AUTH_OBJS should contain .lo files not .o files.

diff --git a/configure b/configure
index 88df6f01490403d294e0005e8f48a9194760ca44..63a087b4e696aa922c4ae17765bf59e8a0ea0c8c 100755 (executable)
--- a/configure
+++ b/configure
@@ -21974,7 +21974,7 @@ done
 #define HAVE_PAM 1
 _ACEOF
 
-       AUTH_OBJS="$AUTH_OBJS pam.o";
+       AUTH_OBJS="$AUTH_OBJS pam.lo";
        AUTH_EXCL=PAM
        { echo "$as_me:$LINENO: checking whether to use PAM session support" >&5
 echo $ECHO_N "checking whether to use PAM session support... $ECHO_C" >&6; }
@@ -22135,7 +22135,7 @@ echo "$as_me: using AIX general authentication" >&6;}
 #define HAVE_AIXAUTH 1
 _ACEOF
 
-       AUTH_OBJS="$AUTH_OBJS aix_auth.o";
+       AUTH_OBJS="$AUTH_OBJS aix_auth.lo";
        SUDO_LIBS="${SUDO_LIBS} -ls"
        AUTH_EXCL=AIX_AUTH
     fi
@@ -22277,7 +22277,7 @@ if test $ac_cv_header_bsd_auth_h = yes; then
 #define HAVE_BSD_AUTH_H 1
 _ACEOF
 
-       AUTH_OBJS="$AUTH_OBJS bsdauth.o"
+       AUTH_OBJS="$AUTH_OBJS bsdauth.lo"
        BSDAUTH_USAGE='[-a auth_type] '
        AUTH_EXCL=BSD_AUTH; BAMAN=""
 else
@@ -22388,7 +22388,7 @@ done
 
     if test "$found" = "true"; then
        AUTH_EXCL=SIA
-       AUTH_OBJS="$AUTH_OBJS sia.o"
+       AUTH_OBJS="$AUTH_OBJS sia.lo"
     fi
 fi
 
@@ -22408,7 +22408,7 @@ if test ${with_fwtk-'no'} != "no"; then
        with_fwtk=yes
     fi
     SUDO_LIBS="${SUDO_LIBS} -lauth -lfwall"
-    AUTH_OBJS="$AUTH_OBJS fwtk.o"
+    AUTH_OBJS="$AUTH_OBJS fwtk.lo"
 fi
 
 if test ${with_SecurID-'no'} != "no"; then
@@ -22500,7 +22500,7 @@ fi
 echo "${ECHO_T}$ac_cv_lib_aceclnt_SD_Init_______lpthread_______" >&6; }
 if test $ac_cv_lib_aceclnt_SD_Init_______lpthread_______ = yes; then
 
-           AUTH_OBJS="$AUTH_OBJS securid5.o";
+           AUTH_OBJS="$AUTH_OBJS securid5.lo";
            SUDO_LIBS="${SUDO_LIBS} -laceclnt -lpthread"
 
 
@@ -22517,7 +22517,7 @@ if test $ac_cv_lib_aceclnt_SD_Init_______lpthread_______ = yes; then
 
 else
 
-           AUTH_OBJS="$AUTH_OBJS securid.o";
+           AUTH_OBJS="$AUTH_OBJS securid.lo";
            SUDO_LIBS="${SUDO_LIBS} ${with_SecurID}/sdiclient.a"
 
 fi
@@ -23117,7 +23117,7 @@ fi
 
     LDFLAGS="$O_LDFLAGS"
     SUDO_LIBS="${SUDO_LIBS} $K4LIBS"
-    AUTH_OBJS="$AUTH_OBJS kerb4.o"
+    AUTH_OBJS="$AUTH_OBJS kerb4.lo"
 fi
 
 if test ${with_kerb5-'no'} != "no"; then
@@ -23164,7 +23164,7 @@ fi
 #define HAVE_KERB5 1
 _ACEOF
 
