--- /dev/null
+#!/bin/sh
+# (c) 2010 Quest Software, Inc. All rights reserved
+pp_revision="229M"
+
+ # (c) 2008 Quest Software, Inc. All rights reserved.
+ #
+ # Redistribution and use in source and binary forms, with or without
+ # modification, are permitted provided that the following conditions
+ # are met:
+ #
+ # 1. Redistributions of source code must retain the above copyright
+ # notice, this list of conditions and the following disclaimer.
+ # 2. Redistributions in binary form must reproduce the above copyright
+ # notice, this list of conditions and the following disclaimer in the
+ # documentation and/or other materials provided with the distribution.
+ # 3. Neither the name of Quest Software, Inc. nor the names of its
+ # contributors may be used to endorse or promote products derived from
+ # this software without specific prior written permission.
+ #
+ # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ # TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ # PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ # LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ # NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ # Please see <http://rc.vintela.com/topics/polypkg/> for more information
+
+pp_version="1.0.0.$pp_revision"
+pp_copyright="(c) 2008, Quest Software, Inc. All rights reserved."
+
+pp_opt_debug=false
+pp_opt_destdir="$DESTDIR"
+pp_opt_install_script=
+pp_opt_list=false
+pp_opt_no_clean=false
+pp_opt_no_package=false
+pp_opt_only_front=false
+pp_opt_platform=
+pp_opt_probe=false
+pp_opt_strip=false
+pp_opt_save_unstripped=false
+pp_opt_vas_platforms=false
+pp_opt_wrkdir="`pwd`/pp.work.$$"
+pp_opt_verbose=false
+pp_opt_version=false
+pp_opt_input="-"
+pp_opt_init_vars=""
+pp_opt_eval=
+
+test -n "$PP_NO_CLEAN" && pp_opt_no_clean=true
+test -n "$PP_DEBUG" && pp_opt_debug=true
+test -n "$PP_VERBOSE" && pp_opt_verbose=true
+
+pp_main_cleanup () {
+ pp_debug "main_cleanup"
+ pp_remove_later_now
+ if $pp_opt_no_clean || test x"$pp_platform" = x"unknown"; then
+ : no cleanup
+ else
+ pp_backend_${pp_platform}_cleanup
+ $pp_errors && pp_die "Errors during cleanup"
+ if test -d "$pp_wrkdir"; then
+ if $pp_opt_debug; then
+ pp_debug "not removing $pp_wrkdir"
+ else
+ pp_verbose rm -rf "$pp_wrkdir"
+ fi
+ fi
+ fi
+}
+
+pp_parseopts () {
+ typeset a n _var _val
+ while test $# -gt 0; do
+
+ # convert -[dilpv] to --long-options
+ case "$1" in
+ --?*=?*) n=`echo "$1" | sed -ne 's/^--\([^=]*\)=.*/\1/p'`
+ a=`echo "$1" | sed -ne 's/^--[^=]*=\(.*\)/\1/p'`
+ shift
+ set -- "--$n" "$a" "$@";;
+ --?*) : ;;
+
+ -d) shift; set -- "--debug" "$@";;
+ -d*) a=`echo "$1" | sed -ne 's/^-.//'`
+ shift; set -- "--debug" "$@";;
+
+ -i) shift; set -- "--install-script" "$@";;
+ -i*) a=`echo "$1" | sed -ne 's/^-.//'`
+ shift; set -- "--install-script" "$a" "$@";;
+
+ -l) shift; set -- "--list" "$@";;
+ -l*) a=`echo "$1" | sed -ne 's/^-.//'`
+ shift; set -- "--list" "$@";;
+
+ -p) shift; set -- "--platform" "$@";;
+ -p*) a=`echo "$1" | sed -ne 's/^-.//'`
+ shift; set -- "--platform" "$a" "$@";;
+
+ -v) shift; set -- "--verbose" "$@";;
+ -v*) a=`echo "$1" | sed -ne 's/^-.//'`
+ shift; set -- "--verbose" "$@";;
+
+ -\?) shift; set -- "--help" "$@";;
+ -\?*) a=`echo "$1" | sed -ne 's/^-.//'`
+ shift; set -- "--help" "$@";;
+ esac
+
+ case "$1" in
+ --destdir|--eval|--install-script|--platform|--wrkdir)
+ test $# -ge 2 || pp_error "missing argument to $1";;
+ esac
+
+ case "$1" in
+ --) shift;break;;
+ --debug) pp_opt_debug=true; shift;;
+ --destdir) pp_opt_destdir="$2"; shift;shift;;
+ --eval) pp_opt_eval="$2"; shift;shift;; # undoc
+ --install-script) pp_opt_install_script="$2"; shift;shift;;
+ --list) pp_opt_list=true; shift;;
+ --no-clean) pp_opt_no_clean=true; shift;;
+ --no-package) pp_opt_no_package=true; shift;;
+ --only-front) pp_opt_only_front=true; shift;;
+ --platform) pp_opt_platform="$2"; shift;shift;;
+ --probe) pp_opt_probe=true; shift;;
+ --strip) pp_opt_strip=true; shift;;
+ --save-unstripped) pp_opt_save_unstripped=true; shift;;
+ --wrkdir) pp_opt_wrkdir="$2"; shift;shift;;
+ --vas-platforms) pp_opt_vas_platforms=true; shift;;
+ --verbose) pp_opt_verbose=true; shift;;
+ --version) pp_opt_version=true; shift;;
+ --help) pp_errors=true; shift;;
+ -) break;;
+ -*) pp_error "unknown option $1"; shift;;
+ *) break;;
+ esac
+
+ done
+
+ pp_opt_input=-
+ if test $# -gt 0; then
+ pp_opt_input="$1"
+ shift
+ fi
+
+ #-- extra arguments of the form Foo=bar alter *global* vars
+ while test $# -gt 0; do
+ case "$1" in
+ -*) pp_error "unexpected option '$1'"
+ shift;;
+ *=*) _val="${1#*=}"
+ _var=${1%="$_val"}
+ _val=`echo "$_val"|sed -e 's/[$"\\]/\\&/g'`
+ pp_debug "setting $_var = \"$_val\""
+ pp_opt_init_vars="$pp_opt_init_vars$_var=\"$_val\";"
+ shift;;
+ *) pp_error "unexpected argument $1'"
+ shift;;
+ esac
+ done
+
+ test $# -gt 0 &&
+ pp_error "unknown argument $1"
+
+ if $pp_errors; then
+ cat <<. >&2
+polypkg $pp_version $pp_copyright
+usage: $0 [options] [input.pp] [var=value ...]
+ -d --debug -- write copious info to stderr
+ --destdir=path -- file root, defaults to \$DESTDIR
+ -? --help -- display this information
+ -i --install-script=path -- create an install helper script
+ -l --list -- write package filenames to stdout
+ --no-clean -- don't remove temporary files
+ --no-package -- do everything but create packages
+ --only-front -- only perform front-end actions
+ -p --platform=platform -- defaults to local platform
+ --probe -- print local system identifier, then exit
+ --strip -- strip debug symbols from binaries before
+ packaging (modifies files in destdir)
+ --save-unstripped -- save unstripped binaries to
+ \$name-\$version-unstripped.tar.gz
+ --wrkdir=path -- defaults to subdirectory of \$TMPDIR or /tmp
+ -v --verbose -- write info to stderr
+ --version -- display version and quit
+.
+ exit 1
+ fi
+}
+
+pp_drive () {
+ # initialise the front and back ends
+ pp_model_init
+ pp_frontend_init
+ $pp_opt_only_front || pp_backend_init
+
+ # run the front-end to generate the intermediate files
+ # set $pp_input_dir to be the 'include dir' if needed
+ pp_debug "calling frontend on $pp_opt_input"
+ case "$pp_opt_input" in
+ -) pp_input_dir=.
+ test -t 1<&0 &&
+ pp_warn "reading directives from standard input"
+ pp_frontend
+ ;;
+ */*) pp_input_dir=${pp_opt_input%/*}
+ pp_frontend <"$pp_opt_input"
+ ;;
+ *) pp_input_dir=.
+ pp_frontend <"$pp_opt_input"
+ ;;
+ esac
+
+ pp_files_ignore_others
+ pp_service_scan_groups
+
+ # some sanity checks after front-end processing
+ if test x"$pp_platform" != x"null"; then
+ pp_debug "sanity checks"
+ test -n "$pp_components" || pp_error "No components?"
+ pp_check_var_is_defined "name"
+ pp_check_var_is_defined "version"
+ pp_files_check_duplicates
+ pp_files_check_coverage
+ pp_die_if_errors "Errors during sanity checks"
+ fi
+
+ # stop now if we're only running the front
+ $pp_opt_only_front && return
+
+ if test x"$pp_opt_strip" = x"true"; then
+ pp_strip_binaries
+ fi
+
+ # run the back-end to generate the package
+ pp_debug "calling backend"
+ pp_backend
+ pp_die_if_errors "Errors during backend processing"
+
+ # copy the resulting package files to PP_PKGDESTDIR or .
+ for f in `pp_backend_names` -; do
+ test x"$f" = x"-" && continue
+ pp_debug "copying: $f to `pwd`"
+ if pp_verbose cp $pp_wrkdir/$f ${PP_PKGDESTDIR:-.}; then
+ echo "${PP_PKGDESTDIR:+$PP_PKGDESTDIR/}$f"
+ else
+ pp_error "$f: missing package"
+ fi
+ done
+ pp_die_if_errors "Errors during package copying"
+}
+
+pp_install_script () {
+ pp_debug "writing install script to $pp_opt_install_script"
+ rm -f $pp_opt_install_script
+ pp_backend_install_script > $pp_opt_install_script
+ pp_die_if_errors "Errors during package install script"
+ chmod +x $pp_opt_install_script
+}
+
+pp_main () {
+ # If PP_DEV_PATH is set, then jump to that script.
+ # (Useful when working on polypkg source that isn't installed)
+ if test -n "$PP_DEV_PATH" -a x"$PP_DEV_PATH" != x"$0"; then
+ pp_warn "switching from $0 to $PP_DEV_PATH ..."
+ exec "$PP_DEV_PATH" "$@" || exit 1
+ fi
+
+ pp_set_expand_converter_or_reexec "$@"
+ pp_parseopts "$@"
+
+ if $pp_opt_version; then
+ #-- print version and exit
+ echo "polypkg $pp_version"
+ exit 0
+ fi
+
+ pp_set_platform
+
+ trap 'pp_main_cleanup' 0
+
+ pp_wrkdir="$pp_opt_wrkdir"
+ pp_debug "pp_wrkdir = $pp_wrkdir"
+ rm -rf "$pp_wrkdir"
+ mkdir -p "$pp_wrkdir"
+
+ pp_destdir="$pp_opt_destdir"
+ pp_debug "pp_destdir = $pp_destdir"
+
+ if $pp_opt_probe; then
+ pp_backend_init
+ pp_backend_probe
+ elif $pp_opt_vas_platforms; then
+ pp_backend_init
+ pp_backend_vas_platforms
+ elif test -n "$pp_opt_eval"; then
+ #-- execute a shell command
+ eval "$pp_opt_eval" || exit
+ else
+ pp_drive
+ if test -n "$pp_opt_install_script"; then
+ pp_install_script
+ fi
+ fi
+
+ exit 0
+}
+
+
+pp_errors=false
+
+if test -n "$TERM" -a -t 1 && (tput op) >/dev/null 2>/dev/null; then
+ pp_col_redfg=`tput setf 4` 2>/dev/null
+ pp_col_bluefg=`tput setf 1` 2>/dev/null
+ pp_col_reset=`tput op` 2>/dev/null
+else
+ pp_col_redfg='['
+ pp_col_bluefg='['
+ pp_col_reset=']'
+fi
+
+pp__warn () {
+ if test x"" = x"$pp_lineno"; then
+ echo "$1 $2" >&2
+ else
+ echo "$1 line $pp_lineno: $2" >&2
+ fi
+}
+
+pp_warn () {
+ pp__warn "pp: ${pp_col_redfg}warning${pp_col_reset}" "$*"
+}
+
+pp_error () {
+ pp__warn "pp: ${pp_col_redfg}error${pp_col_reset}" "$*"
+ pp_errors=true
+}
+
+pp_die () {
+ pp_error "$@"
+ exit 1
+}
+
+pp_die_if_errors () {
+ $pp_errors && pp_die "$@"
+}
+
+pp_debug () {
+ $pp_opt_debug && echo "${pp_col_bluefg}debug${pp_col_reset} $*" >&2
+}
+
+pp_verbose () {
+ $pp_opt_verbose && echo "pp: ${pp_col_bluefg}info${pp_col_reset} $*" >&2
+ "$@";
+}
+
+pp_substitute () {
+ sed -e 's,%(\([^)]*\)),\16\15`\1`\16,g' \
+ -e 's,%{\([^}]*\)},\16\15${\1}\16,g' \
+ -e 's,$,\17,' |
+ tr '\16' '\012' |
+ sed -e '/^[^\15]/s/["$`\\]/\\&/g' \
+ -e 's/^\15//' \
+ -e '1s/^/echo "/' \
+ -e '$s,\17$,",' \
+ -e 's,\17,"\16echo ",g' |
+ tr -d '\012' |
+ tr '\16' '\012'
+ echo
+}
+
+pp_incr () {
+ eval "$1=\`expr \$$1 + 1\`"
+}
+
+pp_decr () {
+ eval "$1=\`expr \$$1 - 1\`"
+}
+
+pp_check_var_is_defined () {
+ if eval test -z "\"\$$1\""; then
+ pp_error "\$$1: not set"
+ eval "$1=undefined"
+ fi
+}
+
+pp_contains () {
+ case " $1 " in
+ *" $2 "*) return 0;;
+ *) return 1;;
+ esac
+}
+
+pp_contains_all () {
+ typeset _s _c
+ _l="$1"; shift
+ for _w
+ do
+ pp_contains "$_l" "$_w" || return 1
+ done
+ return 0
+}
+
+pp_contains_any () {
+ typeset _s _c
+ _l="$1"; shift
+ for _w
+ do
+ pp_contains "$_l" "$_w" && return 0
+ done
+ return 1
+}
+
+pp_add_to_list () {
+ if eval test -z \"\$$1\"; then
+ eval $1='"$2"'
+ elif eval pp_contains '"$'$1'"' '"$2"'; then
+ : already there
+ else
+ eval $1='"$'$1' $2"'
+ fi
+}
+
+pp_unique () {
+ typeset result element
+ result=
+ for element
+ do
+ pp_add_to_list result $element
+ done
+ echo $result
+}
+
+pp_mode_strip_altaccess () {
+ case "$1" in
+ ??????????+)
+ echo `echo "$1" | cut -b -10`;;
+ *)
+ echo "$1";;
+ esac
+}
+
+pp_mode_from_ls () {
+ typeset umode gmode omode smode
+
+ set -- `pp_mode_strip_altaccess "$1"`
+
+ case "$1" in
+ ?--[-X]??????) umode=0;;
+ ?--[xs]??????) umode=1;;
+ ?-w[-X]??????) umode=2;;
+ ?-w[xs]??????) umode=3;;
+ ?r-[-X]??????) umode=4;;
+ ?r-[xs]??????) umode=5;;
+ ?rw[-X]??????) umode=6;;
+ ?rw[xs]??????) umode=7;;
+ *) pp_error "bad user mode $1";;
+ esac
+
+ case "$1" in
+ ????--[-S]???) gmode=0;;
+ ????--[xs]???) gmode=1;;
+ ????-w[-S]???) gmode=2;;
+ ????-w[xs]???) gmode=3;;
+ ????r-[-X]???) gmode=4;;
+ ????r-[xs]???) gmode=5;;
+ ????rw[-X]???) gmode=6;;
+ ????rw[xs]???) gmode=7;;
+ *) pp_error "bad group mode $1";;
+ esac
+
+ case "$1" in
+ ???????--[-T]) omode=0;;
+ ???????--[xt]) omode=1;;
+ ???????-w[-T]) omode=2;;
+ ???????-w[xt]) omode=3;;
+ ???????r-[-T]) omode=4;;
+ ???????r-[xt]) omode=5;;
+ ???????rw[-T]) omode=6;;
+ ???????rw[xt]) omode=7;;
+ *) pp_error "bad other mode $1";;
+ esac
+
+ case "$1" in
+ ???[-x]??[-x]??[-x]) smode=;;
+ ???[-x]??[-x]??[tT]) smode=1;;
+ ???[-x]??[Ss]??[-x]) smode=2;;
+ ???[-x]??[Ss]??[tT]) smode=3;;
+ ???[Ss]??[-x]??[-x]) smode=4;;
+ ???[Ss]??[-x]??[tT]) smode=5;;
+ ???[Ss]??[Ss]??[-x]) smode=6;;
+ ???[Ss]??[Ss]??[tT]) smode=7;;
+ *) pp_error "bad set-id mode $1";;
+ esac
+
+ echo "$smode$umode$gmode$omode"
+}
+
+pp_find_recurse () {
+ pp_debug "find: ${1#$pp_destdir}/"
+ for f in "$1"/.* "$1"/*; do
+ case "$f" in */.|*/..) continue;; esac # should never happen!
+ if test -d "$f" -o -f "$f" -o -h "$f"; then
+ if test -d "$f" -a ! -h "$f"; then
+ echo "${f#$pp_destdir}/"
+ pp_find_recurse "$f"
+ else
+ echo "${f#$pp_destdir}"
+ fi
+ fi
+ done
+}
+
+pp_prepend () {
+ #test -t && pp_warn "pp_prepend: stdin is a tty?"
+ if test -f $1; then
+ pp_debug "prepending to $1"
+ mv $1 $1._prepend
+ cat - $1._prepend >$1
+ rm -f $1._prepend
+ else
+ pp_debug "prepend: creating $1"
+ cat >$1
+ fi
+}
+
+pp_note_file_used() {
+ echo "$1" >> $pp_wrkdir/all.files
+}
+
+pp_create_dir_if_missing () {
+ case "$1" in
+ */) pp_error "pp_create_dir_if_missing: trailing / forbidden";;
+ "") return 0;;
+ *) if test ! -d "$pp_destdir$1"; then
+ pp_debug "fabricating directory $1/"
+ pp_create_dir_if_missing "${1%/*}"
+ mkdir "$pp_destdir$1" &&
+ pp_note_file_used "$1/"
+ pp_remove_later "$1" &&
+ chmod ${2:-755} "$pp_destdir$1"
+ fi;;
+ esac
+}
+
+pp_add_file_if_missing () {
+ typeset dir
+ #-- check that the file isn't already declared in the component
+ if test -s $pp_wrkdir/%files.${2:-run}; then
+ awk "\$6 == \"$1\" {exit 1}" < $pp_wrkdir/%files.${2:-run} || return 1
+ fi
+
+ pp_create_dir_if_missing "${1%/*}"
+ pp_debug "fabricating file $1"
+ echo "f ${3:-755} - - ${4:--} $1" >> $pp_wrkdir/%files.${2:-run}
+ pp_note_file_used "$1"
+ pp_remove_later "$1"
+ return 0
+}
+
+pp_add_transient_file () {
+ test -f "$pp_destdir$1" && pp_die "$pp_destdir$1: exists"
+ pp_create_dir_if_missing "${1%/*}"
+ pp_debug "transient file $1"
+ pp_note_file_used "$1"
+ pp_remove_later "$1"
+}
+
+pp_remove_later () {
+ {
+ echo "$1"
+ test -s $pp_wrkdir/pp_cleanup && cat $pp_wrkdir/pp_cleanup
+ } > $pp_wrkdir/pp_cleanup.new
+ mv $pp_wrkdir/pp_cleanup.new $pp_wrkdir/pp_cleanup
+}
+
+pp_ls_readlink () {
+ if test -h "$1"; then
+ ls -1ld "$1" | sed -ne 's,.* -> ,,p'
+ else
+ echo "$1: not a symbolic link" >&2
+ return 1
+ fi
+}
+
+pp_remove_later_now () {
+ typeset f
+ if test -s $pp_wrkdir/pp_cleanup; then
+ pp_debug "pp_remove_later_now"
+ while read f; do
+ pp_debug "removing $pp_destdir$f"
+ if test -d $pp_destdir$f; then
+ rmdir $pp_destdir$f
+ else
+ rm $pp_destdir$f
+ fi
+ done < $pp_wrkdir/pp_cleanup
+ rm $pp_wrkdir/pp_cleanup
+ fi
+}
+
+pp_readlink() {
+
+pp_debug "&& pp_readlink_fn=$pp_readlink_fn"
+
+ if test -n "$pp_readlink_fn"; then
+pp_debug "&& calling $pp_readlink_fn $*"
+ "$pp_readlink_fn" "$@"
+ else
+ readlink "$@"
+ fi
+}
+
+
+pp_install_script_common () {
+ cat <<-.
+
+ # Automatically generated for
+ # $name $version ($pp_platform)
+ # by PolyPackage $pp_version
+
+ usage () {
+ case "$1" in
+ "list-services")
+ echo "usage: \$0 list-services" ;;
+ "list-components")
+ echo "usage: \$0 list-components" ;;
+ "list-files")
+ echo "usage: \$0 list-files {cpt...|all}" ;;
+ "install")
+ echo "usage: \$0 install {cpt...|all}" ;;
+ "uninstall")
+ echo "usage: \$0 uninstall {cpt...|all}" ;;
+ "start")
+ echo "usage: \$0 start {svc...}" ;;
+ "stop")
+ echo "usage: \$0 stop {svc...}" ;;
+ "print-platform")
+ echo "usage: \$0 print-platform" ;;
+ *)
+ echo "usage: \$0 [-q] command [args]"
+ echo " list-services"
+ echo " list-components"
+ echo " list-files {cpt...|all}"
+ echo " install {cpt...|all}"
+ echo " uninstall {cpt...|all}"
+ echo " start {svc...}"
+ echo " stop {svc...}"
+ echo " print-platform"
+ ;;
+ esac >&2
+ exit 1
+ }
+
+ if test x"\$1" = x"-q"; then
+ shift
+ verbose () { "\$@"; }
+ verbosemsg () { : ; }
+ else
+ verbose () { echo "+ \$*"; "\$@"; }
+ verbosemsg () { echo "\$*"; }
+ fi
+.
+}
+
+
+pp_functions () {
+ typeset func deps allfuncs
+ allfuncs=
+ while test $# -gt 0; do
+ pp_add_to_list allfuncs "$1"
+ deps=`pp_backend_function "$1:depends"`
+ shift
+ set -- `pp_unique "$@" $deps`
+ done
+
+ for func in $allfuncs
+ do
+ pp_debug "generating function code for '$1'"
+ echo ""
+ echo "$func () {"
+ case "$func" in
+ pp_mkgroup|pp_mkuser|pp_havelib) echo <<.;;
+ if test \$# -lt 1; then
+ echo "$func: not enough arguments" >&2
+ return 1
+ fi
+.
+ esac
+ pp_backend_function "$func" || cat <<.
+ echo "$func: not implemented" >&2
+ return 1
+.
+ echo "}"
+ done
+}
+
+pp_function () {
+ pp_functions "$1"
+}
+
+pp_makevar () {
+ #-- convert all non alpha/digits to underscores
+ echo "$*" | tr -c '[a-z][A-Z][0-9]\012' '[_*]'
+}
+
+pp_getpwuid () {
+ awk -F: '$3 == uid { if (!found) print $1; found=1; } END { if (!found) exit 1; }' uid="$1" \
+ < /etc/passwd || pp_error "no local username for uid $1"
+}
+
+pp_getgrgid () {
+ awk -F: '$3 == gid { if (!found) print $1; found=1; } END { if (!found) exit 1; }' gid="$1" \
+ < /etc/group || pp_error "no local group for gid $1"
+}
+
+pp_backend_function_getopt () {
+ cat <<'..'
+pp_getopt () {
+ _pp_optstring="$1"; shift; eval `_pp_getopt "$_pp_optstring"`
+}
+_pp_getopt_meta=s,[\\\\\"\'\`\$\&\;\(\)\{\}\#\%\ \ ],\\\\\&,g
+_pp_protect () {
+ sed "$_pp_getopt_meta" <<. | tr '\012' ' '
+$*
+.
+}
+_pp_protect2 () {
+ sed "s,^..,,$pp_getopt_meta" <<. | tr '\012' ' '
+$*
+.
+}
+_pp_nonl () {
+ tr '\012' ' ' <<.
+$*
+.
+}
+_pp_getopt () {
+ _pp_nonl '_pp_nonl set --; while test $# -gt 0; do case "$1" in "--") shift; break;;'
+ sed 's/\([^: ]:*\)/<@<\1>@>/g;
+ s/<@<\(.\):>@>/"-\1") _pp_nonl -"\1"; _pp_protect "$2"; shift; shift;; "-\1"*) _pp_nonl -"\1"; _pp_protect2 "$1"; shift;;/g;s/<@<\(.\)>@>/ "-\1") _pp_nonl -"\1"; shift;; "-\1"*) _pp_nonl -"\1"; _pp_tmp="$1"; shift; set -- -`_pp_protect2 "$_pp_tmp"` "$@";;/g' <<.
+$1
+.
+ _pp_nonl '-*) echo "$1: unknown option">&2; return 1;; *) break;; esac; done; _pp_nonl --; while test $# -gt 0; do _pp_nonl "$1"; shift; done; echo'
+ echo
+}
+..
+}
+
+pp_copy_unstripped () {
+ typeset filedir realdir
+ filedir="`dirname ${1#$pp_destdir}`"
+ realdir="$pp_wrkdir/unstripped/$filedir"
+
+ mkdir -p "$realdir"
+ # Can't use hardlinks because `strip` modifies the original file in-place
+ cp "$1" "$realdir"
+}
+
+pp_package_stripped_binaries () {
+ (cd "$pp_wrkdir/unstripped" && tar -c .) \
+ | gzip > "$name-dbg-$version.tar.gz"
+ rm -rf "$pp_wrkdir/unstripped"
+}
+
+pp_strip_binaries () {
+ if test x"$pp_opt_save_unstripped" = x"true"; then
+ rm -rf "$pp_wrkdir/unstripped"
+ mkdir "$pp_wrkdir/unstripped"
+ fi
+
+ for f in `find "$pp_destdir" -type f`; do
+ if file "$f" | awk '{print $2}' | grep ^ELF >/dev/null 2>&1; then
+ if test x"$pp_opt_save_unstripped" = x"true"; then
+ if file "$f" | LC_MESSAGES=C grep 'not stripped' >/dev/null 2>&1; then
+ pp_debug "Saving unstripped binary $f"
+ pp_copy_unstripped "$f"
+ else
+ pp_debug "$f is already stripped; not saving a copy"
+ fi
+ fi
+ pp_debug "Stripping unnecessary symbols from $f"
+ strip "$f"
+ fi
+ done
+
+ if test x"$pp_opt_save_unstripped" = x"true"; then
+ pp_package_stripped_binaries
+ fi
+}
+
+pp_if_true=0
+pp_if_false=0
+
+pp_frontend_init () {
+ name=
+ version=
+ summary="no summary"
+ description="No description"
+ copyright="(c) 2008 Quest Software, Inc. All rights reserved"
+ vendor="Quest Software, Inc."
+
+ #-- if the user supplied extra arguments on the command line
+ # then load them now.
