tests = ['exec_001_pos', 'exec_002_neg']
[tests/functional/fault]
-tests = ['auto_online_001_pos', 'auto_replace_001_pos']
+tests = ['auto_online_001_pos', 'auto_replace_001_pos', 'auto_spare_001_pos',
+ 'auto_spare_002_pos.ksh']
[tests/functional/features/async_destroy]
tests = ['async_destroy_001_pos']
return 0
}
+#
+# Wait until a hotspare transitions to a given state or times out.
+#
+# Return 0 when pool/disk matches expected state, 1 on timeout.
+#
+function wait_hotspare_state # pool disk state timeout
+{
+ typeset pool=$1
+ typeset disk=${2#$/DEV_DSKDIR/}
+ typeset state=$3
+ typeset timeout=${4:-60}
+ typeset -i i=0
+
+ while [[ $i -lt $timeout ]]; do
+ if check_hotspare_state $pool $disk $state; then
+ return 0
+ fi
+
+ i=$((i+1))
+ sleep 1
+ done
+
+ return 1
+}
+
#
# Verify a given slog disk is inuse or avail
#
return 0
}
+#
+# Wait until a vdev transitions to a given state or times out.
+#
+# Return 0 when pool/disk matches expected state, 1 on timeout.
+#
+function wait_vdev_state # pool disk state timeout
+{
+ typeset pool=$1
+ typeset disk=${2#$/DEV_DSKDIR/}
+ typeset state=$3
+ typeset timeout=${4:-60}
+ typeset -i i=0
+
+ while [[ $i -lt $timeout ]]; do
+ if check_vdev_state $pool $disk $state; then
+ return 0
+ fi
+
+ i=$((i+1))
+ sleep 1
+ done
+
+ return 1
+}
+
#
# Check the output of 'zpool status -v <pool>',
# and to see if the content of <token> contain the <keyword> specified.
setup.ksh \
cleanup.ksh \
auto_online_001_pos.ksh \
- auto_replace_001_pos.ksh
+ auto_replace_001_pos.ksh \
+ auto_spare_001_pos.ksh \
+ auto_spare_002_pos.ksh
--- /dev/null
+#!/bin/ksh -p
+
+#
+# CDDL HEADER START
+#
+# This file and its contents are supplied under the terms of the
+# Common Development and Distribution License ("CDDL"), version 1.0.
+# You may only use this file in accordance with the terms of version
+# 1.0 of the CDDL.
+#
+# A full copy of the text of the CDDL should have accompanied this
+# source. A copy of the CDDL is also available via the Internet at
+# http://www.illumos.org/license/CDDL.
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright (c) 2017 by Intel Corporation. All rights reserved.
+#
+
+. $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/fault/fault.cfg
+
+#
+# DESCRIPTION:
+# Testing Fault Management Agent ZED Logic - Automated Auto-Spare Test when
+# drive is faulted due to IO ERRORS.
+#
+# STRATEGY:
+# 1. Create a pool with hot spares
+# 2. Create a filesystem with the primary cache disable to force reads
+# 3. Write a file to the pool to be read back
+# 4. Inject IO ERRORS on read with a zinject error handler
+# 5. Verify the ZED kicks in a hot spare and expected pool/device status
+# 6. Clear the fault
+# 7. Verify the hot spare is available and expected pool/device status
+#
+
+verify_runnable "both"
+
+function cleanup
+{
+ log_must zinject -c all
+ poolexists $TESTPOOL && destroy_pool $TESTPOOL
+ rm -f $VDEV_FILES $SPARE_FILE
+}
+
+log_assert "Testing automated auto-spare FMA test"
+
+log_onexit cleanup
+
+TESTFILE="/$TESTPOOL/$TESTFS/testfile"
+
+for type in "mirror" "raidz" "raidz2"; do
+ # 1. Create a pool with hot spares
+ truncate -s $SPA_MINDEVSIZE $VDEV_FILES $SPARE_FILE
+ log_must zpool create -f $TESTPOOL $type $VDEV_FILES spare $SPARE_FILE
+
+ # 2. Create a filesystem with the primary cache disable to force reads
+ log_must zfs create -o primarycache=none $TESTPOOL/$TESTFS
+ log_must zfs set recordsize=16k $TESTPOOL/$TESTFS
+
+ # 3. Write a file to the pool to be read back
+ log_must dd if=/dev/urandom of=$TESTFILE bs=1M count=16
+
+ # 4. Inject IO ERRORS on read with a zinject error handler
+ log_must zinject -d $FAULT_FILE -e io -T read $TESTPOOL
+ log_must cp $TESTFILE /dev/null
+
+ # 5. Verify the ZED kicks in a hot spare and expected pool/device status
+ log_note "Wait for ZED to auto-spare"
+ log_must wait_vdev_state $TESTPOOL $FAULT_FILE "FAULTED" 60
+ log_must wait_vdev_state $TESTPOOL $SPARE_FILE "ONLINE" 60
+ log_must wait_hotspare_state $TESTPOOL $SPARE_FILE "INUSE"
+ log_must check_state $TESTPOOL "" "DEGRADED"
+
+ # 6. Clear the fault
+ log_must zinject -c all
+ log_must zpool clear $TESTPOOL $FAULT_FILE
+
+ # 7. Verify the hot spare is available and expected pool/device status
+ log_must wait_vdev_state $TESTPOOL $FAULT_FILE "ONLINE" 60
+ log_must wait_hotspare_state $TESTPOOL $SPARE_FILE "AVAIL"
+ log_must is_pool_resilvered $TESTPOOL
+ log_must check_state $TESTPOOL "" "ONLINE"
+
+ cleanup
+done
+
+log_pass "Auto-spare test successful"
--- /dev/null
+#!/bin/ksh -p
+
+#
+# CDDL HEADER START
+#
+# This file and its contents are supplied under the terms of the
+# Common Development and Distribution License ("CDDL"), version 1.0.
