res = curl_easy_perform(curl_handle);
if(CURLE_OK == res) {
- double val;
+ curl_off_t val;
/* check for bytes downloaded */
- res = curl_easy_getinfo(curl_handle, CURLINFO_SIZE_DOWNLOAD, &val);
+ res = curl_easy_getinfo(curl_handle, CURLINFO_SIZE_DOWNLOAD_T, &val);
if((CURLE_OK == res) && (val>0))
- printf("Data downloaded: %0.0f bytes.\n", val);
+ printf("Data downloaded: %" CURL_FORMAT_CURL_OFF_T " bytes.\n", val);
/* check for total download time */
- res = curl_easy_getinfo(curl_handle, CURLINFO_TOTAL_TIME, &val);
+ res = curl_easy_getinfo(curl_handle, CURLINFO_TOTAL_TIME_T, &val);
if((CURLE_OK == res) && (val>0))
- printf("Total download time: %0.3f sec.\n", val);
+ printf("Total download time: %" CURL_FORMAT_CURL_OFF_T ".%06ld sec.\n",
+ (val / 1000000), (long)(val % 1000000));
/* check for average download speed */
- res = curl_easy_getinfo(curl_handle, CURLINFO_SPEED_DOWNLOAD, &val);
+ res = curl_easy_getinfo(curl_handle, CURLINFO_SPEED_DOWNLOAD_T, &val);
if((CURLE_OK == res) && (val>0))
- printf("Average download speed: %0.3f kbyte/sec.\n", val / 1024);
+ printf("Average download speed: %" CURL_FORMAT_CURL_OFF_T
+ " kbyte/sec.\n", val / 1024);
if(prtall) {
/* check for name resolution time */
- res = curl_easy_getinfo(curl_handle, CURLINFO_NAMELOOKUP_TIME, &val);
+ res = curl_easy_getinfo(curl_handle, CURLINFO_NAMELOOKUP_TIME_T, &val);
if((CURLE_OK == res) && (val>0))
- printf("Name lookup time: %0.3f sec.\n", val);
+ printf("Name lookup time: %" CURL_FORMAT_CURL_OFF_T ".%06ld sec.\n",
+ (val / 1000000), (long)(val % 1000000));
/* check for connect time */
- res = curl_easy_getinfo(curl_handle, CURLINFO_CONNECT_TIME, &val);
+ res = curl_easy_getinfo(curl_handle, CURLINFO_CONNECT_TIME_T, &val);
if((CURLE_OK == res) && (val>0))
- printf("Connect time: %0.3f sec.\n", val);
+ printf("Connect time: %" CURL_FORMAT_CURL_OFF_T ".%06ld sec.\n",
+ (val / 1000000), (long)(val % 1000000));
}
}
else {
CURL *curl;
CURLcode res;
struct stat file_info;
- double speed_upload, total_time;
+ curl_off_t speed_upload, total_time;
FILE *fd;
fd = fopen("debugit", "rb"); /* open file to upload */
}
else {
/* now extract transfer info */
- curl_easy_getinfo(curl, CURLINFO_SPEED_UPLOAD, &speed_upload);
- curl_easy_getinfo(curl, CURLINFO_TOTAL_TIME, &total_time);
+ curl_easy_getinfo(curl, CURLINFO_SPEED_UPLOAD_T, &speed_upload);
+ curl_easy_getinfo(curl, CURLINFO_TOTAL_TIME_T, &total_time);
- fprintf(stderr, "Speed: %.3f bytes/sec during %.3f seconds\n",
- speed_upload, total_time);
+ fprintf(stderr, "Speed: %" CURL_FORMAT_CURL_OFF_T " bytes/sec during %"
+ CURL_FORMAT_CURL_OFF_T ".%06ld seconds\n",
+ speed_upload,
+ (total_time / 1000000), (long)(total_time % 1000000));
}
/* always cleanup */
#include <curl/curl.h>
#define STOP_DOWNLOAD_AFTER_THIS_MANY_BYTES 6000
-#define MINIMAL_PROGRESS_FUNCTIONALITY_INTERVAL 3
+#define MINIMAL_PROGRESS_FUNCTIONALITY_INTERVAL 3000000
struct myprogress {
- double lastruntime;
+ curl_off_t lastruntime;
CURL *curl;
};
{
struct myprogress *myp = (struct myprogress *)p;
CURL *curl = myp->curl;
- double curtime = 0;
+ curl_off_t curtime = 0;
- curl_easy_getinfo(curl, CURLINFO_TOTAL_TIME, &curtime);
+ curl_easy_getinfo(curl, CURLINFO_TOTAL_TIME_T, &curtime);
/* under certain circumstances it may be desirable for certain functionality
to only run every N seconds, in order to do this the transaction time can
be used */
if((curtime - myp->lastruntime) >= MINIMAL_PROGRESS_FUNCTIONALITY_INTERVAL) {
myp->lastruntime = curtime;
- fprintf(stderr, "TOTAL TIME: %f \r\n", curtime);
+ fprintf(stderr, "TOTAL TIME: %" CURL_FORMAT_CURL_OFF_T ".%06ld\r\n",
+ (curtime / 1000000), (long)(curtime % 1000000));
}
fprintf(stderr, "UP: %" CURL_FORMAT_CURL_OFF_T " of %" CURL_FORMAT_CURL_OFF_T
.IP CURLINFO_TOTAL_TIME
Total time of previous transfer.