+ pp_debug "pp_opt_init_vars=$pp_opt_init_vars"
+ test -n "$pp_opt_init_vars" && eval "$pp_opt_init_vars"
+}
+
+pp_is_qualifier () {
+ typeset ret
+
+ case "$1" in
+ "["*"]") ret=true;;
+ *) ret=false;;
+ esac
+ pp_debug "is_qualifier: $* -> $ret"
+ test $ret = true
+}
+
+pp_eval_qualifier () {
+ typeset ret
+
+ case "$1" in
+ "[!$pp_platform]"| \
+ "[!"*",$pp_platform]"| \
+ "[!$pp_platform,"*"]"| \
+ "[!"*",$pp_platform,"*"]") ret=false;;
+ "[!"*"]") ret=true;;
+ "[$pp_platform]"| \
+ "["*",$pp_platform]"| \
+ "[$pp_platform,"*"]"| \
+ "["*",$pp_platform,"*"]") ret=true;;
+ "["*"]") ret=false;;
+ *) pp_die "pp_eval_qualifier: bad qualifier '$1'"
+ esac
+ pp_debug "eval: $* -> $ret"
+ test true = $ret
+}
+
+pp_frontend_if () {
+ typeset ifcmd ifret
+ ifcmd="$1";
+ shift
+ case "$ifcmd" in
+ %if) if test 0 = $pp_if_false; then
+ case "$*" in
+ true |1) pp_incr pp_if_true;;
+ false|0) pp_incr pp_if_false;;
+ *)
+ ifret=true
+ if pp_is_qualifier "$*"; then
+ pp_eval_qualifier "$*" || ifret=false
+ else
+ eval test "$@" || ifret=false
+ pp_debug "evaluating test $* -> $ifret"
+ fi
+ pp_incr pp_if_$ifret
+ ;;
+ esac
+ else
+ pp_incr pp_if_false
+ fi;;
+ %else) test $# = 0 || pp_warn "ignoring argument to %else"
+ if test $pp_if_false -gt 1; then
+ : no change
+ elif test $pp_if_false = 1; then
+ pp_incr pp_if_true
+ pp_decr pp_if_false
+ elif test $pp_if_true = 0; then
+ pp_die "unmatched %else"
+ else
+ pp_incr pp_if_false
+ pp_decr pp_if_true
+ fi;;
+ %endif) test $# = 0 || pp_warn "ignoring argument to %endif"
+ if test $pp_if_false -gt 0; then
+ pp_decr pp_if_false
+ elif test $pp_if_true -gt 0; then
+ pp_decr pp_if_true
+ else
+ pp_die "unmatched %endif"
+ fi;;
+ *) pp_die "frontend_if: unknown cmd $ifcmd";;
+ esac
+}
+
+
+pp_frontend () {
+ typeset section newsection sed_word sed_ws line cpt svc
+ typeset section_enabled newsection_enabled s sed sed_candidate
+
+ section='%_initial'
+ newsection='%_initial'
+ section_enabled=:
+ newsection_enabled=:
+ sed_word="[a-zA-Z_][a-zA-Z_0-9]*"
+ sed_ws="[ ]"
+
+ #-- not all seds are created equal
+ sed=
+ for sed_candidate in ${PP_SED:-sed} /usr/xpg4/bin/sed; do
+ if echo 'foo' | $sed_candidate -ne '/^\(x\)*foo/p' | grep foo > /dev/null
+ then
+ sed="$sed_candidate"
+ break
+ fi
+ done
+ test -z "$sed" &&
+ pp_die "sed is broken on this system"
+
+ pp_lineno=0
+
+ #-- Note: this sed script should perform similar to pp_eval_qualifier()
+ $sed -e "/^#/s/.*//" \
+ -e "/^\\[!\\($sed_word,\\)*$pp_platform\\(,$sed_word\\)*\\]/s/.*//" \
+ -e "s/^\\[\\($sed_word,\\)*$pp_platform\\(,$sed_word\\)*\\]$sed_ws*//" \
+ -e "s/^\\[!\\($sed_word,\\)*$sed_word\\]$sed_ws*//" \
+ -e "/^\\[\\($sed_word,\\)*$sed_word\\]/s/.*//" \
+ -e "s/^%$sed_ws*/%/" \
+ -e "s/^$sed_ws/%\\\\&/" \
+ > $pp_wrkdir/frontend.tmp
+
+ #-- add an ignore section at the end to force section completion
+ echo '%ignore' >> $pp_wrkdir/frontend.tmp
+ echo >> $pp_wrkdir/frontend.tmp
+
+ exec 0<$pp_wrkdir/frontend.tmp
+ : > $pp_wrkdir/tmp
+ : > $pp_wrkdir/%fixup
+ while read -r line; do
+ #-- Convert leading double-% to single-%, or switch sections
+ pp_incr pp_lineno
+
+ pp_debug "line $pp_lineno: $line"
+ set -f
+ set -- $line
+ set +f
+ #pp_debug "line $pp_lineno: $*"
+
+ case "$line" in %*)
+ case "$1" in
+ %if|%else|%endif)
+ pp_debug "processing if directive $1"
+ pp_frontend_if "$@"
+ continue;;
+ esac
+ test 0 -ne $pp_if_false && continue # ignore lines %if'd out
+
+ case "$1" in
+ %set|%fixup|%ignore)
+ pp_debug "processing new section $1"
+ newsection="$1"; shift
+ newsection_enabled=:
+ if pp_is_qualifier "$1"; then
+ pp_eval_qualifier "$1" || newsection_enabled=false
+ shift
+ fi
+ test $# -eq 0 || pp_warn "ignoring extra arguments: $line"
+ continue;;
+ %post|%preun|%files|%depend|%check)
+ pp_debug "processing new component section $*"
+ s="$1"; shift
+ if test $# -eq 0 || pp_is_qualifier "$1"; then
+ cpt=run
+ else
+ cpt="$1"
+ shift
+ fi
+ newsection="$s.$cpt"
+ newsection_enabled=:
+ if test $# -gt 0 && pp_is_qualifier "$1"; then
+ pp_eval_qualifier "$1" || newsection_enabled=false
+ shift
+ fi
+ test $# -eq 0 ||
+ pp_warn "ignoring extra arguments: $line"
+ case "$cpt" in
+ run|dbg|doc|dev)
+ $newsection_enabled && pp_add_component "$cpt";;
+ x-*) :;; # useful for discarding stuff
+ *) pp_error "unknown component: $1 $cpt";;
+ esac
+ continue;;
+ %pp)
+ newsection="%ignore"; shift
+ if test $# -gt 0; then
+ pp_set_api_version "$1"
+ shift
+ else
+ pp_error "%pp: missing version"
+ fi
+ test $# -gt 0 &&
+ pp_error "%pp: too many arguments"
+ continue;;
+ %service)
+ pp_debug "processing new service section $1 $2"
+ s="$1"; shift
+ if test $# -eq 0 || pp_is_qualifier "$1"; then
+ pp_error "$s: service name required"
+ svc=unknown
+ else
+ svc="$1"; shift
+ fi
+
+ newsection="$s.$svc"
+ newsection_enabled=:
+ if test $# -gt 0 && pp_is_qualifier "$1"; then
+ pp_eval_qualifier "$1" || newsection_enabled=false
+ shift
+ fi
+ test $# -eq 0 ||
+ pp_warn "ignoring extra arguments: $line"
+ $newsection_enabled && pp_add_service "$svc"
+ continue;;
+ %\\*)
+ pp_debug "removing leading %\\"
+ line="${line#??}"
+ pp_debug " result is <$line>"
+ set -f
+ set -- $line
+ set +f
+ ;;
+ %%*)
+ pp_debug "removing leading %"
+ line="${line#%}"
+ set -f
+ set -- $line
+ set +f
+ ;;
+ %*)
+ pp_error "unknown section $1"
+ newsection='%ignore'
+ newsection_enabled=:
+ continue;;
+ esac;;
+ esac
+
+ test 0 != $pp_if_false && continue # ignore lines %if'd out
+
+ pp_debug "section=$section (enabled=$section_enabled) newsection=$newsection (enabled=$newsection_enabled)"
+
+ #-- finish processing a previous section
+ if test x"$newsection" != x""; then
+ $section_enabled && case "$section" in
+ %ignore|%_initial)
+ pp_debug "leaving ignored section $section"
+ : ignore # guaranteed to be the last section
+ ;;
+ %set)
+ pp_debug "leaving $section: sourcing $pp_wrkdir/tmp"
+ $pp_opt_debug && cat $pp_wrkdir/tmp >&2
+ . $pp_wrkdir/tmp
+ : > $pp_wrkdir/tmp
+ ;;
+ %preun.*|%post.*|%depend.*|%check.*|%service.*|%fixup)
+ pp_debug "leaving $section: substituting $pp_wrkdir/tmp"
+ # cat $pp_wrkdir/tmp >&2 # debugging
+ $pp_opt_debug && pp_substitute < $pp_wrkdir/tmp >&2
+ pp_substitute < $pp_wrkdir/tmp > $pp_wrkdir/tmp.sh
+ . $pp_wrkdir/tmp.sh >> $pp_wrkdir/$section ||
+ pp_error "shell error in $section"
+ rm -f $pp_wrkdir/tmp.sh
+ : > $pp_wrkdir/tmp
+ ;;
+ esac
+ section="$newsection"
+ section_enabled="$newsection_enabled"
+ newsection=
+ fi
+
+ #-- ignore section content that is disabled
+ $section_enabled || continue
+
+ #-- process some lines in-place
+ case "$section" in
+ %_initial)
+ case "$line" in "") continue;; esac # ignore non-section blanks
+ pp_die "Ignoring text before % section introducer";;
+ %set|%preun.*|%post.*|%check.*|%service.*|%fixup)
+ pp_debug "appending line to \$pp_wrkdir/tmp"
+ echo "$line" >> $pp_wrkdir/tmp
+ ;;
+ %files.*)
+ test $# -eq 0 && continue;
+ pp_files_expand "$@" >> $pp_wrkdir/$section
+ ;;
+ %depend.*)
+ pp_debug "Adding explicit dependency $@ to $cpt"
+ echo "$@" >> $pp_wrkdir/%depend.$cpt
+ ;;
+ esac
+ done
+ exec <&-
+
+ if test $pp_if_true != 0 -o $pp_if_false != 0; then
+ pp_die "missing %endif at end of file"
+ fi
+
+ pp_lineno=
+
+ pp_debug " name = $name"
+ pp_debug " version = $version"
+ pp_debug " summary = $summary"
+ pp_debug " description = $description"
+ pp_debug " copyright = $copyright"
+ pp_debug ""
+ pp_debug "\$pp_components: $pp_components"
+ pp_debug "\$pp_services: $pp_services"
+}
+
+pp_set_api_version() {
+ case "$1" in
+ 1.0) : ;;
+ *) pp_error "This version of polypackage is too old";;
+ esac
+}
+
+pp_platform=
+
+pp_set_platform () {
+ if test -n "$pp_opt_platform"; then
+ pp_contains "$pp_platforms" "$pp_opt_platform" ||
+ pp_die "$pp_opt_platform: unknown platform"
+ pp_platform="$pp_opt_platform"
+ else
+ uname_s=`uname -s 2>/dev/null`
+ pp_platform=
+ for p in $pp_platforms; do
+ pp_debug "probing for platform $p"
+ if eval pp_backend_${p}_detect "$uname_s"; then
+ pp_platform="$p"
+ break;
+ fi
+ done
+ test -z "$pp_platform" &&
+ pp_die "cannot detect platform (supported: $pp_platforms)"
+ fi
+ pp_debug "pp_platform = $pp_platform"
+}
+
+pp_expand_path=
+
+pp_expand_test_usr_bin () {
+ awk '$1 == "/usr" || $2 == "/usr" {usr++}
+ $1 == "/bin" || $2 == "/bin" {bin++}
+ END { if (usr == 1 && bin == 1) exit(0); else exit(1); }'
+}
+
+pp_set_expand_converter_or_reexec () {
+ test -d /usr -a -d /bin ||
+ pp_die "missing /usr or /bin"
+ echo /usr /bin | pp_expand_test_usr_bin || pp_die "pp_expand_test_usr_bin?"
+ if (eval "echo /{usr,bin}" | pp_expand_test_usr_bin) 2>/dev/null; then
+ pp_expand_path=pp_expand_path_brace
+ elif (eval "echo /@(usr|bin)" | pp_expand_test_usr_bin) 2>/dev/null; then
+ pp_expand_path=pp_expand_path_at
+ else
+ test x"$pp_expand_rexec" != x"true" ||
+ pp_die "problem finding shell that can do brace expansion"
+ for shell in ksh ksh93 bash; do
+ if ($shell -c 'echo /{usr,bin}' |
+ pp_expand_test_usr_bin) 2>/dev/null ||
+ ($shell -c 'echo /@(usr|bin)' |
+ pp_expand_test_usr_bin) 2>/dev/null
+ then
+ pp_debug "switching to shell $shell"
+ pp_expand_rexec=true exec $shell "$0" "$@"
+ fi
+ done
+ pp_die "cannot find a shell that does brace expansion"
+ fi
+}
+
+pp_expand_path_brace () {
+ typeset f
+ eval "for f in $1; do echo \"\$f\"; done|sort -u"
+}
+
+pp_expand_path_at () {
+ typeset f
+ eval "for f in `
+ echo "$1" | sed -e 's/{/@(/g' -e 's/}/)/g' -e 's/,/|/g'
+ `; do echo \"\$f\"; done|sort -u"
+}
+
+pp_shlib_suffix='.so*'
+
+pp_model_init () {
+ #@ $pp_components: whitespace-delimited list of components seen in %files
+ pp_components=
+ #@ $pp_services: whitespace-delimited list of %service seen
+ pp_services=
+
+ rm -f $pp_wrkdir/%files.* \
+ $pp_wrkdir/%post.* \
+ $pp_wrkdir/%preun.* \
+ $pp_wrkdir/%service.* \
+ $pp_wrkdir/%set \
+ $pp_wrkdir/%fixup
+}
+
+
+pp_have_component () {
+ pp_contains "$pp_components" "$1"
+}
+
+pp_have_all_components () {
+ pp_contains_all "$pp_components" "$@"
+}
+
+pp_add_component () {
+ pp_add_to_list 'pp_components' "$1"
+}
+
+pp_add_service () {
+ pp_add_to_list 'pp_services' "$1"
+}
+
+pp_service_init_vars () {
+ cmd=
+ pidfile=
+ stop_signal=15 # SIGTERM
+ user=root
+ group=
+ enable=yes # make it so the service starts on boot
+ optional=no # Whether installing this service is optional
+ pp_backend_init_svc_vars
+}
+
+pp_service_check_vars () {
+ test -n "$cmd" ||
+ pp_error "%service $1: cmd not defined"
+ case "$enable" in
+ yes|no) : ;;
+ *) pp_error "%service $1: \$enable must be set to yes or no";;
+ esac
+}
+
+pp_load_service_vars () {
+ pp_service_init_vars
+ . "$pp_wrkdir/%service.$1"
+ pp_service_check_vars "$1"
+}
+
+pp_files_expand () {
+ typeset _p _mode _group _owner _flags _path _optional _has_target _tree
+ typeset _path _file _tgt _m _o _g _f _type _lm _ll _lo _lg _ls _lx
+ typeset _ignore _a
+
+ test $# -eq 0 && return
+
+ pp_debug "pp_files_expand: path is: $1"
+
+ case "$1" in "#"*) return;; esac
+ _p="$1"; shift
+
+ pp_debug "pp_files_expand: other arguments: $*"
+
+ #-- the mode must be an octal number of at least three digits
+ _mode="="
+ _a=`eval echo \"$1\"`
+ case "$_a" in
+ *:*) :;;
+ -|=|[01234567][01234567][01234567]*) _mode="$_a"; shift;;
+ esac
+
+ #-- the owner:group field may have optional parts
+ _a=`eval echo \"$1\"`
+ case "$_a" in
+ *:*) _group=${_a#*:}; _owner=${_a%:*}; shift;;
+ =|-) _group=$_a; _owner=$_a; shift;;
+ *) _group=; _owner=;;
+ esac
+
+ #-- process the flags argument
+ _flags=
+ _optional=false
+ _has_target=false
+ _ignore=false
+ if test $# -gt 0; then
+ _a=`eval echo \"$1\"`
+ case ",$_a," in *,volatile,*) _flags="${_flags}v";; esac
+ case ",$_a," in *,optional,*) _optional=true;; esac
+ case ",$_a," in *,symlink,*) _has_target=true;; esac
+ case ",$_a," in *,ignore-others,*) _flags="${_flags}i";; esac
+ case ",$_a," in *,ignore,*) _ignore=true;; esac
+ shift
+ fi
+
+ #-- process the target argument
+ if $_has_target; then
+ test $# -ne 0 || pp_error "$_p: missing target"
+ _a=`eval echo \"$1\"`
+ _target="$_a"
+ shift
+ fi
+
+ pp_debug "pp_files_expand: $_mode|$_owner:$_group|$_flags|$_target|$*"
+
+ test $# -eq 0 || pp_error "$_p: too many arguments"
+
+ #-- process speciall suffixes
+ tree=
+ case "$_p" in
+ *"/**") _p="${_p%"/**"}"; tree="**";;
+ *".%so") _p="${_p%".%so"}$pp_shlib_suffix";;
+ esac
+
+ #-- expand the path using the shell glob
+ pp_debug "expanding .$_p ... with $pp_expand_path"
+ (cd ${pp_destdir} && $pp_expand_path ".$_p") > $pp_wrkdir/tmp.files.exp
+
+ #-- expand path/** by rewriting the glob output file
+ case "$tree" in
+ "") : ;;
+ "**")
+ pp_debug "expanding /** tree ..."
+ while read _path; do
+ _path="${_path#.}"
+ pp_find_recurse "$pp_destdir${_path%/}"
+ done < $pp_wrkdir/tmp.files.exp |
+ sort -u > $pp_wrkdir/tmp.files.exp2
+ mv $pp_wrkdir/tmp.files.exp2 $pp_wrkdir/tmp.files.exp
+ ;;
+ esac
+
+ while read _path; do
+ _path="${_path#.}"
+ _file="${pp_destdir}${_path}"
+ _tgt=
+ _m="$_mode"
+ _o="${_owner:--}"
+ _g="${_group:--}"
+ _f="$_flags"
+
+ case "$_path" in
+ /*) :;;
+ *) pp_warn "$_path: inserting leading /"
+ _path="/$_path";; # ensure leading /
+ esac
+
+ #-- sanity checks
+ case "$_path" in
+ */../*|*/..) pp_error "$_path: invalid .. in path";;
+ */./*|*/.) pp_warn "$_path: invalid component . in path";;
+ *//*) pp_warn "$_path: redundant / in path";;
+ esac
+
+ #-- set the type based on the real file's type
+ if $_ignore; then
+ _type=f _m=_ _o=_ _g=_
+ elif test -h "$_file"; then
+ case "$_path" in
+ */) pp_warn "$_path (symlink $_file): removing trailing /"
+ _path="${_path%/}"
+ ;;
+ esac
+ _type=s
+ if test x"$_target" != x"=" -a -n "$_target"; then
+ _tgt="$_target"
+pp_debug "symlink target is $_tgt"
+ else
+ _tgt=`pp_readlink "$_file"`;
+ test -z "$_tgt" && pp_error "can't readlink $_file"
+ case "$_tgt" in
+ ${pp_destdir}/*)
+ pp_warn "stripped \$destdir from symlink ($_path)"
+ _tgt="${_tgt#$pp_destdir}";;
+ esac
+ fi
+ _m=777
+ elif test -d "$_file"; then
+ #-- display a warning if the user forgot the trailing /
+ case "$_path" in
+ */) :;;
+ *) pp_warn "$_path (matching $_file): adding trailing /"
+ _path="$_path/";;
+ esac
+ _type=d
+ $_has_target && pp_error "$_file: not a symlink"
+ elif test -f "$_file"; then
+ case "$_path" in
+ */) pp_warn "$_path (matching $_file): removing trailing /"
+ _path="${_path%/}"
+ ;;
+ esac
+ _type=f
+ $_has_target && pp_error "$_file: not a symlink"
+ else
+ $_optional && continue
+ pp_error "$_file: missing"
+ _type=f
+ fi
+
+ #-- convert '=' shortcuts into mode/owner/group from ls
+ case ":$_m:$_o:$_g:" in *:=:*)
+ if LS_OPTIONS=--color=never /bin/ls -ld "$_file" \
+ > $pp_wrkdir/ls.tmp
+ then
+ read _lm _ll _lo _lg _ls _lx < $pp_wrkdir/ls.tmp
+ test x"$_m" = x"=" && _m=`pp_mode_from_ls "$_lm"`
+ test x"$_o" = x"=" && _o="$_lo"
+ test x"$_g" = x"=" && _g="$_lg"
+ else
+ pp_error "cannot read $_file"
+ test x"$_m" = x"=" && _m=-
+ test x"$_o" = x"=" && _o=-
+ test x"$_g" = x"=" && _g=-
+ fi
+ ;;
+ esac
+
+ test -n "$_f" || _f=-
+
+ #-- sanity checks
+ test -n "$_type" || pp_die "_type empty"
+ test -n "$_path" || pp_die "_path empty"
+ test -n "$_m" || pp_die "_m empty"
+ test -n "$_o" || pp_die "_o empty"
+ test -n "$_g" || pp_die "_g empty"
+
+ #-- setuid/gid files must be given an explicit owner/group (or =)
+ case "$_o:$_g:$_m" in
+ -:*:[4657][1357]??|-:*:[4657]?[1357]?|-:*:[4657]??[1357])
+ pp_error "$_path: setuid file ($_m) missing explicit owner";;
+ *:-:[2367][1357]??|*:-:[2367]?[1357]?|*:-:[2367]??[1357])
+ pp_error "$_path: setgid file ($_m) missing explicit group";;
+ esac
+
+ # convert numeric uids into usernames; only works for /etc/passwd
+ case "$_o" in [0-9]*) _o=`pp_getpwuid $_o`;; esac
+ case "$_g" in [0-9]*) _g=`pp_getgrgid $_g`;; esac
+
+ pp_debug "$_type $_m $_o $_g $_f $_path" $_tgt
+ $_ignore || echo "$_type $_m $_o $_g $_f $_path" $_tgt
+ pp_note_file_used "$_path"
+ case "$_f" in *i*) echo "$_path" >> $pp_wrkdir/ign.files;; esac
+ done < $pp_wrkdir/tmp.files.exp
+}
+
+pp_files_check_duplicates () {
+ typeset _path
+ if test -s $pp_wrkdir/all.files; then
+ sort < $pp_wrkdir/all.files | uniq -d > $pp_wrkdir/duplicate.files
+ if test -f $pp_wrkdir/ign.awk; then
+ # Remove ignored files
+ mv $pp_wrkdir/duplicate.files $pp_wrkdir/duplicate.files.ign
+ sed -e 's/^/_ _ _ _ _ /' < $pp_wrkdir/duplicate.files.ign |
+ awk -f $pp_wrkdir/ign.awk |
+ sed -e 's/^_ _ _ _ _ //' > $pp_wrkdir/duplicate.files
+ fi
+ while read _path; do
+ pp_warn "$_path: file declared more than once"
+ done <$pp_wrkdir/duplicate.files
+ fi
+}
+
+pp_files_check_coverage () {
+ pp_find_recurse "$pp_destdir" | sort > $pp_wrkdir/coverage.avail
+ if test -s $pp_wrkdir/all.files; then
+ sort -u < $pp_wrkdir/all.files
+ else
+ :
+ fi > $pp_wrkdir/coverage.used
+ join -v1 $pp_wrkdir/coverage.avail $pp_wrkdir/coverage.used \
+ > $pp_wrkdir/coverage.not-packaged
+ if test -s $pp_wrkdir/coverage.not-packaged; then
+ pp_warn "The following files/directories were found but not packaged:"
+ sed -e 's,^, ,' < $pp_wrkdir/coverage.not-packaged >&2
+ fi
+ join -v2 $pp_wrkdir/coverage.avail $pp_wrkdir/coverage.used \
+ > $pp_wrkdir/coverage.not-avail
+ if test -s $pp_wrkdir/coverage.not-avail; then
+ pp_warn "The following files/directories were named but not found:"
+ sed -e 's,^, ,' < $pp_wrkdir/coverage.not-avail >&2
+ fi
+}
+
+pp_files_ignore_others () {
+ typeset p f
+
+ test -s $pp_wrkdir/ign.files || return
+
+ #-- for each file in ign.files, we remove it from all the
+ # other %files.* lists, except where it has an i flag.
+ # rather than scan each list multiple times, we build
+ # an awk script
+
+ pp_debug "stripping ignore files"
+
+ while read p; do
+ echo '$6 == "'"$p"'" && $5 !~ /i/ { next }'
+ done < $pp_wrkdir/ign.files > $pp_wrkdir/ign.awk
+ echo '{ print }' >> $pp_wrkdir/ign.awk
+
+ $pp_opt_debug && cat $pp_wrkdir/ign.awk
+
+ for f in $pp_wrkdir/%files.*; do
+ mv $f $f.ign
+ awk -f $pp_wrkdir/ign.awk < $f.ign > $f || pp_error "awk"
+ done
+}
+
+pp_service_scan_groups () {
+ typeset svc
+
+ #-- scan for "group" commands, and build a list of groups
+ pp_service_groups=
+ if test -n "$pp_services"; then
+ for svc in $pp_services; do
+ group=
+ . $pp_wrkdir/%service.$svc
+ if test -n "$group"; then
+ pp_contains "$pp_services" "$group" && pp_error \
+ "%service $svc: group name $group in use by a service"
+ pp_add_to_list 'pp_service_groups' "$group"
+ echo "$svc" >> $pp_wrkdir/%svcgrp.$group
+ fi
+ done
+ fi
+}
+
+pp_service_get_svc_group () {
+ (tr '\012' ' ' < $pp_wrkdir/%svcgrp.$1 ; echo) | sed -e 's/ $//'
+}
+
+for _sufx in _init '' _names _cleanup _install_script \
+ _init_svc_vars _function _probe _vas_platforms
+do
+ eval "pp_backend$_sufx () { pp_debug pp_backend$_sufx; pp_backend_\${pp_platform}$_sufx \"\$@\"; }"
+done
+
+
+pp_platforms="$pp_platforms aix"
+
+pp_backend_aix_detect () {
+ test x"$1" = x"AIX"
+}
+
+pp_backend_aix_init () {
+ pp_aix_detect_arch
+ pp_aix_detect_os
+
+ pp_aix_bosboot= # components that need bosboot
+ pp_aix_lang=en_US
+ pp_aix_copyright=
+ pp_aix_start_services_after_install=false
+ pp_aix_init_services_after_install=true
+
+ case "$pp_aix_os" in
+ *) pp_readlink_fn=pp_ls_readlink;; # XXX
+ esac
+
+ pp_aix_abis_seen=
+}
+
+pp_aix_detect_arch () {
+ pp_aix_arch_p=`uname -p 2>/dev/null`
+ case "$pp_aix_arch_p" in
+ "") pp_debug "can't get processor type from uname -p"
+ pp_aix_arch_p=powerpc
+ pp_aix_arch=R;; # guess (lsattr -l proc0 ??)
+ powerpc) pp_aix_arch=R;;
+ *) pp_aix_arch_p=intel
+ pp_aix_arch=I;; # XXX? verify
+ esac
+
+ case "`/usr/sbin/lsattr -El proc0 -a type -F value`" in
+ PowerPC_POWER*) pp_aix_arch_std=ppc64;;
+ PowerPC*) pp_aix_arch_std=ppc;;
+ *) pp_aix_arch_std=unknown;;
+ esac
+}
+
+pp_aix_detect_os () {
+ typeset r v
+
+ r=`uname -r`
+ v=`uname -v`
+ pp_aix_os=aix$v$r
+}
+
+pp_aix_version_fix () {
+ typeset v
+ v=`echo $1 | tr -c -d '[0-9].\012'`
+ if test x"$v" != x"$1"; then
+ pp_warn "stripped version '$1' to '$v'"
+ fi
+ case $v in
+ ""|*..*|.*|*.) pp_error "malformed '$1'"
+ echo "0.0.0.0";;
+ *.*.*.*.*)
+ # 5 components are only valid for fileset updates, not base
+ # filesets (full packages). We trim 5+ components down to 4.
