Added function esp_sleep_disable_wakeup_source() to deactivate wakeup trigger for selected source.
Updated documentation for this function in sleep_modes.rst file.
Updated unit test to check this functionality for light sleep.
The test_sleep.c unit test is updated to add reliability for unit testing.
(TW#18952)
Closes https://github.com/espressif/esp-idf/issues/1677
typedef esp_sleep_ext1_wakeup_mode_t esp_ext1_wakeup_mode_t;
typedef esp_sleep_wakeup_cause_t esp_deep_sleep_wakeup_cause_t;
+inline static esp_err_t esp_deep_sleep_disable_wakeup_source(esp_sleep_source_t source)
+{
+ return esp_sleep_disable_wakeup_source(source);
+}
+
inline static esp_err_t esp_deep_sleep_enable_ulp_wakeup(void)
{
return esp_sleep_enable_ulp_wakeup();
return esp_sleep_enable_timer_wakeup(time_in_us);
}
-inline static esp_err_t esp_deep_sleep_disable_timer_wakeup(void)
-{
- return esp_sleep_disable_timer_wakeup();
-}
-
inline static esp_err_t esp_deep_sleep_enable_touchpad_wakeup(void)
{
return esp_sleep_enable_touchpad_wakeup();
#include "esp_err.h"
#include "driver/gpio.h"
#include "driver/touch_pad.h"
+#include "soc/rtc.h"
#ifdef __cplusplus
extern "C" {
ESP_SLEEP_WAKEUP_ULP, //!< Wakeup caused by ULP program
} esp_sleep_wakeup_cause_t;
+/**
+ * @brief Sleep wakeup sources for esp_sleep_disable_wakeup_source function
+ */
+typedef enum {
+ ESP_SLEEP_SOURCE_UNDEFINED, //!< Wakeup source is not defined
+ ESP_SLEEP_SOURCE_EXT0, //!< Wakeup source for external signal using RTC_IO
+ ESP_SLEEP_SOURCE_EXT1, //!< Wakeup source for external signal using RTC_CNTL
+ ESP_SLEEP_SOURCE_TIMER, //!< Wakeup source for timer
+ ESP_SLEEP_SOURCE_TOUCHPAD, //!< Wakeup source for touchpad
+ ESP_SLEEP_SOURCE_ULP, //!< Wakeup source for ULP program
+} esp_sleep_source_t;
+
+/**
+ * @brief Disable wakeup source
+ *
+ * This function is used to deactivate wake up trigger for source
+ * defined as parameter of the function.
+ *
+ * @note This function does not modify wake up configuration in RTC.
+ * It will be performed in esp_sleep_start function.
+ *
+ * See docs/sleep-modes.rst for details.
+ *
+ * @param source - number of source to disable of type esp_sleep_source_t
+ * @return
+ * - ESP_OK on success
+ * - ESP_ERR_INVALID_STATE if trigger was not active
+ */
+esp_err_t esp_sleep_disable_wakeup_source(esp_sleep_source_t source);
/**
* @brief Enable wakeup by ULP coprocessor
*/
esp_err_t esp_sleep_enable_ulp_wakeup();
- /**
+/**
* @brief Enable wakeup by timer
* @param time_in_us time before wakeup, in microseconds
* @return
*/
esp_err_t esp_sleep_enable_timer_wakeup(uint64_t time_in_us);
-/**
- * @brief Disable timer wakeup
- *
- * This function is used to deactivate timer wakeup trigger
- * after first sleep for example to allow wakeup from other sources.
- *
- * @note This function does not modify wakeup configuration in RTC.
- * It will be performed in esp_sleep_start function.
- *
- * See docs/sleep-modes.rst for details.
- *
- * @return
- * - ESP_OK on success
- * - ESP_ERR_INVALID_STATE if trigger was not active
- */
-esp_err_t esp_sleep_disable_timer_wakeup();
-
/**
* @brief Enable wakeup by touch sensor
*
// Time from VDD_SDIO power up to first flash read in ROM code
#define VDD_SDIO_POWERUP_TO_FLASH_READ_US 700
+#define CHECK_SOURCE(source, value, mask) ((s_config.wakeup_triggers & mask) && \
+ (source == value))
+
/**
* Internal structure which holds all requested deep sleep parameters
*/
void system_deep_sleep(uint64_t) __attribute__((alias("esp_deep_sleep")));
+esp_err_t esp_sleep_disable_wakeup_source(esp_sleep_source_t source)
+{
+ // For most of sources it is enough to set trigger mask in local
+ // configuration structure. The actual RTC wake up options
+ // will be updated by esp_sleep_start().