See \fICURLINFO_TOTAL_TIME(3)\fP
+.IP CURLINFO_TOTAL_TIME_T
+Total time of previous transfer.
+See \fICURLINFO_TOTAL_TIME_T(3)\fP
.IP CURLINFO_NAMELOOKUP_TIME
Time from start until name resolving completed.
See \fICURLINFO_NAMELOOKUP_TIME(3)\fP
+.IP CURLINFO_NAMELOOKUP_TIME_T
+Time from start until name resolving completed.
+See \fICURLINFO_NAMELOOKUP_TIME_T(3)\fP
.IP CURLINFO_CONNECT_TIME
Time from start until remote host or proxy completed.
See \fICURLINFO_CONNECT_TIME(3)\fP
+.IP CURLINFO_CONNECT_TIME_T
+Time from start until remote host or proxy completed.
+See \fICURLINFO_CONNECT_TIME_T(3)\fP
.IP CURLINFO_APPCONNECT_TIME
Time from start until SSL/SSH handshake completed.
See \fICURLINFO_APPCONNECT_TIME(3)\fP
+.IP CURLINFO_APPCONNECT_TIME_T
+Time from start until SSL/SSH handshake completed.
+See \fICURLINFO_APPCONNECT_TIME_T(3)\fP
.IP CURLINFO_PRETRANSFER_TIME
Time from start until just before the transfer begins.
See \fICURLINFO_PRETRANSFER_TIME(3)\fP
+.IP CURLINFO_PRETRANSFER_TIME_T
+Time from start until just before the transfer begins.
+See \fICURLINFO_PRETRANSFER_TIME_T(3)\fP
.IP CURLINFO_STARTTRANSFER_TIME
Time from start until just when the first byte is received.
See \fICURLINFO_STARTTRANSFER_TIME(3)\fP
+.IP CURLINFO_STARTTRANSFER_TIME_T
+Time from start until just when the first byte is received.
+See \fICURLINFO_STARTTRANSFER_TIME_T(3)\fP
.IP CURLINFO_REDIRECT_TIME
Time taken for all redirect steps before the final transfer.
See \fICURLINFO_REDIRECT_TIME(3)\fP
+.IP CURLINFO_REDIRECT_TIME_T
+Time taken for all redirect steps before the final transfer.
+See \fICURLINFO_REDIRECT_TIME_T(3)\fP
.IP CURLINFO_REDIRECT_COUNT
Total number of redirects that were followed.
See \fICURLINFO_REDIRECT_COUNT(3)\fP
|--|--|--|--|--|--REDIRECT
.fi
.IP NAMELOOKUP
-\fICURLINFO_NAMELOOKUP_TIME\fP. The time it took from the start until the name
-resolving was completed.
+\fICURLINFO_NAMELOOKUP_TIME\fP and \fIfICURLINFO_NAMELOOKUP_TIME_T\fP.
+The time it took from the start until the name resolving was completed.
.IP CONNECT
-\fICURLINFO_CONNECT_TIME\fP. The time it took from the start until the connect
+\fICURLINFO_CONNECT_TIME\fP and \fICURLINFO_CONNECT_TIME_T\fP.