+ pp_warn "version '$1' has too many dots for AIX, truncating"
+ echo "$v" | cut -d. -f1-4;;
+ *.*.*.*) echo "$v";;
+ *.*.*) echo "$v.0";;
+ *.*) echo "$v.0.0";;
+ *) echo "$v.0.0.0";;
+ esac
+}
+
+pp_aix_select () {
+ case "$1" in
+ -user) op="";;
+ -root) op="!";;
+ *) pp_die "pp_aix_select: bad argument";;
+ esac
+ #pp_debug awk '$5 '$op' /^\/(usr|opt)(\/|$)/ { print; }'
+ #awk '$5 '$op' /^\/(usr|opt)(\/|$)/ { print; }'
+ awk $op'($6 ~ /^\/usr\// || $6 ~ /^\/opt\//) { print; }'
+}
+
+pp_aix_copy_root () {
+ typeset t m o g f p st target
+ while read t m o g f p st; do
+ case "$t" in
+ d) pp_create_dir_if_missing "$1${p%/}";;
+ f) pp_add_transient_file "$1$p"
+ pp_verbose ln "$pp_destdir$p" "$pp_destdir$1$p" ||
+ pp_error "can't link $p into $1";;
+ *) pp_warn "pp_aix_copy_root: filetype $t not handled";;
+ esac
+ done
+}
+
+
+pp_aix_size () {
+ typeset prefix t m o g f p st
+
+ prefix="$1"
+ while read t m o g f p st; do
+ case "$t" in f) du -a "$pp_destdir$p";; esac
+ done | sed -e 's!/[^/]*$!!' | sort +1 |
+ awk '{ if ($2 != d)
+ { if (sz) print d,sz;
+ d=$2; sz=0 }
+ sz += $1; }
+ END { if (sz) print d,sz }' |
+ sed -n -e "s!^$pp_destdir!$prefix!p"
+}
+
+pp_aix_list () {
+ awk '{ print "." pfx $6; }' pfx="$1"
+}
+
+pp_aix_make_liblpp () {
+ typeset out dn fl f
+
+ out="$1"; shift
+ dn=`dirname "$2"`
+ fl=
+ for f
+ do
+ case "$f" in "$dn/"*) fl="$fl `basename $f`" ;;
+ *) pp_die "liblpp name $f not in $dn/";; esac
+ done
+ (cd "$dn" && pp_verbose ar -c -g -r "$out" $fl) || pp_error "ar error"
+}
+
+pp_aix_make_script () {
+ rm -f "$1"
+ echo "#!/bin/sh" > "$1"
+ cat >> "$1"
+ echo "exit 0" >> "$1"
+ chmod +x "$1"
+}
+
+pp_aix_inventory () {
+ typeset fileset t m o g f p st type
+
+ fileset="$1"
+ while read t m o g f p st; do
+ case "$p" in *:*) pp_error "path $p contains colon";; esac
+ echo "$p:"
+ case "$t" in
+ f) type=FILE; defm=644 ;;
+ s) type=SYMLINK; defm=777 ;;
+ d) type=DIRECTORY; defm=755 ;;
+ esac
+ echo " type = $type"
+ echo " class = inventory,apply,$fileset"
+ set -- `/bin/ls -ld "$pp_destdir$p" 2>/dev/null`
+ owner=$3 group=$4 size=$5
+ if test x"$m" = x"-"; then m="$defm"; fi
+ if test x"$o" = x"-"; then o="root"; fi
+ if test x"$g" = x"-"; then g="system"; fi
+ echo " owner = $o"
+ echo " group = $g"
+
+ case "$m" in ????)
+ m=`echo $m|sed -e 's/^1/TCB,/' \
+ -e 's/^[23]/TCB,SGID,/' \
+ -e 's/^[45]/TCB,SUID,/' \
+ -e 's/^[67]/TCB,SUID,SGID,/'`;; # vtx bit ignored
+ esac
+ echo " mode = $m"
+ case "$t" in
+ f) if test ! -f "$pp_destdir$p"; then
+ pp_error "$p: missing file"
+ fi
+ case "$flags" in
+ *v*)
+ echo " size = VOLATILE"
+ echo " checksum = VOLATILE"
+ ;;
+ *)
+ if test -r "$pp_destdir$p"; then
+ echo " size = $size"
+ pp_verbose sum -r < "$pp_destdir$p" |
+ sed -e 's/.*/ checksum = "&"/'
+ fi
+ ;;
+ esac;;
+ s)
+ echo " target = $st"
+ ;;
+ esac
+
+ #-- Record ABI types seen
+ case "$t" in
+ f) if test -r "$pp_destdir$p"; then
+ case "`file "$pp_destdir$p"`" in
+ *": executable (RISC System/6000)"*) abi=ppc;;
+ *": 64-bit XCOFF executable"*) abi=ppc64;;
+ *) abi=;;
+ esac
+ if test -n "$abi"; then
+ pp_add_to_list pp_aix_abis_seen $abi
+ fi
+ fi;;
+ esac
+
+ done
+}
+
+pp_aix_depend ()
+{
+ if test -s "$1"; then
+ pp_warn "aix dependencies not implemented"
+ fi
+}
+
+pp_aix_add_service () {
+ typeset svc cmd_cmd cmd_arg f
+ svc="$1"
+
+ pp_load_service_vars $svc
+
+ set -- $cmd
+ cmd_cmd="$1"; shift
+ cmd_arg="$*";
+
+ case "$stop_signal" in
+ HUP) stop_signal=1;;
+ INT) stop_signal=2;;
+ QUIT) stop_signal=3;;
+ KILL) stop_signal=9;;
+ TERM) stop_signal=15;;
+ USR1) stop_signal=30;;
+ USR2) stop_signal=31;;
+ "")
+ pp_error "%service $svc: stop_signal not set";;
+ [a-zA-Z]*)
+ pp_error "%service $svc: bad stop_signal ($stop_signal)";;
+ esac
+
+ test -z "$pidfile" || pp_error "aix requires empty pidfile (non daemon)"
+
+ pp_add_component run
+ if test "$user" = "root"; then
+ uid=0
+ else
+ uid="\"\`/usr/bin/id -u $user\`\""
+ fi
+
+
+ #-- add command text to create/remove the service
+ cat <<-. >> $pp_wrkdir/%post.run
+ # install service '$svc'
+ mkssys -s $svc -u $uid -p "$cmd_cmd" ${cmd_arg:+-a "$cmd_arg"} -O -S -n $stop_signal -f 9 ${pp_aix_mkssys_args} ${group:+-G "$group"}
+.
+
+ #-- add code to start the service on reboot
+ ${pp_aix_init_services_after_install} &&
+ cat <<-. >> $pp_wrkdir/%post.run
+ # start service '$svc' on reboot
+ mkitab "$svc:2:once:/usr/bin/startsrc -s $svc >/dev/console 2>&1"
+.
+
+ ${pp_aix_start_services_after_install} &&
+ cat <<-. >> $pp_wrkdir/%post.run
+ # start service '$svc' automatically after install
+ startsrc -s $svc
+.
+
+ ${pp_aix_init_services_after_install} &&
+ pp_prepend $pp_wrkdir/%preun.run <<-.
+ # stop starting service '$svc' at boot
+ rmitab $svc
+.
+ pp_prepend $pp_wrkdir/%preun.run <<-.
+ # stop service '$svc'
+ stopsrc -s $svc >/dev/null 2>&1
+ # uninstall service '$svc' from SRC
+ rmssys -s $svc
+.
+}
+
+pp_backend_aix () {
+ typeset briefex instuser instroot svc cmp outbff
+ typeset user_wrkdir root_wrkdir
+ typeset user_files root_files
+
+ test -n "$pp_destdir" ||
+ pp_error "AIX backend requires the '--destdir' option"
+
+ instuser="/usr/lpp/$name"
+ instroot="$instuser/inst_root"
+
+ # Here is the component mapping:
+ # run -> $name.rte ('Run time environment')
+ # doc -> $name.doc (non-standard)
+ # dev -> $name.adt ('Application developer toolkit')
+ # dbg -> $name.diag ('Diagnostics')
+
+ test `echo "$summary" | wc -c ` -gt 40 && pp_error "\$summary too long"
+
+ user_wrkdir=$pp_wrkdir/u
+ root_wrkdir=$pp_wrkdir/r
+ pp_verbose rm -rf $user_wrkdir $root_wrkdir
+ pp_verbose mkdir -p $user_wrkdir $root_wrkdir
+
+ for svc in $pp_services .; do
+ test . = "$svc" && continue
+ pp_aix_add_service $svc
+ done
+
+ {
+ echo "4 $pp_aix_arch I $name {"
+
+ for cmp in $pp_components; do
+ case "$cmp" in
+ run) ex=rte briefex="runtime";;
+ doc) ex=doc briefex="documentation";;
+ dev) ex=adt briefex="developer toolkit";;
+ dbg) ex=diag briefex="diagnostics";;
+ esac
+
+ user_files=$pp_wrkdir/%files.$cmp.u
+ root_files=$pp_wrkdir/%files.$cmp.r
+
+ pp_aix_select -user < $pp_wrkdir/%files.$cmp > $user_files
+ pp_aix_select -root < $pp_wrkdir/%files.$cmp > $root_files
+
+ # Default to USR only unless there are root files,
+ # or a post/pre/check script associated
+ content=U
+ if test -s $root_files \
+ -o -s $pp_wrkdir/%post.$cmp \
+ -o -s $pp_wrkdir/%preun.$cmp \
+ -o -s $pp_wrkdir/%check.$cmp
+ then
+ content=B
+ fi
+
+if $pp_opt_debug; then
+ echo "$cmp USER %files:"
+ cat $user_files
+ echo "$cmp ROOT %files:"
+ cat $root_files
+fi >&2
+
+ bosboot=N; pp_contains_any "$pp_aix_bosboot" $cmp && bosboot=b
+
+ echo $name.$ex \
+ ${pp_aix_version:-`pp_aix_version_fix "$version"`} \
+ 1 $bosboot $content \
+ $pp_aix_lang "$summary $briefex"
+ echo "["
+
+ pp_aix_depend $pp_wrkdir/%depend.$cmp
+
+ echo "%"
+
+ # generate per-directory size information
+ pp_aix_size < $user_files
+ pp_aix_size $instroot < $root_files
+
+ pp_aix_list < $user_files > $user_wrkdir/$name.$ex.al
+ pp_aix_list $instroot < $root_files >> $user_wrkdir/$name.$ex.al
+ pp_aix_list < $root_files > $root_wrkdir/$name.$ex.al
+
+if $pp_opt_debug; then
+ echo "$cmp USER $name.$ex.al:"
+ cat $user_wrkdir/$name.$ex.al
+ echo "$cmp ROOT $name.$ex.al:"
+ cat $root_wrkdir/$name.$ex.al
+fi >&2
+
+ pp_aix_inventory $name.$ex < $user_files \
+ > $user_wrkdir/$name.$ex.inventory
+ pp_aix_inventory $name.$ex < $root_files \
+ > $root_wrkdir/$name.$ex.inventory
+
+if $pp_opt_debug; then
+ pp_debug "$cmp USER $name.$ex.inventory:"
+ cat $user_wrkdir/$name.$ex.inventory
+ pp_debug "$cmp ROOT $name.$ex.inventory:"
+ cat $root_wrkdir/$name.$ex.inventory
+fi >&2
+
+ if test x"" != x"${pp_aix_copyright:-$copyright}"; then
+ echo "${pp_aix_copyright:-$copyright}" > $user_wrkdir/$name.$ex.copyright
+ echo "${pp_aix_copyright:-$copyright}" > $root_wrkdir/$name.$ex.copyright
+ fi
+
+ #-- assume that post/pre uninstall scripts only make
+ # sense when installed in a root context
+
+ if test -r $pp_wrkdir/%post.$cmp; then
+ pp_aix_make_script $root_wrkdir/$name.$ex.post_i \
+ < $pp_wrkdir/%post.$cmp
+ fi
+
+ if test -r $pp_wrkdir/%preun.$cmp; then
+ pp_aix_make_script $root_wrkdir/$name.$ex.unpost_i \
+ < $pp_wrkdir/%preun.$cmp
+ fi
+
+ if test -r $pp_wrkdir/%check.$cmp; then
+ #-- if this script exits false, then it should print a msg
+ pp_aix_make_script $root_wrkdir/$name.$ex.pre_i \
+ < $pp_wrkdir/%check.$cmp
+ fi
+
+ # remove empty files
+ for f in $user_wrkdir/$name.$ex.* $root_wrkdir/$name.$ex.*; do
+ if test ! -s "$f"; then
+ pp_debug "removing empty $f"
+ rm -f "$f"
+ fi
+ done
+
+ # copy/link the root files so we can do an easy backup later
+ pp_aix_copy_root $instroot < $root_files
+
+ echo "%"
+ echo "]"
+ done
+ echo "}"
+ } > $pp_wrkdir/lpp_name
+
+if $pp_opt_debug; then
+ echo "/lpp_name :"
+ cat $pp_wrkdir/lpp_name
+fi >&2
+
+ #-- copy the /lpp_name file to the destdir
+ pp_add_transient_file /lpp_name
+ cp $pp_wrkdir/lpp_name $pp_destdir/lpp_name
+
+ #-- copy the liblpp.a files under destdir for packaging
+ (cd $user_wrkdir && pp_verbose ar -c -g -r liblpp.a $name.*) ||
+ pp_error "ar error"
+ if test -s $user_wrkdir/liblpp.a; then
+ pp_add_transient_file $instuser/liblpp.a
+ pp_verbose cp $user_wrkdir/liblpp.a $pp_destdir$instuser/liblpp.a ||
+ pp_error "cannot create user liblpp.a"
+ fi
+ (cd $root_wrkdir && pp_verbose ar -c -g -r liblpp.a $name.*) ||
+ pp_error "ar error"
+ if test -s $root_wrkdir/liblpp.a; then
+ pp_add_transient_file $instroot/liblpp.a
+ pp_verbose cp $root_wrkdir/liblpp.a $pp_destdir$instroot/liblpp.a ||
+ pp_error "cannot create root liblpp.a"
+ fi
+
+ { echo ./lpp_name
+ test -s $user_wrkdir/liblpp.a && echo .$instuser/liblpp.a
+ test -s $root_wrkdir/liblpp.a && echo .$instroot/liblpp.a
+ cat $user_wrkdir/$name.*.al # includes the relocated root files!
+ } > $pp_wrkdir/bff.list
+
+ if test -n "$pp_aix_abis_seen" -a x"$pp_aix_arch_std" = x"auto"; then
+ case "$pp_aix_abis_seen" in
+ "ppc ppc64"|"ppc64 ppc")
+ pp_aix_arch_std=ppc64
+ ;;
+ ppc|ppc64)
+ pp_aix_arch_std=$pp_aix_abis_seen
+ ;;
+ *" "*)
+ pp_warn "multiple architectures detected: $pp_aix_abis_seen"
+ pp_aix_arch_std=unknown
+ ;;
+ "")
+ pp_warn "no binary executables detected; using noarch"
+ pp_aix_arch_std=noarch
+ ;;
+ *)
+ pp_warn "unknown architecture detected $pp_aix_abis_seen"
+ pp_aix_arch_std=$pp_aix_abis_seen
+ ;;
+ esac
+ fi
+
+ . $pp_wrkdir/%fixup
+
+ outbff=`pp_backend_aix_names`
+ pp_debug "creating: $pp_wrkdir/$outbff"
+ (cd $pp_destdir && pp_verbose /usr/sbin/backup -i -q -p -f -) \
+ < $pp_wrkdir/bff.list \
+ > $pp_wrkdir/$outbff || pp_error "backup failed"
+ ${SUDO:-sudo} /usr/sbin/installp -l -d $pp_wrkdir/$outbff
+}
+
+pp_backend_aix_cleanup () {
+ :
+}
+
+pp_backend_aix_names () {
+ echo "$name.${pp_aix_version:-`pp_aix_version_fix "$version"`}.bff"
+}
+
+pp_backend_aix_install_script () {
+ typeset pkgname platform
+ #
+ # The script should take a first argument being the
+ # operation; further arguments refer to components or services
+ #
+ # list-components -- lists components in the pkg
+ # install component... -- installs the components
+ # uninstall component... -- uninstalles the components
+ # list-services -- lists the services in the pkg
+ # start service... -- starts the name service
+ # stop service... -- stops the named services
+ # print-platform -- prints the platform group
+ #
+ pkgname="`pp_backend_aix_names`"
+ platform="`pp_backend_aix_probe`" # XXX should be derived from files
+
+ fsets=
+ for cmp in $pp_components; do
+ case "$cmp" in
+ run) ex=rte;;
+ doc) ex=doc;;
+ dev) ex=adt;;
+ dbg) ex=diag;;
+ esac
+ fsets="$fsets $name.$ex"
+ done
+
+ echo '#!/bin/sh'
+ pp_install_script_common
+
+ cat <<-.
+
+ cpt_to_fileset () {
+ test x"\$*" = x"all" &&
+ set -- $pp_components
+ for cpt
+ do
+ case "\$cpt" in
+ run) echo "$name.rte";;
+ doc) echo "$name.doc";;
+ dev) echo "$name.adt";;
+ dbg) echo "$name.diag";;
+ *) usage;;
+ esac
+ done
+ }
+
+ test \$# -eq 0 && usage
+ op="\$1"; shift
+
+ case "\$op" in
+ list-components)
+ test \$# -eq 0 || usage \$op
+ echo "$pp_components"
+ ;;
+ list-services)
+ test \$# -eq 0 || usage \$op
+ echo "$pp_services"
+ ;;
+ list-files)
+ test \$# -ge 1 || usage \$op
+ echo \${PP_PKGDESTDIR:-.}/$pkgname
+ ;;
+ install)
+ test \$# -ge 1 || usage \$op
+ verbose /usr/sbin/installp -acX -V0 -F \
+ -d \${PP_PKGDESTDIR:-.}/$pkgname \
+ \`cpt_to_fileset "\$@"\`
+ ;;
+ uninstall)
+ test \$# -ge 1 || usage \$op
+ verbose /usr/sbin/installp -u -e/dev/null \
+ -V0 \`cpt_to_fileset "\$@"\`
+ ;;
+ start|stop)
+ test \$# -ge 1 || usage \$op
+ ec=0
+ for svc
+ do
+ verbose \${op}src -s \$svc || ec=1
+ done
+ exit \$ec
+ ;;
+ print-platform)
+ echo "$platform"
+ ;;
+ *)
+ usage;;
+ esac
+.
+}
+
+pp_backend_aix_init_svc_vars () {
+ :
+}
+
+pp_backend_aix_probe () {
+ echo "${pp_aix_os}-${pp_aix_arch_std}"
+}
+
+pp_backend_aix_vas_platforms () {
+ case "${pp_aix_arch_std}" in
+ ppc*) :;;
+ *) pp_die "unknown architecture ${pp_aix_arch_std}";;
+ esac
+ case "${pp_aix_os}" in
+ aix43) echo "aix-43";;
+ aix51) echo "aix-51 aix-43";;
+ aix52) echo "aix-51 aix-43";;
+ aix53) echo "aix-53 aix-51 aix-43";;
+ aix61) echo "aix-53 aix-51 aix-43";;
+ *) pp_die "unknown system ${pp_aix_os}";;
+ esac
+}
+pp_backend_aix_function () {
+ case $1 in
+ pp_mkgroup) cat <<'.';;
+ /usr/sbin/lsgroup "$1" >/dev/null &&
+ return 0
+ echo "Creating group $1"
+ /usr/bin/mkgroup -A "$1"
+.
+ pp_mkuser:depends) echo pp_mkgroup;;
+ pp_mkuser) cat <<'.';;
+ /usr/sbin/lsuser "$1" >/dev/null &&
+ return 0
+ pp_mkgroup "${2:-$1}" || return 1
+ echo "Creating user $1"
+ /usr/bin/mkuser \
+ login=false \
+ rlogin=false \
+ account_locked=true \
+ home="${3:-/nohome.$1}" \
+ pgrp="${2:-$1}" \
+ "$1"
+.
+ pp_havelib) cat <<'.';;
+ case "$2" in
+ "") pp_tmp_name="lib$1.so";;
+ *.*.*) pp_tmp_name="lib$1.so.$2";;
+ *.*) pp_tmp_name="lib$1.so.$2.0";;
+ *) pp_tmp_name="lib$1.so.$2";;
+ esac
+ for pp_tmp_dir in `echo "/usr/lib:/lib${3:+:$3}" | tr : ' '`; do
+ test -r "$pp_tmp_dir/$pp_tmp_name" -a \
+ -r "$pp_tmp_dir/lib$1.so" && return 0
+ done
+ return 1
+.
+ *) false;;
+ esac
+}
+
+pp_platforms="$pp_platforms sd"
+
+pp_backend_sd_detect () {
+ test x"$1" = x"HP-UX"
+}
+
+pp_backend_sd_init () {
+ pp_sd_sudo=sudo # FIXME: argh why is hpux so braindead
+ pp_sd_startlevels=2
+ pp_sd_stoplevels=auto
+ pp_sd_config_file=
+ pp_sd_vendor=
+ pp_sd_vendor_tag=Quest
+ pp_sd_default_start=1 # config_file default start value
+
+ pp_readlink_fn=pp_ls_readlink # HPUX has no readlink
+
+ pp_sd_detect_os
+}
+
+pp_sd_detect_os () {
+ typeset revision
+
+ revision=`uname -r`
+ pp_sd_os="${revision#?.}"
+ test -z "$pp_sd_os" &&
+ pp_warn "cannot detect OS version"
+ pp_sd_os_std="hpux`echo $pp_sd_os | tr -d .`"
+
+ case "`uname -m`" in
+ 9000/[678]??) pp_sd_arch_std=hppa;;
+ ia64) pp_sd_arch_std=ia64;;
+ *) pp_sd_arch_std=unknown;;
+ esac
+}
+
+pp_sd_write_files () {
+ typeset t m o g f p st line dm
+ while read t m o g f p st; do
+ line=" file"
+ case "$f" in *v*) line="$line -v";; esac # FIXME for uninstall
+ case $t in
+ f) dm=644;;
+ d) line="$line -t d"; p=${p%/}; dm=755;;
+ s) line="$line -t s";;
+ esac
+
+ test x"$o" = x"-" && o=bin
+ test x"$g" = x"-" && g=bin
+ test x"$m" = x"-" && m=$dm
+
+ case $t in
+ s) echo "$line $st $p";;
+ *) echo "$line -o $o -g $g -m $m $pp_destdir$p $p";;
+ esac
+
+ done
+}
+
+pp_sd_service_group_script () {
+ typeset grp svcs scriptpath out
+ grp="$1"
+ svcs="$2"
+ scriptpath="/sbin/init.d/$grp"
+ out="$pp_destdir$scriptpath"
+
+ pp_add_file_if_missing $scriptpath run 755 || return 0
+
+ cat <<-. > $out
+ #!/sbin/sh
+ # generated by pp $pp_version
+ svcs="$svcs"
+.
+
+ cat <<-'.' >> $out
+ #-- starts services in order.. stops them all if any break
+ pp_start () {
+ undo=
+ for svc in $svcs; do
+ /sbin/init.d/$svc start
+ case $? in
+ 0|4)
+ undo="$svc $undo"
+ ;;
+ *)
+ if test -n "$undo"; then
+ for svc in $undo; do
+ /sbin/init.d/$svc stop
+ done
+ return 1
+ fi
+ ;;
+ esac
+ done
+ return 0
+ }
+
+ #-- stops services in reverse
+ pp_stop () {
+ reverse=
+ for svc in $svcs; do
+ reverse="$svc $reverse"
+ done
+ rc=0
+ for svc in $reverse; do
+ /sbin/init.d/$svc stop || rc=$?
+ done
+ return $rc
+ }
+
+ case $1 in
+ start_msg) echo "Starting $svcs";;
+ stop_msg) echo "Stopping $svcs";;
+ start) pp_start;;
+ stop) pp_stop;;
+ *) echo "usage: $0 {start|stop|start_msg|stop_msg}"
+ exit 1;;
+ esac
+.
+}
+
+pp_sd_service_script () {
+ typeset svc config_file config_value scriptpath out
+
+ svc="$1"
+ scriptpath="/sbin/init.d/$svc"
+
+ config_file=${pp_sd_config_file:-/etc/rc.config.d/$name}
+ sd_config_var=`echo start-$svc | tr '[a-z]-' '[A-Z]_'`
+ sd_config_value=${pp_sd_default_start:-0}
+ pp_load_service_vars "$svc"
+
+ test -n "$user" -a x"$user" != x"root" &&
+ cmd="SHELL=/usr/bin/sh /usr/bin/su $user -c \"exec `echo $cmd | sed -e 's,[$\\\`],\\&,g'`\""
+ if test -z "$pidfile"; then
+ pidfile="/var/run/$svc.pid"
+ cmd="$cmd & echo \$! > \$pidfile"
+ fi
+
+pp_debug "config file is $config_file"
+
+ pp_add_file_if_missing $scriptpath run 755
+ pp_add_file_if_missing $config_file run 644 v
+
+ cat <<-. >> $pp_destdir$config_file
+
+ # Controls whether the $svc service is started
+ $sd_config_var=$sd_config_value
+.
+
+ cat <<. > $pp_destdir$scriptpath
+
+ svc="$svc"
+ pidfile="$pidfile"
+ config_file="$config_file"
+
+ pp_start () {
+ $cmd
+ }
+
+ pp_disabled () {
+ test \${$sd_config_var:-0} -eq 0
+ }
+
+.
+
+ cat <<'.' >>$pp_destdir$scriptpath
+
+ pp_stop () {
+ if test ! -s "$pidfile"; then
+ echo "Unable to stop $svc (no pid file)"
+ return 1
+ else
+ read pid < "$pidfile"
+ if kill -0 "$pid" 2>/dev/null; then
+ if kill -${stop_signal:-TERM} "$pid"; then
+ rm -f "$pidfile"
+ return 0
+ else
+ echo "Unable to stop $svc"
+ return 1
+ fi
+ else
+ rm -f "$pidfile"
+ return 0
+ fi
+ fi
+ }
+
+ pp_running () {
+ if test ! -s "$pidfile"; then
+ return 1
+ else
+ read pid < "$pidfile"
+ kill -0 "$pid" 2>/dev/null
+ fi
+ }
+
+ case $1 in
+ start_msg) echo "Starting the $svc service";;
+ stop_msg) echo "Stopping the $svc service";;
+ start)
+ if test -f "$config_file"; then
+ . $config_file
+ fi
+ if pp_disabled; then
+ exit 2
+ elif pp_running; then
+ echo "$svc already running";
+ exit 0
+ elif pp_start; then
+ echo "$svc started";
+ # rc(1M) says we should exit 4, but nobody expects it!
+ exit 0
+ else
+ exit 1
+ fi;;
+ stop) if pp_stop; then
+ echo "$svc stopped";
+ exit 0
+ else
+ exit 1
+ fi;;
+ *) echo "usage: $0 {start|stop|start_msg|stop_msg}"
+ exit 1;;
+ esac
+.
+}
+
+pp_sd_make_service () {
+ typeset level startpriority stoppriority startlevels stoplevels
+ typeset svc svcvar
+
+ svc="$1"
+ svcvar=`pp_makevar $svc`
+
+ # TODO: Figure out why this check is here
+ #-- don't do anything if the script exists
+ #if test -s "$pp_destdir/sbin/init.d/$svc"; then
+ # pp_error "$pp_destdir/sbin/init.d/$svc exists"
+ # return
+ #fi
+
+ # symlink the script, depending on the priorities chosen
+ eval startpriority='${pp_sd_startpriority_'$svcvar'}'
+ eval stoppriority='${pp_sd_stoppriority_'$svcvar'}'
+ test -z "$startpriority" && startpriority="${pp_sd_startpriority:-50}"
+ test -z "$stoppriority" && stoppriority="${pp_sd_stoppriority:-50}"
+
+ eval startlevels='${pp_sd_startlevels_'$svcvar'}'
+ test -z "$startlevels" && startlevels="$pp_sd_startlevels"
+
+ eval stoplevels='${pp_sd_stoplevels_'$svcvar'}'
+ test -z "$stoplevels" && stoplevels="$pp_sd_stoplevels"
+
+ # create the script and config file
+ pp_sd_service_script $svc
+
+ # fix the priority up
+ case "$startpriority" in
+ ???) :;;
+ ??) startpriority=0$startpriority;;
+ ?) startpriority=00$startpriority;;
+ esac
+ case "$stoppriority" in
+ ???) :;;
+ ??) stoppriority=0$stoppriority;;
+ ?) stoppriority=00$stoppriority;;
+ esac
+
+ if test x"$stoplevels" = x"auto"; then
+ stoplevels=
+ test -z "$startlevels" || for level in $startlevels; do
+ stoplevels="$stoplevels `expr $level - 1`"
+ done
+ fi
+
+ # create the symlinks
+ test -z "$startlevels" || for level in $startlevels; do
+ echo " file -t s" \
+ "/sbin/init.d/$svc" \
+ "/sbin/rc$level.d/S$startpriority$svc"
+ done
+ test -z "$stoplevels" || for level in $stoplevels; do
+ echo " file -t s" \
+ "/sbin/init.d/$svc" \
+ "/sbin/rc$level.d/K$stoppriority$svc"
+ done
+}
+
+pp_sd_control () {
+ typeset ctrl script
+ typeset cpt
+
+ ctrl="$1"; shift
+ cpt="$1"; shift
+ script="$pp_wrkdir/control.$ctrl.$cpt"
+ cat <<. >$script
+.
