This reverts commit
16304a013432931e61e623c8d85e9fe24709d9ba, except
for its changes in src/port/snprintf.c; as well as commit
cac18a76bb6b08f1ecc2a85e46c9d2ab82dd9d23 which is no longer needed.
Fujii Masao reported that the previous commit caused failures in psql on
OS X, since if one exits the pager program early while viewing a query
result, psql sees an EPIPE error from fprintf --- and the wrapper function
thought that was reason to panic. (It's a bit surprising that the same
does not happen on Linux.) Further discussion among the security list
concluded that the risk of other such failures was far too great, and
that the one-size-fits-all approach to error handling embodied in the
previous patch is unlikely to be workable.
This leaves us again exposed to the possibility of the type of failure
envisioned in CVE-2015-3166. However, that failure mode is strictly
hypothetical at this point: there is no concrete reason to believe that
an attacker could trigger information disclosure through the supposed
mechanism. In the first place, the attack surface is fairly limited,
since so much of what the backend does with format strings goes through
stringinfo.c or psprintf(), and those already had adequate defenses.
In the second place, even granting that an unprivileged attacker could
control the occurrence of ENOMEM with some precision, it's a stretch to
believe that he could induce it just where the target buffer contains some
valuable information. So we concluded that the risk of non-hypothetical
problems induced by the patch greatly outweighs the security risks.
We will therefore revert, and instead undertake closer analysis to
identify specific calls that may need hardening, rather than attempt a
universal solution.
We have kept the portion of the previous patch that improved snprintf.c's
handling of errors when it calls the platform's sprintf(). That seems to
be an unalloyed improvement.
Security: CVE-2015-3166
extern unsigned char pg_toupper(unsigned char ch);
extern unsigned char pg_tolower(unsigned char ch);
+#ifdef USE_REPL_SNPRINTF
+
/*
- * Capture macro-compatible calls to printf() and friends, and redirect them
- * to wrappers that throw errors in lieu of reporting failure in a return
- * value. Versions of libintl >= 0.13 similarly redirect to versions that
- * understand the %$ format, so disable libintl macros first.
+ * Versions of libintl >= 0.13 try to replace printf() and friends with
+ * macros to their own versions that understand the %$ format. We do the
+ * same, so disable their macros, if they exist.
*/
#ifdef vsnprintf
#undef vsnprintf
#ifdef snprintf
#undef snprintf
#endif
-#ifdef vsprintf
-#undef vsprintf
-#endif
#ifdef sprintf
#undef sprintf
#endif
#undef printf
#endif
-extern int
-vsnprintf_throw_on_fail(char *str, size_t count, const char *fmt, va_list args)
-__attribute__((format(printf, 3, 0)));
-extern int
-snprintf_throw_on_fail(char *str, size_t count, const char *fmt,...)
-__attribute__((format(printf, 3, 4)));
-extern int
-vsprintf_throw_on_fail(char *str, const char *fmt, va_list args)
-__attribute__((format(printf, 2, 0)));
-extern int
-sprintf_throw_on_fail(char *str, const char *fmt,...)
-__attribute__((format(printf, 2, 3)));
-extern int
-vfprintf_throw_on_fail(FILE *stream, const char *fmt, va_list args)
-__attribute__((format(printf, 2, 0)));
-extern int
-fprintf_throw_on_fail(FILE *stream, const char *fmt,...)
-__attribute__((format(printf, 2, 3)));
-extern int
-printf_throw_on_fail(const char *fmt,...)
-__attribute__((format(printf, 1, 2)));
-
-/*
- * The GCC-specific code below prevents the __attribute__(... 'printf')
- * above from being replaced, and this is required because gcc doesn't
- * know anything about printf_throw_on_fail.