+The time it took from the start until the connect
to the remote host (or proxy) was completed.
.IP APPCONNECT
-\fICURLINFO_APPCONNECT_TIME\fP. The time it took from the start until the SSL
-connect/handshake with the remote host was completed. (Added in in 7.19.0)
+\fICURLINFO_APPCONNECT_TIME\fP and \fICURLINFO_APPCONNECT_TIME_T\fP.
+The time it took from the start until the SSL
+connect/handshake with the remote host was completed. (Added in 7.19.0)
+The latter is the integer version (measuring microseconds). (Added in 7.60.0)
.IP PRETRANSFER
-\fICURLINFO_PRETRANSFER_TIME\fP. The time it took from the start until the
+\fICURLINFO_PRETRANSFER_TIME\fP and \fICURLINFO_PRETRANSFER_TIME_T\fP.
+The time it took from the start until the
file transfer is just about to begin. This includes all pre-transfer commands
and negotiations that are specific to the particular protocol(s) involved.
.IP STARTTRANSFER
-\fICURLINFO_STARTTRANSFER_TIME\fP. The time it took from the start until the
+\fICURLINFO_STARTTRANSFER_TIME\fP and \fICURLINFO_STARTTRANSFER_TIME_T\fP.
+The time it took from the start until the
first byte is received by libcurl.
.IP TOTAL
-\fICURLINFO_TOTAL_TIME\fP. Total time of the previous request.
+\fICURLINFO_TOTAL_TIME\fP and \fICURLINFO_TOTAL_TIME_T\fP.
+Total time of the previous request.
.IP REDIRECT
-\fICURLINFO_REDIRECT_TIME\fP. The time it took for all redirection steps
+\fICURLINFO_REDIRECT_TIME\fP and \fICURLINFO_REDIRECT_TIME_T\fP.
+The time it took for all redirection steps
include name lookup, connect, pretransfer and transfer before final
transaction was started. So, this is zero if no redirection took place.
.SH RETURN VALUE
.SH RETURN VALUE
Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
.SH "SEE ALSO"
-.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), "
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_APPCONNECT_TIME_T "(3)"
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 2018, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at https://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLINFO_APPCONNECT_TIME_T 3 "28 Apr 2018" "libcurl 7.61.0" "curl_easy_getinfo options"
+.SH NAME
+CURLINFO_APPCONNECT_TIME_T \- get the time until the SSL/SSH handshake is completed
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_APPCONNECT_TIME_T, curl_off_t *timep);
+.SH DESCRIPTION
+Pass a pointer to a curl_off_t to receive the time, in microseconds,
+it took from the
+start until the SSL/SSH connect/handshake to the remote host was completed.
+This time is most often very near to the \fICURLINFO_PRETRANSFER_TIME_T(3)\fP
+time, except for cases such as HTTP pipelining where the pretransfer time can
+be delayed due to waits in line for the pipeline and more.
+
+See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page.
+.SH PROTOCOLS
+All
+.SH EXAMPLE
+.nf
+curl = curl_easy_init();
+if(curl) {
+ curl_off_t connect;
+ curl_easy_setopt(curl, CURLOPT_URL, url);
+ res = curl_easy_perform(curl);
+ if(CURLE_OK == res) {
+ res = curl_easy_getinfo(curl, CURLINFO_APPCONNECT_TIME_T, &connect);
+ if(CURLE_OK == res) {
+ printf("Time: %" CURL_FORMAT_CURL_OFF_T ".%06ld", connect / 1000000,
+ (long)(connect % 1000000));
+ }
+ }
+ /* always cleanup */
+ curl_easy_cleanup(curl);
+}
+.fi
+.SH AVAILABILITY
+Added in 7.61.0
+.SH RETURN VALUE
+Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_APPCONNECT_TIME "(3)"
.SH RETURN VALUE
Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
.SH "SEE ALSO"
-.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), "
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_CONNECT_TIME_T "(3)"
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 2018, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at https://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLINFO_CONNECT_TIME_T 3 "28 Apr 2018" "libcurl 7.61.0" "curl_easy_getinfo options"
+.SH NAME
+CURLINFO_CONNECT_TIME_T \- get the time until connect
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_CONNECT_TIME_T, curl_off_t *timep);
+.SH DESCRIPTION
+Pass a pointer to a curl_off_t to receive the total time in microseconds
+from the start until the connection to the remote host (or proxy) was completed.