+ cat "$@" >> $script
+ echo "exit 0" >> $script
+ /usr/bin/chmod +x $script
+ echo " $ctrl $script"
+}
+
+pp_backend_sd () {
+ typeset psf cpt svc outfile
+
+ psf=$pp_wrkdir/psf
+
+ echo "depot" > $psf
+ echo "layout_version 1.0" >>$psf
+
+ #-- vendor
+ cat <<. >>$psf
+ vendor
+ tag $pp_sd_vendor_tag
+ title "${pp_sd_vendor:-$vendor}"
+
+ product
+ tag $name
+ revision $version
+ vendor_tag $pp_sd_vendor_tag
+ is_patch false
+ title "$summary"
+ copyright "$copyright"
+ machine_type *
+ os_name HP-UX
+ os_release ?.11.*
+ os_version ?
+ directory /
+ is_locatable false
+.
+ test -n "$description" && cat <<. >>$psf
+ description "$description"
+.
+
+ # make convenience service groups
+ if test -n "$pp_service_groups"; then
+ for grp in $pp_service_groups; do
+ pp_sd_service_group_script \
+ $grp "`pp_service_get_svc_group $grp`"
+ done
+ fi
+
+ for cpt in $pp_components; do
+ cat <<. >>$psf
+ fileset
+ tag $cpt
+ title $cpt
+.
+
+ #-- make sure services are shut down during uninstall
+ if test $cpt = run -a -n "$pp_services"; then
+ for svc in $pp_services; do
+ pp_prepend $pp_wrkdir/%preun.$cpt <<-.
+ /sbin/init.d/$svc stop
+.
+ done
+ fi
+
+ #-- we put the post/preun code into configure/unconfigure
+ # and not postinstall/preremove, because configure/unconfigure
+ # scripts are run on the hosts where the package is installed,
+ # not loaded (a subtle difference).
+ test -s $pp_wrkdir/%post.$cpt &&
+ pp_sd_control configure $cpt $pp_wrkdir/%post.$cpt >> $psf
+ test -s $pp_wrkdir/%preun.$cpt &&
+ pp_sd_control unconfigure $cpt $pp_wrkdir/%preun.$cpt >> $psf
+ test -s $pp_wrkdir/%check.$cpt &&
+ pp_sd_control checkinstall $cpt $pp_wrkdir/%check.$cpt >> $psf
+
+ if test $cpt = run -a -n "$pp_services"; then
+ for svc in $pp_services; do
+ #-- service names are 10 chars max on hpux
+ case "$svc" in ???????????*)
+ pp_warn "service name '$svc' is too long for hpux";;
+ esac
+ pp_sd_make_service $svc >> $psf
+ done
+ #pp_sd_make_service_config
+ fi
+
+ pp_sd_write_files < $pp_wrkdir/%files.$cpt >> $psf
+
+ #-- end fileset clause
+ cat <<. >>$psf
+ end
+.
+
+ done
+
+ #-- end product clause
+ cat <<. >>$psf
+ end
+.
+
+ $pp_opt_debug && cat $psf >&2
+
+ test -s $pp_wrkdir/%fixup && . $pp_wrkdir/%fixup
+
+ outfile=`pp_backend_sd_names`
+ if pp_verbose ${pp_sd_sudo} /usr/sbin/swpackage \
+ -s $psf \
+ -x run_as_superuser=false \
+ -x media_type=tape \
+ @ $pp_wrkdir/$outfile
+ then
+ pp_verbose ${pp_sd_sudo} /usr/sbin/swlist -l file -s $pp_wrkdir/$outfile
+ else
+ pp_error "swpackage failed"
+ fi
+}
+
+pp_backend_sd_cleanup () {
+ :
+}
+
+pp_backend_sd_names () {
+ echo "$name-$version.$pp_sd_arch_std.depot"
+}
+
+pp_backend_sd_install_script () {
+ typeset pkgname platform
+
+ pkgname=`pp_backend_sd_names`
+ platform="`pp_backend_sd_probe`"
+
+ echo "#!/bin/sh"
+ pp_install_script_common
+ cat <<.
+
+ cpt_to_tags () {
+ test x"\$*" = x"all" && set -- $pp_components
+ for cpt
+ do
+ echo "$name.\$cpt"
+ done
+ }
+
+ test \$# -eq 0 && usage
+ op="\$1"; shift
+
+ case "\$op" in
+ list-components)
+ test \$# -eq 0 || usage \$op
+ echo "$pp_components"
+ ;;
+ list-services)
+ test \$# -eq 0 || usage \$op
+ echo "$pp_services"
+ ;;
+ list-files)
+ test \$# -ge 1 || usage \$op
+ echo \${PP_PKGDESTDIR:-.}/$pkgname
+ ;;
+ install)
+ test \$# -ge 1 || usage \$op
+ verbose /usr/sbin/swinstall -x verbose=0 \
+ -s \${PP_PKGDESTDIR:-\`pwd\`}/$pkgname \
+ \`cpt_to_tags "\$@"\`
+ ;;
+ uninstall)
+ test \$# -ge 1 || usage \$op
+ verbose /usr/sbin/swremove -x verbose=0 \
+ \`cpt_to_tags "\$@"\`
+ ;;
+ start|stop)
+ test \$# -ge 1 || usage \$op
+ ec=0
+ for svc
+ do
+ verbose /sbin/init.d/\$svc \$op
+ [ \$? -eq 4 -o \$? -eq 0 ] || ec=1
+ done
+ exit \$ec
+ ;;
+ print-platform)
+ echo "$platform"
+ ;;
+ *)
+ usage
+ ;;
+ esac
+.
+}
+
+pp_backend_sd_probe () {
+ echo "${pp_sd_os_std}-${pp_sd_arch_std}"
+}
+
+pp_backend_sd_vas_platforms () {
+ case "`pp_backend_sd_probe`" in
+ hpux*-hppa) echo hpux-pa;;
+ hpux*-ia64) echo hpux-ia64 hpux-pa;;
+ *) pp_die "unknown system `pp_backend_sd_probe`";;
+ esac
+}
+
+pp_backend_sd_init_svc_vars () {
+ :
+}
+pp_backend_sd_function () {
+ case $1 in
+ pp_mkgroup) cat <<'.';;
+ /usr/sbin/groupmod "$1" 2>/dev/null ||
+ /usr/sbin/groupadd "$1"
+.
+ pp_mkuser:depends) echo pp_mkgroup;;
+ pp_mkuser) cat <<'.';;
+ pp_mkgroup "${2:-$1}" || return 1
+ /usr/sbin/useradd \
+ -g "${2:-$1}" \
+ -d "${3:-/nonexistent}" \
+ -s "${4:-/bin/false}" \
+ "$1"
+.
+ pp_havelib) cat <<'.';;
+ for pp_tmp_dir in `echo /usr/lib${3:+:$3} | tr : ' '`; do
+ test -r "$pp_tmp_dir/lib$1${2:+.$2}.sl" && return 0
+ done
+ return 1
+.
+ *) false;;
+ esac
+}
+
+pp_platforms="$pp_platforms solaris"
+
+pp_backend_solaris_detect () {
+ test x"$1" = x"SunOS"
+}
+
+pp_backend_solaris_init () {
+ pp_solaris_category=
+ pp_solaris_istates="s S 1 2 3" # run-states when install is ok
+ pp_solaris_rstates="s S 1 2 3" # run-states when remove is ok
+ pp_solaris_vendor=
+ pp_solaris_copyright=
+ pp_solaris_name=
+ pp_solaris_desc=
+ pp_solaris_package_arch=auto
+
+ pp_solaris_detect_os
+ pp_solaris_detect_arch
+
+ pp_solaris_init_svc
+
+ #-- readlink not reliably available on Solaris
+ pp_readlink_fn=pp_ls_readlink
+}
+
+pp_solaris_detect_os () {
+ typeset osrel
+
+ osrel=`/usr/bin/uname -r`
+ case "$osrel" in
+ 5.[0-6]) pp_solaris_os="sol2${osrel#5.}";;
+ 5.*) pp_solaris_os="sol${osrel#5.}";;
+ esac
+ test -z "$pp_solaris_os" &&
+ pp_warn "can't determine OS suffix from uname -r"
+
+}
+
+pp_solaris_detect_arch () {
+ pp_solaris_arch=`/usr/bin/optisa amd64 sparcv9 i386 sparc`
+ [ -z "$pp_solaris_arch" ] &&
+ pp_error "can't determine processor architecture"
+ case "$pp_solaris_arch" in
+ amd64) pp_solaris_arch_std=x86_64;;
+ i386) pp_solaris_arch_std=i386;;
+ sparcv9) pp_solaris_arch_std=sparc64;;
+ sparc) pp_solaris_arch_std=sparc;;
+ *) pp_solaris_arch_std=unknown;;
+ esac
+}
+
+pp_solaris_is_request_script_necessary () {
+ typeset has_optional_services
+
+ has_optional_services=no
+ for _svc in $pp_services; do
+ pp_load_service_vars $_svc
+ if test "$optional" = "yes"; then
+ has_optional_services=yes
+ fi
+ done
+
+ # If the package has no optional services and only one component, don't
+ # create a request script at all.
+ if test "$has_optional_services" = "no" &&
+ test `echo $pp_components | wc -w` -eq 1; then
+ return 1 # no
+ fi
+
+ return 0 # yes
+}
+
+pp_solaris_request () {
+ typeset _cmp _svc
+
+ #-- The common part of the request script contains the ask() function
+ # and resets the CLASSES list to empty
+ cat <<'.'
+ trap 'exit 3' 15
+ ask () {
+ ans=`ckyorn -d "$1" \
+ -p "Do you want to $2"` \
+ || exit $?
+ case "$ans" in y*|Y*) return 0;; *) return 1;; esac
+ }
+ CLASSES=
+.
+ #-- each of our components adds itself to the CLASSES list
+ for _cmp in $pp_components; do
+ case "$_cmp" in
+ run) :;;
+ doc) echo 'ask y "install the documentation files" &&';;
+ dev) echo 'ask y "install the development files" &&';;
+ dbg) echo 'ask n "install the diagnostic files" &&';;
+ esac
+ echo ' CLASSES="$CLASSES '$_cmp'"'
+ done
+
+ #-- the request script writes the CLASSES var to its output
+ cat <<'.'
+ echo "CLASSES=$CLASSES" > $1
+.
+
+ if test -n "$pp_services"; then
+ echo 'SERVICES='
+ for _svc in $pp_services; do
+ pp_load_service_vars $_svc
+ if test "$enable" = "yes"; then
+ _default_prompt=y
+ else
+ _default_prompt=n
+ fi
+ if test "$optional" = "yes"; then
+ echo 'ask '$_default_prompt' "install '$_svc' service" &&'
+ fi
+ echo ' SERVICES="$SERVICES '$_svc'"'
+ done
+ echo 'echo "SERVICES=$SERVICES" >> $1'
+ fi
+
+}
+
+pp_solaris_procedure () {
+ cat <<.
+
+ #-- $2 for $1 component of $name
+ case " \$CLASSES " in *" $1 "*)
+.
+ cat
+ cat <<.
+ ;; esac
+.
+}
+
+pp_solaris_depend () {
+ typeset _name _vers
+ while read _name _vers; do
+ if test -n "$_name"; then
+ echo "P $_name $_name"
+ test -n "$_vers" && echo " $_vers"
+ fi
+ done
+}
+
+pp_solaris_space() {
+ echo "$2:$3:$1" >> $pp_wrkdir/space.cumulative
+}
+
+pp_solaris_sum_space () {
+ if test -s $pp_wrkdir/space.cumulative; then
+ sort -t: +2 < $pp_wrkdir/space.cumulative |
+ awk -F: 'NR==1{n=$3}{if($3==n){b+=$1;i+=$2}else{print n" "b" "i;b=$1;i=$2;n=$3}}END{print n" "b" "i}' > $pp_wrkdir/space
+ fi
+}
+
+pp_solaris_proto () {
+ typeset t m o g f p st
+ typeset abi
+
+ while read t m o g f p st; do
+ if test x"$o" = x"-"; then
+ o="bin"
+ fi
+ if test x"$g" = x"-"; then
+ g="bin"
+ fi
+ case "$t" in
+ f) test x"$m" = x"-" && m=444
+ case "$f" in
+ *v*) echo "v $1 $p=$pp_destdir$p $m $o $g";;
+ *) echo "f $1 $p=$pp_destdir$p $m $o $g";;
+ esac
+ if test -r "$pp_destdir$p"; then
+ #-- Use file to record ABI types seen
+ case "`file "$pp_destdir$p"`" in
+ *"ELF 32"*80386*) abi=i386;;
+ *"ELF 64"*AMD*) abi=x86_64;;
+ *"ELF 32"*SPARC*) abi=sparc;;
+ *"ELF 64"*SPARC*) abi=sparc64;;
+ *) abi=;;
+ esac
+ if test -n "$abi"; then
+ pp_add_to_list pp_solaris_abis_seen $abi
+ fi
+ fi
+ ;;
+ d) test x"$m" = x"-" && m=555
+ echo "d $1 $p $m $o $g"
+ ;;
+ s) test x"$m" = x"-" && m=777
+ test x"$m" = x"777" ||
+ pp_warn "$p: invalid mode $m for symlink, should be 777 or -"
+ echo "s $1 $p=$st $m $o $g"
+ ;;
+ esac
+ done
+}
+
+pp_backend_solaris () {
+ typeset _cmp _svc _grp
+
+ prototype=$pp_wrkdir/prototype
+ : > $prototype
+
+ pkginfo=$pp_wrkdir/pkginfo
+ : > $pkginfo
+ echo "i pkginfo=$pkginfo" >> $prototype
+
+ case "${pp_solaris_name:-$name}" in
+ [0-9]*)
+ pp_error "Package name '${pp_solaris_name:-$name}'" \
+ "cannot start with a number"
+ ;;
+ ???????????????*)
+ pp_warn "Package name '${pp_solaris_name:-$name}'" \
+ "too long for Solaris 2.6 or 2.7 (max 9 characters)"
+ ;;
+ ??????????*)
+ pp_warn "Package name '${pp_solaris_name:-$name}'" \
+ "too long for 2.7 Solaris (max 9 characters)"
+ ;;
+ esac
+
+ #-- generate the package info file
+ echo "VERSION=$version" >> $pkginfo
+ echo "PKG=${pp_solaris_name:-$name}" >> $pkginfo
+ echo "CLASSES=$pp_components" >> $pkginfo
+ echo "BASEDIR=/" >> $pkginfo
+ echo "NAME=$name $version" >> $pkginfo
+ echo "CATEGORY=${pp_solaris_category:-application}" >> $pkginfo
+
+ desc="${pp_solaris_desc:-$description}"
+ test -n "$desc" &&
+ echo "DESC=$desc" >> $pkginfo
+
+ test -n "$pp_solaris_rstates" &&
+ echo "RSTATES=$pp_solaris_rstates" >> $pkginfo
+ test -n "$pp_solaris_istates" &&
+ echo "ISTATES=$pp_solaris_istates" >> $pkginfo
+ test -n "${pp_solaris_vendor:-$vendor}" &&
+ echo "VENDOR=${pp_solaris_vendor:-$vendor}" >> $pkginfo
+
+ if test -n "${pp_solaris_copyright:-$copyright}"; then
+ echo "${pp_solaris_copyright:-$copyright}" > $pp_wrkdir/copyright
+ echo "i copyright=$pp_wrkdir/copyright" >> $prototype
+ fi
+
+ #-- scripts to run before and after install
+ : > $pp_wrkdir/postinstall
+ : > $pp_wrkdir/preremove
+ for _cmp in $pp_components; do
+ #-- add the postinstall scripts in definition order
+ if test -s $pp_wrkdir/%post.$_cmp; then
+ pp_solaris_procedure $_cmp postinst < $pp_wrkdir/%post.$_cmp \
+ >> $pp_wrkdir/postinstall
+ fi
+ #-- add the preremove rules in reverse definition order
+ if test -s $pp_wrkdir/%preun.$_cmp; then
+ pp_solaris_procedure $_cmp preremove < $pp_wrkdir/%preun.$_cmp |
+ pp_prepend $pp_wrkdir/preremove
+ fi
+ #-- Add the check script in definition order
+ if test -s $pp_wrkdir/%check.$_cmp; then
+ pp_solaris_procedure $_cmp checkinstall \
+ < $pp_wrkdir/%check.$_cmp \
+ >> $pp_wrkdir/checkinstall
+ fi
+ #-- All dependencies are merged together for Solaris pkgs
+ test -s $pp_wrkdir/%depend.$_cmp &&
+ pp_solaris_depend < $pp_wrkdir/%depend.$_cmp > $pp_wrkdir/depend
+ done
+
+
+ if pp_solaris_is_request_script_necessary; then
+ pp_solaris_request > $pp_wrkdir/request
+ fi
+
+ test -n "$pp_services" &&
+ for _svc in $pp_services; do
+ pp_load_service_vars $_svc
+ pp_solaris_make_service $_svc
+ pp_solaris_install_service $_svc >> $pp_wrkdir/postinstall
+ pp_prepend $pp_wrkdir/preremove <<-.
+ /etc/init.d/$_svc stop >/dev/null 2>/dev/null
+.
+ done
+
+ test -n "$pp_service_groups" &&
+ for _grp in $pp_service_groups; do
+ pp_solaris_make_service_group \
+ $_grp "`pp_service_get_svc_group $_grp`"
+ done
+
+ #-- if installf was used; we need to indicate a termination
+ grep installf $pp_wrkdir/postinstall >/dev/null &&
+ echo 'installf -f $PKGINST' >> $pp_wrkdir/postinstall
+
+ pp_solaris_sum_space
+
+ # NB: pkginfo and copyright are added earlier
+ for f in compver depend space checkinstall \
+ request preinstall postinstall \
+ preremove postremove; do
+ if test -s $pp_wrkdir/$f; then
+ case $f in
+ *install|*remove|request)
+ # turn scripts into a proper shell scripts
+ mv $pp_wrkdir/$f $pp_wrkdir/$f.tmp
+ { echo "#!/bin/sh";
+ echo "# $f script for ${pp_solaris_name:-$name}-$version"
+ cat $pp_wrkdir/$f.tmp
+ echo "exit 0"; } > $pp_wrkdir/$f
+ chmod +x $pp_wrkdir/$f
+ rm -f $pp_wrkdir/$f.tmp
+ ;;
+ esac
+ if $pp_opt_debug; then
+ pp_debug "contents of $f:"
+ cat $pp_wrkdir/$f >&2
+ fi
+ echo "i $f=$pp_wrkdir/$f" >> $prototype
+ fi
+ done
+
+ #-- create the prototype file which lists the files to install
+ # do this as late as possible because files could be added
+ pp_solaris_abis_seen=
+ for _cmp in $pp_components; do
+ pp_solaris_proto $_cmp < $pp_wrkdir/%files.$_cmp
+ done >> $prototype
+
+ if test x"$pp_solaris_package_arch" = x"auto"; then
+ if pp_contains "$pp_solaris_abis_seen" sparc64; then
+ pp_solaris_package_arch_std="sparc64"
+ echo "ARCH=sparcv9" >> $pkginfo
+ elif pp_contains "$pp_solaris_abis_seen" sparc; then
+ pp_solaris_package_arch_std="sparc"
+ echo "ARCH=sparc" >> $pkginfo
+ elif pp_contains "$pp_solaris_abis_seen" x86_64; then
+ pp_solaris_package_arch_std="x86_64"
+ echo "ARCH=amd64" >> $pkginfo
+ elif pp_contains "$pp_solaris_abis_seen" i386; then
+ pp_solaris_package_arch_std="i386"
+ echo "ARCH=i386" >> $pkginfo
+ else
+ pp_warn "No ELF files found: not supplying an ARCH type"
+ pp_solaris_package_arch_std="noarch"
+ fi
+ else
+ pp_solaris_package_arch_std="$pp_solaris_package_arch"
+ echo "ARCH=$pp_solaris_package_arch" >> $pkginfo
+ fi
+
+ mkdir $pp_wrkdir/pkg
+
+ . $pp_wrkdir/%fixup
+
+if $pp_opt_debug; then
+ echo "$pkginfo::"; cat $pkginfo
+ echo "$prototype::"; cat $prototype
+fi >&2
+
+ pkgmk -a $pp_solaris_arch -d $pp_wrkdir/pkg \
+ -f $prototype || { error "pkgmk failed"; return; }
+ pkgtrans -s $pp_wrkdir/pkg \
+ $pp_wrkdir/`pp_backend_solaris_names` \
+ ${pp_solaris_name:-$name} \
+ || { error "pkgtrans failed"; return; }
+}
+
+pp_backend_solaris_cleanup () {
+ :
+}
+
+pp_backend_solaris_names () {
+ echo ${pp_solaris_name:-$name}-$version-${pp_solaris_package_arch_std:-$pp_solaris_arch}.pkg
+}
+
+pp_backend_solaris_install_script () {
+ typeset pkgname platform
+
+ platform="${pp_solaris_os:-solaris}-${pp_solaris_package_arch_std:-$pp_solaris_arch}"
+
+ echo "#! /sbin/sh"
+ pp_install_script_common
+ pkgname=`pp_backend_solaris_names`
+
+ cat <<.
+ tmpnocheck=/tmp/nocheck\$\$
+ tmpresponse=/tmp/response\$\$
+ trap 'rm -f \$tmpnocheck \$tmpresponse' 0
+
+ make_tmpfiles () {
+ cat <<-.. > \$tmpresponse
+ CLASSES=\$*
+ SERVICES=$pp_services
+..
+ cat <<-.. > \$tmpnocheck
+ mail=
+ instance=overwrite
+ partial=nocheck
+ runlevel=nocheck
+ idepend=nocheck
+ rdepend=nocheck
+ space=nocheck
+ setuid=nocheck
+ conflict=nocheck
+ action=nocheck
+ basedir=default
+..
+ }
+
+ test \$# -eq 0 && usage
+ op="\$1"; shift
+
+ case "\$op" in
+ list-components)
+ test \$# -eq 0 || usage \$op
+ echo "$pp_components"
+ ;;
+ list-services)
+ test \$# -eq 0 || usage \$op
+ echo "$pp_services"
+ ;;
+ list-files)
+ test \$# -ge 1 || usage \$op
+ echo \${PP_PKGDESTDIR:-.}/$pkgname
+ ;;
+ install)
+ test \$# -ge 1 || usage \$op
+ make_tmpfiles "\$@"
+ verbose /usr/sbin/pkgadd -n -d \${PP_PKGDESTDIR:-.}/$pkgname \
+ -r \$tmpresponse \
+ -a \$tmpnocheck \
+ ${pp_solaris_name:-$name}
+ ;;
+ uninstall)
+ test \$# -ge 1 || usage \$op
+ make_tmpfiles "\$@"
+ verbose /usr/sbin/pkgrm -n \
+ -a \$tmpnocheck \
+ ${pp_solaris_name:-$name}
+ ;;
+ start|stop)
+ test \$# -ge 1 || usage \$op
+ ec=0
+ for svc
+ do
+ verbose /etc/init.d/\$svc \$op || ec=1
+ done
+ exit \$ec
+ ;;
+ print-platform)
+ echo "$platform"
+ ;;
+ *)
+ usage
+ ;;
+ esac
+.
+}
+
+pp_solaris_dynlib_depend () {
+ xargs ldd 2>/dev/null |
+ sed -e '/^[^ ]*:$/d' -e 's,.*=>[ ]*,,' -e 's,^[ ]*,,' |
+ sort -u |
+ grep -v '^/usr/platform/' | (
+ set -- ""; shift
+ while read p; do
+ set -- "$@" -p "$p"
+ if [ $# -gt 32 ]; then
+ echo "$# is $#" >&2
+ pkgchk -l "$@"
+ set -- ""; shift
+ fi
+ done
+ [ $# -gt 0 ] && pkgchk -l "$@"
+ )|
+ awk '/^Current status:/{p=0} p==1 {print $1} /^Referenced by/ {p=1}' |
+ sort -u |
+ xargs -l32 pkginfo -x |
+ awk 'NR % 2 == 1 { name=$1; } NR%2 == 0 { print name, $2 }'
+}
+
+pp_solaris_add_dynlib_depends () {
+ typeset tmp
+ tmp=$pp_wrkdir/tmp.dynlib
+
+ for _cmp in $pp_components; do
+ awk '{print destdir $6}' destdir="$pp_destdir" \
+ < $pp_wrkdir/%files.$_cmp |
+ pp_solaris_dynlib_depend > $tmp
+ if test -s $tmp; then
+ cat $tmp >> $pp_wrkdir/%depend.$_cmp
+ fi
+ rm -f $tmp
+ done
+}
+
+pp_backend_solaris_probe () {
+ echo "${pp_solaris_os}-${pp_solaris_arch_std}"
+}
+
+pp_backend_solaris_vas_platforms () {
+ case `pp_backend_solaris_probe` in
+ sol10-sparc* | sol9-sparc* | sol8-sparc*)
+ echo solaris8-sparc solaris7-sparc solaris26-sparc;;
+ sol7-sparc*) echo solaris7-sparc solaris26-sparc;;
+ sol26-sparc*) echo solaris26-sparc;;
+ sol8-*86) echo solaris8-x86;;
+ sol10-*86 | sol10-x86_64)
+ echo solaris10-x64 solaris8-x86;;
+ *) pp_die "unknown system `pp_backend_solaris_probe`";;
+ esac
+}
+pp_backend_solaris_function() {
+ case $1 in
+ pp_mkgroup) cat<<'.';;
+ /usr/sbin/groupmod "$1" 2>/dev/null && return 0
+ /usr/sbin/groupadd "$1"
+.
+ pp_mkuser:depends) echo pp_mkgroup;;
+ pp_mkuser) cat<<'.';;
+ id "$1" >/dev/null 2>/dev/null && return 0
+ pp_mkgroup "${2:-$1}" || return 1
+ /usr/sbin/useradd \
+ -g "${2:-$1}" \
+ -d "${3:-/nonexistent}" \
+ -s "${4:-/bin/false}" \
+ "$1"
+.
+ *) false;;
+ esac
+}
+
+pp_backend_solaris_init_svc_vars () {
+ pp_solaris_smf_category=
+ pp_solaris_service_shell=/sbin/sh
+}
+
+pp_solaris_init_svc () {
+ smf_category=${pp_solaris_smf_category:-application}
+ smf_version=1
+ smf_type=service
+ solaris_user=
+ solaris_stop_signal=
+ solaris_sysv_init_start=S98 # invocation order for start scripts
+ solaris_sysv_init_kill=K30 # invocation order for kill scripts
+ solaris_sysv_init_start_states="2" # states to install start link
+ solaris_sysv_init_kill_states="S 0 1" # states to install kill link
+
+ #
+ # To have the service be installed to start automatically,
+ # %service foo
+ # solaris_sysv_init_start_states="S 0 1 2"
+ #
+}
+
+pp_solaris_smf () {
+ typeset f
+ f=/var/svc/manifest/$smf_category/$1
+ pp_add_file_if_missing $f ||
+ return 0
+
+ cat <<-. >$pp_destdir$f
+ <?xml version="1.0"?>
+ <!--
+ $copyright
+ Generated by PolyPackage $pp_version
+ -->
+
+ <service name='$smf_category/$1'
+ type='$smf_type'
+ version='$smf_version'>
+
+ <single_instance />
+
+ <exec_method type='method' name='start'
+ exec=''
+ timeout_seconds='60'>
+ <method_context>
+ <method_credential user='${solaris_user:-$user}' />
+ </method_context>
+ </exec>
+
+ <exec_method type='method' name='stop'
+ exec=':kill -${solaris_stop_signal:-$stop_signal}'>
+ <method_context>
+ <method_credential user='${solaris_user:-$user}' />
+ </method_context>
+ </exec>
+
+ </service>
+.
