-# don't compute it.
-
-# Similar for OBJEXT -- only we only use OBJEXT if the user actually
-# requests that it be used. This is a bit dumb.
-: ${OBJEXT=o}
-
-
-# Some tools Automake needs.
-
-ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal"}
+missing_dir=`cd $ac_aux_dir && pwd`
+echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5
+echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
+ ACLOCAL=aclocal-${am__api_version}
+ echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6
+else
+ ACLOCAL="$missing_dir/missing aclocal-${am__api_version}"
+ echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6
+fi
-AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
-
-
-AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake"}
-
-
-AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
-
-
-MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
-
+echo "$as_me:$LINENO: checking for working autoconf" >&5
+echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+ AUTOCONF=autoconf
+ echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6
+else
+ AUTOCONF="$missing_dir/missing autoconf"
+ echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6
+fi
-AMTAR=${AMTAR-"${am_missing_run}tar"}
+echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5
+echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then
+ AUTOMAKE=automake-${am__api_version}
+ echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6
+else
+ AUTOMAKE="$missing_dir/missing automake-${am__api_version}"
+ echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6
+fi
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
+echo "$as_me:$LINENO: checking for working autoheader" >&5
+echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+ AUTOHEADER=autoheader
+ echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6
+else
+ AUTOHEADER="$missing_dir/missing autoheader"
+ echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6
+fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+echo "$as_me:$LINENO: checking for working makeinfo" >&5
+echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+ MAKEINFO=makeinfo
+ echo "$as_me:$LINENO: result: found" >&5
+echo "${ECHO_T}found" >&6
+else
+ MAKEINFO="$missing_dir/missing makeinfo"
+ echo "$as_me:$LINENO: result: missing" >&5
+echo "${ECHO_T}missing" >&6
+fi
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
ac_ext=c
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
- ac_config_commands="$ac_config_commands default-1"
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
-doit:
- @echo done
-END
-# If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
-am__include='#'
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# We grep out `Entering directory' and `Leaving directory'
-# messages which can occur if `w' ends up in MAKEFLAGS.
-# In particular we don't look at `^make:' because GNU make might
-# be invoked under some other name (usually "gmake"), in which
-# case it prints its new name instead of `make'.
-if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
- am__include=include
- am__quote=
- _am_result=GNU
-fi
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
- am__include=.include
- am__quote='"'
- _am_result=BSD
- fi
-fi
-
-
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
-rm -f confinc confmf
-
-
-depcc="$CC" am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
-
- am_cv_CC_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- echo '#include "conftest.h"' > conftest.c
- echo 'int i;' > conftest.h
- echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=conftest.c object=conftest.o \
- depfile=conftest.Po tmpdepfile=conftest.TPo \
- $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
- grep conftest.h conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- am_cv_CC_dependencies_compiler_type=$depmode
- break
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CC_dependencies_compiler_type=none
-fi
-
-fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
-CCDEPMODE="depmode=$am_cv_CC_dependencies_compiler_type"
-
-
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
lt_cv_deplibs_check_method=pass_all
;;
-netbsd*)
+netbsd* | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-depcc="$CXX" am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
- # We make a subdir and do the tests there. Otherwise we can end up
- # making bogus files that we don't know about and never remove. For
- # instance it was reported that on HP-UX the gcc test will end up
- # making a dummy file named `D' -- because `-MD' means `put the output
- # in D'.
- mkdir conftest.dir
- # Copy depcomp to subdir because otherwise we won't find it if we're
- # using a relative directory.
- cp "$am_depcomp" conftest.dir
- cd conftest.dir
-
- am_cv_CXX_dependencies_compiler_type=none
- if test "$am_compiler_list" = ""; then
- am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
- fi
- for depmode in $am_compiler_list; do
- # We need to recreate these files for each test, as the compiler may
- # overwrite some of them when testing with obscure command lines.
- # This happens at least with the AIX C compiler.
- echo '#include "conftest.h"' > conftest.c
- echo 'int i;' > conftest.h
- echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf
-
- case $depmode in
- nosideeffect)
- # after this tag, mechanisms are not by side-effect, so they'll
- # only be used when explicitly requested
- if test "x$enable_dependency_tracking" = xyes; then
- continue
- else
- break
- fi
- ;;
- none) break ;;
- esac
- # We check with `-c' and `-o' for the sake of the "dashmstdout"
- # mode. It turns out that the SunPro C++ compiler does not properly
- # handle `-M -o', and we need to detect this.
- if depmode=$depmode \
- source=conftest.c object=conftest.o \
- depfile=conftest.Po tmpdepfile=conftest.TPo \
- $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
- grep conftest.h conftest.Po > /dev/null 2>&1 &&
- ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
- am_cv_CXX_dependencies_compiler_type=$depmode
- break
- fi
- done
-
- cd ..
- rm -rf conftest.dir
-else
- am_cv_CXX_dependencies_compiler_type=none
-fi
-
-fi
-echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6
-CXXDEPMODE="depmode=$am_cv_CXX_dependencies_compiler_type"
-
-
ac_ext=cc
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
- # that will create temporary files in the current directory regardless of
- # the output directory. Thus, making CWD read-only will cause this test
- # to fail, enabling locking or at least warning the user not to do parallel
- # builds.
- chmod -w .
-
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
fi
;;
- netbsd*)
+ netbsd* | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
link_all_deplibs=yes
;;
- netbsd*)
+ netbsd* | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
;;
esac
;;
- netbsd*)
+ netbsd* | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
;;
esac
;;
- netbsd*)
+ netbsd* | knetbsd*-gnu)
;;
osf3* | osf4* | osf5*)
case $cc_basename in
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
- # that will create temporary files in the current directory regardless of
- # the output directory. Thus, making CWD read-only will cause this test
- # to fail, enabling locking or at least warning the user not to do parallel
- # builds.
- chmod -w .
-
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
- # that will create temporary files in the current directory regardless of
- # the output directory. Thus, making CWD read-only will cause this test
- # to fail, enabling locking or at least warning the user not to do parallel
- # builds.
- chmod -w .
-
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
fi
;;
- netbsd*)
+ netbsd* | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
link_all_deplibs_F77=yes
;;
- netbsd*)
+ netbsd* | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
- # According to Tom Tromey, Ian Lance Taylor reported there are C compilers
- # that will create temporary files in the current directory regardless of
- # the output directory. Thus, making CWD read-only will cause this test
- # to fail, enabling locking or at least warning the user not to do parallel
- # builds.
- chmod -w .
-
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
fi
;;
- netbsd*)
+ netbsd* | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
link_all_deplibs_GCJ=yes
;;
- netbsd*)
+ netbsd* | knetbsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
esac
else
if test "$cross_compiling" = yes; then
- { { echo "$as_me:$LINENO: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&5
-echo "$as_me: error: cannot run test program while cross compiling
-See \`config.log' for more details." >&2;}
+ { { echo "$as_me:$LINENO: error: internal error: not reached in cross-compile" >&5
+echo "$as_me: error: internal error: not reached in cross-compile" >&2;}
{ (exit 1); exit 1; }; }
else
cat >conftest.$ac_ext <<_ACEOF
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
- if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
+ case `"$acl_cv_path_LD" -v 2>&1 < /dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break ;;
+ *)
+ test "$with_gnu_ld" != yes && break ;;
+ esac
fi
done
IFS="$ac_save_ifs"
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- acl_cv_prog_gnu_ld=yes
-else
- acl_cv_prog_gnu_ld=no
-fi
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ acl_cv_prog_gnu_ld=yes ;;
+*)
+ acl_cv_prog_gnu_ld=no ;;
+esac
fi
echo "$as_me:$LINENO: result: $acl_cv_prog_gnu_ld" >&5
echo "${ECHO_T}$acl_cv_prog_gnu_ld" >&6
fi
- ac_config_files="$ac_config_files Makefile doc/Makefile src/Makefile po/Makefile.in m4/Makefile icons/Makefile"
+ ac_config_files="$ac_config_files Makefile doc/Makefile src/Makefile po/Makefile.in icons/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
cat >&5 <<_CSEOF
This file was extended by $as_me, which was
-generated by GNU Autoconf 2.58. Invocation command line was
+generated by GNU Autoconf 2.59. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
config.status
-configured by $0, generated by GNU Autoconf 2.58,
+configured by $0, generated by GNU Autoconf 2.59,
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
Copyright (C) 2003 Free Software Foundation, Inc.
# INIT-COMMANDS section.
#
-AMDEP_TRUE="$AMDEP_TRUE"
-ac_aux_dir="$ac_aux_dir"
+
# Capture the value of obsolete ALL_LINGUAS because we need it to compute
- # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it
+ # POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES, CATALOGS. But hide it
# from automake.
eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"'
# Capture the value of LINGUAS because we need it to compute CATALOGS.
"doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
"src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
"po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;;
- "m4/Makefile" ) CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;;
"icons/Makefile" ) CONFIG_FILES="$CONFIG_FILES icons/Makefile" ;;
"default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
"default-2" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-2" ;;
s,@INSTALL_DATA@,$INSTALL_DATA,;t t
s,@PACKAGE@,$PACKAGE,;t t
s,@VERSION@,$VERSION,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
s,@ACLOCAL@,$ACLOCAL,;t t
s,@AUTOCONF@,$AUTOCONF,;t t
s,@AUTOMAKE@,$AUTOMAKE,;t t
s,@AUTOHEADER@,$AUTOHEADER,;t t
s,@MAKEINFO@,$MAKEINFO,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@install_sh@,$install_sh,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@AWK@,$AWK,;t t
s,@SET_MAKE@,$SET_MAKE,;t t
-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@DEPDIR@,$DEPDIR,;t t
s,@CC@,$CC,;t t
s,@CFLAGS@,$CFLAGS,;t t
s,@LDFLAGS@,$LDFLAGS,;t t
s,@CPPFLAGS@,$CPPFLAGS,;t t
s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@am__include@,$am__include,;t t
-s,@am__quote@,$am__quote,;t t
-s,@CCDEPMODE@,$CCDEPMODE,;t t
+s,@EXEEXT@,$EXEEXT,;t t
+s,@OBJEXT@,$OBJEXT,;t t
s,@CPP@,$CPP,;t t
s,@build@,$build,;t t
s,@build_cpu@,$build_cpu,;t t
s,@CXX@,$CXX,;t t
s,@CXXFLAGS@,$CXXFLAGS,;t t
s,@ac_ct_CXX@,$ac_ct_CXX,;t t
-s,@CXXDEPMODE@,$CXXDEPMODE,;t t
s,@CXXCPP@,$CXXCPP,;t t
s,@F77@,$F77,;t t
s,@FFLAGS@,$FFLAGS,;t t
cat $tmp/config.h
rm -f $tmp/config.h
fi
- # Run the commands associated with the file.
- case $ac_file in
- config.h ) # update the timestamp
-echo timestamp >"./stamp-h1"
- ;;
- esac
done
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
{ echo "$as_me:$LINENO: executing $ac_dest commands" >&5
echo "$as_me: executing $ac_dest commands" >&6;}
case $ac_dest in
- default-1 )
-test x"$AMDEP_TRUE" != x"" ||
-for mf in $CONFIG_FILES; do
- case "$mf" in
- Makefile) dirpart=.;;
- */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;;
- *) continue;;
- esac
- grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
- # Extract the definition of DEP_FILES from the Makefile without
- # running `make'.
- DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
- test -z "$DEPDIR" && continue
- # When using ansi2knr, U may be empty or an underscore; expand it
- U=`sed -n -e '/^U = / s///p' < "$mf"`
- test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
- # We invoke sed twice because it is the simplest approach to
- # changing $(DEPDIR) to its actual value in the expansion.