+See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page.
+.SH PROTOCOLS
+All
+.SH EXAMPLE
+.nf
+curl = curl_easy_init();
+if(curl) {
+ curl_off_t connect;
+ curl_easy_setopt(curl, CURLOPT_URL, url);
+ res = curl_easy_perform(curl);
+ if(CURLE_OK == res) {
+ res = curl_easy_getinfo(curl, CURLINFO_CONNECT_TIME_T, &connect);
+ if(CURLE_OK == res) {
+ printf("Time: %" CURL_FORMAT_CURL_OFF_T ".%06ld", connect / 1000000,
+ (long)(connect % 1000000));
+ }
+ }
+ /* always cleanup */
+ curl_easy_cleanup(curl);
+}
+.fi
+.SH AVAILABILITY
+Added in 7.61.0
+.SH RETURN VALUE
+Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_CONNECT_TIME "(3)"
.SH RETURN VALUE
Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
.SH "SEE ALSO"
-.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), "
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_NAMELOOKUP_TIME_T "(3)"
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 2018, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at https://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLINFO_NAMELOOKUP_TIME_T 3 "28 Apr 2018" "libcurl 7.61.0" "curl_easy_getinfo options"
+.SH NAME
+CURLINFO_NAMELOOKUP_TIME_T \- get the name lookup time in microseconds
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_NAMELOOKUP_TIME_T, curl_off_t *timep);
+.SH DESCRIPTION
+Pass a pointer to a curl_off_t to receive the total time in microseconds
+from the start until the name resolving was completed.
+
+See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page.
+.SH PROTOCOLS
+All
+.SH EXAMPLE
+.nf
+curl = curl_easy_init();
+if(curl) {
+ curl_off_t namelookup;
+ curl_easy_setopt(curl, CURLOPT_URL, url);
+ res = curl_easy_perform(curl);
+ if(CURLE_OK == res) {
+ res = curl_easy_getinfo(curl, CURLINFO_NAMELOOKUP_TIME_T, &namelookup);
+ if(CURLE_OK == res) {
+ printf("Time: %" CURL_FORMAT_CURL_OFF_T ".%06ld", namelookup / 1000000,
+ (long)(namelookup % 1000000));
+ }
+ }
+ /* always cleanup */
+ curl_easy_cleanup(curl);
+}
+.fi
+.SH AVAILABILITY
+Added in 7.61.0
+.SH RETURN VALUE
+Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_NAMELOOKUP_TIME "(3)"
.SH RETURN VALUE
Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
.SH "SEE ALSO"
-.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), "
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_PRETRANSFER_TIME_T "(3)"
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 2018, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at https://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLINFO_PRETRANSFER_TIME_T 3 "28 Apr 2018" "libcurl 7.61.0" "curl_easy_getinfo options"
+.SH NAME
+CURLINFO_PRETRANSFER_TIME_T \- get the time until the file transfer start
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_PRETRANSFER_TIME_T, curl_off_t *timep);
+.SH DESCRIPTION
+Pass a pointer to a curl_off_t to receive the time, in microseconds,
+it took from the
+start until the file transfer is just about to begin. This includes all
+pre-transfer commands and negotiations that are specific to the particular
+protocol(s) involved. It does \fInot\fP involve the sending of the protocol-
+specific request that triggers a transfer.
+
+See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page.
+.SH PROTOCOLS
+All
+.SH EXAMPLE
+.nf
+curl = curl_easy_init();
+if(curl) {
+ curl_off_t pretransfer;
+ curl_easy_setopt(curl, CURLOPT_URL, url);
+ res = curl_easy_perform(curl);
+ if(CURLE_OK == res) {
+ res = curl_easy_getinfo(curl, CURLINFO_PRETRANSFER_TIME_T, &pretransfer);
+ if(CURLE_OK == res) {
+ printf("Time: %" CURL_FORMAT_CURL_OFF_T ".%06ld", pretransfer / 1000000,
+ (long)(pretransfer % 1000000));
+ }
+ }
+ /* always cleanup */
+ curl_easy_cleanup(curl);
+}
+.fi
+.SH AVAILABILITY
+Added in 7.61.0
+.SH RETURN VALUE
+Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_PRETRANSFER_TIME "(3)"
.SH RETURN VALUE
Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
.SH "SEE ALSO"
-.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), "
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_REDIRECT_TIME_T "(3)"
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 2018, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at https://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLINFO_REDIRECT_TIME_T 3 "28 Apr 2018" "libcurl 7.61.0" "curl_easy_getinfo options"
+.SH NAME
+CURLINFO_REDIRECT_TIME_T \- get the time for all redirection steps
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_REDIRECT_TIME_T, curl_off_t *timep);
+.SH DESCRIPTION
+Pass a pointer to a curl_off_t to receive the total time, in microseconds,
+it took for
+all redirection steps include name lookup, connect, pretransfer and transfer
+before final transaction was started. \fICURLINFO_REDIRECT_TIME_T\fP contains
+the complete execution time for multiple redirections.