-       AUTH_OBJS="$AUTH_OBJS kerb5.o"
+       AUTH_OBJS="$AUTH_OBJS kerb5.lo"
        CPPFLAGS="$CPPFLAGS `krb5-config --cflags`"
        SUDO_LIBS="$SUDO_LIBS `krb5-config --libs`"
                                { echo "$as_me:$LINENO: checking whether we are using Heimdal" >&5
@@ -23455,7 +23455,7 @@ fi
 fi
 
 rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-    AUTH_OBJS="$AUTH_OBJS kerb5.o"
+    AUTH_OBJS="$AUTH_OBJS kerb5.lo"
     _LIBS="$LIBS"
     LIBS="${LIBS} ${SUDO_LIBS}"
 
@@ -23762,13 +23762,13 @@ echo "$as_me: WARNING: Unable to locate AFS libraries, you will have to edit the
 echo "$as_me: WARNING: Unable to locate AFS include dir, you may have to edit the Makefile and add -I/path/to/afs/includes to CPPFLAGS or rerun configure with the --with-incpath options." >&2;}
     fi
 
-    AUTH_OBJS="$AUTH_OBJS afs.o"
+    AUTH_OBJS="$AUTH_OBJS afs.lo"
 fi
 
 if test ${with_DCE-'no'} = "yes"; then
     DCE_OBJS="${DCE_OBJS} dce_pwent.o"
     SUDO_LIBS="${SUDO_LIBS} -ldce"
-    AUTH_OBJS="$AUTH_OBJS dce.o"
+    AUTH_OBJS="$AUTH_OBJS dce.lo"
 fi
 
 if test ${with_skey-'no'} = "yes"; then
@@ -24018,7 +24018,7 @@ fi
 
     LDFLAGS="$O_LDFLAGS"
     SUDO_LIBS="${SUDO_LIBS} -lskey"
-    AUTH_OBJS="$AUTH_OBJS rfc1938.o"
+    AUTH_OBJS="$AUTH_OBJS rfc1938.lo"
 fi
 
 if test ${with_opie-'no'} = "yes"; then
@@ -24200,7 +24200,7 @@ fi
 
     LDFLAGS="$O_LDFLAGS"
     SUDO_LIBS="${SUDO_LIBS} -lopie"
-    AUTH_OBJS="$AUTH_OBJS rfc1938.o"
+    AUTH_OBJS="$AUTH_OBJS rfc1938.lo"
 fi
 
 if test ${with_passwd-'no'} != "no"; then
@@ -24773,7 +24773,7 @@ _ACEOF
 fi
 done
 
-       AUTH_OBJS="$AUTH_OBJS secureware.o"
+       AUTH_OBJS="$AUTH_OBJS secureware.lo"
     fi
 fi
 
@@ -26034,7 +26034,7 @@ echo "${ECHO_T}$with_transcript" >&6; }
 
 case "$with_passwd" in
 yes|maybe)
-    AUTH_OBJS="$AUTH_OBJS passwd.o"
+    AUTH_OBJS="$AUTH_OBJS passwd.lo"
     ;;
 *)
     cat >>confdefs.h <<\_ACEOF
@@ -26049,7 +26049,7 @@ echo "$as_me: error: no authentication methods defined." >&2;}
     ;;
 esac
 AUTH_OBJS=${AUTH_OBJS# }
-_AUTH=`echo "$AUTH_OBJS" | sed 's/\.o//g'`
+_AUTH=`echo "$AUTH_OBJS" | sed 's/\.lo//g'`
 { echo "$as_me:$LINENO: using the following authentication methods: $_AUTH" >&5
 echo "$as_me: using the following authentication methods: $_AUTH" >&6;}
 

