-% $Id$
-
-%override_acls.
-
-
-% Users that have admin access. Add line like one of the following after you
-% will be successfully registered on server to get admin access:
-%{acl, admin, {user, "aleksey"}}.
-%{acl, admin, {user, "ermine"}}.
-
-% Blocked users:
-%{acl, blocked, {user, "test"}}.
-
-% Local users:
-{acl, local, {user_regexp, ""}}.
-
-% Another examples of ACLs:
-%{acl, jabberorg, {server, "jabber.org"}}.
-%{acl, aleksey, {user, "aleksey", "jabber.ru"}}.
-%{acl, test, {user_regexp, "^test"}}.
-%{acl, test, {user_glob, "test*"}}.
-
-
-% Only admins can use configuration interface:
-{access, configure, [{allow, admin}]}.
-
-% Every username can be registered via in-band registration:
-{access, register, [{allow, all}]}.
-
-% After successful registration user will get message with following subject
-% and body:
-{welcome_message,
- {"Welcome!",
- "Welcome to Jabber Service. "
- "For information about Jabber visit http://jabber.org"}}.
-% Replace them with 'none' if you don't want to send such message:
-%{welcome_message, none}.
-
-% List of people who will get notifications about registered users
-%{registration_watchers, ["admin1@localhost",
-% "admin2@localhost"]}.
-
-% Only admins can send announcement messages:
-{access, announce, [{allow, admin}]}.
-
-
-% Only non-blocked users can use c2s connections:
-{access, c2s, [{deny, blocked},
- {allow, all}]}.
-
-% Set shaper with name "normal" to limit traffic speed to 1000B/s
-{shaper, normal, {maxrate, 1000}}.
-
-% Set shaper with name "fast" to limit traffic speed to 50000B/s
-{shaper, fast, {maxrate, 50000}}.
-
-% For all users except admins used "normal" shaper
-{access, c2s_shaper, [{none, admin},
- {normal, all}]}.
-
-% For all S2S connections used "fast" shaper
-{access, s2s_shaper, [{fast, all}]}.
-
-% Admins of this server are also admins of MUC service:
-{access, muc_admin, [{allow, admin}]}.
-
-% All users are allowed to use MUC service:
-{access, muc, [{allow, all}]}.
-
-% This rule allows access only for local users:
-{access, local, [{allow, local}]}.
-
-
-% Authentification method. If you want to use internal user base, then use
-% this line:
-{auth_method, internal}.
-
-% For LDAP authentification use these lines instead of above one:
-%{auth_method, ldap}.
-%{ldap_servers, ["localhost"]}. % List of LDAP servers
-%{ldap_uidattr, "uid"}. % LDAP attribute that holds user ID
-%{ldap_base, "dc=example,dc=com"}. % Base of LDAP directory
-
-% For authentification via external script use the following:
-%{auth_method, external}.
-%{extauth_program, "/path/to/authentification/script"}.
-
-
-% Host name:
-{host, "localhost"}.
-
-% Default language:
-{language, "en"}.
-
-% Listened ports:
-{listen,
- [
- {5222, ejabberd_c2s, [{access, c2s},
- {shaper, c2s_shaper}]},
-
-% To create selfsigned certificate run the following command from the
-% command prompt:
-%
-% openssl req -new -x509 -days 365 -nodes -out ejabberd.pem -keyout ejabberd.pem
-%
-% and answer the questions.
-% {5222, ejabberd_c2s, [{access, c2s},
-% starttls, {certfile, "./ejabberd.pem"},
-% {shaper, c2s_shaper}]},
-
-% When using SSL/TLS ssl option is not recommended (it requires patching
-% erlang ssl application). Use tls option instead (as shown below).
-% {5223, ejabberd_c2s, [{access, c2s},
-% tls, {certfile, "./ejabberd.pem"},
-% {shaper, c2s_shaper}]},
-
- {5269, ejabberd_s2s_in, [{shaper, s2s_shaper}]},
-
-% {5555, ejabberd_service, [{access, all},
-% {host, "icq.localhost", [{password, "secret"}]}]},
-
- {5280, ejabberd_http, [http_poll, web_admin]}
- ]}.
-
-% If SRV lookup fails, then port 5269 is used to communicate with remote server
-{outgoing_s2s_port, 5269}.
-
-
-% Used modules:
-{modules,
- [
- {mod_register, [{access, register}]},
- {mod_roster, []},
- {mod_privacy, []},
- {mod_configure, []},
- {mod_disco, []},
- {mod_stats, []},
- {mod_vcard, []},
- {mod_offline, []},
- {mod_announce, [{access, announce}]},
- {mod_private, []},
- {mod_irc, []},
-% Default options for mod_muc:
-% host: "conference." ++ ?MYNAME
-% access: all
-% access_create: all
-% access_admin: none (only room creator has owner privileges)
- {mod_muc, [{access, muc},
- {access_create, muc},
- {access_admin, muc_admin}]},
- {mod_pubsub, []},
- {mod_time, []},
- {mod_last, []},
- {mod_version, []}
- ]}.