+
+See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page.
+.SH PROTOCOLS
+All
+.SH EXAMPLE
+.nf
+curl = curl_easy_init();
+if(curl) {
+ curl_off_t redirect;
+ curl_easy_setopt(curl, CURLOPT_URL, url);
+ res = curl_easy_perform(curl);
+ if(CURLE_OK == res) {
+ res = curl_easy_getinfo(curl, CURLINFO_REDIRECT_TIME_T, &redirect);
+ if(CURLE_OK == res) {
+ printf("Time: %" CURL_FORMAT_CURL_OFF_T ".%06ld", redirect / 1000000,
+ (long)(redirect % 1000000));
+ }
+ }
+ /* always cleanup */
+ curl_easy_cleanup(curl);
+}
+.fi
+.SH AVAILABILITY
+Added in 7.61.0
+.SH RETURN VALUE
+Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_REDIRECT_TIME "(3)"
.SH RETURN VALUE
Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
.SH "SEE ALSO"
-.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), "
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_STARTTRANSFER_TIME_T "(3)"
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 2018, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at https://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLINFO_STARTTRANSFER_TIME_T 3 "28 Apr 2018" "libcurl 7.61.0" "curl_easy_getinfo options"
+.SH NAME
+CURLINFO_STARTTRANSFER_TIME_T \- get the time until the first byte is received
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_STARTTRANSFER_TIME_T, curl_off_t *timep);
+.SH DESCRIPTION
+Pass a pointer to a curl_off_t to receive the time, in microseconds,
+it took from the
+start until the first byte is received by libcurl. This includes
+\fICURLINFO_PRETRANSFER_TIME_T(3)\fP and also the time the server needs to
+calculate the result.
+
+See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page.
+.SH PROTOCOLS
+All
+.SH EXAMPLE
+.nf
+curl = curl_easy_init();
+if(curl) {
+ curl_off_t start;
+ curl_easy_setopt(curl, CURLOPT_URL, url);
+ res = curl_easy_perform(curl);
+ if(CURLE_OK == res) {
+ res = curl_easy_getinfo(curl, CURLINFO_STARTTRANSFER_TIME_T, &start);
+ if(CURLE_OK == res) {
+ printf("Time: %" CURL_FORMAT_CURL_OFF_T ".%06ld", start / 1000000,
+ (long)(start % 1000000));
+ }
+ }
+ /* always cleanup */
+ curl_easy_cleanup(curl);
+}
+.fi
+.SH AVAILABILITY
+Added in 7.61.0
+.SH RETURN VALUE
+Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_STARTTRANSFER_TIME "(3)"
.SH RETURN VALUE
Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
.SH "SEE ALSO"
-.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), "
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_TOTAL_TIME_T "(3)"
--- /dev/null
+.\" **************************************************************************
+.\" * _ _ ____ _
+.\" * Project ___| | | | _ \| |
+.\" * / __| | | | |_) | |
+.\" * | (__| |_| | _ <| |___
+.\" * \___|\___/|_| \_\_____|
+.\" *
+.\" * Copyright (C) 2018, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" *
+.\" * This software is licensed as described in the file COPYING, which
+.\" * you should have received as part of this distribution. The terms
+.\" * are also available at https://curl.haxx.se/docs/copyright.html.
+.\" *
+.\" * You may opt to use, copy, modify, merge, publish, distribute and/or sell
+.\" * copies of the Software, and permit persons to whom the Software is
+.\" * furnished to do so, under the terms of the COPYING file.