+ if (CHECK_SOURCE(source, ESP_SLEEP_SOURCE_TIMER, RTC_TIMER_TRIG_EN)) {
+ s_config.wakeup_triggers &= ~RTC_TIMER_TRIG_EN;
+ s_config.sleep_duration = 0;
+ }
+ else if (CHECK_SOURCE(source, ESP_SLEEP_SOURCE_EXT0, RTC_EXT0_TRIG_EN)) {
+ s_config.ext0_rtc_gpio_num = 0;
+ s_config.ext0_trigger_level = 0;
+ s_config.wakeup_triggers &= ~RTC_EXT0_TRIG_EN;
+ }
+ else if (CHECK_SOURCE(source, ESP_SLEEP_SOURCE_EXT1, RTC_EXT1_TRIG_EN)) {
+ s_config.ext1_rtc_gpio_mask = 0;
+ s_config.ext1_trigger_mode = 0;
+ s_config.wakeup_triggers &= ~RTC_EXT1_TRIG_EN;
+ }
+ else if (CHECK_SOURCE(source, ESP_SLEEP_SOURCE_TOUCHPAD, RTC_TOUCH_TRIG_EN)) {
+ s_config.wakeup_triggers &= ~RTC_TOUCH_TRIG_EN;
+ }
+#ifdef CONFIG_ULP_COPROC_ENABLED
+ else if (CHECK_SOURCE(source, ESP_SLEEP_SOURCE_ULP, RTC_ULP_TRIG_EN)) {
+ // The ulp wake up option is disabled immediately
+ CLEAR_PERI_REG_MASK(RTC_CNTL_STATE0_REG, RTC_CNTL_ULP_CP_WAKEUP_FORCE_EN);
+ CLEAR_PERI_REG_MASK(RTC_CNTL_STATE0_REG, RTC_CNTL_ULP_CP_SLP_TIMER_EN);
+ s_config.wakeup_triggers &= ~RTC_ULP_TRIG_EN;
+ }
+#endif
+ else {
+ ESP_LOGE(TAG, "Incorrect wakeup source (%d) to disable.", (int) source);
+ return ESP_ERR_INVALID_STATE;
+ }
+ return ESP_OK;
+}
+
esp_err_t esp_sleep_enable_ulp_wakeup()
{
#ifdef CONFIG_ULP_COPROC_ENABLED
return ESP_OK;
}
-esp_err_t esp_sleep_disable_timer_wakeup()
-{
- if (s_config.wakeup_triggers & RTC_TIMER_TRIG_EN) {
- // The only timer wakeup trigger should be disabled, setup will
- // be performed in rtc_sleep_start() which updates wakeup options
- // in RTC peripheral registers
- s_config.wakeup_triggers &= ~RTC_TIMER_TRIG_EN;
- s_config.sleep_duration = 0;
- }
- else {
- ESP_LOGE(TAG, "The timer wake-up trigger is not set.");
- return ESP_ERR_INVALID_STATE;
- }
- return ESP_OK;
-}
-
static void timer_wakeup_prepare()
{
uint32_t period = esp_clk_slowclk_cal_get();
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
+#include "soc/rtc_cntl_reg.h" // for read rtc registers directly (cause)
+#include "soc/soc.h"
+
#define ESP_EXT0_WAKEUP_LEVEL_LOW 0
#define ESP_EXT0_WAKEUP_LEVEL_HIGH 1
+// These are flags for wakeup cause to get it directly from RTC
+#define RTC_EXT0_TRIG_EN BIT(0) //!< EXT0 GPIO wakeup
+#define RTC_EXT1_TRIG_EN BIT(1) //!< EXT1 GPIO wakeup
+#define RTC_GPIO_TRIG_EN BIT(2) //!< GPIO wakeup (light sleep only)
+#define RTC_TIMER_TRIG_EN BIT(3) //!< Timer wakeup
+#define RTC_SDIO_TRIG_EN BIT(4) //!< SDIO wakeup (light sleep only)
+#define RTC_MAC_TRIG_EN BIT(5) //!< MAC wakeup (light sleep only)
+#define RTC_UART0_TRIG_EN BIT(6) //!< UART0 wakeup (light sleep only)
+#define RTC_UART1_TRIG_EN BIT(7) //!< UART1 wakeup (light sleep only)
+#define RTC_TOUCH_TRIG_EN BIT(8) //!< Touch wakeup
+#define RTC_ULP_TRIG_EN BIT(9) //!< ULP wakeup
+#define RTC_BT_TRIG_EN BIT(10) //!< BT wakeup (light sleep only)
+
+static struct timeval tv_start, tv_stop;
+
TEST_CASE("esp_deepsleep works", "[deepsleep][reset=DEEPSLEEP_RESET]")
{
esp_deep_sleep(2000000);
TEST_ASSERT_INT32_WITHIN(500, 2000, (int) dt);
}
-TEST_CASE("wake up disable timer for ext0 wakeup (13 low)", "[deepsleep][ignore]")
-{
- // Setup timer to wakeup with timeout
- esp_sleep_enable_timer_wakeup(2000000);
- struct timeval tv_start, tv_stop;
- gettimeofday(&tv_start, NULL);
- esp_light_sleep_start();