- for file in `sed -n -e '
- /^DEP_FILES = .*\\\\$/ {
- s/^DEP_FILES = //
- :loop
- s/\\\\$//
- p
- n
- /\\\\$/ b loop
- p
- }
- /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`echo "$file" | sed -e 's|/[^/]*$||'`
- $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
-done
- ;;
+ default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;;
default-2 )
for ac_file in $CONFIG_FILES; do
# Support "outfile[:infile[:infile...]]"
test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES"
POMAKEFILEDEPS="POTFILES.in"
- # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend
+ # ALL_LINGUAS, POFILES, UPDATEPOFILES, DUMMYPOFILES, GMOFILES depend
# on $ac_dir but don't depend on user-specified configuration
# parameters.
if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then
# The set of available languages was given in configure.in.
eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS'
fi
+ # Compute POFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).po)
+ # Compute UPDATEPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).po-update)
+ # Compute DUMMYPOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(lang).nop)
+ # Compute GMOFILES
+ # as $(foreach lang, $(ALL_LINGUAS), $(srcdir)/$(lang).gmo)
case "$ac_given_srcdir" in
.) srcdirpre= ;;
*) srcdirpre='$(srcdir)/' ;;
esac
POFILES=
- GMOFILES=
UPDATEPOFILES=
DUMMYPOFILES=
+ GMOFILES=
for lang in $ALL_LINGUAS; do
POFILES="$POFILES $srcdirpre$lang.po"
- GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
UPDATEPOFILES="$UPDATEPOFILES $lang.po-update"
DUMMYPOFILES="$DUMMYPOFILES $lang.nop"
+ GMOFILES="$GMOFILES $srcdirpre$lang.gmo"
done
# CATALOGS depends on both $ac_dir and the user's LINGUAS
# environment variable.
done
fi
test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
- sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
+ sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do
if test -f "$f"; then
case "$f" in
-# This file was generated by Autom4te Thu Dec 18 16:38:34 PST 2003.
+# This file was generated by Autom4te Sat Mar 13 12:27:59 PST 2004.
# It contains the lists of macros which have been traced.
# It can be safely removed.
{
'm4_pattern_forbid' => 1,
'AC_CONFIG_LIBOBJ_DIR' => 1,
- 'AC_TYPE_OFF_T' => 1,
'AC_C_VOLATILE' => 1,
+ 'AC_TYPE_OFF_T' => 1,
'AC_FUNC_CLOSEDIR_VOID' => 1,
'AC_REPLACE_FNMATCH' => 1,
'AC_PROG_LIBTOOL' => 1,
'AC_FUNC_STAT' => 1,
- 'AC_HEADER_TIME' => 1,
'AC_FUNC_WAIT3' => 1,
- 'AM_AUTOMAKE_VERSION' => 1,
- 'AC_STRUCT_TM' => 1,
+ 'AC_HEADER_TIME' => 1,
'AC_FUNC_LSTAT' => 1,
- 'AC_TYPE_MODE_T' => 1,
+ 'AC_STRUCT_TM' => 1,
+ 'AM_AUTOMAKE_VERSION' => 1,
'AC_FUNC_GETMNTENT' => 1,
+ 'AC_TYPE_MODE_T' => 1,
'AC_FUNC_STRTOD' => 1,
'AC_CHECK_HEADERS' => 1,
'AC_FUNC_STRNLEN' => 1,
'AC_STRUCT_ST_BLOCKS' => 1,
'AC_TYPE_SIGNAL' => 1,
'AC_TYPE_UID_T' => 1,
- 'AC_CONFIG_AUX_DIR' => 1,
'AC_PROG_MAKE_SET' => 1,
- 'sinclude' => 1,
+ 'AC_CONFIG_AUX_DIR' => 1,
'm4_pattern_allow' => 1,
+ 'sinclude' => 1,
'AC_DEFINE_TRACE_LITERAL' => 1,
'AC_FUNC_STRERROR_R' => 1,
'AC_PROG_CC' => 1,
'AC_FUNC_FORK' => 1,
'AC_DECL_SYS_SIGLIST' => 1,
- 'AC_FUNC_VPRINTF' => 1,
'AC_FUNC_STRCOLL' => 1,
+ 'AC_FUNC_VPRINTF' => 1,
'AC_PROG_YACC' => 1,
'AC_INIT' => 1,
'AC_STRUCT_TIMEZONE' => 1,
'AM_MAINTAINER_MODE' => 1,
'AC_FUNC_UTIME_NULL' => 1,
'AC_FUNC_SELECT_ARGTYPES' => 1,
- 'AC_FUNC_STRFTIME' => 1,
'AC_HEADER_STAT' => 1,
- 'AC_C_INLINE' => 1,
+ 'AC_FUNC_STRFTIME' => 1,
'AC_PROG_CPP' => 1,
- 'AC_TYPE_PID_T' => 1,
- 'AC_C_CONST' => 1,
+ 'AC_C_INLINE' => 1,
'AC_PROG_LEX' => 1,
+ 'AC_C_CONST' => 1,
+ 'AC_TYPE_PID_T' => 1,
'AC_CONFIG_FILES' => 1,
'include' => 1,
'AC_FUNC_SETVBUF_REVERSED' => 1,
'AH_OUTPUT' => 1,
'AC_FUNC_FSEEKO' => 1,
'AM_PROG_CC_C_O' => 1,
- 'AM_CONDITIONAL' => 1,
- 'AC_CANONICAL_SYSTEM' => 1,
'AC_FUNC_MKTIME' => 1,
+ 'AC_CANONICAL_SYSTEM' => 1,
+ 'AM_CONDITIONAL' => 1,
'AC_CONFIG_HEADERS' => 1,
'AC_HEADER_SYS_WAIT' => 1,
- 'AC_FUNC_MEMCMP' => 1,
'AC_PROG_LN_S' => 1,
+ 'AC_FUNC_MEMCMP' => 1,
'm4_include' => 1,
'AC_HEADER_DIRENT' => 1,
'AC_CHECK_FUNCS' => 1
m4trace:configure.in:2: -1- AC_SUBST([infodir], ['${prefix}/info'])
m4trace:configure.in:2: -1- AC_SUBST([mandir], ['${prefix}/man'])
m4trace:configure.in:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME])
-m4trace:configure.in:2: -1- AH_OUTPUT([PACKAGE_NAME], [/*
- Define to the full name of this package.
- */
+m4trace:configure.in:2: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */
#undef PACKAGE_NAME])
m4trace:configure.in:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME])
-m4trace:configure.in:2: -1- AH_OUTPUT([PACKAGE_TARNAME], [/*
- Define to the one symbol short name of
- this package. */
+m4trace:configure.in:2: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME])
m4trace:configure.in:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION])
-m4trace:configure.in:2: -1- AH_OUTPUT([PACKAGE_VERSION], [/*
- Define to the version of this package. */
+m4trace:configure.in:2: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */
#undef PACKAGE_VERSION])
m4trace:configure.in:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING])
-m4trace:configure.in:2: -1- AH_OUTPUT([PACKAGE_STRING], [/*
- Define to the full name and version of
- this package. */
+m4trace:configure.in:2: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */
#undef PACKAGE_STRING])
m4trace:configure.in:2: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT])
-m4trace:configure.in:2: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/*
- Define to the address where bug reports for
- this package should be sent. */
+m4trace:configure.in:2: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT])
m4trace:configure.in:2: -1- AC_SUBST([build_alias])
m4trace:configure.in:2: -1- AC_SUBST([host_alias])
m4trace:configure.in:2: -1- AC_SUBST([ECHO_N])
m4trace:configure.in:2: -1- AC_SUBST([ECHO_T])
m4trace:configure.in:2: -1- AC_SUBST([LIBS])
-m4trace:configure.in:4: -2- _m4_warn([syntax], [do not use m4_patsubst: use patsubst or m4_bpatsubst], [aclocal.m4:66: AM_CONFIG_HEADER is expanded from...
+m4trace:configure.in:4: -1- AC_CONFIG_HEADERS([config.h])
+m4trace:configure.in:4: -1- _m4_warn([obsolete], [The macro `AC_OUTPUT_COMMANDS' is obsolete.
+You should run autoupdate.], [autoconf/status.m4:318: AC_OUTPUT_COMMANDS is expanded from...
+aclocal.m4:855: AM_CONFIG_HEADER is expanded from...
+configure.in:4: the top level])
+m4trace:configure.in:4: -3- _m4_warn([obsolete], [The macro `_AC_OUTPUT_COMMANDS_CNT' is obsolete.
+You should run autoupdate.], [autoconf/status.m4:321: _AC_OUTPUT_COMMANDS_CNT is expanded from...
+autoconf/status.m4:318: AC_OUTPUT_COMMANDS is expanded from...
+aclocal.m4:855: AM_CONFIG_HEADER is expanded from...
configure.in:4: the top level])
-m4trace:configure.in:4: -1- AC_CONFIG_HEADERS([config.h], [# update the timestamp
-echo timestamp >"AS_ESCAPE(_AM_DIRNAME(config.h))/stamp-h1"
-])
m4trace:configure.in:5: -1- AM_INIT_AUTOMAKE([psmisc], [21.5cvs])
+m4trace:configure.in:5: -1- AM_AUTOMAKE_VERSION([1.4-p6])
m4trace:configure.in:5: -1- AC_PROG_INSTALL
m4trace:configure.in:5: -1- AC_SUBST([INSTALL_PROGRAM])
m4trace:configure.in:5: -1- AC_SUBST([INSTALL_SCRIPT])
m4trace:configure.in:5: -1- AC_SUBST([INSTALL_DATA])
-m4trace:configure.in:5: -1- _m4_warn([obsolete], [back quotes and double quotes must not be escaped in: $as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first], [aclocal.m4:169: AM_INIT_AUTOMAKE is expanded from...
-configure.in:5: the top level])
-m4trace:configure.in:5: -1- _m4_warn([obsolete], [back quotes and double quotes must not be escaped in: $as_me: error: source directory already configured; run \"make distclean\" there first], [aclocal.m4:169: AM_INIT_AUTOMAKE is expanded from...
-configure.in:5: the top level])
m4trace:configure.in:5: -1- AC_SUBST([PACKAGE])
m4trace:configure.in:5: -1- AC_SUBST([VERSION])
-m4trace:configure.in:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE])
-m4trace:configure.in:5: -1- AH_OUTPUT([PACKAGE], [/*
- Name of package */
+m4trace:configure.in:5: -2- AC_DEFINE_TRACE_LITERAL([PACKAGE])
+m4trace:configure.in:5: -2- AH_OUTPUT([PACKAGE], [/* Name of package */
#undef PACKAGE])
-m4trace:configure.in:5: -1- AC_DEFINE_TRACE_LITERAL([VERSION])
-m4trace:configure.in:5: -1- AH_OUTPUT([VERSION], [/*
- Version number of package */
+m4trace:configure.in:5: -2- AC_DEFINE_TRACE_LITERAL([VERSION])
+m4trace:configure.in:5: -2- AH_OUTPUT([VERSION], [/* Version number of package */
#undef VERSION])
-m4trace:configure.in:5: -1- m4_pattern_allow([^AM_[A-Z]+FLAGS])
-m4trace:configure.in:5: -1- AC_SUBST([EXEEXT])
-m4trace:configure.in:5: -1- AC_SUBST([OBJEXT])
m4trace:configure.in:5: -1- AC_SUBST([ACLOCAL])
m4trace:configure.in:5: -1- AC_SUBST([AUTOCONF])
m4trace:configure.in:5: -1- AC_SUBST([AUTOMAKE])
m4trace:configure.in:5: -1- AC_SUBST([AUTOHEADER])
m4trace:configure.in:5: -1- AC_SUBST([MAKEINFO])
-m4trace:configure.in:5: -1- AC_SUBST([AMTAR])
-m4trace:configure.in:5: -1- AC_SUBST([install_sh])
-m4trace:configure.in:5: -1- AC_SUBST([INSTALL_STRIP_PROGRAM])
-m4trace:configure.in:5: -1- AC_PROG_AWK
-m4trace:configure.in:5: -1- AC_SUBST([AWK])
m4trace:configure.in:5: -1- AC_PROG_MAKE_SET
m4trace:configure.in:5: -1- AC_SUBST([SET_MAKE])
-m4trace:configure.in:5: -1- AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-m4trace:configure.in:5: -1- AC_SUBST([AMDEP_TRUE])
-m4trace:configure.in:5: -1- AC_SUBST([AMDEP_FALSE])
-m4trace:configure.in:5: -1- AC_SUBST([DEPDIR])
m4trace:configure.in:8: -1- AC_PROG_CC
m4trace:configure.in:8: -1- AC_SUBST([CC])
m4trace:configure.in:8: -1- AC_SUBST([CFLAGS])
m4trace:configure.in:8: -1- AC_SUBST([ac_ct_CC])
m4trace:configure.in:8: -1- AC_SUBST([EXEEXT], [$ac_cv_exeext])
m4trace:configure.in:8: -1- AC_SUBST([OBJEXT], [$ac_cv_objext])
-m4trace:configure.in:8: -1- _m4_warn([obsolete], [The macro `AC_OUTPUT_COMMANDS' is obsolete.