+.\" *
+.\" * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+.\" * KIND, either express or implied.
+.\" *
+.\" **************************************************************************
+.\"
+.TH CURLINFO_TOTAL_TIME_T 3 "28 Apr 2018" "libcurl 7.61.0" "curl_easy_getinfo options"
+.SH NAME
+CURLINFO_TOTAL_TIME_T \- get total time of previous transfer in microseconds
+.SH SYNOPSIS
+#include <curl/curl.h>
+
+CURLcode curl_easy_getinfo(CURL *handle, CURLINFO_TOTAL_TIME_T, curl_off_t *timep);
+.SH DESCRIPTION
+Pass a pointer to a curl_off_t to receive the total time in microseconds
+for the previous transfer, including name resolving, TCP connect etc.
+The curl_off_t represents the time in microseconds.
+
+See also the TIMES overview in the \fIcurl_easy_getinfo(3)\fP man page.
+.SH PROTOCOLS
+All
+.SH EXAMPLE
+.nf
+curl = curl_easy_init();
+if(curl) {
+ curl_off_t total;
+ curl_easy_setopt(curl, CURLOPT_URL, url);
+ res = curl_easy_perform(curl);
+ if(CURLE_OK == res) {
+ res = curl_easy_getinfo(curl, CURLINFO_TOTAL_TIME_T, &total);
+ if(CURLE_OK == res) {
+ printf("Time: %" CURL_FORMAT_CURL_OFF_T ".%06ld", total / 1000000,
+ (long)(total % 1000000));
+ }
+ }
+ /* always cleanup */
+ curl_easy_cleanup(curl);
+}
+.fi
+.SH AVAILABILITY
+Added in 7.61.0
+.SH RETURN VALUE
+Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
+.SH "SEE ALSO"
+.BR curl_easy_getinfo "(3), " curl_easy_setopt "(3), " CURLINFO_TOTAL_TIME "(3)"
man_MANS = \
CURLINFO_ACTIVESOCKET.3 \
CURLINFO_APPCONNECT_TIME.3 \
+ CURLINFO_APPCONNECT_TIME_T.3 \
CURLINFO_CERTINFO.3 \
CURLINFO_CONDITION_UNMET.3 \
CURLINFO_CONNECT_TIME.3 \
+ CURLINFO_CONNECT_TIME_T.3 \
CURLINFO_CONTENT_LENGTH_DOWNLOAD.3 \
CURLINFO_CONTENT_LENGTH_DOWNLOAD_T.3 \
CURLINFO_CONTENT_LENGTH_UPLOAD.3 \
CURLINFO_LOCAL_IP.3 \
CURLINFO_LOCAL_PORT.3 \
CURLINFO_NAMELOOKUP_TIME.3 \
+ CURLINFO_NAMELOOKUP_TIME_T.3 \
CURLINFO_NUM_CONNECTS.3 \
CURLINFO_OS_ERRNO.3 \
CURLINFO_PRETRANSFER_TIME.3 \
+ CURLINFO_PRETRANSFER_TIME_T.3 \
CURLINFO_PRIMARY_IP.3 \
CURLINFO_PRIMARY_PORT.3 \
CURLINFO_PRIVATE.3 \
CURLINFO_PROXY_SSL_VERIFYRESULT.3 \
CURLINFO_REDIRECT_COUNT.3 \
CURLINFO_REDIRECT_TIME.3 \
+ CURLINFO_REDIRECT_TIME_T.3 \
CURLINFO_REDIRECT_URL.3 \
CURLINFO_REQUEST_SIZE.3 \
CURLINFO_RESPONSE_CODE.3 \
CURLINFO_SSL_ENGINES.3 \
CURLINFO_SSL_VERIFYRESULT.3 \