+}
+
+pp_solaris_make_service_group () {
+ typeset group out file svcs svc
+
+ group="$1"
+ svcs="$2"
+ file="/etc/init.d/$group"
+ out="$pp_destdir$file"
+
+ #-- return if the script is supplued already
+ pp_add_file_if_missing "$file" run 755 || return 0
+
+ echo "#! /sbin/sh" > $out
+ echo "# polypkg service group script for these services:" >> $out
+ echo "svcs=\"$svcs\"" >> $out
+
+ cat <<'.' >>$out
+
+ #-- starts services in order.. stops them all if any break
+ pp_start () {
+ undo=
+ for svc in $svcs; do
+ if /etc/init.d/$svc start; then
+ undo="$svc $undo"
+ else
+ if test -n "$undo"; then
+ for svc in $undo; do
+ /etc/init.d/$svc stop
+ done
+ return 1
+ fi
+ fi
+ done
+ return 0
+ }
+
+ #-- stops services in reverse
+ pp_stop () {
+ reverse=
+ for svc in $svcs; do
+ reverse="$svc $reverse"
+ done
+ rc=0
+ for svc in $reverse; do
+ /etc/init.d/$svc stop || rc=$?
+ done
+ return $rc
+ }
+
+ #-- returns true only if all services return true status
+ pp_status () {
+ rc=0
+ for svc in $svcs; do
+ /etc/init.d/$svc status || rc=$?
+ done
+ return $rc
+ }
+
+ case "$1" in
+ start) pp_start;;
+ stop) pp_stop;;
+ status) pp_status;;
+ restart) pp_stop && pp_start;;
+ *) echo "usage: $0 {start|stop|restart|status}" >&2; exit 1;;
+ esac
+.
+}
+
+
+pp_solaris_make_service () {
+ typeset file out _cmd svc
+
+ svc="$1"
+ file="/etc/init.d/$svc"
+ out="$pp_destdir$file"
+
+
+ #-- return if we don't need to create the init script
+ pp_add_file_if_missing "$file" run 755 ||
+ return 0
+
+ echo "#! /sbin/sh" >$out
+ echo "#-- This service init file generated by polypkg" >>$out
+
+ #-- construct a start command that builds a pid file as needed
+ # and forks the daemon
+ _cmd="$cmd";
+ if test -z "$pidfile"; then
+ # The service does not define a pidfile, so we have to make
+ # our own up. On Solaris systems where there is no /var/run
+ # we must use /tmp to guarantee the pid files are removed after
+ # a system crash.
+ cat <<. >>$out
+ pp_piddir="/var/run"
+ test -d "\$pp_piddir/." || pp_piddir="/tmp"
+ pidfile="\$pp_piddir/$svc.pid"
+.
+ _cmd="$cmd & echo \$! > \$pidfile"
+ else
+ # The service is able to write its own PID file
+ cat <<. >>$out
+ pidfile="$pidfile"
+.
+ fi
+
+ if test "${user:-root}" != "root"; then
+ _cmd="su $user -c exec $_cmd";
+ fi
+
+ cat <<. >>$out
+ stop_signal="${stop_signal:-TERM}"
+ svc="${svc}"
+
+ # generated command to run $svc as a daemon process
+ pp_exec () { $_cmd; }
+.
+
+ #-- write the invariant section of the init script
+ cat <<'.' >>$out
+
+ # returns true if $svc is running
+ pp_running () {
+ test -r "$pidfile" &&
+ read pid junk < "$pidfile" &&
+ test ${pid:-0} -gt 1 &&
+ kill -0 "$pid" 2>/dev/null
+ }
+
+ # prints a message describing $svc's running state
+ pp_status () {
+ if pp_running; then
+ echo "service $svc is running (pid $pid)"
+ return 0
+ elif test -f "$pidfile"; then
+ echo "service $svc is not running, but pid file exists"
+ return 2
+ else
+ echo "service $svc is not running"
+ return 1
+ fi
+ }
+
+ # starts $svc
+ pp_start () {
+ if pp_running; then
+ echo "service $svc already running" >&2
+ return 0
+ fi
+ echo "starting $svc... \c"
+ if pp_exec; then
+ echo "done."
+ else
+ echo "ERROR."
+ exit 1
+ fi
+ }
+
+ # stops $svc
+ pp_stop () {
+ if pp_running; then
+ echo "stopping $svc... \c"
+ if kill -$stop_signal $pid; then
+ rm -f "$pidfile"
+ echo "done."
+ else
+ echo "ERROR."
+ return 1
+ fi
+ else
+ echo "service $svc already stopped" >&2
+ return 0
+ fi
+ }
+
+ umask 022
+ case "$1" in
+ start) pp_start;;
+ stop) pp_stop;;
+ status) pp_status;;
+ restart) pp_stop && pp_start;;
+ *) echo "usage: $0 {start|stop|restart|status}" >&2; exit 1;;
+ esac
+.
+}
+
+
+pp_solaris_install_service () {
+ typeset s k l
+ s="${solaris_sysv_init_start}$1"
+ k="${solaris_sysv_init_kill}$1"
+
+ test -n "${solaris_sysv_init_start_states}" &&
+ for state in ${solaris_sysv_init_start_states}; do
+ l="/etc/rc$state.d/$s"
+ echo "echo '$l'"
+ echo "installf -c run \$PKGINST \$PKG_INSTALL_ROOT$l=../init.d/$1 s"
+ pp_solaris_space /etc/rc$state.d 0 1
+ done
+ test -n "${solaris_sysv_init_kill_states}" &&
+ for state in ${solaris_sysv_init_kill_states}; do
+ l="/etc/rc$state.d/$k"
+ echo "echo '$l'"
+ echo "installf -c run \$PKGINST \$PKG_INSTALL_ROOT$l=../init.d/$1 s"
+ pp_solaris_space /etc/rc$state.d 0 1
+ done
+
+}
+
+pp_platforms="$pp_platforms deb"
+
+pp_backend_deb_detect () {
+ test -f /etc/debian_version
+}
+
+pp_deb_cmp_full_name () {
+ typeset prefix
+ prefix="${pp_deb_name:-$name}"
+ case "$1" in
+ run) echo "${prefix}" ;;
+ dbg) echo "${prefix}-${pp_deb_dbg_pkgname}";;
+ dev) echo "${prefix}-${pp_deb_dev_pkgname}";;
+ doc) echo "${prefix}-${pp_deb_doc_pkgname}";;
+ *) pp_error "unknown component '$1'";
+ esac
+}
+
+pp_backend_deb_init () {
+ pp_deb_dpkg_version="2.0"
+ pp_deb_name=
+ pp_deb_version=
+ pp_deb_release=
+ pp_deb_arch=
+ pp_deb_arch_std=
+ pp_deb_maintainer=support@quest.com
+ pp_deb_copyright=
+ pp_deb_distro=
+ pp_deb_control_description=
+ pp_deb_summary=
+ pp_deb_description=
+ pp_deb_dbg_pkgname="dbg"
+ pp_deb_dev_pkgname="dev"
+ pp_deb_doc_pkgname="doc"
+ pp_deb_section=contrib # Free software that depends on non-free software
+
+ # Detect the host architecture
+ pp_deb_detect_arch
+
+ # Make sure any programs we require are installed
+ pp_deb_check_required_programs
+
+ # Set generated/interrogated platforms variables
+ pp_deb_munge_description
+}
+
+pp_deb_check_required_programs () {
+ typeset p needed notfound ok
+ needed= notfound=
+ for prog in dpkg dpkg-deb install md5sum fakeroot
+ do
+ if which $prog 2>/dev/null >/dev/null; then
+ pp_debug "$prog: found"
+ else
+ pp_debug "$prog: not found"
+ case "$prog" in
+ dpkg|dpkg-deb) p=dpkg;;
+ install|md5sum) p=coreutils;;
+ fakeroot) p=fakeroot;;
+ *) pp_die "unexpected dpkg tool $prog";;
+ esac
+ notfound="$notfound $prog"
+ pp_contains "$needed" "$p" || needed="$needed $p"
+ fi
+ done
+ if [ -n "$notfound" ]; then
+ pp_error "cannot find these programs: $notfound"
+ pp_error "please install these packages: $needed"
+ fi
+}
+
+pp_deb_munge_description () {
+ # Insert a leading space on each line, replace blank lines with a
+ #space followed by a full-stop.
+ pp_deb_control_description=`echo ${pp_deb_description:-$description} | \
+ sed "s,^\(.*\)$, \1, " \
+ | sed "s,^[ \t]*$, .,g"`
+
+}
+
+pp_deb_detect_arch () {
+ pp_deb_arch=`dpkg --print-architecture`
+ pp_deb_arch_std=`uname -m`
+}
+
+pp_deb_make_control() {
+ package_name=`pp_deb_cmp_full_name "$1"`
+ cat <<-.
+ Package: ${package_name}
+ Version: ${pp_deb_version:-$version}-${pp_deb_release:-1}
+ Section: ${pp_deb_section:-contrib}
+ Priority: optional
+ Architecture: ${pp_deb_arch}
+ Maintainer: ${pp_deb_maintainer:-$maintainer}
+ Description: ${pp_deb_summary:-$summary}
+ ${pp_deb_control_description}
+.
+ if test -s $pp_wrkdir/%depend."$1"; then
+ sed -ne '/^[ ]*$/!s/^[ ]*/Depends: /p' \
+ < $pp_wrkdir/%depend."$1"
+ fi
+}
+
+pp_deb_make_md5sums() {
+ typeset cmp="$1"; shift
+ typeset pkg_dir
+
+ pkg_dir=$pp_wrkdir/`pp_deb_cmp_full_name $cmp`
+ (cd $pkg_dir && md5sum "$@") > $pkg_dir/DEBIAN/md5sums ||
+ pp_error "cannot make md5sums"
+}
+
+pp_deb_make_package_maintainer_script() {
+ typeset output="$1"
+ typeset source="$2"
+ typeset desc="$3"
+
+ # See if we need to create this script at all
+ if [ -s "$source" ]
+ then
+
+ # Create header
+ cat <<-. >$output || pp_error "Cannot create $output"
+ #!/bin/sh
+ # $desc
+ # Generated by PolyPackage $pp_version
+
+.
+
+ cat $source >> "$output" || pp_error "Cannot append to $output"
+
+ # Set perms
+ chmod 755 "$output" || pp_error "Cannot chmod $output"
+ fi
+}
+
+pp_deb_handle_services() {
+ typeset svc
+
+ #-- add service start/stop code
+ if test -n "$pp_services"; then
+ #-- record the uninstall commands in reverse order
+ for svc in $pp_services; do
+ pp_load_service_vars $svc
+
+ # Create init script (unless one exists)
+ pp_deb_service_make_init_script $svc
+
+ #-- append %post code to install the svc
+ test x"yes" = x"$enable" &&
+ cat<<-. >> $pp_wrkdir/%post.run
+ # Install the service links
+ /usr/sbin/update-rc.d $svc defaults
+.
+
+ #-- prepend %preun code to stop svc
+ cat<<-. | pp_prepend $pp_wrkdir/%preun.run
+ # Stop the $svc service
+ if test -x /usr/sbin/invoke-rc.d; then
+ /usr/sbin/invoke-rc.d $svc stop
+ else
+ /etc/init.d/$svc stop
+ fi
+ # Remove the service links
+ /usr/sbin/update-rc.d -f $svc remove
+.
+ done
+ #pp_deb_service_remove_common | pp_prepend $pp_wrkdir/%preun.run
+ fi
+
+}
+pp_deb_fakeroot () {
+ if test -s $pp_wrkdir/fakeroot.save; then
+ fakeroot -i $pp_wrkdir/fakeroot.save -s $pp_wrkdir/fakeroot.save "$@"
+ else
+ fakeroot -s $pp_wrkdir/fakeroot.save "$@"
+ fi
+}
+
+pp_deb_make_DEBIAN() {
+ typeset cmp="${1:-run}"
+ typeset data cmp_full_name
+ typeset old_umask
+
+ old_umask=`umask`
+ umask 0022
+ cmp_full_name=`pp_deb_cmp_full_name $cmp`
+ data=$pp_wrkdir/$cmp_full_name
+
+ # Create DEBIAN dir $data/DEBIAN
+ mkdir -p $data/DEBIAN
+
+ # Create control file
+ pp_deb_make_control $cmp > $data/DEBIAN/control
+
+ # Copy in conffiles
+ if test -f $pp_wrkdir/%conffiles.$cmp; then
+ cp $pp_wrkdir/%conffiles.$cmp $data/DEBIAN/conffiles
+ fi
+
+ # Create postinst
+ pp_deb_make_package_maintainer_script "$data/DEBIAN/postinst" \
+ "$pp_wrkdir/%post.$cmp" "Post install script for $cmp_full_name"\
+ || exit $?
+
+ # Create prerm
+ pp_deb_make_package_maintainer_script "$data/DEBIAN/prerm" \
+ "$pp_wrkdir/%preun.$cmp" "Pre-uninstall script for $cmp_full_name"\
+ || exit $?
+
+ umask $old_umask
+}
+
+pp_deb_make_data() {
+ typeset _l t m o g f p st data
+ typeset data share_doc owner group
+ cmp=$1
+ data=$pp_wrkdir/`pp_deb_cmp_full_name $cmp`
+ cat $pp_wrkdir/%files.${cmp} | while read t m o g f p st; do
+ test x"$o" = x"-" && o=root
+ test x"$g" = x"-" && g=root
+ case "$t" in
+ f) # Files
+ pp_deb_fakeroot install -D -o $o -g $g -m ${m} $pp_destdir/$p $data/$p;
+ if [ x"$f" = x"v" ]
+ then
+ # File marked as "volatile". Assume this means it's a conffile
+ # TODO: check this as admins like modified conffiles to be left
+ # behind
+ echo "$p" >> $pp_wrkdir/%conffiles.$cmp
+ fi;;
+
+ d) # Directories
+ pp_deb_fakeroot install -m ${m} -o $o -g $g -d $data/$p;;
+
+ s) # Symlinks
+ # Remove leading / from vars
+ rel_p=`echo $p | sed s,^/,,`
+ rel_st=`echo $st | sed s,^/,,`
+ # TODO: we are always doing absolute links here. We should follow
+ # the debian policy of relative links when in the same top-level
+ # directory
+ (cd $data; ln -sf $st $rel_p);;
+ *) pp_error "Unsupported data file type: $t";;
+ esac
+ done
+
+ # If no copyright file is present add one. This is a debian requirement.
+ # XXX - include the LICENSE file instead?
+ share_doc="/usr/share/doc/`pp_deb_cmp_full_name $cmp`"
+ if [ ! -f "$data/$share_doc/copyright" ]
+ then
+ echo "${pp_deb_copyright:-$copyright}" > "$pp_wrkdir/copyright"
+ install -D -m 644 "$pp_wrkdir/copyright" "$data/$share_doc/copyright"
+ fi
+
+}
+
+pp_deb_makedeb () {
+ typeset cmp
+ typeset package_build_dir
+
+ cmp="$1"
+
+ package_build_dir=$pp_wrkdir/`pp_deb_cmp_full_name $cmp`
+
+ # Create package dir
+ mkdir -p $package_build_dir
+
+ # Copy in data
+ pp_deb_make_data $cmp ||
+ pp_die "Could not make DEBIAN data files for $cmp"
+
+ # Make control files
+ # must be done after copying data so conffiles are found
+ pp_deb_make_DEBIAN $cmp ||
+ pp_die "Could not make DEBIAN control files for $cmp"
+
+ # Create md5sums
+ pp_deb_make_md5sums $cmp `(cd $package_build_dir;
+ find . -type f -a -not -name DEBIAN | sed "s,^\./,,")` ||
+ pp_die "Could not make DEBIAN md5sums for $cmp"
+}
+
+pp_backend_deb () {
+ typeset debname
+
+ # Handle services
+ pp_deb_handle_services $cmp
+
+ for cmp in $pp_components
+ do
+ debname=`pp_deb_name $cmp`
+ pp_deb_makedeb $cmp
+ done
+
+ . $pp_wrkdir/%fixup
+
+ for cmp in $pp_components
+ do
+ debname=`pp_deb_name $cmp`
+ # Create debian package
+ pp_debug "Building `pp_deb_cmp_full_name $cmp` -> $output"
+ pp_deb_fakeroot dpkg-deb \
+ --build $pp_wrkdir/`pp_deb_cmp_full_name $cmp` \
+ $pp_wrkdir/$debname ||
+ pp_error "failed to create $cmp package"
+ done
+}
+
+pp_backend_deb_cleanup () {
+ # rm -rf $pp_wrkdir
+ :
+}
+
+pp_deb_name () {
+ typeset cmp="${1:-run}"
+ echo `pp_deb_cmp_full_name $cmp`"_${pp_deb_version:-$version}-${pp_deb_release:-1}_${pp_deb_arch}.deb"
+}
+pp_backend_deb_names () {
+ for cmp in $pp_components
+ do
+ pp_deb_name $cmp
+ done
+}
+
+pp_backend_deb_install_script () {
+ typeset cmp _cmp_full_name
+
+ echo "#!/bin/sh"
+ pp_install_script_common
+
+ cat <<.
+
+ cmp_to_pkgname () {
+ test x"\$*" = x"all" &&
+ set -- $pp_components
+ for cmp
+ do
+ case \$cmp in
+.
+ for cmp in $pp_components; do
+ echo "$cmp) echo '`pp_deb_cmp_full_name $cmp`';;"
+ done
+ cat <<.
+ *) usage;;
+ esac
+ done
+ }
+
+
+ cmp_to_pathname () {
+ test x"\$*" = x"all" &&
+ set -- $pp_components
+ for cmp
+ do
+ case \$cmp in
+.
+ for cmp in $pp_components; do
+ echo "$cmp) echo \${PP_PKGDESTDIR:-.}/'`pp_deb_name $cmp`';;"
+ done
+ cat <<.
+ *) usage;;
+ esac
+ done
+ }
+
+ test \$# -eq 0 && usage
+ op="\$1"; shift
+ case "\$op" in
+ list-components)
+ test \$# -eq 0 || usage \$op
+ echo $pp_components
+ ;;
+ list-services)
+ test \$# -eq 0 || usage \$op
+ echo $pp_services
+ ;;
+ list-files)
+ test \$# -ge 1 || usage \$op
+ cmp_to_pathname "\$@"
+ ;;
+ install)
+ test \$# -ge 1 || usage \$op
+ dpkg --install \`cmp_to_pathname "\$@"\`
+ ;;
+ uninstall)
+ test \$# -ge 1 || usage \$op
+ dpkg --remove \`cmp_to_pkgname "\$@"\`; :
+ ;;
+ start|stop)
+ test \$# -ge 1 || usage \$op
+ ec=0
+ for svc
+ do
+ /etc/init.d/\$svc \$op || ec=1
+ done
+ exit \$ec
+ ;;
+ print-platform)
+ test \$# -eq 0 || usage \$op
+ echo "linux-${pp_deb_arch}"
+ ;;
+ *)
+ usage
+ ;;
+ esac
+.
+}
+
+pp_backend_deb_probe() {
+ typeset arch distro release
+
+ pp_deb_detect_arch
+
+ # /etc/debian_version exists on Debian & Ubuntu, so it's no use
+ # to us. Use lsb_release instead.
+
+ case `(lsb_release -is || echo no-lsb) 2>/dev/null` in
+ Debian)
+ distro=deb
+ ;;
+ Ubuntu)
+ distro=ubu
+ ;;
+ no-lsb)
+ echo unknown-$pp_deb_arch_std
+ return 0
+ ;;
+ *)
+ distro=unknown
+ ;;
+ esac
+
+ release=`lsb_release -rs`
+
+ # If release is not numeric, use the codename
+ case $release in
+ *[!.0-9r]*)
+ release=`lsb_release -cs`
+ ;;
+ *)
+ # Remove trailing revision number and any dots
+ release=`echo $release | cut -dr -f1 | tr -d .`
+ ;;
+ esac
+
+ echo $distro$release-$pp_deb_arch_std
+}
+
+pp_backend_deb_vas_platforms () {
+ case "$pp_deb_arch_std" in
+ x86_64) echo "linux-x86_64.deb";; # DO NOT add linux-x86.deb here!!
+ *86) echo "linux-x86.deb";;
+ *) pp_die "unknown architecture ${pp_deb_arch_std}";;
+ esac
+}
+pp_backend_deb_init_svc_vars () {
+ pp_deb_default_start_runlevels= # should be "3 4 5"??
+ pp_deb_default_svc_description="No description"
+}
+
+pp_backend_deb_init_svc_vars () {
+
+ reload_signal=
+ start_runlevels=${pp_deb_default_start_runlevels} # == lsb default-start
+ stop_runlevels="0 1 2 6" # == lsb default-stop
+ svc_description="${pp_deb_default_svc_description}" # == lsb short descr
+ svc_process=
+
+ lsb_required_start='$local_fs $network'
+ lsb_should_start=
+ lsb_required_stop=
+ lsb_description=
+
+ start_priority=50
+ stop_priority=50 #-- stop_priority = 100 - start_priority
+}
+
+pp_deb_service_make_init_script () {
+ typeset svc=$1
+ typeset script=/etc/init.d/$svc
+ typeset out=$pp_destdir$script
+ typeset _process _cmd
+
+ pp_add_file_if_missing $script run 755 || return 0
+
+ #-- start out as an empty shell script
+ cat <<-'.' >$out
+ #!/bin/sh
+.
+
+ #-- determine the process name from $cmd unless $svc_process is given
+ set -- $cmd
+ #_process=${svc_process:-"$1"} --? WTF
+
+ #-- construct a start command that builds a pid file if needed
+ _cmd="$cmd";
+ _cmd_path=`echo $cmd | cut -d" " -f1`
+ _cmd_name=`basename $_cmd_path`
+ _cmd_args=`echo $cmd | cut -d" " -f2-`
+ test x"$_cmd_path" != x"$_cmd_args" || _cmd_args=
+
+ #-- generate the LSB init info
+ cat <<-. >>$out
+ ### BEGIN INIT INFO
+ # Provides: ${svc}
+ # Required-Start: ${lsb_required_start}
+ # Should-Start: ${lsb_should_start}
+ # Required-Stop: ${lsb_required_stop}
+ # Default-Start: ${start_runlevels}
+ # Default-Stop: ${stop_runlevels}
+ # Short-Description: ${svc_description}
+ ### END INIT INFO
+ # Generated by PolyPackage ${pp_version}
+ # ${copyright}
+
+.
+
+ if test x"${svc_description}" = x"${pp_deb_default_svc_description}"; then
+ svc_description=
+ fi
+
+ #-- write service-specific definitions
+ cat <<. >>$out
+NAME="${_cmd_name}"
+DESC="${svc_description:-$svc service}"
+USER="${user}"
+GROUP="${group}"
+PIDFILE="${pidfile}"
+STOP_SIGNAL="${stop_signal}"
+RELOAD_SIGNAL="${reload_signal}"
+CMD="${_cmd}"
+DAEMON="${_cmd_path}"
+DAEMON_ARGS="${_cmd_args}"
+SCRIPTNAME=${script}
+.
+
+ #-- write the generic part of the init script
+ cat <<'.' >>$out
+
+[ -x "$DAEMON" ] || exit 0
+
+[ -r /etc/default/$NAME ] && . /etc/default/$NAME
+
+[ -f /etc/default/rcS ] && . /etc/default/rcS
+
+. /lib/lsb/init-functions
+
+do_start()
+{
+ # Return
+ # 0 if daemon has been started
+ # 1 if daemon was already running
+ # 2 if daemon could not be started
+ if [ -n "$PIDFILE" ]
+ then
+ pidfile_opt="--pidfile $PIDFILE"
+ else
+ pidfile_opt="--make-pidfile --background --pidfile /var/run/$NAME.pid"
+ fi
+ if [ -n "$USER" ]
+ then
+ user_opt="--user $USER"
+ fi
+ if [ -n "$GROUP" ]
+ then
+ group_opt="--group $GROUP"
+ fi
+ if [ "$VERBOSE" = no ]
+ then
+ quiet_opt="--quiet"
+ else
+ quiet_opt="--verbose"
+ fi
+
+ start-stop-daemon --start $quiet_opt $pidfile_opt $user_opt --exec $DAEMON --test > /dev/null \
+ || return 1
+
+ # Note: there seems to be no way to tell whether the daemon will fork itself or not, so pass
+ # --background for now
+ start-stop-daemon --start $quiet_opt $pidfile_opt $user_opt --exec $DAEMON -- \
+ $DAEMON_ARGS \
+ || return 2
+}
+
+do_stop()
+{
+ # Return
+ # 0 if daemon has been stopped
+ # 1 if daemon was already stopped
+ # 2 if daemon could not be stopped
+ # other if a failure occurred
+ if [ -n "$PIDFILE" ]
+ then
+ pidfile_opt="--pidfile $PIDFILE"
+ else
+ pidfile_opt="--pidfile /var/run/$NAME.pid"
+ fi
+ if [ -n "$USER" ]
+ then
+ user_opt="--user $USER"
+ fi
+ if [ -n $STOP_SIGNAL ]
+ then
+ signal_opt="--signal $STOP_SIGNAL"
+ fi
+ if [ "$VERBOSE" = "no" ]
+ then
+ quiet_opt="--quiet"
+ else
+ quiet_opt="--verbose"
+ fi
+ start-stop-daemon --stop $quiet_opt $signal_opt --retry=TERM/30/KILL/5 $pidfile_opt --name $NAME
+ RETVAL="$?"
+ [ "$RETVAL" = 2 ] && return 2
+ # Wait for children to finish too if this is a daemon that forks
+ # and if the daemon is only ever run from this initscript.
+ # If the above conditions are not satisfied then add some other code
+ # that waits for the process to drop all resources that could be
+ # needed by services started subsequently. A last resort is to
+ # sleep for some time.
+ start-stop-daemon --stop $quiet_opt --oknodo --retry=0/30/KILL/5 --exec $DAEMON
+ [ "$?" = 2 ] && return 2
+ # Many daemons don't delete their pidfiles when they exit.
+ test -z $PIDFILE || rm -f $PIDFILE
+ return "$RETVAL"
+}
+
+do_reload() {
+ #
+ # If the daemon can reload its configuration without
+ # restarting (for example, when it is sent a SIGHUP),
+ # then implement that here.
+ #
+ if [ -n "$PIDFILE" ]
+ then
+ pidfile_opt="--pidfile $PIDFILE"
+ else
+ pidfile_opt="--pidfile /var/run/$NAME.pid"
+ fi
+ if [ -n "$RELOAD_SIGNAL" ]
+ then
+ start-stop-daemon --stop --signal $RELOAD_SIGNAL $quiet_opt $pidfile_opt --name $NAME
+ fi
+ return 0
+}
+
+case "$1" in
+ start)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
+ do_start
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ stop)
+ [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
+ 2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
+ esac
+ ;;
+ reload|force-reload)
+ if [ -n "$RELOAD_SIGNAL" ]
+ then
+ log_daemon_msg "Reloading $DESC" "$NAME"
+ do_reload
+ log_end_msg $?
+ else
+ # Do a restart instead
+ "$0" restart
+ fi
+ ;;
+ restart)
+ #
+ # If the "reload" option is implemented then remove the
+ # 'force-reload' alias
+ #
+ log_daemon_msg "Restarting $DESC" "$NAME"
+ do_stop
+ case "$?" in
+ 0|1)
+ do_start
+ case "$?" in
+ 0) log_end_msg 0 ;;
+ 1) log_end_msg 1 ;; # Old process is still running
+ *) log_end_msg 1 ;; # Failed to start
+ esac
+ ;;
+ *)
+ # Failed to stop
+ log_end_msg 1
+ ;;
+ esac
+ ;;
+ *)
+ #echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
+ echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
+ exit 3
+ ;;
+esac
+
+:
+.
+ chmod 755 $out
+}
+pp_backend_deb_function() {
+ case $1 in
+ pp_mkgroup) cat<<'.';;
+ /usr/sbin/groupmod "$1" 2>/dev/null && return 0
+ /usr/sbin/groupadd "$1"
+.
+ pp_mkuser:depends) echo pp_mkgroup;;
+ pp_mkuser) cat<<'.';;
+ pp_tmp_system=
+ id -u "$1" >/dev/null 2>/dev/null && return 0
+ # deb 3.1's useradd changed API in 4.0. Gah!