- */
-#ifdef __GNUC__
-#define vsnprintf(...) vsnprintf_throw_on_fail(__VA_ARGS__)
-#define snprintf(...) snprintf_throw_on_fail(__VA_ARGS__)
-#define vsprintf(...) vsprintf_throw_on_fail(__VA_ARGS__)
-#define sprintf(...) sprintf_throw_on_fail(__VA_ARGS__)
-#define vfprintf(...) vfprintf_throw_on_fail(__VA_ARGS__)
-#define fprintf(...) fprintf_throw_on_fail(__VA_ARGS__)
-#define printf(...) printf_throw_on_fail(__VA_ARGS__)
-#else
-#define vsnprintf vsnprintf_throw_on_fail
-#define snprintf snprintf_throw_on_fail
-#define vsprintf vsprintf_throw_on_fail
-#define sprintf sprintf_throw_on_fail
-#define vfprintf vfprintf_throw_on_fail
-#define fprintf fprintf_throw_on_fail
-#define printf printf_throw_on_fail
-#endif
-
-#ifdef USE_REPL_SNPRINTF
-
-/* Code outside syswrap.c should not call these. */
-
extern int pg_vsnprintf(char *str, size_t count, const char *fmt, va_list args);
extern int
pg_snprintf(char *str, size_t count, const char *fmt,...)
/* This extension allows gcc to check the format string */
__attribute__((format(printf, 3, 4)));
-extern int pg_vsprintf(char *str, const char *fmt, va_list args);
extern int
pg_sprintf(char *str, const char *fmt,...)
/* This extension allows gcc to check the format string */
/* This extension allows gcc to check the format string */
__attribute__((format(printf, 1, 2)));
+/*
+ * The GCC-specific code below prevents the __attribute__(... 'printf')
+ * above from being replaced, and this is required because gcc doesn't
+ * know anything about pg_printf.
+ */
+#ifdef __GNUC__
+#define vsnprintf(...) pg_vsnprintf(__VA_ARGS__)
+#define snprintf(...) pg_snprintf(__VA_ARGS__)
+#define sprintf(...) pg_sprintf(__VA_ARGS__)
+#define vfprintf(...) pg_vfprintf(__VA_ARGS__)
+#define fprintf(...) pg_fprintf(__VA_ARGS__)
+#define printf(...) pg_printf(__VA_ARGS__)
+#else
+#define vsnprintf pg_vsnprintf
+#define snprintf pg_snprintf
+#define sprintf pg_sprintf
+#define vfprintf pg_vfprintf
+#define fprintf pg_fprintf
+#define printf pg_printf
+#endif
#endif /* USE_REPL_SNPRINTF */
/*
# Shared library stuff
include $(top_srcdir)/src/Makefile.shlib
-# XXX This library uses no symbols from snprintf.c.
snprintf.c: % : $(top_srcdir)/src/port/%
rm -f $@ && $(LN_S) $< .
/path.c
/pgstrcasecmp.c
/strlcpy.c
-/syswrap.c
/thread.c
LIBS := $(filter-out -lpgport, $(LIBS))
OBJS= execute.o typename.o descriptor.o sqlda.o data.o error.o prepare.o memory.o \
- connect.o misc.o path.o pgstrcasecmp.o syswrap.o \
+ connect.o misc.o path.o pgstrcasecmp.o \
$(filter snprintf.o strlcpy.o isinf.o, $(LIBOBJS))
# thread.c is needed only for non-WIN32 implementation of path.c
# necessarily use the same object files as the backend uses. Instead,
# symlink the source files in here and build our own object file.
-path.c pgstrcasecmp.c snprintf.c strlcpy.c syswrap.c thread.c isinf.c: % : $(top_srcdir)/src/port/%
+path.c pgstrcasecmp.c snprintf.c strlcpy.c thread.c isinf.c: % : $(top_srcdir)/src/port/%
rm -f $@ && $(LN_S) $< .