-You should run autoupdate.], [autoconf/status.m4:318: AC_OUTPUT_COMMANDS is expanded from...
-aclocal.m4:491: AM_OUTPUT_DEPENDENCY_COMMANDS is expanded from...
-configure.in:8: AM_OUTPUT_DEPENDENCY_COMMANDS is required by...
-aclocal.m4:405: _AM_DEPENDENCIES is expanded from...
-configure.in:8: the top level])
-m4trace:configure.in:8: -3- _m4_warn([obsolete], [The macro `_AC_OUTPUT_COMMANDS_CNT' is obsolete.
-You should run autoupdate.], [autoconf/status.m4:321: _AC_OUTPUT_COMMANDS_CNT is expanded from...
-autoconf/status.m4:318: AC_OUTPUT_COMMANDS is expanded from...
-aclocal.m4:491: AM_OUTPUT_DEPENDENCY_COMMANDS is expanded from...
-configure.in:8: AM_OUTPUT_DEPENDENCY_COMMANDS is required by...
-aclocal.m4:405: _AM_DEPENDENCIES is expanded from...
-configure.in:8: the top level])
-m4trace:configure.in:8: -1- AC_SUBST([am__include])
-m4trace:configure.in:8: -1- AC_SUBST([am__quote])
-m4trace:configure.in:8: -1- AC_SUBST([CCDEPMODE])
m4trace:configure.in:9: -1- AC_PROG_CPP
m4trace:configure.in:9: -1- AC_SUBST([CPP])
m4trace:configure.in:9: -1- AC_SUBST([CPPFLAGS])
m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
autoconf/general.m4:1303: AC_ARG_ENABLE is expanded from...
-aclocal.m4:2316: AC_ENABLE_SHARED is expanded from...
+aclocal.m4:2727: AC_ENABLE_SHARED is expanded from...
configure.in:10: AC_ENABLE_SHARED is required by...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
autoconf/general.m4:1303: AC_ARG_ENABLE is expanded from...
-aclocal.m4:2355: AC_ENABLE_STATIC is expanded from...
+aclocal.m4:2766: AC_ENABLE_STATIC is expanded from...
configure.in:10: AC_ENABLE_STATIC is required by...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
autoconf/general.m4:1303: AC_ARG_ENABLE is expanded from...
-aclocal.m4:2394: AC_ENABLE_FAST_INSTALL is expanded from...
+aclocal.m4:2805: AC_ENABLE_FAST_INSTALL is expanded from...
configure.in:10: AC_ENABLE_FAST_INSTALL is required by...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- AC_CANONICAL_HOST
m4trace:configure.in:10: -1- AC_SUBST([build], [$ac_cv_build])
m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
-aclocal.m4:2591: AC_PROG_LD is expanded from...
+aclocal.m4:3002: AC_PROG_LD is expanded from...
configure.in:10: AC_PROG_LD is required by...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- AC_SUBST([EGREP])
m4trace:configure.in:10: -1- AC_PROG_LN_S
m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
autoconf/general.m4:1303: AC_ARG_ENABLE is expanded from...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete.
You should run autoupdate.], [autoconf/general.m4:2223: AC_TRY_LINK is expanded from...
autoconf/general.m4:1799: AC_CACHE_VAL is expanded from...
autoconf/general.m4:1808: AC_CACHE_CHECK is expanded from...
-aclocal.m4:1098: _LT_AC_LOCK is expanded from...
+aclocal.m4:1516: _LT_AC_LOCK is expanded from...
configure.in:10: _LT_AC_LOCK is required by...
-aclocal.m4:1536: AC_LIBTOOL_SYS_HARD_LINK_LOCKS is expanded from...
-aclocal.m4:3138: _LT_AC_LANG_C_CONFIG is expanded from...
-aclocal.m4:3005: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:1947: AC_LIBTOOL_SYS_HARD_LINK_LOCKS is expanded from...
+aclocal.m4:3549: _LT_AC_LANG_C_CONFIG is expanded from...
+aclocal.m4:3416: AC_LIBTOOL_LANG_C_CONFIG is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- AC_CHECK_HEADERS([dlfcn.h])
-m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_DLFCN_H], [/*
- Define to 1 if you have the <dlfcn.h>
- header file. */
+m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_DLFCN_H], [/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H])
m4trace:configure.in:10: -1- AC_HEADER_STDC
m4trace:configure.in:10: -1- AC_DEFINE_TRACE_LITERAL([STDC_HEADERS])
-m4trace:configure.in:10: -1- AH_OUTPUT([STDC_HEADERS], [/*
- Define to 1 if you have the ANSI
- C header files. */
+m4trace:configure.in:10: -1- AH_OUTPUT([STDC_HEADERS], [/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS])
m4trace:configure.in:10: -1- AC_CHECK_HEADERS([sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
inttypes.h stdint.h unistd.h], [], [], [$ac_includes_default])
-m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_SYS_TYPES_H], [/*
- Define to 1 if you have the <sys/types.h>
- header file. */
+m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_SYS_TYPES_H], [/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H])
-m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_SYS_STAT_H], [/*
- Define to 1 if you have the <sys/stat.h>
- header file. */
+m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_SYS_STAT_H], [/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H])
-m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_STDLIB_H], [/*
- Define to 1 if you have the <stdlib.h>
- header file. */
+m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_STDLIB_H], [/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H])
-m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_STRING_H], [/*
- Define to 1 if you have the <string.h>
- header file. */
+m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_STRING_H], [/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H])
-m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_MEMORY_H], [/*
- Define to 1 if you have the <memory.h>
- header file. */
+m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_MEMORY_H], [/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H])
-m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_STRINGS_H], [/*
- Define to 1 if you have the <strings.h>
- header file. */
+m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_STRINGS_H], [/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H])
-m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_INTTYPES_H], [/*
- Define to 1 if you have the <inttypes.h>
- header file. */
+m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_INTTYPES_H], [/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H])
-m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_STDINT_H], [/*
- Define to 1 if you have the <stdint.h>
- header file. */
+m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_STDINT_H], [/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H])
-m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_UNISTD_H], [/*
- Define to 1 if you have the <unistd.h>
- header file. */
+m4trace:configure.in:10: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H])
m4trace:configure.in:10: -1- AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [
lt_cv_dlopen="dyld"
m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_HELP_STRING' is obsolete.
You should run autoupdate.], [autoconf/general.m4:219: AC_HELP_STRING is expanded from...
autoconf/general.m4:1331: AC_ARG_WITH is expanded from...
-aclocal.m4:2270: _LT_AC_TAGCONFIG is expanded from...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:2681: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
-m4trace:configure.in:10: -1- _m4_warn([obsolete], [back quotes and double quotes must not be escaped in: $as_me:$LINENO: error: tag name \"$tagname\" already exists], [aclocal.m4:2270: _LT_AC_TAGCONFIG is expanded from...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+m4trace:configure.in:10: -1- _m4_warn([obsolete], [back quotes and double quotes must not be escaped in: $as_me:$LINENO: error: tag name \"$tagname\" already exists], [aclocal.m4:2681: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
-m4trace:configure.in:10: -1- _m4_warn([obsolete], [back quotes and double quotes must not be escaped in: $as_me: error: tag name \"$tagname\" already exists], [aclocal.m4:2270: _LT_AC_TAGCONFIG is expanded from...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+m4trace:configure.in:10: -1- _m4_warn([obsolete], [back quotes and double quotes must not be escaped in: $as_me: error: tag name \"$tagname\" already exists], [aclocal.m4:2681: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- AC_PROG_CXX
m4trace:configure.in:10: -1- AC_SUBST([CXX])
m4trace:configure.in:10: -1- AC_SUBST([CPPFLAGS])
m4trace:configure.in:10: -1- AC_SUBST([CXX])
m4trace:configure.in:10: -1- AC_SUBST([ac_ct_CXX])
-m4trace:configure.in:10: -1- AC_SUBST([CXXDEPMODE])
m4trace:configure.in:10: -1- AC_SUBST([CXXCPP])
m4trace:configure.in:10: -1- AC_SUBST([CPPFLAGS])
m4trace:configure.in:10: -1- AC_SUBST([CXXCPP])
m4trace:configure.in:10: -1- AC_SUBST([ac_ct_F77])
m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_LANG_SAVE' is obsolete.
You should run autoupdate.], [autoconf/lang.m4:166: AC_LANG_SAVE is expanded from...
-aclocal.m4:4315: _LT_AC_LANG_GCJ_CONFIG is expanded from...
-aclocal.m4:4272: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
-aclocal.m4:2270: _LT_AC_TAGCONFIG is expanded from...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:4726: _LT_AC_LANG_GCJ_CONFIG is expanded from...
+aclocal.m4:4683: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
+aclocal.m4:2681: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- _m4_warn([obsolete], [instead of using `AC_LANG', `AC_LANG_SAVE',
and `AC_LANG_RESTORE', you should use `AC_LANG_PUSH' and `AC_LANG_POP'.], [autoconf/lang.m4:166: AC_LANG_SAVE is expanded from...
-aclocal.m4:4315: _LT_AC_LANG_GCJ_CONFIG is expanded from...
-aclocal.m4:4272: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
-aclocal.m4:2270: _LT_AC_TAGCONFIG is expanded from...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:4726: _LT_AC_LANG_GCJ_CONFIG is expanded from...
+aclocal.m4:4683: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
+aclocal.m4:2681: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [
lt_cv_dlopen="dyld"
m4trace:configure.in:10: -1- AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_LANG_RESTORE' is obsolete.
You should run autoupdate.], [autoconf/lang.m4:172: AC_LANG_RESTORE is expanded from...
-aclocal.m4:4315: _LT_AC_LANG_GCJ_CONFIG is expanded from...
-aclocal.m4:4272: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
-aclocal.m4:2270: _LT_AC_TAGCONFIG is expanded from...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:4726: _LT_AC_LANG_GCJ_CONFIG is expanded from...
+aclocal.m4:4683: AC_LIBTOOL_LANG_GCJ_CONFIG is expanded from...
+aclocal.m4:2681: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_LANG_SAVE' is obsolete.
You should run autoupdate.], [autoconf/lang.m4:166: AC_LANG_SAVE is expanded from...
-aclocal.m4:4354: _LT_AC_LANG_RC_CONFIG is expanded from...
-aclocal.m4:4323: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
-aclocal.m4:2270: _LT_AC_TAGCONFIG is expanded from...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:4765: _LT_AC_LANG_RC_CONFIG is expanded from...
+aclocal.m4:4734: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
+aclocal.m4:2681: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- _m4_warn([obsolete], [instead of using `AC_LANG', `AC_LANG_SAVE',
and `AC_LANG_RESTORE', you should use `AC_LANG_PUSH' and `AC_LANG_POP'.], [autoconf/lang.m4:166: AC_LANG_SAVE is expanded from...