+# You may only use this file in accordance with the terms of version
+# 1.0 of the CDDL.
+#
+# A full copy of the text of the CDDL should have accompanied this
+# source. A copy of the CDDL is also available via the Internet at
+# http://www.illumos.org/license/CDDL.
+#
+# CDDL HEADER END
+#
+
+#
+# Copyright (c) 2017 by Intel Corporation. All rights reserved.
+#
+
+. $STF_SUITE/include/libtest.shlib
+. $STF_SUITE/tests/functional/fault/fault.cfg
+
+#
+# DESCRIPTION:
+# Testing Fault Management Agent ZED Logic - Automated Auto-Spare Test when
+# drive is faulted due to CHECKSUM ERRORS.
+#
+# STRATEGY:
+# 1. Create a pool with hot spares
+# 2. Create a filesystem with the primary cache disable to force reads
+# 3. Write a file to the pool to be read back
+# 4. Inject CHECKSUM ERRORS on read with a zinject error handler
+# 5. Verify the ZED kicks in a hot spare and expected pool/device status
+# 6. Clear the fault
+# 7. Verify the hot spare is available and expected pool/device status
+#
+
+verify_runnable "both"
+
+function cleanup
+{
+ log_must zinject -c all
+ poolexists $TESTPOOL && destroy_pool $TESTPOOL
+ rm -f $VDEV_FILES $SPARE_FILE
+}
+
+log_assert "Testing automated auto-spare FMA test"
+
+log_onexit cleanup
+
+TESTFILE="/$TESTPOOL/$TESTFS/testfile"
+
+for type in "mirror" "raidz" "raidz2"; do
+ # 1. Create a pool with hot spares
+ truncate -s $SPA_MINDEVSIZE $VDEV_FILES $SPARE_FILE
+ log_must zpool create -f $TESTPOOL $type $VDEV_FILES spare $SPARE_FILE
+
+ # 2. Create a filesystem with the primary cache disable to force reads
+ log_must zfs create -o primarycache=none $TESTPOOL/$TESTFS
+ log_must zfs set recordsize=16k $TESTPOOL/$TESTFS
+
+ # 3. Write a file to the pool to be read back
+ log_must dd if=/dev/urandom of=$TESTFILE bs=1M count=16
+
+ # 4. Inject CHECKSUM ERRORS on read with a zinject error handler
+ log_must zinject -d $FAULT_FILE -e corrupt -f 50 -T read $TESTPOOL
+ log_must cp $TESTFILE /dev/null
+
+ # 5. Verify the ZED kicks in a hot spare and expected pool/device status
+ log_note "Wait for ZED to auto-spare"
+ log_must wait_vdev_state $TESTPOOL $FAULT_FILE "DEGRADED" 60
+ log_must wait_vdev_state $TESTPOOL $SPARE_FILE "ONLINE" 60
+ log_must wait_hotspare_state $TESTPOOL $SPARE_FILE "INUSE"
+ log_must check_state $TESTPOOL "" "DEGRADED"
+
+ # 6. Clear the fault
+ log_must zinject -c all
+ log_must zpool clear $TESTPOOL $FAULT_FILE
+
+ # 7. Verify the hot spare is available and expected pool/device status
+ log_must wait_vdev_state $TESTPOOL $FAULT_FILE "ONLINE" 60
+ log_must wait_hotspare_state $TESTPOOL $SPARE_FILE "AVAIL"
+ log_must check_state $TESTPOOL "" "ONLINE"
+
+ cleanup
+done
+
+log_pass "Auto-spare test successful"
else
DEV_DSKDIR="/dev"
fi
+
+export VDEV_FILES="$TEST_BASE_DIR/file-1 $TEST_BASE_DIR/file-2 \
+ $TEST_BASE_DIR/file-3 $TEST_BASE_DIR/file-4"
+export SPARE_FILE="$TEST_BASE_DIR/spare-1"
+export FAULT_FILE="$TEST_BASE_DIR/file-1"
projects / zfs / commitdiff