misc.o: misc.c $(top_builddir)/src/port/pg_config_paths.h
clean distclean: clean-lib
rm -f $(OBJS)
- rm -f path.c pgstrcasecmp.c snprintf.c strlcpy.c syswrap.c thread.c
+ rm -f path.c pgstrcasecmp.c snprintf.c strlcpy.c thread.c
maintainer-clean: distclean maintainer-clean-lib
/exports.list
/pgstrcasecmp.c
-/syswrap.c
SHLIB_EXPORTS = exports.txt
OBJS= numeric.o datetime.o common.o dt_common.o timestamp.o interval.o \
- pgstrcasecmp.o syswrap.o \
+ pgstrcasecmp.o \
$(filter rint.o snprintf.o, $(LIBOBJS))
all: all-lib
# necessarily use the same object files as the backend uses. Instead,
# symlink the source files in here and build our own object file.
-pgstrcasecmp.c rint.c snprintf.c syswrap.c: % : $(top_srcdir)/src/port/%
+pgstrcasecmp.c rint.c snprintf.c: % : $(top_srcdir)/src/port/%
rm -f $@ && $(LN_S) $< .
install: all installdirs install-lib
uninstall: uninstall-lib
clean distclean: clean-lib
- rm -f $(OBJS) pgstrcasecmp.c rint.c snprintf.c syswrap.c
+ rm -f $(OBJS) pgstrcasecmp.c rint.c snprintf.c
maintainer-clean: distclean maintainer-clean-lib
/snprintf.c
/strerror.c
/strlcpy.c
-/syswrap.c
/thread.c
/win32error.c
/pgsleep.c
OBJS= fe-auth.o fe-connect.o fe-exec.o fe-misc.o fe-print.o fe-lobj.o \
fe-protocol2.o fe-protocol3.o pqexpbuffer.o pqsignal.o fe-secure.o \
libpq-events.o \
- md5.o ip.o wchar.o encnames.o noblock.o pgstrcasecmp.o syswrap.o thread.o \
+ md5.o ip.o wchar.o encnames.o noblock.o pgstrcasecmp.o thread.o \
$(filter crypt.o getaddrinfo.o inet_aton.o open.o snprintf.o strerror.o strlcpy.o win32error.o, $(LIBOBJS))
ifeq ($(PORTNAME), cygwin)
# For port modules, this only happens if configure decides the module
# is needed (see filter hack in OBJS, above).
-crypt.c getaddrinfo.c inet_aton.c noblock.c open.c pgstrcasecmp.c snprintf.c strerror.c strlcpy.c syswrap.c thread.c win32error.c pgsleep.c: % : $(top_srcdir)/src/port/%
+crypt.c getaddrinfo.c inet_aton.c noblock.c open.c pgstrcasecmp.c snprintf.c strerror.c strlcpy.c thread.c win32error.c pgsleep.c: % : $(top_srcdir)/src/port/%
rm -f $@ && $(LN_S) $< .
md5.c ip.c: % : $(backend_src)/libpq/%
endif
clean distclean: clean-lib
- rm -f $(OBJS) pg_config_paths.h crypt.c getaddrinfo.c inet_aton.c noblock.c open.c pgstrcasecmp.c snprintf.c strerror.c strlcpy.c syswrap.c thread.c md5.c ip.c encnames.c wchar.c win32error.c pgsleep.c pthread.h libpq.rc
+ rm -f $(OBJS) pg_config_paths.h crypt.c getaddrinfo.c inet_aton.c noblock.c open.c pgstrcasecmp.c snprintf.c strerror.c strlcpy.c thread.c md5.c ip.c encnames.c wchar.c win32error.c pgsleep.c pthread.h libpq.rc
# Might be left over from a Win32 client-only build
rm -f pg_config_paths.h
-@erase "$(INTDIR)\dirmod.obj"
-@erase "$(INTDIR)\pgsleep.obj"
-@erase "$(INTDIR)\open.obj"
- -@erase "$(INTDIR)\syswrap.obj"
-@erase "$(INTDIR)\win32error.obj"
-@erase "$(OUTDIR)\$(OUTFILENAME).lib"
-@erase "$(OUTDIR)\$(OUTFILENAME)dll.lib"
"$(INTDIR)\dirmod.obj" \
"$(INTDIR)\pgsleep.obj" \
"$(INTDIR)\open.obj" \