+ /usr/sbin/useradd --help 2>&1 | /bin/grep -q .--system &&
+ pp_tmp_system=--system
+ pp_mkgroup "${2:-$1}" || return 1
+ /usr/sbin/useradd \
+ -g "${2:-$1}" \
+ -d "${3:-/nonexistent}" \
+ -s "${4:-/bin/false}" \
+ $pp_tmp_system \
+ "$1"
+.
+ pp_havelib) cat<<'.';;
+ for pp_tmp_dir in `echo "/usr/lib:/lib${3:+:$3}" | tr : ' '`; do
+ test -r "$pp_tmp_dir/lib$1.so{$2:+.$2}" && return 0
+ done
+ return 1
+.
+ *) false;;
+ esac
+}
+
+pp_platforms="$pp_platforms kit"
+
+pp_backend_kit_detect () {
+ test x"$1" = x"OSF1"
+}
+
+pp_backend_kit_init () {
+ pp_kit_name=
+ pp_kit_package=
+ pp_kit_desc=
+ pp_kit_version=
+ pp_kit_subset=
+ pp_readlink_fn=pp_ls_readlink
+ pp_kit_startlevels="2 3"
+ pp_kit_stoplevels="0 2 3"
+}
+
+pp_backend_kit () {
+ typeset mi_file k_file svc outfile
+ typeset desc
+
+ pp_backend_kit_names > /dev/null
+
+ if test -z "$pp_kit_desc"; then
+ pp_kit_desc="$description"
+ fi
+
+ mi_file="$pp_wrkdir/$pp_kit_subset.mi"
+ k_file="$pp_wrkdir/$pp_kit_subset.k"
+ scp_file="$pp_wrkdir/$pp_kit_subset.scp"
+
+ desc="${pp_kit_desc:-$description}"
+
+ cat <<-. >> $k_file
+ NAME='$name'
+ CODE=$pp_kit_name
+ VERS=$pp_kit_version
+ MI=$mi_file
+ COMPRESS=0
+ %%
+ $pp_kit_subset . 0 '$desc'
+.
+
+ if test -n "$pp_services"; then
+ for svc in $pp_services; do
+ pp_kit_make_service $svc
+ pp_prepend $pp_wrkdir/%preun.run <<-.
+ /sbin/init.d/$svc stop
+.
+ done
+ fi
+
+ pp_backend_kit_make_mi "$mi_file"
+ pp_backend_kit_make_scp
+ #rm -rf $pp_wrkdir/kit_dest
+ mkdir -p $pp_wrkdir/kit_dest
+ pp_backend_kit_kits $k_file $pp_opt_destdir $pp_wrkdir/kit_dest
+ tar cvf $pp_wrkdir/$pp_kit_subset.tar -C $pp_wrkdir/kit_dest .
+ gzip -c $pp_wrkdir/$pp_kit_subset.tar > $pp_wrkdir/$pp_kit_subset.tar.gz
+ #rm -rf $pp_wrkdir/$pp_kit_subset.tar $pp_wrkdir/scps
+}
+
+pp_backend_kit_make_mi () {
+ # XXX this information should go into the .inv files
+ typeset t m o g f p st line dm
+ while read t m o g f p st; do
+ case $t in
+ f|d)
+ echo "0 .$p $pp_kit_subset"
+ echo " chmod $m $p" >> $pp_wrkdir/%post.run
+ if [ x"$o" = x"-" ] ; then
+ echo " chown root $p" >> $pp_wrkdir/%post.run
+ else
+ echo " chown $o $p" >> $pp_wrkdir/%post.run
+ fi
+ if [ x"$g" = x"-" ] ; then
+ echo " chgrp 0 $p" >> $pp_wrkdir/%post.run
+ else
+ echo " chgrp $g $p" >> $pp_wrkdir/%post.run
+ fi
+ ;;
+ s)
+ echo " ln -s $st $p" >> $pp_wrkdir/%post.run
+ echo " rm -f $p" >> $pp_wrkdir/%preun.run
+ ;;
+ esac
+ done < $pp_wrkdir/%files.run | sort -k3 |uniq > $1
+}
+
+
+pp_backend_kit_make_scp () {
+ scpdir="$pp_wrkdir/scps"
+ mkdir "$scpdir" && touch "$scpdir"/$pp_kit_subset.scp
+ cat <<EOF >"$scpdir"/$pp_kit_subset.scp
+
+ . /usr/share/lib/shell/libscp
+
+ case "\$ACT" in
+ PRE_L)
+ STL_ScpInit
+
+
+
+ ;;
+ POST_L)
+ STL_ScpInit
+ STL_LinkCreate
+EOF
+
+ cat $pp_wrkdir/%post.run >>"$scpdir"/$pp_kit_subset.scp
+ cat >>"$scpdir"/$pp_kit_subset.scp <<EOF
+ ;;
+ PRE_D)
+ STL_ScpInit
+ STL_LinkRemove
+EOF
+ cat $pp_wrkdir/%preun.run >>"$scpdir"/$pp_kit_subset.scp
+ cat >>"$scpdir"/$pp_kit_subset.scp <<EOF
+ ;;
+ POST_D)
+
+ ;;
+ C)
+ STL_ScpInit
+
+ case "\$1" in
+ INSTALL)
+ echo "Installation of the \$_DESC (\$_SUB) subset is complete."
+ ;;
+ DELETE)
+ ;;
+ esac
+
+ ;;
+ V)
+
+ ;;
+ esac
+
+ exit 0
+EOF
+ chmod 744 "$scpdir"/$pp_kit_subset.scp
+}
+
+
+pp_backend_kit_cleanup () {
+ :
+}
+
+pp_backend_kit_names () {
+ if test -z "$pp_kit_name"; then
+ pp_warn "pp_kit_name not specified, using XXX"
+ pp_kit_name=XXX
+ fi
+ case "$pp_kit_name" in
+ ???) : ok;;
+ *) pp_error "\$pp_kit_name $pp_kit_name must be three characters";;
+ esac
+ if test -z "$pp_kit_package"; then
+ pp_warn "pp_kit_package not specified, using YYYY"
+ pp_kit_package=YYYY
+ fi
+ if test -z "$pp_kit_version"; then
+ pp_kit_version=`echo $version|sed -e 's/^\([0-9]\)\.\([0-9]\).*/\1\20/'`
+ fi
+ case "$pp_kit_version" in
+ [0-9][0-9][0-9]) : ok;;
+ *) pp_error "\$pp_kit_version $pp_kit_version must be three digits, ";;
+ esac
+ if test -z "$pp_kit_subset"; then
+ pp_kit_subset="$pp_kit_name$pp_kit_package$pp_kit_version"
+ fi
+ echo "$pp_kit_subset.tar.gz"
+}
+
+pp_backend_kit_install_script () {
+ typeset pkgname platform
+
+ pkgname=`pp_backend_kit_names`
+ platform="`pp_backend_kit_probe`"
+
+ echo "#!/bin/sh"
+ pp_install_script_common
+ cat <<.
+
+ cpt_to_tags () {
+ test x"\$*" = x"all" && set -- $pp_components
+ for cpt
+ do
+ echo "$name.\$cpt"
+ done
+ }
+
+ test \$# -eq 0 && usage
+ op="\$1"; shift
+
+ case "\$op" in
+ list-components)
+ test \$# -eq 0 || usage \$op
+ echo "$pp_components"
+ ;;
+ list-services)
+ test \$# -eq 0 || usage \$op
+ echo "$pp_services"
+ ;;
+ list-files)
+ test \$# -ge 1 || usage \$op
+ echo \${PP_PKGDESTDIR:-.}/$pkgname
+ ;;
+ install)
+ test \$# -ge 1 || usage \$op
+ verbose echo \${PP_PKGDESTDIR:-\`pwd\`}/$pkgname \`cpt_to_tags "\$@"\`
+ #verbose swinstall -x verbose=0 -s \${PP_PKGDESTDIR:-\`pwd\`}/$pkgname \`cpt_to_tags "\$@"\`
+ ;;
+ uninstall)
+ test \$# -ge 1 || usage \$op
+ verbose echo \`cpt_to_tags "\$@"\`
+ #verbose swremove -x verbose=0 \`cpt_to_tags "\$@"\`
+ ;;
+ start|stop)
+ test \$# -ge 1 || usage \$op
+ ec=0
+ for svc
+ do
+ verbose /sbin/init.d/\$svc \$op
+ [ \$? -eq 4 -o \$? -eq 0 ] || ec=1
+ done
+ exit \$ec
+ ;;
+ print-platform)
+ echo "$platform"
+ ;;
+ *)
+ usage
+ ;;
+ esac
+.
+}
+
+pp_backend_kit_function () {
+ case "$1" in
+ pp_mkgroup) cat <<'.';;
+ grep "^$1:" /etc/group >/dev/null ||
+ /usr/sbin/groupadd $1
+.
+ pp_mkuser) cat <<'.';;
+ eval user=\$$#
+ grep "^$user:" /etc/passwd >/dev/null ||
+ /usr/sbin/useradd -s /usr/bin/false "$@"
+.
+ pp_havelib) cat <<'.';;
+ for dir in `echo /usr/lib${3+:$3} | tr : ' '`; do
+ test -r "$dir/lib$1.${2-sl}" && return 0
+ done
+ return 1
+.
+ *) pp_error "unknown function request: $1";;
+ esac
+}
+
+pp_backend_kit_init_svc_vars () {
+ :
+}
+
+pp_backend_kit_probe () {
+ echo tru64-`uname -r | sed 's/V\([0-9]*\)\.\([0-9]*\)/\1\2/'`
+}
+
+pp_kit_service_group_script () {
+ typeset grp svcs scriptpath out
+ grp="$1"
+ svcs="$2"
+ scriptpath="/sbin/init.d/$grp"
+ out="$pp_destdir$scriptpath"
+
+ pp_add_file_if_missing $scriptpath run 755 || return 0
+
+ cat <<-. > $out
+ #!/sbin/sh
+ # generated by pp $pp_version
+ svcs="$svcs"
+.
+
+cat <<-'.' >> $out
+ #-- starts services in order.. stops them all if any break
+ pp_start () {
+ undo=
+ for svc in $svcs; do
+ /sbin/init.d/$svc start
+ case $? in
+ 0|4)
+ undo="$svc $undo"
+ ;;
+ *)
+ if test -n "$undo"; then
+ for svc in $undo; do
+ /sbin/init.d/$svc stop
+ done
+ return 1
+ fi
+ ;;
+ esac
+ done
+ return 0
+ }
+
+ #-- stops services in reverse
+ pp_stop () {
+ reverse=
+ for svc in $svcs; do
+ reverse="$svc $reverse"
+ done
+ rc=0
+ for svc in $reverse; do
+ /sbin/init.d/$svc stop || rc=$?
+ done
+ return $rc
+ }
+
+ case $1 in
+ start_msg) echo "Starting $svcs";;
+ stop_msg) echo "Stopping $svcs";;
+ start) pp_start;;
+ stop) pp_stop;;
+ *) echo "usage: $0 {start|stop|start_msg|stop_msg}"
+ exit 1;;
+ esac
+.
+}
+
+pp_kit_service_script () {
+ typeset svc scriptpath out
+
+ svc="$1"
+ scriptpath="/sbin/init.d/$svc"
+
+ pp_load_service_vars "$svc"
+
+ test -n "$user" -a x"$user" != x"root" &&
+ cmd="SHELL=/usr/bin/sh /usr/bin/su $user -c \"exec `echo $cmd | sed -e 's,[$\\\`],\\&,g'`\""
+ if test -z "$pidfile"; then
+ pidfile="/var/run/$svc.pid"
+ cmd="$cmd & echo \$! > \$pidfile"
+ fi
+
+ pp_add_file_if_missing $scriptpath run 755
+
+ cat <<-. > $pp_destdir$scriptpath
+ svc="$svc"
+ pidfile="$pidfile"
+
+ pp_start () {
+ $cmd
+ }
+.
+ cat <<-'.' >>$pp_destdir$scriptpath
+ pp_stop () {
+ if test ! -s "$pidfile"; then
+ echo "Unable to stop $svc (no pid file)"
+ return 1
+ else
+ read pid < "$pidfile"
+ if kill -0 "$pid" 2>/dev/null; then
+ if kill -${stop_signal:-TERM} "$pid"; then
+ rm -f "$pidfile"
+ return 0
+ else
+ echo "Unable to stop $svc"
+ return 1
+ fi
+ else
+ rm -f "$pidfile"
+ return 0
+ fi
+ fi
+ }
+
+ pp_running () {
+ if test ! -s "$pidfile"; then
+ return 1
+ else
+ read pid < "$pidfile"
+ kill -0 "$pid" 2>/dev/null
+ fi
+ }
+ case $1 in
+ start_msg) echo "Starting the $svc service";;
+ stop_msg) echo "Stopping the $svc service";;
+ start)
+ if pp_running; then
+ echo "$svc already running";
+ exit 0
+ elif pp_start; then
+ echo "$svc started";
+ # rc(1M) says we should exit 4, but nobody expects it!
+ exit 0
+ else
+ exit 1
+ fi
+ ;;
+ stop)
+ if pp_stop; then
+ echo "$svc stopped";
+ exit 0
+ else
+ exit 1
+ fi
+ ;;
+ *) echo "usage: $0 {start|stop|start_msg|stop_msg}"
+ exit 1
+ ;;
+ esac
+.
+}
+
+pp_kit_make_service () {
+ typeset level priority startlevels stoplevels
+ typeset svc svcvar
+
+ svc="$1"
+ svcvar=`pp_makevar $svc`
+
+ #-- don't do anything if the script exists
+ if test -s "$pp_destdir/sbin/init.d/$svc"; then
+ pp_error "$pp_destdir/sbin/init.d/$svc exists"
+ return
+ fi
+
+ # symlink the script, depending on the priorities chosen
+ eval priority='${pp_kit_priority_'$svcvar'}'
+ test -z "$priority" && priority="${pp_kit_priority:-50}"
+
+ eval startlevels='${pp_kit_startlevels_'$svcvar'}'
+ test -z "$startlevels" && startlevels="$pp_kit_startlevels"
+
+ eval stoplevels='${pp_kit_stoplevels_'$svcvar'}'
+ test -z "$stoplevels" && stoplevels="$pp_kit_stoplevels"
+
+ # create the script and config file
+ pp_kit_service_script $svc
+
+ # fix the priority up
+ case "$priority" in
+ ???) :;;
+ ??) priority=0$priority;;
+ ?) priority=00$priority;;
+ esac
+
+ if test x"$stoplevels" = x"auto"; then
+ stoplevels=
+ test -z "$startlevels" || for level in $startlevels; do
+ stoplevels="$stoplevels `expr $level - 1`"
+ done
+ fi
+
+ # create the symlinks
+ test -z "$startlevels" || for level in $startlevels; do
+ echo " ln -s /sbin/init.d/$svc /sbin/rc$level.d/S$priority$svc" >>$pp_wrkdir/%post.run
+ echo " rm /sbin/rc$level.d/S$priority$svc" >>$pp_wrkdir/%preun.run
+ done
+ test -z "$stoplevels" || for level in $stoplevels; do
+ echo " ln -s /sbin/init.d/$svc /sbin/rc$level.d/K$priority$svc" >>$pp_wrkdir/%post.run
+ echo " rm -f /sbin/rc$level.d/K$priority$svc" >>$pp_wrkdir/%preun.run
+ done
+}
+
+
+
+
+pp_backend_kit_sizes () {
+ awk '
+ BEGIN { root = usr = var = 0; }
+ {
+ if (substr($9, 1, 1) != "l")
+ if (substr($10, 1, 6) == "./var/")
+ var += $2;
+ else if (substr($10, 1, 10) == "./usr/var/")
+ var += $2
+ else if (substr($10, 1, 6) == "./usr/")
+ usr += $2
+ else
+ root += $2
+ }
+ END { printf "%d\t%d\t%d", root, usr, var }
+ ' "$@"
+}
+
+pp_kit_kits_global () {
+ line=`sed -n '/^%%/q;/^'$2'=/{s/^'$2'=//p;q;}' <"$1"`
+ test -z "$line" && return 1
+ eval "echo $line"
+ :
+}
+
+pp_backend_kit_kits () {
+ typeset KITFILE FROMDIR TODIR
+ typeset SCPDIR
+
+ SCPDIR="$pp_wrkdir/scps"
+
+ PATH="/usr/lbin:/usr/bin:/etc:/usr/ucb:$PATH"; export PATH # XXX
+ #umask 2 # XXX
+
+ test $# -ge 3 || pp_die "pp_backend_kit_kits: too few arguments"
+ KITFILE="$1"; shift
+ FROMDIR="$1"; shift
+ TODIR="$1"; shift
+
+ test -f "$KITFILE" || pp_die "$KITFILE not found"
+ test -d "$FROMDIR" || pp_die "$FROMDIR not found"
+ test -d "$TODIR" || pp_die "$TODIR not found"
+
+ INSTCTRL="$TODIR/instctrl"
+ mkdir -p "$INSTCTRL" || pp_die "cannot create instctrl directory"
+ chmod 775 "$INSTCTRL"
+
+ grep "%%" $KITFILE > /dev/null || pp_die "no %% in $KITFILE"
+
+ typeset NAME CODE VERS MI ROOT COMPRESS
+ typeset S_LIST ALLSUBS
+
+ NAME=`pp_kit_kits_global "$KITFILE" NAME` || pp_die "no NAME in $KITFILE"
+ CODE=`pp_kit_kits_global "$KITFILE" CODE` || pp_die "no CODE in $KITFILE"
+ VERS=`pp_kit_kits_global "$KITFILE" VERS` || pp_die "no VERS in $KITFILE"
+ MI=`pp_kit_kits_global "$KITFILE" MI` || pp_die "no MI in $KITFILE"
+ ROOT=`pp_kit_kits_global "$KITFILE" ROOT`
+ COMPRESS=`pp_kit_kits_global "$KITFILE" COMPRESS`
+
+ test -f "$MI" || pp_die "Inventory file $MI not found"
+
+ case "$ROOT" in
+ *ROOT)
+ test -f "$TODIR/$ROOT" ||
+ pp_die "Root image $ROOT not found in $TODIR" ;;
+ esac
+
+ ALLSUBS=`awk 'insub==1 {print $1} /^%%/ {insub=1}' <"$KITFILE"`
+ test $# -eq 0 && set -- $ALLSUBS
+
+ pp_debug "Creating $# $NAME subsets."
+ pp_debug "ALLSUBS=<$ALLSUBS>"
+
+ if test x"$COMPRESS" = x"1"; then
+ COMPRESS=:
+ else
+ COMPRESS=false
+ fi
+
+ #rm -f *.ctrl Volume*
+
+ for SUB
+ do
+ test -z "$SUB" && pp_die "SUB is empty"
+
+ typeset INV CTRL ROOTSIZE USRSIZE VARSIZE TSSUB
+ #rm -f Volume*
+ case $SUB in
+ .*) :;;
+ *) pp_verbose rm -f "$TODIR/$SUB"* "$INSTCTRL/$SUB"*;;
+ esac
+
+ TSSUB="$pp_wrkdir/ts.$SUB"
+
+ pp_debug "kits: Subset $SUB"
+
+ INV="$SUB.inv"
+ CTRL="$SUB.ctrl"
+ pp_debug "kits: Generating media creation information..."
+
+ # Invcutter takes as input
+ # SUB dir/path
+ # and generates stl_inv(4) files, like this
+ # f 0 00000 0 0 100644 2/11/09 010 f dir/path none SUB
+ grep " $SUB\$" "$MI" |
+ pp_verbose /usr/lbin/invcutter \
+ -v "$VERS" -f "$FROMDIR" > "$INSTCTRL/$INV" ||
+ pp_die "failed to create $INSTCTRL/$INV"
+ chmod 664 "$INSTCTRL/$INV"
+
+ pp_backend_kit_sizes "$INSTCTRL/$INV" > "$pp_wrkdir/kit.sizes"
+ read ROOTSIZE USRSIZE VARSIZE < "$pp_wrkdir/kit.sizes"
+
+ # Prefix each line with $FROMDIR. This will be stripped
+ awk '$1 != "d" {print from $10}' from="$FROMDIR/" \
+ > "$TSSUB" < "$INSTCTRL/$INV" ||
+ pp_die "failed"
+
+ NVOLS=0
+
+ pp_debug "kits: Creating $SUB control file..."
+
+ sed '1,/^%%/d;/^'"$SUB"'/{p;q;}' < "$KITFILE" > "$pp_wrkdir/kit.line"
+ read _SUB _IGNOR DEPS FLAGS DESC < "$pp_wrkdir/kit.line"
+ if test -z "$_SUB"; then
+ pp_warn "No such subset $SUB in $KITFILE"
+ continue
+ fi
+ DEPS=`echo $DEPS | tr '|' ' '`
+ case $FLAGS in
+ FLGEXP*) pp_verbose FLAGS='"${'"$FLAGS"'}"' ;;
+ esac
+ case $DESC in
+ *%*) DESC=`echo $DESC|awk -F% '{printf "%-36s%%%s\n", $1, $2}'`;;
+ esac
+
+ cat > "$INSTCTRL/$CTRL" <<-.
+ NAME='$NAME $SUB'
+ DESC=$DESC
+ ROOTSIZE=$ROOTSIZE
+ USRSIZE=$USRSIZE
+ VARSIZE=$VARSIZE
+ NVOLS=1:$NVOLS
+ MTLOC=1:$TLOC
+ DEPS="$DEPS"
+ FLAGS=$FLAGS
+.
+ chmod 664 "$INSTCTRL/$CTRL"
+
+ pp_debug "kits: Making tar image"
+
+ pp_verbose tar cfPR "$TODIR/$SUB" "$FROMDIR/" "$TSSUB" ||
+ pp_error "problem creating kit file"
+
+ if $COMPRESS; then
+ pp_debug "kits: Compressing"
+ (cd "$TODIR" && compress -f -v "$SUB") ||
+ pp_die "problem compressing $TODIR/$SUB"
+ SPC=`expr $SUB : '\(...\).*'` # first three characters
+ SVC=`expr $SUB : '.*\(...\)'` # last three characters
+ : > "$INSTCTRL/$SPC$SVC.comp"
+ chmod 664 "$INSTCTRL/$SPC$SVC.comp"
+ pp_debug "kits: Padding compressed file to 10kB" # wtf?
+ rm -f "$TODIR/$SUB"
+ pp_verbose \
+ dd if="$TODIR/$SUB.Z" of="$TODIR/$SUB" bs=10k conv=sync ||
+ pp_die "problem moving compressed file"
+ rm -f "$TODIR/$SUB.Z"
+ fi
+ chmod 664 "$TODIR/$SUB"
+
+ if test -f "$SCPDIR/$SUB.scp"; then
+ cp "$SCPDIR/$SUB.scp" "$INSTCTRL/$SUB.scp"
+ chmod 755 "$INSTCTRL/$SUB.scp"
+ else
+ pp_debug "kits: null subset control program for $SUB"
+ : > "$INSTCTRL/$SUB.scp"
+ chmod 744 "$INSTCTRL/$SUB.scp"
+ fi
+
+ pp_debug "kits: Finished creating media image for $SUB"
+ done
+
+ pp_debug "kits: Creating $CODE.image"
+
+ case "$ROOT" in
+ *ROOT) ALLSUBS="$ROOT $ALLSUBS"
+ ;;
+ esac
+
+ (cd "$TODIR" && sum $ALLSUBS) > "$INSTCTRL/$CODE.image"
+ chmod 664 "$INSTTRL/$CODE.image"
+ pp_debug "kits: Creating INSTCTRL"
+ (cd "$INSTCTRL" && tar cpvf - *) > "$TODIR/INSTCTRL"
+ chmod 664 "$TODIR/INSTCTRL"
+ cp "$INSTCTRL/$CODE.image" "$TODIR/$CODE.image"
+ chmod 664 "$TODIR/$CODE.image"
+
+ pp_debug "kits: Media image production complete"
+}
+
+pp_platforms="$pp_platforms rpm"
+
+pp_backend_rpm_detect () {
+ test x"$1" = x"Linux" -a ! -f /etc/debian_version
+}
+
+pp_backend_rpm_init () {
+
+ pp_rpm_version=
+ pp_rpm_summary=
+ pp_rpm_description=
+ pp_rpm_group="Applications/Internet"
+ pp_rpm_license="Unspecified"
+ pp_rpm_vendor=
+ pp_rpm_url=
+ pp_rpm_packager=
+ pp_rpm_provides=
+ pp_rpm_requires=
+ pp_rpm_release=
+ pp_rpm_epoch=
+ pp_rpm_dev_group="Development/Libraries"
+ pp_rpm_dbg_group="Development/Tools"
+ pp_rpm_doc_group="Documentation"
+ pp_rpm_dev_description=
+ pp_rpm_dbg_description=
+ pp_rpm_doc_description=
+ pp_rpm_dev_requires=
+ pp_rpm_dbg_requires=
+ pp_rpm_doc_requires=
+ pp_rpm_dev_provides=
+ pp_rpm_dbg_provides=
+ pp_rpm_doc_provides=
+
+ pp_rpm_dbg_pkgname=debug
+ pp_rpm_dev_pkgname=devel
+ pp_rpm_doc_pkgname=doc
+
+ pp_rpm_defattr_uid=root
+ pp_rpm_defattr_gid=root
+
+ pp_rpm_detect_arch
+ pp_rpm_detect_distro
+ pp_rpm_rpmbuild=`pp_rpm_detect_rpmbuild`
+
+ # SLES8 doesn't always come with readlink
+ test -x /usr/bin/readlink -o -x /bin/readlink ||
+ pp_readlink_fn=pp_ls_readlink
+}
+
+pp_rpm_detect_arch () {
+ pp_rpm_arch=auto
+
+ #-- Find the default native architecture that RPM is configured to use
+ cat <<-. >$pp_wrkdir/dummy.spec
+ Name: dummy
+ Version: 1
+ Release: 1
+ Summary: dummy
+ Group: ${pp_rpm_group}
+ License: ${pp_rpm_license}
+ %description
+ dummy
+.
+ $pp_opt_debug && cat $pp_wrkdir/dummy.spec
+ pp_rpm_arch_local=`rpm -q --qf '%{arch}\n' --specfile $pp_wrkdir/dummy.spec`
+ rm $pp_wrkdir/dummy.spec
+
+ #-- Ask the kernel what machine architecture is in use
+ case "`uname -m`" in
+ i?86) pp_rpm_arch_std=i386;;
+ x86_64) pp_rpm_arch_std=x86_64;;
+ ppc) pp_rpm_arch_std=ppc;;
+ ppc64) pp_rpm_arch_std=ppc64;;
+ ia64) pp_rpm_arch_std=ia64;;
+ s390) pp_rpm_arch_std=s390;;
+ s390x) pp_rpm_arch_std=s390x;;
+ *) pp_rpm_arch_std=unknown;;
+ esac
+
+ #-- Later on, when files are processed, we use 'file' to determine
+ # what platform ABIs are used. This is used when pp_rpm_arch == auto
+ pp_rpm_arch_seen=
+}
+
+pp_rpm_detect_distro () {
+ pp_rpm_distro=
+ if test -f /etc/whitebox-release; then
+ pp_rpm_distro=`awk '
+ /^White Box Enterprise Linux release/ { print "wbel" $6; exit; }
+ ' /etc/whitebox-release`
+ elif test -f /etc/fedora-release; then
+ pp_rpm_distro=`awk '
+ /^Fedora Core release/ { print "fc" $4; exit; }
+ /^Fedora release/ { print "f" $3; exit; }
+ ' /etc/fedora-release`
+ elif test -f /etc/redhat-release; then
+ pp_rpm_distro=`awk '
+ /^Red Hat Enterprise Linux/ { print "rhel" $7; exit; }
+ /^CentOS release/ { print "centos" $3; exit; }
+ /^Red Hat Linux release/ { print "rh" $5; exit; }
+ ' /etc/redhat-release`
+ elif test -f /etc/SuSE-release; then
+ pp_rpm_distro=`awk '
+ /^SuSE Linux [0-9]/ { print "suse" $3; exit; }
+ /^SUSE LINUX [0-9]/ { print "suse" $3; exit; }
+ /^openSUSE [0-9]/ { print "suse" $2; exit; }
+ /^S[uU]SE Linux Enterprise Server [0-9]/ { print "sles" $5; exit; }
+ /^S[uU]SE LINUX Enterprise Server [0-9]/ { print "sles" $5; exit; }
+ /^SuSE SLES-[0-9]/ { print "sles" substr($2,6); exit; }
+ ' /etc/SuSE-release`
+ fi
+ #pp_rpm_distro=`echo $pp_rpm_distro | tr -d .`
+ test -z "$pp_rpm_distro" &&
+ pp_warn "unknown distro"
+}
+
+pp_rpm_detect_rpmbuild () {
+ typeset cmd
+ for cmd in rpmbuild rpm; do
+ if `which $cmd > /dev/null 2>&1`; then
+ echo $cmd
+ return 0
+ fi
+ done
+
+ pp_error "Could not find rpmbuild"
+ # Default to `rpmbuild` in case it magically appears
+ echo rpmbuild
+ return 1
+}
+
+pp_rpm_label () {
+ typeset label arg
+ label="$1"; shift
+ for arg
+ do
+ test -z "$arg" || echo "$label: $arg"
+ done
+}
+
+pp_rpm_writefiles () {
+ typeset _l t m o g f p st fo farch
+ while read t m o g f p st; do
+ _l="$p"
+ test $t = d && _l="%dir ${_l%/}/"
+ if test x"$m" = x"-"; then
+ case "$t" in
+ d) m=755;;
+ f) m=644;;
+ esac
+ fi
+ test x"$o" = x"-" && o="${pp_rpm_defattr_uid:-root}"
+ test x"$g" = x"-" && g="${pp_rpm_defattr_gid:-root}"
+ _l="%attr($m,$o,$g) $_l"
+
+ if test "$t" = "f" -a x"$pp_rpm_arch" = x"auto"; then
+ fo=`file "${pp_destdir}$p" 2>/dev/null`
+ #NB: The following should match executables and shared objects,
+ #relocatable objects. It will not match .a files however.