-
-
-% Local Variables:
-% mode: erlang
-% End:
+% $Id$\r
+\r
+%override_acls.\r
+\r
+\r
+% Users that have admin access. Add line like one of the following after you\r
+% will be successfully registered on server to get admin access:\r
+%{acl, admin, {user, "aleksey"}}.\r
+%{acl, admin, {user, "ermine"}}.\r
+\r
+% Blocked users:\r
+%{acl, blocked, {user, "test"}}.\r
+\r
+% Local users:\r
+{acl, local, {user_regexp, ""}}.\r
+\r
+% Another examples of ACLs:\r
+%{acl, jabberorg, {server, "jabber.org"}}.\r
+%{acl, aleksey, {user, "aleksey", "jabber.ru"}}.\r
+%{acl, test, {user_regexp, "^test"}}.\r
+%{acl, test, {user_glob, "test*"}}.\r
+\r
+\r
+% Only admins can use configuration interface:\r
+{access, configure, [{allow, admin}]}.\r
+\r
+% Every username can be registered via in-band registration:\r
+{access, register, [{allow, all}]}.\r
+\r
+% After successful registration user will get message with following subject\r
+% and body:\r
+{welcome_message,\r
+ {"Welcome!",\r
+ "Welcome to Jabber Service. "\r
+ "For information about Jabber visit http://jabber.org"}}.\r
+% Replace them with 'none' if you don't want to send such message:\r
+%{welcome_message, none}.\r
+\r
+% List of people who will get notifications about registered users\r
+%{registration_watchers, ["admin1@localhost",\r
+% "admin2@localhost"]}.\r
+\r
+% Only admins can send announcement messages:\r
+{access, announce, [{allow, admin}]}.\r
+\r
+\r
+% Only non-blocked users can use c2s connections:\r
+{access, c2s, [{deny, blocked},\r
+ {allow, all}]}.\r
+\r
+% Set shaper with name "normal" to limit traffic speed to 1000B/s\r
+{shaper, normal, {maxrate, 1000}}.\r
+\r
+% Set shaper with name "fast" to limit traffic speed to 50000B/s\r
+{shaper, fast, {maxrate, 50000}}.\r
+\r
+% For all users except admins used "normal" shaper\r
+{access, c2s_shaper, [{none, admin},\r
+ {normal, all}]}.\r
+\r
+% For all S2S connections used "fast" shaper\r
+{access, s2s_shaper, [{fast, all}]}.\r
+\r
+% Admins of this server are also admins of MUC service:\r
+{access, muc_admin, [{allow, admin}]}.\r
+\r
+% All users are allowed to use MUC service:\r
+{access, muc, [{allow, all}]}.\r
+\r
+% This rule allows access only for local users:\r
+{access, local, [{allow, local}]}.\r
+\r
+\r
+% Authentification method. If you want to use internal user base, then use\r
+% this line:\r
+{auth_method, internal}.\r
+\r
+% For LDAP authentification use these lines instead of above one:\r
+%{auth_method, ldap}.\r
+%{ldap_servers, ["localhost"]}. % List of LDAP servers\r
+%{ldap_uidattr, "uid"}. % LDAP attribute that holds user ID\r
+%{ldap_base, "dc=example,dc=com"}. % Base of LDAP directory\r
+\r
+% For authentification via external script use the following:\r
+%{auth_method, external}.\r
+%{extauth_program, "/path/to/authentification/script"}.\r
+\r
+\r
+% Host name(s):\r
+{hosts, ["localhost"]}.\r
+\r
+% Default language:\r
+{language, "en"}.\r
+\r
+% Listened ports:\r
+{listen,\r
+ [\r
+ {5222, ejabberd_c2s, [{access, c2s},\r
+ {shaper, c2s_shaper}]},\r
+\r
+% To create selfsigned certificate run the following command from the\r
+% command prompt:\r
+%\r
+% openssl req -new -x509 -days 365 -nodes -out ejabberd.pem -keyout ejabberd.pem\r
+%\r
+% and answer the questions.\r
+% {5222, ejabberd_c2s, [{access, c2s},\r
+% starttls, {certfile, "./ejabberd.pem"},\r
+% {shaper, c2s_shaper}]},\r
+\r
+% When using SSL/TLS ssl option is not recommended (it requires patching\r
+% erlang ssl application). Use tls option instead (as shown below).\r
+% {5223, ejabberd_c2s, [{access, c2s},\r
+% tls, {certfile, "./ejabberd.pem"},\r
+% {shaper, c2s_shaper}]},\r
+\r
+ {5269, ejabberd_s2s_in, [{shaper, s2s_shaper}]},\r
+\r
+% {5555, ejabberd_service, [{access, all},\r
+% {host, "icq.localhost", [{password, "secret"}]}]},\r
+\r
+ {5280, ejabberd_http, [http_poll, web_admin]}\r
+ ]}.\r
+\r
+% If SRV lookup fails, then port 5269 is used to communicate with remote server\r
+{outgoing_s2s_port, 5269}.\r
+\r
+\r
+% Used modules:\r
+{modules,\r
+ [\r
+ {mod_register, [{access, register}]},\r
+ {mod_roster, []},\r
+ {mod_shared_roster, []},\r
+ {mod_privacy, []},\r
+ {mod_configure, []},\r
+ {mod_disco, []},\r
+ {mod_stats, []},\r
+ {mod_vcard, []},\r
+ {mod_offline, []},\r
+ {mod_announce, [{access, announce}]},\r
+ {mod_private, []},\r
+ {mod_irc, []},\r
+% Default options for mod_muc:\r
+% host: "conference." ++ ?MYNAME\r
+% access: all\r
+% access_create: all\r
+% access_admin: none (only room creator has owner privileges)\r
+ {mod_muc, [{access, muc},\r
+ {access_create, muc},\r
+ {access_admin, muc_admin}]},\r
+ {mod_pubsub, []},\r
+ {mod_time, []},\r
+ {mod_last, []},\r
+ {mod_version, []}\r
+ ]}.\r
+\r
+\r
+% Local Variables:\r
+% mode: erlang\r
+% End:\r
projects / ejabberd / commitdiff