- "$(INTDIR)\syswrap.obj" \
"$(INTDIR)\win32error.obj" \
"$(INTDIR)\pthread-win32.obj"
$(CPP_PROJ) /I"." ..\..\port\open.c
<<
-"$(INTDIR)\syswrap.obj" : ..\..\port\syswrap.c
- $(CPP) @<<
- $(CPP_PROJ) ..\..\port\syswrap.c
-<<
-
"$(INTDIR)\win32error.obj" : ..\..\port\win32error.c
$(CPP) @<<
$(CPP_PROJ) /I"." ..\..\port\win32error.c
-@erase "$(INTDIR)\dirmod.obj"
-@erase "$(INTDIR)\pgsleep.obj"
-@erase "$(INTDIR)\open.obj"
- -@erase "$(INTDIR)\syswrap.obj"
-@erase "$(INTDIR)\win32error.obj"
-@erase "$(OUTDIR)\$(OUTFILENAME).lib"
-@erase "$(OUTDIR)\$(OUTFILENAME)dll.lib"
"$(INTDIR)\dirmod.obj" \
"$(INTDIR)\pgsleep.obj" \
"$(INTDIR)\open.obj" \
- "$(INTDIR)\syswrap.obj" \
"$(INTDIR)\win32error.obj" \
"$(INTDIR)\pthread-win32.obj"
$(CPP_PROJ) /I"." ..\..\port\open.c
<<
-"$(INTDIR)\syswrap.obj" : ..\..\port\syswrap.c
- $(CPP) @<<
- $(CPP_PROJ) ..\..\port\syswrap.c
-<<
-
"$(INTDIR)\win32error.obj" : ..\..\port\win32error.c
$(CPP) @<<
$(CPP_PROJ) /I"." ..\..\port\win32error.c
LIBS += $(PTHREAD_LIBS)
OBJS = $(LIBOBJS) chklocale.o dirmod.o exec.o noblock.o path.o \
- pgsleep.o pgstrcasecmp.o qsort.o qsort_arg.o sprompt.o syswrap.o thread.o
+ pgsleep.o pgstrcasecmp.o qsort.o qsort_arg.o sprompt.o thread.o
ifneq (,$(filter $(PORTNAME),cygwin win32))
OBJS += pipe.o
endif
/* Prevent recursion */
#undef vsnprintf
#undef snprintf
-#undef vsprintf
#undef sprintf
#undef vfprintf
#undef fprintf
return len;
}
-int
+static int
pg_vsprintf(char *str, const char *fmt, va_list args)
{
PrintfTarget target;
+++ /dev/null
-/*-------------------------------------------------------------------------
- *
- * syswrap.c
- * error-throwing wrappers around POSIX functions that rarely fail
- *
- * Portions Copyright (c) 1996-2015, PostgreSQL Global Development Group
- *
- *
- * IDENTIFICATION
- * src/port/syswrap.c
- *
- *-------------------------------------------------------------------------
- */
-
-#ifndef FRONTEND
-#include "postgres.h"
-#else
-#include "postgres_fe.h"
-#endif
-
-/* Prevent recursion */
-#undef vsnprintf
-#undef snprintf
-#undef vsprintf
-#undef sprintf
-#undef vfprintf
-#undef fprintf
-#undef printf
-
-/* When the libc primitives are lacking, use our own. */
-#ifdef USE_REPL_SNPRINTF
-#ifdef __GNUC__
-#define vsnprintf(...) pg_vsnprintf(__VA_ARGS__)
-#define snprintf(...) pg_snprintf(__VA_ARGS__)
-#define vsprintf(...) pg_vsprintf(__VA_ARGS__)
-#define sprintf(...) pg_sprintf(__VA_ARGS__)
-#define vfprintf(...) pg_vfprintf(__VA_ARGS__)
-#define fprintf(...) pg_fprintf(__VA_ARGS__)
-#define printf(...) pg_printf(__VA_ARGS__)
-#else
-#define vsnprintf pg_vsnprintf
-#define snprintf pg_snprintf
-#define vsprintf pg_vsprintf
-#define sprintf pg_sprintf
-#define vfprintf pg_vfprintf
-#define fprintf pg_fprintf
-#define printf pg_printf
-#endif
-#endif /* USE_REPL_SNPRINTF */
-
-/*
- * We abort() in the frontend, rather than exit(), because libpq in particular
- * has no business calling exit(). These failures had better be rare.