+ case "$fo" in
+ *": ELF 32-bit LSB "*", Intel 80386"*)
+ farch=i386;;
+ *": ELF 64-bit LSB "*", AMD x86-64"*|\
+ *": ELF 64-bit LSB "*", x86-64"*)
+ farch=x86_64;;
+ *": ELF 32-bit MSB "*", PowerPC"*)
+ farch=ppc;;
+ *": ELF 64-bit LSB "*", IA-64"*)
+ farch=ia64;;
+ *": ELF 32-bit MSB "*", IBM S/390"*)
+ farch=s390;;
+ *": ELF 64-bit MSB "*", IBM S/390"*)
+ farch=s390x;;
+ *)
+ farch=noarch;;
+ esac
+ pp_debug "file: $fo -> $farch"
+ test x"$farch" = x"noarch" || pp_add_to_list pp_rpm_arch_seen $farch
+ fi
+
+ case $f in *v*) _l="%config $_l";; esac
+ echo "$_l"
+ done
+ echo
+}
+
+pp_rpm_subname () {
+ case "$1" in
+ run) : ;;
+ dbg) echo "${2}${pp_rpm_dbg_pkgname}";;
+ dev) echo "${2}${pp_rpm_dev_pkgname}";;
+ doc) echo "${2}${pp_rpm_doc_pkgname}";;
+ *) pp_error "unknown component '$1'";
+ esac
+}
+
+pp_rpm_depend () {
+ while read _name _vers; do
+ case "$_name" in ""| "#"*) continue ;; esac
+ echo "Requires: $_name ${_vers:+>= $_vers}"
+ done
+}
+
+pp_backend_rpm () {
+ typeset cmp specfile _summary _group _desc _pkg _subname svc
+
+ specfile=$pp_wrkdir/$name.spec
+ : > $specfile
+
+ #-- force existence of a 'run' component
+ pp_add_component run
+ : >> $pp_wrkdir/%files.run
+
+ if test -z "$pp_rpm_arch"; then
+ pp_error "Unknown RPM architecture"
+ return 1
+ fi
+
+ #-- Write the header components of the RPM spec file
+ cat <<-. >>$specfile
+ Name: ${pp_rpm_name:-$name}
+ Version: ${pp_rpm_version:-$version}
+ Release: ${pp_rpm_release:-1}
+ Summary: ${pp_rpm_summary:-$summary}
+ Group: ${pp_rpm_group}
+ License: ${pp_rpm_license}
+.
+ if test -n "$pp_rpm_url"; then
+ pp_rpm_label "URL" "$pp_rpm_url" >>$specfile
+ fi
+ pp_rpm_label "Vendor" "${pp_rpm_vendor:-$vendor}" >>$specfile
+ pp_rpm_label "Packager" "$pp_rpm_packager" >>$specfile
+ pp_rpm_label "Provides" "$pp_rpm_provides" >>$specfile
+
+ test -n "$pp_rpm_serial" && pp_warn "pp_rpm_serial deprecated"
+ if test -n "$pp_rpm_epoch"; then
+ #-- Epoch was introduced in RPM 2.5.6
+ case `$pp_rpm_rpmbuild --version 2>/dev/null` in
+ 1.*|2.[0-5].*|2.5.[0-5])
+ pp_rpm_label "Serial" $pp_rpm_epoch >>$specfile;;
+ *)
+ pp_rpm_label "Epoch" $pp_rpm_epoch >>$specfile;;
+ esac
+ fi
+
+ if test -n "$pp_rpm_requires"; then
+ pp_rpm_label "Requires" "$pp_rpm_requires" >>$specfile
+ elif test -s $pp_wrkdir/%depend.run; then
+ pp_rpm_depend < $pp_wrkdir/%depend.run >> $specfile
+ fi
+
+ cat <<-. >>$specfile
+
+ %description
+ ${pp_rpm_description:-$description}
+.
+
+ for cmp in $pp_components; do
+ case $cmp in
+ run) continue;;
+ dev) _summary="development tools for $pp_rpm_summary"
+ _group="$pp_rpm_dev_group"
+ _desc="${pp_rpm_dev_description:-Development libraries for $name. $pp_rpm_description.}"
+ ;;
+ doc) _summary="documentation for $pp_rpm_summary"
+ _group="$pp_rpm_doc_group"
+ _desc="${pp_rpm_doc_description:-Documentation for $name. $pp_rpm_description.}"
+ ;;
+ dbg) _summary="diagnostic tools for $pp_rpm_summary"
+ _group="$pp_rpm_dbg_group"
+ _desc="${pp_rpm_dbg_description:-Diagnostic tools for $name.}"
+ ;;
+ esac
+
+ _subname=`pp_rpm_subname $cmp`
+ cat <<-.
+
+ %package $_subname
+ Summary: $name $_summary
+ Group: $_group
+.
+ eval '_pkg="$pp_rpm_'$cmp'_requires"'
+ if test -n "$_pkg"; then
+ eval pp_rpm_label Requires ${pp_rpm_name:-$name} $_pkg
+ elif test -s $pp_wrkdir/%depend.$cmp; then
+ pp_rpm_depend < $pp_wrkdir/%depend.$cmp >> $specfile
+ fi
+
+ eval '_pkg="$pp_rpm_'$cmp'_provides"'
+ eval pp_rpm_label Provides $_pkg
+
+ cat <<-.
+
+ %description $_subname
+ $_desc
+.
+ done >>$specfile
+
+ #-- NB: we don't put any %prep, %build or %install RPM sections
+ # into the spec file.
+
+ #-- add service start/stop code
+ if test -n "$pp_services"; then
+ pp_rpm_service_install_common >> $pp_wrkdir/%post.run
+
+ #-- record the uninstall commands in reverse order
+ for svc in $pp_services; do
+ pp_load_service_vars $svc
+
+ pp_rpm_service_make_init_script $svc
+
+ #-- append %post code to install the svc
+ pp_rpm_service_install $svc >> $pp_wrkdir/%post.run
+
+ #-- prepend %preun code to uninstall svc
+ # (use files in case vars are modified)
+ pp_rpm_service_remove $svc | pp_prepend $pp_wrkdir/%preun.run
+ done
+ pp_rpm_service_remove_common | pp_prepend $pp_wrkdir/%preun.run
+ fi
+
+ # make convenience service groups
+ if test -n "$pp_service_groups"; then
+ for grp in $pp_service_groups; do
+ pp_rpm_service_group_make_init_script \
+ $grp "`pp_service_get_svc_group $grp`"
+ done
+ fi
+
+ #-- Write the RPM %file sections
+ # (do this after services, since services adds to %files.run)
+ for cmp in $pp_components; do
+ _subname=`pp_rpm_subname $cmp`
+
+ if test -s $pp_wrkdir/%check.$cmp; then
+ echo ""
+ echo "%pre $_subname"
+ cat $pp_wrkdir/%check.$cmp
+ echo : # causes script to exit true by default
+ fi
+
+ if test -s $pp_wrkdir/%files.$cmp; then
+ echo ""
+ echo "%files $_subname"
+ pp_rpm_writefiles < $pp_wrkdir/%files.$cmp
+ fi
+
+ if test -s $pp_wrkdir/%post.$cmp; then
+ echo ""
+ echo "%post $_subname"
+ cat $pp_wrkdir/%post.$cmp
+ echo : # causes script to exit true
+ fi
+
+ if test -s $pp_wrkdir/%preun.$cmp; then
+ echo ""
+ echo "%preun $_subname"
+ cat $pp_wrkdir/%preun.$cmp
+ echo : # causes script to exit true
+ fi
+ done >>$specfile
+
+ #-- create a suitable work area for rpmbuild
+ echo "%_topdir $pp_wrkdir" >$pp_wrkdir/.rpmmacros
+ mkdir $pp_wrkdir/RPMS
+ mkdir $pp_wrkdir/BUILD
+
+ if test x"$pp_rpm_arch" = x"auto"; then
+ #-- Reduce the arch_seen list to exactly one item
+ case "$pp_rpm_arch_seen" in
+ "i386 x86_64"|"x86_64 i386")
+ pp_rpm_arch_seen=x86_64;;
+ *" "*)
+ pp_warn "detected multiple targets: $pp_rpm_arch_seen"
+ pp_rpm_arch_seen=unknown;; # not detected
+ "")
+ pp_warn "detected no binaries: using target noarch"
+ pp_rpm_arch_seen=noarch;;
+ *)
+ pp_debug "detected architecture $pp_rpm_arch_seen"
+ esac
+ pp_rpm_arch="$pp_rpm_arch_seen"
+ fi
+
+ . $pp_wrkdir/%fixup
+
+$pp_opt_debug && cat $specfile
+
+ pp_debug "creating: `pp_backend_rpm_names`"
+
+pp_debug "pp_rpm_arch_seen = <${pp_rpm_arch_seen}>"
+pp_debug "pp_rpm_arch = <${pp_rpm_arch}>"
+
+ HOME=$pp_wrkdir \
+ pp_verbose \
+ $pp_rpm_rpmbuild -bb \
+ --buildroot="$pp_destdir/" \
+ --target="${pp_rpm_arch}" \
+ --define='_unpackaged_files_terminate_build 0' \
+ `$pp_opt_debug && echo --verbose || echo --quiet` \
+ $pp_rpm_rpmbuild_extra_flags \
+ $specfile ||
+ pp_error "Problem creating RPM packages"
+
+ for f in `pp_backend_rpm_names`; do
+ # The package might be in an arch-specific subdir
+ pkgfile=not-found
+ for dir in $pp_wrkdir/RPMS/${pp_rpm_arch} $pp_wrkdir/RPMS; do
+ if test -f $dir/$f; then
+ pkgfile=$dir/$f
+ fi
+ done
+ if test x"$pkgfile" = x"not-found"; then
+ pp_error "Problem predicting RPM filename: $f"
+ else
+ ln $pkgfile $pp_wrkdir/$f
+ fi
+ done
+}
+
+pp_rpm_output_name () {
+ echo "${pp_rpm_name:-$name}`pp_rpm_subname "$1" -`-${pp_rpm_version:-$version}-${pp_rpm_release:-1}.${pp_rpm_arch}.rpm"
+}
+
+pp_backend_rpm_names () {
+ typeset cmp _subname
+ for cmp in $pp_components; do
+ pp_rpm_output_name $cmp
+ done
+}
+
+pp_backend_rpm_cleanup () {
+ :
+}
+
+pp_rpm_print_requires () {
+ typeset _subname _name
+
+ echo "CPU:$pp_rpm_arch"
+ ## XXX should be lines of the form (from file/ldd/objdump)
+ # EXEC:/bin/sh
+ # RTLD:libc.so.4:open
+ rpm -q --requires -p $pp_wrkdir/`pp_rpm_output_name $1` |sed -e '/^rpmlib(/d;s/ //g;s/^/RPM:/' | sort -u
+}
+
+pp_backend_rpm_install_script () {
+ typeset cmp _subname
+
+ echo "#!/bin/sh"
+ pp_install_script_common
+
+ cat <<.
+
+ cmp_to_pkgname () {
+ typeset oi name
+ if test x"\$1" = x"--only-installed"; then
+ #-- only print if installation detected
+ oi=false
+ shift
+ else
+ oi=true
+ fi
+ test x"\$*" = x"all" &&
+ set -- $pp_components
+ for cmp
+ do
+ case \$cmp in
+.
+ for cmp in $pp_components; do
+ _subname=`pp_rpm_subname $cmp -`
+ echo "$cmp) name=${pp_rpm_name:-$name}${_subname};;"
+ done
+ cat <<.
+ *) usage;;
+ esac
+ if \$oi || rpm -q "\$name" >/dev/null 2>/dev/null; then
+ echo "\$name"
+ fi
+ done
+ }
+
+
+ cmp_to_pathname () {
+ test x"\$*" = x"all" &&
+ set -- $pp_components
+ for cmp
+ do
+ case \$cmp in
+.
+ for cmp in $pp_components; do
+ echo "$cmp) echo \${PP_PKGDESTDIR:-.}/`pp_rpm_output_name $cmp` ;;"
+ done
+ cat <<.
+ *) usage;;
+ esac
+ done
+ }
+
+ print_requires () {
+ test x"\$*" = x"all" &&
+ set -- $pp_components
+ for cmp
+ do
+ case \$cmp in
+.
+ for cmp in $pp_components; do
+ echo "$cmp) cat <<'._end'"
+ pp_rpm_print_requires $cmp
+ echo "._end"; echo ';;'
+ done
+ cat <<.
+ *) usage;;
+ esac
+ done
+ }
+
+ test \$# -eq 0 && usage
+ op="\$1"; shift
+ case "\$op" in
+ list-components)
+ test \$# -eq 0 || usage \$op
+ echo $pp_components
+ ;;
+ list-services)
+ test \$# -eq 0 || usage \$op
+ echo $pp_services
+ ;;
+ list-files)
+ test \$# -ge 1 || usage \$op
+ cmp_to_pathname "\$@"
+ ;;
+ install)
+ test \$# -ge 1 || usage \$op
+ verbose rpm -U --replacepkgs --oldpackage \
+ \`cmp_to_pathname "\$@"\`
+ ;;
+ uninstall)
+ test \$# -ge 1 || usage \$op
+ pkgs=\`cmp_to_pkgname --only-installed "\$@"\`
+ if test -z "\$pkgs"; then
+ verbosemsg "nothing to uninstall"
+ else
+ verbose rpm -e \$pkgs
+ fi
+ ;;
+ start|stop)
+ test \$# -ge 1 || usage \$op
+ ec=0
+ for svc
+ do
+ verbose /etc/init.d/\$svc \$op || ec=1
+ done
+ exit \$ec
+ ;;
+ print-platform)
+ test \$# -eq 0 || usage \$op
+ echo "linux-${pp_rpm_arch}"
+ ;;
+ print-requires)
+ test \$# -ge 1 || usage \$op
+ print_requires "\$@"
+ ;;
+ *)
+ usage
+ ;;
+ esac
+.
+
+}
+
+pp_backend_rpm_probe () {
+ echo "${pp_rpm_distro}-${pp_rpm_arch_std}"
+}
+
+pp_backend_rpm_vas_platforms () {
+ case "$pp_rpm_arch_std" in
+ x86_64) echo "linux-x86_64.rpm linux-x86.rpm";;
+ *86) echo "linux-x86.rpm";;
+ s390) echo "linux-s390";;
+ s390x) echo "linux-s390x";;
+ ppc*) echo "linux-glibc23-ppc64 linux-glibc22-ppc64";;
+ ia64) echo "linux-ia64";;
+ *) pp_die "unknown architecture $pp_rpm_arch_std";;
+ esac
+}
+
+pp_backend_rpm_init_svc_vars () {
+ pp_rpm_default_start_runlevels= # should be "3 4 5"??
+ pp_rpm_default_svc_description="No description"
+}
+
+pp_rpm_service_install_common () {
+ cat <<-'.'
+
+ _pp_install_service () {
+ typeset svc level
+ svc="$1"
+ if [ -x /usr/lib/lsb/install_initd -a ! -r /etc/redhat-release ]
+ then
+ # LSB-style install
+ /usr/lib/lsb/install_initd /etc/init.d/$svc
+ elif [ -x /sbin/chkconfig ]; then
+ # Red Hat/chkconfig-style install
+ /sbin/chkconfig --add $svc
+ /sbin/chkconfig $svc off
+ else
+ : # manual links under /etc/init.d
+ fi
+ }
+
+ _pp_enable_service () {
+ typeset svc level
+ svc="$1"
+ if [ -x /usr/lib/lsb/install_initd -a ! -r /etc/redhat-release ]
+ then
+ # LSB-style install
+ : not sure how to enable
+ elif [ -x /sbin/chkconfig ]; then
+ # Red Hat/chkconfig-style install
+ /sbin/chkconfig $svc on
+ else
+ # manual install
+ set -- `sed -n -e 's/^# Default-Start://p' /etc/init.d/$svc`
+ for level
+ do ln -sf /etc/init.d/$svc /etc/rc.d/rc$level.d/S90$svc; done
+ set -- `sed -n -e 's/^# Default-Stop://p' /etc/init.d/$svc`
+ for level
+ do ln -sf /etc/init.d/$svc /etc/rc.d/rc$level.d/K10$svc; done
+ fi
+ }
+.
+}
+
+pp_rpm_service_remove_common () {
+ cat <<-'.'
+
+ _pp_remove_service () {
+ typeset svc
+ svc="$1"
+ /etc/init.d/$svc stop >/dev/null 2>&1
+ if [ -x /usr/lib/lsb/remove_initd -a ! -r /etc/redhat-release ]
+ then
+ /usr/lib/lsb/remove_initd /etc/init.d/$svc
+ elif [ -x /sbin/chkconfig ]; then
+ /sbin/chkconfig --del $svc
+ else
+ rm -f /etc/rc.d/rc?.d/[SK]??$svc
+ fi
+ }
+.
+}
+
+
+pp_rpm_service_install () {
+ pp_rpm_service_make_init_script $1 >/dev/null ||
+ pp_error "could not create init script for service $1"
+ echo "_pp_install_service $1"
+ test $enable = yes && echo "_pp_enable_service $1"
+}
+
+pp_rpm_service_remove () {
+ echo "_pp_remove_service $1"
+}
+
+
+pp_backend_rpm_init_svc_vars () {
+
+ reload_signal=
+ start_runlevels=${pp_rpm_default_start_runlevels} # == lsb default-start
+ stop_runlevels="0 1 2 6" # == lsb default-stop
+ svc_description="${pp_rpm_default_svc_description}" # == lsb short descr
+ svc_process=
+
+ lsb_required_start='$local_fs $network'
+ lsb_should_start=
+ lsb_required_stop=
+ lsb_description=
+
+ start_priority=50
+ stop_priority=50 #-- stop_priority = 100 - start_priority
+}
+
+pp_rpm_service_group_make_init_script () {
+ typeset grp=$1
+ typeset svcs="$2"
+ typeset script=/etc/init.d/$grp
+ typeset out=$pp_destdir$script
+
+ pp_add_file_if_missing $script run 755 || return 0
+
+ cat <<-. >>$out
+ #!/bin/sh
+ svcs="$svcs"
+.
+
+ cat <<-'.' >>$out
+
+ #-- prints usage message
+ pp_usage () {
+ echo "usage: $0 {start|stop|status|restart|reload|condrestart|try-restart|force-reload}" >&2
+ return 2
+ }
+
+ #-- starts services in order.. stops them all if any break
+ pp_start () {
+ undo=
+ for svc in $svcs; do
+ if /etc/init.d/$svc start; then
+ undo="$svc $undo"
+ else
+ if test -n "$undo"; then
+ for svc in $undo; do
+ /etc/init.d/$svc stop
+ done
+ return 1
+ fi
+ fi
+ done
+ return 0
+ }
+
+ #-- stops services in reverse
+ pp_stop () {
+ reverse=
+ for svc in $svcs; do
+ reverse="$svc $reverse"
+ done
+ rc=0
+ for svc in $reverse; do
+ /etc/init.d/$svc stop || rc=$?
+ done
+ return $rc
+ }
+
+ #-- returns true only if all services return true status
+ pp_status () {
+ rc=0
+ for svc in $svcs; do
+ /etc/init.d/$svc status || rc=$?
+ done
+ return $rc
+ }
+
+ pp_reload () {
+ rc=0
+ for svc in $svcs; do
+ /etc/init.d/$svc reload || rc=$?
+ done
+ return $rc
+ }
+
+ case "$1" in
+ start) pp_start;;
+ stop) pp_stop;;
+ restart) pp_stop; pp_start;;
+ status) pp_status;;
+ try-restart|condrestart)
+ if pp_status >/dev/null; then
+ pp_restart
+ fi;;
+ reload) pp_reload;;
+ force-reload) if pp_status >/dev/null; then
+ pp_reload
+ else
+ pp_restart
+ fi;;
+ *) pp_usage;;
+ esac
+.
+ chmod 755 $out
+}
+
+pp_rpm_service_make_init_script () {
+ typeset svc=$1
+ typeset script=/etc/init.d/$svc
+ typeset out=$pp_destdir$script
+ typeset _process _cmd _rpmlevels
+
+ pp_add_file_if_missing $script run 755 || return 0
+
+ #-- start out as an empty shell script
+ cat <<-'.' >$out
+ #!/bin/sh
+.
+
+ #-- determine the process name from $cmd unless $svc_process is given
+ set -- $cmd
+ _process=${svc_process:-"$1"}
+
+ #-- construct a start command that builds a pid file if needed
+ _cmd="$cmd";
+ if test -z "$pidfile"; then
+ pidfile=/var/run/$svc.pid
+ _cmd="$cmd & echo \$! > \$pidfile"
+ fi
+ if test "$user" != "root"; then
+ _cmd="su $user -c exec $_cmd";
+ fi
+
+ #-- generate the Red Hat chkconfig headers
+ _rpmlevels=`echo $start_runlevels | tr -d ' '`
+ cat <<-. >>$out
+ # chkconfig: ${_rpmlevels:--} ${start_priority:-50} ${stop_priority:-50}
+ # description: ${svc_description:-no description}
+ # processname: ${_process}
+ # pidfile: ${pidfile}
+.
+
+ #-- generate the LSB init info
+ cat <<-. >>$out
+ ### BEGIN INIT INFO
+ # Provides: ${svc}
+ # Required-Start: ${lsb_required_start}
+ # Should-Start: ${lsb_should_start}
+ # Required-Stop: ${lsb_required_stop}
+ # Default-Start: ${start_runlevels}
+ # Default-Stop: ${stop_runlevels}
+ # Short-Description: ${svc_description}
+ ### END INIT INFO
+ # Generated by PolyPackage ${pp_version}
+ # ${copyright}
+
+.
+
+ if test x"${svc_description}" = x"${pp_rpm_default_svc_description}"; then
+ svc_description=
+ fi
+
+ #-- write service-specific definitions
+ cat <<. >>$out
+ #-- definitions specific to service ${svc}
+ svc_name="${svc_description:-$svc service}"
+ user="${user}"
+ pidfile="${pidfile}"
+ stop_signal="${stop_signal}"
+ reload_signal="${reload_signal}"
+ pp_exec_cmd () { $_cmd; }
+.
+
+ #-- write the generic part of the init script
+ cat <<'.' >>$out
+
+ #-- use system message logging, if available
+ if [ -f /lib/lsb/init-functions -a ! -r /etc/redhat-release ]; then
+ . /lib/lsb/init-functions
+ pp_success_msg () { log_success_msg "$@"; }
+ pp_failure_msg () { log_failure_msg "$@"; }
+ pp_warning_msg () { log_warning_msg "$@"; }
+ elif [ -f /etc/init.d/functions ]; then
+ . /etc/init.d/functions
+ pp_success_msg () { echo -n "$*"; success "$@"; echo; }
+ pp_failure_msg () { echo -n "$*"; failure "$@"; echo; }
+ pp_warning_msg () { echo -n "$*"; warning "$@"; echo; }
+ else
+ pp_success_msg () { echo ${1:+"$*:"} OK; }
+ pp_failure_msg () { echo ${1:+"$*:"} FAIL; }
+ pp_warning_msg () { echo ${1:+"$*:"} WARNING; }
+ fi
+
+ #-- prints a status message
+ pp_msg () { echo -n "$*: "; }
+
+ #-- prints usage message
+ pp_usage () {
+ echo "usage: $0 {start|stop|status|restart|reload|condrestart|try-restart|force-reload}" >&2
+ return 2
+ }
+
+ #-- reloads the service, if possible
+ # returns 0=success 1=failure 3=unimplemented
+ pp_reload () {
+ test -n "$reload_signal" || return 3 # unimplemented
+ pp_msg "Reloading ${svc_name}"
+ if pp_signal -${reload_signal}; then
+ pp_success_msg
+ return 0
+ else
+ pp_failure_msg "not running"
+ return 1
+ fi
+ }
+
+ #-- delivers signal $1 to the pidfile
+ # returns 0=success 1=failure
+ pp_signal () {
+ if test -r "$pidfile"; then
+ read pid < $pidfile
+ kill "$@" "$pid" 2>/dev/null
+ else
+ return 1
+ fi
+ }
+
+ #-- prints information about the service status
+ # returns 0=running 1=crashed 3=stopped
+ pp_status () {
+ pp_msg "Checking for ${svc_name}"
+ if pp_signal -0; then
+ pp_success_msg "running"
+ return 0
+ elif test -r "$pidfile"; then
+ pp_failure_msg "not running (crashed)"
+ return 1
+ else
+ pp_failure_msg "not running"
+ return 3
+ fi
+ }
+
+ #-- starts the service
+ # returns 0=success 1=failure
+ pp_start () {
+ pp_msg "Starting ${svc_name}"
+ if pp_status >/dev/null; then
+ pp_warning_msg "already started"
+ return 0
+ elif pp_exec_cmd; then
+ pp_success_msg
+ return 0
+ else
+ pp_failure_msg "cannot start"
+ return 1
+ fi
+ }
+
+ #-- stops the service
+ # returns 0=success (always)
+ pp_stop () {
+ pp_msg "Stopping ${svc_name}"
+ if pp_signal -${stop_signal}; then
+ pp_success_msg
+ else
+ pp_success_msg "already stopped"
+ fi
+ rm -f "$pidfile"
+ return 0
+ }
+
+ #-- stops and starts the service
+ pp_restart () {
+ pp_stop
+ pp_start
+ }
+
+ case "$1" in
+ start) pp_start;;
+ stop) pp_stop;;
+ restart) pp_restart;;
+ status) pp_status;;
+ try-restart|condrestart)
+ if pp_status >/dev/null; then
+ pp_restart
+ fi;;
+ reload) pp_reload;;
+ force-reload) if pp_status >/dev/null; then
+ pp_reload
+ else
+ pp_restart
+ fi;;
+ *) pp_usage;;
+ esac
+
+.
+ chmod 755 $out
+}
+pp_backend_rpm_function () {
+ case $1 in
+ pp_mkgroup) cat<<'.';;
+ /usr/sbin/groupadd -f -r "$1"
+.
+ pp_mkuser:depends) echo pp_mkgroup;;
+ pp_mkuser) cat<<'.';;
+ pp_mkgroup "${2:-$1}" || return 1
+ /usr/sbin/useradd \
+ -g "${2:-$1}" \
+ -M -d "${3:-/nonexistent}" \
+ -s "${4:-/bin/false}" \
+ -r "$1"
+.