-aclocal.m4:4354: _LT_AC_LANG_RC_CONFIG is expanded from...
-aclocal.m4:4323: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
-aclocal.m4:2270: _LT_AC_TAGCONFIG is expanded from...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:4765: _LT_AC_LANG_RC_CONFIG is expanded from...
+aclocal.m4:4734: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
+aclocal.m4:2681: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- _m4_warn([obsolete], [The macro `AC_LANG_RESTORE' is obsolete.
You should run autoupdate.], [autoconf/lang.m4:172: AC_LANG_RESTORE is expanded from...
-aclocal.m4:4354: _LT_AC_LANG_RC_CONFIG is expanded from...
-aclocal.m4:4323: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
-aclocal.m4:2270: _LT_AC_TAGCONFIG is expanded from...
-aclocal.m4:771: AC_LIBTOOL_SETUP is expanded from...
+aclocal.m4:4765: _LT_AC_LANG_RC_CONFIG is expanded from...
+aclocal.m4:4734: AC_LIBTOOL_LANG_RC_CONFIG is expanded from...
+aclocal.m4:2681: _LT_AC_TAGCONFIG is expanded from...
+aclocal.m4:1189: AC_LIBTOOL_SETUP is expanded from...
configure.in:10: AC_LIBTOOL_SETUP is required by...
-aclocal.m4:629: _AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1047: _AC_PROG_LIBTOOL is expanded from...
configure.in:10: _AC_PROG_LIBTOOL is required by...
-aclocal.m4:609: AC_PROG_LIBTOOL is expanded from...
+aclocal.m4:1027: AC_PROG_LIBTOOL is expanded from...
configure.in:10: the top level])
m4trace:configure.in:10: -1- AC_SUBST([LIBTOOL])
m4trace:configure.in:13: -1- AC_SUBST([FLASK_LINUX])
m4trace:configure.in:15: -2- AC_DEFINE_TRACE_LITERAL([FLASK_LINUX])
-m4trace:configure.in:15: -2- AH_OUTPUT([FLASK_LINUX], [/*
- Use Security-Enhanced Linux features */
+m4trace:configure.in:15: -2- AH_OUTPUT([FLASK_LINUX], [/* Use Security-Enhanced Linux features */
#undef FLASK_LINUX])
m4trace:configure.in:18: -2- AC_CHECK_LIB([secure], [avc_toggle], [FLASK_LIB=-lsecure], [{ { echo "$as_me:$LINENO: error: Cannot find selinux/ secure static library" >&5
echo "$as_me: error: Cannot find selinux/ secure static library" >&2;}
])
m4trace:configure.in:26: -1- AC_SUBST([TERMCAP_LIB])
m4trace:configure.in:29: -1- AC_HEADER_DIRENT
-m4trace:configure.in:29: -1- AH_OUTPUT([HAVE_DIRENT_H], [/*
- Define to 1 if you have the <dirent.h>
- header file, and it defines `DIR\'. */
+m4trace:configure.in:29: -1- AH_OUTPUT([HAVE_DIRENT_H], [/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR\'.
+ */
#undef HAVE_DIRENT_H])
-m4trace:configure.in:29: -1- AH_OUTPUT([HAVE_SYS_NDIR_H], [/*
- Define to 1 if you have the <sys/ndir.h>
- header file, and it defines `DIR\'. */
+m4trace:configure.in:29: -1- AH_OUTPUT([HAVE_SYS_NDIR_H], [/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR\'.
+ */
#undef HAVE_SYS_NDIR_H])
-m4trace:configure.in:29: -1- AH_OUTPUT([HAVE_SYS_DIR_H], [/*
- Define to 1 if you have the <sys/dir.h>
- header file, and it defines `DIR\'. */
+m4trace:configure.in:29: -1- AH_OUTPUT([HAVE_SYS_DIR_H], [/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR\'.
+ */
#undef HAVE_SYS_DIR_H])
-m4trace:configure.in:29: -1- AH_OUTPUT([HAVE_NDIR_H], [/*
- Define to 1 if you have the <ndir.h>
- header file, and it defines `DIR\'. */
+m4trace:configure.in:29: -1- AH_OUTPUT([HAVE_NDIR_H], [/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR\'. */
#undef HAVE_NDIR_H])
m4trace:configure.in:30: -1- AC_HEADER_STDC
m4trace:configure.in:30: -1- AC_DEFINE_TRACE_LITERAL([STDC_HEADERS])
-m4trace:configure.in:30: -1- AH_OUTPUT([STDC_HEADERS], [/*
- Define to 1 if you have the ANSI
- C header files. */
+m4trace:configure.in:30: -1- AH_OUTPUT([STDC_HEADERS], [/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS])
m4trace:configure.in:31: -1- AC_CHECK_HEADERS([fcntl.h limits.h sys/ioctl.h unistd.h termcap.h])
-m4trace:configure.in:31: -1- AH_OUTPUT([HAVE_FCNTL_H], [/*
- Define to 1 if you have the <fcntl.h>
- header file. */
+m4trace:configure.in:31: -1- AH_OUTPUT([HAVE_FCNTL_H], [/* Define to 1 if you have the <fcntl.h> header file. */
#undef HAVE_FCNTL_H])
-m4trace:configure.in:31: -1- AH_OUTPUT([HAVE_LIMITS_H], [/*
- Define to 1 if you have the <limits.h>
- header file. */
+m4trace:configure.in:31: -1- AH_OUTPUT([HAVE_LIMITS_H], [/* Define to 1 if you have the <limits.h> header file. */
#undef HAVE_LIMITS_H])
-m4trace:configure.in:31: -1- AH_OUTPUT([HAVE_SYS_IOCTL_H], [/*
- Define to 1 if you have the <sys/ioctl.h>
- header file. */
+m4trace:configure.in:31: -1- AH_OUTPUT([HAVE_SYS_IOCTL_H], [/* Define to 1 if you have the <sys/ioctl.h> header file. */
#undef HAVE_SYS_IOCTL_H])
-m4trace:configure.in:31: -1- AH_OUTPUT([HAVE_UNISTD_H], [/*
- Define to 1 if you have the <unistd.h>
- header file. */
+m4trace:configure.in:31: -1- AH_OUTPUT([HAVE_UNISTD_H], [/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H])
-m4trace:configure.in:31: -1- AH_OUTPUT([HAVE_TERMCAP_H], [/*
- Define to 1 if you have the <termcap.h>
- header file. */
+m4trace:configure.in:31: -1- AH_OUTPUT([HAVE_TERMCAP_H], [/* Define to 1 if you have the <termcap.h> header file. */
#undef HAVE_TERMCAP_H])
m4trace:configure.in:34: -1- AC_C_CONST
m4trace:configure.in:34: -1- AC_DEFINE_TRACE_LITERAL([const])
-m4trace:configure.in:34: -1- AH_OUTPUT([const], [/*
- Define to empty if `const\' does not conform
- to ANSI C. */
+m4trace:configure.in:34: -1- AH_OUTPUT([const], [/* Define to empty if `const\' does not conform to ANSI C. */
#undef const])
m4trace:configure.in:35: -1- AC_TYPE_PID_T
m4trace:configure.in:35: -1- AC_DEFINE_TRACE_LITERAL([pid_t])
-m4trace:configure.in:35: -1- AH_OUTPUT([pid_t], [/*
- Define to `int\' if <sys/types.h> does not define.
- */
+m4trace:configure.in:35: -1- AH_OUTPUT([pid_t], [/* Define to `int\' if <sys/types.h> does not define. */
#undef pid_t])
m4trace:configure.in:36: -1- AC_TYPE_SIZE_T
m4trace:configure.in:36: -1- AC_DEFINE_TRACE_LITERAL([size_t])
-m4trace:configure.in:36: -1- AH_OUTPUT([size_t], [/*
- Define to `unsigned\' if <sys/types.h> does not define.
- */
+m4trace:configure.in:36: -1- AH_OUTPUT([size_t], [/* Define to `unsigned\' if <sys/types.h> does not define. */
#undef size_t])
m4trace:configure.in:40: -1- _m4_warn([obsolete], [AC_STRUCT_ST_RDEV:
your code should no longer depend upon `HAVE_ST_RDEV', but
Deprecated, use `HAVE_STRUCT_STAT_ST_RDEV'
instead.])])
m4trace:configure.in:44: -1- AC_DEFINE_TRACE_LITERAL([HAVE_STRUCT_STAT_ST_RDEV])
-m4trace:configure.in:44: -1- AH_OUTPUT([HAVE_STRUCT_STAT_ST_RDEV], [/*
- Define to 1 if `st_rdev\' is member of
- `struct stat\'. */
+m4trace:configure.in:44: -1- AH_OUTPUT([HAVE_STRUCT_STAT_ST_RDEV], [/* Define to 1 if `st_rdev\' is member of `struct stat\'. */
#undef HAVE_STRUCT_STAT_ST_RDEV])
m4trace:configure.in:44: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ST_RDEV])
-m4trace:configure.in:44: -1- AH_OUTPUT([HAVE_ST_RDEV], [/*
- Define to 1 if your `struct stat\' has
- `st_rdev\'. Deprecated, use `HAVE_STRUCT_STAT_ST_RDEV\' instead. */
+m4trace:configure.in:44: -1- AH_OUTPUT([HAVE_ST_RDEV], [/* Define to 1 if your `struct stat\' has `st_rdev\'. Deprecated, use
+ `HAVE_STRUCT_STAT_ST_RDEV\' instead. */
#undef HAVE_ST_RDEV])
m4trace:configure.in:46: -1- AC_TYPE_UID_T
m4trace:configure.in:46: -1- AC_DEFINE_TRACE_LITERAL([uid_t])
-m4trace:configure.in:46: -1- AH_OUTPUT([uid_t], [/*
- Define to `int\' if <sys/types.h> doesn\'t define. */
+m4trace:configure.in:46: -1- AH_OUTPUT([uid_t], [/* Define to `int\' if <sys/types.h> doesn\'t define. */
#undef uid_t])
m4trace:configure.in:46: -1- AC_DEFINE_TRACE_LITERAL([gid_t])
-m4trace:configure.in:46: -1- AH_OUTPUT([gid_t], [/*
- Define to `int\' if <sys/types.h> doesn\'t define. */
+m4trace:configure.in:46: -1- AH_OUTPUT([gid_t], [/* Define to `int\' if <sys/types.h> doesn\'t define. */
#undef gid_t])
m4trace:configure.in:49: -1- AC_SUBST([INO_T_IS_LONG_LONG])
m4trace:configure.in:50: -1- AC_SUBST([INO_T_IS_INT])
-m4trace:configure.in:51: -1- _m4_warn([cross], [AC_RUN_IFELSE called without default to allow cross compiling], [autoconf/general.m4:2281: AC_RUN_IFELSE is expanded from...
-autoconf/general.m4:1799: AC_CACHE_VAL is expanded from...
-autoconf/general.m4:1808: AC_CACHE_CHECK is expanded from...
-autoconf/types.m4:405: AC_CHECK_SIZEOF is expanded from...
-configure.in:51: the top level])
m4trace:configure.in:51: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_INO_T])
-m4trace:configure.in:51: -1- AH_OUTPUT([SIZEOF_INO_T], [/*
- The size of a `ino_t\', as computed by
- sizeof. */
+m4trace:configure.in:51: -1- AH_OUTPUT([SIZEOF_INO_T], [/* The size of a `ino_t\', as computed by sizeof. */
#undef SIZEOF_INO_T])
-m4trace:configure.in:52: -1- _m4_warn([cross], [AC_RUN_IFELSE called without default to allow cross compiling], [autoconf/general.m4:2281: AC_RUN_IFELSE is expanded from...
-autoconf/general.m4:1799: AC_CACHE_VAL is expanded from...
-autoconf/general.m4:1808: AC_CACHE_CHECK is expanded from...