- */
-#ifdef FRONTEND
-#define LIB_ERR(func) \
-do { \
- int discard = fprintf(stderr, "%s failed: %s\n", func, strerror(errno)); \
- (void) discard; \
- abort(); \
-} while (0)
-#else
-#define LIB_ERR(func) elog(ERROR, "%s failed: %m", func)
-#endif
-
-int
-vsnprintf_throw_on_fail(char *str, size_t count, const char *fmt, va_list args)
-{
- int save_errno;
- int ret;
-
- /*
- * On HP-UX B.11.31, a call that truncates output returns -1 without
- * setting errno. (SUSv2 allowed this until the approval of Base Working
- * Group Resolution BWG98-006.) We could avoid the save and restore of
- * errno on most platforms.
- */
- save_errno = errno;
- errno = 0;
- ret = vsnprintf(str, count, fmt, args);
- if (ret < 0 && errno != 0)
- LIB_ERR("vsnprintf");
- errno = save_errno;
- return ret;
-}
-
-int
-snprintf_throw_on_fail(char *str, size_t count, const char *fmt,...)
-{
- int ret;
- va_list args;
-
- va_start(args, fmt);
- ret = vsnprintf_throw_on_fail(str, count, fmt, args);
- va_end(args);
- return ret;
-}
-
-int
-vsprintf_throw_on_fail(char *str, const char *fmt, va_list args)
-{
- int ret;
-
- ret = vsprintf(str, fmt, args);
- if (ret < 0)
- LIB_ERR("vsprintf");
- return ret;
-}
-
-int
-sprintf_throw_on_fail(char *str, const char *fmt,...)
-{
- int ret;
- va_list args;
-
- va_start(args, fmt);
- ret = vsprintf_throw_on_fail(str, fmt, args);
- va_end(args);
- return ret;
-}
-
-int
-vfprintf_throw_on_fail(FILE *stream, const char *fmt, va_list args)
-{
- int ret;
-
- ret = vfprintf(stream, fmt, args);
- if (ret < 0)
- LIB_ERR("vfprintf");
- return ret;
-}
-
-int
-fprintf_throw_on_fail(FILE *stream, const char *fmt,...)
-{
- int ret;
- va_list args;
-
- va_start(args, fmt);
- ret = vfprintf_throw_on_fail(stream, fmt, args);
- va_end(args);
- return ret;
-}
-
-int
-printf_throw_on_fail(const char *fmt,...)
-{
- int ret;
- va_list args;
-
- va_start(args, fmt);
- ret = vfprintf_throw_on_fail(stdout, fmt, args);
- va_end(args);
- return ret;
-}
chklocale.c crypt.c fseeko.c getrusage.c inet_aton.c random.c srandom.c
getaddrinfo.c gettimeofday.c kill.c open.c erand48.c mkdtemp.c
snprintf.c strlcat.c strlcpy.c dirmod.c exec.c noblock.c path.c pipe.c
- pgsleep.c pgstrcasecmp.c qsort.c qsort_arg.c sprompt.c syswrap.c thread.c
+ pgsleep.c pgstrcasecmp.c qsort.c qsort_arg.c sprompt.c thread.c
getopt.c getopt_long.c dirent.c rint.c win32env.c win32error.c);
$libpgport = $solution->AddProject('libpgport','lib','misc');
projects / postgresql / commitdiff