CURLINFO_STARTTRANSFER_TIME.3 \
+ CURLINFO_STARTTRANSFER_TIME_T.3 \
CURLINFO_TLS_SESSION.3 \
CURLINFO_TLS_SSL_PTR.3 \
CURLINFO_TOTAL_TIME.3 \
+ CURLINFO_TOTAL_TIME_T.3 \
CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE.3 \
CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE.3 \
CURLMOPT_MAXCONNECTS.3 \
CURLHEADER_UNIFIED 7.37.0
CURLINFO_ACTIVESOCKET 7.45.0
CURLINFO_APPCONNECT_TIME 7.19.0
+CURLINFO_APPCONNECT_TIME_T 7.61.0
CURLINFO_CERTINFO 7.19.1
CURLINFO_CONDITION_UNMET 7.19.4
CURLINFO_CONNECT_TIME 7.4.1
+CURLINFO_CONNECT_TIME_T 7.61.0
CURLINFO_CONTENT_LENGTH_DOWNLOAD 7.6.1
CURLINFO_CONTENT_LENGTH_DOWNLOAD_T 7.55.0
CURLINFO_CONTENT_LENGTH_UPLOAD 7.6.1
CURLINFO_LONG 7.4.1
CURLINFO_MASK 7.4.1
CURLINFO_NAMELOOKUP_TIME 7.4.1
+CURLINFO_NAMELOOKUP_TIME_T 7.61.0
CURLINFO_NONE 7.4.1
CURLINFO_NUM_CONNECTS 7.12.3
CURLINFO_OFF_T 7.55.0
CURLINFO_OS_ERRNO 7.12.2
CURLINFO_PRETRANSFER_TIME 7.4.1
+CURLINFO_PRETRANSFER_TIME_T 7.61.0
CURLINFO_PRIMARY_IP 7.19.0
CURLINFO_PRIMARY_PORT 7.21.0
CURLINFO_PRIVATE 7.10.3
CURLINFO_PTR 7.54.1
CURLINFO_REDIRECT_COUNT 7.9.7
CURLINFO_REDIRECT_TIME 7.9.7
+CURLINFO_REDIRECT_TIME_T 7.61.0
CURLINFO_REDIRECT_URL 7.18.2
CURLINFO_REQUEST_SIZE 7.4.1
CURLINFO_RESPONSE_CODE 7.10.8
CURLINFO_SSL_ENGINES 7.12.3
CURLINFO_SSL_VERIFYRESULT 7.5
CURLINFO_STARTTRANSFER_TIME 7.9.2
+CURLINFO_STARTTRANSFER_TIME_T 7.61.0
CURLINFO_STRING 7.4.1
CURLINFO_TEXT 7.9.6
CURLINFO_TLS_SESSION 7.34.0 7.48.0
CURLINFO_TLS_SSL_PTR 7.48.0
CURLINFO_TOTAL_TIME 7.4.1
+CURLINFO_TOTAL_TIME_T 7.61.0
CURLINFO_TYPEMASK 7.4.1
CURLIOCMD_NOP 7.12.3
CURLIOCMD_RESTARTREAD 7.12.3
CURLINFO_SCHEME = CURLINFO_STRING + 49,
/* Fill in new entries below here! */
- CURLINFO_LASTONE = 49
+ /* Preferably these would be defined conditionally based on the
+ sizeof curl_off_t being 64-bits */
+ CURLINFO_TOTAL_TIME_T = CURLINFO_OFF_T + 50,
+ CURLINFO_NAMELOOKUP_TIME_T = CURLINFO_OFF_T + 51,
+ CURLINFO_CONNECT_TIME_T = CURLINFO_OFF_T + 52,
+ CURLINFO_PRETRANSFER_TIME_T = CURLINFO_OFF_T + 53,
+ CURLINFO_STARTTRANSFER_TIME_T = CURLINFO_OFF_T + 54,
+ CURLINFO_REDIRECT_TIME_T = CURLINFO_OFF_T + 55,
+ CURLINFO_APPCONNECT_TIME_T = CURLINFO_OFF_T + 56,
+
+ CURLINFO_LASTONE = 56
} CURLINFO;
/* CURLINFO_RESPONSE_CODE is the new name for the option previously known as
*param_offt = (data->progress.flags & PGRS_UL_SIZE_KNOWN)?