-autoconf/types.m4:405: AC_CHECK_SIZEOF is expanded from...
-configure.in:52: the top level])
m4trace:configure.in:52: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_INT])
-m4trace:configure.in:52: -1- AH_OUTPUT([SIZEOF_INT], [/*
- The size of a `int\', as computed by
- sizeof. */
+m4trace:configure.in:52: -1- AH_OUTPUT([SIZEOF_INT], [/* The size of a `int\', as computed by sizeof. */
#undef SIZEOF_INT])
-m4trace:configure.in:53: -1- _m4_warn([cross], [AC_RUN_IFELSE called without default to allow cross compiling], [autoconf/general.m4:2281: AC_RUN_IFELSE is expanded from...
-autoconf/general.m4:1799: AC_CACHE_VAL is expanded from...
-autoconf/general.m4:1808: AC_CACHE_CHECK is expanded from...
-autoconf/types.m4:405: AC_CHECK_SIZEOF is expanded from...
-configure.in:53: the top level])
m4trace:configure.in:53: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_LONG])
-m4trace:configure.in:53: -1- AH_OUTPUT([SIZEOF_LONG], [/*
- The size of a `long\', as computed by
- sizeof. */
+m4trace:configure.in:53: -1- AH_OUTPUT([SIZEOF_LONG], [/* The size of a `long\', as computed by sizeof. */
#undef SIZEOF_LONG])
-m4trace:configure.in:54: -1- _m4_warn([cross], [AC_RUN_IFELSE called without default to allow cross compiling], [autoconf/general.m4:2281: AC_RUN_IFELSE is expanded from...
-autoconf/general.m4:1799: AC_CACHE_VAL is expanded from...
-autoconf/general.m4:1808: AC_CACHE_CHECK is expanded from...
-autoconf/types.m4:405: AC_CHECK_SIZEOF is expanded from...
-configure.in:54: the top level])
m4trace:configure.in:54: -1- AC_DEFINE_TRACE_LITERAL([SIZEOF_LONG_LONG])
-m4trace:configure.in:54: -1- AH_OUTPUT([SIZEOF_LONG_LONG], [/*
- The size of a `long long\', as computed
- by sizeof. */
+m4trace:configure.in:54: -1- AH_OUTPUT([SIZEOF_LONG_LONG], [/* The size of a `long long\', as computed by sizeof. */
#undef SIZEOF_LONG_LONG])
m4trace:configure.in:57: -1- AC_DEFINE_TRACE_LITERAL([INO_T_IS_INT])
-m4trace:configure.in:57: -1- AH_OUTPUT([INO_T_IS_INT], [/*
- Define to 1 if ino_t type is int
- */
+m4trace:configure.in:57: -1- AH_OUTPUT([INO_T_IS_INT], [/* Define to 1 if ino_t type is int */
#undef INO_T_IS_INT])
m4trace:configure.in:64: -1- AC_DEFINE_TRACE_LITERAL([INO_T_IS_LONG_LONG])
-m4trace:configure.in:64: -1- AH_OUTPUT([INO_T_IS_LONG_LONG], [/*
- Define to 1 if ino_t type is long
- long */
+m4trace:configure.in:64: -1- AH_OUTPUT([INO_T_IS_LONG_LONG], [/* Define to 1 if ino_t type is long long */
#undef INO_T_IS_LONG_LONG])
m4trace:configure.in:70: -1- AM_GNU_GETTEXT([external])
m4trace:configure.in:70: -1- AC_SUBST([MKINSTALLDIRS])
m4trace:configure.in:70: -1- AC_SUBST([MSGMERGE])
m4trace:configure.in:70: -1- _m4_warn([obsolete], [The macro `AC_OUTPUT_COMMANDS' is obsolete.
You should run autoupdate.], [autoconf/status.m4:318: AC_OUTPUT_COMMANDS is expanded from...
-aclocal.m4:7080: AM_PO_SUBDIRS is expanded from...
+aclocal.m4:7571: AM_PO_SUBDIRS is expanded from...
configure.in:70: AM_PO_SUBDIRS is required by...
-aclocal.m4:6808: AM_GNU_GETTEXT is expanded from...
+aclocal.m4:7219: AM_GNU_GETTEXT is expanded from...
configure.in:70: the top level])
m4trace:configure.in:70: -1- AC_SUBST([USE_NLS])
m4trace:configure.in:70: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete.
You should run autoupdate.], [autoconf/general.m4:2223: AC_TRY_LINK is expanded from...
autoconf/general.m4:1799: AC_CACHE_VAL is expanded from...
autoconf/general.m4:1808: AC_CACHE_CHECK is expanded from...
-aclocal.m4:6808: AM_GNU_GETTEXT is expanded from...
+aclocal.m4:7219: AM_GNU_GETTEXT is expanded from...
configure.in:70: the top level])
m4trace:configure.in:70: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete.
You should run autoupdate.], [autoconf/general.m4:2223: AC_TRY_LINK is expanded from...
autoconf/general.m4:1799: AC_CACHE_VAL is expanded from...
autoconf/general.m4:1808: AC_CACHE_CHECK is expanded from...
-aclocal.m4:8117: AM_ICONV_LINK is expanded from...
-aclocal.m4:6808: AM_GNU_GETTEXT is expanded from...
+aclocal.m4:8010: AM_ICONV_LINK is expanded from...
+aclocal.m4:7219: AM_GNU_GETTEXT is expanded from...
configure.in:70: the top level])
m4trace:configure.in:70: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete.
You should run autoupdate.], [autoconf/general.m4:2223: AC_TRY_LINK is expanded from...
autoconf/general.m4:1799: AC_CACHE_VAL is expanded from...
autoconf/general.m4:1808: AC_CACHE_CHECK is expanded from...
-aclocal.m4:8117: AM_ICONV_LINK is expanded from...
-aclocal.m4:6808: AM_GNU_GETTEXT is expanded from...
+aclocal.m4:8010: AM_ICONV_LINK is expanded from...
+aclocal.m4:7219: AM_GNU_GETTEXT is expanded from...
configure.in:70: the top level])
m4trace:configure.in:70: -1- AC_DEFINE_TRACE_LITERAL([HAVE_ICONV])
-m4trace:configure.in:70: -1- AH_OUTPUT([HAVE_ICONV], [/*
- Define if you have the iconv() function. */
+m4trace:configure.in:70: -1- AH_OUTPUT([HAVE_ICONV], [/* Define if you have the iconv() function. */
#undef HAVE_ICONV])
m4trace:configure.in:70: -1- AC_SUBST([LIBICONV])
m4trace:configure.in:70: -1- AC_SUBST([LTLIBICONV])
You should run autoupdate.], [autoconf/general.m4:2223: AC_TRY_LINK is expanded from...
autoconf/general.m4:1799: AC_CACHE_VAL is expanded from...
autoconf/general.m4:1808: AC_CACHE_CHECK is expanded from...
-aclocal.m4:6808: AM_GNU_GETTEXT is expanded from...
+aclocal.m4:7219: AM_GNU_GETTEXT is expanded from...
configure.in:70: the top level])
m4trace:configure.in:70: -1- _m4_warn([obsolete], [The macro `AC_TRY_LINK' is obsolete.
You should run autoupdate.], [autoconf/general.m4:2223: AC_TRY_LINK is expanded from...
autoconf/general.m4:1799: AC_CACHE_VAL is expanded from...
autoconf/general.m4:1808: AC_CACHE_CHECK is expanded from...
-aclocal.m4:6808: AM_GNU_GETTEXT is expanded from...
+aclocal.m4:7219: AM_GNU_GETTEXT is expanded from...
configure.in:70: the top level])
m4trace:configure.in:70: -1- AC_DEFINE_TRACE_LITERAL([ENABLE_NLS])
-m4trace:configure.in:70: -1- AH_OUTPUT([ENABLE_NLS], [/*
- Define to 1 if translation of program messages
- to the user\'s native language is requested. */
+m4trace:configure.in:70: -1- AH_OUTPUT([ENABLE_NLS], [/* Define to 1 if translation of program messages to the user\'s native
+ language is requested. */
#undef ENABLE_NLS])
m4trace:configure.in:70: -1- AC_DEFINE_TRACE_LITERAL([HAVE_GETTEXT])
-m4trace:configure.in:70: -1- AH_OUTPUT([HAVE_GETTEXT], [/*
- Define if the GNU gettext() function is already
- present or preinstalled. */
+m4trace:configure.in:70: -1- AH_OUTPUT([HAVE_GETTEXT], [/* Define if the GNU gettext() function is already present or preinstalled. */
#undef HAVE_GETTEXT])
m4trace:configure.in:70: -1- AC_DEFINE_TRACE_LITERAL([HAVE_DCGETTEXT])
-m4trace:configure.in:70: -1- AH_OUTPUT([HAVE_DCGETTEXT], [/*
- Define if the GNU dcgettext() function is already
- present or preinstalled. */
+m4trace:configure.in:70: -1- AH_OUTPUT([HAVE_DCGETTEXT], [/* Define if the GNU dcgettext() function is already present or preinstalled.
+ */
#undef HAVE_DCGETTEXT])
m4trace:configure.in:70: -1- AC_SUBST([INTLLIBS])
m4trace:configure.in:70: -1- AC_SUBST([LIBINTL])
m4trace:configure.in:70: -1- AC_SUBST([LTLIBINTL])
m4trace:configure.in:70: -1- AC_SUBST([POSUB])
m4trace:configure.in:73: -1- AC_CHECK_FUNCS([strdup strerror strtoul])
-m4trace:configure.in:73: -1- AH_OUTPUT([HAVE_STRDUP], [/*
- Define to 1 if you have the `strdup\'
- function. */
+m4trace:configure.in:73: -1- AH_OUTPUT([HAVE_STRDUP], [/* Define to 1 if you have the `strdup\' function. */
#undef HAVE_STRDUP])
-m4trace:configure.in:73: -1- AH_OUTPUT([HAVE_STRERROR], [/*
- Define to 1 if you have the `strerror\'
- function. */
+m4trace:configure.in:73: -1- AH_OUTPUT([HAVE_STRERROR], [/* Define to 1 if you have the `strerror\' function. */
#undef HAVE_STRERROR])
-m4trace:configure.in:73: -1- AH_OUTPUT([HAVE_STRTOUL], [/*
- Define to 1 if you have the `strtoul\'
- function. */
+m4trace:configure.in:73: -1- AH_OUTPUT([HAVE_STRTOUL], [/* Define to 1 if you have the `strtoul\' function. */
#undef HAVE_STRTOUL])
m4trace:configure.in:76: -1- AC_DEFINE_TRACE_LITERAL([_FILE_OFFSET_BITS])
-m4trace:configure.in:76: -1- AH_OUTPUT([_FILE_OFFSET_BITS], [/*
- Number of bits in a file offset, on
- hosts where this is settable. */
+m4trace:configure.in:76: -1- AH_OUTPUT([_FILE_OFFSET_BITS], [/* Number of bits in a file offset, on hosts where this is settable. */
#undef _FILE_OFFSET_BITS])
m4trace:configure.in:76: -1- AC_DEFINE_TRACE_LITERAL([_LARGE_FILES])
-m4trace:configure.in:76: -1- AH_OUTPUT([_LARGE_FILES], [/*
- Define for large files, on AIX-style hosts. */
+m4trace:configure.in:76: -1- AH_OUTPUT([_LARGE_FILES], [/* Define for large files, on AIX-style hosts. */
#undef _LARGE_FILES])
-m4trace:configure.in:78: -1- AC_CONFIG_FILES([Makefile doc/Makefile src/Makefile po/Makefile.in m4/Makefile icons/Makefile])
+m4trace:configure.in:78: -1- AC_CONFIG_FILES([Makefile doc/Makefile src/Makefile po/Makefile.in icons/Makefile])
m4trace:configure.in:79: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs])
m4trace:configure.in:79: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs])
-m4trace:configure.in:79: -3- _m4_warn([syntax], [do not use m4_regexp: use regexp or m4_bregexp], [aclocal.m4:79: _AM_DIRNAME is expanded from...