- gettimeofday(&tv_stop, NULL);
- float dt = (tv_stop.tv_sec - tv_start.tv_sec) * 1e3f +
- (tv_stop.tv_usec - tv_start.tv_usec) * 1e-3f;
- printf("Timer sleep time = %d\r\n", (int)dt);
-
- TEST_ASSERT_INT32_WITHIN(500, 2000, (int) dt);
-
- // Setup ext0 configuration to wake up
- ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
- ESP_ERROR_CHECK(gpio_pullup_en(GPIO_NUM_13));
- ESP_ERROR_CHECK(gpio_pulldown_dis(GPIO_NUM_13));
- ESP_ERROR_CHECK(esp_sleep_enable_ext0_wakeup(GPIO_NUM_13, ESP_EXT0_WAKEUP_LEVEL_LOW));
-
- // Disable timer wakeup trigger to wakeup from ext0 source
- // instead of timer wakeup
- ESP_ERROR_CHECK(esp_sleep_disable_timer_wakeup());
- printf("Waiting low level on GPIO_13\r\n");
-
- gettimeofday(&tv_start, NULL);
- esp_light_sleep_start();
- gettimeofday(&tv_stop, NULL);
-
- dt = (tv_stop.tv_sec - tv_start.tv_sec) * 1e3f +
- (tv_stop.tv_usec - tv_start.tv_usec) * 1e-3f;
- printf("Ext0 sleep time = %d\r\n", (int)dt);
-
- // Check error message
- esp_err_t err_code = esp_sleep_disable_timer_wakeup();
- TEST_ASSERT(err_code == ESP_ERR_INVALID_STATE);
-}
-
#ifndef CONFIG_FREERTOS_UNICORE
TEST_CASE("enter deep sleep on APP CPU and wake up using timer", "[deepsleep][reset=DEEPSLEEP_RESET]")
{
ESP_ERROR_CHECK(esp_sleep_enable_ext1_wakeup(BIT(GPIO_NUM_13), ESP_EXT1_WAKEUP_ALL_LOW));
esp_deep_sleep_start();
}
+
+static float get_time(void)
+{
+ gettimeofday(&tv_stop, NULL);
+
+ float dt = (tv_stop.tv_sec - tv_start.tv_sec) * 1e3f +
+ (tv_stop.tv_usec - tv_start.tv_usec) * 1e-3f;
+ return abs(dt);
+}
+
+static uint32_t get_cause()
+{
+ uint32_t wakeup_cause = REG_GET_FIELD(RTC_CNTL_WAKEUP_STATE_REG, \
+ RTC_CNTL_WAKEUP_CAUSE);
+ return wakeup_cause;
+}
+
+// This test case verifies deactivation of trigger for wake up sources
+TEST_CASE("disable source behavior", "[deepsleep][ignore]")
+{
+ float dt = 0;
+
+ printf("Setup timer and ext0 to wakeup imediately from GPIO_13 \n");
+
+ // Setup ext0 configuration to wake up almost immediately
+ // The wakeup time is proportional to input capacitance * pullup resistance
+ ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
+ ESP_ERROR_CHECK(gpio_pullup_en(GPIO_NUM_13));
+ ESP_ERROR_CHECK(gpio_pulldown_dis(GPIO_NUM_13));
+ ESP_ERROR_CHECK(esp_sleep_enable_ext0_wakeup(GPIO_NUM_13, ESP_EXT0_WAKEUP_LEVEL_HIGH));
+
+ // Setup timer to wakeup with timeout
+ esp_sleep_enable_timer_wakeup(2000000);
+
+ // Save start time
+ gettimeofday(&tv_start, NULL);
+ esp_light_sleep_start();
+
+ dt = get_time();
+ printf("Ext0 sleep time = %d \n", (int) dt);
+
+ // Check wakeup from Ext0 using time measurement because wakeup cause is
+ // not available in light sleep mode
+ TEST_ASSERT_INT32_WITHIN(297, 300, (int) dt);
+
+ TEST_ASSERT((get_cause() & RTC_EXT0_TRIG_EN) != 0);
+
+ // Disable Ext0 source. Timer source should be triggered
+ ESP_ERROR_CHECK(esp_sleep_disable_wakeup_source(ESP_SLEEP_SOURCE_EXT0));
+ printf("Disable ext0 source leave timer active.\n");
+
+ gettimeofday(&tv_start, NULL);
+ esp_light_sleep_start();
+
+ dt = get_time();
+ printf("Timer sleep time = %d \n", (int) dt);
+
+ TEST_ASSERT_INT32_WITHIN(500, 2000, (int) dt);
+
+ // Additionaly check wakeup cause
+ TEST_ASSERT((get_cause() & RTC_TIMER_TRIG_EN) != 0);
+
+ // Disable timer source.