+ pp_havelib) cat<<'.';;
+ for pp_tmp_dir in `echo "/usr/lib:/lib${3:+:$3}" | tr : ' '`; do
+ test -r "$pp_tmp_dir/lib$1.so{$2:+.$2}" && return 0
+ done
+ return 1
+.
+ *) false;;
+ esac
+}
+
+: NOTES <<.
+
+ # creating a dmg file for publishing on the web
+ hdiutil create -srcfolder /path/foo foo.dmg
+ hdiutil internet-enable -yes /path/foo.dmg
+ # Layout for packages
+ <name>-<cpy>/component/<file>
+ <name>-<cpt>/extras/postinstall
+ <name>-<cpt>/extras/postupgrade
+ # /Developer/usr/bin/packagemaker (man packagemaker)
+
+ Make a bunch of packages, and then build a 'distribution'
+ which is only understood by macos>10.4
+
+ # Message files in the resource path used are
+ Welcome.{rtf,html,rtfd,txt} - limited text shown in Intro
+ ReadMe.{rtf,html,rtfd,txt} - scrollable/printable, after Intro
+ License.{rtf,html,rtfd,txt} - ditto, user must click 'Accept'
+ background.{jpg,tif,gif,pict,eps,pdf} 620x418 background image
+
+ # These scripts looked for in the resource path
+ InstallationCheck $pkgpath $defaultloc $targetvol
+ 0:ok 32:warn 32+x:warn[1] 64:stop 96+x:stop[2]
+ VolumeCheck $volpath
+ 0:ok 32:failure 32+x:failure[3]
+ preflight $pkgpath $targetloc $targetvol [priv]
+ preinstall $pkgpath $targetloc $targetvol [priv]
+ preupgrade $pkgpath $targetloc $targetvol [priv]
+ postinstall $pkgpath $targetloc $targetvol [priv]
+ postupgrade $pkgpath $targetloc $targetvol [priv]
+ postflight $pkgpath $targetloc $targetvol [priv]
+ 0:ok else fail (for all scripts)
+
+ A detailed reason is deduced by finding an index x (16..31)
+ in the file InstallationCheck.strings or VolumeCheck.strings.
+
+ Scripts marked [priv] are executed with root privileges.
+ None of the [priv] scripts are used by metapackages.
+
+ # Default permissions
+ Permissions of existing directories should match those
+ of a clean install of the OS; typically root:admin 0775
+ New directories or files should be 0775 or 0664 with the
+ appropriate user:group.
+ Exceptions:
+ /etc root:admin 0755
+ /var root:admin 0755
+
+ <http://developer.apple.com/documentation/DeveloperTools/Conceptual/SoftwareDistribution4/Concepts/sd_pkg_flags.html>
+ Info.plist = {
+ CFBundleGetInfoString: "1.2.3, Quest Software, Inc.",
+ CFBundleIdentifier: "com.quest.rc.openssh",
+ CFBundleShortVersionString: "1.2.3",
+ IFMajorVersion: 1,
+ IFMinorVersion: 2,
+ IFPkgFlagAllowBackRev: false,
+ IFPkgFlagAuthorizationAction: "AdminAuthorization",
+ IFPkgFlagDefaultLocation: "/",
+ IFPkgFlagFollowLinks: true,
+ IFPkgFlagInstallFat: false,
+ IFPkgFlagInstalledSize: <integer>, # this is added by packagemaker
+ IFPkgFlagIsRequired: false,
+ IFPkgFlagOverwritePermissions: false,
+ IFPkgFlagRelocatable: false,
+ IFPkgFlagRestartAction: "NoRestart",
+ IFPkgFlagRootVolumeOnly: false,
+ IFPkgFlagUpdateInstalledLanguages: false,
+ IFPkgFormatVersion= 0.10000000149011612,
+ IFRequirementDicts: [ {
+ Level = "requires",
+ SpecArgument = "/opt/quest/lib/libvas.4.2.0.dylib",
+ SpecType = "file",
+ TestObject = true,
+ TestOperator = "eq", } ]
+ }
+
+ Description.plist = {
+ IFPkgDescriptionDescription = "this is the description text",
+ IFPkgDescriptionTitle = "quest-openssh"
+ }
+
+ # Startup scripts
+ 'launchd' is a kind of combined inetd and rc/init.d system.
+ <http://developer.apple.com/documentation/MacOSX/Conceptual/BPSystemStartup/Articles/DesigningDaemons.html>
+ Create a /Library/LaunchDaemons/$daemonname.plist file
+ Examples found in /System/Library/LaunchDaemons/
+ See manual page launchd.plist(5) for details:
+
+ { Label: "com.quest.vintela.foo", # required
+ Program: "/sbin/program",
+ ProgramArguments: [ "/sbin/program", "arg1", "arg2" ], # required
+ RunAtLoad: true,
+ WatchPaths: [ "/etc/crontab" ],
+ QueueDirectories: [ "/var/cron/tabs" ],
+ inetdCompatibility: { Wait: false }, # inetd-only
+ OnDemand: false, # recommended
+ SessionCreate: true,
+ UserName: "nobody",
+ InitGroups: true,
+ Sockets: { # inetd only
+ Listeners: {
+ SockServiceName: "ssh",
+ Bonjour: ["ssh", "sftp-ssh"], } },
+ Disabled: false,
+ StandardErrorPath: "/dev/null",
+ }
+
+
+ How to add a new user
+ dscl . -create /Users/$user
+ dscl . -create /Users/$user UserShell /bin/bash
+ dscl . -create /Users/$user RealName "$user"
+ dscl . -create /Users/$user UniqueID $uid
+ dscl . -create /Users/$user PrimaryGroupID $gid
+ dscl . -create /Users/$user NFSHomeDirectory /Users/$user
+ dscl . -passwd /Users/$user "$passwd"
+ mkdir /Users/$user
+ chown $uid.$gid /Users/$user
+
+.
+
+
+pp_platforms="$pp_platforms macos"
+
+pp_backend_macos_detect () {
+ [ x"$1" = x"Darwin" ]
+}
+
+pp_backend_macos_init () {
+ pp_macos_default_bundle_id_prefix="com.quest.rc."
+ pp_macos_bundle_id=
+ pp_macos_bundle_vendor=
+ pp_macos_bundle_version=
+ pp_macos_bundle_info_string=
+ pp_macos_prog_packagemaker=/Developer/usr/bin/packagemaker
+ pp_macos_pkg_domain=anywhere
+ pp_macos_pkg_extra_flags=
+}
+
+pp_macos_plist () {
+ typeset in
+ in=""
+ while test $# -gt 0; do
+ case "$1" in
+
+ start-plist) cat <<-.; in=" "; shift ;;
+ <?xml version="1.0" encoding="UTF-8"?>
+ <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN"
+ "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
+ <plist version="1.0">
+.
+ end-plist) echo "</plist>"; in=; shift;;
+
+ '[') echo "$in<array>"; in="$in "; shift;;
+ ']') echo "$in</array>"; in="${in# }"; shift;;
+ '{') echo "$in<dict>"; in="$in "; shift;;
+ '}') echo "$in</dict>"; in="${in# }"; shift;;
+ key) shift; echo "$in<key>$1</key>"; shift;;
+ string) shift;
+ echo "$1" | sed -e 's/&/&/g;s/</\</g;s/>/\>/g;' \
+ -e 's/^/'"$in"'<string>/;s/$/<\/string>/';
+ shift;;
+ true) echo "$in<true />"; shift;;
+ false) echo "$in<false />"; shift;;
+ real) shift; echo "$in<real>$1</real>"; shift;;
+ integer) shift; echo "$in<integer>$1</integer>"; shift;;
+ date) shift; echo "$in<date>$1</date>"; shift;; # ISO 8601 format
+ data) shift; echo "$in<data>$1</data>"; shift;; # base64 encoded
+ *) pp_error "pp_macos_plist: bad argument '$1'"; shift;;
+ esac
+ done
+}
+
+pp_macos_rewrite_cpio () {
+ typeset script
+ script=$pp_wrkdir/cpio-rewrite.pl
+ # rely on the fact that OS X comes with perl. It is a little easier to
+ # re-write a binary stream with perl than it is with posix :)
+ #
+ # A CPIO header block has octal fields at the following offset/lengths:
+ # 0 6 magic
+ # 6 6 dev
+ # 12 6 ino
+ # 18 6 mode
+ # 24 6 uid
+ # 30 6 gid
+ # 36 6 nlink
+ # 42 6 rdev
+ # 48 11 mtime
+ # 59 6 namesize
+ # 65 11 filesize
+ # 76 --
+ cat <<-'.' >$script
+ while (<DATA>) {
+ my ($type,$mode,$uid,$gid,$flags,$name) =
+ m/^(.) (\d+) (\S+) (\S+) (\S+) (.*)/;
+ $uid = 0 if $uid eq "-";
+ $gid = 0 if $gid eq "-";
+ if ($uid ne "=" and $uid =~ m/\D/) {
+ my @pw = getpwnam($uid) or die "bad username '$uid'";
+ $uid = $pw[2];
+ }
+ if ($gid ne "=" and $gid =~ m/\D/) {
+ my @gr = getgrnam($gid) or die "bad group '$gid'";
+ $gid = $gr[2];
+ }
+ $name = ".".$name."\0";
+ $ok{$name} = 1;
+ $uid{$name} = sprintf("%06o",int($uid)) unless $uid eq "=";
+ $gid{$name} = sprintf("%06o",int($gid)) unless $gid eq "=";
+ $mode{$name} = sprintf("%06o",oct($mode)) unless $mode eq "=";
+ }
+ $ok{"TRAILER!!!\0"} = 1;
+ while (!eof STDIN) {
+ read STDIN, $header, 76;
+ die "bad magic" unless $header =~ m/^070707/;
+ $namesize = oct(substr($header,59,6));
+ $filesize = oct(substr($header,65,11));
+ read STDIN, $name, $namesize;
+ # convert uid and gid to 0
+ substr($header, 24, 6) = $uid{$name} if defined($uid{$name});
+ substr($header, 30, 6) = $gid{$name} if defined($gid{$name});
+ substr($header, 18, 6) = $mode{$name} if defined($mode{$name});
+ print ($header, $name) if $ok{$name};
+ # copy-through the file data
+ while ($filesize > 0) {
+ my $seg = 8192;
+ $seg = $filesize if $filesize < $seg;
+ undef $data;
+ read STDIN, $data, $seg;
+ print $data if $ok{$name};
+ $filesize -= $seg;
+ }
+ }
+ exit(0);
+ __DATA__
+.
+ # Append to the script the %files data
+ cat "$@" </dev/null >> $script
+ /usr/bin/perl $script || pp_error "pp_macos_rewrite_cpio error";
+}
+
+pp_macos_files_bom () {
+ typeset _l t m o g f p st owner
+ while read t m o g f p st; do
+ # make sure that $m is padded up to 4 digits long
+ case "$m" in
+ ?) m="000$m";;
+ ??) m="00$m";;
+ ???) m="0$m";;
+ ?????*) pp_fatal "pp_macos_writebom: mode '$m' too long";;
+ esac
+
+ # convert owner,group into owner/group in octal
+ case $o in -) o=0;; esac
+ case $g in -) g=0;; esac
+ owner=`pp_d2o $o`/`pp_d2o $g`
+
+ case $t in
+ f)
+ echo ".$p 10$m $owner `
+ /usr/bin/cksum < "${pp_destdir}$p" |
+ awk '{print $2 " " $1}'`";;
+ d)
+ echo ".${p%/} 4$m $owner";;
+ s)
+ rl=`/usr/bin/readlink "${pp_destdir}$p"`
+ test x"$rl" = x"$st" ||
+ pp_error "symlink mismatch $rl != $st"
+ echo ".$p 12$m $owner `
+ /usr/bin/readlink -n "${pp_destdir}$p" |
+ /usr/bin/cksum |
+ awk '{print $2 " " $1}'` $st";;
+ esac
+ done
+}
+
+pp_macos_bom_fix_parents () {
+ perl -pe '
+ sub dirname { my $d=shift; $d=~s,/[^/]*$,,; $d; }
+ sub chk { my $d=shift;
+ &chk(&dirname($d)) if $d =~ m,/,;
+ unless ($seen{$d}++) {
+ print "$d\t40755\t0/0\n";
+ }
+ }
+ m/^\S+/;
+ &chk(&dirname($&));'
+}
+
+pp_macos_files_size () {
+ typeset _l t m o g f p st owner
+ while read t m o g f p st; do
+ case $t in
+ f) wc -c < "${pp_destdir}$p";;
+ s) echo 4095;;
+ d) ;; # always seems to be zero
+ esac
+ done | awk '{n+=1+int($1/4096)} END {print n*4}'
+}
+
+pp_o2d () {
+ awk 'BEGIN { x=0; '`echo "$1" |
+ sed -e 's/./x=x*8+&;/g'`'print x;}' </dev/null
+}
+pp_d2o () {
+ case "$1" in
+ [0-7]) echo $1;;
+ *) awk 'BEGIN { printf("%o\n", 0+('"$1"'));}' < /dev/null;;
+ esac
+}
+
+pp_macos_mkbom () {
+ #/usr/bin/mkbom -i $1 $2
+ typeset path mode ugid size cksum linkpath
+ typeset bomstage
+
+ # Use mkbom if it understands -i (avoids a copy)
+ if /usr/bin/mkbom -i /dev/null "$2" 2>/dev/null; then
+ rm -f "$2"
+ /usr/bin/mkbom -i "$1" "$2"
+ return
+ fi
+
+ # On 10.4 we have this nonsense.
+ pp_warn "mkbom workaround: copying source files to staging area"
+
+ bomstage=$pp_wrkdir/bom_stage
+ while IFS=' ' read path mode ugid size cksumi linkpath; do
+ if test -h "$pp_destdir/$path"; then
+ /bin/ln -s "$linkpath" "$bomstage/$path"
+ else
+ if test -d "$pp_destdir/$path"; then
+ /bin/mkdir -p "$bomstage/$path"
+ else
+ /bin/cp "$pp_destdir/$path" "$bomstage/$path"
+ fi
+ /bin/chmod $mode "$bomstage/$path"
+ /usr/sbin/chown `echo $ugid| tr / :` "$bomstage/$path"
+ fi
+ done <"$1"
+ (cd $bomstage && mkbom . $pp_wrkdir/bom_stage.bom) ||
+ pp_error "mkbom failed"
+ mv $pp_wrkdir/bom_stage.bom "$2"
+}
+
+pp_backend_macos () {
+ typeset dmgdir pkgdir Contents Resources lprojdir
+ typeset Info_plist Description_plist
+ typeset bundle_vendor bundle_version size
+
+ bundle_vendor=${pp_macos_bundle_vendor:-$vendor}
+
+ if test -z "$pp_macos_bundle_version"; then
+ bundle_version=`echo "$version.0.0.0" | sed -n -e 's/[^0-9.]//g' \
+ -e 's/^\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*/\1/p'`
+ if test x"$bundle_version" != x"$version"; then
+ pp_warn "converted version from '$version' to '$bundle_version'"
+ fi
+ else
+ bundle_version="$pp_macos_bundle_version"
+ fi
+
+ # build the package layout
+ dmgdir=$pp_wrkdir/$name-Installer
+ pkgdir=$dmgdir/$name-$version.pkg
+ Contents=$pkgdir/Contents
+ Resources=$Contents/Resources
+ lprojdir=$Resources/en.lproj
+ mkdir $dmgdir $pkgdir $Contents $Resources $lprojdir ||
+ pp_fatal "Can't make package temporary directories"
+
+ echo major: 1 > $Resources/package_version
+ echo minor: 0 >> $Resources/package_version
+
+ # compute the installed size
+ size=`cat $pp_wrkdir/%files.* | pp_macos_files_size`
+
+ #-- Create Info.plist
+ Info_plist=$Contents/Info.plist
+ pp_macos_plist \
+ start-plist \{ \
+ key CFBundleGetInfoString string \
+ "${pp_macos_bundle_info_string:-$version $bundle_vendor}" \
+ key CFBundleIdentifier string \
+ "${pp_macos_bundle_id:-$pp_macos_default_bundle_id_prefix$name}" \
+ key CFBundleShortVersionString string "$bundle_version" \
+ key IFMajorVersion integer 1 \
+ key IFMinorVersion integer 2 \
+ key IFPkgFlagAllowBackRev false \
+ key IFPkgFlagAuthorizationAction string "AdminAuthorization" \
+ key IFPkgFlagDefaultLocation string "/" \
+ key IFPkgFlagFollowLinks true \
+ key IFPkgFlagInstallFat false \
+ key IFPkgFlagInstalledSize integer $size \
+ key IFPkgFlagIsRequired false \
+ key IFPkgFlagOverwritePermissions false \
+ key IFPkgFlagRelocatable false \
+ key IFPkgFlagRestartAction string "NoRestart" \
+ key IFPkgFlagRootVolumeOnly false \
+ key IFPkgFlagUpdateInstalledLanguages false \
+ key IFPkgFormatVersion real 0.10000000149011612 > $Info_plist
+
+ # insert requirements(VAS)
+ pp_macos_plist \
+ key IFRequirementDicts \[ \
+ \{ \
+ key Level string "requires" \
+ key SpecArgument string "/opt/quest/lib/libvas.4.dylib" \
+ key SpecType string "file" \
+ key TestObject true \
+ key TestOperator string "eq" \
+ \} \
+ \] >> $Info_plist
+
+ # finish Info.plist
+ pp_macos_plist \} end-plist >> $Info_plist
+
+ # write en.lproj/Description.plist
+ Description_plist=$lprojdir/Description.plist
+ pp_macos_plist \
+ start-plist \{ \
+ key IFPkgDescriptionDescription string "$description" \
+ key IFPkgDescriptionTitle string "$name $version" \
+ \} end-plist > $Description_plist
+
+ # write Resources/postinstall
+ for cmp in $pp_components; do
+ if test -s $pp_wrkdir/%post.$cmp; then
+ if test ! -s $Resources/postinstall; then
+ echo "#!/bin/sh" > $Resources/postinstall
+ chmod +x $Resources/postinstall
+ fi
+ cat $pp_wrkdir/%post.$cmp >> $Resources/postinstall
+ echo : >> $Resources/postinstall
+ fi
+ done
+
+ # Warn that %preun scripts are simply ignored.
+ # However, write out a 'preuninstall' script, in case one day
+ # it is supported.
+ for cmp in $pp_components; do
+ if test -s $pp_wrkdir/%preun.$cmp; then
+ pp_warn "%preun scripts are ignored on OSX"
+ if test ! -s $Resources/preuninstall; then
+ echo "#!/bin/sh" > $Resources/preuninstall
+ chmod +x $Resources/preuninstall
+ fi
+ cat $pp_wrkdir/%preun.$cmp >> $Resources/preuninstall
+ echo : >> $Resources/preuninstall
+ fi
+ done
+
+ # Create the bill-of-materials (Archive.bom)
+ cat $pp_wrkdir/%files.* | pp_macos_files_bom | sort |
+ pp_macos_bom_fix_parents > $pp_wrkdir/tmp.bomls
+
+ pp_macos_mkbom $pp_wrkdir/tmp.bomls $Contents/Archive.bom
+
+ # Create the cpio archive (Archive.pax.gz)
+ # On 10.5, we used "-f -" to write explicitly to stdout
+ (cd $pp_destdir && /bin/pax -w .) |
+ gzip -9 -c > $Contents/Archive.pax.gz
+
+ # create a package using packagemaker
+
+ #-- convert the pkg file into a disk image (dmg file)
+ if [ -d $dmgdir/$name-$version.pkg ]; then
+ dmg=`pp_backend_macos_names`
+ { pp_verbose hdiutil create \
+ -srcfolder $dmgdir \
+ -mode 555 \
+ $pp_wrkdir/$dmg &&
+ pp_verbose hdiutil internet-enable -yes $pp_wrkdir/$dmg; } ||
+ pp_error "unable to build disk image"
+ else
+ pp_error "$dmgdir/$name-$version.pkg: not created"
+ fi
+}
+
+pp_backend_macos_cleanup () {
+ :
+}
+
+pp_backend_macos_names () {
+ echo ${name}-${version}.dmg
+}
+
+pp_backend_macos_install_script () {
+ echo '#!/bin/sh'
+ typeset pkgname platform
+
+ pkgname="`pp_backend_macos_names`"
+ platform="`pp_backend_macos_probe`"
+ pp_install_script_common
+
+ cat <<.
+ test \$# -eq 0 && usage
+ op="\$1"; shift
+
+ case "\$op" in
+ list-components)
+ test \$# -eq 0 || usage \$op
+ echo "$pp_components"
+ ;;
+ list-services)
+ test \$# -eq 0 || usage \$op
+ echo "$pp_services"
+ ;;
+ list-files)
+ test \$# -ge 1 || usage \$op
+ echo \${PP_PKGDESTDIR:-.}/"$pkgname"
+ ;;
+ install)
+ test \$# -ge 1 || usage \$op
+ vol=/Volumes/pp\$\$
+ pkg=\$vol/${name}-${version}.pkg
+ hdiutil attach -readonly -mountpoint \$vol \
+ \${PP_PKGDESTDIR:-.}/"$pkgname"
+ trap "hdiutil detach \$vol" 0
+ installer -pkginfo -pkg \$pkg
+ installer -verbose -pkg \$pkg -target /
+ ;;
+ uninstall)
+ test \$# -ge 1 || usage \$op
+ # XXX
+ echo "Uninstall not implemented" >&2
+ exit 1;;
+ start|stop)
+ test \$# -ge 1 || usage \$op
+ ec=0
+ for svc
+ do
+ # XXX
+ echo "\${op} not implemented" >&2
+ ec=1
+ done
+ exit \$ec
+ ;;
+ print-platform)
+ echo "$platform"
+ ;;
+ *)
+ usage;;
+ esac
+.
+}
+
+pp_backend_macos_init_svc_vars () {
+ :
+}
+
+pp_backend_macos_probe () {
+ typeset name vers arch
+ case `sw_vers -productName` in
+ "Mac OS X") name="macos";;
+ *) name="unknown";;
+ esac
+ vers=`sw_vers -productVersion | sed -e 's/^\([^.]*\)\.\([^.]*\).*/\1\2/'`
+ arch=`arch`
+ echo "$name$vers-$arch"
+}
+
+pp_backend_macos_vas_platforms () {
+ echo "osx" # XXX non-really sure what they do.. it should be "macos"
+}
+pp_backend_macos_function () {
+ case $1 in
+ _pp_macos_search_unused) cat<<'.';;
+ # Find an unused value in the given path
+ # args: path attribute minid [maxid]
+ pp_tmp_val=$3
+ while :; do
+ test $pp_tmp_val -ge ${4:-999999} && return 1
+ /usr/bin/dscl . -search "$1" "$2" $pp_tmp_val |
+ grep . > /dev/null || break
+ pp_tmp_val=`expr $pp_tmp_val + 1`
+ done
+ echo $pp_tmp_val
+.
+ pp_mkgroup:depends) echo _pp_macos_search_unused;;
+ pp_mkgroup) cat<<'.';;
+ set -e
+ /usr/bin/dscl . -read /Groups/"$1" >/dev/null 2>&1 && return
+ pp_tmp_gid=`_pp_macos_search_unused /Groups PrimaryGroupID 100`
+ /usr/bin/dscl . -create /Groups/"$1"
+ /usr/bin/dscl . -create /Groups/"$1" PrimaryGroupID $pp_tmp_gid
+ /usr/bin/dscl . -create /Groups/"$1" RealName "Group $1"
+ /usr/bin/dscl . -create /Groups/"$1" GroupMembership ""
+ /usr/bin/dscl . -create /Groups/"$1" Password '*'
+.
+ pp_mkuser:depends) echo pp_mkgroup _pp_macos_search_unused;;
+ pp_mkuser) cat<<'.';;
+ set -e
+ /usr/bin/dscl . -read /Users/"$1" >/dev/null 2>&1 && return
+ pp_tmp_uid=`_pp_macos_search_unused /Users UniqueID 100`
+ pp_mkgroup "${2:-$1}"
+ pp_tmp_gid=`/usr/bin/dscl . -read /Groups/"${2:-$1}" \
+ PrimaryGroupID | awk '{print $2}'`
+ /usr/bin/dscl . -create /Users/"$1"
+ /usr/bin/dscl . -create /Users/"$1" PrimaryGroupID $pp_tmp_gid
+ /usr/bin/dscl . -create /Users/"$1" NFSHomeDirectory \
+ "${3:-/var/empty}"
+ /usr/bin/dscl . -create /Users/"$1" UserShell \
+ "${4:-/usr/bin/false}"
+ /usr/bin/dscl . -create /Users/"$1" RealName "$1"
+ /usr/bin/dscl . -create /Users/"$1" UniqueID $pp_tmp_uid
+ /usr/bin/dscl . -create /Users/"$1" Password '*'
+.
+ pp_havelib) cat<<'.';;
+ # (use otool -L to find dependent libraries)
+ for pp_tmp_dir in `echo "${3:+$3:}/usr/local/lib:/lib:/usr/lib" |
+ tr : ' '`; do
+ test -r "$pp_tmp_dir/lib$1{$2:+.$2}.dylib" && return 0
+ done
+ return 1
+.
+ *) false;;
+ esac
+}
+
+pp_platforms="$pp_platforms inst"
+
+pp_backend_inst_detect () {
+ case "$1" in
+ IRIX*) return 0;;
+ *) return 1;;
+ esac
+}
+
+pp_backend_inst_init () {
+ pp_readlink_fn=pp_ls_readlink
+}
+
+
+pp_backend_inst () {
+ :
+}
+
+pp_backend_inst_cleanup () {
+ :
+}
+
+pp_backend_inst_names () {
+ :
+}
+
+pp_backend_inst_install_script () {
+ :
+}
+
+pp_backend_inst_function () {
+ echo false
+}
+
+pp_backend_inst_init_svc_vars () {
+ :
+}
+
+pp_backend_inst_probe () {
+ cpu=`hinv|sed -n '/^CPU/{s/000 /k /;s/^CPU: //;s/ Process.*//;s/^MIPS //;p;q;}'|tr A-Z a-z`
+ echo irix`uname -r`-$cpu
+}
+
+pp_backend_inst_vas_platforms () {
+:
+}
+
+pp_platforms="$pp_platforms null"
+
+pp_backend_null_detect () {
+ ! :
+}
+
+pp_backend_null_init () {
+ :
+}
+
+
+pp_backend_null () {
+ :
+}
+
+pp_backend_null_cleanup () {
+ :
+}
+
+pp_backend_null_names () {
+ :
+}
+
+pp_backend_null_install_script () {
+ :
+}
+
+pp_backend_null_function () {
+ echo false
+}
+
+pp_backend_null_init_svc_vars () {
+ :
+}
+
+pp_backend_null_probe () {
+ echo unknown-unknown
+}
+
+pp_backend_null_vas_platforms () {
+:
+}
+
+
+quest_require_vas () {
+ typeset v d
+
+ if test $# -ne 1; then
+ return
+ fi
+ set -- `echo "$1" | tr . ' '` 0 0 0
+
+ for d
+ do
+ echo $d | grep '^[0-9][0-9]*$' > /dev/null ||
+ pp_error "quest_require_vas: Bad version component $d"
+ done
+
+ test $# -lt 4 &&
+ pp_error "quest_require_vas: missing version number"
+
+ case "$1.$2.$3.$4" in
+ *.0.0.0) v=$1;;
+ *.*.0.0) v=$1.$2;;
+ *.*.*.0) v=$1.$2.$3;;
+ *) v=$1.$2.$3.$4;;
+ esac
+
+ cat <<.
+ if test -x /opt/quest/bin/vastool &&
+ /opt/quest/bin/vastool -v |
+ awk 'NR == 1 {print \$4}' |
+ awk -F. '{ if (\$1<$1 || \$1==$1 && ( \
+ \$2<$2 || \$2==$2 && ( \
+ \$3<$3 || \$2==$3 && ( \
+ \$4<$4 )))) exit(1); }'
+ then
+ exit 0
+ else
+ echo "Requires VAS $v or later"
+ exit 1
+ fi
+.
+}
+pp_main ${1+"$@"}
projects / sudo / commitdiff