-configure.in:79: the top level])
/* config.h.in. Generated from configure.in by autoheader. */
-/*
- Define to 1 if translation of program messages
- to the user's native language is requested. */
+/* Define to 1 if translation of program messages to the user's native
+ language is requested. */
#undef ENABLE_NLS
-/*
- Use Security-Enhanced Linux features */
+/* Use Security-Enhanced Linux features */
#undef FLASK_LINUX
-/*
- Define if the GNU dcgettext() function is already
- present or preinstalled. */
+/* Define if the GNU dcgettext() function is already present or preinstalled.
+ */
#undef HAVE_DCGETTEXT
-/*
- Define to 1 if you have the <dirent.h>
- header file, and it defines `DIR'. */
+/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'.
+ */
#undef HAVE_DIRENT_H
-/*
- Define to 1 if you have the <dlfcn.h>
- header file. */
+/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H
-/*
- Define to 1 if you have the <fcntl.h>
- header file. */
+/* Define to 1 if you have the <fcntl.h> header file. */
#undef HAVE_FCNTL_H
-/*
- Define if the GNU gettext() function is already
- present or preinstalled. */
+/* Define if the GNU gettext() function is already present or preinstalled. */
#undef HAVE_GETTEXT
-/*
- Define if you have the iconv() function. */
+/* Define if you have the iconv() function. */
#undef HAVE_ICONV
-/*
- Define to 1 if you have the <inttypes.h>
- header file. */
+/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
-/*
- Define to 1 if you have the <limits.h>
- header file. */
+/* Define to 1 if you have the <limits.h> header file. */
#undef HAVE_LIMITS_H
-/*
- Define to 1 if you have the <memory.h>
- header file. */
+/* Define to 1 if you have the <memory.h> header file. */
#undef HAVE_MEMORY_H
-/*
- Define to 1 if you have the <ndir.h>
- header file, and it defines `DIR'. */
+/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
#undef HAVE_NDIR_H
-/*
- Define to 1 if you have the <stdint.h>
- header file. */
+/* Define to 1 if you have the <stdint.h> header file. */
#undef HAVE_STDINT_H
-/*
- Define to 1 if you have the <stdlib.h>
- header file. */
+/* Define to 1 if you have the <stdlib.h> header file. */
#undef HAVE_STDLIB_H
-/*
- Define to 1 if you have the `strdup'
- function. */
+/* Define to 1 if you have the `strdup' function. */
#undef HAVE_STRDUP
-/*
- Define to 1 if you have the `strerror'
- function. */
+/* Define to 1 if you have the `strerror' function. */
#undef HAVE_STRERROR
-/*
- Define to 1 if you have the <strings.h>
- header file. */
+/* Define to 1 if you have the <strings.h> header file. */
#undef HAVE_STRINGS_H
-/*
- Define to 1 if you have the <string.h>
- header file. */
+/* Define to 1 if you have the <string.h> header file. */
#undef HAVE_STRING_H
-/*
- Define to 1 if you have the `strtoul'
- function. */
+/* Define to 1 if you have the `strtoul' function. */
#undef HAVE_STRTOUL
-/*
- Define to 1 if `st_rdev' is member of
- `struct stat'. */
+/* Define to 1 if `st_rdev' is member of `struct stat'. */
#undef HAVE_STRUCT_STAT_ST_RDEV
-/*
- Define to 1 if your `struct stat' has
- `st_rdev'. Deprecated, use `HAVE_STRUCT_STAT_ST_RDEV' instead. */
+/* Define to 1 if your `struct stat' has `st_rdev'. Deprecated, use
+ `HAVE_STRUCT_STAT_ST_RDEV' instead. */
#undef HAVE_ST_RDEV
-/*
- Define to 1 if you have the <sys/dir.h>
- header file, and it defines `DIR'. */
+/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
+ */
#undef HAVE_SYS_DIR_H
-/*
- Define to 1 if you have the <sys/ioctl.h>
- header file. */
+/* Define to 1 if you have the <sys/ioctl.h> header file. */
#undef HAVE_SYS_IOCTL_H
-/*
- Define to 1 if you have the <sys/ndir.h>
- header file, and it defines `DIR'. */
+/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
+ */
#undef HAVE_SYS_NDIR_H
-/*
- Define to 1 if you have the <sys/stat.h>
- header file. */
+/* Define to 1 if you have the <sys/stat.h> header file. */
#undef HAVE_SYS_STAT_H
-/*
- Define to 1 if you have the <sys/types.h>
- header file. */
+/* Define to 1 if you have the <sys/types.h> header file. */
#undef HAVE_SYS_TYPES_H
-/*
- Define to 1 if you have the <termcap.h>
- header file. */
+/* Define to 1 if you have the <termcap.h> header file. */
#undef HAVE_TERMCAP_H
-/*
- Define to 1 if you have the <unistd.h>
- header file. */
+/* Define to 1 if you have the <unistd.h> header file. */
#undef HAVE_UNISTD_H
-/*
- Define to 1 if ino_t type is int
- */
+/* Define to 1 if ino_t type is int */
#undef INO_T_IS_INT
-/*
- Define to 1 if ino_t type is long
- long */
+/* Define to 1 if ino_t type is long long */
#undef INO_T_IS_LONG_LONG
-/*
- Name of package */
+/* Name of package */
#undef PACKAGE
-/*
- Define to the address where bug reports for
- this package should be sent. */
+/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
-/*
- Define to the full name of this package.
- */
+/* Define to the full name of this package. */
#undef PACKAGE_NAME
-/*
- Define to the full name and version of
- this package. */
+/* Define to the full name and version of this package. */
#undef PACKAGE_STRING
-/*
- Define to the one symbol short name of
- this package. */
+/* Define to the one symbol short name of this package. */
#undef PACKAGE_TARNAME
-/*
- Define to the version of this package. */
+/* Define to the version of this package. */
#undef PACKAGE_VERSION
-/*
- The size of a `ino_t', as computed by
- sizeof. */
+/* The size of a `ino_t', as computed by sizeof. */
#undef SIZEOF_INO_T
-/*
- The size of a `int', as computed by
- sizeof. */
+/* The size of a `int', as computed by sizeof. */
#undef SIZEOF_INT
-/*
- The size of a `long', as computed by
- sizeof. */
+/* The size of a `long', as computed by sizeof. */
#undef SIZEOF_LONG
-/*
- The size of a `long long', as computed
- by sizeof. */
+/* The size of a `long long', as computed by sizeof. */
#undef SIZEOF_LONG_LONG
-/*
- Define to 1 if you have the ANSI
- C header files. */
+/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
-/*
- Version number of package */
+/* Version number of package */
#undef VERSION
-/*
- Number of bits in a file offset, on
- hosts where this is settable. */
+/* Number of bits in a file offset, on hosts where this is settable. */
#undef _FILE_OFFSET_BITS
-/*
- Define for large files, on AIX-style hosts. */
+/* Define for large files, on AIX-style hosts. */
#undef _LARGE_FILES
-/*
- Define to empty if `const' does not conform
- to ANSI C. */
+/* Define to empty if `const' does not conform to ANSI C. */
#undef const
-/*
- Define to `int' if <sys/types.h> doesn't define. */
+/* Define to `int' if <sys/types.h> doesn't define. */
#undef gid_t
-/*
- Define to `int' if <sys/types.h> does not define.
- */
+/* Define to `int' if <sys/types.h> does not define. */
#undef pid_t
-/*
- Define to `unsigned' if <sys/types.h> does not define.
- */
+/* Define to `unsigned' if <sys/types.h> does not define. */
#undef size_t
-/*
- Define to `int' if <sys/types.h> doesn't define. */
+/* Define to `int' if <sys/types.h> doesn't define. */
#undef uid_t
ld_shlibs=no
;;
beos*)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
netbsd*)
;;
solaris* | sysv5*)
- if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then
+ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
- elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
hardcode_direct=yes
;;
*)
- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
+ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
:
else
ld_shlibs=no
dnl Checks for Large File System
AC_SYS_LARGEFILE
-AC_CONFIG_FILES([Makefile doc/Makefile src/Makefile po/Makefile.in m4/Makefile icons/Makefile])
+AC_CONFIG_FILES([Makefile doc/Makefile src/Makefile po/Makefile.in icons/Makefile m4/Makefile ])
AC_OUTPUT
-# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-@SET_MAKE@
SHELL = @SHELL@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
+
+DESTDIR =
+
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+
top_builddir = ..
ACLOCAL = @ACLOCAL@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
+
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
-AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
-AWK = @AWK@
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CXX = @CXX@
CXXCPP = @CXXCPP@
DATADIRNAME = @DATADIRNAME@
-DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
ECHO = @ECHO@
EGREP = @EGREP@
GENCAT = @GENCAT@
GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
+HAVE_ASPRINTF = @HAVE_ASPRINTF@
HAVE_LIB = @HAVE_LIB@
+HAVE_POSIX_PRINTF = @HAVE_POSIX_PRINTF@
+HAVE_SNPRINTF = @HAVE_SNPRINTF@
+HAVE_WPRINTF = @HAVE_WPRINTF@
INO_T_IS_INT = @INO_T_IS_INT@
INO_T_IS_LONG_LONG = @INO_T_IS_LONG_LONG@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
LTLIB = @LTLIB@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
+MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-am__include = @am__include@
-am__quote = @am__quote@
-install_sh = @install_sh@
man_MANS = fuser.1 killall.1 pstree.1
EXTRA_DIST = $(man_MANS)
-subdir = doc
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES =
+man1dir = $(mandir)/man1
+MANS = $(man_MANS)
NROFF = nroff
-MANS = $(man_MANS)
-DIST_COMMON = Makefile.am Makefile.in
-all: all-am
+DIST_COMMON = Makefile.am Makefile.in
-.SUFFIXES:
-mostlyclean-libtool:
- -rm -f *.lo
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-clean-libtool:
- -rm -rf .libs _libs
+TAR = tar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile
-distclean-libtool:
- -rm -f libtool
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu doc/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && \
- CONFIG_HEADERS= CONFIG_LINKS= \
- CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
-uninstall-info-am:
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-man1dir = $(mandir)/man1
-install-man1: $(man1_MANS) $(man_MANS)
- @$(NORMAL_INSTALL)
+
+install-man1:
$(mkinstalldirs) $(DESTDIR)$(man1dir)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
+ @list='$(man1_MANS)'; \
+ l2='$(man_MANS)'; for i in $$l2; do \
case "$$i" in \
*.1*) list="$$list $$i" ;; \
esac; \
else file=$$i; fi; \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
$(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
done
+
uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
- l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
- for i in $$l2; do \
+ @list='$(man1_MANS)'; \
+ l2='$(man_MANS)'; for i in $$l2; do \
case "$$i" in \
*.1*) list="$$list $$i" ;; \
esac; \
for i in $$list; do \
ext=`echo $$i | sed -e 's/^.*\\.//'`; \
inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
- inst=`echo $$inst | sed -e 's/^.*\///'`; \
inst=`echo $$inst | sed '$(transform)'`.$$ext; \
echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
rm -f $(DESTDIR)$(man1dir)/$$inst; \
done
+install-man: $(MANS)
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-man1
+uninstall-man:
+ @$(NORMAL_UNINSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) uninstall-man1
tags: TAGS
TAGS:
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+subdir = doc
distdir: $(DISTFILES)
+ here=`cd $(top_builddir) && pwd`; \
+ top_distdir=`cd $(top_distdir) && pwd`; \
+ distdir=`cd $(distdir) && pwd`; \
+ cd $(top_srcdir) \
+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/Makefile
@for file in $(DISTFILES); do \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- $(mkinstalldirs) "$(distdir)/$$dir"; \
- fi; \
+ d=$(srcdir); \
if test -d $$d/$$file; then \
- cp -pR $$d/$$file $(distdir) \
- || exit 1; \
+ cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
check-am: all-am
check: check-am
-all-am: Makefile $(MANS)
-
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(man1dir)
-
-install: install-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
install-exec: install-exec-am
+
+install-data-am: install-man
install-data: install-data-am
-uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
+install: install-am
+uninstall-am: uninstall-man
+uninstall: uninstall-am
+all-am: Makefile $(MANS)
+all-redirect: all-am
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(mandir)/man1
+
+
mostlyclean-generic:
clean-generic:
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
+mostlyclean-am: mostlyclean-generic
-distclean-am: clean-am distclean-generic distclean-libtool
-
-dvi: dvi-am
-
-dvi-am:
+mostlyclean: mostlyclean-am
-info: info-am
+clean-am: clean-generic mostlyclean-am
-info-am:
-
-install-data-am: install-man
-
-install-exec-am:
+clean: clean-am
-install-info: install-info-am
+distclean-am: distclean-generic clean-am
+ -rm -f libtool
-install-man: install-man1
+distclean: distclean-am
-installcheck-am:
+maintainer-clean-am: maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-am
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-uninstall-am: uninstall-info-am uninstall-man
-
-uninstall-man: uninstall-man1
+.PHONY: install-man1 uninstall-man1 install-man uninstall-man tags \
+distdir info-am info dvi-am dvi check check-am installcheck-am \
+installcheck install-exec-am install-exec install-data-am install-data \
+install-am install uninstall-am uninstall all-redirect all-am all \
+installdirs mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- distclean distclean-generic distclean-libtool distdir dvi \
- dvi-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-man1 install-strip \
- installcheck installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool uninstall uninstall-am uninstall-info-am \
- uninstall-man uninstall-man1
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
-# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-@SET_MAKE@
SHELL = @SHELL@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
+
+DESTDIR =
+
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+
top_builddir = ..