diff --git a/configure.in b/configure.in
index 1cb53a4cda2c258828f520daac6d681efc0cb5a9..0458125fd4e2368f12a4d4b3970bf5468447500a 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -2075,7 +2075,7 @@ if test ${with_pam-"no"} != "no"; then
     AC_CHECK_HEADERS([security/pam_appl.h] [pam/pam_appl.h], [with_pam=yes; break])
     if test "$with_pam" = "yes"; then
        AC_DEFINE(HAVE_PAM)
-       AUTH_OBJS="$AUTH_OBJS pam.o";
+       AUTH_OBJS="$AUTH_OBJS pam.lo";
        AUTH_EXCL=PAM
        AC_MSG_CHECKING(whether to use PAM session support)
        AC_ARG_ENABLE(pam_session,
@@ -2113,7 +2113,7 @@ if test ${with_aixauth-'no'} != "no"; then
     if test X"$with_aixauth" != X"maybe" -o X"$AUTH_EXCL" = X""; then
        AC_MSG_NOTICE([using AIX general authentication])
        AC_DEFINE(HAVE_AIXAUTH)
-       AUTH_OBJS="$AUTH_OBJS aix_auth.o";
+       AUTH_OBJS="$AUTH_OBJS aix_auth.lo";
        SUDO_LIBS="${SUDO_LIBS} -ls"
        AUTH_EXCL=AIX_AUTH
     fi
@@ -2125,7 +2125,7 @@ dnl If set to "maybe" only enable if no other exclusive method in use.
 dnl
 if test ${with_bsdauth-'no'} != "no"; then
     AC_CHECK_HEADER(bsd_auth.h, AC_DEFINE(HAVE_BSD_AUTH_H)
-       [AUTH_OBJS="$AUTH_OBJS bsdauth.o"]
+       [AUTH_OBJS="$AUTH_OBJS bsdauth.lo"]
        [BSDAUTH_USAGE='[[-a auth_type]] ']
        [AUTH_EXCL=BSD_AUTH; BAMAN=""],
        [AC_MSG_ERROR([BSD authentication was specified but bsd_auth.h could not be found])])
@@ -2138,7 +2138,7 @@ if test ${CHECKSIA-'false'} = "true"; then
     AC_CHECK_FUNCS(sia_ses_init, [found=true], [found=false])
     if test "$found" = "true"; then
        AUTH_EXCL=SIA
-       AUTH_OBJS="$AUTH_OBJS sia.o"
+       AUTH_OBJS="$AUTH_OBJS sia.lo"
     fi
 fi
 
@@ -2152,7 +2152,7 @@ if test ${with_fwtk-'no'} != "no"; then
        with_fwtk=yes
     fi
     SUDO_LIBS="${SUDO_LIBS} -lauth -lfwall"
-    AUTH_OBJS="$AUTH_OBJS fwtk.o"
+    AUTH_OBJS="$AUTH_OBJS fwtk.lo"
 fi
 
 dnl
@@ -2174,13 +2174,13 @@ if test ${with_SecurID-'no'} != "no"; then
     #
     AC_CHECK_LIB(aceclnt, SD_Init,
        [
-           AUTH_OBJS="$AUTH_OBJS securid5.o";
+           AUTH_OBJS="$AUTH_OBJS securid5.lo";
            SUDO_LIBS="${SUDO_LIBS} -laceclnt -lpthread"
        ]
        [
            SUDO_APPEND_LIBPATH(SUDO_LDFLAGS, [${with_SecurID}])
        ], [
-           AUTH_OBJS="$AUTH_OBJS securid.o";
+           AUTH_OBJS="$AUTH_OBJS securid.lo";
            SUDO_LIBS="${SUDO_LIBS} ${with_SecurID}/sdiclient.a"
        ],
        [
@@ -2263,7 +2263,7 @@ if test ${with_kerb4-'no'} != "no"; then
     ], [$K4LIBS])
     LDFLAGS="$O_LDFLAGS"
     SUDO_LIBS="${SUDO_LIBS} $K4LIBS"
-    AUTH_OBJS="$AUTH_OBJS kerb4.o"
+    AUTH_OBJS="$AUTH_OBJS kerb4.lo"
 fi
 