+ ESP_ERROR_CHECK(esp_sleep_disable_wakeup_source(ESP_SLEEP_SOURCE_TIMER));
+
+ // Setup ext0 configuration to wake up immediately
+ ESP_ERROR_CHECK(rtc_gpio_init(GPIO_NUM_13));
+ ESP_ERROR_CHECK(gpio_pullup_en(GPIO_NUM_13));
+ ESP_ERROR_CHECK(gpio_pulldown_dis(GPIO_NUM_13));
+ ESP_ERROR_CHECK(esp_sleep_enable_ext0_wakeup(GPIO_NUM_13, ESP_EXT0_WAKEUP_LEVEL_HIGH));
+
+ printf("Disable timer and wake up from ext0 source.\n");
+
+ gettimeofday(&tv_start, NULL);
+ esp_light_sleep_start();
+
+ dt = get_time();
+ printf("Ext0 sleep time = %d \n", (int) dt);
+
+ TEST_ASSERT_INT32_WITHIN(198, 200, (int) dt);
+ TEST_ASSERT((get_cause() & RTC_EXT0_TRIG_EN) != 0);
+
+ // Check error message when source is already disabled
+ esp_err_t err_code = esp_sleep_disable_wakeup_source(ESP_SLEEP_SOURCE_TIMER);
+ TEST_ASSERT(err_code == ESP_ERR_INVALID_STATE);
+}
+
In deep sleep mode, CPUs, most of the RAM, and all the digital peripherals which are clocked from APB_CLK are powered off. The only parts of the chip which can still be powered on are: RTC controller, RTC peripherals (including ULP coprocessor), and RTC memories (slow and fast).
-Wakeup from deep and light sleep modes can be done using several sources. These sources can be combined, in this case the chip will wake up when any one of the sources is triggered. Wakeup sources can be enabled using ``esp_sleep_enable_X_wakeup`` APIs. Next section describes these APIs in detail. Wakeup sources can be configured at any moment before entering light or deep sleep mode.
+Wakeup from deep and light sleep modes can be done using several sources. These sources can be combined, in this case the chip will wake up when any one of the sources is triggered. Wakeup sources can be enabled using ``esp_sleep_enable_X_wakeup`` APIs and can be disabled using ``esp_sleep_disable_wakeup_source`` API. Next section describes these APIs in detail. Wakeup sources can be configured at any moment before entering light or deep sleep mode.
Additionally, the application can force specific powerdown modes for the RTC peripherals and RTC memories using ``esp_sleep_pd_config`` API.
.. doxygenfunction:: esp_sleep_enable_timer_wakeup
-The timer wakeup functionality can be disabled to use other wakeup sources instead of timer after first sleep. The function below can be used in this case.
-
-.. doxygenfunction:: esp_sleep_disable_timer_wakeup
-
Touch pad
^^^^^^^^^
.. doxygenfunction:: esp_sleep_get_touchpad_wakeup_status
.. doxygenfunction:: esp_sleep_get_ext1_wakeup_status
+Disable sleep wakeup source
+---------------------------
+
+Previously configured wakeup source can be disabled later using ``esp_sleep_disable_wakeup_source`` API. This function deactivates trigger for source defined as input parameter if it should not be used to wake up from sleep.
+
+.. doxygenenum:: esp_sleep_source_t
+.. doxygenfunction:: esp_sleep_disable_wakeup_source
Application Example
-------------------