ACLOCAL = @ACLOCAL@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
+
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
-AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
-AWK = @AWK@
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CXX = @CXX@
CXXCPP = @CXXCPP@
DATADIRNAME = @DATADIRNAME@
-DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
ECHO = @ECHO@
EGREP = @EGREP@
GENCAT = @GENCAT@
GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
+HAVE_ASPRINTF = @HAVE_ASPRINTF@
HAVE_LIB = @HAVE_LIB@
+HAVE_POSIX_PRINTF = @HAVE_POSIX_PRINTF@
+HAVE_SNPRINTF = @HAVE_SNPRINTF@
+HAVE_WPRINTF = @HAVE_WPRINTF@
INO_T_IS_INT = @INO_T_IS_INT@
INO_T_IS_LONG_LONG = @INO_T_IS_LONG_LONG@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
LTLIB = @LTLIB@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
+MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-am__include = @am__include@
-am__quote = @am__quote@
-install_sh = @install_sh@
EXTRA_DIST = psmisc16.gif psmisc32.gif pstree16.xpm pstree32.xpm
-subdir = icons
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-DIST_SOURCES =
-DIST_COMMON = Makefile.am Makefile.in
-all: all-am
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES =
+DIST_COMMON = Makefile.am Makefile.in
-.SUFFIXES:
-mostlyclean-libtool:
- -rm -f *.lo
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
-clean-libtool:
- -rm -rf .libs _libs
+TAR = tar
+GZIP_ENV = --best
+all: all-redirect
+.SUFFIXES:
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu icons/Makefile
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-distclean-libtool:
- -rm -f libtool
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu icons/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- cd $(top_builddir) && \
- CONFIG_HEADERS= CONFIG_LINKS= \
- CONFIG_FILES=$(subdir)/$@ $(SHELL) ./config.status
-uninstall-info-am:
tags: TAGS
TAGS:
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+subdir = icons
distdir: $(DISTFILES)
+ here=`cd $(top_builddir) && pwd`; \
+ top_distdir=`cd $(top_distdir) && pwd`; \
+ distdir=`cd $(distdir) && pwd`; \
+ cd $(top_srcdir) \
+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu icons/Makefile
@for file in $(DISTFILES); do \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- $(mkinstalldirs) "$(distdir)/$$dir"; \
- fi; \
+ d=$(srcdir); \
if test -d $$d/$$file; then \
- cp -pR $$d/$$file $(distdir) \
- || exit 1; \
+ cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
check-am: all-am
check: check-am
-all-am: Makefile
-
-installdirs:
-
-install: install-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am:
install-exec: install-exec-am
+
+install-data-am:
install-data: install-data-am
-uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile
+all-redirect: all-am
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+
+
mostlyclean-generic:
clean-generic:
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
+mostlyclean-am: mostlyclean-generic
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-
-distclean-am: clean-am distclean-generic distclean-libtool
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
+mostlyclean: mostlyclean-am
-install-data-am:
+clean-am: clean-generic mostlyclean-am
-install-exec-am:
+clean: clean-am
-install-info: install-info-am
+distclean-am: distclean-generic clean-am
+ -rm -f libtool
-install-man:
+distclean: distclean-am
-installcheck-am:
+maintainer-clean-am: maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-am
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-uninstall-am: uninstall-info-am
+.PHONY: tags distdir info-am info dvi-am dvi check check-am \
+installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
- distclean distclean-generic distclean-libtool distdir dvi \
- dvi-am info info-am install install-am install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-generic \
- mostlyclean-libtool uninstall uninstall-am uninstall-info-am
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
+2004-04-05 gettextize <bug-gnu-gettext@gnu.org>
+
+ * Makefile.in.in: Upgrade to gettext-0.14.1.
+ * Makevars: Upgrade to gettext-0.14.1.
+ * Rules-quot: Upgrade to gettext-0.14.1.
+
2003-11-28 gettextize <bug-gnu-gettext@gnu.org>
* Makefile.in.in: Upgrade to gettext-0.12.1.
# Makefile for PO directory in any package using GNU gettext.
-# Copyright (C) 1995-1997, 2000-2003 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+# Copyright (C) 1995-1997, 2000-2004 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
#
# This file can be copied and used freely without restrictions. It can
# be used in projects which are not available under the GNU General Public
# functionality.
# Please note that the actual code of GNU gettext is covered by the GNU
# General Public License and is *not* in the public domain.
+#
+# Origin: gettext-0.14
PACKAGE = @PACKAGE@
VERSION = @VERSION@
# Makevars gets inserted here. (Don't remove this line!)
.SUFFIXES:
-.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
.po.mo:
@echo "$(MSGFMT) -c -o $@ $<"; \
# $(POFILES) has been designed to not touch files that don't need to be
# changed.
stamp-po: $(srcdir)/$(DOMAIN).pot
- test -z "$(CATALOGS)" || $(MAKE) $(CATALOGS)
+ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
@echo "touch stamp-po"
@echo timestamp > stamp-poT
@mv stamp-poT stamp-po
# Note that a PO file is not touched if it doesn't need to be changed.
$(POFILES): $(srcdir)/$(DOMAIN).pot
@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
- test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
- echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
- cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot
+ if test -f "$(srcdir)/$${lang}.po"; then \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
+ cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \
+ else \
+ $(MAKE) $${lang}.po-create; \
+ fi
install: install-exec install-data
test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
$(MAKE) update-gmo
+# General rule for creating PO files.
+
+.nop.po-create:
+ @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+ exit 1
+
# General rule for updating PO files.
.nop.po-update:
# their copyright.
COPYRIGHT_HOLDER = Free Software Foundation, Inc.
-# This is the email address or URL to which the translators shall report
-# bugs in the untranslated strings:
-# - Strings which are not entire sentences, see the maintainer guidelines
-# in the GNU gettext documentation, section 'Preparing Strings'.
-# - Strings which use unclear terms or require additional context to be
-# understood.
-# - Strings which make invalid assumptions about notation of date, time or
-# money.
-# - Pluralisation problems.
-# - Incorrect English spelling.
-# - Incorrect formatting.
-# It can be your email address, or a mailing list address where translators
-# can write to without being subscribed, or the URL of a web page through
-# which the translators can contact you.
-MSGID_BUGS_ADDRESS = csmall@small.dropbear.id.au
-
# This is the list of locale categories, beyond LC_MESSAGES, for which the
# message catalogs shall be used. It is usually empty.
EXTRA_LOCALE_CATEGORIES =
# their copyright.
COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+# in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+# understood.
+# - Strings which make invalid assumptions about notation of date, time or
+# money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS =
+
# This is the list of locale categories, beyond LC_MESSAGES, for which the
# message catalogs shall be used. It is usually empty.
EXTRA_LOCALE_CATEGORIES =
.SUFFIXES: .insert-header .po-update-en
+en@quot.po-create:
+ $(MAKE) en@quot.po-update
+en@boldquot.po-create:
+ $(MAKE) en@boldquot.po-update
+
en@quot.po-update: en@quot.po-update-en
en@boldquot.po-update: en@boldquot.po-update-en
-# Makefile.in generated automatically by automake 1.5 from Makefile.am.
+# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am
-# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
-# Free Software Foundation, Inc.
+# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
-@SET_MAKE@
SHELL = @SHELL@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
+
+DESTDIR =
+
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+
top_builddir = ..
ACLOCAL = @ACLOCAL@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
+
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
-AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
-AWK = @AWK@
BUILD_INCLUDED_LIBINTL = @BUILD_INCLUDED_LIBINTL@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CXX = @CXX@
CXXCPP = @CXXCPP@
DATADIRNAME = @DATADIRNAME@
-DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
ECHO = @ECHO@
EGREP = @EGREP@
GENCAT = @GENCAT@
GLIBC21 = @GLIBC21@
GMSGFMT = @GMSGFMT@
+HAVE_ASPRINTF = @HAVE_ASPRINTF@
HAVE_LIB = @HAVE_LIB@
+HAVE_POSIX_PRINTF = @HAVE_POSIX_PRINTF@
+HAVE_SNPRINTF = @HAVE_SNPRINTF@
+HAVE_WPRINTF = @HAVE_WPRINTF@
INO_T_IS_INT = @INO_T_IS_INT@
INO_T_IS_LONG_LONG = @INO_T_IS_LONG_LONG@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
INTLBISON = @INTLBISON@
INTLLIBS = @INTLLIBS@
LTLIB = @LTLIB@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
+MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
-am__include = @am__include@
-am__quote = @am__quote@
-install_sh = @install_sh@
AM_CFLAGS = -Wall -DLOCALEDIR=\"/usr/share/locale\"
EXTRA_DIST = signames.c
CLEANFILES = signames.h pstree.x11
-subdir = src
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-bin_PROGRAMS = fuser$(EXEEXT) killall$(EXEEXT) pstree$(EXEEXT)
-PROGRAMS = $(bin_PROGRAMS)
+CONFIG_HEADER = ../config.h
+CONFIG_CLEAN_FILES =
+bin_PROGRAMS = fuser$(EXEEXT) killall$(EXEEXT) pstree$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
-am_fuser_OBJECTS = fuser.$(OBJEXT) signals.$(OBJEXT)
-fuser_OBJECTS = $(am_fuser_OBJECTS)
-fuser_LDADD = $(LDADD)
-fuser_DEPENDENCIES =
-fuser_LDFLAGS =
-am_killall_OBJECTS = killall.$(OBJEXT) signals.$(OBJEXT)
-killall_OBJECTS = $(am_killall_OBJECTS)
-killall_DEPENDENCIES =
-killall_LDFLAGS =
-am_pstree_OBJECTS = pstree.$(OBJEXT)
-pstree_OBJECTS = $(am_pstree_OBJECTS)
-pstree_DEPENDENCIES =
-pstree_LDFLAGS =
-SCRIPTS = $(bin_SCRIPTS)
-
-
-DEFS = @DEFS@
-DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
+
+DEFS = @DEFS@ -I. -I$(srcdir) -I..