 dnl
@@ -2274,7 +2274,7 @@ if test ${with_kerb5-'no'} != "no"; then
     AC_CHECK_PROG(KRB5CONFIG, krb5-config, yes, "")
     if test -n "$KRB5CONFIG"; then
        AC_DEFINE(HAVE_KERB5)
-       AUTH_OBJS="$AUTH_OBJS kerb5.o"
+       AUTH_OBJS="$AUTH_OBJS kerb5.lo"
        CPPFLAGS="$CPPFLAGS `krb5-config --cflags`"
        SUDO_LIBS="$SUDO_LIBS `krb5-config --libs`"
        dnl
@@ -2327,7 +2327,7 @@ if test ${with_kerb5-'no'} != "no" -a -z "$KRB5CONFIG"; then
            SUDO_LIBS="${SUDO_LIBS} -lkrb5 -lk5crypto -lcom_err"
            AC_CHECK_LIB(krb5support, main, [SUDO_LIBS="${SUDO_LIBS} -lkrb5support"])
     ])
-    AUTH_OBJS="$AUTH_OBJS kerb5.o"
+    AUTH_OBJS="$AUTH_OBJS kerb5.lo"
     _LIBS="$LIBS"
     LIBS="${LIBS} ${SUDO_LIBS}"
     AC_CHECK_FUNCS(krb5_verify_user krb5_init_secure_context)
@@ -2392,7 +2392,7 @@ if test ${with_AFS-'no'} = "yes"; then
        AC_MSG_WARN([Unable to locate AFS include dir, you may have to edit the Makefile and add -I/path/to/afs/includes to CPPFLAGS or rerun configure with the --with-incpath options.])
     fi
 
-    AUTH_OBJS="$AUTH_OBJS afs.o"
+    AUTH_OBJS="$AUTH_OBJS afs.lo"
 fi
 
 dnl
@@ -2402,7 +2402,7 @@ dnl
 if test ${with_DCE-'no'} = "yes"; then
     DCE_OBJS="${DCE_OBJS} dce_pwent.o"
     SUDO_LIBS="${SUDO_LIBS} -ldce"
-    AUTH_OBJS="$AUTH_OBJS dce.o"
+    AUTH_OBJS="$AUTH_OBJS dce.lo"
 fi
 
 dnl
@@ -2436,7 +2436,7 @@ if test ${with_skey-'no'} = "yes"; then
     AC_CHECK_LIB(skey, skeyaccess, AC_DEFINE(HAVE_SKEYACCESS))
     LDFLAGS="$O_LDFLAGS"
     SUDO_LIBS="${SUDO_LIBS} -lskey"
-    AUTH_OBJS="$AUTH_OBJS rfc1938.o"
+    AUTH_OBJS="$AUTH_OBJS rfc1938.lo"
 fi
 
 dnl
@@ -2469,7 +2469,7 @@ if test ${with_opie-'no'} = "yes"; then
     AC_CHECK_LIB(opie, main, [found=yes], [AC_MSG_WARN([Unable to locate libopie.a, you will have to edit the Makefile and add -L/path/to/opie/lib to SUDO_LDFLAGS])])
     LDFLAGS="$O_LDFLAGS"
     SUDO_LIBS="${SUDO_LIBS} -lopie"
-    AUTH_OBJS="$AUTH_OBJS rfc1938.o"
+    AUTH_OBJS="$AUTH_OBJS rfc1938.lo"
 fi
 
 dnl
@@ -2517,7 +2517,7 @@ if test ${with_passwd-'no'} != "no"; then
     fi
     if test -n "$SECUREWARE"; then
        AC_CHECK_FUNCS(bigcrypt set_auth_parameters initprivs)
-       AUTH_OBJS="$AUTH_OBJS secureware.o"
+       AUTH_OBJS="$AUTH_OBJS secureware.lo"
     fi
 fi
 
@@ -2639,7 +2639,7 @@ dnl Use passwd (and secureware) auth modules?
 dnl
 case "$with_passwd" in
 yes|maybe)
-    AUTH_OBJS="$AUTH_OBJS passwd.o"
+    AUTH_OBJS="$AUTH_OBJS passwd.lo"
     ;;
 *)
     AC_DEFINE(WITHOUT_PASSWD)
@@ -2649,7 +2649,7 @@ yes|maybe)
     ;;
 esac
 AUTH_OBJS=${AUTH_OBJS# }
-_AUTH=`echo "$AUTH_OBJS" | sed 's/\.o//g'`
+_AUTH=`echo "$AUTH_OBJS" | sed 's/\.lo//g'`
 AC_MSG_NOTICE([using the following authentication methods: $_AUTH])
 
 dnl