data->progress.size_ul:-1;
break;
+ case CURLINFO_TOTAL_TIME_T:
+ *param_offt = data->progress.timespent;
+ break;
+ case CURLINFO_NAMELOOKUP_TIME_T:
+ *param_offt = data->progress.t_nslookup;
+ break;
+ case CURLINFO_CONNECT_TIME_T:
+ *param_offt = data->progress.t_connect;
+ break;
+ case CURLINFO_APPCONNECT_TIME_T:
+ *param_offt = data->progress.t_appconnect;
+ break;
+ case CURLINFO_PRETRANSFER_TIME_T:
+ *param_offt = data->progress.t_pretransfer;
+ break;
+ case CURLINFO_STARTTRANSFER_TIME_T:
+ *param_offt = data->progress.t_starttransfer;
+ break;
+ case CURLINFO_REDIRECT_TIME_T:
+ *param_offt = data->progress.t_redirect;
+ break;
+
default:
return CURLE_UNKNOWN_OPTION;
}
if(libtest_arg2) {
FILE *moo = fopen(libtest_arg2, "wb");
if(moo) {
- double time_namelookup;
- double time_connect;
- double time_pretransfer;
- double time_starttransfer;
- double time_total;
+ curl_off_t time_namelookup;
+ curl_off_t time_connect;
+ curl_off_t time_pretransfer;
+ curl_off_t time_starttransfer;
+ curl_off_t time_total;
fprintf(moo, "IP: %s\n", ipstr);
- curl_easy_getinfo(curl, CURLINFO_NAMELOOKUP_TIME, &time_namelookup);
- curl_easy_getinfo(curl, CURLINFO_CONNECT_TIME, &time_connect);
- curl_easy_getinfo(curl, CURLINFO_PRETRANSFER_TIME, &time_pretransfer);
- curl_easy_getinfo(curl, CURLINFO_STARTTRANSFER_TIME,
+ curl_easy_getinfo(curl, CURLINFO_NAMELOOKUP_TIME_T, &time_namelookup);
+ curl_easy_getinfo(curl, CURLINFO_CONNECT_TIME_T, &time_connect);
+ curl_easy_getinfo(curl, CURLINFO_PRETRANSFER_TIME_T,
+ &time_pretransfer);
+ curl_easy_getinfo(curl, CURLINFO_STARTTRANSFER_TIME_T,
&time_starttransfer);
- curl_easy_getinfo(curl, CURLINFO_TOTAL_TIME, &time_total);
+ curl_easy_getinfo(curl, CURLINFO_TOTAL_TIME_T, &time_total);
/* since the timing will always vary we only compare relative
differences between these 5 times */
if(time_namelookup > time_connect) {
- fprintf(moo, "namelookup vs connect: %f %f\n",
- time_namelookup, time_connect);
+ fprintf(moo, "namelookup vs connect: %" CURL_FORMAT_CURL_OFF_T
+ ".%06ld %" CURL_FORMAT_CURL_OFF_T ".%06ld\n",
+ (time_namelookup / 1000000),
+ (long)(time_namelookup % 1000000),
+ (time_connect / 1000000), (long)(time_connect % 1000000));
}
if(time_connect > time_pretransfer) {
- fprintf(moo, "connect vs pretransfer: %f %f\n",
- time_connect, time_pretransfer);
+ fprintf(moo, "connect vs pretransfer: %" CURL_FORMAT_CURL_OFF_T
+ ".%06ld %" CURL_FORMAT_CURL_OFF_T ".%06ld\n",
+ (time_connect / 1000000), (long)(time_connect % 1000000),
+ (time_pretransfer / 1000000),
+ (long)(time_pretransfer % 1000000));
}
if(time_pretransfer > time_starttransfer) {
- fprintf(moo, "pretransfer vs starttransfer: %f %f\n",
- time_pretransfer, time_starttransfer);
+ fprintf(moo, "pretransfer vs starttransfer: %" CURL_FORMAT_CURL_OFF_T
+ ".%06ld %" CURL_FORMAT_CURL_OFF_T ".%06ld\n",
+ (time_pretransfer / 1000000),
+ (long)(time_pretransfer % 1000000),
+ (time_starttransfer / 1000000),
+ (long)(time_starttransfer % 1000000));
}
if(time_starttransfer > time_total) {
- fprintf(moo, "starttransfer vs total: %f %f\n",
- time_starttransfer, time_total);
+ fprintf(moo, "starttransfer vs total: %" CURL_FORMAT_CURL_OFF_T
+ ".%06ld %" CURL_FORMAT_CURL_OFF_T ".%06ld\n",
+ (time_starttransfer / 1000000),
+ (long)(time_starttransfer % 1000000),
+ (time_total / 1000000), (long)(time_total % 1000000));
}
fclose(moo);
projects / curl / commitdiff