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-@AMDEP_TRUE@DEP_FILES = $(DEPDIR)/fuser.Po $(DEPDIR)/killall.Po \
-@AMDEP_TRUE@ $(DEPDIR)/pstree.Po $(DEPDIR)/signals.Po
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
- $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) \
- $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
- $(AM_LDFLAGS) $(LDFLAGS) -o $@
+fuser_OBJECTS = fuser.$(OBJEXT) signals.$(OBJEXT)
+fuser_LDADD = $(LDADD)
+fuser_DEPENDENCIES =
+fuser_LDFLAGS =
+killall_OBJECTS = killall.$(OBJEXT) signals.$(OBJEXT)
+killall_DEPENDENCIES =
+killall_LDFLAGS =
+pstree_OBJECTS = pstree.$(OBJEXT)
+pstree_DEPENDENCIES =
+pstree_LDFLAGS =
+SCRIPTS = $(bin_SCRIPTS)
+
CFLAGS = @CFLAGS@
-DIST_SOURCES = $(fuser_SOURCES) $(killall_SOURCES) $(pstree_SOURCES)
-DIST_COMMON = Makefile.am Makefile.in
-SOURCES = $(fuser_SOURCES) $(killall_SOURCES) $(pstree_SOURCES)
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON = Makefile.am Makefile.in
+
-all: $(BUILT_SOURCES)
- $(MAKE) $(AM_MAKEFLAGS) all-am
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+TAR = tar
+GZIP_ENV = --best
+DEP_FILES = .deps/fuser.P .deps/killall.P .deps/pstree.P \
+.deps/signals.P
+SOURCES = $(fuser_SOURCES) $(killall_SOURCES) $(pstree_SOURCES)
+OBJECTS = $(fuser_OBJECTS) $(killall_OBJECTS) $(pstree_OBJECTS)
+
+all: all-redirect
.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
+.SUFFIXES: .S .c .lo .o .obj .s
+$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile
-mostlyclean-libtool:
- -rm -f *.lo
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES)
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
-clean-libtool:
- -rm -rf .libs _libs
-distclean-libtool:
- -rm -f libtool
-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu src/Makefile
+mostlyclean-binPROGRAMS:
+
+clean-binPROGRAMS:
+ -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+
+distclean-binPROGRAMS:
+
+maintainer-clean-binPROGRAMS:
+
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(bindir)
@list='$(bin_PROGRAMS)'; for p in $$list; do \
- p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
- if test -f $$p \
- || test -f $$p1 \
- ; then \
- f=`echo $$p1|sed '$(transform);s/$$/$(EXEEXT)/'`; \
- echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f"; \
- $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$f; \
+ if test -f $$p; then \
+ echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
+ $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
else :; fi; \
done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
- @list='$(bin_PROGRAMS)'; for p in $$list; do \
- f=`echo $$p|sed 's/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
- echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
- rm -f $(DESTDIR)$(bindir)/$$f; \
+ list='$(bin_PROGRAMS)'; for p in $$list; do \
+ rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
done
-clean-binPROGRAMS:
- -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-fuser$(EXEEXT): $(fuser_OBJECTS) $(fuser_DEPENDENCIES)
+# FIXME: We should only use cygpath when building on Windows,
+# and only if it is available.
+.c.obj:
+ $(COMPILE) -c `cygpath -w $<`
+
+.s.o:
+ $(COMPILE) -c $<
+
+.S.o:
+ $(COMPILE) -c $<
+
+mostlyclean-compile:
+ -rm -f *.o core *.core
+ -rm -f *.$(OBJEXT)
+
+clean-compile:
+
+distclean-compile:
+ -rm -f *.tab.c
+
+maintainer-clean-compile:
+
+.s.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+.S.lo:
+ $(LIBTOOL) --mode=compile $(COMPILE) -c $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+
+maintainer-clean-libtool:
+
+fuser$(EXEEXT): $(fuser_OBJECTS) $(fuser_DEPENDENCIES)
@rm -f fuser$(EXEEXT)
$(LINK) $(fuser_LDFLAGS) $(fuser_OBJECTS) $(fuser_LDADD) $(LIBS)
-killall$(EXEEXT): $(killall_OBJECTS) $(killall_DEPENDENCIES)
+
+killall$(EXEEXT): $(killall_OBJECTS) $(killall_DEPENDENCIES)
@rm -f killall$(EXEEXT)
$(LINK) $(killall_LDFLAGS) $(killall_OBJECTS) $(killall_LDADD) $(LIBS)
-pstree$(EXEEXT): $(pstree_OBJECTS) $(pstree_DEPENDENCIES)
+
+pstree$(EXEEXT): $(pstree_OBJECTS) $(pstree_DEPENDENCIES)
@rm -f pstree$(EXEEXT)
$(LINK) $(pstree_LDFLAGS) $(pstree_OBJECTS) $(pstree_LDADD) $(LIBS)
+
install-binSCRIPTS: $(bin_SCRIPTS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(bindir)
@list='$(bin_SCRIPTS)'; for p in $$list; do \
- f="`echo $$p|sed '$(transform)'`"; \
if test -f $$p; then \
- echo " $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/$$f"; \
- $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/$$f; \
- elif test -f $(srcdir)/$$p; then \
- echo " $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/$$f"; \
- $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/$$f; \
- else :; fi; \
+ echo " $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`"; \
+ $(INSTALL_SCRIPT) $$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
+ else if test -f $(srcdir)/$$p; then \
+ echo " $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`"; \
+ $(INSTALL_SCRIPT) $(srcdir)/$$p $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
+ else :; fi; fi; \
done
uninstall-binSCRIPTS:
@$(NORMAL_UNINSTALL)
- @list='$(bin_SCRIPTS)'; for p in $$list; do \
- f="`echo $$p|sed '$(transform)'`"; \
- echo " rm -f $(DESTDIR)$(bindir)/$$f"; \
- rm -f $(DESTDIR)$(bindir)/$$f; \
+ list='$(bin_SCRIPTS)'; for p in $$list; do \
+ rm -f $(DESTDIR)$(bindir)/`echo $$p|sed '$(transform)'`; \
done
-mostlyclean-compile:
- -rm -f *.$(OBJEXT) core *.core
-
-distclean-compile:
- -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/fuser.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/killall.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/pstree.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/signals.Po@am__quote@
-
-distclean-depend:
- -rm -rf $(DEPDIR)
-
-.c.o:
-@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- $(COMPILE) -c `test -f $< || echo '$(srcdir)/'`$<
-
-.c.obj:
-@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- $(COMPILE) -c `cygpath -w $<`
-
-.c.lo:
-@AMDEP_TRUE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
- $(LTCOMPILE) -c -o $@ `test -f $< || echo '$(srcdir)/'`$<
-CCDEPMODE = @CCDEPMODE@
-uninstall-info-am:
-
tags: TAGS
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
+ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
- mkid -fID $$unique $(LISP)
+ here=`pwd` && cd $(srcdir) \
+ && mkid -f$$here/ID $$unique $(LISP)
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
- $(TAGS_FILES) $(LISP)
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
- list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
- unique=`for i in $$list; do \
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
- done | \
- $(AWK) ' { files[$$0] = 1; } \
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
- || etags $(ETAGS_ARGS) $$tags $$unique $(LISP)
+ || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP))
+
+mostlyclean-tags:
-GTAGS:
- here=`CDPATH=: && cd $(top_builddir) && pwd` \
- && cd $(top_srcdir) \
- && gtags -i $(GTAGS_ARGS) $$here
+clean-tags:
distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
+ -rm -f TAGS ID
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+maintainer-clean-tags:
-top_distdir = ..
-distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+
+subdir = src
distdir: $(DISTFILES)
+ here=`cd $(top_builddir) && pwd`; \
+ top_distdir=`cd $(top_distdir) && pwd`; \
+ distdir=`cd $(distdir) && pwd`; \
+ cd $(top_srcdir) \
+ && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile
@for file in $(DISTFILES); do \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test "$$dir" != "$$file" && test "$$dir" != "."; then \
- $(mkinstalldirs) "$(distdir)/$$dir"; \
- fi; \
+ d=$(srcdir); \
if test -d $$d/$$file; then \
- cp -pR $$d/$$file $(distdir) \
- || exit 1; \
+ cp -pr $$d/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
- || exit 1; \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS) $(SCRIPTS)
-installdirs:
- $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(bindir)
+DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :)
-install: install-am
+-include $(DEP_FILES)
+
+mostlyclean-depend:
+
+clean-depend:
+
+distclean-depend:
+ -rm -rf .deps
+
+maintainer-clean-depend:
+
+%.o: %.c
+ @echo '$(COMPILE) -c $<'; \
+ $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-cp .deps/$(*F).pp .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm .deps/$(*F).pp
+
+%.lo: %.c
+ @echo '$(LTCOMPILE) -c $<'; \
+ $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $<
+ @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \
+ < .deps/$(*F).pp > .deps/$(*F).P; \
+ tr ' ' '\012' < .deps/$(*F).pp \
+ | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \
+ >> .deps/$(*F).P; \
+ rm -f .deps/$(*F).pp
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am: all-am
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-exec-am: install-binPROGRAMS install-binSCRIPTS
install-exec: install-exec-am
+
+install-data-am:
install-data: install-data-am
-uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
+install: install-am
+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS
+uninstall: uninstall-am
+all-am: Makefile $(PROGRAMS) $(SCRIPTS)
+all-redirect: all-am
install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- `test -z '$(STRIP)' || \
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+ $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(bindir)
+
+
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
- -rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am
+mostlyclean-am: mostlyclean-binPROGRAMS mostlyclean-compile \
+ mostlyclean-libtool mostlyclean-tags mostlyclean-depend \
+ mostlyclean-generic
-distclean: distclean-am
-
-distclean-am: clean-am distclean-compile distclean-depend \
- distclean-generic distclean-libtool distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-info: info-am
-
-info-am:
+mostlyclean: mostlyclean-am
-install-data-am:
+clean-am: clean-binPROGRAMS clean-compile clean-libtool clean-tags \
+ clean-depend clean-generic mostlyclean-am
-install-exec-am: install-binPROGRAMS install-binSCRIPTS
+clean: clean-am
-install-info: install-info-am
+distclean-am: distclean-binPROGRAMS distclean-compile distclean-libtool \
+ distclean-tags distclean-depend distclean-generic \
+ clean-am
+ -rm -f libtool
-install-man:
+distclean: distclean-am
-installcheck-am:
+maintainer-clean-am: maintainer-clean-binPROGRAMS \
+ maintainer-clean-compile maintainer-clean-libtool \
+ maintainer-clean-tags maintainer-clean-depend \
+ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-am
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool
-
-uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
- uninstall-info-am
-
-.PHONY: GTAGS all all-am check check-am clean clean-binPROGRAMS \
- clean-generic clean-libtool distclean distclean-compile \
- distclean-depend distclean-generic distclean-libtool \
- distclean-tags distdir dvi dvi-am info info-am install \
- install-am install-binPROGRAMS install-binSCRIPTS install-data \
- install-data-am install-exec install-exec-am install-info \
- install-info-am install-man install-strip installcheck \
- installcheck-am installdirs maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool tags uninstall \
- uninstall-am uninstall-binPROGRAMS uninstall-binSCRIPTS \
- uninstall-info-am
+.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
+maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile mostlyclean-libtool distclean-libtool \
+clean-libtool maintainer-clean-libtool uninstall-binSCRIPTS \
+install-binSCRIPTS tags mostlyclean-tags distclean-tags clean-tags \
+maintainer-clean-tags distdir mostlyclean-depend distclean-depend \
+clean-depend maintainer-clean-depend info-am info dvi-am dvi check \
+check-am installcheck-am installcheck install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
signames.h: signames.c
pstree.x11: pstree
ln -s pstree pstree.x11
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
projects / psmisc / commitdiff